114-1268 VALVE GP-SEQUENCE -FLOAT S/N AXG1-UP PART OF 144-0115 VALVE GP-PILOT 980G II WHEEL LOADER

Pos.	Part No	Qty	Parts name
1.	2Y-5671	[3]	WASHER (19.43X33X0.91-MM THK)
2.	6R-3354	[1]	BOOT-PROTECTION
3.	7X-1886	[1]	SWITCH AS-BALL (HYD LOCKOUT DETENT OVERRIDE)
	9B-7233	[2]	LOCKWASHER
	141-4859	[2]	SCREW-MACHINE (8-32X0.25-IN)
4.	121-0254	[1]	PLATE (6-MM THK)
5.	121-0256	[1]	PLATE (4-MM THK)
6.	140-1344	[1]	SPACER (20X25X4-MM THK)
7.	148-8867	[1]	LEVER AS
8.	156-5726 J	[1]	VALVE-SHUTOFF
9.	096-4833 M	[1]	BOLT-SOCKET HEAD (M5X0.8X20-MM)
10.	150-4086 M	[3]	SCREW (M4X0.7X16-MM)
11.	8T-4122	[1]	WASHER-HARD (17X32X3.5-MM THK)
12.	9G-5687	[1]	GROMMET
13.	9X-6165	[1]	WASHER (6.5X22X2.5-MM THK)

			AVAILABLE REPAIR KIT(S):
	112-9861 J	[1]	KIT-SEAL
			(INCLUDES 2 SEALS, 2 CONNECTOR O-RINGS, 1 THRUST RING & 1 STEM 0-RING)
	J		PART MARKED J INCLUDES KIT MARKED J
	M		METRIC PART

#SEBC14550242

6E-3373: VALVE GP-SHUTTLE

VALVE GP-SHUTTLE

6E-3373 VALVE GP-SHUTTLE
S/N AXG1-UP
PART OF 144-0115 VALVE GP-PILOT

i00678933 SEBC1455

For full view, you need register

Parts for your 980G II WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	2M-9780	[1]	SEAL-O-RING
2.	6V-3505	[1]	RING-BACKUP
3.	8C-3132	[1]	SEAL-O-RING
4.	6E-0410	[1]	SEAL-O-RING
5.	5P-2199	[1]	RING-BACKUP

#SEBC14550243

183-7595: VALVE GP-SOLENOID

VALVE GP-SOLENOID

183-7595 VALVE GP-SOLENOID
S/N AXG1-UP
PART OF 191-8735 VALVE GP-DEMAND FAN

i02230290 SEBC1455

For full view, you need register

Parts for your 980G II WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	146-3728	[1]	WASHER-SPRING
2.	187-8191	[1]	COIL AS
3.	154-4133	[1]	CARTRIDGE AS
	6V-5049	[1]	SEAL-O-RING
4.		[1]	ADAPTER AS
	7X-4776	[1]	RING-BACKUP
	8L-2786	[1]	SEAL-O-RING
	9J-0705	[1]	RING-BACKUP
	033-5879	[1]	SEAL-O-RING
	033-6033	[1]	SEAL-O-RING

#SEBC14550244

259-2298: ARM AS-LIFT

ARM AS-LIFT

259-2298 ARM AS-LIFT
S/N AXG1-UP
PART OF 255-5162 MACHINE AR

i02299533 SEBC1455

For full view, you need register

Parts for your 980G II WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	185-7220	[2]	BEARING-SLEEVE
3.	259-9404	[1]	ARM AS-LIFT
3A.	3H-2599	[2]	BLOCK-TUBE
3B.	8T-4219 M	[2]	STUD-WELD (M10X1.5X17.5-MM)
3C.	9C-7863	[1]	BLOCK
3D.	9U-2777	[2]	BOSS
3E.	117-3630	[2]	BOSS
3F.	214-9533	[2]	BOSS
4.	1V-8240	[2]	BEARING-SLEEVE
5.	1V-8241	[2]	BEARING-SLEEVE
6.	9C-4624	[1]	PLATE
	M		METRIC PART

#SEBC14550245

255-5170: AIR CONDITIONER AR

AIR CONDITIONER AR

255-5170 AIR CONDITIONER AR
S/N AXG1-UP

i02327964 SEBC1455

For full view, you need register

Parts for your 980G II WHEEL LOADER:

CATERPILLAR SIS

Part No	Qty	Parts name
172-1248 Y	[1]	COMPRESSOR GP-REFRIGERANT
267-9854 Y	[1]	CONDENSER & MTG GP-REFRIGERANT
173-0510 Y	[1]	LINES GP-AIR CONDITIONER
260-5217 Y	[1]	LINES GP-AIR CONDITIONER
175-4215 Y	[1]	WIRING GP-AIR CONDITIONER
110-6393	[1]	PLATE-INSTRUCTION (AIR CONDITIONER)

		***STANDARD REMOVAL***
172-0988 AJ	[1]	PULLEY GP-IDLER
A		NOT PART OF THIS GROUP
J		PART OF STANDARD INSTALLATION AR
Y		SEPARATE ILLUSTRATION

#SEBC14550246

157-2878: AIR CONDITIONER GP

AIR CONDITIONER GP

157-2878 AIR CONDITIONER GP
S/N AXG1-UP
PART OF 256-2736 HEATER GP-CAB

i02325721 SEBC1455

For full view, you need register

Parts for your 980G II WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3E-0400	[2]	BLOWER AS
			(EACH INCLUDES)
	037-4838	[1]	CLAMP
2.	3E-5464	[1]	THERMOSTAT (HVAC)
3.	3S-2093	[3]	STRAP-CABLE
4.	3T-2511	[2]	TUBE
5.	6T-6708	[2]	WASHER (7X28.6X4.1-MM THK)
6.	8C-3756	[1]	FILM-IDENTIFICATION (GROUP NO., SEQUENCE NO.)(AIR CONDITIONER)
7.	8C-4586	[2]	CLAMP
8.	8P-5141	[2]	PLATE-ORIFICE
9.	9G-9154	[1]	CLIP
10.	9X-2185	[4]	SCREW (8-15X0.44-IN)
11.	9X-2488	[2]	CLAMP-HOSE
12.	037-4838	[2]	CLAMP
13.	102-0340	[1]	COVER
14.	125-9740	[1]	RESISTOR
15.	131-2639	[4]	WASHER (3.2X9X0.5-MM THK)
16.	141-9784 M	[1]	BOLT (M6X1X190-MM)
17.	157-2482	[1]	CASE AS
18.		[1]	COVER AS
19.		[1]	COVER AS
20.		[1]	HOUSING AS
21.		[1]	COVER
22.		[1]	GASKET
23.		[1]	PLATE
24.		[1]	GASKET
25.		[1]	GASKET
26.		[1]	GASKET
27.		[2]	GASKET
28.		[1]	HARNESS AS-HEATER & AIR COND
	103-8134	[1]	KIT-RECEPTACLE (12-PIN)
			(INCLUDES RECEPTACLE AS AND WEDGE)
	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
			(INCLUDES PLUG AS AND WEDGE)
29.	157-2501	[1]	PAN-DRAIN
30.		[1]	BRACKET
31.		[1]	PLATE AS
32.		[1]	GASKET
33.		[1]	GASKET
34.		[1]	COIL AS-HEATER
35.	157-2523	[1]	COIL AS-EVAPORATOR
36.	174-1494	[1]	MOTOR AS-BLOWER (24-VOLT, A/C, HEATER)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS AND WEDGE)
37.	174-8145	[1]	FILTER ELEMENT-CAB AIR (AIR CONDITIONER)
38.	180-9562	[2]	LATCH AS
39.	205-4285	[1]	CONVERTER-POWER (24-VOLT TO 12-VOLT)(AIR CONDITIONER)
40.	239-5611	[1]	BRACKET AS
41.	239-9368	[1]	RESISTOR AS
42.	241-5670	[1]	VALVE AS-WATER (AIR CONDITIONER)
43.	241-7692	[1]	HARNESS AS-WIRING (VOLTAGE CONVERTER)
	155-2274	[1]	KIT-CONNECTING PLUG (6-PIN)
			(INCLUDES PLUG AS AND WEDGE)
44.	241-7693	[1]	HARNESS AS-POWER
45.	247-8272	[2]	GASKET
46.	247-8274	[1]	GASKET
47.	247-8275	[1]	GASKET
48.	247-8276	[1]	PLATE AS
49.	247-8302	[10]	RIVET
50.	033-7291	[2]	RIVET
51.	096-6166	[2]	WASHER-HARD (4.5X9X1-MM THK)
52.	129-3178 M	[16]	LOCKNUT (M6X1-THD)
53.	247-8273	[1]	GASKET
54.	5C-9553 M	[33]	BOLT (M6X1X16-MM)
55.	6V-1668	[2]	WASHER (6.5X29.1X3-MM THK)
56.	6V-7728 M	[1]	BOLT (M6X1X45-MM)
57.	6V-9671 M	[4]	SCREW-MACHINE (M3X0.5X12-MM)
58.	8T-0285 M	[2]	SCREW-MACHINE (M4X0.7X12-MM)
59.	8T-4138 M	[2]	BOLT (M6X1X20-MM)
60.	8T-4205	[53]	WASHER-HARD (7.2X14.5X2-MM THK)
61.	136-1953 E		HOSE (14-CM)
62.	6V-2496 BD		SEAL
63.	5P-5908 BD		SEAL
64.	5P-5672 BD		SEAL
	B		USE AS REQUIRED
	D		ORDER BY THE METER
	E		ORDER BY THE CENTIMETER
	M		METRIC PART

#SEBC14550247

271-9204: AIR CONDITIONER GP

AIR CONDITIONER GP

271-9204 AIR CONDITIONER GP
S/N AXG1-UP
PART OF 256-2736 HEATER GP-CAB

i03675722 SEBC1455

For full view, you need register

Parts for your 980G II WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3E-5464	[1]	THERMOSTAT (HVAC)
2.	8C-3756	[1]	FILM-IDENTIFICATION (GROUP NO., SEQUENCE NO.)(AIR CONDITIONER)
3.	134-3518	[2]	TIE-PUSH MOUNT
4.	239-9368	[1]	RESISTOR AS
5.	247-8302	[8]	RIVET
6.	257-5029	[1]	RESISTOR AS
7.	259-3222	[1]	FILTER ELEMENT-AIR (CAB)
8.	299-4728	[1]	CASE AS
	6V-9632 M	[17]	NUT-WELD (M6X1-THD)
	8T-3490 M	[5]	NUT-WELD (M10X1.5-THD)
	9X-2032 M	[4]	NUT-WELD (M4X0.7-THD)
9.	275-6658 Y	[1]	PAN GP-DRAIN (AIR CONDITIONER)
10.	275-6660	[1]	HARNESS AS-MOTOR (AIR CONDITIONER)
	5P-4571	[2]	TERMINAL-BLADE (14-GA TO 16-GA)
	065-5071	[4]	TERMINAL-BLADE
	166-5229	[1]	KIT-RECEPTACLE (12-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	2U-4729	[1]	GROMMET-BLIND
	186-3735	[7]	PIN-CONNECTOR (16-GA TO 18-GA)
	186-3736	[2]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	8T-8737	[2]	PLUG-SEAL
	9V-2818	[1]	GROMMET
	9W-0844	[2]	SOCKET-CONNECTOR (14-GA)
	9W-0852	[3]	PIN-CONNECTOR (14-GA)
	100-6674	[3]	SEAL-CONNECTOR
	119-3662 E		TUBE-HEAT SHRINK (10.85-MM DIA)(20-CM)
	155-2270	[2]	KIT-CONNECTING PLUG (2-PIN)
			(EACH PLUG KIT INCLUDES PLUG AS, INTERFACE SEAL & WEDGE)
11.	275-6682 J	[1]	GASKET
12.	275-6687 J	[1]	GASKET
13.	275-6688 J	[1]	GASKET
14.	275-6689 J	[1]	GASKET
15.	275-6690 Y	[1]	COIL GP-HEATER
16.	275-6697 J	[1]	GASKET
17.	275-6699 J	[2]	GASKET
18.	275-6701	[1]	COIL AS-EVAPORATOR
19.	275-6702	[1]	PLATE AS
20.	275-6704 J	[2]	GASKET
21.	153-6932 J	[1]	GASKET
22.	275-6706	[1]	MOTOR-BLOWER (24-VOLT)
23.	275-6708	[1]	PLATE
24.	275-6709	[1]	PLATE
25.	275-6710	[1]	RETAINER (PUSH ON)
26.	096-4034 M	[1]	BOLT-WING (M6X1X15-MM)
27.	096-6166	[10]	WASHER-HARD (4.5X9X1-MM THK)
28.	3B-4501	[2]	LOCKWASHER
29.	5C-9553 M	[21]	BOLT (M6X1X16-MM)
30.	8C-8514	[2]	SCREW-MACHINE (8-32X0.375-IN)
31.	8T-0337 M	[10]	SCREW-MACHINE (M4X0.7X12-MM)
33.	8T-4205	[22]	WASHER-HARD (7.2X14.5X2-MM THK)
34.	292-2905	[1]	PLATE AS
	6V-9632 M	[3]	NUT-WELD (M6X1-THD)
	9X-2032 M	[8]	NUT-WELD (M4X0.7-THD)

			AVAILABLE REPAIR KIT(S):
	294-8679 J	[1]	KIT-GASKET (AIR CONDITIONER)
			(INCLUDES ADDITIONAL GASKETS)
	E		ORDER BY THE CENTIMETER
	J		KIT MARKED J SERVICES PART(S) MARKED J
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBC14550248

256-2643: CAB AR

CAB AR

256-2643 CAB AR -CUSTOM
S/N AXG1-UP
PART OF 255-5972 OPERATOR AR

i02322715 SEBC1455

For full view, you need register

Parts for your 980G II WHEEL LOADER:

CATERPILLAR SIS

Part No	Qty	Parts name
256-2644 Y	[1]	BRAKE GP-MECH CALIPER PARKING
199-2831 Y	[1]	CONTROL GP-FOOT BRAKE
185-0582 Y	[1]	CONTROL GP-PILOT OPERATED HYD (2-FUNCTION)
185-9888 Y	[1]	CONTROL GP-STEERING
256-2646 Y	[1]	DUCT GP-CAB AIR
256-2947 Y	[1]	GUARD GP-WINDOW
256-2736 Y	[1]	HEATER GP-CAB
256-2742 Y	[1]	LIGHTING GP-FLOOD
256-2757 Y	[1]	LINER GP-CAB
256-2950 Y	[1]	MIRROR GP-REAR VIEW (EXTERIOR)
256-2759 Y	[1]	PANEL GP-INSTRUMENT (LOWER)
256-2780 Y	[1]	PANEL GP-INSTRUMENT (UPPER)
207-1759 Y	[1]	PEDAL GP-GOVERNOR
256-2789 Y	[1]	ENCLOSURE GP-CAB
256-2926 Y	[1]	SEAT GP-SUSPENSION
256-2929 Y	[1]	SUPPORT GP-HYDRAULIC CONTROL
256-2946 Y	[1]	WIPER GP-WINDOW
256-2948 Y	[1]	WIRING GP-CAB
Y		SEPARATE ILLUSTRATION

#SEBC14550249

275-6690: COIL GP-HEATER

COIL GP-HEATER

275-6690 COIL GP-HEATER
S/N AXG1-UP
PART OF 271-9204 AIR CONDITIONER GP

i03676292 SEBC1455

For full view, you need register

Parts for your 980G II WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	9X-2185	[4]	SCREW (8-15X0.44-IN)
2.	248-6772	[4]	SCREW-MACHINE (8-16X7.75-IN)
3.	275-6691 Y	[1]	VALVE GP-WATER (HEATER)
4.	275-6693	[1]	PLATE
5.	294-8679	[2]	KIT-GASKET (HEATER)
			(EACH INCLUDES GASKETS)
6.	4M-6582	[1]	SEAL-O-RING
	Y		SEPARATE ILLUSTRATION