ELECTRICAL AND STARTING SYSTEM
SENSOR GPOPERATOR STATION
MONITOR GPELECTRICAL AND STARTING SYSTEM
SENSOR GP
#SEBC14420001
221-3416: SENSOR GP-PRESSURE
221-3416 SENSOR GP-PRESSURE
PART OF 259-0535, 284-9603 MONITOR GP-PAYLOAD
PART OF 259-0535, 284-9603 MONITOR GP-PAYLOAD
For full view, you need register
Parts for your 966H WHEEL LOADER:
CATERPILLAR SIS#SEBC14420002
283-1604: CONTROL GP-MONITOR
283-1604 CONTROL GP-MONITOR -PAYLOAD
S/N JMS1-UP
PART OF 259-0535 MONITOR GP-PAYLOAD
S/N JMS1-UP
PART OF 259-0535 MONITOR GP-PAYLOAD
For full view, you need register
Parts for your 966H WHEEL LOADER:
CATERPILLAR SIS#SEBC14420003
283-1636: CONTROL GP-MONITOR
283-1636 CONTROL GP-MONITOR -PAYLOAD
S/N A6D1-UP; A7D1-UP; K5K1-UP; K6K1-UP
PART OF 284-9603 MONITOR GP-PAYLOAD
S/N A6D1-UP; A7D1-UP; K5K1-UP; K6K1-UP
PART OF 284-9603 MONITOR GP-PAYLOAD
For full view, you need register
Parts for your 966H WHEEL LOADER:
CATERPILLAR SIS#SEBC14420004
259-0535: MONITOR GP-PAYLOAD
For full view, you need register
Parts for your 966H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3E-5165 J | [1] | CAP AS-PROTECTION | |
| 2. | 3S-2093 J | [1] | STRAP-CABLE | |
| 3. | 6K-8180 J | [2] | GROMMET | |
| 4. | 7N-5876 J | [1] | LAMP (24-VOLT, 5.6-WATT) | |
| 5. | 9X-8917 J | [7] | SCREW-MACHINE (4-40X9.52-MM) | |
| 6. | 297-1398 J | [1] | MODULE GP-KEYPAD | |
| 102-8803 | [1] | KIT-RECEPTACLE (3-PIN) | ||
| [1] | FILM-KEYPAD | |||
| 7. | 188-1421 J | [1] | HARNESS AS-MONITOR (PAYLOAD CONTROL) | |
| 3E-5136 | [1] | RECEPTACLE AS-CONNECTOR (5-PIN) | ||
| 102-8801 | [1] | KIT-RECEPTACLE (12-PIN) | ||
| 7X-6222 | [1] | PLUG AS-CONNECTOR (24-PIN) | ||
| 155-2260 | [1] | KIT-CONNECTING PLUG (3-PIN) | ||
| 8. | 195-0973 J | [1] | BRACKET AS | |
| 6V-9632 M | [2] | NUT-WELD (M6X1-THD) | ||
| 9. | 195-0975 J | [1] | BRACKET AS | |
| 6V-9632 M | [5] | NUT-WELD (M6X1-THD) | ||
| 8T-8874 M | [4] | NUT-WELD (M5X0.8-THD) | ||
| 10. | 195-0976 J | [1] | COVER-FRONT | |
| 11. | 198-1941 J | [2] | HINGE AS | |
| 12. | 198-6588 J | [1] | COVER-FRONT | |
| 13. | 199-3417 J | [1] | PLATE | |
| 14. | 205-4933 J | [1] | FILM-EXIT (SECONDARY) | |
| 15. | 210-7016 J | [1] | COVER-REAR | |
| 16. | 210-7018 J | [2] | LATCH AS | |
| 17. | 224-9364 J | [1] | BRACKET AS | |
| 6V-9632 M | [5] | NUT-WELD (M6X1-THD) | ||
| 18. | 224-9367 J | [1] | BRACKET AS | |
| 6V-9632 M | [3] | NUT-WELD (M6X1-THD) | ||
| 19. | 224-9368 J | [1] | BRACKET AS | |
| 6V-9632 M | [4] | NUT-WELD (M6X1-THD) | ||
| 20. | 228-7137 J | [1] | COVER AS-REAR | |
| 21. | 241-4227 J | [1] | BRACKET | |
| 22. | 241-6393 J | [1] | BRACKET AS | |
| 6V-9632 M | [2] | NUT-WELD (M6X1-THD) | ||
| 23. | 283-1604 JY | [1] | CONTROL GP-MONITOR (PAYLOAD) | |
| 24. | 5C-9553 JM | [7] | BOLT (M6X1X16-MM) | |
| 25. | 6V-2313 JM | [4] | BOLT (M5X0.8X30-MM) | |
| 26. | 7Y-7256 JM | [4] | SCREW-TRUSS HEAD (M4X0.7-MM) | |
| 27. | 8T-0328 J | [4] | WASHER-HARD (5.5X10X1-MM THK) | |
| 28. | 8T-9471 J | [1] | GROMMET | |
| 29. | 9X-2040 JM | [6] | SCREW-TRUSS HEAD (M10X1.5X25-MM) | |
| 30. | 9X-2042 JM | [8] | SCREW-TRUSS HEAD (M6X1X12-MM) | |
| 31. | 9X-2045 JM | [6] | SCREW-TRUSS HEAD (M6X1X20-MM) | |
| 32. | 9X-8256 J | [7] | WASHER (6.6X12X2-MM THK) | |
| 33. | 7K-1181 L | [4] | STRAP-CABLE | |
| 34. | 8X-7517 L | [2] | BRACKET AS | |
| (EACH INCLUDES) | ||||
| 8T-3490 M | [1] | NUT-WELD (M10X1.5-THD) | ||
| 35. | 263-4169 L | [1] | HARNESS AS-MONITOR (PAYLOAD) | |
| 102-8803 | [2] | KIT-RECEPTACLE (3-PIN) | ||
| 102-8804 | [1] | KIT-RECEPTACLE (4-PIN) | ||
| (EACH KIT INCLUDES RECEPTACLE AS AND WEDGE) | ||||
| 36. | 130-5300 L | [2] | CLIP | |
| 37. | 5P-9297 L | [2] | CLIP | |
| 38. | 8T-4121 L | [2] | WASHER-HARD (11X21X2.5-MM THK) | |
| 39. | 8T-4136 LM | [2] | BOLT (M10X1.5X25-MM) | |
| 40. | 3T-6856 NI | [2] | HOSE AS | |
| 41. | 6V-0852 N | [2] | CAP-DUST | |
| 42. | 164-6871 N | [2] | ADAPTER AS | |
| 43. | 168-1968 N | [2] | TEE AS | |
| (EACH INCLUDES) | ||||
| 3J-1907 | [1] | SEAL-O-RING | ||
| 6V-8397 | [1] | SEAL-O-RING | ||
| 126-6872 | [1] | TEE | ||
| 44. | 221-3416 NY | [1] | SENSOR GP-PRESSURE (PAYLOAD, LIFT CYL HEAD END OIL) | |
| 44A. | 221-3416 NY | [1] | SENSOR GP-PRESSURE (PAYLOAD, LIFT CYL ROD END OIL) | |
| 45. | 265-2834 N | [2] | BLOCK | |
| 46. | 148-8378 N | [1] | ELBOW AS | |
| 3J-1907 | [1] | SEAL-O-RING | ||
| 6V-8397 | [1] | SEAL-O-RING | ||
| 6V-8724 | [1] | ELBOW | ||
| 47. | 150-3036 N | [1] | ELBOW AS | |
| 3J-1907 | [1] | SEAL-O-RING | ||
| 6V-8397 | [1] | SEAL-O-RING | ||
| 8T-1905 | [1] | ELBOW | ||
| 48. | 164-5567 N | [2] | COUPLER AS-QUICK DISCONNECT | |
| (EACH INCLUDES) | ||||
| 3J-1907 | [1] | SEAL-O-RING | ||
| 6V-3965 | [1] | FITTING (QUICK DISCONNECT) | ||
| 49. | 3J-1907 N | [2] | SEAL-O-RING | |
| 50. | 8T-4223 N | [4] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 51. | 8T-4910 NM | [4] | BOLT (M12X1.75X60-MM) | |
| 52. | 236-8117 O | [1] | FILM-INFORMATION (PAYLOAD CONTROL) | |
| ****STANDARD REMOVAL**** | ||||
| 9S-4191 AFP | [2] | PLUG-O-RING | ||
| 3J-1907 AFP | [2] | SEAL-O-RING | ||
| 178-7917 AFQ | [1] | MOUNTING GP-PRESSURE SENSOR (AUTODIG) | ||
| A | NOT PART OF THIS GROUP | |||
| F | NOT SHOWN | |||
| I | REFER TO HYDRAULIC INFORMATION SYSTEM | |||
| J | PART OF STANDARD MONITOR GP-PAYLOAD | |||
| L | PART OF STANDARD WIRING GP-SENSOR | |||
| M | METRIC PART | |||
| N | PART OF STANDARD MOUNTING GP-PRESSURE SENSOR | |||
| O | PART OF FILM GP-PCS | |||
| P | PART OF STANDARD LINES GP-LIFT CYLINDER | |||
| Q | PART OF STANDARD CONTROL AR-AUTODIG | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBC14420005
284-9603: MONITOR GP-PAYLOAD
For full view, you need register
Parts for your 966H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3J-1907 H | [1] | SEAL-O-RING | |
| 2. | 5I-4376 H | [1] | FITTING | |
| 3. | 6V-0852 H | [1] | CAP-DUST | |
| 4. | 164-5567 H | [1] | COUPLER AS-QUICK DISCONNECT | |
| 3J-1907 H | [1] | SEAL-O-RING | ||
| 6V-3965 H | [1] | FITTING (QUICK DISCONNECT) | ||
| 5. | 164-6871 H | [1] | ADAPTER AS | |
| 6V-8397 H | [1] | SEAL-O-RING | ||
| 122-2222 H | [1] | ADAPTER | ||
| 6. | 221-3416 HY | [1] | SENSOR GP-PRESSURE (LIFT CYLINDER OIL) | |
| 7. | 3E-5165 J | [1] | CAP AS-PROTECTION | |
| 8. | 3S-2093 J | [1] | STRAP-CABLE | |
| 9. | 5C-9553 JM | [7] | BOLT (M6X1X16-MM) | |
| 10. | 6K-8180 J | [2] | GROMMET | |
| 11. | 6V-2313 JM | [4] | BOLT (M5X0.8X30-MM) | |
| 12. | 7N-5876 J | [1] | LAMP (24-VOLT, 5.6-WATT) | |
| 13. | 7Y-7256 JM | [4] | SCREW-TRUSS HEAD (M4X0.7-MM) | |
| 14. | 8T-0328 J | [4] | WASHER-HARD (5.5X10X1-MM THK) | |
| 15. | 8T-9471 J | [1] | GROMMET | |
| 16. | 9X-2040 JM | [6] | SCREW-TRUSS HEAD (M10X1.5X25-MM) | |
| 17. | 9X-2042 JM | [8] | SCREW-TRUSS HEAD (M6X1X12-MM) | |
| 18. | 9X-2045 JM | [6] | SCREW-TRUSS HEAD (M6X1X20-MM) | |
| 19. | 9X-8256 J | [7] | WASHER (6.6X12X2-MM THK) | |
| 20. | 9X-8917 J | [7] | SCREW-MACHINE (4-40X9.52-MM) | |
| 21. | 297-1398 J | [1] | MODULE GP-KEYPAD | |
| 102-8803 J | [1] | KIT-RECEPTACLE (3-PIN) | ||
| J | [1] | FILM-KEYPAD | ||
| 22. | 188-1421 J | [1] | HARNESS AS-MONITOR (PAYLOAD CONTROL) | |
| 102-8801 J | [1] | KIT-RECEPTACLE (12-PIN) | ||
| (INCLUDES RECEPTACLE AS AND WEDGE) | ||||
| 7X-6222 J | [1] | PLUG AS-CONNECTOR (24-PIN) | ||
| 155-2260 J | [1] | KIT-CONNECTING PLUG (3-PIN) | ||
| (INCLUDES PLUG AS AND WEDGE) | ||||
| 23. | 195-0973 J | [1] | BRACKET AS | |
| 6V-9632 JM | [2] | NUT-WELD (M6X1-THD) | ||
| 24. | 195-0975 J | [1] | BRACKET AS | |
| 6V-9632 JM | [5] | NUT-WELD (M6X1-THD) | ||
| 8T-8874 JM | [4] | NUT-WELD (M5X0.8-THD) | ||
| 25. | 195-0976 J | [1] | COVER-FRONT | |
| 26. | 198-1941 J | [2] | HINGE AS | |
| 27. | 198-6588 J | [1] | COVER-FRONT | |
| 28. | 199-3417 J | [1] | PLATE | |
| 29. | 205-4933 J | [1] | FILM-EXIT (SECONDARY) | |
| 30. | 210-7016 J | [1] | COVER-REAR | |
| 31. | 210-7018 J | [2] | LATCH AS | |
| 32. | 224-9364 J | [1] | BRACKET AS | |
| 6V-9632 JM | [5] | NUT-WELD (M6X1-THD) | ||
| 9X-2032 JM | [4] | NUT-WELD (M4X0.7-THD) | ||
| 33. | 224-9367 J | [1] | BRACKET AS | |
| 6V-9632 JM | [3] | NUT-WELD (M6X1-THD) | ||
| 34. | 224-9368 J | [1] | BRACKET AS | |
| 6V-9632 JM | [4] | NUT-WELD (M6X1-THD) | ||
| 35. | 228-7137 J | [1] | COVER AS-REAR | |
| 36. | 241-4227 J | [1] | BRACKET | |
| 37. | 241-6393 J | [1] | BRACKET AS | |
| 6V-9632 JM | [2] | NUT-WELD (M6X1-THD) | ||
| 38. | 283-1636 JY | [1] | CONTROL GP-MONITOR (PAYLOAD) | |
| *****STANDARD REMOVAL***** | ||||
| 6V-9829 AFN | [1] | CAP AS | ||
| A | NOT PART OF THIS GROUP | |||
| F | NOT SHOWN | |||
| H | PART OF SENSOR & MOUNTING GP-PRESSURE | |||
| J | PART OF MONITOR GP-PAYLOAD | |||
| M | METRIC PART | |||
| N | TO BE REMOVED FROM STANDARD VALVE GP MANUAL | |||
| Y | SEPARATE ILLUSTRATION | |||
Information:
ELECTRICAL AND STARTING SYSTEM
SENSOR GP
Special Instruction
Replacement of the Oil Temperature Sensor for the Axle{429T}
Replacement of the Oil Temperature Sensor for the Axle{429T}
Replacement of the Oil Temperature Sensor for the Axle{429T}
Selecting the Correct Part Numbers for Sensors and Connectors{1439, 7553}
Selecting the Correct Part Numbers for Sensors and Connectors{1439, 7553}
Selecting the Correct Part Numbers for Sensors and Connectors{1439, 7553}
Procedure to Rework Wiring Harness for the Payload Pressure Sensor on Certain 966H and 972H Wheel Loaders{1408, 1925, 7494}
Procedure to Rework Wiring Harness for the Payload Pressure Sensor on Certain 966H and 972H Wheel Loaders{1408, 1925, 7494}
Procedure to Rework Wiring Harness for the Payload Pressure Sensor on Certain 966H and 972H Wheel Loaders{1408, 1925, 7494}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Service Letter-NACD
PRODUCT SUPPORT PROGRAM FOR REPLACING THE TILT SENSOR GUARDING ON CERTAIN 950H, 962H, 972H, AND 980H WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE TILT SENSOR GUARDING ON CERTAIN 950H, 962H, 972H, AND 980H WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE TILT SENSOR GUARDING ON CERTAIN 950H, 962H, 972H, AND 980H WHEEL LOADERS
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Technical Information Bulletin
Error Codes for the Transmission Output Speed Sensors May Be Logged{3030, 3175, 7610, 7620}
Error Codes for the Transmission Output Speed Sensors May Be Logged{3030, 3175, 7610, 7620}
Error Codes for the Transmission Output Speed Sensors May Be Logged{3030, 3175, 7610, 7620}
Primary Engine Speed Sensor Malfunctioning, Shorted, Open Circuit {1907, 1912}
Primary Engine Speed Sensor Malfunctioning, Shorted, Open Circuit {1907, 1912}
Primary Engine Speed Sensor Malfunctioning, Shorted, Open Circuit {1907, 1912}
Incorrect Atmospheric Sensor and Ladder Clip Orientation May Cause Pin Breakage on Certain C11 and C13 Engines {1439}
Incorrect Atmospheric Sensor and Ladder Clip Orientation May Cause Pin Breakage on Certain C11 and C13 Engines {1439}
Incorrect Atmospheric Sensor and Ladder Clip Orientation May Cause Pin Breakage on Certain C11 and C13 Engines {1439}
Specifications
Speed Sensor (Torque Converter Output) (Transmission Output)
966H Wheel Loader and 972H
Wheel Loader Power Train
966H Wheel Loader and 972H
Wheel Loader Power Train
Temperature Sensor (Front Axle Oil) (Rear Axle Oil)
966H Wheel Loader and 972H
Wheel Loader Power Train
966H Wheel Loader and 972H
Wheel Loader Power Train
Position Sensor (Left Brake Pedal)
966H Wheel Loader and 972H
Wheel Loader Braking and Hydraulic Fan System
966H Wheel Loader and 972H
Wheel Loader Braking and Hydraulic Fan System
Tool Operating Manual
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Service Letter-China
PRODUCT SUPPORT PROGRAM FOR REPLACING THE TILT SENSOR GUARDING ON CERTAIN 950H, 962H, 972H, AND 980H WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE TILT SENSOR GUARDING ON CERTAIN 950H, 962H, 972H, AND 980H WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE TILT SENSOR GUARDING ON CERTAIN 950H, 962H, 972H, AND 980H WHEEL LOADERS
Service Letter-Asia
Systems Operation
Position Sensor (Left Brake Pedal)
966H Wheel Loader and 972H
Wheel Loader Braking and Hydraulic Fan System
966H Wheel Loader and 972H
Wheel Loader Braking and Hydraulic Fan System
Reuse And Salvage Guidelines
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Custom Service Information
Replacement of the 124-4672 Pressure Sensor for the Payload Control System {1439, 7494}
Replacement of the 124-4672 Pressure Sensor for the Payload Control System {1439, 7494}
Replacement of the 124-4672 Pressure Sensor for the Payload Control System {1439, 7494}
Service Letter-APD
PRODUCT SUPPORT PROGRAM FOR REPLACING THE TILT SENSOR GUARDING ON CERTAIN 950H, 962H, 972H, AND 980H WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE TILT SENSOR GUARDING ON CERTAIN 950H, 962H, 972H, AND 980H WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE TILT SENSOR GUARDING ON CERTAIN 950H, 962H, 972H, AND 980H WHEEL LOADERS
Testing and Adjusting
Position Sensor for the Electrohydraulic Control Levers or Joystick Control (Electronic Technician) - Calibrate
966H Wheel Loader and 972H
Wheel Loader Electrohydraulic System
966H Wheel Loader and 972H
Wheel Loader Electrohydraulic System
Position Sensor for the Lift and Tilt Linkage (Electronic Technician) - Calibrate
966H Wheel Loader and 972H
Wheel Loader Electrohydraulic System
966H Wheel Loader and 972H
Wheel Loader Electrohydraulic System
Position Sensor for the Electrohydraulic Control Levers (Operator Monitor) - Calibrate
966H Wheel Loader and 972H
Wheel Loader Electrohydraulic System
966H Wheel Loader and 972H
Wheel Loader Electrohydraulic System
Position Sensor for the Joystick Control (Operator Monitor) - Calibrate
966H Wheel Loader and 972H
Wheel Loader Electrohydraulic System
966H Wheel Loader and 972H
Wheel Loader Electrohydraulic System
Position Sensor for the Lift Linkage (Operator Monitor) - Calibrate
966H Wheel Loader and 972H
Wheel Loader Electrohydraulic System
966H Wheel Loader and 972H
Wheel Loader Electrohydraulic System
Position Sensor for the Tilt Linkage (Operator Monitor) - Calibrate
966H Wheel Loader and 972H
Wheel Loader Electrohydraulic System
966H Wheel Loader and 972H
Wheel Loader Electrohydraulic System
Position Sensor (Left Brake Pedal) (Electronic Technician) - Calibrate
966H Wheel Loader and 972H
Wheel Loader Power Train
966H Wheel Loader and 972H
Wheel Loader Power Train
Position Sensor (Left Brake Pedal) (Operator Monitor) - Calibrate
966H Wheel Loader and 972H
Wheel Loader Power Train
966H Wheel Loader and 972H
Wheel Loader Power Train
Troubleshooting
Disassembly and Assembly
Inlet Air Temperature Sensor - Remove and Install
C11 and C13 Engines for Caterpillar Built Machines
C11 and C13 Engines for Caterpillar Built Machines
Lift Position Sensor and Mounting (Lift Kickout Control) - Remove and Install
966H and 972H Wheel Loaders Machine Systems
966H and 972H Wheel Loaders Machine Systems
Service Magazine
