AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

2Q-7877 Valve Gp- Control (Kit-3rd Valve) Custom Product Support Literature for the 950G Series II and the 962G Series II Wheel Loaders AXR00001-UP (MACHINE) ELECTRICAL AND STARTING SYSTEM Caterpillar SIS



WHEEL LOADER 950G II WHEEL LOADER AXR
 2Q-7877 Valve Gp- Control (Kit-3rd Valve) Custom Product Support Literature for the 950G Series II and the 962G Series II Wheel Loaders AXR00001-UP (MACHINE) SEBC1352 950G II AXR   (2002)

Parts group 950G II:

  For full view, you need register
ELECTRICAL AND STARTING SYSTEM
SENSOR GP
SENSOR GP-POSITION
214-4862 SENSOR GP-POSITION
214-4862 SENSOR GP-POSITION -CONTROL LEVER
S/N AXR1-UP; AXS1-UP
PART OF 2Q-7897 VALVE GP-CONTROL

Information:

(For parts list, see above)

Special Instruction
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Installation of 244-1090 Alarm Gp {7400, 7402, 7407}
Installation of 244-1090 Alarm Gp {7400, 7402, 7407}
Installation of 262-6141 Alarm Gp {7406}
Installation of 262-6141 Alarm Gp {7406}
Troubleshooting
MID 030 - CID 0271 - FMI 03
Caterpillar Monitoring System
MID 030 - CID 0271 - FMI 05
Caterpillar Monitoring System
MID 030 - CID 0271 - FMI 06
Caterpillar Monitoring System
Backup Alarm Always Off
950G Series II Wheel Loader, 962G Series II
Wheel Loader and
IT62G Series II Integrated Toolcarrier Power Train
Backup Alarm Always On
950G Series II Wheel Loader, 962G Series II
Wheel Loader and
IT62G Series II Integrated Toolcarrier Power Train
Engine News
Charging System Troubleshooting Guide Has Been Updated for All Engines {1406, 7569}
Charging System Troubleshooting Guide Has Been Updated for All Engines {1406, 7569}
Operation and Maintenance Manual
Belts - Inspect/Adjust/Replace
IT62G Series II Integrated Toolcarrier and 950G Series II and 962G Series II Wheel Loaders
Special Instruction
Charging System Troubleshooting {1406}
Charging System Troubleshooting {1406}
Procedure for Replacing Regulator Kit on All Engines {1405}
Procedure for Replacing Regulator Kit on All Engines {1405}
Procedure to Install Brush Holder Assembly to End Frame on All Engines {1405}
Procedure to Install Brush Holder Assembly to End Frame on All Engines {1405}
Specifications
Alternator
Alternator - Delco 21SI
Alternator and Air Compressor Mounting Group
3126B Engine for Caterpillar Built Machines
Alternator and Regulator
3126B Engine for Caterpillar Built Machines
Alternator
Alternator - Delco 27SI
Systems Operation
General Information
Alternator - Delco 21SI
Component Description
Alternator - Delco 21SI
Normal Operation
Alternator - Delco 21SI
General Information
Alternator - Delco 27SI
Normal Operation
Alternator - Delco 27SI
Component Description
Alternator - Delco 27SI
Information Release Memo
REMANUFACTURED HEAVY DUTY BRUSHLESS ALTERNATORS
REMANUFACTURED HEAVY DUTY BRUSHLESS ALTERNATORS
Testing and Adjusting
Capacitor - Test
Alternator - Delco 21SI
Diode Assembly - Test
Alternator - Delco 21SI
Brush Length - Check
Alternator - Delco 27SI
Field Winding - Test
Alternator - Delco 21SI
Insulated Screw - Check
Alternator - Delco 21SI
Rectifier - Test
Alternator - Delco 21SI
Regulator - Test
Alternator - Delco 21SI
Stator - Test
Alternator - Delco 21SI
Residual Magnetism - Restore
Alternator - Delco 21SI
Regulator - Test
Alternator - Delco 27SI
Field Winding - Test
Alternator - Delco 27SI
Stator - Test
Alternator - Delco 27SI
Diode Assembly - Test
Alternator - Delco 27SI
Rectifier - Test
Alternator - Delco 27SI
Insulated Screw - Check
Alternator - Delco 27SI
Residual Magnetism - Restore
Alternator - Delco 27SI
Capacitor - Test
Alternator - Delco 27SI
Charging System - Test
3126B Engines
Troubleshooting
Alternator - Noisy Operation
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
General Information
Alternator - Delco 21SI
Charging System
Alternator - Delco 21SI
Charging System
Caterpillar Monitoring System
MID 082 - CID 0168 - FMI 01
950G Series II Wheel Loader and 962G Series II Wheel Loader Electrohydraulic System
MID 082 - CID 0168 - FMI 00
950G Series II Wheel Loader and 962G Series II Wheel Loader Electrohydraulic System
MID 124 - CID 0168 - FMI 00
Machine Security System
MID 124 - CID 0168 - FMI 01
Machine Security System
General Information
Alternator - Delco 27SI
Alternator
Alternator - Delco 27SI
MID 081 - CID 0168 - FMI 00
950G Series II Wheel Loader, 962G Series II
Wheel Loader and
IT62G Series II Integrated Toolcarrier Power Train
MID 081 - CID 0168 - FMI 01
950G Series II Wheel Loader, 962G Series II
Wheel Loader and
IT62G Series II Integrated Toolcarrier Power Train
MID 074 - CID 0168 - FMI 00
Payload Control System (PCS) 2.X
MID 074 - CID 0168 - FMI 01
Payload Control System (PCS) 2.X
MID 074 - CID 0168 - FMI 03
Medium Wheel Loaders (MWL) Payload Control System (PCS) 3.0
MID 074 - CID 0168 - FMI 04
Medium Wheel Loaders (MWL) Payload Control System (PCS) 3.0
Disassembly and Assembly
Alternator - Disassemble
Alternator - Delco 21SI
Alternator - Assemble
Alternator - Delco 21SI
Alternator - Remove and Install
3126B Engines for Caterpillar Built Machines
Alternator - Remove and Install - Engine in Chassis
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Engine Supplement
Alternator - Disassemble
Alternator - Delco 27SI
Alternator - Assemble
Alternator - Delco 27SI
Service Magazine
Charging System Troubleshooting Guide Has Been Updated for All Machines {1406, 7569}
Charging System Troubleshooting Guide Has Been Updated for All Machines {1406, 7569}
Truck Engine News
Coolant/Battery Tester Group Quickly Tests Coolant and Battery Acid {0773, 0785}
2004/12/27
Engine News
Operation and Maintenance Manual
Battery or Battery Cable - Inspect/Replace
IT62G Series II Integrated Toolcarrier and 950G Series II and 962G Series II Wheel Loaders
Battery - Recycle
IT62G Series II Integrated Toolcarrier and 950G Series II and 962G Series II Wheel Loaders
Battery - Clean
IT62G Series II Integrated Toolcarrier and 950G Series II and 962G Series II Wheel Loaders
Battery Hold-Down - Tighten
IT62G Series II Integrated Toolcarrier and 950G Series II and 962G Series II Wheel Loaders
Technical Information Bulletin
Procedure for Starting an Engine in Cold Weather{1000, 1090, 1250, 1348, 1450, 1453, 1456, 1900}
Procedure for Starting an Engine in Cold Weather{1000, 1090, 1250, 1348, 1450, 1453, 1456, 1900}
Recommendations for Battery Charging and Temperatures for Machines and Generator Sets{1401, 751B}
Recommendations for Battery Charging and Temperatures for Machines and Generator Sets{1401, 751B}
Process for Communicating an Incident with a Battery{1401}
Process for Communicating an Incident with a Battery{1401}
Tool Operating Manual
M0077220 (NEHS1231) 115V & 230V Battery Chargers {1401, 751B}
M0077220 (NEHS1231) 115V & 230V Battery Chargers {1401, 751B}
M0090131 Battery Analyzer 480-4181 (484-4859 Group) {0374, 0599, 0709, 1401, 7468}
M0090131 Battery Analyzer 480-4181 (484-4859 Group) {0374, 0599, 0709, 1401, 7468}
Testing and Adjusting
Battery - Test
3126B Engines
Troubleshooting
CID 0168 FMI 02 System Voltage intermittent/erratic
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
CID 0168 FMI 01 System Voltage Low
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
CID 0168 FMI 00 System Voltage High
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
Charging System
Caterpillar Monitoring System
Battery
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
MID 082 - CID 0168 - FMI 01
950G Series II Wheel Loader and 962G Series II Wheel Loader Electrohydraulic System
MID 082 - CID 0168 - FMI 00
950G Series II Wheel Loader and 962G Series II Wheel Loader Electrohydraulic System
Electrical Power Supply Circuit - Test
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
MID 124 - CID 0168 - FMI 00
Machine Security System
MID 124 - CID 0168 - FMI 01
Machine Security System
MID 081 - CID 0168 - FMI 00
950G Series II Wheel Loader, 962G Series II
Wheel Loader and
IT62G Series II Integrated Toolcarrier Power Train
MID 081 - CID 0168 - FMI 01
950G Series II Wheel Loader, 962G Series II
Wheel Loader and
IT62G Series II Integrated Toolcarrier Power Train
MID 074 - CID 0168 - FMI 00
Payload Control System (PCS) 2.X
MID 074 - CID 0168 - FMI 01
Payload Control System (PCS) 2.X
MID 074 - CID 0168 - FMI 03
Medium Wheel Loaders (MWL) Payload Control System (PCS) 3.0
MID 074 - CID 0168 - FMI 04
Medium Wheel Loaders (MWL) Payload Control System (PCS) 3.0
Electrical Power Supply - Test
MSS3s Machine Security System
Service Magazine
Coolant/Battery Tester Group Quickly Tests Coolant and Battery Acid {0773, 0785}
2004/12/27
New Battery Is Now Used as a Service Replacement for Certain Cat<SUP>&reg;</SUP> Products {1401, 1926}
2014/04/24
Tool Operating Manual
Communication Adapter II{0600, 0709, 7600, 7610}
Communication Adapter II{0600, 0709, 7600, 7610}
Using the 4C-8195 Control Service Tool{0374, 0599, 0709, 7490}
Using the 4C-8195 Control Service Tool{0374, 0599, 0709, 7490}
Service Magazine
An Update for Cold Weather Starting Aid on Caterpillar Wheel Loaders is Available {1456, 1902, 7620}
2007/04/09
New Radio Software Is Now Available For Product Link 522 and 523 Radio On All Cat <SUP>&reg;</SUP> Products {7610, 7620}
2014/02/06
Military Electronic Technician (Military ET) Is Now Available For Military Personnel {0374, 0376, 0599, 1000, 7000, 7610, 7620}
Military Electronic Technician (Military ET) Is Now Available For Military Personnel {0374, 0376, 0599, 1000, 7000, 7610, 7620}
Real Time Clock is no Longer Supported {1901}
Real Time Clock is no Longer Supported {1901}
Truck Engine News
Do Not Use the 261-3363 Wireless Communication Adapter with Model Year 2007 Cat Engines and Transmissions in On-Highway Trucks {0785, 1930, 7620}
2007/10/01
Engine News
277-4734 Bypass Harness Assembly Allows Cat Electronic Technician (Cat ET) to Communicate with ADEM IV:E2 Electronic Control Modules {0779, 0785, 1901, 1930}
2006/09/04
The Programmable Monitoring System Parameters Have New Descriptions {1901, 1902, 7620}
2007/10/22
A New Electronic Control Module Wash Out Process {1901, 1920}
A New Electronic Control Module Wash Out Process {1901, 1920}
New CAT Inspect Form Available for EMCP Troubleshooting and Inspection {0374, 4490, 7451, 7620}
New CAT Inspect Form Available for EMCP Troubleshooting and Inspection {0374, 4490, 7451, 7620}
Operation and Maintenance Manual
Welding on Machines and Engines with Electronic Controls
IT62G Series II Integrated Toolcarrier and 950G Series II and 962G Series II Wheel Loaders
Special Instruction
Obtaining Factory Passwords and Software Enabled Attachments{7610, 7620}
Obtaining Factory Passwords and Software Enabled Attachments{7610, 7620}
Using the 217-0114 Adapter Cable As {0709, 1901, 1920}
Using the 217-0114 Adapter Cable As {0709, 1901, 1920}
Instructions for Communicating With and Flashing the <NOBR>10R-4085</NOBR> Engine Electronic Control Gp and the <NOBR>10R-1824</NOBR> Engine Electronic Control Gp {1901, 1920}
Instructions for Communicating With and Flashing the 10R-4085 Engine Electronic Control Gp and the 10R-1824 Engine Electronic Control Gp {1901, 1920}
Diagnostic Code Information for Caterpillar <SUP>&reg;</SUP> Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Diagnostic Code Information for Caterpillar ® Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Procedure to Flash the ADEM 3 Engine Electronic Control Gp {1901, 1920}
Procedure to Flash the ADEM 3 Engine Electronic Control Gp {1901, 1920}
Service Letter-NACD
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE ON CERTAIN 950F, 950G, 950H, 950K, 960F, 962G, 962H, 962H, 962K, 966E, 966F, 966G, 966H, 966H, 966K, 970F, 972G, 972H, 972K, 980C, 980F, 980G, 980H, AND 980K WHEEL LOADERS, IT62G, AND IT62H�INTEGRATED TOOLCARRIERS
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE ON CERTAIN 950F, 950G, 950H, 950K, 960F, 962G, 962H, 962H, 962K, 966E, 966F, 966G, 966H, 966H, 966K, 970F, 972G, 972H, 972K, 980C, 980F, 980G, 980H, AND 980K WHEEL LOADERS, IT62G, AND IT62H�INTEGRATED TOOLCARRIERS
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Technical Information Bulletin
950G Series II Rough Idle and Smoke at Cold Start{1901, 1902}
950G Series II Rough Idle and Smoke at Cold Start{1901, 1902}
Procedure for Starting an Engine in Cold Weather{1000, 1090, 1250, 1348, 1450, 1453, 1456, 1900}
Procedure for Starting an Engine in Cold Weather{1000, 1090, 1250, 1348, 1450, 1453, 1456, 1900}
Service Letter-China
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE ON CERTAIN 950F, 950G, 950H, 950K, 960F, 962G, 962H, 962H, 962K, 966E, 966F, 966G, 966H, 966H, 966K, 970F, 972G, 972H, 972K, 980C, 980F, 980G, 980H, AND 980K WHEEL LOADERS, IT62G, AND IT62H�INTEGRATED TOOLCARRIERS
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE ON CERTAIN 950F, 950G, 950H, 950K, 960F, 962G, 962H, 962H, 962K, 966E, 966F, 966G, 966H, 966H, 966K, 970F, 972G, 972H, 972K, 980C, 980F, 980G, 980H, AND 980K WHEEL LOADERS, IT62G, AND IT62H�INTEGRATED TOOLCARRIERS
Service Letter-Asia
Service Letter-APD
Troubleshooting
ECM Will Not Communicate with Other Systems or Display Modules
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
CID 0268 FMI 02 Check Programmable Parameters
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
Event Codes
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
Self-Diagnostics
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
Flash Programming
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
CID 0254 FMI 12 Electronic Control Module Error
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
Electronic Service Tool Will Not Communicate with ECM
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
CID 0248 FMI 09 Cat Data Link not communicating
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
Cat Data Link Circuit - Test
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
MID 082 - CID 0590 - FMI 09
950G Series II Wheel Loader and 962G Series II Wheel Loader Electrohydraulic System
MID 082 - CID 0590 - FMI 12
950G Series II Wheel Loader and 962G Series II Wheel Loader Electrohydraulic System
Diagnostic Codes
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
System Configuration Parameters
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
System Overview
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
Programming Parameters
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
Replacing the ECM
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
CID 0253 FMI 02 Personality Module mismatch
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
ECM Will Not Accept Factory Passwords
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
Disassembly and Assembly
Electronic Control Module - Remove and Install
3126B Engines for Caterpillar Built Machines
Service Magazine
New Service Information Tool for CAT Dealers is Now Available {1900}
2002/06/17
New Test ECM Available for Machines {0785, 7610}
2004/05/10
New Engine Software Improves Sensor Reliability on Wheel Loaders {7620}
2004/12/20
New Engine Software Eliminates MSS Starting Delay {7620, 7631}
2005/03/14
New Engine Software Is Now Available {1901, 1920, 1929, 7620}
2006/05/22
An Update for Cold Weather Starting Aid on Caterpillar Wheel Loaders is Available {1456, 1902, 7620}
2007/04/09
Update on the Factory Password System {1901, 7620}
2008/02/11
Improved Electronic Control Modules and Engine Electronic Control Groups are Now Used {7610}
2008/04/28
Auto Clearing of Diagnostics and Events from Electronic Control Module (ECM) {1901, 1920, 7610, 7620}
2012/04/17
Updated Flash Procedure for All Caterpillar Products {1920, 7610, 7620}
2014/09/16
New Machine Software for Cat<SUP>&reg;</SUP> Product Link Is Now Available on Certain Cat<SUP>&reg;</SUP> Products {7490, 7606, 7610, 7620}
New Machine Software for Cat® Product Link Is Now Available on Certain Cat® Products {7490, 7606, 7610, 7620}
Real Time Clock is no Longer Supported {1901}
Real Time Clock is no Longer Supported {1901}
Engine News
The Programmable Monitoring System Parameters Have New Descriptions {1901, 1902, 7620}
2007/10/22
Operation and Maintenance Manual
Service Brake Control
IT62G Series II Integrated Toolcarrier and 950G Series II and 962G Series II Wheel Loaders
Welding on Machines and Engines with Electronic Controls
IT62G Series II Integrated Toolcarrier and 950G Series II and 962G Series II Wheel Loaders
Autoshift Control
IT62G Series II Integrated Toolcarrier and 950G Series II and 962G Series II Wheel Loaders
Special Instruction
Obtaining Factory Passwords and Software Enabled Attachments{7610, 7620}
Obtaining Factory Passwords and Software Enabled Attachments{7610, 7620}
Diagnostic Code Information for Caterpillar <SUP>&reg;</SUP> Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Diagnostic Code Information for Caterpillar ® Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Service Letter-NACD
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE ON CERTAIN 950F, 950G, 950H, 950K, 960F, 962G, 962H, 962H, 962K, 966E, 966F, 966G, 966H, 966H, 966K, 970F, 972G, 972H, 972K, 980C, 980F, 980G, 980H, AND 980K WHEEL LOADERS, IT62G, AND IT62H�INTEGRATED TOOLCARRIERS
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE ON CERTAIN 950F, 950G, 950H, 950K, 960F, 962G, 962H, 962H, 962K, 966E, 966F, 966G, 966H, 966H, 966K, 970F, 972G, 972H, 972K, 980C, 980F, 980G, 980H, AND 980K WHEEL LOADERS, IT62G, AND IT62H�INTEGRATED TOOLCARRIERS
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Technical Information Bulletin
Error Codes for the Transmission Output Speed Sensors May Be Logged{3030, 3175, 7610, 7620}
Error Codes for the Transmission Output Speed Sensors May Be Logged{3030, 3175, 7610, 7620}
Flashing Transmission Software May Result in Error Message On Certain Wheel Loaders{7620}
Flashing Transmission Software May Result in Error Message On Certain Wheel Loaders{7620}
Specifications
Pinout Specifications for Electronic Control (Power Train)
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Power Train
Service Letter-China
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE ON CERTAIN 950F, 950G, 950H, 950K, 960F, 962G, 962H, 962H, 962K, 966E, 966F, 966G, 966H, 966H, 966K, 970F, 972G, 972H, 972K, 980C, 980F, 980G, 980H, AND 980K WHEEL LOADERS, IT62G, AND IT62H�INTEGRATED TOOLCARRIERS
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE ON CERTAIN 950F, 950G, 950H, 950K, 960F, 962G, 962H, 962H, 962K, 966E, 966F, 966G, 966H, 966H, 966K, 970F, 972G, 972H, 972K, 980C, 980F, 980G, 980H, AND 980K WHEEL LOADERS, IT62G, AND IT62H�INTEGRATED TOOLCARRIERS
Service Letter-Asia
Systems Operation
General Information
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Power Train
Variable Shift Control
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Power Train
Electronic Control Module (Power Train)
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Power Train
Data Link
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Power Train
Ground Speed Limiter
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Power Train
Power Train Electronic Control System
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Power Train
Autoshift Control
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Power Train
Integrated Braking System
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Power Train
Service Letter-APD
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE ON CERTAIN 950F, 950G, 950H, 950K, 960F, 962G, 962H, 962H, 962K, 966E, 966F, 966G, 966H, 966H, 966K, 970F, 972G, 972H, 972K, 980C, 980F, 980G, 980H, AND 980K WHEEL LOADERS, IT62G, AND IT62H�INTEGRATED TOOLCARRIERS
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE ON CERTAIN 950F, 950G, 950H, 950K, 960F, 962G, 962H, 962H, 962K, 966E, 966F, 966G, 966H, 966H, 966K, 970F, 972G, 972H, 972K, 980C, 980F, 980G, 980H, AND 980K WHEEL LOADERS, IT62G, AND IT62H�INTEGRATED TOOLCARRIERS
Testing and Adjusting
Secondary Steering - Program
950G Series II Wheel Loader, 962G Series II
Wheel Loader and
IT62G Series II Integrated Toolcarrier Power Train
Ride Control Configuration - Program
950G Series II Wheel Loader, 962G Series II
Wheel Loader and
IT62G Series II Integrated Toolcarrier Power Train
Forward High Speed Lockout - Program
950G Series II Wheel Loader, 962G Series II
Wheel Loader and
IT62G Series II Integrated Toolcarrier Power Train
Reverse High Speed Lockout - Program
950G Series II Wheel Loader, 962G Series II
Wheel Loader and
IT62G Series II Integrated Toolcarrier Power Train
Electronic Control Module (ECM) - Replace
950G Series II Wheel Loader, 962G Series II
Wheel Loader and
IT62G Series II Integrated Toolcarrier Power Train
Electronic Control Module (ECM) - Flash Program
950G Series II Wheel Loader, 962G Series II
Wheel Loader and
IT62G Series II Integrated Toolcarrier Power Train
Calibration and Programming
950G Series II Wheel Loader, 962G Series II
Wheel Loader and
IT62G Series II Integrated Toolcarrier Power Train
Transmission Speed for Forward Directional Shift - Program
950G Series II Wheel Loader, 962G Series II
Wheel Loader and
IT62G Series II Integrated Toolcarrier Power Train
Transmission Speed for Reverse Directional Shift - Program
950G Series II Wheel Loader, 962G Series II
Wheel Loader and
IT62G Series II Integrated Toolcarrier Power Train
Troubleshooting
General Information
950G Series II Wheel Loader, 962G Series II
Wheel Loader and
IT62G Series II Integrated Toolcarrier Power Train
CID 0296 FMI 09 Unable to communicate with Transmission ECM
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
MID 082 - CID 0296 - FMI 12
950G Series II Wheel Loader and 962G Series II Wheel Loader Electrohydraulic System
MID 082 - CID 0296 - FMI 09
950G Series II Wheel Loader and 962G Series II Wheel Loader Electrohydraulic System
Service Tools
950G Series II Wheel Loader, 962G Series II
Wheel Loader and
IT62G Series II Integrated Toolcarrier Power Train
Using Caterpillar Electronic Technician to Determine Diagnostic Codes
950G Series II Wheel Loader, 962G Series II
Wheel Loader and
IT62G Series II Integrated Toolcarrier Power Train
Using Caterpillar Monitoring System to Determine Diagnostic Codes
950G Series II Wheel Loader, 962G Series II
Wheel Loader and
IT62G Series II Integrated Toolcarrier Power Train
Diagnostic Code List
950G Series II Wheel Loader, 962G Series II
Wheel Loader and
IT62G Series II Integrated Toolcarrier Power Train
Diagnostic Capabilities
950G Series II Wheel Loader, 962G Series II
Wheel Loader and
IT62G Series II Integrated Toolcarrier Power Train
MID 081 - CID 0268 - FMI 02
950G Series II Wheel Loader, 962G Series II
Wheel Loader and
IT62G Series II Integrated Toolcarrier Power Train
Service Magazine
New Software is Available for Machines that are Equipped with the Integrated Braking System {7620}
2003/01/27
Improved Transmission Neutralizer Software Is Now Being Used on GII Series Medium Wheel Loaders {7620}
2003/10/13
New Test ECM Available for Machines {0785, 7610}
2004/05/10
New Test ECM Available for MAC 14 Drive Train {7610}
2004/10/11
New Transmission Software Is Now Used {7620}
2005/05/16
New Software with Improved Neutralizer Function Is Now Used {7620}
2005/04/04
277-2362 Transmission Analyzer III Group Offers Upgraded Diagnostic Capabilities {0769, 0779, 0783}
2007/10/22
Improved Electronic Control Modules and Engine Electronic Control Groups are Now Used {7610}
2008/04/28
Auto Clearing of Diagnostics and Events from Electronic Control Module (ECM) {1901, 1920, 7610, 7620}
2012/04/17
Updated Flash Procedure for All Caterpillar Products {1920, 7610, 7620}
2014/09/16
Operation and Maintenance Manual
Welding on Machines and Engines with Electronic Controls
IT62G Series II Integrated Toolcarrier and 950G Series II and 962G Series II Wheel Loaders
Aggregate Autodig - If Equipped
IT62G Series II Integrated Toolcarrier and 950G Series II and 962G Series II Wheel Loaders
Special Instruction
Obtaining Factory Passwords and Software Enabled Attachments{7610, 7620}
Obtaining Factory Passwords and Software Enabled Attachments{7610, 7620}
Definitions Of Configuration/Calibration Sections For Medium Wheel Loaders Equipped With Electrohydraulic Controls{7610}
Definitions Of Configuration/Calibration Sections For Medium Wheel Loaders Equipped With Electrohydraulic Controls{7610}
Diagnostic Code Information for Caterpillar <SUP>&reg;</SUP> Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Diagnostic Code Information for Caterpillar ® Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Technical Information Bulletin
The Implement Control System Must Be Configured Before Calibration
The Implement Control System Must Be Configured Before Calibration
Specifications
Implement Electronic Control Pinout Specifications
950G Series II Wheel Loader, 962G Series II
Wheel Loader and IT62G Series II Integrated Toolcarrier Hydraulic System
Systems Operation
Data Link
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Hydraulic System
Implement Electronic Control System
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Hydraulic System
Sensors
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Hydraulic System
Electronic Control Module (Implement)
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Hydraulic System
Switches
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Hydraulic System
Aggregate Autodig
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Hydraulic System
Testing and Adjusting
Electronic Control Module (ECM) - Configure
950G Series II Wheel Loader and 962G Series II Wheel Loader Electrohydraulic System
Implement Hydraulic Service Mode
950G Series II Wheel Loader and 962G Series II Wheel Loader Electrohydraulic System
Electronic Control Module (ECM) - Replace
950G Series II Wheel Loader and 962G Series II Wheel Loader Electrohydraulic System
Electronic Control Module (ECM) - Flash Program
950G Series II Wheel Loader and 962G Series II Wheel Loader Electrohydraulic System
Troubleshooting
General Information
950G Series II Wheel Loader and 962G Series II Wheel Loader Electrohydraulic System
MID 082 - CID 0591 - FMI 12
950G Series II Wheel Loader and 962G Series II Wheel Loader Electrohydraulic System
Diagnostic Code List
950G Series II Wheel Loader and 962G Series II Wheel Loader Electrohydraulic System
MID 082 - CID 1324 - FMI 02
950G Series II Wheel Loader and 962G Series II Wheel Loader Electrohydraulic System
Diagnostic Capabilities
950G Series II Wheel Loader and 962G Series II Wheel Loader Electrohydraulic System
MID 082 - CID 1393 - FMI 04
950G Series II Wheel Loader and 962G Series II Wheel Loader Electrohydraulic System
Service Tools
950G Series II Wheel Loader and 962G Series II Wheel Loader Electrohydraulic System
Using Caterpillar Electronic Technician to Determine Diagnostic Codes
950G Series II Wheel Loader and 962G Series II Wheel Loader Electrohydraulic System
Using Caterpillar Monitoring System to Determine Diagnostic Codes
950G Series II Wheel Loader and 962G Series II Wheel Loader Electrohydraulic System
MID 082 - CID 0268 - FMI 02
950G Series II Wheel Loader and 962G Series II Wheel Loader Electrohydraulic System
Service Magazine
New Test ECM Available for Machines {0785, 7610}
2004/05/10
Implement System Software Enhancements Are Now Used {7620}
2004/05/03
New Implement Software Is Now Available {7620}
2008/08/04
Improved Electronic Control Modules and Engine Electronic Control Groups are Now Used {7610}
2008/04/28
Auto Clearing of Diagnostics and Events from Electronic Control Module (ECM) {1901, 1920, 7610, 7620}
2012/04/17
Updated Flash Procedure for All Caterpillar Products {1920, 7610, 7620}
2014/09/16
Engine News
The Programmable Monitoring System Parameters Have New Descriptions {1901, 1902, 7620}
2007/10/22
New CAT Inspect Form Available for EMCP Troubleshooting and Inspection {0374, 4490, 7451, 7620}
New CAT Inspect Form Available for EMCP Troubleshooting and Inspection {0374, 4490, 7451, 7620}
Special Instruction
Operation of the Machine Security System{7631}
Operation of the Machine Security System{7631}
Obtaining Factory Passwords and Software Enabled Attachments{7610, 7620}
Obtaining Factory Passwords and Software Enabled Attachments{7610, 7620}
Setup of the Machine Security System{7631}
Setup of the Machine Security System{7631}
Installation Instructions for the Machine Security System on the Medium Wheel Loaders{7631}
Installation Instructions for the Machine Security System on the Medium Wheel Loaders{7631}
A Basic Guide for Users of the Caterpillar Machine Security System (MSS){7631}
A Basic Guide for Users of the Caterpillar Machine Security System (MSS){7631}
Installation of the Machine Security System (MSS) Universal Attachment Kit {7631, 7631}
Installation of the Machine Security System (MSS) Universal Attachment Kit {7631, 7631}
Diagnostic Code Information for Caterpillar <SUP>&reg;</SUP> Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Diagnostic Code Information for Caterpillar ® Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Service Letter-NACD
PRODUCT SUPPORT PROGRAM FOR REPLACING CELLULAR PRODUCT LINK DEVICES ON CERTAIN WHEEL LOADERS, INTEGRATED TOOLCARRIERS, LANDFILL COMPACTORS, AND LANDFILL DOZERS
PRODUCT SUPPORT PROGRAM FOR REPLACING CELLULAR PRODUCT LINK DEVICES ON CERTAIN WHEEL LOADERS, INTEGRATED TOOLCARRIERS, LANDFILL COMPACTORS, AND LANDFILL DOZERS
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK PLE601/PLE631/PLE641 ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK PLE601/PLE631/PLE641 ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE ON CERTAIN INTEGRATED TOOLCARRIERS AND WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE ON CERTAIN INTEGRATED TOOLCARRIERS AND WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING PRODUCT LINK PL121 SATELLITE RADIOS ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR REPLACING PRODUCT LINK PL121 SATELLITE RADIOS ON CERTAIN CATERPILLAR PRODUCTS
Service Letter-Australia
PRODUCT SUPPORT PROGRAM FOR REPLACING CELLULAR PRODUCT LINK DEVICES ON CERTAIN WHEEL LOADERS, INTEGRATED TOOLCARRIERS, LANDFILL COMPACTORS, AND LANDFILL DOZERS
PRODUCT SUPPORT PROGRAM FOR REPLACING CELLULAR PRODUCT LINK DEVICES ON CERTAIN WHEEL LOADERS, INTEGRATED TOOLCARRIERS, LANDFILL COMPACTORS, AND LANDFILL DOZERS
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK PLE601/PLE631/PLE641 ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK PLE601/PLE631/PLE641 ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE ON CERTAIN INTEGRATED TOOLCARRIERS AND WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE ON CERTAIN INTEGRATED TOOLCARRIERS AND WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING PRODUCT LINK PL121 SATELLITE RADIOS ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR REPLACING PRODUCT LINK PL121 SATELLITE RADIOS ON CERTAIN CATERPILLAR PRODUCTS
Service Letter-CFEL
PRODUCT SUPPORT PROGRAM FOR REPLACING CELLULAR PRODUCT LINK DEVICES ON CERTAIN WHEEL LOADERS, INTEGRATED TOOLCARRIERS, LANDFILL COMPACTORS, AND LANDFILL DOZERS
PRODUCT SUPPORT PROGRAM FOR REPLACING CELLULAR PRODUCT LINK DEVICES ON CERTAIN WHEEL LOADERS, INTEGRATED TOOLCARRIERS, LANDFILL COMPACTORS, AND LANDFILL DOZERS
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK PLE601/PLE631/PLE641 ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK PLE601/PLE631/PLE641 ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE ON CERTAIN INTEGRATED TOOLCARRIERS AND WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE ON CERTAIN INTEGRATED TOOLCARRIERS AND WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING PRODUCT LINK PL121 SATELLITE RADIOS ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR REPLACING PRODUCT LINK PL121 SATELLITE RADIOS ON CERTAIN CATERPILLAR PRODUCTS
Service Letter-CSARL
PRODUCT SUPPORT PROGRAM FOR REPLACING CELLULAR PRODUCT LINK DEVICES ON CERTAIN WHEEL LOADERS, INTEGRATED TOOLCARRIERS, LANDFILL COMPACTORS, AND LANDFILL DOZERS
PRODUCT SUPPORT PROGRAM FOR REPLACING CELLULAR PRODUCT LINK DEVICES ON CERTAIN WHEEL LOADERS, INTEGRATED TOOLCARRIERS, LANDFILL COMPACTORS, AND LANDFILL DOZERS
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK PLE601/PLE631/PLE641 ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK PLE601/PLE631/PLE641 ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE ON CERTAIN INTEGRATED TOOLCARRIERS AND WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE ON CERTAIN INTEGRATED TOOLCARRIERS AND WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING PRODUCT LINK PL121 SATELLITE RADIOS ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR REPLACING PRODUCT LINK PL121 SATELLITE RADIOS ON CERTAIN CATERPILLAR PRODUCTS
Service Letter-Americas
PRODUCT SUPPORT PROGRAM FOR REPLACING CELLULAR PRODUCT LINK DEVICES ON CERTAIN WHEEL LOADERS, INTEGRATED TOOLCARRIERS, LANDFILL COMPACTORS, AND LANDFILL DOZERS
PRODUCT SUPPORT PROGRAM FOR REPLACING CELLULAR PRODUCT LINK DEVICES ON CERTAIN WHEEL LOADERS, INTEGRATED TOOLCARRIERS, LANDFILL COMPACTORS, AND LANDFILL DOZERS
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK PLE601/PLE631/PLE641 ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK PLE601/PLE631/PLE641 ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE ON CERTAIN INTEGRATED TOOLCARRIERS AND WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE ON CERTAIN INTEGRATED TOOLCARRIERS AND WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING PRODUCT LINK PL121 SATELLITE RADIOS ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR REPLACING PRODUCT LINK PL121 SATELLITE RADIOS ON CERTAIN CATERPILLAR PRODUCTS
Technical Information Bulletin
Machine Security System (MSS) Will Record Erroneous Events (Event 273)
Machine Security System (MSS) Will Record Erroneous Events (Event 273)
Bypass Schedule May Be Affected when Machine Security System (MSS) Automatically Adjusts to North American Daylight Savings Time
Bypass Schedule May Be Affected when Machine Security System (MSS) Automatically Adjusts to North American Daylight Savings Time
Some configuration settings in the Machine Security System (MSS) may change when MSS software release 207-6258 is upgraded to MSS software release 220-6355
Some configuration settings in the Machine Security System (MSS) may change when MSS software release 207-6258 is upgraded to MSS software release 220-6355
Fleet/Key Configuration Issue Using Cat ET Version 2002B
Fleet/Key Configuration Issue Using Cat ET Version 2002B
232-9737 Software Issues with MSS Standalone Time/Date Functions
232-9737 Software Issues with MSS Standalone Time/Date Functions
Tool Operating Manual
Communication Adapter II{0600, 0709, 7600, 7610}
Communication Adapter II{0600, 0709, 7600, 7610}
Service Letter-China
PRODUCT SUPPORT PROGRAM FOR REPLACING CELLULAR PRODUCT LINK DEVICES ON CERTAIN WHEEL LOADERS, INTEGRATED TOOLCARRIERS, LANDFILL COMPACTORS, AND LANDFILL DOZERS
PRODUCT SUPPORT PROGRAM FOR REPLACING CELLULAR PRODUCT LINK DEVICES ON CERTAIN WHEEL LOADERS, INTEGRATED TOOLCARRIERS, LANDFILL COMPACTORS, AND LANDFILL DOZERS
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK PLE601/PLE631/PLE641 ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK PLE601/PLE631/PLE641 ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE ON CERTAIN INTEGRATED TOOLCARRIERS AND WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE ON CERTAIN INTEGRATED TOOLCARRIERS AND WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING PRODUCT LINK PL121 SATELLITE RADIOS ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR REPLACING PRODUCT LINK PL121 SATELLITE RADIOS ON CERTAIN CATERPILLAR PRODUCTS
Service Letter-Asia
PRODUCT SUPPORT PROGRAM FOR REPLACING CELLULAR PRODUCT LINK DEVICES ON CERTAIN WHEEL LOADERS, INTEGRATED TOOLCARRIERS, LANDFILL COMPACTORS, AND LANDFILL DOZERS
PRODUCT SUPPORT PROGRAM FOR REPLACING CELLULAR PRODUCT LINK DEVICES ON CERTAIN WHEEL LOADERS, INTEGRATED TOOLCARRIERS, LANDFILL COMPACTORS, AND LANDFILL DOZERS
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK PLE601/PLE631/PLE641 ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK PLE601/PLE631/PLE641 ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE ON CERTAIN INTEGRATED TOOLCARRIERS AND WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE ON CERTAIN INTEGRATED TOOLCARRIERS AND WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING PRODUCT LINK PL121 SATELLITE RADIOS ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR REPLACING PRODUCT LINK PL121 SATELLITE RADIOS ON CERTAIN CATERPILLAR PRODUCTS
Systems Operation
Operation of Status Indicator
Machine Security System
Protected Functions
Machine Security System
Diagnostic Operation
Machine Security System
Events
Machine Security System
Service Operation Using Machine Security System
Machine Security System
Key Information
Machine Security System
Service Operation Using Service Tool
Machine Security System
Electronic Control Module (ECM)
Machine Security System
System Overview
Machine Security System
Scheduled Access - "Security System Bypass Times"
Machine Security System
General Information
Machine Security System
Normal Operation
Machine Security System
System Components
Machine Security System
Cat Data Link
Machine Security System
General Information
MSS3s Machine Security System
System Overview
MSS3s Machine Security System
Normal Operation
MSS3s Machine Security System
Operation of Status Indicator
MSS3s Machine Security System
Key Information
MSS3s Machine Security System
Scheduled Access - "Security System Bypass Times"
MSS3s Machine Security System
Diagnostic Operation
MSS3s Machine Security System
Events
MSS3s Machine Security System
Protected Functions
MSS3s Machine Security System
Service Operation Using Machine Security System
MSS3s Machine Security System
Service Operation Using Service Tool
MSS3s Machine Security System
Electronic Control Module (ECM)
MSS3s Machine Security System
System Components
MSS3s Machine Security System
Data Links
MSS3s Machine Security System
Service Letter-APD
PRODUCT SUPPORT PROGRAM FOR REPLACING CELLULAR PRODUCT LINK DEVICES ON CERTAIN WHEEL LOADERS, INTEGRATED TOOLCARRIERS, LANDFILL COMPACTORS, AND LANDFILL DOZERS
PRODUCT SUPPORT PROGRAM FOR REPLACING CELLULAR PRODUCT LINK DEVICES ON CERTAIN WHEEL LOADERS, INTEGRATED TOOLCARRIERS, LANDFILL COMPACTORS, AND LANDFILL DOZERS
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK PLE601/PLE631/PLE641 ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK PLE601/PLE631/PLE641 ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE ON CERTAIN INTEGRATED TOOLCARRIERS AND WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE ON CERTAIN INTEGRATED TOOLCARRIERS AND WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING PRODUCT LINK PL121 SATELLITE RADIOS ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR REPLACING PRODUCT LINK PL121 SATELLITE RADIOS ON CERTAIN CATERPILLAR PRODUCTS
Testing and Adjusting
Glossary of Terms
Machine Security System
Key - Program
Machine Security System
System Disarm - Program - Security System Bypass
Machine Security System
General Information
Machine Security System
Electronic Control Module (ECM) - Replace
Machine Security System
Software - Uninstall - "Immobilizer" Feature
Machine Security System
Time - Set
Machine Security System
Product Identification Number - Program
Machine Security System
Electronic Control Module (ECM) - Flash Program
Machine Security System
Factory Password - Obtain
Machine Security System
General Information
MSS3s Machine Security System
Product Identification Number - Program
MSS3s Machine Security System
Key - Program
MSS3s Machine Security System
System Disarm - Program - Security System Bypass
MSS3s Machine Security System
Factory Password - Obtain
MSS3s Machine Security System
Time - Set
MSS3s Machine Security System
Glossary of Terms
MSS3s Machine Security System
Software - Uninstall - "Immobilizer" Feature
MSS3s Machine Security System
Troubleshooting
Using Caterpillar Electronic Technician to Determine Diagnostic Codes
Machine Security System
Lost Key
Machine Security System
Diagnostic Code List
Machine Security System
General Information
Machine Security System
Engine Does Not Crank and Status Indicator Is Green
Machine Security System
Engine Does Not Start and Status Indicator Is Continuously Red
Machine Security System
MID 124 - CID 0248 - FMI 12
Machine Security System
MID 124 - CID 0817 - FMI 04
Machine Security System
MID 124 - CID 1391 - FMI 03
Machine Security System
MID 124 - CID 1391 - FMI 04
Machine Security System
MID 124 - CID 1392 - FMI 03
Machine Security System
MID 124 - CID 1392 - FMI 04
Machine Security System
MID 081 - CID 1639 - FMI 09
950G Series II Wheel Loader, 962G Series II
Wheel Loader and
IT62G Series II Integrated Toolcarrier Power Train
Lost Key (MSS)
MSS3s Machine Security System
Engine Does Not Crank and Status Indicator Is Green
MSS3s Machine Security System
Engine Does Not Start and Status Indicator Is Continuously Red
MSS3s Machine Security System
ECM Output Driver - Test
MSS3s Machine Security System
ECM Software - Install
MSS3s Machine Security System
ECM - Replace
MSS3s Machine Security System
ECM - Configure
MSS3s Machine Security System
Service Magazine
Correction to Service Manual for the Machine Security System (MSS) {7631}
2002/04/08
New Flash File Is Used for Machine Security System (MSS) {7631}
2002/08/26
New Software Released for Machine Security System (MSS) {7620}
2003/06/09
New Flash File Available For Machines Equipped With Machine Security System (MSS) {7620}
2008/11/17
New Engine Software Eliminates MSS Starting Delay {7620, 7631}
2005/03/14
Update to Daylight Savings Time in Machine Security System (MSS) {7631}
2007/02/26
A New Version of Caterpillar Electronic Technician (ET) is Now Available {0785, 7600, 7610}
2008/05/19
Improved Electronic Control Modules and Engine Electronic Control Groups are Now Used {7610}
2008/04/28
New Firmware Is Now Available for Communications Adapter 3 {7610, 7620}
2011/10/20
Auto Clearing of Diagnostics and Events from Electronic Control Module (ECM) {1901, 1920, 7610, 7620}
2012/04/17
Updated Flash Procedure for All Caterpillar Products {1920, 7610, 7620}
2014/09/16
Military Electronic Technician (Military ET) Is Now Available For Military Personnel {0374, 0376, 0599, 1000, 7000, 7610, 7620}
Military Electronic Technician (Military ET) Is Now Available For Military Personnel {0374, 0376, 0599, 1000, 7000, 7610, 7620}
New Machine Software for Cat<SUP>&reg;</SUP> Product Link Is Now Available on Certain Cat<SUP>&reg;</SUP> Products {7490, 7606, 7610, 7620}
New Machine Software for Cat® Product Link Is Now Available on Certain Cat® Products {7490, 7606, 7610, 7620}
Service Letter-NACD
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK PLE601/PLE631/PLE641 ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK PLE601/PLE631/PLE641 ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE ON CERTAIN INTEGRATED TOOLCARRIERS AND WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE ON CERTAIN INTEGRATED TOOLCARRIERS AND WHEEL LOADERS
Service Letter-Australia
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK PLE601/PLE631/PLE641 ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK PLE601/PLE631/PLE641 ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE ON CERTAIN INTEGRATED TOOLCARRIERS AND WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE ON CERTAIN INTEGRATED TOOLCARRIERS AND WHEEL LOADERS
Service Letter-CFEL
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK PLE601/PLE631/PLE641 ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK PLE601/PLE631/PLE641 ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE ON CERTAIN INTEGRATED TOOLCARRIERS AND WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE ON CERTAIN INTEGRATED TOOLCARRIERS AND WHEEL LOADERS
Service Letter-CSARL
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK PLE601/PLE631/PLE641 ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK PLE601/PLE631/PLE641 ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE ON CERTAIN INTEGRATED TOOLCARRIERS AND WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE ON CERTAIN INTEGRATED TOOLCARRIERS AND WHEEL LOADERS
Service Letter-Americas
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK PLE601/PLE631/PLE641 ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK PLE601/PLE631/PLE641 ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE ON CERTAIN INTEGRATED TOOLCARRIERS AND WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE ON CERTAIN INTEGRATED TOOLCARRIERS AND WHEEL LOADERS
Service Letter-China
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK PLE601/PLE631/PLE641 ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK PLE601/PLE631/PLE641 ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE ON CERTAIN INTEGRATED TOOLCARRIERS AND WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE ON CERTAIN INTEGRATED TOOLCARRIERS AND WHEEL LOADERS
Service Letter-Asia
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK PLE601/PLE631/PLE641 ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK PLE601/PLE631/PLE641 ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE ON CERTAIN INTEGRATED TOOLCARRIERS AND WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE ON CERTAIN INTEGRATED TOOLCARRIERS AND WHEEL LOADERS
Service Letter-APD
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK PLE601/PLE631/PLE641 ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK PLE601/PLE631/PLE641 ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE ON CERTAIN INTEGRATED TOOLCARRIERS AND WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE ON CERTAIN INTEGRATED TOOLCARRIERS AND WHEEL LOADERS
Testing and Adjusting
Electronic Control Module (ECM) - Replace
Machine Security System
Electronic Control Module (ECM) - Flash Program
Machine Security System
Service Magazine
New Software is Available for Machines that are Equipped with the Integrated Braking System {7620}
2003/01/27
Special Instruction
Obtaining Factory Passwords and Software Enabled Attachments{7610, 7620}
Obtaining Factory Passwords and Software Enabled Attachments{7610, 7620}
Cat<SUP>&reg;</SUP> VIMS Converter Functionality {7610, 7620}
Cat® VIMS Converter Functionality {7610, 7620}
2 Wire and 4 Wire Ethernet Repair Procedure on All Cat<SUP>&reg;</SUP> Products {1408}
2 Wire and 4 Wire Ethernet Repair Procedure on All Cat® Products {1408}
Installation Procedure to Retrofit a PL321VSR Electronic Control Module (ECM) With a Pro Product Link PL641 or PL631 or PL542 Systems {7606}
Installation Procedure to Retrofit a PL321VSR Electronic Control Module (ECM) With a Pro Product Link PL641 or PL631 or PL542 Systems {7606}
Installation Procedure to Retrofit a PL522 or PL523 With a Pro Product Link PL641 or PL631 or PL542 System {7606}
Installation Procedure to Retrofit a PL522 or PL523 With a Pro Product Link PL641 or PL631 or PL542 System {7606}
Service Magazine
Improved Electronic Control Modules and Engine Electronic Control Groups are Now Used {7610}
2008/04/28
Auto Clearing of Diagnostics and Events from Electronic Control Module (ECM) {1901, 1920, 7610, 7620}
2012/04/17
"Maintenance Mode" in Product Link is Used to Prevent Codes From Being Transmitted When Performing Service to a Machine or Engine {7606}
2014/11/24
Instructions for Preventing Utilization Messages Being Reported with Duplicate Time Stamps from PL321VSR Satellite Devices {7601}
2015/09/02
New Software Is Now Available for Cat<SUP>&reg;</SUP> Product Link {7606, 7610, 7620}
New Software Is Now Available for Cat® Product Link {7606, 7610, 7620}
New Machine Software for Cat<SUP>&reg;</SUP> Product Link Is Now Available on Certain Cat<SUP>&reg;</SUP> Products {7490, 7606, 7610, 7620}
New Machine Software for Cat® Product Link Is Now Available on Certain Cat® Products {7490, 7606, 7610, 7620}
A New Special Instruction for Installation Procedure to Retrofit a PL321VSR Electronic Control Module (ECM) With a Pro Product Link PL641 or PL631 or PL542 Systems is Now Available {7606}
A New Special Instruction for Installation Procedure to Retrofit a PL321VSR Electronic Control Module (ECM) With a Pro Product Link PL641 or PL631 or PL542 Systems is Now Available {7606}
A New Special Instruction for Installation Procedure to Retrofit a PL522 or PL523 With a Pro Product Link PL641 or PL631 or PL542 Systems is Now Available {7606}
A New Special Instruction for Installation Procedure to Retrofit a PL522 or PL523 With a Pro Product Link PL641 or PL631 or PL542 Systems is Now Available {7606}
Event Identification Number (EID) Above 60000 is Now Used on All Cat<SUP>&reg;</SUP> Products {1400}
Event Identification Number (EID) Above 60000 is Now Used on All Cat® Products {1400}
Correction to Service Magazine, &quot;Improved 24 Volt Horns Available&quot; {7402}
2001/08/20
Special Instruction
Installation of CAESultra for Landfill Compactors, Motor Graders, Wheel Dozers, and Wheel Loaders{1408, 7009, 7010, 7338, 733T, 7490, 7604}
Installation of CAESultra for Landfill Compactors, Motor Graders, Wheel Dozers, and Wheel Loaders{1408, 7009, 7010, 7338, 733T, 7490, 7604}
Service Magazine
Update to the Testing and Adjusting , "Limit Switch (Stop Light) - Adjust" {1432, 1435, 4269}
2009/03/02
A New Halogen Lamp Is Now Available for Certain Cat Products {1434}
2011/06/29
Technical Information Bulletin
Machine Security System (MSS) Will Record Erroneous Events (Event 273)
Machine Security System (MSS) Will Record Erroneous Events (Event 273)
Specifications
Relay (Secondary Steering Motor)
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Steering System
Service Magazine
The Length of the Wires Leading to the Wiper Motor Have Been Lengthened to Improve Reliability {5927, 7305}
2005/12/19
An Improved Starting Motor is Now Available {1453}
2009/10/15
Special Instruction
Circuit Breaker Harness Assembly {1420}
Circuit Breaker Harness Assembly {1420}
Operation and Maintenance Manual
Engine Starting with Auxiliary Start Receptacle
IT62G Series II Integrated Toolcarrier and 950G Series II and 962G Series II Wheel Loaders
Service Magazine
Parts are Now Available to Make Jump Start Receptacle on Cat<SUP>&reg;</SUP> Product {1463}
2014/03/04
Specifications
Fuel Level Sender
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Machine Systems
Systems Operation
Senders
Caterpillar Monitoring System
Troubleshooting
MID 030 - CID 0096 - FMI 03
Caterpillar Monitoring System
MID 030 - CID 0096 - FMI 08
Caterpillar Monitoring System
MID 030 - CID 0177 - FMI 04
Caterpillar Monitoring System
MID 030 - CID 0177 - FMI 08
Caterpillar Monitoring System
MID 030 - CID 0600 - FMI 04
Caterpillar Monitoring System
MID 030 - CID 0600 - FMI 08
Caterpillar Monitoring System
Temperature Sender
Caterpillar Monitoring System
Fuel Level Sender
Caterpillar Monitoring System
MID 030 - CID 0096 - FMI 04
Caterpillar Monitoring System
MID 030 - CID 0600 - FMI 03
Caterpillar Monitoring System
Service Magazine
Improvements to the Fuel Sender Group {1273, 1408, 6201, 7481, 7857}
2009/07/27
Special Instruction
Selecting Correct Part Numbers For Sensors and Adapter Harnesses for Certain Machines and Engines{1408, 1439}
Selecting Correct Part Numbers For Sensors and Adapter Harnesses for Certain Machines and Engines{1408, 1439}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Service Letter-NACD
PRODUCT SUPPORT PROGRAM FOR REPLACING THE INJECTION ACTUATION PRESSURE SENSOR ON CERTAIN 938G-II, 950G-II, 962G-II WHEEL LOADERS AND IT62G-II, IT38G-II INTEGRATED TOOLCARRIERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE INJECTION ACTUATION PRESSURE SENSOR ON CERTAIN 938G-II, 950G-II, 962G-II WHEEL LOADERS AND IT62G-II, IT38G-II INTEGRATED TOOLCARRIERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE ROTARY POSITION SENSOR ON THE THIRD LEVER IMPLEMENT CONTROL ON CERTAIN 950G II, 962GII, 966G II, 972G II, AND 980G II WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE ROTARY POSITION SENSOR ON THE THIRD LEVER IMPLEMENT CONTROL ON CERTAIN 950G II, 962GII, 966G II, 972G II, AND 980G II WHEEL LOADERS
Service Letter-Australia
PRODUCT SUPPORT PROGRAM FOR REPLACING THE INJECTION ACTUATION PRESSURE SENSOR ON CERTAIN 938G-II, 950G-II, 962G-II WHEEL LOADERS AND IT62G-II, IT38G-II INTEGRATED TOOLCARRIERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE INJECTION ACTUATION PRESSURE SENSOR ON CERTAIN 938G-II, 950G-II, 962G-II WHEEL LOADERS AND IT62G-II, IT38G-II INTEGRATED TOOLCARRIERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE ROTARY POSITION SENSOR ON THE THIRD LEVER IMPLEMENT CONTROL ON CERTAIN 950G II, 962GII, 966G II, 972G II, AND 980G II WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE ROTARY POSITION SENSOR ON THE THIRD LEVER IMPLEMENT CONTROL ON CERTAIN 950G II, 962GII, 966G II, 972G II, AND 980G II WHEEL LOADERS
Service Letter-CFEL
PRODUCT SUPPORT PROGRAM FOR REPLACING THE INJECTION ACTUATION PRESSURE SENSOR ON CERTAIN 938G-II, 950G-II, 962G-II WHEEL LOADERS AND IT62G-II, IT38G-II INTEGRATED TOOLCARRIERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE INJECTION ACTUATION PRESSURE SENSOR ON CERTAIN 938G-II, 950G-II, 962G-II WHEEL LOADERS AND IT62G-II, IT38G-II INTEGRATED TOOLCARRIERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE ROTARY POSITION SENSOR ON THE THIRD LEVER IMPLEMENT CONTROL ON CERTAIN 950G II, 962GII, 966G II, 972G II, AND 980G II WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE ROTARY POSITION SENSOR ON THE THIRD LEVER IMPLEMENT CONTROL ON CERTAIN 950G II, 962GII, 966G II, 972G II, AND 980G II WHEEL LOADERS
Service Letter-CSARL
PRODUCT SUPPORT PROGRAM FOR REPLACING THE INJECTION ACTUATION PRESSURE SENSOR ON CERTAIN 938G-II, 950G-II, 962G-II WHEEL LOADERS AND IT62G-II, IT38G-II INTEGRATED TOOLCARRIERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE INJECTION ACTUATION PRESSURE SENSOR ON CERTAIN 938G-II, 950G-II, 962G-II WHEEL LOADERS AND IT62G-II, IT38G-II INTEGRATED TOOLCARRIERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE ROTARY POSITION SENSOR ON THE THIRD LEVER IMPLEMENT CONTROL ON CERTAIN 950G II, 962GII, 966G II, 972G II, AND 980G II WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE ROTARY POSITION SENSOR ON THE THIRD LEVER IMPLEMENT CONTROL ON CERTAIN 950G II, 962GII, 966G II, 972G II, AND 980G II WHEEL LOADERS
Service Letter-Americas
PRODUCT SUPPORT PROGRAM FOR REPLACING THE INJECTION ACTUATION PRESSURE SENSOR ON CERTAIN 938G-II, 950G-II, 962G-II WHEEL LOADERS AND IT62G-II, IT38G-II INTEGRATED TOOLCARRIERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE INJECTION ACTUATION PRESSURE SENSOR ON CERTAIN 938G-II, 950G-II, 962G-II WHEEL LOADERS AND IT62G-II, IT38G-II INTEGRATED TOOLCARRIERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE ROTARY POSITION SENSOR ON THE THIRD LEVER IMPLEMENT CONTROL ON CERTAIN 950G II, 962GII, 966G II, 972G II, AND 980G II WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE ROTARY POSITION SENSOR ON THE THIRD LEVER IMPLEMENT CONTROL ON CERTAIN 950G II, 962GII, 966G II, 972G II, AND 980G II WHEEL LOADERS
Technical Information Bulletin
Transmission and Torque Converter Temperature Sensor Replacement
Transmission and Torque Converter Temperature Sensor Replacement
Error Codes for the Transmission Output Speed Sensors May Be Logged{3030, 3175, 7610, 7620}
Error Codes for the Transmission Output Speed Sensors May Be Logged{3030, 3175, 7610, 7620}
An Intermittent Rotary Position Sensor Signal Can Cause The Transmission To Neutralize Or The Impeller Clutch Loss Of Power{3134, 3191, 5737}
An Intermittent Rotary Position Sensor Signal Can Cause The Transmission To Neutralize Or The Impeller Clutch Loss Of Power{3134, 3191, 5737}
Specifications
Engine Oil Pressure Sensor - If Equipped
3126B Engine for Caterpillar Built Machines
Atmospheric Pressure Sensor - If Equipped
3126B Engine for Caterpillar Built Machines
Inlet Air Temperature Sensor
3126B Engine for Caterpillar Built Machines
Injection Actuation Pressure Sensor
3126B Engine for Caterpillar Built Machines
Speed Sensor (Torque Converter Output)
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Power Train
Speed Sensor (Transmission Output)
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Power Train
Speed Sensor (Torque Converter Output)
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Power Train
Coolant Temperature Sensor
3126B Engine for Caterpillar Built Machines
Engine Oil Temperature Sensor
3126B Engine for Caterpillar Built Machines
Fuel Pressure Sensor
3126B Engine for Caterpillar Built Machines
Speed/Timing Sensor
3126B Engine for Caterpillar Built Machines
Turbocharger Outlet Pressure Sensor
3126B Engine for Caterpillar Built Machines
Turbocharger Inlet Pressure Sensor
3126B Engine for Caterpillar Built Machines
Position Sensor (Left Brake Pedal)
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Braking System
Position Sensor (Throttle)
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Machine Systems
Temperature Sensor (Transmission Lubrication Oil)
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Power Train
Temperature Sensor (Torque Converter Oil)
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Power Train
Temperature Sensor (Transmission Oil)
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Power Train
Speed Sensor
3126B Engine for Caterpillar Built Machines
Temperature Sensor (Hydraulic Oil)
950G Series II Wheel Loader, 962G Series II
Wheel Loader and IT62G Series II Integrated Toolcarrier Hydraulic System
Tool Operating Manual
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Service Letter-China
PRODUCT SUPPORT PROGRAM FOR REPLACING THE INJECTION ACTUATION PRESSURE SENSOR ON CERTAIN 938G-II, 950G-II, 962G-II WHEEL LOADERS AND IT62G-II, IT38G-II INTEGRATED TOOLCARRIERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE INJECTION ACTUATION PRESSURE SENSOR ON CERTAIN 938G-II, 950G-II, 962G-II WHEEL LOADERS AND IT62G-II, IT38G-II INTEGRATED TOOLCARRIERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE ROTARY POSITION SENSOR ON THE THIRD LEVER IMPLEMENT CONTROL ON CERTAIN 950G II, 962GII, 966G II, 972G II, AND 980G II WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE ROTARY POSITION SENSOR ON THE THIRD LEVER IMPLEMENT CONTROL ON CERTAIN 950G II, 962GII, 966G II, 972G II, AND 980G II WHEEL LOADERS
Service Letter-Asia
PRODUCT SUPPORT PROGRAM FOR REPLACING THE INJECTION ACTUATION PRESSURE SENSOR ON CERTAIN 938G-II, 950G-II, 962G-II WHEEL LOADERS AND IT62G-II, IT38G-II INTEGRATED TOOLCARRIERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE INJECTION ACTUATION PRESSURE SENSOR ON CERTAIN 938G-II, 950G-II, 962G-II WHEEL LOADERS AND IT62G-II, IT38G-II INTEGRATED TOOLCARRIERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE ROTARY POSITION SENSOR ON THE THIRD LEVER IMPLEMENT CONTROL ON CERTAIN 950G II, 962GII, 966G II, 972G II, AND 980G II WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE ROTARY POSITION SENSOR ON THE THIRD LEVER IMPLEMENT CONTROL ON CERTAIN 950G II, 962GII, 966G II, 972G II, AND 980G II WHEEL LOADERS
Systems Operation
Sensors
Caterpillar Monitoring System
Sensors
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Hydraulic System
Position Sensor (Left Brake Pedal)
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Braking System
Sensors
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Power Train
Sensors
Payload Control System (PCS) 2.X
Reuse And Salvage Guidelines
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Custom Service Information
Replacement of the 124-4672 Pressure Sensor for the Payload Control System {1439, 7494}
Replacement of the 124-4672 Pressure Sensor for the Payload Control System {1439, 7494}
Service Letter-APD
PRODUCT SUPPORT PROGRAM FOR REPLACING THE INJECTION ACTUATION PRESSURE SENSOR ON CERTAIN 938G-II, 950G-II, 962G-II WHEEL LOADERS AND IT62G-II, IT38G-II INTEGRATED TOOLCARRIERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE INJECTION ACTUATION PRESSURE SENSOR ON CERTAIN 938G-II, 950G-II, 962G-II WHEEL LOADERS AND IT62G-II, IT38G-II INTEGRATED TOOLCARRIERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE ROTARY POSITION SENSOR ON THE THIRD LEVER IMPLEMENT CONTROL ON CERTAIN 950G II, 962GII, 966G II, 972G II, AND 980G II WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE ROTARY POSITION SENSOR ON THE THIRD LEVER IMPLEMENT CONTROL ON CERTAIN 950G II, 962GII, 966G II, 972G II, AND 980G II WHEEL LOADERS
Testing and Adjusting
Speed Sensor - Adjust
950G Series II Wheel Loader, 962G Series II
Wheel Loader and
IT62G Series II Integrated Toolcarrier Power Train
Position Sensor for the Control Lever (Electronic Technician) - Calibrate
950G Series II Wheel Loader and 962G Series II Wheel Loader Electrohydraulic System
Position Sensor for the Tilt Linkage (Caterpillar Monitoring System) - Calibrate
950G Series II Wheel Loader and 962G Series II Wheel Loader Electrohydraulic System
Position Sensor for the Tilt Linkage (Electronic Technician) - Calibrate
950G Series II Wheel Loader and 962G Series II Wheel Loader Electrohydraulic System
Calibration
950G Series II Wheel Loader and 962G Series II Wheel Loader Electrohydraulic System
Position Sensor for the Control Lever (Caterpillar Monitoring System) - Calibrate
950G Series II Wheel Loader and 962G Series II Wheel Loader Electrohydraulic System
Position Sensor for the Lift Linkage (Electronic Technician) - Calibrate
950G Series II Wheel Loader and 962G Series II Wheel Loader Electrohydraulic System
Position Sensor for the Lift Linkage (Caterpillar Monitoring System) - Calibrate
950G Series II Wheel Loader and 962G Series II Wheel Loader Electrohydraulic System
Position Sensor (Left Brake Pedal) (Caterpillar Monitoring System) - Calibrate
950G Series II Wheel Loader, 962G Series II
Wheel Loader and
IT62G Series II Integrated Toolcarrier Power Train
Calibration and Programming
950G Series II Wheel Loader, 962G Series II
Wheel Loader and
IT62G Series II Integrated Toolcarrier Power Train
Position Sensor for the Joystick Control (Caterpillar Monitoring System) - Calibrate
950G Series II Wheel Loader and 962G Series II Wheel Loader Electrohydraulic System
Position Sensor for the Joystick Control (Electronic Technician) - Calibrate
950G Series II Wheel Loader and 962G Series II Wheel Loader Electrohydraulic System
Position Sensor (Lift Linkage) - Adjust
Payload Control System (PCS) 2.X
Troubleshooting
CID 0261 FMI 13 Engine Timing Calibration required
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
CID 0100 FMI 03 Engine Oil Pressure open/short to +batt
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
CID 0100 FMI 04 Engine Oil Pressure short to ground
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
CID 0172 FMI 03 Intake Manifold Air Temp open/short to +batt
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
CID 0172 FMI 04 Intake Manifold Air Temp short to ground
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
CID 0262 FMI 04 5 Volt Sensor DC Power Supply short to ground
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
CID 0273 FMI 03 Turbo Outlet Pressure open/short to +batt
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
CID 0273 FMI 04 Turbo Outlet Pressure short to ground
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
CID 0274 FMI 03 Atmospheric Pressure open/short to +batt
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
CID 0274 FMI 04 Atmospheric Pressure short to ground
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
CID 0041 FMI 04 8 Volt DC Supply short to ground
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
CID 0091 FMI 08 Throttle Position signal abnormal
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
MID 030 - CID 0110 - FMI 08
Caterpillar Monitoring System
MID 030 - CID 0100 - FMI 08
Caterpillar Monitoring System
MID 030 - CID 0110 - FMI 04
Caterpillar Monitoring System
MID 030 - CID 0177 - FMI 04
Caterpillar Monitoring System
MID 030 - CID 0177 - FMI 08
Caterpillar Monitoring System
MID 030 - CID 0263 - FMI 03
Caterpillar Monitoring System
MID 030 - CID 0263 - FMI 04
Caterpillar Monitoring System
Sensor Dynamic Operation
Caterpillar Monitoring System
Pulse Width Modulated Sensor
Caterpillar Monitoring System
CID 0094 FMI 03 Fuel Pressure open/short to +batt
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
CID 0094 FMI 04 Fuel Pressure short to ground
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
CID 0110 FMI 03 Engine Coolant Temperature open/short to +batt
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
CID 0110 FMI 04 Engine Coolant Temperature short to ground
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
CID 0164 FMI 00 High Injector Actuation Pressure
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
CID 0164 FMI 03 Injector Actuation Pressure voltage high
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
CID 0175 FMI 03 Engine Oil Temperature open/short to +batt
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
MID 030 - CID 0830 - FMI 08
Caterpillar Monitoring System
CID 0175 FMI 04 Engine Oil Temperature short to ground
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
Sensor Signal Voltage
Caterpillar Monitoring System
MID 030 - CID 0427 - FMI 08
Caterpillar Monitoring System
MID 030 - CID 0428 - FMI 08
Caterpillar Monitoring System
MID 030 - CID 0826 - FMI 08
Caterpillar Monitoring System
CID 0041 FMI 03 8 Volt DC Supply short to +batt
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
CID 0164 FMI 11 Injector Actuation Pressure system fault
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
CID 0190 FMI 02 Loss of Engine Speed Signal
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
CID 0190 FMI 11 Engine Speed Sensor mechanical failure
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
Engine Speed/Timing Sensor Circuit - Test
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
Engine Speed/Timing Sensor - Calibrate
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
MID 082 - CID 0351 - FMI 03
950G Series II Wheel Loader and 962G Series II Wheel Loader Electrohydraulic System
MID 082 - CID 0351 - FMI 00
950G Series II Wheel Loader and 962G Series II Wheel Loader Electrohydraulic System
MID 082 - CID 0351 - FMI 01
950G Series II Wheel Loader and 962G Series II Wheel Loader Electrohydraulic System
MID 082 - CID 0351 - FMI 04
950G Series II Wheel Loader and 962G Series II Wheel Loader Electrohydraulic System
MID 082 - CID 0351 - FMI 08
950G Series II Wheel Loader and 962G Series II Wheel Loader Electrohydraulic System
MID 082 - CID 0351 - FMI 13
950G Series II Wheel Loader and 962G Series II Wheel Loader Electrohydraulic System
MID 082 - CID 0352 - FMI 00
950G Series II Wheel Loader and 962G Series II Wheel Loader Electrohydraulic System
MID 082 - CID 0352 - FMI 01
950G Series II Wheel Loader and 962G Series II Wheel Loader Electrohydraulic System
MID 082 - CID 0352 - FMI 03
950G Series II Wheel Loader and 962G Series II Wheel Loader Electrohydraulic System
MID 082 - CID 0352 - FMI 04
950G Series II Wheel Loader and 962G Series II Wheel Loader Electrohydraulic System
MID 082 - CID 0352 - FMI 08
950G Series II Wheel Loader and 962G Series II Wheel Loader Electrohydraulic System
MID 082 - CID 0352 - FMI 13
950G Series II Wheel Loader and 962G Series II Wheel Loader Electrohydraulic System
MID 082 - CID 0487 - FMI 13
950G Series II Wheel Loader and 962G Series II Wheel Loader Electrohydraulic System
MID 082 - CID 0353 - FMI 13
950G Series II Wheel Loader and 962G Series II Wheel Loader Electrohydraulic System
MID 082 - CID 0353 - FMI 00
950G Series II Wheel Loader and 962G Series II Wheel Loader Electrohydraulic System
MID 082 - CID 0353 - FMI 03
950G Series II Wheel Loader and 962G Series II Wheel Loader Electrohydraulic System
MID 082 - CID 0353 - FMI 04
950G Series II Wheel Loader and 962G Series II Wheel Loader Electrohydraulic System
MID 082 - CID 0353 - FMI 08
950G Series II Wheel Loader and 962G Series II Wheel Loader Electrohydraulic System
MID 082 - CID 0364 - FMI 02
950G Series II Wheel Loader and 962G Series II Wheel Loader Electrohydraulic System
MID 082 - CID 0487 - FMI 00
950G Series II Wheel Loader and 962G Series II Wheel Loader Electrohydraulic System
MID 082 - CID 0487 - FMI 01
950G Series II Wheel Loader and 962G Series II Wheel Loader Electrohydraulic System
MID 082 - CID 0487 - FMI 03
950G Series II Wheel Loader and 962G Series II Wheel Loader Electrohydraulic System
MID 082 - CID 0487 - FMI 04
950G Series II Wheel Loader and 962G Series II Wheel Loader Electrohydraulic System
MID 082 - CID 0487 - FMI 08
950G Series II Wheel Loader and 962G Series II Wheel Loader Electrohydraulic System
MID 082 - CID 0364 - FMI 08
950G Series II Wheel Loader and 962G Series II Wheel Loader Electrohydraulic System
MID 082 - CID 0350 - FMI 00
950G Series II Wheel Loader and 962G Series II Wheel Loader Electrohydraulic System
MID 082 - CID 0350 - FMI 01
950G Series II Wheel Loader and 962G Series II Wheel Loader Electrohydraulic System
MID 082 - CID 0350 - FMI 03
950G Series II Wheel Loader and 962G Series II Wheel Loader Electrohydraulic System
MID 082 - CID 0350 - FMI 04
950G Series II Wheel Loader and 962G Series II Wheel Loader Electrohydraulic System
MID 082 - CID 0350 - FMI 08
950G Series II Wheel Loader and 962G Series II Wheel Loader Electrohydraulic System
MID 082 - CID 0350 - FMI 13
950G Series II Wheel Loader and 962G Series II Wheel Loader Electrohydraulic System
MID 081 - CID 0041 - FMI 04
950G Series II Wheel Loader, 962G Series II
Wheel Loader and
IT62G Series II Integrated Toolcarrier Power Train
MID 081 - CID 0041 - FMI 03
950G Series II Wheel Loader, 962G Series II
Wheel Loader and
IT62G Series II Integrated Toolcarrier Power Train
MID 081 - CID 1327 - FMI 03
950G Series II Wheel Loader, 962G Series II
Wheel Loader and
IT62G Series II Integrated Toolcarrier Power Train
MID 081 - CID 1327 - FMI 04
950G Series II Wheel Loader, 962G Series II
Wheel Loader and
IT62G Series II Integrated Toolcarrier Power Train
MID 081 - CID 1327 - FMI 13
950G Series II Wheel Loader, 962G Series II
Wheel Loader and
IT62G Series II Integrated Toolcarrier Power Train
MID 082 - CID 0353 - FMI 01
950G Series II Wheel Loader and 962G Series II Wheel Loader Electrohydraulic System
Digital Sensor Supply Circuit - Test
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
Throttle Position Sensor Circuit - Test
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
CID 1582 FMI 03 Trans Lube Oil Temp Sensor open/short to +batt
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
CID 1582 FMI 04 Trans Lube Oil Temp Sensor short to ground
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
CID 1589 FMI 03 Turbo Inlet Air Pressure Sensor open/shrt to +bat
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
Sensors and Electrical Connectors
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
CID 0342 FMI 03 Secondary Engine Speed open/short to +batt
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
Analog Sensor Supply Circuit - Test
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
5 Volt Engine Pressure Sensor Supply Circuit - Test
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
CID 0164 FMI 02 Injector Actuation Pressure signal erratic
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
CID 0342 FMI 02 Loss of Secondary Engine Speed signal
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
CID 0164 FMI 04 Injector Actuation Pressure voltage low
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
Engine Pressure Sensor Open or Short Circuit - Test
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
CID 0342 FMI 11 Secondary Engine Speed Sensor mechanical failure
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
Injection Actuation Pressure Sensor - Test
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
MID 030 - CID 0826 - FMI 03
Caterpillar Monitoring System
MID 030 - CID 0826 - FMI 04
Caterpillar Monitoring System
Engine Temperature Sensor Open or Short Circuit - Test
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
MID 081 - CID 0177 - FMI 03
950G Series II Wheel Loader, 962G Series II
Wheel Loader and
IT62G Series II Integrated Toolcarrier Power Train
MID 081 - CID 0177 - FMI 04
950G Series II Wheel Loader, 962G Series II
Wheel Loader and
IT62G Series II Integrated Toolcarrier Power Train
MID 081 - CID 0190 - FMI 02
950G Series II Wheel Loader, 962G Series II
Wheel Loader and
IT62G Series II Integrated Toolcarrier Power Train
MID 081 - CID 0585 - FMI 02
950G Series II Wheel Loader, 962G Series II
Wheel Loader and
IT62G Series II Integrated Toolcarrier Power Train
MID 081 - CID 0672 - FMI 02
950G Series II Wheel Loader, 962G Series II
Wheel Loader and
IT62G Series II Integrated Toolcarrier Power Train
MID 081 - CID 0673 - FMI 02
950G Series II Wheel Loader, 962G Series II
Wheel Loader and
IT62G Series II Integrated Toolcarrier Power Train
MID 081 - CID 1327 - FMI 00
950G Series II Wheel Loader, 962G Series II
Wheel Loader and
IT62G Series II Integrated Toolcarrier Power Train
MID 081 - CID 1327 - FMI 01
950G Series II Wheel Loader, 962G Series II
Wheel Loader and
IT62G Series II Integrated Toolcarrier Power Train
MID 030 - CID 1791 - FMI 08
Caterpillar Monitoring System
MID 082 - CID 0352 - FMI 00
950G Series II Wheel Loader and 962G Series II Wheel Loader Electrohydraulic System
MID 082 - CID 0352 - FMI 01
950G Series II Wheel Loader and 962G Series II Wheel Loader Electrohydraulic System
MID 082 - CID 0352 - FMI 03
950G Series II Wheel Loader and 962G Series II Wheel Loader Electrohydraulic System
MID 082 - CID 0352 - FMI 04
950G Series II Wheel Loader and 962G Series II Wheel Loader Electrohydraulic System
MID 082 - CID 0352 - FMI 08
950G Series II Wheel Loader and 962G Series II Wheel Loader Electrohydraulic System
MID 082 - CID 0352 - FMI 13
950G Series II Wheel Loader and 962G Series II Wheel Loader Electrohydraulic System
MID 082 - CID 0353 - FMI 00
950G Series II Wheel Loader and 962G Series II Wheel Loader Electrohydraulic System
MID 082 - CID 0353 - FMI 01
950G Series II Wheel Loader and 962G Series II Wheel Loader Electrohydraulic System
MID 082 - CID 0353 - FMI 03
950G Series II Wheel Loader and 962G Series II Wheel Loader Electrohydraulic System
MID 082 - CID 0353 - FMI 04
950G Series II Wheel Loader and 962G Series II Wheel Loader Electrohydraulic System
MID 082 - CID 0353 - FMI 08
950G Series II Wheel Loader and 962G Series II Wheel Loader Electrohydraulic System
MID 082 - CID 0353 - FMI 13
950G Series II Wheel Loader and 962G Series II Wheel Loader Electrohydraulic System
MID 082 - CID 0487 - FMI 00
950G Series II Wheel Loader and 962G Series II Wheel Loader Electrohydraulic System
MID 082 - CID 0487 - FMI 01
950G Series II Wheel Loader and 962G Series II Wheel Loader Electrohydraulic System
MID 082 - CID 0487 - FMI 03
950G Series II Wheel Loader and 962G Series II Wheel Loader Electrohydraulic System
MID 082 - CID 0487 - FMI 04
950G Series II Wheel Loader and 962G Series II Wheel Loader Electrohydraulic System
MID 082 - CID 0487 - FMI 08
950G Series II Wheel Loader and 962G Series II Wheel Loader Electrohydraulic System
MID 082 - CID 0487 - FMI 13
950G Series II Wheel Loader and 962G Series II Wheel Loader Electrohydraulic System
CID 0262 FMI 03 5 Volt Sensor DC Power Supply short to +batt
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
CID 1589 FMI 04 Turbo Inlet Air Pressure Sensor short to ground
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
MID 074 - CID 0364 - FMI 03
Medium Wheel Loaders (MWL) Payload Control System (PCS) 3.0
MID 074 - CID 0364 - FMI 04
Medium Wheel Loaders (MWL) Payload Control System (PCS) 3.0
MID 074 - CID 0364 - FMI 08
Medium Wheel Loaders (MWL) Payload Control System (PCS) 3.0
MID 074 - CID 0769 - FMI 03
Medium Wheel Loaders (MWL) Payload Control System (PCS) 3.0
MID 074 - CID 0769 - FMI 04
Medium Wheel Loaders (MWL) Payload Control System (PCS) 3.0
MID 074 - CID 0769 - FMI 08
Medium Wheel Loaders (MWL) Payload Control System (PCS) 3.0
MID 074 - CID 1964 - FMI 08
Medium Wheel Loaders (MWL) Payload Control System (PCS) 3.0
MID 074 - CID 1964 - FMI 03
Medium Wheel Loaders (MWL) Payload Control System (PCS) 3.0
MID 074 - CID 1964 - FMI 04
Medium Wheel Loaders (MWL) Payload Control System (PCS) 3.0
MID 074 - CID 0350 - FMI 01
Payload Control System (PCS) 2.X
MID 074 - CID 0350 - FMI 02
Payload Control System (PCS) 2.X
MID 074 - CID 0350 - FMI 13
Payload Control System (PCS) 2.X
MID 074 - CID 0364 - FMI 01
Payload Control System (PCS) 2.X
MID 074 - CID 0364 - FMI 02
Payload Control System (PCS) 2.X
MID 074 - CID 0364 - FMI 08
Payload Control System (PCS) 2.X
MID 074 - CID 0769 - FMI 01
Payload Control System (PCS) 2.X
MID 074 - CID 0769 - FMI 02
Payload Control System (PCS) 2.X
MID 074 - CID 0769 - FMI 08
Payload Control System (PCS) 2.X
MID 074 - CID 1964 - FMI 13
Medium Wheel Loaders (MWL) Payload Control System (PCS) 3.0
MID 074 - CID 1964 - FMI 02
Medium Wheel Loaders (MWL) Payload Control System (PCS) 3.0
MID 074 - CID 0364 - FMI 02
Medium Wheel Loaders (MWL) Payload Control System (PCS) 3.0
MID 074 - CID 0769 - FMI 02
Medium Wheel Loaders (MWL) Payload Control System (PCS) 3.0
MID 030 - CID 0427 - FMI 03
Caterpillar Monitoring System
MID 030 - CID 0428 - FMI 03
Caterpillar Monitoring System
MID 030 - CID 0428 - FMI 04
Caterpillar Monitoring System
MID 030 - CID 0427 - FMI 04
Caterpillar Monitoring System
Disassembly and Assembly
Lift Kickout Control - Remove and Install
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Machine Systems
Service Magazine
New Rotary Position Sensors Are Used {1400}
2002/07/01
Explanation of Transmission Oil Temperature Sensors {5574}
2003/03/10
New Hydraulic Oil Temperature Sensor Is Now Used {509T}
2003/08/11
A New Speed Sensor is Available {1907}
2004/03/08
Correction to Troubleshooting Manual, &quot;Sensor Signal Voltage&quot; {5574}
2004/09/20
Troubleshooting Column-Type Fuel Level Senders {5574, 7481}
2007/03/19
New Engine Software Is Now Available {1901, 1920, 1929, 7620}
2006/05/22
A New Pressure Sensor Is Available for the Payload Control System {1439, 7494}
2007/06/04
An Improved Tilt Sensor Linkage and Guard Is Available for Medium Wheel Loaders {5736}
2009/08/17
Procedure Now Available to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
2013/02/28
Improved Rotary Position Sensor Is Now Used on Certain Cat<SUP>&reg;</SUP> Products {1439, 1913, 4806, 4809, 5736, 5737}
2012/07/11
Troubleshooting
CID 0291 FMI 05 Engine Cooling Fan Solenoid open circuit
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
CID 0291 FMI 06 Engine Cooling Fan Solenoid short to ground
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
Engine Fan Control Solenoid Circuit - Test
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
Engine Fan Reversing Solenoid Circuit - Test
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
CID 0485 FMI 03 Engine Fan Rev Solenoid short to +batt
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
CID 0485 FMI 04 Engine Fan Rev Solenoid short to ground
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
Disassembly and Assembly
Air Inlet Heater Solenoid - Remove and Install
3126B Engines for Caterpillar Built Machines
Special Instruction
Procedure to Improve Cold Starting Capability for 950G Series II Wheel Loader, 962G Series II Wheel Loader, and IT62G Series II Integrated Toolcarrier{1000, 1456, 7000}
Procedure to Improve Cold Starting Capability for 950G Series II Wheel Loader, 962G Series II Wheel Loader, and IT62G Series II Integrated Toolcarrier{1000, 1456, 7000}
Technical Information Bulletin
Procedure for Starting an Engine in Cold Weather{1000, 1090, 1250, 1348, 1450, 1453, 1456, 1900}
Procedure for Starting an Engine in Cold Weather{1000, 1090, 1250, 1348, 1450, 1453, 1456, 1900}
Service Magazine
An Update for Cold Weather Starting Aid on Caterpillar Wheel Loaders is Available {1456, 1902, 7620}
2007/04/09
A New Ether Cylinder O-ring is Now Used on All Caterpillar Products {1456}
2013/09/24
Engine News
Caterpillar Remanufactured Electric Starting Motors Are Improved {1453}
2011/05/16
Special Instruction
Caterpillar PRELUB<SUP>&reg;</SUP> Diagnostics{1469}
Caterpillar PRELUB® Diagnostics{1469}
Starting Motor Solenoid - Replace {1467}
Starting Motor Solenoid - Replace {1467}
Installation of New Shift Lever Assembly for All Starter Motors {1453}
Installation of New Shift Lever Assembly for All Starter Motors {1453}
Procedure to Install the Insulator on to Series Starters on All Engines {1453}
Procedure to Install the Insulator on to Series Starters on All Engines {1453}
Installation of Repair Kit-Solenoid Plunger Assembly on All Engines {1453}
Installation of Repair Kit-Solenoid Plunger Assembly on All Engines {1453}
Procedure to Install Terminal Kit on All Engines {1453}
Procedure to Install Terminal Kit on All Engines {1453}
Procedure to Install Brush Holder Assembly in All Engines {1453}
Procedure to Install Brush Holder Assembly in All Engines {1453}
Procedure to Replace Armature of Starter Motor On All Cat<SUP>&reg;</SUP> Products {1408, 1450, 1453}
Procedure to Replace Armature of Starter Motor On All Cat® Products {1408, 1450, 1453}
Procedure to Replace Commutator End (CE) Housing of Starter Motor On All Cat<SUP>&reg;</SUP> Products {1408, 1450, 1453}
Procedure to Replace Commutator End (CE) Housing of Starter Motor On All Cat® Products {1408, 1450, 1453}
Procedure to Replace Drive Assembly of Starter Motor On All Cat<SUP>&reg;</SUP> Products {1453}
Procedure to Replace Drive Assembly of Starter Motor On All Cat® Products {1453}
Technical Information Bulletin
Procedure for Starting an Engine in Cold Weather{1000, 1090, 1250, 1348, 1450, 1453, 1456, 1900}
Procedure for Starting an Engine in Cold Weather{1000, 1090, 1250, 1348, 1450, 1453, 1456, 1900}
Specifications
Electric Starting Motor
3126B Engine for Caterpillar Built Machines
Testing and Adjusting
Pinion Clearance - Adjust
3126B Engines
Electric Starting System - Test
3126B Engines
Disassembly and Assembly
Electric Starting Motor - Remove and Install
3126B Engines for Caterpillar Built Machines
Electric Starting Motor - Remove - Engine in Chassis
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Engine Supplement
Electric Starting Motor - Install - Engine in Chassis
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Engine Supplement
Service Magazine
Examine Failed Starting Motors to Understand the Reason for Failure {1453}
2002/10/28
Operation and Maintenance Manual
Battery Disconnect Switch
IT62G Series II Integrated Toolcarrier and 950G Series II and 962G Series II Wheel Loaders
Special Instruction
Procedure for Adjusting the Brake Light Switch on the Service Brake Foot Pedals With Two Stop Lamps in the Circuit{4269}
Procedure for Adjusting the Brake Light Switch on the Service Brake Foot Pedals With Two Stop Lamps in the Circuit{4269}
Procedure to Install the Horn Button{7332, 7402}
Procedure to Install the Horn Button{7332, 7402}
Installation Procedure for the 423-5844 Conversion Kit {5057, 5147, 5734, 6129, 7332}
Installation Procedure for the 423-5844 Conversion Kit {5057, 5147, 5734, 6129, 7332}
Repair/Replacement Procedure for <NOBR> 5C-6108</NOBR> Refueling Switch {1295}
Repair/Replacement Procedure for 5C-6108 Refueling Switch {1295}
Specifications
Pressure Switch (Service Brake Oil)
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Braking System
Pressure Switch (Primary Steering Oil and Secondary Steering Oil)
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Steering System
Pressure Switch (Parking Brake Oil)
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Braking System
Toggle Switch (Hood Tilt)
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Machine Systems
Limit Switch (Stop Light)
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Braking System
Temperature Switch (Front and Rear Axle Oil)
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Power Train
Steering Wheel
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Steering System
Toggle Switch (Ground Level Shutdown)
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Machine Systems
Liquid Level Switch (Hydraulic Tank)
950G Series II Wheel Loader, 962G Series II
Wheel Loader and IT62G Series II Integrated Toolcarrier Hydraulic System
Temperature Switch (Axle Oil)
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Power Train
Bypass Switch (Power Train Oil Filter)
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Power Train
Toggle Switch (Power Guard Actuator)
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Machine Systems
Systems Operation
Switches
Caterpillar Monitoring System
Rocker Switch (Transmission Neutralizer Override Control)
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Braking System
Start Relay
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Power Train
Switches
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Power Train
Switches
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Hydraulic System
Pressure Switch (Refrigerant)
Air Conditioning and Heating R134a for All Caterpillar Machines
Testing and Adjusting
Limit Switch (Stop Light) - Adjust
950G Series II Wheel Loader, 962G Series II
Wheel Loader and IT62G Series II
Integrated Toolcarrier Braking System
Troubleshooting
MID 081 - CID 0367 - FMI 03
950G Series II Wheel Loader, 962G Series II
Wheel Loader and
IT62G Series II Integrated Toolcarrier Power Train
Switch Circuits
Caterpillar Monitoring System
CID 0267 FMI 02 Incorrect Engine Shutdown Switch inputs
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
MID 082 - CID 0365 - FMI 04
950G Series II Wheel Loader and 962G Series II Wheel Loader Electrohydraulic System
MID 082 - CID 0489 - FMI 04
950G Series II Wheel Loader and 962G Series II Wheel Loader Electrohydraulic System
MID 082 - CID 0490 - FMI 04
950G Series II Wheel Loader and 962G Series II Wheel Loader Electrohydraulic System
MID 082 - CID 0490 - FMI 03
950G Series II Wheel Loader and 962G Series II Wheel Loader Electrohydraulic System
MID 082 - CID 0489 - FMI 03
950G Series II Wheel Loader and 962G Series II Wheel Loader Electrohydraulic System
MID 082 - CID 0965 - FMI 02
950G Series II Wheel Loader and 962G Series II Wheel Loader Electrohydraulic System
MID 082 - CID 0965 - FMI 03
950G Series II Wheel Loader and 962G Series II Wheel Loader Electrohydraulic System
MID 082 - CID 1324 - FMI 02
950G Series II Wheel Loader and 962G Series II Wheel Loader Electrohydraulic System
MID 082 - CID 1325 - FMI 03
950G Series II Wheel Loader and 962G Series II Wheel Loader Electrohydraulic System
MID 082 - CID 1325 - FMI 04
950G Series II Wheel Loader and 962G Series II Wheel Loader Electrohydraulic System
MID 082 - CID 1592 - FMI 03
950G Series II Wheel Loader and 962G Series II Wheel Loader Electrohydraulic System
MID 082 - CID 1592 - FMI 04
950G Series II Wheel Loader and 962G Series II Wheel Loader Electrohydraulic System
MID 082 - CID 1718 - FMI 03
950G Series II Wheel Loader and 962G Series II Wheel Loader Electrohydraulic System
MID 082 - CID 1718 - FMI 04
950G Series II Wheel Loader and 962G Series II Wheel Loader Electrohydraulic System
MID 081 - CID 0444 - FMI 03
950G Series II Wheel Loader, 962G Series II
Wheel Loader and
IT62G Series II Integrated Toolcarrier Power Train
MID 081 - CID 0444 - FMI 05
950G Series II Wheel Loader, 962G Series II
Wheel Loader and
IT62G Series II Integrated Toolcarrier Power Train
MID 081 - CID 0623 - FMI 03
950G Series II Wheel Loader, 962G Series II
Wheel Loader and
IT62G Series II Integrated Toolcarrier Power Train
MID 081 - CID 0623 - FMI 04
950G Series II Wheel Loader, 962G Series II
Wheel Loader and
IT62G Series II Integrated Toolcarrier Power Train
MID 081 - CID 0444 - FMI 06
950G Series II Wheel Loader, 962G Series II
Wheel Loader and
IT62G Series II Integrated Toolcarrier Power Train
MID 081 - CID 1521 - FMI 03
950G Series II Wheel Loader, 962G Series II
Wheel Loader and
IT62G Series II Integrated Toolcarrier Power Train
MID 081 - CID 1521 - FMI 04
950G Series II Wheel Loader, 962G Series II
Wheel Loader and
IT62G Series II Integrated Toolcarrier Power Train
MID 081 - CID 0368 - FMI 03
950G Series II Wheel Loader, 962G Series II
Wheel Loader and
IT62G Series II Integrated Toolcarrier Power Train
MID 081 - CID 0368 - FMI 04
950G Series II Wheel Loader, 962G Series II
Wheel Loader and
IT62G Series II Integrated Toolcarrier Power Train
MID 081 - CID 0621 - FMI 03
950G Series II Wheel Loader, 962G Series II
Wheel Loader and
IT62G Series II Integrated Toolcarrier Power Train
MID 081 - CID 0621 - FMI 04
950G Series II Wheel Loader, 962G Series II
Wheel Loader and
IT62G Series II Integrated Toolcarrier Power Train
MID 081 - CID 0622 - FMI 03
950G Series II Wheel Loader, 962G Series II
Wheel Loader and
IT62G Series II Integrated Toolcarrier Power Train
MID 081 - CID 0622 - FMI 04
950G Series II Wheel Loader, 962G Series II
Wheel Loader and
IT62G Series II Integrated Toolcarrier Power Train
MID 081 - CID 0793 - FMI 03
950G Series II Wheel Loader, 962G Series II
Wheel Loader and
IT62G Series II Integrated Toolcarrier Power Train
MID 081 - CID 0793 - FMI 04
950G Series II Wheel Loader, 962G Series II
Wheel Loader and
IT62G Series II Integrated Toolcarrier Power Train
MID 081 - CID 0794 - FMI 03
950G Series II Wheel Loader, 962G Series II
Wheel Loader and
IT62G Series II Integrated Toolcarrier Power Train
MID 081 - CID 0794 - FMI 04
950G Series II Wheel Loader, 962G Series II
Wheel Loader and
IT62G Series II Integrated Toolcarrier Power Train
MID 081 - CID 0794 - FMI 07
950G Series II Wheel Loader, 962G Series II
Wheel Loader and
IT62G Series II Integrated Toolcarrier Power Train
Engine Shutdown Switch Circuit - Test
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
MID 082 - CID 1325 - FMI 03
950G Series II Wheel Loader and 962G Series II Wheel Loader Electrohydraulic System
MID 082 - CID 1325 - FMI 04
950G Series II Wheel Loader and 962G Series II Wheel Loader Electrohydraulic System
MID 081 - CID 0070 - FMI 04
950G Series II Wheel Loader, 962G Series II
Wheel Loader and
IT62G Series II Integrated Toolcarrier Power Train
MID 081 - CID 0070 - FMI 03
950G Series II Wheel Loader, 962G Series II
Wheel Loader and
IT62G Series II Integrated Toolcarrier Power Train
Service Magazine
A New Locking Switch is Used for Fine Modulation {5741, 7332}
2003/02/24
A New Oil Pressure Switch is Now Available {7421}
2005/05/09
Improved Mounting Bracket Is Now Being Used for the Fuel Priming Pump Switch {1258, 7332}
2005/02/14
The Improved Toggle Switch For The Hood Tilt System Is Now Used {7251, 7332}
2005/11/28
New Cab Temperature Control Potentiometer Is Now Available {5721}
2007/09/17
An Improved Pressure Switch For The Secondary Steering Attachment is Now Available {1435}
2008/04/14
An Improved Pressure Switch is Now Available {1435}
2008/09/08
A Improved Procedure to Adjust the Stop Light Limit Switch {1432, 1435, 4269}
2008/11/03
Update to the Testing and Adjusting , "Limit Switch (Stop Light) - Adjust" {1432, 1435, 4269}
2009/03/02
Improved Procedure for Verifying the Operation of the Battery Disconnect System. {1411}
2009/05/04
New Pressure Switch Is Now Used For Air Conditioner Refrigerant On Certain Cat Products {1435, 1809}
2011/06/06
An Improved 5P-8500 Key Is Now Available {1416, 1416, 7000, 7000}
2011/12/01
Truck Engine News
Coolant/Battery Tester Group Quickly Tests Coolant and Battery Acid {0773, 0785}
2004/12/27
Do Not Use the 261-3363 Wireless Communication Adapter with Model Year 2007 Cat Engines and Transmissions in On-Highway Trucks {0785, 1930, 7620}
2007/10/01
Engine News
The 237-5130 Digital Multimeter Gp Features a Built-in Infrared Thermometer {0785}
2004/04/19
Coolant/Battery Tester Group Quickly Tests Coolant and Battery Acid {0773, 0785}
2004/12/27
260-5800 Electrical Test Group Packages Digital Multimeter, Clamp-on Ammeter, Current Detector, and Test Leads in Convenient Carrying Case {0785}
2005/03/07
270-5051 Repair Kit (Electrical Connectors) Available for Repairs to Wiring Harnesses with Ampseal 16 and A4E 2 Connectors {0709, 1408}
2006/03/20
Enhanced Voltmeter Leads Are Now Available {0785}
2006/02/01
Test Cable Group Checks Three-Wire, Active Analog Circuits That Are Used in Sensors {0779, 0785}
2006/10/16
277-4734 Bypass Harness Assembly Allows Cat Electronic Technician (Cat ET) to Communicate with ADEM IV:E2 Electronic Control Modules {0779, 0785, 1901, 1930}
2006/09/04
Operation and Maintenance Manual
Off-Board Service Software
Medium Wheel Loaders (MWL) Payload Control System (MWL)
Special Instruction
An Aid To Reading Multimeter Scales{0785}
An Aid To Reading Multimeter Scales{0785}
Tool Operating Manual
348-5430 Multi-Tool Gp 2 {0709, 0769, 0785}
348-5430 Multi-Tool Gp 2 {0709, 0769, 0785}
NEHS1032: 538-5051 Communications Adapter 3 {0599, 0709, 1900, 4800, 7490, 7600}
NEHS1032: 538-5051 Communications Adapter 3 {0599, 0709, 1900, 4800, 7490, 7600}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the Communications Adapter 3{1900}
Using the Communications Adapter 3{1900}
Using the 8T-2700 Blowby/Air Flow Indicator{0781, 0785, 1317}
Using the 8T-2700 Blowby/Air Flow Indicator{0781, 0785, 1317}
146-4080 Digital Multimeter Specification, Testing, and Maintenance Manual{0374, 0599, 0709}
146-4080 Digital Multimeter Specification, Testing, and Maintenance Manual{0374, 0599, 0709}
Communication Adapter II{0600, 0709, 7600, 7610}
Communication Adapter II{0600, 0709, 7600, 7610}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
131-5051 Dataview Group and Dataview Portable Tech Station Group{0374, 0599, 0701, 0709}
131-5051 Dataview Group and Dataview Portable Tech Station Group{0374, 0599, 0701, 0709}
Using the 4C-8195 Control Service Tool{0374, 0599, 0709, 7490}
Using the 4C-8195 Control Service Tool{0374, 0599, 0709, 7490}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
NEHS1270 TesLite and LoadProCables {0374, 0599, 0709, 0734}
NEHS1270 TesLite and LoadProCables {0374, 0599, 0709, 0734}
M0090131 Battery Analyzer 480-4181 (484-4859 Group) {0374, 0599, 0709, 1401, 7468}
M0090131 Battery Analyzer 480-4181 (484-4859 Group) {0374, 0599, 0709, 1401, 7468}
Systems Operation
Payload Control System/PC Off-Board System
Payload Control System (PCS) 2.X
VIMSpc Software
Medium Wheel Loaders (MWL) Payload Control System (PCS) 3.0
Testing and Adjusting
Service Tools
Work Area Visual System
Troubleshooting
Factory Passwords Worksheet
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
Service Tools
Alternator - Delco 21SI
Electronic Service Tool Will Not Communicate with ECM
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
Service Tools
Machine Security System
Using Caterpillar Electronic Technician to Determine Diagnostic Codes
Machine Security System
Service Tools
Payload Control System (PCS) 2.X
Service Tools
950G Series II Wheel Loader, 962G Series II
Wheel Loader and
IT62G Series II Integrated Toolcarrier Power Train
Using Caterpillar Electronic Technician to Determine Diagnostic Codes
950G Series II Wheel Loader and 962G Series II Wheel Loader Electrohydraulic System
Service Tools
Caterpillar Monitoring System
Service Tools
Alternator - Delco 27SI
Electronic Service Tools
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
Factory Passwords
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
Using Caterpillar Electronic Technician to Determine Diagnostic Codes
Medium Wheel Loaders (MWL) Payload Control System (PCS) 3.0
Service Tools
MSS3s Machine Security System
Service Magazine
Diagnostic Cables and Harnesses Are Available {0785}
2014/08/11
Caterpillar Electronic Technician (Cat ET) 2001B-Service Pack 1 Software Upgrade is Now Available {0785}
2002/02/11
New Service Information Tool for CAT Dealers is Now Available {1900}
2002/06/17
2002A Service Pack 1 for Caterpillar Electronic Technician (Cat ET) is Now Available {0785}
2002/08/19
New Test ECM Available for Machines {0785, 7610}
2004/05/10
Coolant/Battery Tester Group Quickly Tests Coolant and Battery Acid {0773, 0785}
2004/12/27
260-5800 Electrical Test Group Packages Digital Multimeter, Clamp-on Ammeter, Current Detector, and Test Leads in Convenient Carrying Case {0785}
2005/03/07
The 285-0910 Multi-Tool Gp Incorporates Four Diagnostic Tools into a Single, Hand Held Unit {0774, 0779, 0781, 0782}
2006/12/04
New 271-8590 Analyzer Gp (24-Volt) Quickly Identifies Starting and Charging System Problems {0709, 1406}
2006/10/01
277-2362 Transmission Analyzer III Group Offers Upgraded Diagnostic Capabilities {0769, 0779, 0783}
2007/10/22
Updated Instruction For The Bypass Harness {0785, 1408}
2008/03/17
New Firmware Is Now Available for Communications Adapter 3 {7610, 7620}
2011/10/20
New Software For Cat<SUP>&reg;</SUP> ET Can Now Be Used For All Caterpillar Products {0785, 7606}
2013/08/15
A New Communication Adapter Cable As Is Now Available For Certain Cat Products {0785}
A New Communication Adapter Cable As Is Now Available For Certain Cat Products {0785}
Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}
Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}
Military Electronic Technician (Military ET) Is Now Available For Military Personnel {0374, 0376, 0599, 1000, 7000, 7610, 7620}
Military Electronic Technician (Military ET) Is Now Available For Military Personnel {0374, 0376, 0599, 1000, 7000, 7610, 7620}
Improved Coil Now Available {1554, 3139, 5479}
2005/11/07
A New Coil Assembly is Now Used {5479}
2009/02/09
Operation and Maintenance Manual
Backup Alarm - If Equipped
IT62G Series II Integrated Toolcarrier and 950G Series II and 962G Series II Wheel Loaders
Backup Alarm - Test
IT62G Series II Integrated Toolcarrier and 950G Series II and 962G Series II Wheel Loaders
Special Instruction
Installation of 244-1090 Alarm Gp {7400, 7402, 7407}
Installation of 244-1090 Alarm Gp {7400, 7402, 7407}
Troubleshooting
Backup Alarm Always Off
950G Series II Wheel Loader, 962G Series II
Wheel Loader and
IT62G Series II Integrated Toolcarrier Power Train
Backup Alarm Always On
950G Series II Wheel Loader, 962G Series II
Wheel Loader and
IT62G Series II Integrated Toolcarrier Power Train
Operation and Maintenance Manual
Battery or Battery Cable - Inspect/Replace
IT62G Series II Integrated Toolcarrier and 950G Series II and 962G Series II Wheel Loaders
Service Letter-NACD
PRODUCT SUPPORT PROGRAM FOR REPAIRING MAIN CAB HARNESS ON CERTAIN 950G II, 962G II, 966G II, 972G II AND 980G II MEDIUM WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR REPAIRING MAIN CAB HARNESS ON CERTAIN 950G II, 962G II, 966G II, 972G II AND 980G II MEDIUM WHEEL LOADERS
Service Letter-CSARL
Service Letter-Americas
Technical Information Bulletin
Main Cab Harness Failure on Medium Wheel Loaders
Main Cab Harness Failure on Medium Wheel Loaders
Steering Column Harness Assembly Kinking on G/GII Medium Wheel Loaders
Steering Column Harness Assembly Kinking on G/GII Medium Wheel Loaders
Specifications
Pressure Switch (Service Brake Oil)
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Braking System
Pressure Switch (Primary Steering Oil and Secondary Steering Oil)
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Steering System
Pressure Switch (Parking Brake Oil)
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Braking System
Toggle Switch (Hood Tilt)
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Machine Systems
Temperature Switch (Front and Rear Axle Oil)
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Power Train
Systems Operation
Senders
Caterpillar Monitoring System
Switches
Caterpillar Monitoring System
Sensors
Caterpillar Monitoring System
Action Lamp
Caterpillar Monitoring System
Action Alarm
Caterpillar Monitoring System
Testing and Adjusting
Speed Sensor - Adjust
950G Series II Wheel Loader, 962G Series II
Wheel Loader and
IT62G Series II Integrated Toolcarrier Power Train
Electrical Connector - Inspect
950G Series II Wheel Loader and 962G Series II Wheel Loader Electrohydraulic System
Electrical Connector - Inspect
Caterpillar Monitoring System
Electric Starting System - Test
3126B Engines
Troubleshooting
CID 0291 FMI 05 Engine Cooling Fan Solenoid open circuit
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
CID 0291 FMI 06 Engine Cooling Fan Solenoid short to ground
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
Electrical Connectors - Inspect
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
CID 0100 FMI 03 Engine Oil Pressure open/short to +batt
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
CID 0100 FMI 04 Engine Oil Pressure short to ground
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
CID 0172 FMI 03 Intake Manifold Air Temp open/short to +batt
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders

Truck sale:

Caterpillar 950G II
 
Caterpillar 950G II
- Wheel Loaders
FINANZAUTO S.A.
Caterpillar 950G II, Wheel Loaders, Construction
79,420 
Caterpillar 950G II, Wheel Loaders, Construction
- Wheel Loaders
FINNING CANADA
 
 
Caterpillar 950GII
- Wheel Loaders
WESTERN STATES EQUIPMENT
Caterpillar 950G II
 
Caterpillar 950G II
- Wheel Loaders
GREGORY POOLE EQUIPMENT CO.
Caterpillar 950GII
 
Caterpillar 950GII
- Wheel Loaders
WAGNER EQUIPMENT CO
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.