AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

D11R CUSTOM PARTS MANUAL TRACK-TYPE TRACTOR 7PZ00001-UP (MACHINE) HYDRAULIC SYSTEM Caterpillar SIS



TRACK-TYPE TRACTOR D11R TRACK-TYPE TRACTOR 7PZ
 D11R CUSTOM PARTS MANUAL TRACK-TYPE TRACTOR 7PZ00001-UP (MACHINE) SEBC1359 D11R 7PZ   (1999)

Parts group D11R:

  For full view, you need register
HYDRAULIC SYSTEM
CYLINDER GP
CYLINDER GP-RIPPER
101-8581 CYLINDER GP-RIPPER
101-8581 CYLINDER GP-RIPPER -LIFT, RH
S/N GAZ1-UP
254-MM (10-IN) BORE X 613-MM (24.1-IN) STROKE
PART OF 4Z-0664 RIPPER AR
CYLINDER GP-RIPPER
101-8614 CYLINDER GP-RIPPER
101-8614 CYLINDER GP-RIPPER -LIFT, LH
S/N GAZ1-UP
254-MM (10-IN) BORE X 613-MM (24.1-IN) STROKE
PART OF 4Z-0664 RIPPER AR
CYLINDER GP-RIPPER
130-3263 CYLINDER GP-RIPPER
130-3263 CYLINDER GP-RIPPER -TILT, RH
S/N GAZ1-UP
196.85-MM (7.75-IN.) BORE X 830-MM (32.7-IN.) STROKE
PART OF 4Z-0664 RIPPER AR
CYLINDER GP-RIPPER
130-6381 CYLINDER GP-RIPPER
130-6381 CYLINDER GP-RIPPER -TILT, LH
S/N GAZ1-UP
196.85-MM (7.75-IN.) BORE X 830-MM (32.7-IN.) STROKE
PART OF 4Z-0664 RIPPER AR
CYLINDER GP-RIPPER
340-1877 CYLINDER GP-RIPPER
340-1877 CYLINDER GP-RIPPER
S/N GAZ1-UP
254-MM (10-IN) BORE X 613-MM (24.1-IN) STROKE
PART OF 4Z-0664 RIPPER AR
PISTON GP-HYDRAULIC CYLINDER
102-0693 PISTON GP-HYDRAULIC CYLINDER
102-0693 PISTON GP-HYDRAULIC CYLINDER -RIPPER
S/N GAZ1-UP
PART OF 101-8581, 101-8614, 340-1877 CYLINDER GP-RIPPER
LINES GP-HYDRAULIC
LINES GP-HYDRAULIC
194-7108 LINES GP-HYDRAULIC
194-7108 LINES GP-HYDRAULIC -AUTO CARRY
S/N AAF1-201; 7PZ1-663
PART OF 209-9081 CONTROL AR-HYDRAULIC
LINES GP-HYDRAULIC
194-7108 LINES GP-HYDRAULIC
194-7108 LINES GP-HYDRAULIC -AUTO CARRY
S/N AAF202-UP; 7PZ664-UP
PART OF 209-9081 CONTROL AR-HYDRAULIC
LINES GP-RIPPER
LINES GP-RIPPER
141-8376 LINES GP-RIPPER
141-8376 LINES GP-RIPPER
S/N GAZ1-UP
PART OF 4Z-0664 RIPPER AR
LINES GP-RIPPER
369-9248 LINES GP-RIPPER
369-9248 LINES GP-RIPPER
S/N GAZ1-UP
PART OF 4Z-0664 RIPPER AR
SCREEN GP
SCREEN GP-HYDRAULIC
263-3300 SCREEN GP-HYDRAULIC
263-3300 SCREEN GP-HYDRAULIC
S/N AAF1-UP; 7PZ1-UP
CANNOT BE USED WITH AUTO CARRY
SCREEN GP-HYDRAULIC
263-3308 SCREEN GP-HYDRAULIC
263-3308 SCREEN GP-HYDRAULIC
S/N AAF1-UP; 7PZ1-UP
PART OF 263-3300, 263-8470, 266-0290 SCREEN GP-HYDRAULIC
SCREEN GP-HYDRAULIC
263-8470 SCREEN GP-HYDRAULIC
263-8470 SCREEN GP-HYDRAULIC -AUTO CARRY
S/N AAF1-UP; 7PZ1-UP
SCREEN GP-HYDRAULIC
266-0285 SCREEN GP-HYDRAULIC
266-0285 SCREEN GP-HYDRAULIC -OIL PUMP
S/N AAF1-UP; 7PZ1-UP
PART OF 263-3300, 263-8470, 266-0290 SCREEN GP-HYDRAULIC
SCREEN GP-HYDRAULIC
266-0290 SCREEN GP-HYDRAULIC
266-0290 SCREEN GP-HYDRAULIC -RETROFIT KIT
S/N AAF1-UP; 7PZ1-UP
VALVE GP-DIVERTER
VALVE GP-DIVERTER
164-4536 VALVE GP-DIVERTER
164-4536 VALVE GP-DIVERTER -AUTO CARRY HYDRAULIC LINES
S/N AAF1-UP; 7PZ1-UP
PART OF 194-7108 LINES GP-HYDRAULIC
VALVE GP-SOLENOID
VALVE GP-SOLENOID
152-8340 VALVE GP-SOLENOID
152-8340 VALVE GP-SOLENOID
S/N AAF1-UP; 7PZ1-UP
24-VOLT
PART OF 164-4536 VALVE GP-DIVERTER

Information:

(For parts list, see above)

Special Instruction
Accumulator Discharging and Charging Procedures {0738, 4263, 4264, 4331, 5077, 5077, 5081, 7474}
Accumulator Discharging and Charging Procedures {0738, 4263, 4264, 4331, 5077, 5077, 5081, 7474}
Decommissioning Procedure for Permanently Sealed Diaphragm Accumulators {5077}
Decommissioning Procedure for Permanently Sealed Diaphragm Accumulators {5077}
Technical Information Bulletin
Updated Ride Control Accumulator Test and Charge Instructions{0738, 5004, 5077, 5081, 7474}
Updated Ride Control Accumulator Test and Charge Instructions{0738, 5004, 5077, 5081, 7474}
Specifications
Accumulator
D11R Track-Type Tractor Hydraulic System
Tool Operating Manual
NEHS1214: 455-0126 Nitrogen Booster Pump Group {0374, 0599, 0647, 0756, 4263, 4331, 5077, 7200}
NEHS1214: 455-0126 Nitrogen Booster Pump Group {0374, 0599, 0647, 0756, 4263, 4331, 5077, 7200}
Testing and Adjusting
Accumulator - Test and Charge
D11R Track-Type Tractor Hydraulic System
Service Magazine
The Accumulator Discharging and Charging Procedures are Updated {5077}
The Accumulator Discharging and Charging Procedures are Updated {5077}
Technical Information Bulletin
Updated Ride Control Accumulator Test and Charge Instructions{0738, 5004, 5077, 5081, 7474}
Updated Ride Control Accumulator Test and Charge Instructions{0738, 5004, 5077, 5081, 7474}
Special Instruction
Converting the Hydraulic Oil Cooler On the D11R to an Air to Oil Cooler{1374, 1375, 1378}
Converting the Hydraulic Oil Cooler On the D11R to an Air to Oil Cooler{1374, 1375, 1378}
Specifications
Cooler Bypass Valve
D11R Track-Type Tractor Hydraulic System
Disassembly and Assembly
Hydraulic Oil Cooler Bypass Valve - Remove and Install
D11R Track-Type Tractor Engine Supplement
Hydraulic Oil Cooler - Remove
D11R Track-Type Tractor Engine Supplement
Hydraulic Oil Cooler - Install
D11R Track-Type Tractor Engine Supplement
Service Magazine
New Hydraulic Oil Coolers with Copper-Nickel Alloy Tubes Resist Corrosion {1374}
2000/08/28
Test Kit Checks Oil Coolers for Leaks {0768, 0781, 0783, 0784}
2004/12/27
D11R and D11T Hydraulic Oil Cooler Kits are Now Available {1374}
2010/10/06
Information Release Memo, HOS04-02, "XT-6 Hose and Couplings to XT-6 ES Components" Is Available {5057}
2004/06/21
Information Release Memo, PELJ0340 , "Reusable Couplings for Caterpillar -12 and -16 XT-6 ES Hose" {5057}
2004/06/28
Operation and Maintenance Manual
Lift Cylinder Yoke Bearings - Lubricate
D11R Track-Type Tractor
Special Instruction
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Service Letter-NACD
PRODUCT SUPPORT PROGRAM FOR REPLACING THE DUAL TILT CYLINDER ASSEMBLY ON CERTAIN D11R AND D11T TRACK-TYPE TRACTORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE DUAL TILT CYLINDER ASSEMBLY ON CERTAIN D11R AND D11T TRACK-TYPE TRACTORS
PRODUCT SUPPORT PROGRAM FOR INSTALLING NEW HYDRAULIC CYLINDER WIPER SEALS ON CERTAIN 988G, 990 II, 992G WHEEL LOADERS D9R, D10R AND D11R TRACK TYPE TRACTORS
PRODUCT SUPPORT PROGRAM FOR INSTALLING NEW HYDRAULIC CYLINDER WIPER SEALS ON CERTAIN 988G, 990 II, 992G WHEEL LOADERS D9R, D10R AND D11R TRACK TYPE TRACTORS
PRODUCT SUPPORT PROGRAM FOR TIGHTENING THE CYLINDER ROD NUT FOR THE TILT CYLINDER AND/OR THE LIFT CYLINDER ON CERTAIN D11R TRACK TYPE TRACTORS
PRODUCT SUPPORT PROGRAM FOR TIGHTENING THE CYLINDER ROD NUT FOR THE TILT CYLINDER AND/OR THE LIFT CYLINDER ON CERTAIN D11R TRACK TYPE TRACTORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE ROD SEAL ON THE LIFT CYLINDER ON CERTAIN D10T AND D11R TRACK TYPE TRACTORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE ROD SEAL ON THE LIFT CYLINDER ON CERTAIN D10T AND D11R TRACK TYPE TRACTORS
Service Letter-Australia
PRODUCT SUPPORT PROGRAM FOR REPLACING THE DUAL TILT CYLINDER ASSEMBLY ON CERTAIN D11R AND D11T TRACK-TYPE TRACTORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE DUAL TILT CYLINDER ASSEMBLY ON CERTAIN D11R AND D11T TRACK-TYPE TRACTORS
PRODUCT SUPPORT PROGRAM FOR INSTALLING NEW HYDRAULIC CYLINDER WIPER SEALS ON CERTAIN 988G, 990 II, 992G WHEEL LOADERS D9R, D10R AND D11R TRACK TYPE TRACTORS
PRODUCT SUPPORT PROGRAM FOR INSTALLING NEW HYDRAULIC CYLINDER WIPER SEALS ON CERTAIN 988G, 990 II, 992G WHEEL LOADERS D9R, D10R AND D11R TRACK TYPE TRACTORS
PRODUCT SUPPORT PROGRAM FOR TIGHTENING THE CYLINDER ROD NUT FOR THE TILT CYLINDER AND/OR THE LIFT CYLINDER ON CERTAIN D11R TRACK TYPE TRACTORS
PRODUCT SUPPORT PROGRAM FOR TIGHTENING THE CYLINDER ROD NUT FOR THE TILT CYLINDER AND/OR THE LIFT CYLINDER ON CERTAIN D11R TRACK TYPE TRACTORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE ROD SEAL ON THE LIFT CYLINDER ON CERTAIN D10T AND D11R TRACK TYPE TRACTORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE ROD SEAL ON THE LIFT CYLINDER ON CERTAIN D10T AND D11R TRACK TYPE TRACTORS
Service Letter-CFEL
PRODUCT SUPPORT PROGRAM FOR REPLACING THE DUAL TILT CYLINDER ASSEMBLY ON CERTAIN D11R AND D11T TRACK-TYPE TRACTORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE DUAL TILT CYLINDER ASSEMBLY ON CERTAIN D11R AND D11T TRACK-TYPE TRACTORS
PRODUCT SUPPORT PROGRAM FOR INSTALLING NEW HYDRAULIC CYLINDER WIPER SEALS ON CERTAIN 988G, 990 II, 992G WHEEL LOADERS D9R, D10R AND D11R TRACK TYPE TRACTORS
PRODUCT SUPPORT PROGRAM FOR INSTALLING NEW HYDRAULIC CYLINDER WIPER SEALS ON CERTAIN 988G, 990 II, 992G WHEEL LOADERS D9R, D10R AND D11R TRACK TYPE TRACTORS
PRODUCT SUPPORT PROGRAM FOR TIGHTENING THE CYLINDER ROD NUT FOR THE TILT CYLINDER AND/OR THE LIFT CYLINDER ON CERTAIN D11R TRACK TYPE TRACTORS
PRODUCT SUPPORT PROGRAM FOR TIGHTENING THE CYLINDER ROD NUT FOR THE TILT CYLINDER AND/OR THE LIFT CYLINDER ON CERTAIN D11R TRACK TYPE TRACTORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE ROD SEAL ON THE LIFT CYLINDER ON CERTAIN D10T AND D11R TRACK TYPE TRACTORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE ROD SEAL ON THE LIFT CYLINDER ON CERTAIN D10T AND D11R TRACK TYPE TRACTORS
Service Letter-CSARL
PRODUCT SUPPORT PROGRAM FOR REPLACING THE DUAL TILT CYLINDER ASSEMBLY ON CERTAIN D11R AND D11T TRACK-TYPE TRACTORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE DUAL TILT CYLINDER ASSEMBLY ON CERTAIN D11R AND D11T TRACK-TYPE TRACTORS
PRODUCT SUPPORT PROGRAM FOR INSTALLING NEW HYDRAULIC CYLINDER WIPER SEALS ON CERTAIN 988G, 990 II, 992G WHEEL LOADERS D9R, D10R AND D11R TRACK TYPE TRACTORS
PRODUCT SUPPORT PROGRAM FOR INSTALLING NEW HYDRAULIC CYLINDER WIPER SEALS ON CERTAIN 988G, 990 II, 992G WHEEL LOADERS D9R, D10R AND D11R TRACK TYPE TRACTORS
PRODUCT SUPPORT PROGRAM FOR TIGHTENING THE CYLINDER ROD NUT FOR THE TILT CYLINDER AND/OR THE LIFT CYLINDER ON CERTAIN D11R TRACK TYPE TRACTORS
PRODUCT SUPPORT PROGRAM FOR TIGHTENING THE CYLINDER ROD NUT FOR THE TILT CYLINDER AND/OR THE LIFT CYLINDER ON CERTAIN D11R TRACK TYPE TRACTORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE ROD SEAL ON THE LIFT CYLINDER ON CERTAIN D10T AND D11R TRACK TYPE TRACTORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE ROD SEAL ON THE LIFT CYLINDER ON CERTAIN D10T AND D11R TRACK TYPE TRACTORS
Service Letter-Americas
PRODUCT SUPPORT PROGRAM FOR REPLACING THE DUAL TILT CYLINDER ASSEMBLY ON CERTAIN D11R AND D11T TRACK-TYPE TRACTORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE DUAL TILT CYLINDER ASSEMBLY ON CERTAIN D11R AND D11T TRACK-TYPE TRACTORS
PRODUCT SUPPORT PROGRAM FOR INSTALLING NEW HYDRAULIC CYLINDER WIPER SEALS ON CERTAIN 988G, 990 II, 992G WHEEL LOADERS D9R, D10R AND D11R TRACK TYPE TRACTORS
PRODUCT SUPPORT PROGRAM FOR INSTALLING NEW HYDRAULIC CYLINDER WIPER SEALS ON CERTAIN 988G, 990 II, 992G WHEEL LOADERS D9R, D10R AND D11R TRACK TYPE TRACTORS
PRODUCT SUPPORT PROGRAM FOR TIGHTENING THE CYLINDER ROD NUT FOR THE TILT CYLINDER AND/OR THE LIFT CYLINDER ON CERTAIN D11R TRACK TYPE TRACTORS
PRODUCT SUPPORT PROGRAM FOR TIGHTENING THE CYLINDER ROD NUT FOR THE TILT CYLINDER AND/OR THE LIFT CYLINDER ON CERTAIN D11R TRACK TYPE TRACTORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE ROD SEAL ON THE LIFT CYLINDER ON CERTAIN D10T AND D11R TRACK TYPE TRACTORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE ROD SEAL ON THE LIFT CYLINDER ON CERTAIN D10T AND D11R TRACK TYPE TRACTORS
Technical Information Bulletin
Lift Cylinder Rod Seal on Some D11R and D10T Tractors Is Leaking
Lift Cylinder Rod Seal on Some D11R and D10T Tractors Is Leaking
The Failure of the Buffer Seal that can be Caused by a Defect in the Seal Groove on All Track-Type Tractors, Wheel Loaders, Hydraulic Excavators and Backhoe Loaders that Use Cylinders that were Manufactured After 1January 2000{7562}
The Failure of the Buffer Seal that can be Caused by a Defect in the Seal Groove on All Track-Type Tractors, Wheel Loaders, Hydraulic Excavators and Backhoe Loaders that Use Cylinders that were Manufactured After 1January 2000{7562}
Surface Finishes of Cylinder Bores{7562}
Surface Finishes of Cylinder Bores{7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Buffer Seal Assembly May Wear and Cause Leaks in the head of the Lift Cylinder on Certain Track-Type Tractors and Wheel Dozers{5102}
Buffer Seal Assembly May Wear and Cause Leaks in the head of the Lift Cylinder on Certain Track-Type Tractors and Wheel Dozers{5102}
Specifications
Bulldozer Lift Cylinder
D11R Track-Type Tractor Hydraulic System
Ripper Lift Cylinder
D11R Track-Type Tractor Hydraulic System
Ripper Tip Cylinder
D11R Track-Type Tractor Hydraulic System
Pin Puller Cylinder
D11R Track-Type Tractor Hydraulic System
Bulldozer Lift Cylinder
D11R Track-Type Tractor Hydraulic System
Bulldozer Dual Tilt Cylinder
D11R Track-Type Tractor Hydraulic System
Bulldozer Tilt Cylinder
D11R Track-Type Tractor Hydraulic System
Bulldozer Lift Cylinder
D11R Track-Type Tractor Hydraulic System
Bulldozer Lift Cylinder
D11R Track-Type Tractor Hydraulic System
Cylinder Mounting
D11R Track-Type Tractor Hydraulic System
Ripper Tip Cylinder
D11R Track-Type Tractor Hydraulic System
Ripper Lift Cylinder
D11R Track-Type Tractor Hydraulic System
Cylinder Mounting
D11R Track-Type Tractor Hydraulic System
Tool Operating Manual
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Service Letter-China
PRODUCT SUPPORT PROGRAM FOR REPLACING THE DUAL TILT CYLINDER ASSEMBLY ON CERTAIN D11R AND D11T TRACK-TYPE TRACTORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE DUAL TILT CYLINDER ASSEMBLY ON CERTAIN D11R AND D11T TRACK-TYPE TRACTORS
PRODUCT SUPPORT PROGRAM FOR INSTALLING NEW HYDRAULIC CYLINDER WIPER SEALS ON CERTAIN 988G, 990 II, 992G WHEEL LOADERS D9R, D10R AND D11R TRACK TYPE TRACTORS
PRODUCT SUPPORT PROGRAM FOR INSTALLING NEW HYDRAULIC CYLINDER WIPER SEALS ON CERTAIN 988G, 990 II, 992G WHEEL LOADERS D9R, D10R AND D11R TRACK TYPE TRACTORS
PRODUCT SUPPORT PROGRAM FOR TIGHTENING THE CYLINDER ROD NUT FOR THE TILT CYLINDER AND/OR THE LIFT CYLINDER ON CERTAIN D11R TRACK TYPE TRACTORS
PRODUCT SUPPORT PROGRAM FOR TIGHTENING THE CYLINDER ROD NUT FOR THE TILT CYLINDER AND/OR THE LIFT CYLINDER ON CERTAIN D11R TRACK TYPE TRACTORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE ROD SEAL ON THE LIFT CYLINDER ON CERTAIN D10T AND D11R TRACK TYPE TRACTORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE ROD SEAL ON THE LIFT CYLINDER ON CERTAIN D10T AND D11R TRACK TYPE TRACTORS
Service Letter-Asia
PRODUCT SUPPORT PROGRAM FOR REPLACING THE DUAL TILT CYLINDER ASSEMBLY ON CERTAIN D11R AND D11T TRACK-TYPE TRACTORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE DUAL TILT CYLINDER ASSEMBLY ON CERTAIN D11R AND D11T TRACK-TYPE TRACTORS
PRODUCT SUPPORT PROGRAM FOR INSTALLING NEW HYDRAULIC CYLINDER WIPER SEALS ON CERTAIN 988G, 990 II, 992G WHEEL LOADERS D9R, D10R AND D11R TRACK TYPE TRACTORS
PRODUCT SUPPORT PROGRAM FOR INSTALLING NEW HYDRAULIC CYLINDER WIPER SEALS ON CERTAIN 988G, 990 II, 992G WHEEL LOADERS D9R, D10R AND D11R TRACK TYPE TRACTORS
PRODUCT SUPPORT PROGRAM FOR TIGHTENING THE CYLINDER ROD NUT FOR THE TILT CYLINDER AND/OR THE LIFT CYLINDER ON CERTAIN D11R TRACK TYPE TRACTORS
PRODUCT SUPPORT PROGRAM FOR TIGHTENING THE CYLINDER ROD NUT FOR THE TILT CYLINDER AND/OR THE LIFT CYLINDER ON CERTAIN D11R TRACK TYPE TRACTORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE ROD SEAL ON THE LIFT CYLINDER ON CERTAIN D10T AND D11R TRACK TYPE TRACTORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE ROD SEAL ON THE LIFT CYLINDER ON CERTAIN D10T AND D11R TRACK TYPE TRACTORS
Reuse And Salvage Guidelines
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Yoke Bearing Journals on Bulldozer Lift Cylinders for Track-Type Tractors and Wheel Dozers {6068, 7562}
Yoke Bearing Journals on Bulldozer Lift Cylinders for Track-Type Tractors and Wheel Dozers {6068, 7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
Thermal Spray Procedures for TTT Dozer Yokes {0599, 0679, 7562}
Thermal Spray Procedures for TTT Dozer Yokes {0599, 0679, 7562}
Contamination Control Guidelines
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Applied Failure Analysis
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Service Letter-APD
PRODUCT SUPPORT PROGRAM FOR REPLACING THE DUAL TILT CYLINDER ASSEMBLY ON CERTAIN D11R AND D11T TRACK-TYPE TRACTORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE DUAL TILT CYLINDER ASSEMBLY ON CERTAIN D11R AND D11T TRACK-TYPE TRACTORS
PRODUCT SUPPORT PROGRAM FOR INSTALLING NEW HYDRAULIC CYLINDER WIPER SEALS ON CERTAIN 988G, 990 II, 992G WHEEL LOADERS D9R, D10R AND D11R TRACK TYPE TRACTORS
PRODUCT SUPPORT PROGRAM FOR INSTALLING NEW HYDRAULIC CYLINDER WIPER SEALS ON CERTAIN 988G, 990 II, 992G WHEEL LOADERS D9R, D10R AND D11R TRACK TYPE TRACTORS
PRODUCT SUPPORT PROGRAM FOR TIGHTENING THE CYLINDER ROD NUT FOR THE TILT CYLINDER AND/OR THE LIFT CYLINDER ON CERTAIN D11R TRACK TYPE TRACTORS
PRODUCT SUPPORT PROGRAM FOR TIGHTENING THE CYLINDER ROD NUT FOR THE TILT CYLINDER AND/OR THE LIFT CYLINDER ON CERTAIN D11R TRACK TYPE TRACTORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE ROD SEAL ON THE LIFT CYLINDER ON CERTAIN D10T AND D11R TRACK TYPE TRACTORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE ROD SEAL ON THE LIFT CYLINDER ON CERTAIN D10T AND D11R TRACK TYPE TRACTORS
Bench Test Procedures
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Disassembly and Assembly
Ripper Lift Cylinder - Remove and Install
D11R Track-Type Tractor Machine Systems
Ripper Pin Puller Cylinder - Remove and Install
D11R Track-Type Tractor Machine Systems
Ripper Tilt Cylinder - Remove and Install
D11R Track-Type Tractor Machine Systems
Bulldozer Lift Cylinder - Remove and Install
D11R Track-Type Tractor Machine Systems
Bulldozer Lift Cylinder Mounts - Remove and Install
D11R Track-Type Tractor Machine Systems
Service Magazine
Improved Lift Cylinder Assemblies and Mounting Groups Improve Reliability {5102, 5103}
2011/12/23
Double Lip Wiper Seals Must Be Installed Properly {7562}
2002/12/09
Correction to Special Instruction , "Installation of 11SU (S/N: 8PP) and 11U (S/N: 8RP) Bulldozer with a Single Tilt Cylinder" {5104, 6060, 6082}
2003/06/16
Correction to Special Instruction , "Installation of 11SU (S/N: 8PP) and 11U (S/N: 8RP) Bulldozer with Dual Tilt Cylinder" {5104, 6060, 6082}
2003/06/16
An Improved Piston is Now Used in Hydraulic Cylinders {5102}
2004/07/05
A New Rod Nut and Piston for the Tilt Cylinder, and New Tightening Instructions Are Now Used {5104}
2005/01/24
Correction to Specifications , "Bulldozer Lift Cylinders" {5102}
2005/05/09
Improved Rod Seals for the Lift Cylinder Are Now Available {5102}
2007/12/31
Procedure Now Available to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
2008/04/28
The Same Lift Cylinder Is Used On Both the Right Hand Side and the Left Hand Side {5102}
2009/02/02
Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
2009/01/05
A Rework Procedure Improves the Seal Assembly Performance in Hydraulic Cylinders on Cat Products {7562}
2010/04/30
The Hose Material for the Dozer Lift Lines on the D11T and D11R has Changed {5102}
2010/09/13
New Bulldozer Tilt Cylinders Are Available For The D11R And D11T {5104}
2012/06/01
A New Self-Aligning Bearing for the Dual Tilt Cylinder Group Is Now Available on Certain D11R and D11T Track-Type Tractors {5104}
2014/12/24
New Lift Cylinder Yoke Is Now Used on Certain D11R and D11T Track-Type Tractors {7562}
2015/02/02
Systems Operation
Fan Drive System
D11R Track-Type Tractor Hydraulic System
Disassembly and Assembly
Auxiliary Hydraulic Pump Drive Shaft - Remove and Install
D11R Track-Type Tractor Machine Systems
Operation and Maintenance Manual
Electro/Hydraulic Oil Filter - Change
D11R Track-Type Tractor
Oil Filter - Inspect
D11R Track-Type Tractor
Hydraulic System Oil Filter - Replace
D11R Track-Type Tractor
Special Instruction
Guidelines for the Use of Clean Out Filters for the Hydraulic Oil System and for the Power Train Oil System{3067, 5068}
Guidelines for the Use of Clean Out Filters for the Hydraulic Oil System and for the Power Train Oil System{3067, 5068}
Guidelines for the Use of High Efficiency Filters for the Hydraulic Oil System and for the Power Train Oil System {3000, 3004, 5050, 5068}
Guidelines for the Use of High Efficiency Filters for the Hydraulic Oil System and for the Power Train Oil System {3000, 3004, 5050, 5068}
Technical Information Bulletin
Bearing Shields May Be Source Of Foreign Material In Suction Screens And PTO Filters
Bearing Shields May Be Source Of Foreign Material In Suction Screens And PTO Filters
Specifications
Oil Filter (Implement Pilot)
D11R Track-Type Tractor Hydraulic System
Hydraulic System Oil Filter
D11R Track-Type Tractor Hydraulic System
Tool Operating Manual
Procedures for Using 9U-5971 and 173-9842 Filter Cart Group {0599, 0738, 5050, 5056, 5057, 5068, 5095, 7579}
Procedures for Using 9U-5971 and 173-9842 Filter Cart Group {0599, 0738, 5050, 5056, 5057, 5068, 5095, 7579}
188-3242 Filter Cart Group and 227-2479 Filter Cart Group{0374, 0599, 0680, 0738, 0768, 5050, 5056, 5095}
188-3242 Filter Cart Group and 227-2479 Filter Cart Group{0374, 0599, 0680, 0738, 0768, 5050, 5056, 5095}
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Service Magazine
Addition of Serial Numbers to An Improved Bypass Switch Is Now Used {1435}
2000/05/01
Color Coded Dust Caps for S&middot;O&middot;S Ports Will Be Available {7770}
2003/12/01
A Replacement Filter Is Incorrectly Identified {5050, 5068}
2002/12/23
Optional High Efficiency Filters Are Now Available {3004, 5068}
2007/12/17
Torque for the Pressure Switch In the Oil Filter Group Is Now Updated On Certain Cat Product {3004, 3067, 5068}
2009/11/09
New Oil Filters for all Cat Machines are Available {3004, 3067, 4295, 431F, 5068}
New Oil Filters for all Cat Machines are Available {3004, 3067, 4295, 431F, 5068}
An Alternate Oil Filter Element for the Transmission Oil Filter Group Is Now Available for Certain Cat <SUP>&reg;</SUP> Machines {3004, 3067, 5056, 5068}
2013/02/21
Service Letter-NACD
PRODUCT SUPPORT PROGRAM FOR REPLACING THE IMPLEMENT PUMP ON CERTAIN D11T AND D11R TRACK-TYPE TRACTORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE IMPLEMENT PUMP ON CERTAIN D11T AND D11R TRACK-TYPE TRACTORS
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-China
Service Letter-Asia
Service Letter-APD
Technical Information Bulletin
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Special Instruction
New Hose Couplings Are Now Used{0684, 5057, 5057, 7554}
New Hose Couplings Are Now Used{0684, 5057, 5057, 7554}
Proper Installation of Braided Steel Hoses{7554}
Proper Installation of Braided Steel Hoses{7554}
O-Rings - Radial, Fitting Assembly O-Rings and Other O-Ring Applications {0599, 0738, 4000, 4250, 4300, 5050, 5057, 7555}
O-Rings - Radial, Fitting Assembly O-Rings and Other O-Ring Applications {0599, 0738, 4000, 4250, 4300, 5050, 5057, 7555}
Technical Information Bulletin
The Flange Head on <NOBR>442-5593</NOBR> Coupling As May Have Been Manufactured Incorrectly {5057}
The Flange Head on 442-5593 Coupling As May Have Been Manufactured Incorrectly {5057}
Tool Operating Manual
358-4528 (380/480 V, 50/60 Hz, 3 Phase), 457-6040 (230V, 60 Hz, Single Phase) , 457-6039 (230V, 50 Hz, Single Phase) Hose Machine Group Set-Up and Operation{0599, 0684}
358-4528 (380/480 V, 50/60 Hz, 3 Phase), 457-6040 (230V, 60 Hz, Single Phase) , 457-6039 (230V, 50 Hz, Single Phase) Hose Machine Group Set-Up and Operation{0599, 0684}
Crimputer III Setup and Operation{0684, 5057}
Crimputer III Setup and Operation{0684, 5057}
Crimping Caterpillar 1E294, 1E716, 1E844 Hose and Couplings {0374, 0599, 0684, 0738, 5057}
Crimping Caterpillar 1E294, 1E716, 1E844 Hose and Couplings {0374, 0599, 0684, 0738, 5057}
Using the 209-3153 Portable Hose Machine {0374, 0599, 0684, 0738, 5057}
Using the 209-3153 Portable Hose Machine {0374, 0599, 0684, 0738, 5057}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
Converting 137-7238 Hose Assembly Machines and 134-5640 Hose Assembly Machines (100 Ton) from Sony Control to Crimputer Control{0374, 0599, 0684, 5057}
Converting 137-7238 Hose Assembly Machines and 134-5640 Hose Assembly Machines (100 Ton) from Sony Control to Crimputer Control{0374, 0599, 0684, 5057}
Set up and Basic Operation of the 145-5161 Floor Model Hose Machine {0374, 0599, 0684, 0738, 5057}
Set up and Basic Operation of the 145-5161 Floor Model Hose Machine {0374, 0599, 0684, 0738, 5057}
Using the 9U-5792, 4C-5052, 4C-5054, 4C-3670, and 4C-3680 Hydraulic Hose Machines{0374, 0599, 0684, 0738, 5057}
Using the 9U-5792, 4C-5052, 4C-5054, 4C-3670, and 4C-3680 Hydraulic Hose Machines{0374, 0599, 0684, 0738, 5057}
243-0765 Bench Model Hose Machine For Use With the 242-3567 Variable Crimp Die Bowl{0374, 0599, 0684, 0738, 5057}
243-0765 Bench Model Hose Machine For Use With the 242-3567 Variable Crimp Die Bowl{0374, 0599, 0684, 0738, 5057}
Crimping Permanent Couplings Using the 136-3642 Crimp Tool Group in Combination and XT Hose Machines{0374, 0599, 0684, 5057}
Crimping Permanent Couplings Using the 136-3642 Crimp Tool Group in Combination and XT Hose Machines{0374, 0599, 0684, 5057}
Reuse And Salvage Guidelines
Crimputer III Setup and Operation{0684, 5057}
Crimputer III Setup and Operation{0684, 5057}
Contamination Control Guidelines
Hose Products Reference Guide {0374, 0599, 0684, 0738, 5057}
Hose Products Reference Guide {0374, 0599, 0684, 0738, 5057}
Service Magazine
Information Release Memo, HOS04-02, "XT-6 Hose and Couplings to XT-6 ES Components" Is Available {5057}
2004/06/21
Information Release Memo, PELJ0340 , "Reusable Couplings for Caterpillar -12 and -16 XT-6 ES Hose" {5057}
2004/06/28
Information Release Memo, PELJ0481 , "Product Line Expansion for Caterpillar Low and Medium Pressure Hose and Coupling Products" {5057}
2005/02/21
The 6V-8633 Connector Has Changed {5057, 7553}
2005/11/28
An Improved Hose Routing Is Now Available {5057}
2005/11/14
Caterpillar Hose and Coupling Practices {0618, 1000, 5057, 7000}
2008/05/26
The 6V-8633 Connector Has Changed {5057, 7553}
2005/11/28
Bolt-on Tube Guards for the 11SU (S/N: 8RP) and the 11U (S/N: 8PP) Bulldozers are Now Used {7167}
2001/09/24
Disassembly and Assembly
Dual Tilt Control Valve - Remove
D11R Track-Type Tractor Machine Systems
Service Magazine
A Guardrail Retrofit Kit Is Now Available For D10R, D10T, D11R, and D11T Track-Type Tractors {1408, 1435, 5051, 5057, 5082, 7150, 7252, 7254, 7255, 7256}
2012/07/02
The 6V-8633 Connector Has Changed {5057, 7553}
2005/11/28
Special Instruction
Installing the Updated Hoses For the Tilt Lines and the Implement Pump{5057, 5084}
Installing the Updated Hoses For the Tilt Lines and the Implement Pump{5057, 5084}
Procedure to Update the Dozer Tilt Lines on Certain D11R and D11T Track-Type Tractors{5057, 5104}
Procedure to Update the Dozer Tilt Lines on Certain D11R and D11T Track-Type Tractors{5057, 5104}
Installation Procedure for Improved Lift Cylinder Lines Certain D11R and D11T Track-Type Tractors{5057, 5102}
Installation Procedure for Improved Lift Cylinder Lines Certain D11R and D11T Track-Type Tractors{5057, 5102}
Service Magazine
Improved Tilt Cylinder Hoses and Retention At the Implement Pump {5057}
2006/12/18
Improved Bolt Retention for the Lift Cylinder Bracket {5057, 5102}
2008/04/28
An Improved Hose and a Bracket Are Now Available {5084, 5104}
2009/03/23
New Lift Cylinder Hose Assembly Is Now Available for Certain D11R and D11T Track-Type Tractors {5057, 5102}
2015/09/09
Operation and Maintenance Manual
High Pressure Screens - Clean/Replace - If Equipped
D11R Track-Type Tractor
Special Instruction
Hose and Coupling Assembly and Repair Process Guide{0684, 3016, 3103, 3154, 4133, 4257, 4304, 5057, 7554}
Hose and Coupling Assembly and Repair Process Guide{0684, 3016, 3103, 3154, 4133, 4257, 4304, 5057, 7554}
New Hose Couplings Are Now Used{0684, 5057, 5057, 7554}
New Hose Couplings Are Now Used{0684, 5057, 5057, 7554}
O-Rings - Radial, Fitting Assembly O-Rings and Other O-Ring Applications {0599, 0738, 4000, 4250, 4300, 5050, 5057, 7555}
O-Rings - Radial, Fitting Assembly O-Rings and Other O-Ring Applications {0599, 0738, 4000, 4250, 4300, 5050, 5057, 7555}
Technical Information Bulletin
Some Hydraulic Couplings are Identified with an Incorrect Part Number{5057}
Some Hydraulic Couplings are Identified with an Incorrect Part Number{5057}
The Flange Head on <NOBR>442-5593</NOBR> Coupling As May Have Been Manufactured Incorrectly {5057}
The Flange Head on 442-5593 Coupling As May Have Been Manufactured Incorrectly {5057}
Specifications
Accumulator
D11R Track-Type Tractor Hydraulic System
Tool Operating Manual
358-4528 (380/480 V, 50/60 Hz, 3 Phase), 457-6040 (230V, 60 Hz, Single Phase) , 457-6039 (230V, 50 Hz, Single Phase) Hose Machine Group Set-Up and Operation{0599, 0684}
358-4528 (380/480 V, 50/60 Hz, 3 Phase), 457-6040 (230V, 60 Hz, Single Phase) , 457-6039 (230V, 50 Hz, Single Phase) Hose Machine Group Set-Up and Operation{0599, 0684}
Crimputer III Setup and Operation{0684, 5057}
Crimputer III Setup and Operation{0684, 5057}
242-3567 Variable Crimp Die Bowl{0684}
242-3567 Variable Crimp Die Bowl{0684}
Crimping Caterpillar 1E294, 1E716, 1E844 Hose and Couplings {0374, 0599, 0684, 0738, 5057}
Crimping Caterpillar 1E294, 1E716, 1E844 Hose and Couplings {0374, 0599, 0684, 0738, 5057}
Using the 209-3153 Portable Hose Machine {0374, 0599, 0684, 0738, 5057}
Using the 209-3153 Portable Hose Machine {0374, 0599, 0684, 0738, 5057}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
Converting 137-7238 Hose Assembly Machines and 134-5640 Hose Assembly Machines (100 Ton) from Sony Control to Crimputer Control{0374, 0599, 0684, 5057}
Converting 137-7238 Hose Assembly Machines and 134-5640 Hose Assembly Machines (100 Ton) from Sony Control to Crimputer Control{0374, 0599, 0684, 5057}
Set up and Basic Operation of the 145-5161 Floor Model Hose Machine {0374, 0599, 0684, 0738, 5057}
Set up and Basic Operation of the 145-5161 Floor Model Hose Machine {0374, 0599, 0684, 0738, 5057}
Using the 9U-5792, 4C-5052, 4C-5054, 4C-3670, and 4C-3680 Hydraulic Hose Machines{0374, 0599, 0684, 0738, 5057}
Using the 9U-5792, 4C-5052, 4C-5054, 4C-3670, and 4C-3680 Hydraulic Hose Machines{0374, 0599, 0684, 0738, 5057}
Reuse And Salvage Guidelines
Crimputer III Setup and Operation{0684, 5057}
Crimputer III Setup and Operation{0684, 5057}
Contamination Control Guidelines
Hose Products Reference Guide {0374, 0599, 0684, 0738, 5057}
Hose Products Reference Guide {0374, 0599, 0684, 0738, 5057}
Testing and Adjusting
Relief Valve - Test and Adjust
D11R Track-Type Tractor Hydraulic System
Service Magazine
Color Coded Dust Caps for S&middot;O&middot;S Ports Will Be Available {7770}
2003/12/01
New Valves Improve the Hydraulic Fan System and the Pilot System {1387, 5051, 5057, 5059}
2003/02/17
Information Release Memo, HOS04-02, "XT-6 Hose and Couplings to XT-6 ES Components" Is Available {5057}
2004/06/21
Information Release Memo, PELJ0340 , "Reusable Couplings for Caterpillar -12 and -16 XT-6 ES Hose" {5057}
2004/06/28
Five New Wrenches Remove Snap To Connect Couplings from Hydraulic Hose Assemblies {0602, 0738, 5057}
2006/02/13
Improved Bolt Retention for the Lift Cylinder Bracket {5057, 5102}
2008/04/28
Caterpillar Hose and Coupling Practices {0618, 1000, 5057, 7000}
2008/05/26
An Improved Hydraulic Tube That Connects To the Hydraulic Fan Motor Is Now Available {5057}
2008/10/27
A Guardrail Retrofit Kit Is Now Available For D10R, D10T, D11R, and D11T Track-Type Tractors {1408, 1435, 5051, 5057, 5082, 7150, 7252, 7254, 7255, 7256}
2012/07/02
The Hydraulic Tank Relief Valve Assembly Has Been Improved on Certain Cat<SUP>&reg;</SUP> Machines {4332, 4332, 5056, 5056, 5057, 5118}
2015/03/17
Hydraulic Hose Suppression Sleeves for Certain Machines are Now Available {5057}
Hydraulic Hose Suppression Sleeves for Certain Machines are Now Available {5057}
Operation and Maintenance Manual
High Pressure Screens - Clean/Replace - If Equipped
D11R Track-Type Tractor
Special Instruction
Installation of Valves that Improve the Hydraulic Fan System and the Pilot System{1387, 5051, 5057, 5059}
Installation of Valves that Improve the Hydraulic Fan System and the Pilot System{1387, 5051, 5057, 5059}
Procedure for Replacing the Fan Tube On the D11 With XT3 Hose{1386, 1387, 5057}
Procedure for Replacing the Fan Tube On the D11 With XT3 Hose{1386, 1387, 5057}
Service Magazine
New Valves Improve the Hydraulic Fan System and the Pilot System {1387, 5051, 5057, 5059}
2003/02/17
An Improved Hydraulic Tube That Connects To the Hydraulic Fan Motor Is Now Available {5057}
2008/10/27
The Fan Tube Can Be Replaced With XTR Hose On the D11R and D11T {1386, 1387, 5057}
2012/05/02
Special Instruction
Installation of Valves that Improve the Hydraulic Fan System and the Pilot System{1387, 5051, 5057, 5059}
Installation of Valves that Improve the Hydraulic Fan System and the Pilot System{1387, 5051, 5057, 5059}
Procedure for Replacing the Fan Tube On the D11 With XT3 Hose{1386, 1387, 5057}
Procedure for Replacing the Fan Tube On the D11 With XT3 Hose{1386, 1387, 5057}
Technical Information Bulletin
The Flange Head on <NOBR>442-5593</NOBR> Coupling As May Have Been Manufactured Incorrectly {5057}
The Flange Head on 442-5593 Coupling As May Have Been Manufactured Incorrectly {5057}
Testing and Adjusting
Pilot System Pressure - Test and Adjust
D11R Track-Type Tractor Hydraulic System
Service Magazine
New Valves Improve the Hydraulic Fan System and the Pilot System {1387, 5051, 5057, 5059}
2003/02/17
Correction to Testing and Adjusting , "Pilot System Pressure - Test and Adjust" {5050, 5050}
2003/03/31
The Fan Tube Can Be Replaced With XTR Hose On the D11R and D11T {1386, 1387, 5057}
2012/05/02
Special Instruction
Installing the Updated Hoses For the Tilt Lines and the Implement Pump{5057, 5084}
Installing the Updated Hoses For the Tilt Lines and the Implement Pump{5057, 5084}
Improved Routing Of The Hoses For The Implement Pump Pressure Sensor{5057, 5084}
Improved Routing Of The Hoses For The Implement Pump Pressure Sensor{5057, 5084}
Procedure for Replacing the Fan Tube On the D11 With XT3 Hose{1386, 1387, 5057}
Procedure for Replacing the Fan Tube On the D11 With XT3 Hose{1386, 1387, 5057}
Technical Information Bulletin
The Flange Head on <NOBR>442-5593</NOBR> Coupling As May Have Been Manufactured Incorrectly {5057}
The Flange Head on 442-5593 Coupling As May Have Been Manufactured Incorrectly {5057}
Specifications
Breaker Relief Valve
D11R Track-Type Tractor Hydraulic System
Service Magazine
A New Hose Assembly Is Now Used {5057}
2002/05/27
New Hoses Are Now Used {5057}
2003/01/20
Improved Tilt Cylinder Hoses and Retention At the Implement Pump {5057}
2006/12/18
Improved Hoses And Routing For The Pressure Sensor Are Now Available {5057, 5084}
2007/11/26
An Improved Hose and a Bracket Are Now Available {5084, 5104}
2009/03/23
The Fan Tube Can Be Replaced With XTR Hose On the D11R and D11T {1386, 1387, 5057}
2012/05/02
The 6V-8633 Connector Has Changed {5057, 7553}
2005/11/28
Special Instruction
Procedure To Clean D11R/T Track-Type Tractor Fan/Implement Oil Systems {5051, 5059, 5073, 5264}
Procedure To Clean D11R/T Track-Type Tractor Fan/Implement Oil Systems {5051, 5059, 5073, 5264}
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
Service Letter-NACD
1673848 Joysticks (Cont Gp-Mtg) In Dealer Parts Stock Need To Be Inspected
1673848 Joysticks (Cont Gp-Mtg) In Dealer Parts Stock Need To Be Inspected
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-China
Service Letter-Asia
Service Letter-APD
Special Instruction
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Test Specifications for Vane Cartridges{0784, 5058, 5070}
Test Specifications for Vane Cartridges{0784, 5058, 5070}
Specifications
Fan Drive Motor
D11R Track-Type Tractor Hydraulic System
Fan Drive Motor
D11R Track-Type Tractor Hydraulic System
Tool Operating Manual
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
Systems Operation
Fan Drive Motor
D11R Track-Type Tractor Hydraulic System
Reuse And Salvage Guidelines
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Specifications and Reusability for Hydraulic Gear Pumps and Motors{5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors{5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 9, 10, and 11) {5061, 506G, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 9, 10, and 11) {5061, 506G, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Hydraulic Piston Motors{5058}
Hydraulic Piston Motors{5058}
General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070}
General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070}
Information Release Memo
CAT REMAN EXPANDS HYD GEAR &amp; PISTON PUMP &amp; MOTOR OPTIONS
CAT REMAN EXPANDS HYD GEAR & PISTON PUMP & MOTOR OPTIONS
Testing and Adjusting
Motor Rotating Group (Fan Drive) - Adjust
D11R Track-Type Tractor Hydraulic System
Bench Test Procedures
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Disassembly and Assembly
Fan - Remove and Install
D11R Track-Type Tractor Machine Systems
Fan Drive Motor - Assemble
D11R Track-Type Tractor Machine Systems
Fan Drive Motor - Disassemble
D11R Track-Type Tractor Machine Systems
Fan Drive Motor - Remove
D11R Track-Type Tractor Machine Systems
Fan Drive Motor - Install
D11R Track-Type Tractor Machine Systems
Service Magazine
A Hydraulic Fan Motor and Fan Adapter With an Improved Tapered Bolted Joint Is Now Used {1386}
2008/11/24
A Guardrail Retrofit Kit Is Now Available For D10R, D10T, D11R, and D11T Track-Type Tractors {1408, 1435, 5051, 5057, 5082, 7150, 7252, 7254, 7255, 7256}
2012/07/02
Reuse And Salvage Guidelines
Thermal Spray Procedures for TTT Dozer Yokes {0599, 0679, 7562}
Thermal Spray Procedures for TTT Dozer Yokes {0599, 0679, 7562}
Service Magazine
New Lift Cylinder Yoke Is Now Used on Certain D11R and D11T Track-Type Tractors {7562}
2015/02/02
Special Instruction
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Nexus Gear Pump Porting{5073}
Nexus Gear Pump Porting{5073}
Repair Process for Hydraulic Gear Pumps {5073}
Repair Process for Hydraulic Gear Pumps {5073}
Test Specifications for Vane Cartridges{0784, 5058, 5070}
Test Specifications for Vane Cartridges{0784, 5058, 5070}
Improved Routing Of The Hoses For The Implement Pump Pressure Sensor{5057, 5084}
Improved Routing Of The Hoses For The Implement Pump Pressure Sensor{5057, 5084}
Vane Type Hydraulic Pump Identification Guidelines {5055}
Vane Type Hydraulic Pump Identification Guidelines {5055}
Procedure To Clean D11R/T Track-Type Tractor Fan/Implement Oil Systems {5051, 5059, 5073, 5264}
Procedure To Clean D11R/T Track-Type Tractor Fan/Implement Oil Systems {5051, 5059, 5073, 5264}
Service Letter-NACD
PRODUCT SUPPORT PROGRAM FOR REPLACING THE IMPLEMENT PUMP ON CERTAIN D11T AND D11R TRACK-TYPE TRACTORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE IMPLEMENT PUMP ON CERTAIN D11T AND D11R TRACK-TYPE TRACTORS
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Specifications
Fan Drive Pump
D11R Track-Type Tractor Hydraulic System
Gear Pump (Implement)
D11R Track-Type Tractor Hydraulic System
Tool Operating Manual
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
Service Letter-China
PRODUCT SUPPORT PROGRAM FOR REPLACING THE IMPLEMENT PUMP ON CERTAIN D11T AND D11R TRACK-TYPE TRACTORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE IMPLEMENT PUMP ON CERTAIN D11T AND D11R TRACK-TYPE TRACTORS
Service Letter-Asia
Systems Operation
Fan Drive Pump
D11R Track-Type Tractor Hydraulic System
Hydraulic Pump - Gear
D11R Track-Type Tractor Hydraulic System
Reuse And Salvage Guidelines
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Vane Type Hydraulic Pumps {5055}
Vane Type Hydraulic Pumps {5055}
Repair Process for Hydraulic Gear Pumps {5073}
Repair Process for Hydraulic Gear Pumps {5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors{5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors{5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 9, 10, and 11) {5061, 506G, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 9, 10, and 11) {5061, 506G, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Removing and Installing Bushings and Pressure Plates in Hydraulic Gear Pumps {5073}
Removing and Installing Bushings and Pressure Plates in Hydraulic Gear Pumps {5073}
Hydraulic Piston Pumps Used in Certain Models of Caterpillar Equipment{3203, 5070, 5084}
Hydraulic Piston Pumps Used in Certain Models of Caterpillar Equipment{3203, 5070, 5084}
Vane Type Hydraulic Pump Identification Guidelines {5055}
Vane Type Hydraulic Pump Identification Guidelines {5055}
General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070}
General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070}
Thermal Spray Procedures for Tyrone Drive Shaft (Pump Gear){0679, 3066, 5073}
Thermal Spray Procedures for Tyrone Drive Shaft (Pump Gear){0679, 3066, 5073}
Information Release Memo
CAT REMAN EXPANDS HYD GEAR &amp; PISTON PUMP &amp; MOTOR OPTIONS
CAT REMAN EXPANDS HYD GEAR & PISTON PUMP & MOTOR OPTIONS
Service Letter-APD
PRODUCT SUPPORT PROGRAM FOR REPLACING THE IMPLEMENT PUMP ON CERTAIN D11T AND D11R TRACK-TYPE TRACTORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE IMPLEMENT PUMP ON CERTAIN D11T AND D11R TRACK-TYPE TRACTORS
Bench Test Procedures
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Bench Test Procedure for Gear Pumps {5073}
Bench Test Procedure for Gear Pumps {5073}
Bench Test Procedure for Vane Pumps {5055}
Bench Test Procedure for Vane Pumps {5055}
Bench Test Procedure for Hydraulic Piston Pumps {5070}
Bench Test Procedure for Hydraulic Piston Pumps {5070}
Bench Test Procedure for Hydraulic Piston Pumps{5070}
Bench Test Procedure for Hydraulic Piston Pumps{5070}
Disassembly and Assembly
Fan Drive Pump (Fixed Displacement, Rear) - Assemble
D11R Track-Type Tractor Machine Systems
Fan Drive Pump (Fixed Displacement, Rear) - Disassemble
D11R Track-Type Tractor Machine Systems
Fan Drive Pump (Fixed Displacement, Rear) - Install
D11R Track-Type Tractor Machine Systems
Fan Drive Pump (Fixed Displacement, Rear) - Remove
D11R Track-Type Tractor Machine Systems
Fan Drive Pump (Variable Displacement, Front) - Assemble
D11R Track-Type Tractor Machine Systems
Fan Drive Pump (Variable Displacement, Front) - Disassemble
D11R Track-Type Tractor Machine Systems
Fan Drive Pump (Variable Displacement, Front) - Install
D11R Track-Type Tractor Machine Systems
Fan Drive Pump (Variable Displacement, Front) - Remove
D11R Track-Type Tractor Machine Systems
Implement Pump - Assemble
D11R Track-Type Tractor Machine Systems
Implement Pump - Disassemble
D11R Track-Type Tractor Machine Systems
Implement Pump - Install
D11R Track-Type Tractor Machine Systems
Implement Pump - Remove
D11R Track-Type Tractor Machine Systems
Service Magazine
D11R Implement Pump Update Provides Improved Quality and Fewer Leaks {5084}
2003/10/27
Cover Plate, Flange are Available for Use During Flow Tests on the Main Hydraulic Pumps {0738, 5070, 5084}
2005/04/25
Improved Hoses And Routing For The Pressure Sensor Are Now Available {5057, 5084}
2007/11/26
A New Service Tool for Installing the Service Sleeve Bearings in Hydraulic Gear Pumps Is Now Available for Certain CAT Machines {0738, 5073, 5073, 7551}
2013/10/31
An Improved Implement Pump Is Now Used On Certain D11 Track-Type Tractors and 854 Wheel Dozers {5073, 5084}
2013/12/03
Special Instruction, M0073501, "Procedure To Clean D11R/T Track-Type Tractor Fan/Implement Oil Systems" is Available {5073}
Special Instruction, M0073501, "Procedure To Clean D11R/T Track-Type Tractor Fan/Implement Oil Systems" is Available {5073}
New Metering Pump Groups For Steering Control Prevent Oil Leaks {4300, 4301, 4312}
2010/08/19
Special Instruction
Installation of the Hydraulic Oil Screens {5068}
Installation of the Hydraulic Oil Screens {5068}
Service Magazine
The Sealing for the Hydraulic Screen Group is Improved {5068}
2008/03/10
Disassembly and Assembly
Auxiliary Hydraulic Pump Drive Shaft - Remove and Install
D11R Track-Type Tractor Machine Systems
Reuse And Salvage Guidelines
Final Drive Steering System, Wheel Braking System, and Wheels & Tires Salvage and Reuse Manual Contents {4000, 4050, 4100, 4250, 4300}
Final Drive Steering System, Wheel Braking System, and Wheels & Tires Salvage and Reuse Manual Contents {4000, 4050, 4100, 4250, 4300}
Service Letter-NACD
PRODUCT SUPPORT PROGRAM FOR REWORKING OR REPLACING THE 163-0576 HYDRAULIC TANK ASSEMBLY ON CERTAIN D11R TRACK-TYPE TRACTORS
PRODUCT SUPPORT PROGRAM FOR REWORKING OR REPLACING THE 163-0576 HYDRAULIC TANK ASSEMBLY ON CERTAIN D11R TRACK-TYPE TRACTORS
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-China
Service Letter-Asia
Service Letter-APD

Truck sale:

Caterpillar D11R
 
Caterpillar D11R
- Crawler dozers
CLEVELAND BROTHERS EQUIPMENT COMPANY INC
Caterpillar D11R REBUILD, Crawler dozers, Construction
1,600,000 
Caterpillar D11R REBUILD, Crawler dozers, Construction
- Crawler dozers
CARTER MACHINERY COMPANY, INC.
Caterpillar D11R, Crawler dozers, Construction
399,000 
Caterpillar D11R, Crawler dozers, Construction
- Crawler dozers
HOLT OF CALIFORNIA
Caterpillar D11R, Rupsdozers, Bouw
1.220.000 
Caterpillar D11R, Rupsdozers, Bouw

CATERPILLAR FINANCIAL SERVICES CORPORATION
Caterpillar D11R, Rupsdozers, Bouw
 
Caterpillar D11R, Rupsdozers, Bouw
- Crawler dozers
FINNING CANADA
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.