AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

STEEL MILL OR THE 927GI / T951G/ AXC WHEEL LOADERS AXC00001-UP (MACHINE) FUEL SYSTEM Caterpillar SIS



WHEEL LOADER 972G II WHEEL LOADER AXC
 STEEL MILL OR THE 927GI / T951G/ AXC WHEEL LOADERS AXC00001-UP (MACHINE) SEBC1440 972G II AXC   (1999)

Parts group 972G II:

  For full view, you need register
FUEL SYSTEM
TANK GP-FUEL
TANK GP-FUEL
189-8262 TANK GP-FUEL
189-8262 TANK GP-FUEL -CUSTOM
PART OF 240-6421 STEEL MILL AR

Information:

(For parts list, see above)

Engine News
A New Specification Has Been Issued for the Primary Fuel Filter Filtration {1250, 1261}
2012/08/21
A New Specification Has Been Issued for the Primary Fuel Filter Filtration {1260}
A New Specification Has Been Issued for the Primary Fuel Filter Filtration {1260}
Operation and Maintenance Manual
Fuel System - Prime
966G II and 972G II Wheel Loaders
Fuel System Primary Filter (Water Separator) - Drain
966G II and 972G II Wheel Loaders
Fuel System Primary Filter (Water Separator) Element - Replace
966G II and 972G II Wheel Loaders
Fuel System Secondary Filter - Replace
966G II and 972G II Wheel Loaders
Special Instruction
Installation of Fuel/Water Separator{1260, 1263}
Installation of Fuel/Water Separator{1260, 1263}
Managing Engine Oil Service Intervals for Equipment Operating at High Altitudes{1261, 1308, 1348}
Managing Engine Oil Service Intervals for Equipment Operating at High Altitudes{1261, 1308, 1348}
Troubleshooting the Fuel Priming and Primary Filter Pump Gp and the Fuel Filter Base Assembly {1256, 1258, 1260, 1261, 1263}
Troubleshooting the Fuel Priming and Primary Filter Pump Gp and the Fuel Filter Base Assembly {1256, 1258, 1260, 1261, 1263}
Specifications
Fuel Filter Base
3176C and 3196 Engines for Caterpillar Built Machines
Tool Operating Manual
295-0048 Bulk Fuel Filtration Group 300 GPM Flow Rate{0374, 0599, 0680, 0706, 1250, 1261, 1280}
295-0048 Bulk Fuel Filtration Group 300 GPM Flow Rate{0374, 0599, 0680, 0706, 1250, 1261, 1280}
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
Information Release Memo
CATERPILLAR REMAN ANNOUNCES THE INTRODUCTION OF REMANUFACTURED INJECTOR KITS FOR CERTAIN 3126B, C-12, and C15 ACERT ENGINES
CATERPILLAR REMAN ANNOUNCES THE INTRODUCTION OF REMANUFACTURED INJECTOR KITS FOR CERTAIN 3126B, C-12, and C15 ACERT ENGINES
Disassembly and Assembly
Fuel Filter Base - Remove
3176C and 3196 Engines For Caterpillar Built Machines
Fuel Filter Base - Install
3176C and 3196 Engines For Caterpillar Built Machines
Fuel Priming Pump and Primary Filter (Water Separator) - Remove and Install - Engine in Chassis
966G Series II and 972G Series II Wheel Loaders Engine Supplement
Fuel Filter (Secondary) and Fuel Filter Base - Remove and Install - Engine in Chassis
966G Series II and 972G Series II Wheel Loaders Engine Supplement
Service Magazine
A New Check Valve is Available for the Fuel Filter Base {1262}
2003/06/30
An Improved Valve in the Bowl of the Fuel/Water Separator is Available {1261, 1263}
2004/12/20
Improved Fuel/Water Separators are now Used {1260, 1261, 1263}
2005/07/11
The Proper Procedure to Enter Claims in SIMSi for Plugged /Restricted Fuel Filters and Water Separators on All Machines {1260, 1261, 1262, 1263}
2007/07/30
New Primary Fuel Filters are Available {1260, 1261}
2008/07/14
A New Bowl for the Fuel/Water Separator Is Used {1261, 1263}
2009/10/29
New All Metal Fuel and Water Separators Are Used For Certain Machines {1261, 1263}
2013/06/27
Tool Operating Manual
NEHS1126: <NOBR>370-8570</NOBR> Bulk Fuel Filtration Group 200 GPM Flow Rate {0599, 0680, 0706, 0782, 1250, 1280}
NEHS1126: 370-8570 Bulk Fuel Filtration Group 200 GPM Flow Rate {0599, 0680, 0706, 0782, 1250, 1280}
370-8568 Bulk Fuel Filtration Group 50 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
370-8568 Bulk Fuel Filtration Group 50 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
284-0413 Bulk Fuel Filtration Group 50 GPM Flow Rate{0680, 0782, 1250, 1280}
284-0413 Bulk Fuel Filtration Group 50 GPM Flow Rate{0680, 0782, 1250, 1280}
284-0415 Bulk Fuel Filtration Group 100 GPM Flow Rate{0680, 0782, 1250, 1280}
284-0415 Bulk Fuel Filtration Group 100 GPM Flow Rate{0680, 0782, 1250, 1280}
284-0416 Bulk Fuel Filtration Group 200 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
284-0416 Bulk Fuel Filtration Group 200 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
295-0048 Bulk Fuel Filtration Group 300 GPM Flow Rate{0374, 0599, 0680, 0706, 1250, 1261, 1280}
295-0048 Bulk Fuel Filtration Group 300 GPM Flow Rate{0374, 0599, 0680, 0706, 1250, 1261, 1280}
370-8569 Bulk Fuel Filtration Group 100 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
370-8569 Bulk Fuel Filtration Group 100 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
370-8571 Bulk Fuel Filtration Group 300 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
370-8571 Bulk Fuel Filtration Group 300 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Testing and Adjusting Fuel Injection Pump and Governor on 3064 and 3066 Engines{0374, 0599, 0706}
Testing and Adjusting Fuel Injection Pump and Governor on 3064 and 3066 Engines{0374, 0599, 0706}
169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}
169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}
398-9680 Calibration Test Group{0599, 0706, 1250, 1251, 1252, 1280}
398-9680 Calibration Test Group{0599, 0706, 1250, 1251, 1252, 1280}
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
Service Magazine
An Improved Fuel Level Sender is Now Available {1273}
2008/05/19
Specifications
Fuel Lines
3176C and 3196 Engines for Caterpillar Built Machines
Tool Operating Manual
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Information Release Memo
CATERPILLAR REMAN ANNOUNCES THE INTRODUCTION OF REMANUFACTURED INJECTOR KITS FOR CERTAIN 3126B, C-12, and C15 ACERT ENGINES
CATERPILLAR REMAN ANNOUNCES THE INTRODUCTION OF REMANUFACTURED INJECTOR KITS FOR CERTAIN 3126B, C-12, and C15 ACERT ENGINES
Disassembly and Assembly
Fuel Manifold - Remove
3176C and 3196 Engines For Caterpillar Built Machines
Fuel Manifold - Install
3176C and 3196 Engines For Caterpillar Built Machines
Fuel Filter (Secondary) and Fuel Filter Base - Remove and Install - Engine in Chassis
966G Series II and 972G Series II Wheel Loaders Engine Supplement
Service Magazine
New Fuel Filter Base Has Been Released {1261}
2003/09/15
A Two Piece Clip and Grommet Are Used On the Fuel Lines On Certain Machine Engines {1250, 1250, 7553}
2013/09/02
Technical Information Bulletin
The Valve Body May Crack on Certain Remanufactured Fuel Injectors{1290}
The Valve Body May Crack on Certain Remanufactured Fuel Injectors{1290}
Tool Operating Manual
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
398-9680 Calibration Test Group{0599, 0706, 1250, 1251, 1252, 1280}
398-9680 Calibration Test Group{0599, 0706, 1250, 1251, 1252, 1280}
Information Release Memo
CATERPILLAR REMAN ANNOUNCES THE INTRODUCTION OF REMANUFACTURED INJECTOR KITS FOR CERTAIN 3126B, C-12, and C15 ACERT ENGINES
CATERPILLAR REMAN ANNOUNCES THE INTRODUCTION OF REMANUFACTURED INJECTOR KITS FOR CERTAIN 3126B, C-12, and C15 ACERT ENGINES
Service Magazine
Do Not Reuse the Hold Down Bolts for the Fuel Injectors On All Products that Contain C9 Through C32 Engines {1290}
2014/08/14
Calibration Fluid for Fuel Nozzle Test Equipment Is Available {1252, 1254}
2008/12/01
The Procedure For Tightening The Clamping Bolt For The Unit Injector Has Changed {1250, 1290}
2002/10/21
Tool Operating Manual
169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}
169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}
169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}
Service Magazine
The Procedure for the Installation of the Electronic Unit Injector has changed. {1290}
2014/05/08
Replace the Fuel Injector Hold-Down Bolt When You Service the Electronic Unit Injectors on Engines, Including Remanufactured Engines with Serial Number Prefix 3LZ, AKB, ALS or R1D {1251, 1254}
2006/03/27
Truck Engine News
Policy on Testing of Fuel Injectors and Fuel Nozzles {1251}
2008/11/01
Do Not Use the 6V-4022 Fuel Injector Tester to Measure Unit Injector Fuel Flow Rate {0782, 1251, 1254, 1290, 1713}
2008/11/01
Engine News
Policy on Testing of Fuel Injectors and Fuel Nozzles {1251}
2008/11/17
The Pop (Injector) Tester Is not Available for Fuel Injectors {0782, 1251, 1254, 1290, 1713}
2008/11/17
Operation and Maintenance Manual
Electronic Unit Injector - Inspect/Adjust
966G II and 972G II Wheel Loaders
Special Instruction
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Service Letter-NACD
THE INJECTOR PUSHROD NEEDS TO BE CHECKED AND REPLACED IN CERTAIN C-10, C-12, 3176C AND 3196 ENGINES
THE INJECTOR PUSHROD NEEDS TO BE CHECKED AND REPLACED IN CERTAIN C-10, C-12, 3176C AND 3196 ENGINES
Service Letter-CSARL
Service Letter-Truck/Ag/Marine
Technical Information Bulletin
The Valve Body May Crack on Certain Remanufactured Fuel Injectors{1290}
The Valve Body May Crack on Certain Remanufactured Fuel Injectors{1290}
Specifications
Electronic Unit Injector Wiring
3176C and 3196 Engines for Caterpillar Built Machines
Electronic Unit Injector Mechanism
3176C and 3196 Engines for Caterpillar Built Machines
Electronic Unit Injector
3176C and 3196 Engines for Caterpillar Built Machines
Tool Operating Manual
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the TMI System to Retrieve Off Engine Injection Pump Test Specifications for the Fuel Injection Equipment Test Stand{0706, 0782, 1251, 1286}
Using the TMI System to Retrieve Off Engine Injection Pump Test Specifications for the Fuel Injection Equipment Test Stand{0706, 0782, 1251, 1286}
Testing and Adjusting Fuel Injection Pump and Governor on 3064 and 3066 Engines{0374, 0599, 0706}
Testing and Adjusting Fuel Injection Pump and Governor on 3064 and 3066 Engines{0374, 0599, 0706}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}
169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}
Reuse And Salvage Guidelines
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
Information Release Memo
REMANUFACTURED FUEL INJECTORS FOR VARIOUS INDUSTRIAL, MACHINE, AND ON-HIGHWAY TRUCK APPLICATIONS-ADDENDUM
REMANUFACTURED FUEL INJECTORS FOR VARIOUS INDUSTRIAL, MACHINE, AND ON-HIGHWAY TRUCK APPLICATIONS-ADDENDUM
CATERPILLAR REMAN ANNOUNCES THE INTRODUCTION OF REMANUFACTURED INJECTOR KITS FOR CERTAIN 3126B, C-12, and C15 ACERT ENGINES
CATERPILLAR REMAN ANNOUNCES THE INTRODUCTION OF REMANUFACTURED INJECTOR KITS FOR CERTAIN 3126B, C-12, and C15 ACERT ENGINES
Testing and Adjusting
Electronic Unit Injector - Adjust
3176C and 3196 Engines for Caterpillar Built Machines
Electronic Unit Injector - Test
3176C and 3196 Engines for Caterpillar Built Machines
Troubleshooting
Injector Solenoid Circuit - Test
3176C, 3196 and 3406E Engines for Caterpillar Built Machines
Injector Code - Calibrate
3176C, 3196 and 3406E Engines for Caterpillar Built Machines
CID 0001 FMI 11 Cylinder #1 Injector fault
3176C, 3196 and 3406E Engines for Caterpillar Built Machines
CID 0002 FMI 11 Cylinder #2 Injector fault
3176C, 3196 and 3406E Engines for Caterpillar Built Machines
CID 0003 FMI 11 Cylinder #3 Injector fault
3176C, 3196 and 3406E Engines for Caterpillar Built Machines
CID 0004 FMI 11 Cylinder #4 Injector fault
3176C, 3196 and 3406E Engines for Caterpillar Built Machines
CID 0005 FMI 11 Cylinder #5 Injector fault
3176C, 3196 and 3406E Engines for Caterpillar Built Machines
CID 0006 FMI 11 Cylinder #6 Injector fault
3176C, 3196 and 3406E Engines for Caterpillar Built Machines
Disassembly and Assembly
Electronic Unit Injector - Remove
3176C and 3196 Engines For Caterpillar Built Machines
Electronic Unit Injector - Install
3176C and 3196 Engines For Caterpillar Built Machines
Electronic Unit Injector - Remove
966G Series II and 972G Series II Wheel Loaders Engine Supplement
Electronic Unit Injector - Install
966G Series II and 972G Series II Wheel Loaders Engine Supplement
Electronic Unit Injector Sleeve - Remove
966G Series II and 972G Series II Wheel Loaders Engine Supplement
Electronic Unit Injector Sleeve - Install
966G Series II and 972G Series II Wheel Loaders Engine Supplement
Service Magazine
Improved O-Ring Seals for Fuel Injectors for Longer Seal Life {1254}
2003/10/20
The Procedure for the Removal of the Electronic Unit Injector has Changed. {1290}
2004/05/10
Replace the Fuel Injector Hold-Down Bolt When You Service the Electronic Unit Injectors on Engines, Including Remanufactured Engines with Serial Number Prefix 3LZ, AKB, ALS or R1D {1251, 1254}
2006/03/27
Do Not Reuse the Hold Down Bolts for the Fuel Injectors On All Products that Contain C9 Through C32 Engines {1290}
2014/08/14
Policy on Testing of Fuel Injectors and Fuel Nozzles {1251}
2008/11/17
Do Not Use the 6V-4022 Fuel Injector Tester to Measure Unit Injector Fuel Flow Rate {1251, 1254, 1290, 1713}
2008/11/17
The Pop (Injector) Tester Is not Available for Fuel Injectors {0782, 1251, 1254, 1290, 1713}
2008/11/17
Cat<SUP>&reg;</SUP> Reman Is Announcing an Appearance Change to the EI550 Classic, Bridge, and ACERT Electronic Unit Injectors for Certain Machine Engines {1290}
2015/06/04
Truck Engine News
An Improved Hand Operated Fuel Priming Pump Is Available {1258}
2012/11/26
Engine News
An Improved Hand Operated Fuel Priming Pump Is Available {1258}
2012/10/08
Operation and Maintenance Manual
Fuel System - Prime
966G II and 972G II Wheel Loaders
Fuel System Primary Filter (Water Separator) - Drain
966G II and 972G II Wheel Loaders
Fuel System Primary Filter (Water Separator) Element - Replace
966G II and 972G II Wheel Loaders
Special Instruction
Troubleshooting the Fuel Priming and Primary Filter Pump Gp and the Fuel Filter Base Assembly {1256, 1258, 1260, 1261, 1263}
Troubleshooting the Fuel Priming and Primary Filter Pump Gp and the Fuel Filter Base Assembly {1256, 1258, 1260, 1261, 1263}
Service Letter-NACD
PRODUCT SUPPORT PROGRAM FOR INSTALLING A HAND PRIMING FUEL PUMP ON CERTAIN C7, C9, C10, C11, C12, C13, C15, C16, C18, C30, C32, E90 3126, 3176, 3196, 3456, 3406, G3406, 3408 AND 3412 ENGINES
PRODUCT SUPPORT PROGRAM FOR INSTALLING A HAND PRIMING FUEL PUMP ON CERTAIN C7, C9, C10, C11, C12, C13, C15, C16, C18, C30, C32, E90 3126, 3176, 3196, 3456, 3406, G3406, 3408 AND 3412 ENGINES
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Truck/Ag/Marine
Technical Information Bulletin
Faulty Fuel Priming Pumps on Various Engines
Faulty Fuel Priming Pumps on Various Engines
The Electronic Priming Pump for Machine Engines will not Prime{1258, 1263}
The Electronic Priming Pump for Machine Engines will not Prime{1258, 1263}
Tool Operating Manual
Using the TMI System to Retrieve Off Engine Injection Pump Test Specifications for the Fuel Injection Equipment Test Stand{0706, 0782, 1251, 1286}
Using the TMI System to Retrieve Off Engine Injection Pump Test Specifications for the Fuel Injection Equipment Test Stand{0706, 0782, 1251, 1286}
Testing and Adjusting Fuel Injection Pump and Governor on 3064 and 3066 Engines{0374, 0599, 0706}
Testing and Adjusting Fuel Injection Pump and Governor on 3064 and 3066 Engines{0374, 0599, 0706}
Service Letter-China
PRODUCT SUPPORT PROGRAM FOR INSTALLING A HAND PRIMING FUEL PUMP ON CERTAIN C7, C9, C10, C11, C12, C13, C15, C16, C18, C30, C32, E90 3126, 3176, 3196, 3456, 3406, G3406, 3408 AND 3412 ENGINES
PRODUCT SUPPORT PROGRAM FOR INSTALLING A HAND PRIMING FUEL PUMP ON CERTAIN C7, C9, C10, C11, C12, C13, C15, C16, C18, C30, C32, E90 3126, 3176, 3196, 3456, 3406, G3406, 3408 AND 3412 ENGINES
Service Letter-Asia
Service Letter-APD
Testing and Adjusting
Fuel System - Prime
3176C and 3196 Engines for Caterpillar Built Machines
Disassembly and Assembly
Fuel Priming Pump - Remove and Install
3176C and 3196 Engines For Caterpillar Built Machines
Fuel Priming Pump and Primary Filter (Water Separator) - Remove and Install - Engine in Chassis
966G Series II and 972G Series II Wheel Loaders Engine Supplement
Service Magazine
Improved Mounting Bracket Is Now Being Used for the Fuel Priming Pump Switch {1258, 7332}
2005/02/14
Replacement of the Priming Pump {1258, 1263}
2007/12/24
An Improved Fuel Priming Pump Gasket Is Now Used on Certain Machine Engines {1258, 7555}
2011/06/08
An Improved Hand Operated Fuel Priming Pump Is Available {1258}
2012/10/04
Special Instruction
Troubleshooting the Fuel Priming and Primary Filter Pump Gp and the Fuel Filter Base Assembly {1256, 1258, 1260, 1261, 1263}
Troubleshooting the Fuel Priming and Primary Filter Pump Gp and the Fuel Filter Base Assembly {1256, 1258, 1260, 1261, 1263}
Specifications
Fuel Transfer Pump
3176C and 3196 Engines for Caterpillar Built Machines
Tool Operating Manual
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
Testing and Adjusting
Fuel System Pressure - Test
3176C and 3196 Engines for Caterpillar Built Machines
Disassembly and Assembly
Fuel Transfer Pump - Remove
3176C and 3196 Engines For Caterpillar Built Machines
Fuel Transfer Pump - Install
3176C and 3196 Engines For Caterpillar Built Machines
Fuel Transfer Pump - Remove and Install - Engine in Chassis
966G Series II and 972G Series II Wheel Loaders Engine Supplement
Service Magazine
A New Mounting Gasket for the Fuel Transfer Pump is Available {1256}
2004/10/04
Tool Operating Manual
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
Operation and Maintenance Manual
Fuel System Primary Filter (Water Separator) - Drain
966G II and 972G II Wheel Loaders
Fuel System Primary Filter (Water Separator) Element - Replace
966G II and 972G II Wheel Loaders
Special Instruction
Installation of Fuel/Water Separator{1260, 1263}
Installation of Fuel/Water Separator{1260, 1263}
Troubleshooting the Fuel Priming and Primary Filter Pump Gp and the Fuel Filter Base Assembly {1256, 1258, 1260, 1261, 1263}
Troubleshooting the Fuel Priming and Primary Filter Pump Gp and the Fuel Filter Base Assembly {1256, 1258, 1260, 1261, 1263}
Technical Information Bulletin
The Electronic Priming Pump for Machine Engines will not Prime{1258, 1263}
The Electronic Priming Pump for Machine Engines will not Prime{1258, 1263}
Disassembly and Assembly
Fuel Priming Pump and Primary Filter (Water Separator) - Remove and Install - Engine in Chassis
966G Series II and 972G Series II Wheel Loaders Engine Supplement
Service Magazine
An Improved Valve in the Bowl of the Fuel/Water Separator is Available {1261, 1263}
2004/12/20
Improved Fuel/Water Separators are now Used {1260, 1261, 1263}
2005/07/11
The Proper Procedure to Enter Claims in SIMSi for Plugged /Restricted Fuel Filters and Water Separators on All Machines {1260, 1261, 1262, 1263}
2007/07/30
Replacement of the Priming Pump {1258, 1263}
2007/12/24
A New Bowl for the Fuel/Water Separator Is Used {1261, 1263}
2009/10/29
Operation and Maintenance Manual
Fuel Tank Water and Sediment - Drain
966G II and 972G II Wheel Loaders
Fuel Tank Cap and Strainer - Clean
966G II and 972G II Wheel Loaders
Specifications
Fuel Level Sender
966G Series II Wheel Loader and 972G Series II Wheel Loader Machine Systems
Tool Operating Manual
NEHS1126: <NOBR>370-8570</NOBR> Bulk Fuel Filtration Group 200 GPM Flow Rate {0599, 0680, 0706, 0782, 1250, 1280}
NEHS1126: 370-8570 Bulk Fuel Filtration Group 200 GPM Flow Rate {0599, 0680, 0706, 0782, 1250, 1280}
370-8568 Bulk Fuel Filtration Group 50 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
370-8568 Bulk Fuel Filtration Group 50 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
284-0413 Bulk Fuel Filtration Group 50 GPM Flow Rate{0680, 0782, 1250, 1280}
284-0413 Bulk Fuel Filtration Group 50 GPM Flow Rate{0680, 0782, 1250, 1280}
284-0415 Bulk Fuel Filtration Group 100 GPM Flow Rate{0680, 0782, 1250, 1280}
284-0415 Bulk Fuel Filtration Group 100 GPM Flow Rate{0680, 0782, 1250, 1280}
284-0416 Bulk Fuel Filtration Group 200 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
284-0416 Bulk Fuel Filtration Group 200 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
295-0048 Bulk Fuel Filtration Group 300 GPM Flow Rate{0374, 0599, 0680, 0706, 1250, 1261, 1280}
295-0048 Bulk Fuel Filtration Group 300 GPM Flow Rate{0374, 0599, 0680, 0706, 1250, 1261, 1280}
370-8569 Bulk Fuel Filtration Group 100 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
370-8569 Bulk Fuel Filtration Group 100 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
370-8571 Bulk Fuel Filtration Group 300 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
370-8571 Bulk Fuel Filtration Group 300 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
Troubleshooting
MID 030 - CID 0096 - FMI 03
Caterpillar Monitoring System
MID 030 - CID 0096 - FMI 08
Caterpillar Monitoring System
Fuel Level Sender
Caterpillar Monitoring System
MID 030 - CID 0096 - FMI 04
Caterpillar Monitoring System
Disassembly and Assembly
Fuel Tank - Remove
966G Series II and 972G Series II Wheel Loaders Engine Supplement
Fuel Tank - Install
966G Series II and 972G Series II Wheel Loaders Engine Supplement
Service Magazine
Improved Fuel Level Sender Now Used {7481}
2003/11/03
Updated Fuel Tank Caps Are Now Available {1273}
2004/03/15
Updated Fuel Tank Caps are Now Available {1273}
Updated Fuel Tank Caps are Now Available {1273}
Welding On Fuel And Hydraulic Tanks {0353, 0679, 1273, 5056, 7000}
2005/12/19
An Improved Fuel Level Sender is Now Available {1273}
2008/05/19
Technical Information Bulletin
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
Tool Operating Manual
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-7840 Fuel Injection Equipment Calibration Fluid Test Kit{0374, 0599, 0706}
9U-7840 Fuel Injection Equipment Calibration Fluid Test Kit{0374, 0599, 0706}
NEHS1126: <NOBR>370-8570</NOBR> Bulk Fuel Filtration Group 200 GPM Flow Rate {0599, 0680, 0706, 0782, 1250, 1280}
NEHS1126: 370-8570 Bulk Fuel Filtration Group 200 GPM Flow Rate {0599, 0680, 0706, 0782, 1250, 1280}
Using the Cat 179-0710 Burn Rate Fuel Flow Measurement System {0374, 0599, 0706, 1250, 1280}
Using the Cat 179-0710 Burn Rate Fuel Flow Measurement System {0374, 0599, 0706, 1250, 1280}
370-8568 Bulk Fuel Filtration Group 50 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
370-8568 Bulk Fuel Filtration Group 50 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
284-0413 Bulk Fuel Filtration Group 50 GPM Flow Rate{0680, 0782, 1250, 1280}
284-0413 Bulk Fuel Filtration Group 50 GPM Flow Rate{0680, 0782, 1250, 1280}
284-0415 Bulk Fuel Filtration Group 100 GPM Flow Rate{0680, 0782, 1250, 1280}
284-0415 Bulk Fuel Filtration Group 100 GPM Flow Rate{0680, 0782, 1250, 1280}
284-0416 Bulk Fuel Filtration Group 200 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
284-0416 Bulk Fuel Filtration Group 200 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
295-0048 Bulk Fuel Filtration Group 300 GPM Flow Rate{0374, 0599, 0680, 0706, 1250, 1261, 1280}
295-0048 Bulk Fuel Filtration Group 300 GPM Flow Rate{0374, 0599, 0680, 0706, 1250, 1261, 1280}
370-8569 Bulk Fuel Filtration Group 100 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
370-8569 Bulk Fuel Filtration Group 100 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
370-8571 Bulk Fuel Filtration Group 300 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
370-8571 Bulk Fuel Filtration Group 300 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the TMI System to Retrieve Off Engine Injection Pump Test Specifications for the Fuel Injection Equipment Test Stand{0706, 0782, 1251, 1286}
Using the TMI System to Retrieve Off Engine Injection Pump Test Specifications for the Fuel Injection Equipment Test Stand{0706, 0782, 1251, 1286}
Testing and Adjusting Fuel Injection Pump and Governor on 3064 and 3066 Engines{0374, 0599, 0706}
Testing and Adjusting Fuel Injection Pump and Governor on 3064 and 3066 Engines{0374, 0599, 0706}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
146-1738 Precision Borescope (Hawkeye){0599, 0614, 0644, 0701, 0706, 0708, 0727, 0738}
146-1738 Precision Borescope (Hawkeye){0599, 0614, 0644, 0701, 0706, 0708, 0727, 0738}
169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}
169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}
398-9680 Calibration Test Group{0599, 0706, 1250, 1251, 1252, 1280}
398-9680 Calibration Test Group{0599, 0706, 1250, 1251, 1252, 1280}
NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}
NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}
131-5051 Dataview Group and Dataview Portable Tech Station Group{0374, 0599, 0701, 0709}
131-5051 Dataview Group and Dataview Portable Tech Station Group{0374, 0599, 0701, 0709}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
Reuse And Salvage Guidelines
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
Service Magazine
The 285-0910 Multi-Tool Gp Incorporates Four Diagnostic Tools into a Single, Hand Held Unit {0774, 0779, 0781, 0782}
2006/11/27
The Pop (Injector) Tester Is not Available for Fuel Injectors {0782, 1251, 1254, 1290, 1713}
2008/11/17
Service Letter-NACD
PRODUCT SUPPORT PROGRAM FOR REPLACING THE FUEL CHECK VALVE ON CERTAIN 966G-II AND 972G-II WHEEL LOADERS, AND 725 AND 730 ARTICULATED TRUCKS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE FUEL CHECK VALVE ON CERTAIN 966G-II AND 972G-II WHEEL LOADERS, AND 725 AND 730 ARTICULATED TRUCKS
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-China
Service Letter-Asia
Service Letter-APD

Truck sale:

Caterpillar 972GII, Construction
69,000 
Caterpillar 972GII, Construction
- Wheel Loaders
MILTON CAT
Caterpillar 972GII, Construction
77,500 
Caterpillar 972GII, Construction
- Wheel Loaders
BLANCHARD MACHINERY CO.
CATERPILLAR 972GII 2004
 
CATERPILLAR 972GII 2004
- WHEEL LOADERS/INTEGRATED TOOLCARRIERS
MACALLISTER MACHINERY
United States
CATERPILLAR 972GII 2003
 
CATERPILLAR 972GII 2003
- WHEEL LOADERS/INTEGRATED TOOLCARRIERS
MICHIGAN CAT
US (Mid, North), Canada, ON West: John Kinney; US (NE, SE, SW), Canada QU East, AUS: Bill Dowd;
CATERPILLAR 972GII 2005
$76,739 USD 
CATERPILLAR 972GII 2005
- WHEEL LOADERS/INTEGRATED TOOLCARRIERS
WESTRAC PTY. LTD.
- South Guildford - Western Australia
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.