AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

228-7910 WIRING GP-CAB -CUSTOM PART OF 219-5156 CAB AR-ENCLOSED ROPS 826G II LANDFILL COMPACTOR


ELECTRICAL AND STARTING SYSTEM
WIRING GP
OPERATOR STATION
CONTROL GP-STIC
FRAME AND BODY
FRAME GP
BRAKING SYSTEM
CONTROL GP
BRAKE GP

LANDFILL COMPACTOR 826G II LANDFILL COMPACTOR AYH
 2Q-8040 Steering Arrangement-Stic Custom Product Support Literature for the 826G Series II Landfill Compactor AYH00001-UP (MACHINE) SEBC1366 826G II AYH   (1998)

ELECTRICAL AND STARTING SYSTEM

WIRING GP
WIRING GP-CAB
228-7910 WIRING GP-CAB
 

#SEBC13660010
 

228-7910: WIRING GP-CAB

228-7910 WIRING GP-CAB -CUSTOM
PART OF 219-5156 CAB AR-ENCLOSED ROPS
i01881470 SEBC1366
2287910 WIRING GP-CAB Parts scheme 2287910 WIRING GP-CAB Parts scheme
  For full view, you need register

Parts for your 826G II LANDFILL COMPACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [13] STRAP-CABLE  
2. 4V-4164 [8] BUSHING-TERMINAL  
3. 6I-1418 [8] SPACER (8.2X12.7X28.7MM THK)  
4. 6Y-6584 [1] STRAP AS-GROUND  
5. 7K-1181 [15] STRAP-CABLE  
6. 8T-9655 [16] MOUNT (ISOLATION)  
7. 9F-8125 [8] LOCKWASHER  
8. 098-8968 [8] WASHER (5X16X1.2MM THK)  
9. 122-4429 [1] PLATE  
10. 122-9854 [1] GASKET  
11. 123-2896 [1] GASKET  
12. 123-4627 [1] GASKET  
13. 123-4628 [2] PLATE  
14. 172-9389 Y [1] CONTROL GP-UNPROGRAMMED (POWERTRAIN)  
15. 172-9391 Y [1] CONTROL GP-UNPROGRAMMED (IMPLEMENT)  
16. 199-9724 [1] PLATE  
17. 228-9593 [1] HARNESS AS-CAB  
  102-8802 [1] KIT-RECEPTACLE (2 PIN)  
  102-8803 [1] KIT-RECEPTACLE (3 PIN)  
  102-8804 [1] KIT-RECEPTACLE (4 PIN)  
  102-8806 [2] KIT-RECEPTACLE (8 PIN)  
  102-8801 [1] KIT-RECEPTACLE (12 PIN)  
    (EACH KIT INCLUDES RECEPTACLE AS AND WEDGE)
  110-6846 [2] PLUG AS-CONNECTOR (40 PIN)  
  3E-7996 [6] PLUG-CONNECTOR (6 PIN)  
  3T-3410 [1] RECEPTACLE AS (37 PIN)  
  8N-1522 [1] NUT (2 1/4-16 THD)  
  7G-7917 [3] PLUG-SEAL  
  7G-7918 [1] PLUG-SEAL  
  7G-7919 [2] PLUG-SEAL  
  8N-1513 [1] RECEPTACLE AS (37 PIN)  
  8N-1522 [1] NUT (2 1/4-16 THD)  
  8N-1519 [1] RECEPTACLE AS (12 PIN)  
  8N-1522 [1] NUT (2 1/4-16 THD)  
  8N-1521 [3] BELL AS-END  
  8T-8737 [135] PLUG-SEAL  
  8T-9834 [1] PLUG AS-CONNECTOR (40 PIN)  
  3E-4367 [1] RING-RETAINING  
  3E-8557 M [1] BOLT (M5X0.8X39.37MM)  
  9X-1339 [1] RECEPTACLE AS (40 PIN)  
  9X-7146 [1] PLUG AS-CONNECTOR (24 PIN)  
  3E-4367 [1] RING-RETAINING  
  3E-8558 M [1] BOLT  
  9X-3265 [2] SEAL-CONNECTOR  
  155-2255 [2] KIT-CONNECTING PLUG (12 PIN)  
  155-2265 [4] KIT-CONNECTING PLUG (8 PIN)  
  155-2260 [5] KIT-CONNECTING PLUG (3 PIN)  
  155-2269 [1] PLUG AS-CONNECTOR (2 PIN)  
  155-2271 [1] KIT-CONNECTING PLUG (4 PIN)  
  155-2274 [3] KIT-CONNECTING PLUG (6 PIN)  
    (EACH KIT INCLUDES PLUG AS AND WEDGE)
18. 099-3649 M [8] BOLT (M8X1.25X40MM)  
19. 2S-1647 [1] GROMMET  
20. 4B-2049 [8] NUT (10-32 THD)  
21. 4P-7429 [1] CLIP  
22. 4P-8134 [2] CLIP  
23. 6D-6146 [4] SCREW-MACHINE (10-32X1.25)  
24. 8T-4138 M [12] BOLT (M6X1X20MM)  
25. 8T-4205 [12] WASHER-HARD (7.2X14.5X2MM THK)  
26. 8T-4223 [1] WASHER-HARD (13.5X25.5X3MM THK)  
27. 8T-4244 M [1] NUT (M12X1.75 THD)  
28. 9M-5870 [4] GROMMET (11.11MM ID)  
29. 9N-0869 [8] WASHER-HARD (8.8X25.5X2.0MM THK)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBC13660011
 

4E-8413: CONTROL GP-STIC

4E-8413 CONTROL GP-STIC
PART OF 219-5156 CAB AR-ENCLOSED ROPS
i01220908 SEBC1366
4E8413 CONTROL GP-STIC Parts scheme
  For full view, you need register

Parts for your 826G II LANDFILL COMPACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 177-4113 Y [1] CONTROL GP-STIC  
2. 8T-4138 M [4] BOLT (M6X1.0X20MM)  
3. 4E-7520 [1] BASE  
4. 8T-0723 M [2] SETSCREW-SOCKET  
5. [1] WIRE-ELECTRICAL  
6. 4E-7628 [1] COVER  
7. 8T-0269 M [4] BOLT-SOCKET HEAD (M6X1X20MM)  
8. 4E-7627 [1] HOUSING  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBC13660012
 

177-4113: CONTROL GP-STIC

177-4113 CONTROL GP-STIC
PART OF 4E-8413 CONTROL GP-STIC
i01169050 SEBC1366
1774113 CONTROL GP-STIC Parts scheme
  For full view, you need register

Parts for your 826G II LANDFILL COMPACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 160-3518 [1] KIT-RECEPTACLE (8 PIN)  
2. 177-4112 [1] CAP AS  
2A. 177-2374 [1] SWITCH AS-ROCKER (TRANSMISSION DIRECTION)  
  5S-4246 [2] LOCKWASHER  
  8T-8729 [3] PIN-CONNECTOR  
  9X-8917 [2] SCREW-MACHINE (4-40X9.52MM)  
  096-5962 [2] WASHER-HARD (3.4X7X0.8MM THK)  
  105-8029 [1] ACTUATOR  
2B. [1] SWITCH AS (TRANSMISSION UPSHIFT)  
2C. 159-8665 [1] SWITCH AS (TRANSMISSION DOWNSHIFT)  
    (EACH SWITCH AS INCLUDES)
  3K-0835 [1] NUT (5/8-24 THD)  
  6F-0253 [1] LOCKWASHER  
  8T-8729 [2] PIN-CONNECTOR  
3. 3E-3389 [1] WEDGE-RECEPTACLE LOCK  
4. [1] GRIP  
5. 7Y-3173 M [2] SCREW-BUTTON HEAD (M4X0.7X12MM)  
6. 8C-7508 [2] LOCKWASHER  
7. 8C-9660 [2] WASHER (4.6X7.9X0.8MM THK)  
  M   METRIC PART
 

#SEBC13660013
 

187-0738: LOCK GP-STIC CONTROL

187-0738 LOCK GP-STIC CONTROL
PART OF 219-5156 CAB AR-ENCLOSED ROPS
i01270854 SEBC1366
1870738 LOCK GP-STIC CONTROL Parts scheme
  For full view, you need register

Parts for your 826G II LANDFILL COMPACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2V-4387 [1] SPACER (.406X1X.91 IN THK)  
2. 3S-2093 [1] STRAP-CABLE  
3. 4E-8557 [1] SHAFT AS  
4. 4E-8561 [1] CAM  
5. 188-2048 [1] KNOB  
6. 6L-8598 [2] RING-RETAINING  
7. 8C-3442 [1] SPRING-COIL  
8. 144-7766 [1] LEVER AS-STIC STEER LOCK  
9. 145-8951 [1] PLATE AS  
10. 145-8952 [1] PLATE AS  
  3E-6908 M [2] STUD-WELD (M8X1.25X20MM)  
11. 151-6427 [2] BEARING  
12. 190-4764 [1] GUARD AS  
  6V-9632 M [1] NUT-WELD (M6X1 THD)  
13. 204-3611 [1] PLATE AS  
  6V-9632 M [4] NUT-WELD (M6X1 THD)  
14. 171-3759 [1] SWITCH AS-LIMIT (STIC CONTROL LOCK)  
  102-8804 [1] KIT-RECEPTACLE (4 PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  9G-3695 [1] PLUG (GROMMET SEALING)  
  9X-3401 [3] PIN-CONNECTOR  
  6V-1614 BD TUBE-SHRINKABLE  
  5P-5677 BD WIRE (18 GA)  
  9X-1386 BE SLEEVE  
  125-7874 BE TUBE-SHRINKABLE  
  126-1767 [1] CONNECTOR-PIN  
15. 1P-7326 [2] WASHER  
16. 4D-7794 [1] CLIP  
17. 4E-8560 [2] KEY-SQUARE  
18. 5C-7261 M [2] NUT (M8X1.25 THD)  
19. 5C-7423 M [4] SCREW (M6X1X16MM)  
20. 5C-9553 M [2] BOLT (M6X1X16MM)  
21. 6V-5220 M [2] BOLT (M8X1.25X65MM)  
22. 6V-9505 M [2] SCREW-MACHINE (M6X1X20MM)  
23. 8T-4133 M [3] NUT (M10X1.5 THD)  
24. 8T-4177 M [1] BOLT (M8X1.25X90MM)  
25. 8T-4224 [6] WASHER-HARD (8.8X16X2MM THK)  
  B   USE AS REQUIRED
  D   ORDER BY THE METER
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

#SEBC13660014
 

219-5149: HARDWARE GP-REAR FRAME

219-5149 HARDWARE GP-REAR FRAME -CUSTOM
PART OF 2Q-8040 STEERING AR-STIC
i01880527 SEBC1366
2195149 HARDWARE GP-REAR FRAME Parts scheme
  For full view, you need register

Parts for your 826G II LANDFILL COMPACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. [2] BLOCK  
2. 9C-6809 [2] BLOCK  
 

#SEBC13660015
 

180-4003: BASE GP-FOOT BRAKE

180-4003 BASE GP-FOOT BRAKE -RH PEDAL
PART OF 180-4002 CONTROL GP-FOOT BRAKE
i01297567 SEBC1366
1804003 BASE GP-FOOT BRAKE Parts scheme
  For full view, you need register

Parts for your 826G II LANDFILL COMPACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4E-9664 [1] PIN  
2. 5M-6755 [3] SCREW-MACHINE (NO10X.562 IN)  
3. 8S-2225 [1] SEAL-LIP  
4. 009-3101 [1] RING-RETAINING  
5. 112-2276 [1] HARNESS AS-BRAKE (RIGHT FOOT BRAKE BASE)  
  127-4988 [1] SWITCH AS-LIMIT (SINGLE POLE)(THROTTLE LOCK DEACTIVATION)  
    (RIGHT BRAKE PEDAL)
  155-2260 [1] KIT-CONNECTING PLUG (3 PIN)  
  124-5811 [1] GROMMET AS  
6. 113-7752 [1] PEDAL-BRAKE  
7. 115-2247 [1] SPRING  
8. 125-3295 M [2] SCREW-PAN HEAD (M2.5X0.45X12MM)  
9. 128-0606 [1] COVER  
10. 128-0607 [1] SEAL  
11. 146-1891 [1] SHAFT AS  
  1H-4393 [1] LOCKWASHER  
  6V-6718 [1] SCREW-WASHER HEAD  
  009-3101 [1] RING-RETAINING  
  146-1890 [1] PIN  
12. 148-5581 [1] INSULATOR  
13. 153-6273 M [1] SETSCREW  
14. 163-3926 [1] ROLLER  
  M   METRIC PART
 

#SEBC13660016
 

180-4004: BASE GP-FOOT BRAKE

180-4004 BASE GP-FOOT BRAKE -LH PEDAL
PART OF 180-4002 CONTROL GP-FOOT BRAKE
i01297571 SEBC1366
1804004 BASE GP-FOOT BRAKE Parts scheme
  For full view, you need register

Parts for your 826G II LANDFILL COMPACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3J-7354 [1] SEAL-O-RING  
2. 4E-9664 [1] PIN  
3. 5M-6755 [6] SCREW-MACHINE (NO10X.562 IN)  
4. 6V-2313 M [2] BOLT (M5X0.8X30MM)  
5. 8S-2225 [1] SEAL-LIP  
6. 8T-2899 M [2] SCREW-MACHINE (M2.5X0.45X6)  
7. 009-3101 [3] RING-RETAINING  
8. 105-6117 [1] SWITCH AS-LIMIT (STOP LIGHT)  
9. 113-7752 [1] PEDAL-BRAKE  
10. 125-3295 M [2] SCREW-PAN HEAD (M2.5X0.45X12MM)  
11. 205-3583 [1] PIN  
12. 146-1892 [1] HARNESS AS-BRAKE (STOP LIGHT)(LEFT FOOT BRAKE BASE)  
  155-2270 [1] KIT-CONNECTING PLUG (2 PIN)  
13. 146-1893 [1] COVER  
14. 146-2598 [1] SEAL  
15. 214-4863 Y [1] SENSOR GP-POSITION (ROTARY)(DECELERATOR)  
    (LEFT BRAKE PEDAL)
16. 149-4925 [1] ROLLER  
17. 153-6273 M [1] SETSCREW  
18. 161-0022 [1] SWITCH AS-ADJUSTABLE (STOP LIGHT LIMIT)  
19. 167-4348 [1] SPRING  
20. 187-2108 [1] TERMINAL  
21. 4B-4274 [2] WASHER (5.5X13X1.2MM THK)  
22. 9S-8002 [1] PLUG  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBC13660017
 

169-8257: CONTROL GP-FOOT BRAKE

169-8257 CONTROL GP-FOOT BRAKE
PART OF 219-5156 CAB AR-ENCLOSED ROPS
i01297554 SEBC1366
1698257 CONTROL GP-FOOT BRAKE Parts scheme
  For full view, you need register

Parts for your 826G II LANDFILL COMPACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 180-4002 Y [1] CONTROL GP-FOOT BRAKE  
2. 099-3649 M [6] BOLT (M8X1.25X40MM)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBC13660018
 

180-4002: CONTROL GP-FOOT BRAKE

180-4002 CONTROL GP-FOOT BRAKE
PART OF 169-8257 CONTROL GP-FOOT BRAKE
i01297565 SEBC1366
1804002 CONTROL GP-FOOT BRAKE Parts scheme
  For full view, you need register

Parts for your 826G II LANDFILL COMPACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 180-3994 [1] SHAFT AS  
1A. 4E-9667 [1] ROLLER  
1B. 4E-9668 [1] PIN  
1C. 009-3101 [1] RING-RETAINING  
1D. 114-9491 [2] WASHER  
2. 180-4003 Y [1] BASE GP-FOOT BRAKE (RH PEDAL)  
3. 180-4004 Y [1] BASE GP-FOOT BRAKE (LH PEDAL)  
  Y   SEPARATE ILLUSTRATION
 

#SEBC13660019
 

109-8193: CONTROL GP-PARKING BRAKE

109-8193 CONTROL GP-PARKING BRAKE
PART OF 219-5156 CAB AR-ENCLOSED ROPS
i01395380 SEBC1366
1098193 CONTROL GP-PARKING BRAKE Parts scheme
  For full view, you need register

Parts for your 826G II LANDFILL COMPACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 113-4659 [1] GROMMET  
2. 115-3030 [1] CABLE AS-PARKING BRAKE CONTROL  
3. 122-1671 [1] KNOB  
4. 5C-2890 M [1] NUT (M6X1 THD)  
  M   METRIC PART
 

Information:

Engine News
270-5051 Repair Kit (Electrical Connectors) Available for Repairs to Wiring Harnesses with Ampseal 16 and A4E 2 Connectors {0709, 1408}
2006/03/20
Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2010/05/13
Operation and Maintenance Manual
Battery or Battery Cable - Inspect/Replace
826G Series II Landfill Compactor, 825G Series II Soil Compactor and 824G Series II Wheel Dozer
Battery Disconnect Switch
826G Series II Landfill Compactor, 825G Series II Soil Compactor and 824G Series II Wheel Dozer
Circuit Breakers - Reset
826G Series II Landfill Compactor, 825G Series II Soil Compactor and 824G Series II Wheel Dozer
Fuses - Replace
826G Series II Landfill Compactor, 825G Series II Soil Compactor and 824G Series II Wheel Dozer
Special Instruction
Cross-Reference for Electrical Connectors {7553}
Cross-Reference for Electrical Connectors {7553}
Circuit Breaker Harness Assembly {1420}
Circuit Breaker Harness Assembly {1420}
Installation Procedure for 257-4183 Injector Wiring Harness Kit {1408}
Installation Procedure for 257-4183 Injector Wiring Harness Kit {1408}
Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}
Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}
Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}
Selecting Correct Part Numbers For Sensors and Adapter Harnesses for Certain Machines and Engines{1408, 1439}
Selecting Correct Part Numbers For Sensors and Adapter Harnesses for Certain Machines and Engines{1408, 1439}
Repair Procedure for Damaged Harness Wiring {1408}
Repair Procedure for Damaged Harness Wiring {1408}
Installation Procedure for Product Link PL421 Retrofit{7606}
Installation Procedure for Product Link PL421 Retrofit{7606}
Installation of Seat Belt Reminder Systems {1408, 1901, 1902, 7327, 7602, 7606, 7610, 7620}
Installation of Seat Belt Reminder Systems {1408, 1901, 1902, 7327, 7602, 7606, 7610, 7620}
Installation Procedure for the 192-7805 Seat Compressor Harness{1408, 7312, 7324}
Installation Procedure for the 192-7805 Seat Compressor Harness{1408, 7312, 7324}
DRCP Connector Repair Service Instruction {1408, 7553}
DRCP Connector Repair Service Instruction {1408, 7553}
Service Letter-NACD
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE POSITIVE BATTERY CABLE ON CERTAIN 826G AND 826G SERIES II LANDFILL COMPACTORS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE POSITIVE BATTERY CABLE ON CERTAIN 826G AND 826G SERIES II LANDFILL COMPACTORS
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Technical Information Bulletin
Error Codes for the Transmission Output Speed Sensors May Be Logged{3030, 3175, 7610, 7620}
Error Codes for the Transmission Output Speed Sensors May Be Logged{3030, 3175, 7610, 7620}
Cylinder Sensor Systematic (PSC) Issue{1905, 1911, 430S, 5102, 5104, 5736}
Cylinder Sensor Systematic (PSC) Issue{1905, 1911, 430S, 5102, 5104, 5736}
Specifications
Pressure Switch (Service Brake Oil)
824G Series II Wheel Tractor, 825G Series II Soil Compactor and 826G Series II Landfill Compactor Braking System
Temperature Sensor (Torque Converter Oil)
824G Series II Wheel Dozer, 825G Series II Soil Compactor and 826G Series II Landfill Compactor Power Train
Electrical Ground Stud
3406E and 3456 Engines for Caterpillar Built Machines
Temperature Sensor (Transmission Lubrication Oil)
824G Series II Wheel Dozer, 825G Series II Soil Compactor and 826G Series II Landfill Compactor Power Train
Temperature Sensor (Transmission Oil)
824G Series II Wheel Dozer, 825G Series II Soil Compactor and 826G Series II Landfill Compactor Power Train
Bypass Switch (Power Train Oil Filter)
824G Series II Wheel Dozer, 825G Series II Soil Compactor and 826G Series II Landfill Compactor Power Train
Temperature Sensor (Hydraulic Oil)
824G Series II Wheel Tractor, 825G Series II Soil Compactor and 826G Series II Landfill Compactor Electrohydraulic System
Pressure Switch (Parking Brake Oil)
824G Series II Wheel Tractor, 825G Series II Soil Compactor and 826G Series II Landfill Compactor Braking System
Tool Operating Manual
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Service Letter-China
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE POSITIVE BATTERY CABLE ON CERTAIN 826G AND 826G SERIES II LANDFILL COMPACTORS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE POSITIVE BATTERY CABLE ON CERTAIN 826G AND 826G SERIES II LANDFILL COMPACTORS
Service Letter-Asia
Systems Operation
Start Relay
824G Series II Wheel Tractor, 825G Series II Soil Compactor and 826G Series II Landfill Compactor Power Train
Sensors
824G Series II Wheel Tractor, 825G Series II Soil Compactor and 826G Series II Landfill Compactor Power Train
Switches
824G Series II Wheel Tractor, 825G Series II Soil Compactor and 826G Series II Landfill Compactor Power Train
Switches
824G Series II Wheel Dozer, 825G Series II
Soil Compactor and 826G Series II
Landfill Compactor Electrohydraulic System
Sensors
824G Series II Wheel Dozer, 825G Series II
Soil Compactor and 826G Series II
Landfill Compactor Electrohydraulic System
Sensors
Payload Control System (PCS) 2.X
Pressure Switch (Refrigerant)
Air Conditioning and Heating R134a for All Caterpillar Machines
Reuse And Salvage Guidelines
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Service Letter-APD
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE POSITIVE BATTERY CABLE ON CERTAIN 826G AND 826G SERIES II LANDFILL COMPACTORS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE POSITIVE BATTERY CABLE ON CERTAIN 826G AND 826G SERIES II LANDFILL COMPACTORS
Testing and Adjusting
Speed Sensor - Adjust
826G Series II Landfill Compactor, 825G Series II Soil Compactor and 824G Series II Wheel Dozer
Electric Starting System - Test
3406E and 3456 Engines for Caterpillar Built Machines
Electrical Connector - Inspect
824G Series II Wheel Dozer, 825G Series II
Soil Compactor and 826G Series II
Landfill Compactor Electrohydraulic System
Wiring Harness (Open Circuit) - Test
824G Series II Wheel Dozer, 825G Series II
Soil Compactor and 826G Series II
Landfill Compactor Electrohydraulic System
Wiring Harness (Short Circuit) - Test
Payload Control System (PCS) 2.X
System Schematic
826G Series II Landfill Compactor, 825G Series II Soil Compactor and 824G Series II Wheel Dozer
Electrical Connector - Inspect
Payload Control System (PCS) 2.X
System Schematic
824G Series II Wheel Dozer, 825G Series II
Soil Compactor and 826G Series II
Landfill Compactor Electrohydraulic System
Payload Electronic Control Module - Replace
Payload Control System (PCS) 2.X
Position Sensor (Lift Linkage) - Adjust
Payload Control System (PCS) 2.X
Battery (Internal Backup) - Replace
Payload Control System (PCS) 2.X
Glossary of Electrical Terms
Payload Control System (PCS) 2.X
System Schematic
Payload Control System (PCS) 2.X
Troubleshooting
CID 0545 FMI 05 Ether Start Relay open/short to +batt
3176C, 3406E and 3456 Engines for 816F, 826G Series II, and 836G Landfill Compactors, 815F and 825G Series II Soil Compactors, 814F, 824G Series II, and 834G Wheel Dozers, and for the 988G Wheel Loader
CID 0291 FMI 05 Engine Cooling Fan Solenoid open circuit
3176C, 3406E and 3456 Engines for 816F, 826G Series II, and 836G Landfill Compactors, 815F and 825G Series II Soil Compactors, 814F, 824G Series II, and 834G Wheel Dozers, and for the 988G Wheel Loader
CID 0291 FMI 06 Engine Cooling Fan Solenoid short to ground
3176C, 3406E and 3456 Engines for 816F, 826G Series II, and 836G Landfill Compactors, 815F and 825G Series II Soil Compactors, 814F, 824G Series II, and 834G Wheel Dozers, and for the 988G Wheel Loader
CID 0545 FMI 06 Ether Start Relay short to ground
3176C, 3406E and 3456 Engines for 816F, 826G Series II, and 836G Landfill Compactors, 815F and 825G Series II Soil Compactors, 814F, 824G Series II, and 834G Wheel Dozers, and for the 988G Wheel Loader
Electrical Connectors - Inspect
3176C, 3406E and 3456 Engines for 816F, 826G Series II, and 836G Landfill Compactors, 815F and 825G Series II Soil Compactors, 814F, 824G Series II, and 834G Wheel Dozers, and for the 988G Wheel Loader
CID 0100 FMI 03 Engine Oil Pressure open/short to +batt
3176C, 3406E and 3456 Engines for 816F, 826G Series II, and 836G Landfill Compactors, 815F and 825G Series II Soil Compactors, 814F, 824G Series II, and 834G Wheel Dozers, and for the 988G Wheel Loader
CID 0100 FMI 04 Engine Oil Pressure short to ground
3176C, 3406E and 3456 Engines for 816F, 826G Series II, and 836G Landfill Compactors, 815F and 825G Series II Soil Compactors, 814F, 824G Series II, and 834G Wheel Dozers, and for the 988G Wheel Loader
CID 0172 FMI 03 Intake Manifold Air Temp open/short to +batt
3176C, 3406E and 3456 Engines for 816F, 826G Series II, and 836G Landfill Compactors, 815F and 825G Series II Soil Compactors, 814F, 824G Series II, and 834G Wheel Dozers, and for the 988G Wheel Loader
CID 0172 FMI 04 Intake Manifold Air Temp short to ground
3176C, 3406E and 3456 Engines for 816F, 826G Series II, and 836G Landfill Compactors, 815F and 825G Series II Soil Compactors, 814F, 824G Series II, and 834G Wheel Dozers, and for the 988G Wheel Loader
CID 0174 FMI 03 Fuel Temperature open/short to +batt
3176C, 3406E and 3456 Engines for 816F, 826G Series II, and 836G Landfill Compactors, 815F and 825G Series II Soil Compactors, 814F, 824G Series II, and 834G Wheel Dozers, and for the 988G Wheel Loader
CID 0174 FMI 04 Fuel Temperature short to ground
3176C, 3406E and 3456 Engines for 816F, 826G Series II, and 836G Landfill Compactors, 815F and 825G Series II Soil Compactors, 814F, 824G Series II, and 834G Wheel Dozers, and for the 988G Wheel Loader
CID 0262 FMI 04 5 Volt Sensor DC Power Supply short to ground
3176C, 3406E and 3456 Engines for 816F, 826G Series II, and 836G Landfill Compactors, 815F and 825G Series II Soil Compactors, 814F, 824G Series II, and 834G Wheel Dozers, and for the 988G Wheel Loader
CID 0273 FMI 03 Turbo Outlet Pressure open/short to +batt
3176C, 3406E and 3456 Engines for 816F, 826G Series II, and 836G Landfill Compactors, 815F and 825G Series II Soil Compactors, 814F, 824G Series II, and 834G Wheel Dozers, and for the 988G Wheel Loader
CID 0273 FMI 04 Turbo Outlet Pressure short to ground
3176C, 3406E and 3456 Engines for 816F, 826G Series II, and 836G Landfill Compactors, 815F and 825G Series II Soil Compactors, 814F, 824G Series II, and 834G Wheel Dozers, and for the 988G Wheel Loader
CID 0274 FMI 03 Atmospheric Pressure open/short to +batt
3176C, 3406E and 3456 Engines for 816F, 826G Series II, and 836G Landfill Compactors, 815F and 825G Series II Soil Compactors, 814F, 824G Series II, and 834G Wheel Dozers, and for the 988G Wheel Loader
CID 0274 FMI 04 Atmospheric Pressure short to ground
3176C, 3406E and 3456 Engines for 816F, 826G Series II, and 836G Landfill Compactors, 815F and 825G Series II Soil Compactors, 814F, 824G Series II, and 834G Wheel Dozers, and for the 988G Wheel Loader
Throttle Position Sensor Circuit - Test
3176C, 3406E and 3456 Engines for 816F, 826G Series II, and 836G Landfill Compactors, 815F and 825G Series II Soil Compactors, 814F, 824G Series II, and 834G Wheel Dozers, and for the 988G Wheel Loader
Digital Sensor Supply Circuit - Test
3176C, 3406E and 3456 Engines for 816F, 826G Series II, and 836G Landfill Compactors, 815F and 825G Series II Soil Compactors, 814F, 824G Series II, and 834G Wheel Dozers, and for the 988G Wheel Loader
CID 0091 FMI 08 Throttle Position signal abnormal
3176C, 3406E and 3456 Engines for 816F, 826G Series II, and 836G Landfill Compactors, 815F and 825G Series II Soil Compactors, 814F, 824G Series II, and 834G Wheel Dozers, and for the 988G Wheel Loader
CID 0110 FMI 03 Engine Coolant Temperature open/short to +batt
3176C, 3406E and 3456 Engines for 816F, 826G Series II, and 836G Landfill Compactors, 815F and 825G Series II Soil Compactors, 814F, 824G Series II, and 834G Wheel Dozers, and for the 988G Wheel Loader
CID 0110 FMI 04 Engine Coolant Temperature short to ground
3176C, 3406E and 3456 Engines for 816F, 826G Series II, and 836G Landfill Compactors, 815F and 825G Series II Soil Compactors, 814F, 824G Series II, and 834G Wheel Dozers, and for the 988G Wheel Loader
CID 0267 FMI 02 Incorrect Engine Shutdown Switch inputs
3176C, 3406E and 3456 Engines for 816F, 826G Series II, and 836G Landfill Compactors, 815F and 825G Series II Soil Compactors, 814F, 824G Series II, and 834G Wheel Dozers, and for the 988G Wheel Loader
Connector Locations
826G Series II Landfill Compactor, 825G Series II Soil Compactor and 824G Series II Wheel Dozer
CID 0190 FMI 11 Engine Speed Sensor mechanical failure
3176C, 3406E and 3456 Engines for 816F, 826G Series II, and 836G Landfill Compactors, 815F and 825G Series II Soil Compactors, 814F, 824G Series II, and 834G Wheel Dozers, and for the 988G Wheel Loader
CID 0342 FMI 11 Secondary Engine Speed Sensor mechanical failure
3176C, 3406E and 3456 Engines for 816F, 826G Series II, and 836G Landfill Compactors, 815F and 825G Series II Soil Compactors, 814F, 824G Series II, and 834G Wheel Dozers, and for the 988G Wheel Loader
Engine Pressure Sensor Open or Short Circuit - Test
3176C, 3406E and 3456 Engines for 816F, 826G Series II, and 836G Landfill Compactors, 815F and 825G Series II Soil Compactors, 814F, 824G Series II, and 834G Wheel Dozers, and for the 988G Wheel Loader
CID 1582 FMI 03 Trans Lube Oil Temp Sensor open/short to +batt
3176C, 3406E and 3456 Engines for 816F, 826G Series II, and 836G Landfill Compactors, 815F and 825G Series II Soil Compactors, 814F, 824G Series II, and 834G Wheel Dozers, and for the 988G Wheel Loader
CID 1582 FMI 04 Trans Lube Oil Temp Sensor short to ground
3176C, 3406E and 3456 Engines for 816F, 826G Series II, and 836G Landfill Compactors, 815F and 825G Series II Soil Compactors, 814F, 824G Series II, and 834G Wheel Dozers, and for the 988G Wheel Loader
CID 1589 FMI 03 Turbo Inlet Air Pressure Sensor open/shrt to +bat
3176C, 3406E and 3456 Engines for 816F, 826G Series II, and 836G Landfill Compactors, 815F and 825G Series II Soil Compactors, 814F, 824G Series II, and 834G Wheel Dozers, and for the 988G Wheel Loader
Engine Fan Control Solenoid Circuit - Test
3176C, 3406E and 3456 Engines for 816F, 826G Series II, and 836G Landfill Compactors, 815F and 825G Series II Soil Compactors, 814F, 824G Series II, and 834G Wheel Dozers, and for the 988G Wheel Loader
CID 0190 FMI 02 Loss of Engine Speed Signal
3176C, 3406E and 3456 Engines for 816F, 826G Series II, and 836G Landfill Compactors, 815F and 825G Series II Soil Compactors, 814F, 824G Series II, and 834G Wheel Dozers, and for the 988G Wheel Loader
Sensors and Electrical Connectors
3176C, 3406E and 3456 Engines for 816F, 826G Series II, and 836G Landfill Compactors, 815F and 825G Series II Soil Compactors, 814F, 824G Series II, and 834G Wheel Dozers, and for the 988G Wheel Loader
CID 0485 FMI 05 Engine Fan Rev Solenoid open circuit
3176C, 3406E and 3456 Engines for 816F, 826G Series II, and 836G Landfill Compactors, 815F and 825G Series II Soil Compactors, 814F, 824G Series II, and 834G Wheel Dozers, and for the 988G Wheel Loader
CID 0485 FMI 06 Engine Fan Rev Solenoid short to ground
3176C, 3406E and 3456 Engines for 816F, 826G Series II, and 836G Landfill Compactors, 815F and 825G Series II Soil Compactors, 814F, 824G Series II, and 834G Wheel Dozers, and for the 988G Wheel Loader
Engine Fan Reversing Solenoid Circuit - Test
3176C, 3406E and 3456 Engines for 816F, 826G Series II, and 836G Landfill Compactors, 815F and 825G Series II Soil Compactors, 814F, 824G Series II, and 834G Wheel Dozers, and for the 988G Wheel Loader
MID 081 - CID 0368 - FMI 03
826G Series II Landfill Compactor, 825G Series II Soil Compactor and 824G Series II Wheel Dozer
MID 081 - CID 0368 - FMI 04
826G Series II Landfill Compactor, 825G Series II Soil Compactor and 824G Series II Wheel Dozer
MID 081 - CID 0177 - FMI 03
826G Series II Landfill Compactor, 825G Series II Soil Compactor and 824G Series II Wheel Dozer
MID 081 - CID 0177 - FMI 04
826G Series II Landfill Compactor, 825G Series II Soil Compactor and 824G Series II Wheel Dozer
MID 081 - CID 0793 - FMI 03
826G Series II Landfill Compactor, 825G Series II Soil Compactor and 824G Series II Wheel Dozer
MID 081 - CID 0793 - FMI 04
826G Series II Landfill Compactor, 825G Series II Soil Compactor and 824G Series II Wheel Dozer
CID 0342 FMI 02 Loss of Secondary Engine Speed signal
3176C, 3406E and 3456 Engines for 816F, 826G Series II, and 836G Landfill Compactors, 815F and 825G Series II Soil Compactors, 814F, 824G Series II, and 834G Wheel Dozers, and for the 988G Wheel Loader
MID 082 - CID 0650 - FMI 12
824G Series II Wheel Dozer, 825G Series II
Soil Compactor and 826G Series II
Landfill Compactor Electrohydraulic System
Connector Locations
824G Series II Wheel Dozer, 825G Series II
Soil Compactor and 826G Series II
Landfill Compactor Electrohydraulic System
MID 081 - CID 0650 - FMI 02
826G Series II Landfill Compactor, 825G Series II Soil Compactor and 824G Series II Wheel Dozer
MID 081 - CID 0650 - FMI 09
826G Series II Landfill Compactor, 825G Series II Soil Compactor and 824G Series II Wheel Dozer
MID 081 - CID 0627 - FMI 03
826G Series II Landfill Compactor, 825G Series II Soil Compactor and 824G Series II Wheel Dozer
MID 081 - CID 0627 - FMI 04
826G Series II Landfill Compactor, 825G Series II Soil Compactor and 824G Series II Wheel Dozer
MID 082 - CID 0650 - FMI 11
824G Series II Wheel Dozer, 825G Series II
Soil Compactor and 826G Series II
Landfill Compactor Electrohydraulic System
MID 082 - CID 0650 - FMI 09
824G Series II Wheel Dozer, 825G Series II
Soil Compactor and 826G Series II
Landfill Compactor Electrohydraulic System
CID 0486 FMI 02 Engine Fan Reverse Switch inputs incorrect
3176C, 3406E and 3456 Engines for 816F, 826G Series II, and 836G Landfill Compactors, 815F and 825G Series II Soil Compactors, 814F, 824G Series II, and 834G Wheel Dozers, and for the 988G Wheel Loader
Engine Wiring Information
3176C, 3406E and 3456 Engines for 816F, 826G Series II, and 836G Landfill Compactors, 815F and 825G Series II Soil Compactors, 814F, 824G Series II, and 834G Wheel Dozers, and for the 988G Wheel Loader
CID 0262 FMI 03 5 Volt Sensor DC Power Supply short to +batt
3176C, 3406E and 3456 Engines for 816F, 826G Series II, and 836G Landfill Compactors, 815F and 825G Series II Soil Compactors, 814F, 824G Series II, and 834G Wheel Dozers, and for the 988G Wheel Loader
CID 1589 FMI 04 Turbo Inlet Air Pressure Sensor short to ground
3176C, 3406E and 3456 Engines for 816F, 826G Series II, and 836G Landfill Compactors, 815F and 825G Series II Soil Compactors, 814F, 824G Series II, and 834G Wheel Dozers, and for the 988G Wheel Loader
Electrical Component and Connector Locations
Payload Control System (PCS) 2.X
MID 074 - CID 0364 - FMI 01
Payload Control System (PCS) 2.X
MID 074 - CID 0364 - FMI 02
Payload Control System (PCS) 2.X
MID 074 - CID 0364 - FMI 08
Payload Control System (PCS) 2.X
MID 074 - CID 0769 - FMI 01
Payload Control System (PCS) 2.X
MID 074 - CID 0769 - FMI 02
Payload Control System (PCS) 2.X
MID 074 - CID 0769 - FMI 08
Payload Control System (PCS) 2.X
Engine Shutdown Switch Circuit - Test
3176C, 3406E and 3456 Engines for 816F, 826G Series II, and 836G Landfill Compactors, 815F and 825G Series II Soil Compactors, 814F, 824G Series II, and 834G Wheel Dozers, and for the 988G Wheel Loader
Service Magazine
Dielectric Grease Should Not Be Used in Electrical Connectors {1408, 7553}
2012/05/04
An Improved Battery Cable and Mounting Hardware Is Now Available {1401, 1402}
2005/03/28
Service of the Machined Terminals and the Stamped and Formed Terminals {7553}
2006/11/13
Updated Instruction For The Bypass Harness {0785, 1408}
2008/03/17
Improvements to the Fuel Sender Group {1273, 1408, 6201, 7481, 7857}
2009/07/27
Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2010/05/12
Striped Wire Is Replaced With Improved Ink Jet Identification for Legacy (Parts Service) Wire harnesses {1408}
2012/06/08
Use Conductive Fasteners for Electrical Grounding on All Cat Products {7553, 7556}
2012/05/08
Information On Battery Cables and Wire Assemblies for Assembling at Dealer Site {4459}
2012/09/21
An Improved Routing Process is Now Available When Replacing 192-7805 Harness As in TLV1 Seat Suspensions on Certain Machines {1408, 7312, 7324}
2013/12/09
Parts are Now Available to Make Jump Start Receptacle on Cat<SUP>&reg;</SUP> Product {1463}
2014/03/04
Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}
Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}
Improved Wiring Harnesses Are Now Used on Certain C15 Machine Engines {1290, 1408, 1900}
Improved Wiring Harnesses Are Now Used on Certain C15 Machine Engines {1290, 1408, 1900}

Caterpillar Parts SIS Catalog 826G II :

SWITCH GP-WIPER
3E-0155 SWITCH GP-WIPER
SENSOR GP-POSITION
214-4863 SENSOR GP-POSITION
SENSOR GP-POSITION
176-1602 SENSOR GP-POSITION
LIGHTING GP-FLOOD
198-8845 LIGHTING GP-FLOOD
LAMP GP-FLOOD
147-0319 LAMP GP-FLOOD
LAMP GP-DOME
3E-6389 LAMP GP-DOME
CONTROL GP-UNPROGRAMMED
172-9391 CONTROL GP-UNPROGRAMMED
CONTROL GP-UNPROGRAMMED
172-9389 CONTROL GP-UNPROGRAMMED
CONTROL GP-STIC
4E-8413 CONTROL GP-STIC
CONTROL GP-STIC
177-4113 CONTROL GP-STIC
LOCK GP-STIC CONTROL
187-0738 LOCK GP-STIC CONTROL
HARDWARE GP-REAR FRAME
219-5149 HARDWARE GP-REAR FRAME
BASE GP-FOOT BRAKE
180-4003 BASE GP-FOOT BRAKE
BASE GP-FOOT BRAKE
180-4004 BASE GP-FOOT BRAKE
CONTROL GP-FOOT BRAKE
169-8257 CONTROL GP-FOOT BRAKE
CONTROL GP-FOOT BRAKE
180-4002 CONTROL GP-FOOT BRAKE

Truck sale:

 
 
Caterpillar 826GII, Construction
- Waste Compactors
YANCEY BROS. CO.
GA
Caterpillar 826GII, Construction
499,500 
Caterpillar 826GII, Construction
- Waste Compactors
ALTORFER INC.
 
 
CATERPILLAR 826GII 2003
- COMPACTORS
YANCEY BROS CO
Paul Dabbs 770-819-5524, John Gorham 770-819-5154 Tom Tucker 770-819-5204, Luis Castr
2004 CAT 826G II
USD $525,000 
2004 CAT 826G II

ALTORFER INC
Springfield, Illinois
2002 CAT 826G II
Call 
2002 CAT 826G II

C&K Equipment Co.
Knoxville, Tennessee
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.