289-3451 WIRING GP-CAB CUSTOM PART OF 288-8883 CAB AR Type 2 990H WHEEL LOADER

ELECTRICAL AND STARTING SYSTEM

WIRING GP

0. 289-3451 WIRING GP-
1. 286-3211 WIRING GP-
2. 286-3211 WIRING GP-
3. 125-1153 WIRING GP-
4. 2Q-8301 WIRING GP-
5. 286-3215 WIRING GP-
6. 194-4277 WIRING GP-

POWER TRAIN

AXLE GP

7. 241-9094 AXLE AR-FI
8. 287-1951 AXLE AR-FI
9. 2Q-8690 AXLE AR-FI
0. INFORMATION

WHEEL LOADER 990H WHEEL LOADER BWX
CUSTOM PRODUCT SUPPORT LITERATURE FOR THE 990H WHEEL LOADER BWX00001-UP (MACHINE) SEBC1474 990H BWX (2004)

ELECTRICAL AND STARTING SYSTEM

WIRING GP

361-1450 WIRING GP-BUMPER

236-5239 WIRING GP-CAB

289-3451 WIRING GP-CAB

286-3211 WIRING GP-ELECTRONICS BAY

125-1153 WIRING GP-KICKOUT & POSITIONER

2Q-8301 WIRING GP-MACHINE

286-3215 WIRING GP-RELAY PANEL

194-4277 WIRING GP-SHUTOFF

#SEBC14740030

289-3451: WIRING GP-CAB

WIRING GP-CAB

289-3451 WIRING GP-CAB
CUSTOM
PART OF 288-8883 CAB AR
Type 2

i03664820 SEBC1474

For full view, you need register

Parts for your 990H WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	2N-4698	[1]	RESISTOR
2.	2N-4699	[2]	WASHER
3.	2N-4700	[1]	BRACKET-RESISTOR
4.	2N-4721	[2]	WASHER
5.	2N-4722	[1]	BOLT
6.	2Q-8280	[1]	HARNESS AS-CAB (CONSOLE, RH)
	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
	155-2271	[1]	KIT-CONNECTING PLUG (4-PIN)
			(EACH KIT INCLUDES A PLUG AS & WEDGE)
7.		[1]	PLATE
8.		[1]	PLATE
9.		[1]	GASKET
10.	3E-5165	[1]	CAP AS-PROTECTION
11.	3E-5169	[2]	GUARD-SWITCH
12.	3E-5239	[1]	RELAY AS (24-VOLT)
13.	8F-1434	[1]	LOCKWASHER
14.	030-7622	[2]	SPACER (7/16-IN THK)
15.	189-3158 C	[2]	SUPPRESSOR-ARC
16.	132-8488	[1]	NUT-RING
17.		[1]	FILM-NOTICE (TRANSMISSION OVERRIDE CONTROL)
18.	270-8742	[1]	HARNESS AS-CAB
	102-8804	[1]	KIT-RECEPTACLE (4-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	155-2271	[1]	KIT-CONNECTING PLUG (4-PIN)
			(INCLUDES PLUG AS & WEDGE)
19.		[1]	PLATE AS
	8T-3490 M	[2]	NUT-WELD (M10X1.5-THD)
20.		[1]	COVER
21.	129-2093	[1]	GROMMET
22.	131-4890	[1]	GASKET
23.	143-3000	[1]	SWITCH AS-TOGGLE (TRANSMISSION OVERRIDE CONTROL)
23A.	143-3000	[1]	SWITCH AS-TOGGLE (TRANSMISSION OVERRIDE CONTROL)
			(EACH SWITCH INCLUDES)
	3L-8187	[12]	LOCKWASHER
	6T-3631	[2]	NUT-HEX (15/32-32-THD)
	6T-3632	[1]	LOCKWASHER
	6T-3633	[1]	RING-LOCKING
	6V-8374	[12]	SCREW-MACHINE (6-32X0.25-IN)
24.	2L-6391	[2]	SCREW-ROUND HEAD
25.	3E-8020 M	[2]	SCREW-TRUSS HEAD (M6X1X25-MM)
26.	4B-2043	[4]	NUT (8-32-THD)
27.	4P-4251	[1]	GASKET
28.	5C-2890 M	[1]	NUT (M6X1-THD)
29.	6B-4540	[4]	NUT (4-40-THD)
30.	7S-1197	[2]	SCREW-MACHINE (8-32X0.5-IN)
31.	8C-8560	[8]	SCREW-LOCK (4-40X0.5-IN)
32.	8L-5832	[1]	NUT-HEX (10-32-THD)
33.	130-5300 C	[2]	CLIP
34.	8M-2770	[4]	CLIP (LOOP)
35.	8T-4121	[1]	WASHER-HARD (11X21X2.5-MM THK)
36.	8T-4133 M	[2]	NUT (M10X1.5-THD)
37.	8T-4137 M	[2]	BOLT (M10X1.5X20-MM)
38.	8T-4171 M	[1]	BOLT (M6X1X12-MM)
39.	8T-4224	[4]	WASHER-HARD (8.8X16X2-MM THK)
40.	8T-4896	[3]	WASHER-HARD (10.2X18.5X2.5-MM THK)
41.	8T-4908 M	[4]	BOLT (M8X1.25X25-MM)
42.	9B-7233	[4]	LOCKWASHER
43.	9X-2043 M	[2]	SCREW-TRUSS HEAD (M6X1X14-MM)
44.	9X-8256	[1]	WASHER (6.6X12X2-MM THK)
	C		CHANGE FROM PREVIOUS TYPE
	M		METRIC PART

#SEBC14740031

286-3211: WIRING GP-ELECTRONICS BAY

WIRING GP-ELECTRONICS BAY

286-3211 WIRING GP-ELECTRONICS BAY
S/N BWX1-678
PART OF 286-3215 WIRING GP-RELAY PANEL

i02652176 SEBC1474

2863211 WIRING GP-ELECTRONICS BAY Parts scheme

For full view, you need register

Parts for your 990H WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3D-2435	[2]	GASKET
2.	3E-5239	[1]	RELAY AS (24-VOLT)(INSTRUMENT PANEL BACKLIGHTS)
2A.	3E-5239	[1]	RELAY AS (24-VOLT)(HORN)
2B.	3E-5239	[1]	RELAY AS (24-VOLT)(AIR CONDITIONER PRECLEANER)
2C.	3E-5239	[1]	RELAY AS (24-VOLT)(ROPS HID FLOODLIGHTS)
2D.	3E-5239	[1]	RELAY AS (24-VOLT)(FENDER HID FLOODLIGHTS)
2E.	3E-5239	[1]	RELAY AS (24-VOLT)(FENDER FLOODLIGHTS)
3.	6I-1418	[4]	SPACER (8.2X12.7X28.7-MM THK)
4.	7I-3652	[1]	STRIP
5.	7V-9275	[1]	STRAP
6.	8T-3518	[2]	NUT-FULL (1/2-13-THD)
7.	8T-9655	[8]	MOUNT-ISOLATION
8.	9U-2277	[1]	CLIP AS
9.	9W-1441	[6]	FUSE (15-AMPERE)
10.	9W-1442	[23]	FUSE (10-AMPERE)
11.	9W-1446	[3]	FUSE (20-AMPERE)
12.	9X-6772	[38]	STRAP-CABLE
13.	102-1529	[2]	FILM-INSTRUCTION (ELECTRICAL DISCONNECT)
14.	106-8704	[3]	SUPPRESSOR AS-ARC
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	3E-3365	[1]	WEDGE-RECEPTACLE LOCK (2-PIN)
	186-3735	[1]	PIN-CONNECTOR (16-GA TO 18-GA)
15.	115-9346	[1]	PLATE-IDENTIFICATION (CIRCUIT BREAKER)
16.	118-9587	[1]	CAM-LATCH
17.	125-1302 Y	[1]	SWITCH GP-MAGNETIC (24-VOLT)(START RELAY, SECONDARY)
17A.	125-1302 Y	[1]	SWITCH GP-MAGNETIC (24-VOLT)(START RELAY, PRIMARY)
18.	172-9389 Y	[1]	CONTROL GP-UNPROGRAMMED (POWER TRAIN)
19.	174-6381	[1]	LATCH AS
20.	187-8674	[1]	BLOCK AS-JUNCTION
21.	187-8675	[1]	GASKET
22.	202-4327	[1]	PULLER-FUSE
23.	234-5925	[1]	GASKET
24.	241-8368 Y	[1]	SWITCH GP-MAGNETIC (24-VOLT)(MAIN RELAY)
25.	267-3064	[1]	HARNESS AS-PANEL
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
	102-8801	[1]	KIT-RECEPTACLE (12-PIN)
			(EACH KIT RECEPTACLE INCLUDES RECEPTACLE AS & WEDGE)
	3E-5519	[2]	PLUG AS-CONNECTOR (5-PIN)
	110-6846	[1]	PLUG AS-CONNECTOR (40-PIN)
	1U-9053	[1]	CAPSULE-LUBRICANT
	110-6844	[1]	SEAL
	3T-3410	[1]	RECEPTACLE AS-CONNECTOR (37-PIN)
	8N-1522	[1]	NUT (2-1/4-16-THD)
	8N-1517	[1]	RECEPTACLE AS-CONNECTOR (25-PIN)
	8N-1522	[1]	NUT (2-1/4-16-THD)
	9X-1054	[4]	PLUG AS-CONNECTOR (4-PIN)
	9X-6772	[15]	STRAP-CABLE
	110-6848	[1]	PLUG AS-CONNECTOR (40-PIN)
	1U-9053	[1]	CAPSULE-LUBRICANT
	110-6844	[1]	SEAL
	155-2255	[1]	KIT-CONNECTING PLUG (12-PIN)
	155-2270	[5]	KIT-CONNECTING PLUG (2-PIN)
			(EACH KIT PLUG INCLUDES PLUG AS & WEDGE)
	188-6253	[1]	BLOCK GP-JUNCTION
	1H-3244	[2]	LOCKWASHER
	6V-8185	[2]	NUT (1/4-20-THD)
	8T-4205	[2]	WASHER-HARD (7.2X14.5X2-MM THK)
	151-1398	[3]	KIT-TERMINAL (LOCK)
	200-8789	[1]	SEAL
	214-4208	[1]	RECEPTACLE AS-CONNECTOR (70-PIN)
26.	267-8478	[1]	PLATE AS
	7T-1099	[3]	LINK
27.	269-7583	[3]	TUBE
28.	269-8306	[1]	FILM-IDENTIFICATION (FUSE PANEL)
29.	269-9156	[1]	DOOR AS-ACCESS
	8R-2566	[2]	HINGE
30.	269-9173	[1]	COVER
31.	270-3258	[1]	FILM-IDENTIFICATION (BATTERY POWER DISCONNECT)
32.	278-7109	[1]	COVER
33.	286-3213	[1]	ENCLOSURE GP-ELECTRONICS BAY
	269-9215	[1]	ENCLOSURE GP-ELECTRONICS BAY
	4E-8266 M	[4]	BOSS (M6X1X19-MM)
	6V-9632 M	[3]	NUT-WELD (M6X1-THD)
	8T-3490 M	[10]	NUT-WELD (M10X1.5-THD)
	8T-3635 M	[2]	STUD-WELD (M12X1.75X34.93-MM)
	8T-4897	[4]	WASHER (10.2X35X6-MM THK)
	8T-4967 M	[1]	STUD-WELD (M10X1.5X23-MM)
	8T-8874 M	[4]	NUT-WELD (M5X0.8-THD)
	8X-4245 M	[6]	BOSS (M6X1X18-MM)
	8X-5147 M	[1]	BLOCK (M10X1.5-MM)
	9R-9282 M	[1]	BOSS (M10X1.5-THD)
	110-2570	[3]	CAP
34.	286-3214 Y	[1]	HARNESS AS-PANEL (HYDRAULIC FAN VALVE SIGNAL)
35.	107-3727	[4]	SCREW-PAN HEAD
36.	140-7684	[1]	RECEPTACLE AS-CONNECTOR (3-PIN)
37.	170-5632 M	[4]	BOLT (M4X0.7X16-MM)
38.	171-2212	[2]	CIRCUIT BREAKER AS (105-AMPERE)(MAIN)
			(EACH INCLUDES)
	6V-8187	[2]	NUT (1/4-28-THD)
	8T-4205	[2]	WASHER-HARD (7.2X14.5X2-MM THK)
	253-2111	[2]	LOCKWASHER
39.	3D-9799	[6]	SCREW-MACHINE (8-32X0.875-IN)
40.	3T-2662	[1]	CIRCUIT BREAKER AS (15-AMPERE, AUTOMATIC RESET)(RUNNING LIGHTS)
	6V-8376	[2]	SCREW-MACHINE (8-32X0.25-IN)
	9B-7233	[2]	LOCKWASHER
41.	4B-1240	[4]	SCREW-MACHINE (10-32X1-IN)
42.	4B-4274	[4]	WASHER (5.5X13X1.2-MM THK)
43.	4P-7581	[1]	CLIP (LADDER)
44.	4P-8134	[1]	CLIP (LADDER)
45.	6T-3642	[1]	CIRCUIT BREAKER AS (10-AMPERE)(KEY SWITCH)
	6V-8376	[2]	SCREW-MACHINE (8-32X0.25-IN)
	9B-7233	[2]	LOCKWASHER
46.	6T-3643	[1]	CIRCUIT BREAKER AS (15-AMPERE)(ENGINE ECM)
	6V-8376	[2]	SCREW-MACHINE (8-32X0.25-IN)
	9B-7233	[2]	LOCKWASHER
47.	6V-3938 M	[2]	BOLT (M10X1.5X20-MM)
48.	6V-5645	[4]	SCREW-MACHINE (10-32X0.87-IN)
49.	7F-0560	[2]	WASHER (0.516X0.938X0.101-IN THK)
50.	7X-0818 M	[4]	BOLT (M8X1.25X45-MM)
51.	7X-7729	[9]	WASHER (11X25X3-MM THK)
52.	8C-6364 M	[4]	BOLT-SOCKET HEAD (M5X0.8X14-MM)
53.	8T-0328	[4]	WASHER-HARD (5.5X10X1-MM THK)
54.	8T-2659 M		LOCKNUT (M4X0.7-THD)
55.	8T-4121	[4]	WASHER-HARD (11X21X2.5-MM THK)
56.	8T-4133 M	[1]	NUT (M10X1.5-THD)
57.	8T-4136 M	[5]	BOLT (M10X1.5X25-MM)
58.	8T-4138 M	[4]	BOLT (M6X1X20-MM)
59.	8T-4195 M	[4]	BOLT (M10X1.5X30-MM)
60.	8T-4198 M	[1]	BOLT (M10X1.5X100-MM)
61.	8T-4223	[2]	WASHER-HARD (13.5X25.5X3-MM THK)
62.	8T-4244 M	[2]	NUT (M12X1.75-THD)
63.	9N-0869	[4]	WASHER-HARD (8.8X25.5X2-MM THK)
64.	9X-2042 M	[15]	SCREW-TRUSS HEAD (M6X1X12-MM)
65.	9X-2044 M	[2]	SCREW-TRUSS HEAD (M6X1X16-MM)
66.	9X-8256	[4]	WASHER (6.6X12X2-MM THK)
67.	9Y-8079	[1]	SPACER (13.88X21.34X84-MM THK)
68.	103-2543 E		SEAL (3-CM)
69.	126-8472 E		SEAL (115-CM)
70.	177-4122 E		SEAL (219-CM)
	E		ORDER BY THE CENTIMETER
	M		METRIC PART
	R		REMANUFACTURED PART MAY BE AVAILABLE
	Y		SEPARATE ILLUSTRATION

#SEBC14740032

286-3211: WIRING GP-ELECTRONICS BAY

WIRING GP-ELECTRONICS BAY

286-3211 WIRING GP-ELECTRONICS BAY
S/N BWX679-UP
PART OF 286-3215 WIRING GP-RELAY PANEL

i05785777 SEBC1474

For full view, you need register

Parts for your 990H WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3D-2435	[2]	GASKET
2.	3E-5239	[6]	RELAY AS (24-VOLT)
3.	6I-1418	[4]	SPACER (8.2X12.7X28.7-MM THK)
4.	7I-3652	[1]	STRIP
5.	7V-9275	[1]	STRAP
6.	6V-8188 C	[2]	NUT (1/2-13-THD)
7.	8T-9655	[8]	MOUNT-ISOLATION (POWER TRAIN)
8.	9U-2277	[1]	CLIP AS
9.	9W-1441	[6]	FUSE (15-AMPERE)
10.	9W-1442	[23]	FUSE (10-AMPERE)
11.	9W-1446	[3]	FUSE (20-AMPERE)
12.	9X-6772 C	[31]	STRAP-CABLE
13.	102-1529	[2]	FILM-INSTRUCTION (ELECTRICAL DISCONNECT)
14.	115-9346	[1]	PLATE-IDENTIFICATION (CIRCUIT BREAKER)
15.	118-9587	[1]	CAM-LATCH
16.	125-1302 Y	[1]	SWITCH GP-MAGNETIC (24-VOLT)(START RELAY, SECONDARY)
16A.	125-1302 Y	[1]	SWITCH GP-MAGNETIC (24-VOLT)(START RELAY, PRIMARY)
17.	171-2212	[2]	CIRCUIT BREAKER AS (105-AMPERE)
			(EACH INCLUDES)
	8T-0122	[2]	NUT-FULL (1/4-28-THD)
	1H-3244	[2]	LOCKWASHER
	4E-5724	[2]	WASHER (7X12X1-MM THK)
18.	174-6381	[1]	LATCH AS
19.	187-8674	[1]	BLOCK AS-JUNCTION
20.	187-8675	[1]	GASKET
21.	189-3158 C	[3]	SUPPRESSOR-ARC
22.	172-9389 Y	[1]	CONTROL GP-UNPROGRAMMED (POWER TRAIN)
23.	234-5925	[1]	GASKET
24.	241-8368 Y	[1]	SWITCH GP-MAGNETIC (24-VOLT)
25.	267-8478	[1]	PLATE AS
26.	269-7583	[3]	TUBE
27.	269-8306	[1]	FILM-IDENTIFICATION (FUSE PANEL)
28.	269-9156	[1]	DOOR AS-ACCESS
28A.	8R-2566	[2]	HINGE
29.	269-9173	[1]	COVER
30.	286-3213 Y	[1]	ENCLOSURE GP-ELECTRONICS BAY
31.	270-3258	[1]	FILM-IDENTIFICATION (BATTERY POWER DISCONNECT)
32.	278-7109	[1]	COVER
33.	331-5017 CY	[1]	HARNESS AS-PANEL (MAIN)
34.	107-3727	[4]	SCREW-PAN HEAD
35.	202-4327	[1]	PULLER-FUSE
36.	3D-9799	[6]	SCREW-MACHINE (8-32X0.875-IN)
37.	3T-2662	[1]	CIRCUIT BREAKER AS (15-AMPERE, AUTOMATIC RESET)
	6V-8376	[2]	SCREW-MACHINE (8-32X0.25-IN)
	9B-7233	[2]	LOCKWASHER
38.	4B-1240	[4]	SCREW-MACHINE (10-32X1-IN)
39.	4B-4863 C	[10]	WASHER (4.7X11X1.2-MM THK)
40.	4P-7581	[1]	CLIP (LADDER)
41.	4P-8134	[1]	CLIP (LADDER)
42.	6T-3642	[1]	CIRCUIT BREAKER AS (10-AMPERE)
43.	6T-3643	[1]	CIRCUIT BREAKER AS (15-AMPERE)
			(EACH CIRCUIT BREAKER AS INCLUDES)
	6V-8376	[2]	SCREW-MACHINE (8-32X0.25-IN)
	9B-7233	[2]	LOCKWASHER
44.	6V-3938 M	[2]	BOLT (M10X1.5X20-MM)
45.	6V-5645	[4]	SCREW-MACHINE (10-32X0.87-IN)
46.	7F-0560	[2]	WASHER (0.516X0.938X0.101-IN THK)
47.	7X-0818 M	[4]	BOLT (M8X1.25X45-MM)
48.	7X-7729	[9]	WASHER (11X25X3-MM THK)
49.	8C-6364 M	[4]	BOLT-SOCKET HEAD (M5X0.8X14-MM)
50.	8T-0328	[4]	WASHER-HARD (5.5X10X1-MM THK)
51.	8T-4121	[4]	WASHER-HARD (11X21X2.5-MM THK)
52.	8T-4133 M	[1]	NUT (M10X1.5-THD)
53.	8T-4136 M	[5]	BOLT (M10X1.5X25-MM)
54.	8T-4138 M	[4]	BOLT (M6X1X20-MM)
55.	8T-4244 M	[2]	NUT (M12X1.75-THD)
56.	8T-4195 M	[4]	BOLT (M10X1.5X30-MM)
57.	8T-4198 M	[1]	BOLT (M10X1.5X100-MM)
58.	8T-4223	[2]	WASHER-HARD (13.5X25.5X3-MM THK)
59.	9N-0869	[4]	WASHER-HARD (8.8X25.5X2-MM THK)
60.	9X-2042 M	[15]	SCREW-TRUSS HEAD (M6X1X12-MM)
61.	9X-2044 M	[2]	SCREW-TRUSS HEAD (M6X1X16-MM)
62.	9X-8256	[4]	WASHER (6.6X12X2-MM THK)
63.	9Y-8079	[1]	SPACER (13.88X21.34X84-MM THK)
64.	286-3214 Y	[1]	HARNESS AS-PANEL (HYDRAULIC FAN VALVE SIGNAL)
65.	170-5632 M	[4]	BOLT (M4X0.7X16-MM)
66.	8T-2659 M	[4]	LOCKNUT (M4X0.7-THD)
67.	103-2543 E		SEAL (3-CM)
68.	126-8472 E		SEAL (115-CM)
69.	177-4122 E		SEAL (219-CM)
	C		CHANGE FROM PREVIOUS TYPE
	E		ORDER BY THE CENTIMETER
	M		METRIC PART
	R		REMANUFACTURED PART MAY BE AVAILABLE
	Y		SEPARATE ILLUSTRATION

#SEBC14740033

125-1153: WIRING GP-KICKOUT & POSITIONER

WIRING GP-KICKOUT & POSITIONER

125-1153 WIRING GP-KICKOUT & POSITIONER
PART OF 271-3216 KICKOUT & POSITIONER GP

i00893535 SEBC1474

1251153 WIRING GP-KICKOUT & POSITIONER Parts scheme

For full view, you need register

Parts for your 990H WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3E-3368	[1]	WEDGE-PLUG LOCK (3-PIN)
2.	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
3.	3E-3371	[1]	WEDGE-RECEPTACLE LOCK (3-PIN)
4.	102-8804	[1]	KIT-RECEPTACLE (4-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
5.	3E-3377	[1]	WEDGE-RECEPTACLE LOCK (4-PIN)
6.	5P-1075	[1]	WASHER-HARD (10.2X22.5X3-MM THK)
7.	5P-4295	[1]	CLIP
8.	8T-4136 M	[1]	BOLT (M10X1.5X25-MM)
9.	8T-8729	[7]	PIN-CONNECTOR (16-GA TO 18-GA)
10.	8T-8730	[3]	SOCKET-CONNECTOR (16-GA TO 18-GA)
11.	155-2260	[1]	KIT-CONNECTING PLUG (3-PIN)
			(INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
12.	9X-2383 G		HOSE (43.3-IN)
13.	6V-6203 D		TUBE-HEAT SHRINK (25.4-MM DIA)(0.1-M)
	D		ORDER BY THE METER
	G		ORDER BY THE INCH
	M		METRIC PART

#SEBC14740034

2Q-8301: WIRING GP-MACHINE

WIRING GP-MACHINE

2Q-8301 WIRING GP-MACHINE
CUSTOM
PART OF 2Q-8685, 2Q-8686 STEEL MILL AR

i03664981 SEBC1474

For full view, you need register

Parts for your 990H WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	2Q-8278	[1]	HARNESS AS-CHASSIS (TRANSMISSION)
	8T-8729	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
	8T-8730	[2]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	3E-6493	[1]	PLUG AS-CONNECTOR
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	6D-5256	[1]	PLUG AS (14-PIN)
	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
			(INCLUDES PLUG AS & WEDGE)
2.	2Q-8279	[1]	HARNESS AS-TRANSMISSION
	8T-6342 E		TUBE-HEAT SHRINK (3.2-MM DIA)(4-CM)
	6D-5256	[1]	PLUG AS (14-PIN)
	9D-5423	[1]	CONNECTOR
	131-4881	[1]	RECEPTACLE AS-CONNECTOR (7-PIN)
3.	132-8486	[1]	NUT-RING
4.	132-8488	[1]	NUT-RING
5.	289-1545 C	[1]	BRACKET
6.	0S-1594 C	[3]	BOLT (3/8-16X1-IN)
7.	8M-2770	[1]	CLIP (LOOP)
8.	7K-1181	[25]	STRAP-CABLE
9.	8C-8560	[8]	SCREW-LOCK (4-40X0.5-IN)
10.	8T-4896	[3]	WASHER-HARD (10.2X18.5X2.5-MM THK)

	2Q-0604 EF		INSULATION (143-CM)
	2S-3440 F	[2]	CLAMP-HOSE
	C		CHANGE FROM PREVIOUS TYPE
	E		ORDER BY THE CENTIMETER
	F		NOT SHOWN

#SEBC14740035

286-3215: WIRING GP-RELAY PANEL

WIRING GP-RELAY PANEL

286-3215 WIRING GP-RELAY PANEL
CUSTOM
PART OF 2Q-8684 COOLER AR-AXLE OIL

i02624160 SEBC1474

2863215 WIRING GP-RELAY PANEL Parts scheme

For full view, you need register

Parts for your 990H WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	9X-6772	[9]	STRAP-CABLE
2.	286-3211 Y	[1]	WIRING GP-ELECTRONICS BAY
3.	287-3097	[1]	HARNESS AS-PANEL (HYDRAULIC FAN VALVE TO PANEL)
	8T-8737	[1]	PLUG-SEAL
	155-2260	[1]	KIT-CONNECTING PLUG (3-PIN)
	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
	174-0503	[1]	KIT-CONNECTING PLUG (3-PIN)
			(EACH KIT INCLUDES PLUG AS & WEDGE)
4.	130-5300	[1]	CLIP
5.	4P-8134	[1]	CLIP (LADDER)
	Y		SEPARATE ILLUSTRATION

#SEBC14740036

194-4277: WIRING GP-SHUTOFF

WIRING GP-SHUTOFF

194-4277 WIRING GP-SHUTOFF
PART OF 361-1450 WIRING GP-BUMPER

i01640941 SEBC1474

For full view, you need register

Parts for your 990H WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3E-5169	[1]	GUARD-SWITCH
2.	3E-8320	[1]	PLATE-INSTRUCTION (BATTERY)
3.	7N-0719 Y	[1]	SWITCH GP-DISCONNECT (BATTERY)
4.	124-7649	[1]	PLATE-INSTRUCTION (STAIRWAY LIGHT, SHUTDOWN)
5.	139-2116	[1]	SWITCH GP-TOGGLE (GROUND LEVEL SHUTDOWN)
	3E-3371	[1]	WEDGE-RECEPTACLE LOCK (3-PIN)
	6T-3631	[2]	NUT-HEX (15/32-32-THD)
	6T-3632	[1]	LOCKWASHER
	6T-3633	[1]	RING-LOCKING
	186-3735	[3]	PIN-CONNECTOR (16-GA TO 18-GA)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
6.	147-3719	[1]	PLUG-BUTTON
7.	158-6634	[1]	SWITCH GP-TOGGLE (STAIRWAY ACCESS LIGHTS)
	3E-3377	[1]	WEDGE-RECEPTACLE LOCK (4-PIN)
	6T-3631	[2]	NUT-HEX (15/32-32-THD)
	6T-3632	[1]	LOCKWASHER
	6T-3633	[1]	RING-LOCKING
	186-3735	[3]	PIN-CONNECTOR (16-GA TO 18-GA)
	9G-3695	[1]	PLUG-SEAL
	102-8804	[1]	KIT-RECEPTACLE (4-PIN)
8.	194-4278	[1]	PLATE
	Y		SEPARATE ILLUSTRATION

#SEBC14740037

241-9094: AXLE AR-FIXED

AXLE AR-FIXED

241-9094 AXLE AR-FIXED -FRONT
PART OF 2Q-8691 AXLE AR-FIXED & OSCILLATING

i03671970 SEBC1474

For full view, you need register

Parts for your 990H WHEEL LOADER:

CATERPILLAR SIS

Part No	Qty	Parts name
152-5271 Y	[1]	AXLE GP-FIXED (FRONT)
151-6431 Y	[1]	DIFFERENTIAL & BEVEL GEAR GP
		-OR-
322-2818 Y	[1]	DIFFERENTIAL & BEVEL GEAR GP
241-9096 Y	[2]	WHEEL GP-FINAL DRIVE & BRAKE
Y		SEPARATE ILLUSTRATION

#SEBC14740038

287-1951: AXLE AR-FIXED

AXLE AR-FIXED

287-1951 AXLE AR-FIXED -FRONT
CUSTOM
PART OF 2Q-8690 AXLE AR-FIXED & OSCILLATING

i03669521 SEBC1474

For full view, you need register

Parts for your 990H WHEEL LOADER:

CATERPILLAR SIS

Part No	Qty	Parts name
151-6431 Y	[1]	DIFFERENTIAL & BEVEL GEAR GP
		-OR-
322-2818 Y	[1]	DIFFERENTIAL & BEVEL GEAR GP
152-5271 Y	[1]	AXLE GP-FIXED (FRONT)
287-1926 Y	[2]	WHEEL GP-FINAL DRIVE & BRAKE
Y		SEPARATE ILLUSTRATION

#SEBC14740039

2Q-8690: AXLE AR-FIXED & OSCILLATING

AXLE AR-FIXED & OSCILLATING

2Q-8690 AXLE AR-FIXED & OSCILLATING -EXTREME SERVICE
CUSTOM
CANNOT BE USED WITH 2Q-8684 COOLING AR-AXLE, 2Q-8691 AXLE AR-FIXED & OSCILLATING, 2Z-9958 DIFFERENTIAL GP

i02598492 SEBC1474

For full view, you need register

Parts for your 990H WHEEL LOADER:

CATERPILLAR SIS

Part No	Qty	Parts name
287-1951 Y	[1]	AXLE AR-FIXED (FRONT)
287-1950 Y	[1]	AXLE AR-OSCILLATING (REAR)
Y		SEPARATE ILLUSTRATION

Information:

ELECTRICAL AND STARTING SYSTEM

WIRING GP

Engine News

Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2010/05/13

Operation and Maintenance Manual

Battery Disconnect Switch
990H Wheel Loader

Battery or Battery Cable - Inspect/Replace
990H Wheel Loader

Circuit Breakers - Reset
990H Wheel Loader

Fuses - Replace
990H Wheel Loader

Special Instruction

Cross-Reference for Electrical Connectors {7553}
Cross-Reference for Electrical Connectors {7553}

Circuit Breaker Harness Assembly {1420}
Circuit Breaker Harness Assembly {1420}

Selecting the Correct Part Numbers for Sensors and Connectors{1439, 7553}
Selecting the Correct Part Numbers for Sensors and Connectors{1439, 7553}

Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}
Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}

Selecting Correct Part Numbers For Sensors and Adapter Harnesses for Certain Machines and Engines{1408, 1439}
Selecting Correct Part Numbers For Sensors and Adapter Harnesses for Certain Machines and Engines{1408, 1439}

Installation of CAESultra for Landfill Compactors, Motor Graders, Wheel Dozers, and Wheel Loaders{1408, 7009, 7010, 7338, 733T, 7490, 7604}
Installation of CAESultra for Landfill Compactors, Motor Graders, Wheel Dozers, and Wheel Loaders{1408, 7009, 7010, 7338, 733T, 7490, 7604}

Repair Procedure for Damaged Harness Wiring {1408}
Repair Procedure for Damaged Harness Wiring {1408}

Installation Procedure for Product Link PL421 Retrofit{7606}
Installation Procedure for Product Link PL421 Retrofit{7606}

Installation Procedure for the 192-7805 Seat Compressor Harness{1408, 7312, 7324}
Installation Procedure for the 192-7805 Seat Compressor Harness{1408, 7312, 7324}

DRCP Connector Repair Service Instruction {1408, 7553}
DRCP Connector Repair Service Instruction {1408, 7553}

Service Letter-NACD

PRODUCT SUPPORT PROGRAM FOR REMOVING AIR CONDITIONING PRESSURE SWITCHES FROM DEALER STOCK
PRODUCT SUPPORT PROGRAM FOR REMOVING AIR CONDITIONING PRESSURE SWITCHES FROM DEALER STOCK

PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING THE MAIN HARNESS AS. BOOTS ON CERTAIN 990H WHEEL LOADERS AND 844H WHEEL DOZERS
PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING THE MAIN HARNESS AS. BOOTS ON CERTAIN 990H WHEEL LOADERS AND 844H WHEEL DOZERS

Service Letter-Australia

PRODUCT SUPPORT PROGRAM FOR REMOVING AIR CONDITIONING PRESSURE SWITCHES FROM DEALER STOCK
PRODUCT SUPPORT PROGRAM FOR REMOVING AIR CONDITIONING PRESSURE SWITCHES FROM DEALER STOCK

Service Letter-CFEL

PRODUCT SUPPORT PROGRAM FOR REMOVING AIR CONDITIONING PRESSURE SWITCHES FROM DEALER STOCK
PRODUCT SUPPORT PROGRAM FOR REMOVING AIR CONDITIONING PRESSURE SWITCHES FROM DEALER STOCK

Service Letter-CSARL

PRODUCT SUPPORT PROGRAM FOR REMOVING AIR CONDITIONING PRESSURE SWITCHES FROM DEALER STOCK
PRODUCT SUPPORT PROGRAM FOR REMOVING AIR CONDITIONING PRESSURE SWITCHES FROM DEALER STOCK

Service Letter-Americas

PRODUCT SUPPORT PROGRAM FOR REMOVING AIR CONDITIONING PRESSURE SWITCHES FROM DEALER STOCK
PRODUCT SUPPORT PROGRAM FOR REMOVING AIR CONDITIONING PRESSURE SWITCHES FROM DEALER STOCK

Technical Information Bulletin

Oscillation May Cause Damage to the Sensor Harness for the Rear Axle{1408}
Oscillation May Cause Damage to the Sensor Harness for the Rear Axle{1408}

Wrong Resistor May be Installed into 176-9668 Instrument Console Gp on Certain Excavators and Wheel Loaders {1408, 1437, 6129}
Wrong Resistor May be Installed into 176-9668 Instrument Console Gp on Certain Excavators and Wheel Loaders {1408, 1437, 6129}

Specifications

Temperature Sensor (Implement, Brake Oil)
990H Wheel Loader Hydraulic System

Temperature Sensor (Torque Converter Oil)
990H Wheel Loader and 844H
Wheel Dozer Power Train

Pressure Sensor (Torque Converter Impeller Clutch Oil)
990H Wheel Loader and 844H
Wheel Dozer Power Train

Temperature Sensor (Axle Oil)
990H Wheel Loader and 844H
Wheel Dozer Power Train

Speed Sensor (Torque Converter Output)
990H Wheel Loader and 844H
Wheel Dozer Power Train

Speed Sensor (Transmission Output)
990H Wheel Loader and 844H
Wheel Dozer Power Train

Pressure Sensor (Automatic Lubrication)
988H, 988K, 990H, 990K, 992G, 992K, 993K, and 994K Wheel Loaders, and 854K Wheel Dozers Automatic Lubrication System (Hydraulic Actuated System)

Electronic Unit Injector Wiring
C27 and C32 Engines for Caterpillar Built Machines

Tool Operating Manual

Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}

Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}

Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}

Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}

Service Letter-China

PRODUCT SUPPORT PROGRAM FOR REMOVING AIR CONDITIONING PRESSURE SWITCHES FROM DEALER STOCK
PRODUCT SUPPORT PROGRAM FOR REMOVING AIR CONDITIONING PRESSURE SWITCHES FROM DEALER STOCK

Service Letter-Asia

PRODUCT SUPPORT PROGRAM FOR REMOVING AIR CONDITIONING PRESSURE SWITCHES FROM DEALER STOCK
PRODUCT SUPPORT PROGRAM FOR REMOVING AIR CONDITIONING PRESSURE SWITCHES FROM DEALER STOCK

Systems Operation

Senders
Caterpillar Monitoring System

Switches
Caterpillar Monitoring System

Sensors
Caterpillar Monitoring System

Action Lamp
Caterpillar Monitoring System

Action Alarm
Caterpillar Monitoring System

Switches
990H Wheel Loader and 844H Wheel Dozer Power Train

Sensors
990H Wheel Loader and 844H Wheel Dozer Power Train

Sensors
Payload Control System (PCS) 2.X

Pressure Switch (Refrigerant)
Air Conditioning and Heating R134a for All Caterpillar Machines

Axle Oil Cooler
990H Wheel Loader and 844H Wheel Dozer Power Train

Reuse And Salvage Guidelines

Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}

Service Letter-APD

PRODUCT SUPPORT PROGRAM FOR REMOVING AIR CONDITIONING PRESSURE SWITCHES FROM DEALER STOCK
PRODUCT SUPPORT PROGRAM FOR REMOVING AIR CONDITIONING PRESSURE SWITCHES FROM DEALER STOCK

Testing and Adjusting

Electrical Connector - Inspect
Caterpillar Monitoring System

Electrical Connector - Inspect
990H Wheel Loader and 844H Wheel Dozer Power Train

Wiring Harness (Open Circuit) - Test
Payload Control System (PCS) 2.X

Wiring Harness (Short Circuit) - Test
990H Wheel Loader and 844H Wheel Dozer Power Train

Electrical Connector - Inspect
Payload Control System (PCS) 2.X

Wiring Harness (Open Circuit) - Test
Caterpillar Monitoring System

Wiring Harness (Short Circuit) - Test
Caterpillar Monitoring System

Electric Starting System - Test
C27 and C32 Engines for Caterpillar Built Machines

System Schematic
990H Wheel Loader and 844H Wheel Dozer Power Train

Payload Electronic Control Module - Replace
Payload Control System (PCS) 2.X

Position Sensor (Lift Linkage) - Adjust
Payload Control System (PCS) 2.X

Battery (Internal Backup) - Replace
Payload Control System (PCS) 2.X

Glossary of Electrical Terms
Payload Control System (PCS) 2.X

System Schematic
Payload Control System (PCS) 2.X

Electrical Connector - Inspect
Product Link - PL522/523

Wiring Harness (Open Circuit) - Test
Product Link - PL522/523

Wiring Harness (Short Circuit) - Test
Product Link - PL522/523

Electrical Connector - Inspect
Cat^® Detect Object Detection System

Wiring Harness (Open Circuit) - Test
Cat^® Detect Object Detection System

Wiring Harness (Short Circuit) - Test
Cat^® Detect Object Detection System

Electrical Connector - Inspect
Product Link 121S/300

Wiring Harness (Open Circuit) - Test
Product Link 121S/300

Wiring Harness (Short Circuit) - Test
Product Link 121S/300

Troubleshooting

CID 0291 FMI 05 Engine Cooling Fan Solenoid open circuit
C27 and C32 Engines for Caterpillar Built Machines

CID 0291 FMI 06 Engine Cooling Fan Solenoid short to ground
C27 and C32 Engines for Caterpillar Built Machines

Electrical Connectors - Inspect
C27 and C32 Engines for Caterpillar Built Machines

CID 0174 FMI 04 Fuel Temperature short to ground
C27 and C32 Engines for Caterpillar Built Machines

CID 0091 FMI 08 Throttle Position signal abnormal
C27 and C32 Engines for Caterpillar Built Machines

MID 030 - CID 0324 - FMI 03
Caterpillar Monitoring System

MID 030 - CID 0324 - FMI 05
Caterpillar Monitoring System

MID 030 - CID 0324 - FMI 06
Caterpillar Monitoring System

CID 0110 FMI 03 Engine Coolant Temperature open/short to +batt
C27 and C32 Engines for Caterpillar Built Machines

CID 0110 FMI 04 Engine Coolant Temperature short to ground
C27 and C32 Engines for Caterpillar Built Machines

Electrical Component and Connector Locations
Caterpillar Monitoring System

Switch Circuits
Caterpillar Monitoring System

CID 1589 FMI 03 Turbo Inlet Air Pressure Sensor open/shrt to +bat
C27 and C32 Engines for Caterpillar Built Machines

MID 081 - CID 0444 - FMI 03
990H Wheel Loader and 844H Wheel Dozer Power Train

MID 081 - CID 0444 - FMI 05
990H Wheel Loader and 844H Wheel Dozer Power Train

MID 081 - CID 0070 - FMI 03
990H Wheel Loader and 844H Wheel Dozer Power Train

MID 081 - CID 0070 - FMI 04
990H Wheel Loader and 844H Wheel Dozer Power Train

MID 081 - CID 0444 - FMI 06
990H Wheel Loader and 844H Wheel Dozer Power Train

CID 0342 FMI 08 Secondary Engine Speed signal abnormal
C27 and C32 Engines for Caterpillar Built Machines

CID 0172 FMI 03 Intake Manifold Air Temp open/short to +batt
C27 and C32 Engines for Caterpillar Built Machines

CID 0172 FMI 04 Intake Manifold Air Temp short to ground
C27 and C32 Engines for Caterpillar Built Machines

CID 0262 FMI 03 5 Volt Sensor DC Power Supply short to +batt
C27 and C32 Engines for Caterpillar Built Machines

CID 0262 FMI 04 5 Volt Sensor DC Power Supply short to ground
C27 and C32 Engines for Caterpillar Built Machines

CID 0274 FMI 03 Atmospheric Pressure open/short to +batt
C27 and C32 Engines for Caterpillar Built Machines

CID 0274 FMI 04 Atmospheric Pressure short to ground
C27 and C32 Engines for Caterpillar Built Machines

Fuel Filter Differential Pressure Switch Circuit - Test
C27 and C32 Engines for Caterpillar Built Machines

CID 0100 FMI 03 Engine Oil Pressure open/short to +batt
C27 and C32 Engines for Caterpillar Built Machines

CID 0100 FMI 04 Engine Oil Pressure short to ground
C27 and C32 Engines for Caterpillar Built Machines

CID 1589 FMI 04 Turbo Inlet Air Pressure Sensor short to ground
C27 and C32 Engines for Caterpillar Built Machines

Engine Wiring Information
C27 and C32 Engines for Caterpillar Built Machines

Engine Fan Control Solenoid Circuit - Test
C27 and C32 Engines for Caterpillar Built Machines

CID 1785 FMI 03 Intake Manifold Pressure Sensor voltage high
C27 and C32 Engines for Caterpillar Built Machines

CID 1785 FMI 04 Intake Manifold Pressure Sensor voltage low
C27 and C32 Engines for Caterpillar Built Machines

CID 0174 FMI 03 Fuel Temperature open/short to +batt
C27 and C32 Engines for Caterpillar Built Machines

CID 0190 FMI 08 Engine Speed signal abnormal
C27 and C32 Engines for Caterpillar Built Machines

Engine Shutdown Switch Circuit - Test
C27 and C32 Engines for Caterpillar Built Machines

Throttle Position Sensor Circuit - Test
C27 and C32 Engines for Caterpillar Built Machines

Engine Pressure Sensor Open or Short Circuit - Test
C27 and C32 Engines for Caterpillar Built Machines

Digital Sensor Supply Circuit - Test
C27 and C32 Engines for Caterpillar Built Machines

CID 0100 FMI 10 Engine Oil Pressure Sensor abnormal rate of change
C27 and C32 Engines for Caterpillar Built Machines

MID 081 - CID 0138 - FMI 03
990H Wheel Loader and 844H Wheel Dozer Power Train

MID 081 - CID 0138 - FMI 04
990H Wheel Loader and 844H Wheel Dozer Power Train

MID 081 - CID 0191 - FMI 01
990H Wheel Loader and 844H Wheel Dozer Power Train

MID 081 - CID 0367 - FMI 03
990H Wheel Loader and 844H Wheel Dozer Power Train

MID 081 - CID 0367 - FMI 04
990H Wheel Loader and 844H Wheel Dozer Power Train

MID 081 - CID 0603 - FMI 03
990H Wheel Loader and 844H Wheel Dozer Power Train

MID 081 - CID 0603 - FMI 04
990H Wheel Loader and 844H Wheel Dozer Power Train

MID 081 - CID 0627 - FMI 03
990H Wheel Loader and 844H Wheel Dozer Power Train

MID 081 - CID 0627 - FMI 04
990H Wheel Loader and 844H Wheel Dozer Power Train

MID 081 - CID 0650 - FMI 02
990H Wheel Loader and 844H Wheel Dozer Power Train

MID 081 - CID 0826 - FMI 03
990H Wheel Loader and 844H Wheel Dozer Power Train

MID 081 - CID 0826 - FMI 04
990H Wheel Loader and 844H Wheel Dozer Power Train

MID 081 - CID 1022 - FMI 03
990H Wheel Loader and 844H Wheel Dozer Power Train

MID 081 - CID 1022 - FMI 04
990H Wheel Loader and 844H Wheel Dozer Power Train

MID 081 - CID 0650 - FMI 09
990H Wheel Loader and 844H Wheel Dozer Power Train

MID 081 - CID 0650 - FMI 12
990H Wheel Loader and 844H Wheel Dozer Power Train

Connector Locations
990H Wheel Loader and 844H Wheel Dozer Power Train

CID 1785 FMI 10 Intake Manifold Pressure Signal abnormal rate of change
C27 and C32 Engines for Caterpillar Built Machines

Electrical Component and Connector Locations
Payload Control System (PCS) 2.X

MID 074 - CID 0364 - FMI 01
Payload Control System (PCS) 2.X

MID 074 - CID 0364 - FMI 02
Payload Control System (PCS) 2.X

MID 074 - CID 0364 - FMI 08
Payload Control System (PCS) 2.X

MID 074 - CID 0769 - FMI 01
Payload Control System (PCS) 2.X

MID 074 - CID 0769 - FMI 02
Payload Control System (PCS) 2.X

MID 074 - CID 0769 - FMI 08
Payload Control System (PCS) 2.X

CID 1795 FMI 03 Turbo #2 Outlet Pressure Sensor voltage above normal
C27 and C32 Engines for Caterpillar Built Machines

CID 1795 FMI 04 Turbo #2 Outlet Pressure Sensor voltage below normal
C27 and C32 Engines for Caterpillar Built Machines

CID 1795 FMI 10 Turbo #2 Outlet Pressure Sensor abnormal rate of change
C27 and C32 Engines for Caterpillar Built Machines

CID 1796 FMI 03 Intake Manifold #2 Air Temperature Sensor voltage above normal
C27 and C32 Engines for Caterpillar Built Machines

CID 1796 FMI 04 Intake Manifold #2 Air Temperature Sensor voltage below normal
C27 and C32 Engines for Caterpillar Built Machines

CID 0827 FMI 03 Left Exhaust Temperature open/short to +batt
C27 and C32 Engines for Caterpillar Built Machines

CID 0828 FMI 03 Right Exhaust Temperature open/short to +batt
C27 and C32 Engines for Caterpillar Built Machines

CID 0827 FMI 04 Left Exhaust Temperature short to ground
C27 and C32 Engines for Caterpillar Built Machines

CID 0828 FMI 04 Right Exhaust Temperature short to ground
C27 and C32 Engines for Caterpillar Built Machines

CID 0827 FMI 08 Left Exhaust Temperature signal abnormal
C27 and C32 Engines for Caterpillar Built Machines

CID 0828 FMI 08 Right Exhaust Temperature signal abnormal
C27 and C32 Engines for Caterpillar Built Machines

Switch Circuits - Test
C27 and C32 Engines for Caterpillar Built Machines

CID 0298 FMI 03 Service Brake Pedal Switch : Voltage Above Normal
C27 and C32 Engines for Caterpillar Built Machines

CID 0298 FMI 04 Service Brake Pedal Switch : Voltage Below Normal
C27 and C32 Engines for Caterpillar Built Machines

CID 0267 FMI 03 Remote Shutdown Input open/short to +batt
C27 and C32 Engines for Caterpillar Built Machines

CID 0267 FMI 04 Remote Shutdown Input short to ground
C27 and C32 Engines for Caterpillar Built Machines

Sensors and Electrical Connectors
C27 and C32 Engines for Caterpillar Built Machines

MID 122 - CID 0269 - FMI 03
Product Link 121S/300

MID 122 - CID 0269 - FMI 04
Product Link 121S/300

Service Magazine

Dielectric Grease Should Not Be Used in Electrical Connectors {1408, 7553}
2012/05/04

Correction to Troubleshooting , "Connector Locations" {7553}
2006/05/29

Troubleshooting the Wiring Harness for the Fuel Injector {1408}
2007/06/18

An Improved Backup Alarm is Now Available {7406}
2009/01/26

A New Harness for the Implement Tilt Kick Out on the 990H Wheel Loader is Now Used {5109, 5112, 5112, 5734}
2010/01/13

Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2012/03/05

Tension Relief for Temperature Sensor Group Harness Has Been Provided On Certain Cat Product {1408, 3194, 429T}
2014/04/11

Striped Wire Is Replaced With Improved Ink Jet Identification for Legacy (Parts Service) Wire harnesses {1408}
2012/06/08

Use Conductive Fasteners for Electrical Grounding on All Cat Products {7553, 7556}
2012/05/08

Information On Battery Cables and Wire Assemblies for Assembling at Dealer Site {4459}
2012/09/21

New Cab Harness As for Cat® Object Detection System Is Now Used on Certain Wheel Loaders {1408, 7605}
2013/03/07

An Improved Routing Process is Now Available When Replacing 192-7805 Harness As in TLV1 Seat Suspensions on Certain Machines {1408, 7312, 7324}
2013/11/12

Parts are Now Available to Make Jump Start Receptacle on Cat® Product {1463}
2014/03/04

Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}
Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}

Caterpillar Parts SIS Catalog 990H :

289-3451 WIRING GP-CAB

236-5239 WIRING GP-CAB

361-1450 WIRING GP-BUMPER

275-7764 SWITCH GP-WIPER

275-7741 SWITCH GP-WIPER

241-8368 SWITCH GP-MAGNETIC

125-1302 SWITCH GP-MAGNETIC

171-3759 SWITCH GP-LIMIT

286-3211 WIRING GP-ELECTRONICS BAY

125-1153 WIRING GP-KICKOUT & POSITIONER

2Q-8301 WIRING GP-MACHINE

286-3215 WIRING GP-RELAY PANEL

194-4277 WIRING GP-SHUTOFF

241-9094 AXLE AR-FIXED

287-1951 AXLE AR-FIXED

Truck sale:

Caterpillar 990H
- Wheel loaders
HOLT OF CALIFORNIA

209.500

Caterpillar 990 H, Radlader, Bau-Und Bergbauausrüstung

119.900

Caterpillar 990H, Radlader, Bau-Und Bergbauausrüstung
- Wheel Loaders
FINNING CANADA
Canada

416,432

Caterpillar 990H, Construction
- Wheel Loaders
HASTINGS DEERING (AUSTRALIA)
Australia

96,931

Caterpillar 990H, Construction
- Wheel Loaders
HASTINGS DEERING (AUSTRALIA)
Australia