261-8278 UNDERCARRIAGE AR -STRAIGHT S/N AAF1-UP; 7PZ1-UP FOR USE WITH UNDERCARRIAGE AR, STRAIGHT TRACK ROLLER FRAME & EQUALIZER BAR D11R

261-8278: UNDERCARRIAGE AR

261-8278 UNDERCARRIAGE AR -STRAIGHT
S/N AAF1-UP; 7PZ1-UP
FOR USE WITH UNDERCARRIAGE AR, STRAIGHT TRACK ROLLER FRAME & EQUALIZER BAR

Parts for your D11R TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Part No	Qty	Parts name
276-9026 Y	[16]	CAP GP-TRACK ROLLER

261-8287	[16]	BOGIE-MINOR

		***STANDARD REMOVAL***
9W-7266 N	[32]	CAP GP-TRACK ROLLER

		***ATTACHMENT REMOVAL***
9W-6723 N	[16]	BOGIE-MINOR
N		PART OF STANDARD UNDERCARRIAGE AR
Y		SEPARATE ILLUSTRATION

209-9081: CONTROL AR-HYDRAULIC

CONTROL AR-HYDRAULIC

209-9081 CONTROL AR-HYDRAULIC -AUTO CARRY
S/N AAF1-UP; 7PZ1-UP
STD TRACTOR REQUIRES 224-0829 & 201-4075 CYLINDER GPS

Parts for your D11R TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Part No	Qty	Parts name
220-1369 Y	[1]	ELECTRONICS AR-MACHINE (AUTO CARRY)
		S/N 7PZ1-661; AAF1-199
220-0547	[1]	CONFIGURATION-PREMIUM
		S/N 7PZ662-UP; AAF200-UP
		(DLR INSTALL CONFIG: SEE IRM: EES03-01)
194-7108 Y	[1]	LINES GP-HYDRAULIC (AUTO CARRY)
211-3191 Y	[1]	SENSOR GP-SPEED (GROUND, RADAR)
210-8396 Y	[1]	PANEL GP-CONTROL

7M-3361	[1]	GROMMET
211-7705	[1]	GUARD AS
6V-8190	[1]	NUT (1-8-THD)
8T-5911	[4]	NUT-WELD (1/2-13-THD)
136-5066	[1]	HARNESS AS-SENSOR (CYLINDER POSITION)
102-8803	[1]	KIT-RECEPTACLE (3-PIN)
		(INCLUDES RECEPTACLE AS & WEDGE)

		***STANDARD REMOVAL***
130-2547 L	[1]	GUARD AS
183-2076 N	[1]	CONTROL GP-ELECTRONIC
L		PART OF STANDARD GUARD GP - BOTTOM
N		PART OF STANDARD CONTROL GP - MTG
Y		SEPARATE ILLUSTRATION

101-8581: CYLINDER GP-RIPPER

CYLINDER GP-RIPPER

101-8581 CYLINDER GP-RIPPER -LIFT, RH
S/N GAZ1-UP
254-MM (10-IN) BORE X 613-MM (24.1-IN) STROKE
PART OF 4Z-0664 RIPPER AR

Parts for your D11R TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	102-0519	[1]	CYLINDER AS (RH)
1A.	2V-0481	[1]	BLOCK
	9J-1175	[2]	BUSHING
	4J-4955	[1]	SPACER (3X100X5-MM THK)
2.	4J-6888	[1]	LOCKNUT (2-3/4-12-THD)
3.	3G-3903	[1]	WASHER (70.23X140X11.94-MM THK)
4.	8C-3843 J	[1]	RING-WEAR
5.	102-0693 Y	[1]	PISTON GP-HYDRAULIC CYLINDER (RIPPER)
6.	102-0691	[1]	ROD AS
6A.	9J-1175	[2]	BUSHING
6B.	4J-4955	[1]	SPACER (3X100X5-MM THK)
7.	5P-2235 J	[1]	SEAL-O-RING
8.	1U-3307 J	[1]	RING-BACKUP
9.	334-2648	[1]	HEAD
	225-3286	[1]	SEAL-WIPER
10.	8T-6746 J	[1]	RING-WEAR
11.	311-9316 J	[1]	SEAL AS-BUFFER
12.	311-9317 J	[1]	SEAL-U-CUP
13.	3B-8489	[2]	FITTING-GREASE (1/8-27 PTF)
14.	311-9318 CJ	[1]	SEAL-WIPER
15.	3R-2300	[8]	BOLT (1-1/4-7X4.5-IN)
16.	4K-0684	[8]	WASHER-HARD (34X55X6-MM THK)
17.	1P-4577	[4]	FLANGE-HALF
18.	5S-7382	[8]	BOLT (3/8-16X1.375-IN)
19.	8T-4896	[8]	WASHER-HARD (10.2X18.5X2.5-MM THK)

			AVAILABLE REPAIR KIT(S):
	246-0635 J	[1]	KIT-HYDRAULIC CYLINDER
			(INCLUDES RINGS & SEALS)
	C		CHANGE FROM PREVIOUS TYPE
	J		KIT MARKED J SERVICE PART(S) MARKED J
	R		REMANUFACTURED PART MAY BE AVAILABLE
	Y		SEPARATE ILLUSTRATION

101-8614: CYLINDER GP-RIPPER

CYLINDER GP-RIPPER

101-8614 CYLINDER GP-RIPPER -LIFT, LH
S/N GAZ1-UP
254-MM (10-IN) BORE X 613-MM (24.1-IN) STROKE
PART OF 4Z-0664 RIPPER AR

Parts for your D11R TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	102-0520	[1]	CYLINDER AS (LH)
	9J-1175	[2]	BUSHING
	4J-4955	[1]	SPACER (3X100X5-MM THK)
2.	4J-6888	[1]	LOCKNUT (2-3/4-12-THD)
3.	3G-3903	[1]	WASHER (70.23X140X11.94-MM THK)
4.	8C-3843 J	[1]	RING-WEAR
5.	102-0693 Y	[1]	PISTON GP-HYDRAULIC CYLINDER (RIPPER)
6.	102-0691	[1]	ROD AS
6A.	9J-1175	[2]	BUSHING
6B.	4J-4955	[1]	SPACER (3X100X5-MM THK)
7.	5P-2235 J	[1]	SEAL-O-RING
8.	1U-3307 J	[1]	RING-BACKUP
9.	334-2648	[1]	HEAD
	225-3286	[1]	SEAL-WIPER
10.	8T-6746 J	[1]	RING-WEAR
11.	311-9316 CJ	[1]	SEAL AS-BUFFER
12.	311-9317 CJ	[1]	SEAL-U-CUP
13.	3B-8489	[2]	FITTING-GREASE (1/8-27 PTF)
14.	311-9318 CJ	[1]	SEAL-WIPER
15.	3R-2300	[8]	BOLT (1-1/4-7X4.5-IN)
16.	4K-0684	[8]	WASHER-HARD (34X55X6-MM THK)
17.	1P-4577	[4]	FLANGE-HALF
18.	5S-7382	[8]	BOLT (3/8-16X1.375-IN)
19.	8T-4896	[8]	WASHER-HARD (10.2X18.5X2.5-MM THK)

			AVAILABLE REPAIR KIT(S):
	246-0635 J	[1]	KIT-HYDRAULIC CYLINDER
			(INCLUDES RINGS & SEALS)
	C		CHANGE FROM PREVIOUS TYPE
	J		KIT MARKED J SERVICE PART(S) MARKED J
	R		REMANUFACTURED PART MAY BE AVAILABLE
	Y		SEPARATE ILLUSTRATION

130-3263: CYLINDER GP-RIPPER

CYLINDER GP-RIPPER

130-3263 CYLINDER GP-RIPPER -TILT, RH
S/N GAZ1-UP
196.85-MM (7.75-IN.) BORE X 830-MM (32.7-IN.) STROKE
PART OF 4Z-0664 RIPPER AR

Parts for your D11R TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	130-3261	[1]	CYLINDER AS (RH)
	4J-4955	[1]	SPACER (3X100X5-MM THK)
	9J-1175	[2]	BUSHING
2.	4J-6888	[1]	LOCKNUT (2-3/4-12-THD)
3.	6E-5660	[2]	WASHER (71X120X8-MM THK)
4.	9J-5037 J	[1]	RING-WEAR
5.	8T-1792 J	[1]	SEAL AS
6.	6E-5701	[1]	PISTON
7.	5K-1787 J	[1]	SEAL-O-RING
8.	8J-0548 J	[1]	RING-BACKUP
9.	8C-4892 J	[1]	SEAL-HEAD
10.	6E-5702	[1]	HEAD
11.	130-3262	[1]	ROD AS
	4J-4955	[1]	SPACER (3X100X5-MM THK)
	9J-1175	[2]	BUSHING
12.	9X-8897	[2]	BOLT (1-8X0.42-IN)
13.	8H-5772	[6]	BOLT (1-8X3.75-IN)
14.	5P-8250	[8]	WASHER (28X49X5-MM THK)
15.	8T-4896	[8]	WASHER-HARD (10.2X18.5X2.5-MM THK)
16.	3B-8489	[2]	FITTING-GREASE (1/8-27 PTF)
17.	346-5196 CJ	[1]	SEAL-WIPER
18.	346-5200 CJ	[1]	SEAL-U-CUP
19.	167-2214 CJ	[1]	SEAL AS-BUFFER
20.	8T-3330 J	[1]	RING-WEAR
21.	1P-4577	[4]	FLANGE-HALF
22.	5S-7382	[8]	BOLT (3/8-16X1.375-IN)

			AVAILABLE REPAIR KIT(S):
	245-9840 J	[1]	KIT-SEAL (HYDRAULIC CYLINDER)
			(INCLUDES RINGS & SEALS)
	C		CHANGE FROM PREVIOUS TYPE
	J		KIT MARKED J SERVICE PART(S) MARKED J
	R		REMANUFACTURED PART MAY BE AVAILABLE

130-6381: CYLINDER GP-RIPPER

CYLINDER GP-RIPPER

130-6381 CYLINDER GP-RIPPER -TILT, LH
S/N GAZ1-UP
196.85-MM (7.75-IN.) BORE X 830-MM (32.7-IN.) STROKE
PART OF 4Z-0664 RIPPER AR

Parts for your D11R TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	130-6382	[1]	CYLINDER AS (LH)
	4J-4955	[1]	SPACER (3X100X5-MM THK)
	9J-1175	[2]	BUSHING
2.	4J-6888	[1]	LOCKNUT (2-3/4-12-THD)
3.	6E-5660	[2]	WASHER (71X120X8-MM THK)
4.	9J-5037 J	[1]	RING-WEAR
5.	8T-1792 J	[1]	SEAL AS
6.	6E-5701	[1]	PISTON
7.	5K-1787 J	[1]	SEAL-O-RING
8.	8J-0548 J	[1]	RING-BACKUP
9.	8C-4892 J	[1]	SEAL-HEAD
10.	6E-5702	[1]	HEAD
11.	130-3262	[1]	ROD AS
	4J-4955	[1]	SPACER (3X100X5-MM THK)
	9J-1175	[2]	BUSHING
12.	9X-8897	[2]	BOLT (1-8X0.42-IN)
13.	8H-5772	[6]	BOLT (1-8X3.75-IN)
14.	5P-8250	[8]	WASHER (28X49X5-MM THK)
15.	8T-4896	[8]	WASHER-HARD (10.2X18.5X2.5-MM THK)
16.	3B-8489	[2]	FITTING-GREASE (1/8-27 PTF)
17.	346-5196 CJ	[1]	SEAL-WIPER
18.	346-5200 J	[1]	SEAL-U-CUP
19.	167-2214 J	[1]	SEAL AS-BUFFER
20.	8T-3330 J	[1]	RING-WEAR
21.	1P-4577	[4]	FLANGE-HALF
22.	5S-7382	[8]	BOLT (3/8-16X1.375-IN)

			AVAILABLE REPAIR KIT(S):
	245-9840 J	[1]	KIT-SEAL (HYDRAULIC CYLINDER)
			(INCLUDES RINGS & SEALS)
	C		CHANGE FROM PREVIOUS TYPE
	J		KIT MARKED J SERVICE PART(S) MARKED J
	R		REMANUFACTURED PART MAY BE AVAILABLE

340-1877: CYLINDER GP-RIPPER

CYLINDER GP-RIPPER

340-1877 CYLINDER GP-RIPPER
S/N GAZ1-UP
254-MM (10-IN) BORE X 613-MM (24.1-IN) STROKE
PART OF 4Z-0664 RIPPER AR

Parts for your D11R TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3B-8489	[2]	FITTING-GREASE (1/8-27 PTF)
2.	3G-3903	[1]	WASHER (70.23X140X11.94-MM THK)
3.	4J-6888	[1]	LOCKNUT (2-3/4-12-THD)
4.	8T-6746 J	[1]	RING-WEAR
5.	102-0691	[1]	ROD AS
5A.	4J-4955	[1]	SPACER (3X100X5-MM THK)
5B.	9J-1175	[2]	BUSHING
6.	334-2648	[1]	HEAD
7.	340-1878	[1]	CYLINDER AS
7A.	4J-4955	[1]	SPACER (3X100X5-MM THK)
7B.	9J-1175	[2]	BUSHING
8.	102-0693 Y	[1]	PISTON GP-HYDRAULIC CYLINDER
9.	1P-4577	[4]	FLANGE-HALF
10.	1U-3307 J	[1]	RING-BACKUP
11.	311-9316 J	[1]	SEAL AS-BUFFER
12.	311-9317 J	[1]	SEAL-U-CUP
13.	311-9318 J	[1]	SEAL-WIPER
14.	3R-2300	[8]	BOLT (1-1/4-7X4.5-IN)
15.	4K-0684	[8]	WASHER-HARD (34X55X6-MM THK)
16.	5P-2235 J	[1]	SEAL-O-RING
17.	5S-7382	[8]	BOLT (3/8-16X1.375-IN)
18.	8C-3843 J	[1]	RING-WEAR
19.	8T-4896	[8]	WASHER-HARD (10.2X18.5X2.5-MM THK)

			AVAILABLE REPAIR KIT(S):
	246-0635 J	[1]	KIT-HYDRAULIC CYLINDER
			(INCLUDES RINGS, SEALS, & SEAL-O-RINGS)
	J		KIT MARKED J SERVICES PART(S) MARKED J
	R		REMANUFACTURED PART MAY BE AVAILABLE
	Y		SEPARATE ILLUSTRATION

194-7108: LINES GP-HYDRAULIC

LINES GP-HYDRAULIC

194-7108 LINES GP-HYDRAULIC -AUTO CARRY
S/N AAF1-201; 7PZ1-663
PART OF 209-9081 CONTROL AR-HYDRAULIC

Parts for your D11R TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	6V-1875	[1]	GROMMET (48-MM ID)
2.	6V-0852	[1]	CAP-DUST (DIVERTER VALVE)
3.	164-4536 Y	[1]	VALVE GP-DIVERTER (AUTO CARRY HYDRAULIC LINES)
4.	193-3158 I	[1]	HOSE AS
5.	193-3159 I	[1]	HOSE AS
6.	193-3160 I	[1]	HOSE AS
7.	193-3161 I	[1]	HOSE AS
8.	193-3162 I	[1]	HOSE AS
9.	193-3163 I	[1]	HOSE AS
10.	194-1636	[1]	BRACKET AS
	1F-0750	[1]	NUT-WELD (3/8-16-THD)
11.	148-8338	[1]	CONNECTOR AS
	3J-1907	[1]	SEAL-O-RING
	6V-8397	[1]	SEAL-O-RING
	8T-0075	[1]	CONNECTOR
12.	148-8367	[1]	ELBOW AS
	6V-8397	[1]	SEAL-O-RING
	6V-9850	[1]	ELBOW
13.	148-8378	[2]	ELBOW AS
			(EACH INCLUDES)
	3J-1907	[1]	SEAL-O-RING
	6V-8397	[1]	SEAL-O-RING
	6V-8724	[1]	ELBOW
14.	148-8435	[1]	TEE AS
	3J-1907	[1]	SEAL-O-RING
	6V-8397	[2]	SEAL-O-RING
	6V-8781	[1]	TEE
15.	8T-9377	[1]	BOLT (3/8-16X2.25-IN)
16.	164-5567	[1]	COUPLER AS-QUICK DISCONNECT (MALE)
	6V-3965	[1]	FITTING (QUICK DISCONNECT)
	3J-1907	[1]	SEAL-O-RING
17.	1P-3704	[2]	SEAL-RECTANGULAR
18.	1P-3705	[2]	SEAL-RECTANGULAR
19.	1P-4579	[4]	FLANGE-HALF
20.	1P-5767	[4]	FLANGE-HALF
21.	3E-8026	[1]	CLIP (SLOT)
22.	3E-8027	[1]	CLIP (TAB)
23.	3S-8664	[2]	CLIP
24.	4J-0524	[2]	SEAL-O-RING
25.	4L-6454	[1]	BOLT (3/8-16X1-IN)
26.	5P-2566	[1]	BOLT (1/2-13X1.5-IN)
27.	5P-7703	[1]	GROMMET (52-MM ID)
28.	5P-8077	[4]	FLANGE-HALF
29.	6V-1572	[1]	CLIP (SLOT)
30.	6V-1573	[1]	CLIP (TAB)
31.	7X-0334	[3]	BOLT (1/2-13X5-IN)
32.	8T-4122	[8]	WASHER-HARD (17X32X3.5-MM THK)
33.	8T-4223	[21]	WASHER-HARD (13.5X25.5X3-MM THK)
34.	8T-4835	[8]	BOLT (1/2-13X2-IN)
35.	8T-4896	[2]	WASHER-HARD (10.2X18.5X2.5-MM THK)
36.	8T-6871	[8]	BOLT (5/8-11X2.5-IN)
37.	8T-8917	[1]	BOLT (1/2-13X1.25-IN)
38.	8T-8919	[8]	BOLT (1/2-13X1.75-IN)

			***STANDARD REMOVALS***
	2J-2668 L	[1]	COVER-SHIPPING
	3J-1907 N	[1]	SEAL-O-RING
	4J-0524 L	[1]	SEAL-O-RING
	8T-2501 P	[1]	BOLT (3/8-16X2-IN)
	9S-8004 N	[1]	PLUG (9/16-18-THD)
	130-9456 QI	[1]	HOSE AS
	6V-9829 Q	[1]	CAP
	I		REFER TO HYDRAULIC INFORMATION SYSTEM
	L		PART OF STANDARD LINES GP - HYDRAULIC FAN
	N		PART OF STANDARD VALVE GP - PILOT
	P		PART OF STANDARD TORQUE CONVERTOR HOUSING
	Q		PART OF STANDARD LINES GP - PUMP
	Y		SEPARATE ILLUSTRATION

194-7108: LINES GP-HYDRAULIC

LINES GP-HYDRAULIC

194-7108 LINES GP-HYDRAULIC -AUTO CARRY
S/N AAF202-UP; 7PZ664-UP
PART OF 209-9081 CONTROL AR-HYDRAULIC

Parts for your D11R TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	6V-1875	[1]	GROMMET (48-MM ID)
2.	164-4536 Y	[1]	VALVE GP-DIVERTER (AUTO CARRY HYDRAULIC LINES)
3.	193-3158 I	[1]	HOSE AS
4.	193-3160 I	[1]	HOSE AS
5.	193-3161 I	[1]	HOSE AS
6.	193-3162 I	[1]	HOSE AS
7.	193-3163 I	[1]	HOSE AS
8.	194-1636	[1]	BRACKET AS
	1F-0750	[1]	NUT-WELD (3/8-16-THD)
9.	234-4419	[1]	TUBE AS
10.	235-2330 I	[1]	HOSE AS
11.	148-8338	[1]	CONNECTOR AS
	8T-0075	[1]	CONNECTOR
	3J-1907	[1]	SEAL-O-RING
	6V-8397	[1]	SEAL-O-RING
12.	148-8367	[1]	ELBOW AS
	6V-9850	[1]	ELBOW
	6V-8397	[1]	SEAL-O-RING
13.	148-8378	[2]	ELBOW AS
			(EACH INCLUDES)
	6V-8724	[1]	ELBOW
	3J-1907	[1]	SEAL-O-RING
	6V-8397	[1]	SEAL-O-RING
14.	148-8435	[1]	TEE AS
	6V-8781	[1]	TEE
	3J-1907	[1]	SEAL-O-RING
	6V-8397	[2]	SEAL-O-RING
15.	1P-3704	[2]	SEAL-RECTANGULAR
16.	1P-3705	[3]	SEAL-RECTANGULAR
17.	1P-4579	[4]	FLANGE-HALF
18.	1P-5767	[4]	FLANGE-HALF
19.	3E-8026	[1]	CLIP (SLOT)
20.	3E-8027	[1]	CLIP (TAB)
21.	3S-8664 C	[4]	CLIP
22.	4J-0524	[2]	SEAL-O-RING
23.	4L-6454	[1]	BOLT (3/8-16X1-IN)
24.	5P-2566	[1]	BOLT (1/2-13X1.5-IN)
25.	5P-7703	[1]	GROMMET (52-MM ID)
26.	5P-8077	[4]	FLANGE-HALF
27.	6V-1572	[1]	CLIP (SLOT)
28.	6V-1573	[1]	CLIP (TAB)
29.	6V-8801 C	[1]	NUT (3/8-16-THD)
30.	7X-0325	[4]	BOLT (1/2-13X2.5-IN)
31.	7X-0334	[3]	BOLT (1/2-13X5-IN)
32.	8T-2502 C	[1]	BOLT (3/8-16X1.125-IN)
33.	8T-4122	[8]	WASHER-HARD (17X32X3.5-MM THK)
34.	8T-4223	[25]	WASHER-HARD (13.5X25.5X3-MM THK)
35.	8T-4835	[8]	BOLT (1/2-13X2-IN)
36.	8T-4896 C	[4]	WASHER-HARD (10.2X18.5X2.5-MM THK)
37.	8T-6871	[8]	BOLT (5/8-11X2.5-IN)
38.	8T-8917	[1]	BOLT (1/2-13X1.25-IN)
39.	8T-8919	[8]	BOLT (1/2-13X1.75-IN)
40.	8T-9377	[1]	BOLT (3/8-16X2.25-IN)

			***STANDARD REMOVALS***
	2J-2668 L	[1]	COVER-SHIPPING
	3J-1907 N	[1]	SEAL-O-RING
	4J-0524 L	[1]	SEAL-O-RING
	8T-2501 P	[1]	BOLT (3/8-16X2-IN)
	9S-8004 N	[1]	PLUG (9/16-18-THD)
	130-9456 JI	[1]	HOSE AS
	6V-9829 J	[1]	CAP
	C		CHANGE FROM PREVIOUS TYPE
	I		REFER TO HYDRAULIC INFORMATION SYSTEM
	J		PART OF STANDARD LINES GP-PUMP
	L		PART OF STANDARD LINES GP - HYDRAULIC FAN
	N		PART OF STANDARD VALVE GP - PILOT
	P		PART OF STANDARD TORQUE CONVERTOR HOUSING
	Y		SEPARATE ILLUSTRATION

141-8376: LINES GP-RIPPER

LINES GP-RIPPER

141-8376 LINES GP-RIPPER
S/N GAZ1-UP
PART OF 4Z-0664 RIPPER AR

Parts for your D11R TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	9M-0164	[8]	CLAMP-HOSE
2.	139-2455	[2]	SHIELD
3.	139-2456	[2]	SHIELD
4.	141-7225 I	[2]	HOSE AS
5.	141-7226 I	[2]	HOSE AS
6.	141-7228 I	[2]	HOSE AS
7.	141-7230 I	[2]	HOSE AS
8.	147-6626	[8]	SHIELD
9.	151-5203	[4]	GROMMET
10.	4J-0520	[16]	SEAL-O-RING
11.	4L-9337	[8]	BOLT (3/8-16X1.5-IN)
12.	153-8462	[2]	CLIP (SLOT)
13.	153-8463	[2]	CLIP (TAB)
14.	5P-8444	[2]	GROMMET (37-MM ID)
15.	8T-4896	[4]	WASHER-HARD (10.2X18.5X2.5-MM THK)
16.	4L-6454	[4]	BOLT (3/8-16X1-IN)
	I		REFER TO HYDRAULIC INFORMATION SYSTEM

Information:

UNDERCARRIAGE

UNDERCARRIAGE GP

Special Instruction

Reconditioning of Bearing Surfaces and Pivot Shaft Ends {4153}
Reconditioning of Bearing Surfaces and Pivot Shaft Ends {4153}

Rebuild Guidelines for the Suspended Undercarriage {0599, 4150}
Rebuild Guidelines for the Suspended Undercarriage {0599, 4150}

Identification of Straight Undercarriage and Toe Out / Camber / Yaw Undercarriage{4150}
Identification of Straight Undercarriage and Toe Out / Camber / Yaw Undercarriage{4150}

Service Letter-NACD

PRODUCT SUPPORT PROGRAM FOR REWORKING THE 316-3369, 316-3370, AND 320-3543 TRACK LINK ASSEMBLIES FOR USE ON CERTAIN D11N, D11R, AND D11T TRACK-TYPE TRACTORS AT THE TIME OF INSTALLATION
PRODUCT SUPPORT PROGRAM FOR REWORKING THE 316-3369, 316-3370, AND 320-3543 TRACK LINK ASSEMBLIES FOR USE ON CERTAIN D11N, D11R, AND D11T TRACK-TYPE TRACTORS AT THE TIME OF INSTALLATION

Service Letter-Australia

Service Letter-CFEL

Service Letter-CSARL

Service Letter-Americas

Technical Information Bulletin

The Use of High-Pressure Water Sprays to Clean the Undercarriage Can Result in Damage to Undercarriage Components on Track Type Tractors, Track Type Loaders and Excavators
The Use of High-Pressure Water Sprays to Clean the Undercarriage Can Result in Damage to Undercarriage Components on Track Type Tractors, Track Type Loaders and Excavators

Tool Operating Manual

150T Track Repair Group Field Follow Tools, Operation, and Parts {0374, 0700, 0729, 4169, 4170, 4171}
150T Track Repair Group Field Follow Tools, Operation, and Parts {0374, 0700, 0729, 4169, 4170, 4171}

NEHS1249 100T Track Repair Group {0374, 0599, 0700, 0729, 4169, 4170}
NEHS1249 100T Track Repair Group {0374, 0599, 0700, 0729, 4169, 4170}

Service Letter-China

PRODUCT SUPPORT PROGRAM FOR REWORKING THE 316-3369, 316-3370, AND 320-3543 TRACK LINK ASSEMBLIES FOR USE ON CERTAIN D11N, D11R, AND D11T TRACK-TYPE TRACTORS AT THE TIME OF INSTALLATION
PRODUCT SUPPORT PROGRAM FOR REWORKING THE 316-3369, 316-3370, AND 320-3543 TRACK LINK ASSEMBLIES FOR USE ON CERTAIN D11N, D11R, AND D11T TRACK-TYPE TRACTORS AT THE TIME OF INSTALLATION

Service Letter-Asia

Systems Operation

Undercarriage
D11R Track-Type Tractor Power Train

Undercarriage Reconditioning Bulletin

Rebuild Guidelines for the Suspended Undercarriage {0599, 4150}
Rebuild Guidelines for the Suspended Undercarriage {0599, 4150}

Undercarriage Reconditioning Bulletin Contents {0374, 4150}
Undercarriage Reconditioning Bulletin Contents {0374, 4150}

Track, Track Roller, and Track Idler Cycle Times {4159, 4169, 4170, 4171, 4180}
Track, Track Roller, and Track Idler Cycle Times {4159, 4169, 4170, 4171, 4180}

Foreword {0374, 4150, 7000, 7590, 7950}
Foreword {0374, 4150, 7000, 7590, 7950}

Introduction {0374, 4150, 7000, 7590, 7950}
Introduction {0374, 4150, 7000, 7590, 7950}

Reconditioning Procedure for Seal Ramps on Inverted Style Idler and Roller Shafts {0729, 4150, 4154, 4159, 6433, 7561}
Reconditioning Procedure for Seal Ramps on Inverted Style Idler and Roller Shafts {0729, 4150, 4154, 4159, 6433, 7561}

Reusability Recommendations for Duo-Cone Seals {7555, 7561}
Reusability Recommendations for Duo-Cone Seals {7555, 7561}

Equipment and Tools for Undercarriage Rebuilding and Reconditioning Stations {0729, 4150}
Equipment and Tools for Undercarriage Rebuilding and Reconditioning Stations {0729, 4150}

Training Materials {0314, 0374, 4150}
Training Materials {0314, 0374, 4150}

Facility and Equipment Layouts {4150}
Facility and Equipment Layouts {4150}

Disassembly and Assembly Procedures for Track Rollers with Inverted Duo-Cone Seals {0599, 0729, 4180, 4180, 7555, 7561}
Disassembly and Assembly Procedures for Track Rollers with Inverted Duo-Cone Seals {0599, 0729, 4180, 4180, 7555, 7561}

Procedure and Guidelines for Cleaning Phosphate Coated Track Pins {4169, 4171, 7950}
Procedure and Guidelines for Cleaning Phosphate Coated Track Pins {4169, 4171, 7950}

Nitrogen Pressure Test Unit <NOBR>FT2724</NOBR> {4150, 4159, 4169, 4170, 4171, 4174, 4175, 4180}
Nitrogen Pressure Test Unit FT2724 {4150, 4159, 4169, 4170, 4171, 4174, 4175, 4180}

Reusability Guidelines for Single Tooth Master Links {0729, 4150, 4169, 4171}
Reusability Guidelines for Single Tooth Master Links {0729, 4150, 4169, 4171}

Reuse And Salvage Guidelines

Facility and Equipment Layouts {4150}
Facility and Equipment Layouts {4150}

Information Release Memo

D11T CAMBER-ONLY UNDERCARRIAGE
D11T CAMBER-ONLY UNDERCARRIAGE

Service Letter-APD

PRODUCT SUPPORT PROGRAM FOR REWORKING THE 316-3369, 316-3370, AND 320-3543 TRACK LINK ASSEMBLIES FOR USE ON CERTAIN D11N, D11R, AND D11T TRACK-TYPE TRACTORS AT THE TIME OF INSTALLATION
PRODUCT SUPPORT PROGRAM FOR REWORKING THE 316-3369, 316-3370, AND 320-3543 TRACK LINK ASSEMBLIES FOR USE ON CERTAIN D11N, D11R, AND D11T TRACK-TYPE TRACTORS AT THE TIME OF INSTALLATION

Service Magazine

Improved Track Press Tools are Available for Positive Pin Retention Track {4150}
2002/07/01

Large Special Taps with Spiralock Threads Provide Improved Bolt Retention {4150, 4151, 4192}
2004/07/19

Advantages and Disadvantages of Carrier Roller Use on D8-D11 Track-Type Tractors {4154, 4180}
Advantages and Disadvantages of Carrier Roller Use on D8-D11 Track-Type Tractors {4154, 4180}

Caterpillar Parts SIS Catalog D11R :

Truck sale:

Caterpillar D11R
- Crawler dozers
CLEVELAND BROTHERS EQUIPMENT COMPANY INC

1,600,000

Caterpillar D11R REBUILD, Crawler dozers, Construction
- Crawler dozers
CARTER MACHINERY COMPANY, INC.

399,000

Caterpillar D11R, Crawler dozers, Construction
- Crawler dozers
HOLT OF CALIFORNIA

1.220.000

Caterpillar D11R, Rupsdozers, Bouw

CATERPILLAR FINANCIAL SERVICES CORPORATION

Caterpillar D11R, Rupsdozers, Bouw
- Crawler dozers
FINNING CANADA