OPERATOR STATION
CONTROL GP-ELECTROHYDRAULICCONTROL GP-HANDLE
MONITOR GP
CONTROL GP-STEERING
CONTROL GP-TRANSMISSION
OPERATOR STATION
CONTROL GP-ELECTROHYDRAULIC
#SEBC14540510
326-3193: CONTROL GP-ELECTROHYDRAULIC
For full view, you need register
Parts for your 988H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 4E-8722 | [4] | NUT (RETAINER) | |
| 2. | 140-5945 | [1] | FILM-IDENTIFICATION (HORN) | |
| 3. | 189-2077 | [1] | FILM-IDENTIFICATION (LIFT, FLOAT, LOWER) | |
| 4. | 189-2078 | [1] | FILM-IDENTIFICATION (DUMP, TILT BACK) | |
| 5. | 189-2079 | [1] | FILM-INSTRUCTION (MAINTENANCE) | |
| 6. | 201-5563 | [1] | FILM-IDENTIFICATION (AUXILIARY HYDRAULIC) | |
| 7. | 245-6447 | [1] | CUSHION AS | |
| 8. | 247-4969 | [1] | PLATE | |
| 9. | 262-5237 | [1] | COVER | |
| 10. | 262-5239 | [1] | HOUSING AS | |
| 11. | 262-5240 | [1] | PLATE AS | |
| 12. | 349-2531 | [1] | SWITCH AS-ROCKER (24-VOLT) | |
| 13. | 272-9896 | [1] | FILM-IDENTIFICATION (THROTTLE LOCK SET) | |
| 14. | 272-9897 | [1] | FILM-INFORMATION (THROTTLE LOCK RESUME) | |
| 15. | 307-4671 Y | [1] | CONTROL GP-HANDLE (PILOT CONTROL) | |
| 16. | 6R-7653 M | [2] | SCREW (M6X1X15-MM) | |
| 17. | 8T-4205 | [2] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 18. | 8T-4970 M | [2] | BOLT (M6X1X14-MM) | |
| 19. | 9X-2038 | [4] | WASHER (7X19X2-MM THK) | |
| 20. | 9X-2044 M | [21] | SCREW-TRUSS HEAD (M6X1X16-MM) | |
| 21. | 9X-2045 M | [4] | SCREW-TRUSS HEAD (M6X1X20-MM) | |
| 22. | 6V-3987 D | SEAL (0.07-M EACH) | ||
| D | ORDER BY THE METER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBC14540511
307-4671: CONTROL GP-HANDLE
307-4671 CONTROL GP-HANDLE -BUCKET
S/N BXY1-UP
PART OF 326-3193 CONTROL GP-ELECTROHYDRAULIC, 2Q-8775 CONVERSION GP-CONTROL VALVE
FIELD REPLACEMENT ORDER 361-6015 CONTROL GP-HANDLE
S/N BXY1-UP
PART OF 326-3193 CONTROL GP-ELECTROHYDRAULIC, 2Q-8775 CONVERSION GP-CONTROL VALVE
FIELD REPLACEMENT ORDER 361-6015 CONTROL GP-HANDLE
For full view, you need register
#SEBC14540512
103-5526: CONTROL GP-MONITOR
103-5526 CONTROL GP-MONITOR -BACKLIGHT DIMMER
S/N BXY1-UP
PART OF 261-0400 WIRING GP-CAB
S/N BXY1-UP
PART OF 261-0400 WIRING GP-CAB
For full view, you need register
Parts for your 988H WHEEL LOADER:
CATERPILLAR SIS#SEBC14540513
228-6563: CONTROL GP-MONITOR
228-6563 CONTROL GP-MONITOR -PAYLOAD
S/N BXY1-UP
PART OF 2Q-8586 CONVERSION AR-PAYLOAD CONTROL
S/N BXY1-UP
PART OF 2Q-8586 CONVERSION AR-PAYLOAD CONTROL
For full view, you need register
Parts for your 988H WHEEL LOADER:
CATERPILLAR SIS#SEBC14540514
283-1604: CONTROL GP-MONITOR
283-1604 CONTROL GP-MONITOR -PAYLOAD
S/N BXY1-5627
PART OF 2Q-8586 CONVERSION AR-PAYLOAD CONTROL
S/N BXY1-5627
PART OF 2Q-8586 CONVERSION AR-PAYLOAD CONTROL
For full view, you need register
Parts for your 988H WHEEL LOADER:
CATERPILLAR SIS#SEBC14540515
141-8802: CONTROL GP-STEERING
141-8802 CONTROL GP-STEERING -HMU STEERING
S/N BXY1-UP
PART OF 278-2331 CAB AR
Type 1
S/N BXY1-UP
PART OF 278-2331 CAB AR
Type 1
For full view, you need register
Parts for your 988H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 2T-3360 | [1] | BUTTON AS-HORN | |
| 2. | 8R-2918 | [1] | KNOB AS | |
| 3. | 105-3477 M | [1] | BOLT-SOCKET HEAD (M10X1.5X45-MM) | |
| 4. | 123-6713 | [1] | WEDGE | |
| 5. | 124-0065 | [1] | BLOCK | |
| 6. | 141-8808 | [1] | COVER AS (RH) | |
| 7. | 141-8811 | [1] | COVER AS (LH) | |
| 8. | 144-0896 | [1] | BRACKET AS | |
| 8T-3490 M | [4] | NUT-WELD (M10X1.5-THD) | ||
| 9. | 146-3793 | [1] | STEERING WHEEL | |
| 10. | 223-3667 CY | [1] | STEERING COLUMN GP-ADJUSTABLE | |
| 11. | 255-8545 | [2] | WASHER-RUBBER (21.5X55X2-MM THK) | |
| 12. | 291-5392 | [1] | BOOT (HMU) | |
| 13. | 099-7241 | [1] | WASHER-HARD (19X34X3-MM THK) | |
| 14. | 6V-5683 M | [4] | BOLT (M6X1X16-MM) | |
| 15. | 8T-1159 M | [4] | BOLT-SOCKET HEAD (M10X1.5X25-MM) | |
| 16. | 8T-4121 | [10] | WASHER-HARD (11X21X2.5-MM THK) | |
| 17. | 8T-4136 M | [4] | BOLT (M10X1.5X25-MM) | |
| 18. | 8T-4185 M | [2] | BOLT (M10X1.5X50-MM) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBC14540516
141-8802: CONTROL GP-STEERING
141-8802 CONTROL GP-STEERING -HMU STEERING
S/N BXY1-UP
PART OF 278-2331 CAB AR
Type 2
S/N BXY1-UP
PART OF 278-2331 CAB AR
Type 2
For full view, you need register
Parts for your 988H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 322-8568 | [1] | BUTTON AS-HORN | |
| 2. | 8R-2918 | [1] | KNOB AS | |
| 8T-4244 M | [1] | NUT (M12X1.75-THD) | ||
| 3. | 105-3477 M | [1] | BOLT-SOCKET HEAD (M10X1.5X45-MM) | |
| 4. | 123-6713 | [1] | WEDGE | |
| 5. | 124-0065 | [1] | BLOCK | |
| 6. | 141-8808 | [1] | COVER AS (RH) | |
| 7. | 141-8811 | [1] | COVER AS (LH) | |
| 8. | 144-0896 | [1] | BRACKET AS | |
| 8T-3490 M | [4] | NUT-WELD (M10X1.5-THD) | ||
| 9. | 363-5911 | [1] | STEERING WHEEL AS | |
| 363-6423 | [1] | PLUG | ||
| 10. | 297-4926 Y | [1] | STEERING COLUMN GP-ADJUSTABLE | |
| 13. | 174-8131 M | [3] | SCREW-TRUSS HEAD (M4X0.7X12-MM) | |
| 14. | 6V-5683 M | [4] | BOLT (M6X1X16-MM) | |
| 15. | 8T-1159 CM | [4] | BOLT-SOCKET HEAD (M10X1.5X25-MM) | |
| 16. | 8T-4121 | [10] | WASHER-HARD (11X21X2.5-MM THK) | |
| 17. | 8T-4136 M | [4] | BOLT (M10X1.5X25-MM) | |
| 18. | 8T-4185 M | [2] | BOLT (M10X1.5X50-MM) | |
| 19. | 361-2566 | [1] | COVER | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBC14540517
121-9300: CONTROL GP-TRANSMISSION
For full view, you need register
Parts for your 988H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 134-1374 M | [4] | BOLT-SOCKET HEAD (M5X0.8X20-MM) | |
| 2. | 201-0212 CY | [1] | CONTROL GP-TRANSMISSION (HMU STEERING) | |
| 3. | 3S-2093 | [1] | STRAP-CABLE | |
| 4. | 4P-7581 | [1] | CLIP (LADDER) | |
| 5. | 7K-1181 | [1] | STRAP-CABLE | |
| 6. | 8T-4121 | [1] | WASHER-HARD (11X21X2.5-MM THK) | |
| 7. | 8T-4137 M | [1] | BOLT (M10X1.5X20-MM) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBC14540518
121-9300: CONTROL GP-TRANSMISSION
For full view, you need register
Parts for your 988H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 134-1374 M | [4] | BOLT-SOCKET HEAD (M5X0.8X20-MM) | |
| 2. | 299-5840 CY | [1] | CONTROL GP-TRANSMISSION (HMU STEERING) | |
| 3. | 3S-2093 | [1] | STRAP-CABLE | |
| 4. | 4P-7581 | [1] | CLIP (LADDER) | |
| 5. | 7K-1181 | [1] | STRAP-CABLE | |
| 6. | 8T-4121 | [1] | WASHER-HARD (11X21X2.5-MM THK) | |
| 7. | 8T-4137 M | [1] | BOLT (M10X1.5X20-MM) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBC14540519
121-9300: CONTROL GP-TRANSMISSION
For full view, you need register
Parts for your 988H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 134-1374 M | [4] | BOLT-SOCKET HEAD (M5X0.8X20-MM) | |
| 2. | 462-1016 CY | [1] | CONTROL GP-TRANSMISSION | |
| 3. | 3S-2093 | [1] | STRAP-CABLE | |
| 4. | 4P-7581 | [1] | CLIP (LADDER) | |
| 5. | 7K-1181 | [1] | STRAP-CABLE | |
| 6. | 8T-4121 | [1] | WASHER-HARD (11X21X2.5-MM THK) | |
| 7. | 8T-4137 M | [1] | BOLT (M10X1.5X20-MM) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
Information:
OPERATOR STATION
CONTROL GP-ELECTROHYDRAULIC
Operation and Maintenance Manual
Special Instruction
Procedure to Service Boot on the Single Axis Lever (SAL) Handle Control Group of Certain Cat<SUP>®</SUP> Products {5063, 5705, 5734}
Procedure to Service Boot on the Single Axis Lever (SAL) Handle Control Group of Certain Cat® Products {5063, 5705, 5734}
Procedure to Service Boot on the Single Axis Lever (SAL) Handle Control Group of Certain Cat® Products {5063, 5705, 5734}
Specifications
Testing and Adjusting
Position Sensor for the Control Lever (Electronic Technician) - Calibrate
988H Wheel Loader Electrohydraulic System
988H Wheel Loader Electrohydraulic System
Position Sensor for the Control Lever (Operator Monitor) - Calibrate
988H Wheel Loader Electrohydraulic System
988H Wheel Loader Electrohydraulic System
Position Sensor for the Control Lever (Electronic Technician) - Calibrate
988H Wheel Loader Electrohydraulic System
988H Wheel Loader Electrohydraulic System
Troubleshooting
Disassembly and Assembly
Service Magazine
New Boot Kit Is Now Used on the Single Axis Lever (SAL) Handle Control Group of Certain Cat<SUP>®</SUP> Products {5063, 5705, 5734}
New Boot Kit Is Now Used on the Single Axis Lever (SAL) Handle Control Group of Certain Cat® Products {5063, 5705, 5734}
New Boot Kit Is Now Used on the Single Axis Lever (SAL) Handle Control Group of Certain Cat® Products {5063, 5705, 5734}
