BASIC ENGINE
CYLINDER HEAD GPDAMPER GP
DRIVE GP-FAN
CYLINDER HEAD GP
FASTENER GP-ENGINE
HOUSING GP-FRONT
LIFTER GP
BASIC ENGINE
CYLINDER HEAD GP#SEBC14900030
219-5849: CYLINDER HEAD GP
Parts for your 324D FM EXCAVATOR:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 219-5847 Y | [1] | CYLINDER HEAD GP | |
2. | 133-4995 | [1] | GASKET AS-CYLINDER HEAD | |
3. | 142-7289 | [14] | FASTENER GP-CYLINDER HEAD | |
(EACH INCLUDES) | ||||
138-3252 | [1] | BOLT-12 POINT HEAD | ||
8T-3282 | [1] | WASHER-HARD (22X35X3.5-MM THK) | ||
4. | 8T-7950 M | [6] | BOLT (M10X1.5X180-MM) | |
5. | 6V-5839 | [6] | WASHER (11X21X2.5-MM THK) | |
M | METRIC PART | |||
R | REMANUFACTURED PART MAY BE AVAILABLE | |||
Y | SEPARATE ILLUSTRATION |
#SEBC14900031
300-9550: CYLINDER HEAD GP
Parts for your 324D FM EXCAVATOR:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 1W-2715 | [24] | LOCK-RETAINER | |
2. | 2A-4429 | [12] | LOCK-RETAINER | |
3. | 137-6715 | [6] | SEAT-VALVE SPRING | |
4. | 137-6718 | [6] | SPRING-VALVE (EXHAUST) | |
5. | 140-6188 | [12] | SPRING-VALVE (INLET) | |
6. | 147-8214 | [12] | SEAL-VALVE STEM (INLET) | |
7. | 147-8220 | [6] | GUIDE-VALVE (STANDARD, EXHAUST) | |
187-8278 AB | GUIDE-VALVE (0.13-MM OS) | |||
187-8279 AB | GUIDE-VALVE (0.51-MM OS) | |||
8. | 163-2478 | [6] | SEAL-VALVE STEM (EXHAUST) | |
9. | 252-7801 | [12] | VALVE-INLET | |
10. | Y | [1] | CYLINDER HEAD AS | |
11. | 134-4483 | [6] | RETAINER-SPRING | |
12. | 140-9670 | [12] | GUIDE-VALVE (STANDARD, INLET) | |
187-8280 AB | GUIDE-VALVE (0.13-MM OS) | |||
187-8281 AB | GUIDE-VALVE (0.51-MM OS) | |||
13. | 147-8211 | [6] | VALVE-EXHAUST | |
14. | 7E-7779 | [12] | RETAINER-SPRING | |
A | NOT PART OF THIS GROUP | |||
B | USE AS REQUIRED | |||
Y | SEPARATE ILLUSTRATION |
#SEBC14900032
487-2807: CYLINDER HEAD GP
Parts for your 324D FM EXCAVATOR:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 1W-2715 | [24] | LOCK-RETAINER | |
2. | 2A-4429 | [12] | LOCK-RETAINER | |
3. | 7E-7779 | [12] | RETAINER-SPRING | |
4. | 134-4483 | [6] | RETAINER-SPRING | |
5. | 137-6715 | [6] | SEAT-VALVE SPRING | |
6. | 137-6718 | [6] | SPRING-VALVE | |
7. | 140-6188 | [12] | SPRING-VALVE | |
8. | 147-8214 | [12] | SEAL-VALVE STEM | |
9. | 147-8220 | [6] | GUIDE-VALVE | |
10. | 157-7130 | [6] | VALVE-EXHAUST | |
11. | 163-2478 | [6] | SEAL-VALVE STEM | |
12. | 252-7801 | [12] | VALVE-INLET | |
13. | 487-2810 Y | [1] | CYLINDER HEAD AS | |
14. | 140-9670 | [12] | GUIDE-VALVE | |
Y | SEPARATE ILLUSTRATION |
#SEBC14900033
263-1850: DAMPER & PULLEY GP
263-1850 DAMPER & PULLEY GP
S/N KHX1-2381
PART OF 240-1859 ENGINE AR-COMPLETE
FOR USE WITH POLY-VEE FAN BELT DRIVE
S/N KHX1-2381
PART OF 240-1859 ENGINE AR-COMPLETE
FOR USE WITH POLY-VEE FAN BELT DRIVE
Parts for your 324D FM EXCAVATOR:
CATERPILLAR SIS#SEBC14900034
263-1850: DAMPER & PULLEY GP
263-1850 DAMPER & PULLEY GP
S/N KHX2382-UP
PART OF 240-1859 ENGINE AR-COMPLETE
FOR USE WITH POLY-VEE FAN BELT DRIVE
S/N KHX2382-UP
PART OF 240-1859 ENGINE AR-COMPLETE
FOR USE WITH POLY-VEE FAN BELT DRIVE
Parts for your 324D FM EXCAVATOR:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 2W-7381 | [1] | PLATE-CLAMP | |
2. | 116-6332 | [1] | SPACER-SPECIAL | |
3. | 167-8121 | [1] | DAMPER AS | |
4. | 228-3621 | [1] | SPACER (101.5X167X8-MM THK) | |
5. | 153-1036 C | [1] | PULLEY-CRANKSHAFT (8-GROOVE) | |
6. | 8T-3666 M | [4] | BOLT (M14X2X60-MM) | |
7. | 8T-5035 M | [8] | BOLT (M10X1.5X65-MM) | |
C | CHANGE FROM PREVIOUS TYPE | |||
M | METRIC PART |
#SEBC14900035
177-6973: DRIVE GP-FAN
Parts for your 324D FM EXCAVATOR:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 4W-1203 | [2] | CUP-BEARING | |
2. | 4W-1204 | [2] | CONE-BEARING | |
3. | 4W-2042 | [1] | SPACER (35.3X45.5X38.331-MM THK) | |
4. | 6V-9748 | [1] | SEAL-LIP TYPE | |
5. | 7C-8369 | [1] | HUB | |
6. | 7C-8370 | [1] | CAP-DUST | |
7. | 7C-8634 | [1] | PLATE | |
8. | 183-2854 | [1] | BRACKET AS | |
9. | 5S-9062 | [1] | SPACER (35.032X50.8X15.88-MM THK) | |
10. | 6V-8004 M | [1] | BOLT (M12X1.75X120-MM) | |
M | METRIC PART |
#SEBC14900036
258-8723: FASTENER GP-CYLINDER HEAD
258-8723 FASTENER GP-CYLINDER HEAD
S/N KHX1-UP
PART OF 240-1859 ENGINE AR-COMPLETE
S/N KHX1-UP
PART OF 240-1859 ENGINE AR-COMPLETE
Parts for your 324D FM EXCAVATOR:
CATERPILLAR SIS#SEBC14900037
252-9551: FASTENER GP-FRONT COVER
252-9551 FASTENER GP-FRONT COVER
S/N KHX1-UP
PART OF 240-1859 ENGINE AR-COMPLETE
S/N KHX1-UP
PART OF 240-1859 ENGINE AR-COMPLETE
Parts for your 324D FM EXCAVATOR:
CATERPILLAR SIS#SEBC14900038
116-4556: FASTENER GP-FRONT HOUSING
116-4556 FASTENER GP-FRONT HOUSING
S/N KHX1-UP
PART OF 240-1859 ENGINE AR-COMPLETE
CANNOT BE USED WITH FRONT ENGINE SUPPORT
S/N KHX1-UP
PART OF 240-1859 ENGINE AR-COMPLETE
CANNOT BE USED WITH FRONT ENGINE SUPPORT
Parts for your 324D FM EXCAVATOR:
CATERPILLAR SIS#SEBC14900039
113-6170: FASTENER GP-LIFTING
113-6170 FASTENER GP-LIFTING -ENGINE, REAR
S/N KHX1-UP
PART OF 240-1859 ENGINE AR-COMPLETE
FOR USE WITH @@@@@142-8100@@@@@
CANNOT BE USED WITH REMOTE FUEL FILTER
S/N KHX1-UP
PART OF 240-1859 ENGINE AR-COMPLETE
FOR USE WITH @@@@@142-8100@@@@@
CANNOT BE USED WITH REMOTE FUEL FILTER
Parts for your 324D FM EXCAVATOR:
CATERPILLAR SISInformation:
BASIC ENGINE
CYLINDER HEAD GP
Operation and Maintenance Manual
Special Instruction
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Procedure for Troubleshooting and Cleaning the Oil Rail System for the Hydraulic Electronic Unit Injector (HEUI) {1100, 1126, 1250, 1251, 1261, 1290}
Procedure for Troubleshooting and Cleaning the Oil Rail System for the Hydraulic Electronic Unit Injector (HEUI) {1100, 1126, 1250, 1251, 1261, 1290}
Procedure for Troubleshooting and Cleaning the Oil Rail System for the Hydraulic Electronic Unit Injector (HEUI) {1100, 1126, 1250, 1251, 1261, 1290}
Procedure to Improve Fuel Injectors on Certain Machine Engines {1100, 1126, 1250, 1251, 1290}
Procedure to Improve Fuel Injectors on Certain Machine Engines {1100, 1126, 1250, 1251, 1290}
Procedure to Improve Fuel Injectors on Certain Machine Engines {1100, 1126, 1250, 1251, 1290}
Specifications
Tool Operating Manual
Operating Instructions for 155-1536 Valve Recession Tool Kit for all G3500 and 3500 Engines{0374, 0599, 0701, 0703, 0759, 0767}
Operating Instructions for 155-1536 Valve Recession Tool Kit for all G3500 and 3500 Engines{0374, 0599, 0701, 0703, 0759, 0767}
Operating Instructions for 155-1536 Valve Recession Tool Kit for all G3500 and 3500 Engines{0374, 0599, 0701, 0703, 0759, 0767}
Operating Instructions for 148-2997 Valve Recession Tool Group Used On 3600, G3600, and C175 Engines{0374, 0599, 0701, 0703, 0759}
Operating Instructions for 148-2997 Valve Recession Tool Group Used On 3600, G3600, and C175 Engines{0374, 0599, 0701, 0703, 0759}
Operating Instructions for 148-2997 Valve Recession Tool Group Used On 3600, G3600, and C175 Engines{0374, 0599, 0701, 0703, 0759}
188-3922 Broken Exhaust Bolt and Stud Removal Group for 3114, 3116, 3126, 3126B, 3176, 3176B, C-10, and C12 Engines{0374, 0599, 0701, 0702, 0703}
188-3922 Broken Exhaust Bolt and Stud Removal Group for 3114, 3116, 3126, 3126B, 3176, 3176B, C-10, and C12 Engines{0374, 0599, 0701, 0702, 0703}
188-3922 Broken Exhaust Bolt and Stud Removal Group for 3114, 3116, 3126, 3126B, 3176, 3176B, C-10, and C12 Engines{0374, 0599, 0701, 0702, 0703}
CRB Valve Spring Testers 8S-2263 and 4C-9496{0374, 0599, 0700, 0701, 1108}
CRB Valve Spring Testers 8S-2263 and 4C-9496{0374, 0599, 0700, 0701, 1108}
CRB Valve Spring Testers 8S-2263 and 4C-9496{0374, 0599, 0700, 0701, 1108}
Reuse And Salvage Guidelines
Reuse and Salvage for Cylinder Head Assemblies {1100, 1101, 1103, 1104, 1105, 1106, 1108, 1109, 1115, 1117, 1121, 1124, 1125}
Reuse and Salvage for Cylinder Head Assemblies {1100, 1101, 1103, 1104, 1105, 1106, 1108, 1109, 1115, 1117, 1121, 1124, 1125}
Reuse and Salvage for Cylinder Head Assemblies {1100, 1101, 1103, 1104, 1105, 1106, 1108, 1109, 1115, 1117, 1121, 1124, 1125}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Applied Failure Analysis
Information Release Memo
CAT REMAN ADDING CYLINDER HEAD KITS FOR 3126B, C7, C10/C12 APPLICATIONS
CAT REMAN ADDING CYLINDER HEAD KITS FOR 3126B, C7, C10/C12 APPLICATIONS
CAT REMAN ADDING CYLINDER HEAD KITS FOR 3126B, C7, C10/C12 APPLICATIONS
Testing and Adjusting
Disassembly and Assembly
Cylinder Head - Remove
324D, 325D, 326D and 329D Excavators and 329D MHPU Mobile Hydraulic Power Unit C7 Engine Supplement
324D, 325D, 326D and 329D Excavators and 329D MHPU Mobile Hydraulic Power Unit C7 Engine Supplement
Cylinder Head - Install
324D, 325D, 326D and 329D Excavators and 329D MHPU Mobile Hydraulic Power Unit C7 Engine Supplement
324D, 325D, 326D and 329D Excavators and 329D MHPU Mobile Hydraulic Power Unit C7 Engine Supplement
Service Magazine
A New Exhaust Valve Is Used for CertainC7 Machine Engines {1100}
A New Exhaust Valve Is Used for CertainC7 Machine Engines {1100}
A New Exhaust Valve Is Used for CertainC7 Machine Engines {1100}