OPERATOR STATION
CONTROL GP-JOYSTICKOPERATOR STATION
CONTROL GP-JOYSTICK
#SEBC14940001
245-7649: CONTROL GP-JOYSTICK
245-7649 CONTROL GP-JOYSTICK -3-FUNCTION, WITH DOWNSHIFT
PART OF 290-3534 CONVERSION GP-JOYSTICK
PART OF 290-3534 CONVERSION GP-JOYSTICK
For full view, you need register
Parts for your 966H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 254-9140 | [1] | CONTROL GP-HANDLE (LIFT, TILT, AUX, DOWNSHIFT SW) | |
| 8T-8737 | [2] | PLUG-SEAL | ||
| 174-3091 | [1] | KIT-RECEPTACLE (12-PIN) | ||
| (INCLUDES RECEPTACLE AS AND WEDGE) | ||||
| 186-3735 | [10] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 2. | 277-7570 | [1] | BASE AS-JOYSTICK | |
| 102-8805 | [1] | KIT-RECEPTACLE (6-PIN) | ||
| (INCLUDES RECEPTACLE AS AND WEDGE) | ||||
| 186-3735 | [6] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 280-0440 M | [4] | STUD-MOUNTING (M6X1-THD) | ||
| 3. | 279-6641 | [1] | BOOT | |
| 4. | 213-7489 M | [3] | SCREW (M4X25-MM) | |
| 5. | 178-9983 M | [3] | LOCKNUT (M4X0.7-THD) | |
| 6. | 174-3091 | [1] | KIT-RECEPTACLE (12-PIN) | |
| 7. | 102-8805 | [1] | KIT-RECEPTACLE (6-PIN) | |
| (EACH KIT INCLUDES RECEPTACLE AS AND WEDGE) | ||||
| 8. | 186-3735 | [16] | PIN-CONNECTOR (16-GA TO 18-GA) | |
| 9. | 8T-8737 | [2] | PLUG-SEAL | |
| 10. | 280-0440 M | [4] | STUD-MOUNTING (M6X1-THD) | |
| 11. | 144-0331 | [1] | CAP-PUSH BUTTON (HORN) | |
| M | METRIC PART | |||
#SEBC14940002
245-7650: CONTROL GP-JOYSTICK
245-7650 CONTROL GP-JOYSTICK -2-FUNCTION, WITH DOWNSHIFT
PART OF 290-3533 CONVERSION GP-JOYSTICK
PART OF 290-3533 CONVERSION GP-JOYSTICK
For full view, you need register
Parts for your 966H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 254-9139 | [1] | CONTROL GP-HANDLE (LIFT, TILT, W/DOWNSHIFT SWITCH) | |
| 8T-8737 | [6] | PLUG-SEAL | ||
| 174-3091 | [1] | KIT-RECEPTACLE (12-PIN) | ||
| (INCLUDES RECEPTACLE AS AND WEDGE) | ||||
| 186-3735 | [6] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 2. | 277-7570 | [1] | BASE AS-JOYSTICK | |
| 102-8805 | [1] | KIT-RECEPTACLE (6-PIN) | ||
| (INCLUDES RECEPTACLE AS AND WEDGE) | ||||
| 186-3735 | [6] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 280-0440 M | [4] | STUD-MOUNTING (M6X1-THD) | ||
| 3. | 279-6641 | [1] | BOOT | |
| 4. | 213-7489 M | [3] | SCREW (M4X25-MM) | |
| 5. | 178-9983 M | [3] | LOCKNUT (M4X0.7-THD) | |
| 6. | 174-3091 | [1] | KIT-RECEPTACLE (12-PIN) | |
| 7. | 102-8805 | [1] | KIT-RECEPTACLE (6-PIN) | |
| (EACH KIT INCLUDES RECEPTACLE AS AND WEDGE) | ||||
| 8. | 186-3735 | [12] | PIN-CONNECTOR (16-GA TO 18-GA) | |
| 9. | 8T-8737 | [6] | PLUG-SEAL | |
| 10. | 280-0440 M | [4] | STUD-MOUNTING (M6X1-THD) | |
| 11. | 144-0331 | [1] | CAP-PUSH BUTTON (HORN) | |
| M | METRIC PART | |||
#SEBC14940003
290-3533: CONVERSION GP-JOYSTICK
290-3533 CONVERSION GP-JOYSTICK -2-FUNCTION, KIT
CUSTOM ONLY
CUSTOM ONLY
For full view, you need register
Parts for your 966H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 4E-8722 | [4] | NUT (RETAINER) | |
| 2. | 6V-3987 | [1] | SEAL (0.062-M EACH) | |
| 3. | 6R-7653 M | [2] | SCREW (M6X1X15-MM) | |
| 4. | 7K-1181 | [4] | STRAP-CABLE | |
| 5. | 8R-3695 | [3] | GROMMET | |
| 6. | 8T-4138 M | [1] | BOLT (M6X1X20-MM) | |
| 7. | 8T-4205 | [3] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 8. | 8T-4970 M | [2] | BOLT (M6X1X14-MM) | |
| 9. | 9X-2038 | [4] | WASHER (7X19X2-MM THK) | |
| 10. | 9X-2044 M | [9] | SCREW-TRUSS HEAD (M6X1X16-MM) | |
| 11. | 9X-2045 M | [4] | SCREW-TRUSS HEAD (M6X1X20-MM) | |
| 12. | 112-6646 M | [4] | LOCKNUT (M6X1-THD) | |
| 13. | 156-6175 | [1] | CLIP | |
| 14. | 189-2079 | [1] | FILM-INSTRUCTION (MAINTENANCE) | |
| 15. | 198-4775 | [1] | WASHER-HARD (6.6X15X6-MM THK) | |
| 16. | 245-6447 | [1] | CUSHION AS | |
| 17. | 245-7650 Y | [1] | CONTROL GP-JOYSTICK (2-FUNCTION, WITH DOWNSHIFT) | |
| 18. | 311-8345 | [1] | HARNESS AS-OPERATOR CONTROLS (ELECTROHYDRAULIC, JOYSTICK) | |
| 19. | 247-4969 | [1] | PLATE | |
| 20. | 254-9149 | [1] | FILM-CONTROL (JOYSTICK, 2-FCTN, DOWNSHIFT SW) | |
| 21. | 262-5238 | [1] | COVER | |
| 22. | 262-5239 | [1] | HOUSING AS | |
| 23. | 263-1995 | [1] | PLATE AS | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBC14940004
290-3534: CONVERSION GP-JOYSTICK
290-3534 CONVERSION GP-JOYSTICK -3-FUNCTION, KIT
CUSTOM ONLY
CUSTOM ONLY
For full view, you need register
Parts for your 966H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 4E-8722 | [4] | NUT (RETAINER) | |
| 2. | 6V-3987 | SEAL (0.062-M EACH) | ||
| 3. | 6R-7653 M | [2] | SCREW (M6X1X15-MM) | |
| 4. | 7K-1181 | [4] | STRAP-CABLE | |
| 5. | 8R-3695 | [3] | GROMMET | |
| 6. | 8T-4138 M | [1] | BOLT (M6X1X20-MM) | |
| 7. | 8T-4205 | [3] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 8. | 8T-4970 M | [2] | BOLT (M6X1X14-MM) | |
| 9. | 9X-2038 | [4] | WASHER (7X19X2-MM THK) | |
| 10. | 9X-2044 M | [9] | SCREW-TRUSS HEAD (M6X1X16-MM) | |
| 11. | 9X-2045 M | [4] | SCREW-TRUSS HEAD (M6X1X20-MM) | |
| 12. | 112-6646 M | [4] | LOCKNUT (M6X1-THD) | |
| 13. | 156-6175 | [1] | CLIP | |
| 14. | 189-2079 | [1] | FILM-INSTRUCTION (MAINTENANCE) | |
| 15. | 198-4775 | [1] | WASHER-HARD (6.6X15X6-MM THK) | |
| 16. | 245-6447 | [1] | CUSHION AS | |
| 17. | 245-7649 Y | [1] | CONTROL GP-JOYSTICK (3-FUNCTION, WITH DOWNSHIFT) | |
| 18. | 311-8345 | [1] | HARNESS AS-OPERATOR CONTROLS (ELECTROHYDRAULIC, JOYSTICK) | |
| 19. | 247-4969 | [1] | PLATE | |
| 20. | 254-9150 | [1] | FILM-CONTROL (JOYSTICK, 3-FCTN, DOWNSHIFT SW) | |
| 21. | 262-5238 | [1] | COVER | |
| 22. | 262-5239 | [1] | HOUSING AS | |
| 23. | 263-1995 | [1] | PLATE AS | |
| 24. | 256-7822 | [1] | SWITCH AS-ROCKER (24-VOLT, SEALED, ILLUMINATED)(3RD FUNCTION SELECT) | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
Information:
OPERATOR STATION
CONTROL GP-JOYSTICK
Special Instruction
Instructions for the Field Conversion to a Electrohydraulic Joystick with a Forward, Neutral and Reverse Switch{1408, 5702, 5705}
Instructions for the Field Conversion to a Electrohydraulic Joystick with a Forward, Neutral and Reverse Switch{1408, 5702, 5705}
Instructions for the Field Conversion to a Electrohydraulic Joystick with a Forward, Neutral and Reverse Switch{1408, 5702, 5705}
Procedure to Service Boot on the Single Axis Lever (SAL) Handle Control Group of Certain Cat<SUP>®</SUP> Products {5063, 5705, 5734}
Procedure to Service Boot on the Single Axis Lever (SAL) Handle Control Group of Certain Cat® Products {5063, 5705, 5734}
Procedure to Service Boot on the Single Axis Lever (SAL) Handle Control Group of Certain Cat® Products {5063, 5705, 5734}
Service Letter-NACD
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN HANDLE CONTROL GROUPS FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN HANDLE CONTROL GROUPS FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN HANDLE CONTROL GROUPS FROM DEALER PARTS STOCK
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-China
Service Letter-Asia
Custom Service Information
Instructions for Field Conversion to a Electrohydraulic Joystick{5705}
Instructions for Field Conversion to a Electrohydraulic Joystick{5705}
Instructions for Field Conversion to a Electrohydraulic Joystick{5705}
Instructions for the Field Installation of the 324-8180 Electrohydraulic Control Conversion Gp (Kit, Joystick to 2-Lever Control). and the 324-8181 Electrohydraulic Control Conversion Gp (Kit, Joystick to 3-Lever Control){5063, 5702, 5705}
Instructions for the Field Installation of the 324-8180 Electrohydraulic Control Conversion Gp (Kit, Joystick to 2-Lever Control). and the 324-8181 Electrohydraulic Control Conversion Gp (Kit, Joystick to 3-Lever Control){5063, 5702, 5705}
Instructions for the Field Installation of the 324-8180 Electrohydraulic Control Conversion Gp (Kit, Joystick to 2-Lever Control). and the 324-8181 Electrohydraulic Control Conversion Gp (Kit, Joystick to 3-Lever Control){5063, 5702, 5705}
Instructions for the Field Conversion to a Electrohydraulic Joystick with a Forward, Neutral and Reverse Switch{1408, 5702, 5705}
Instructions for the Field Conversion to a Electrohydraulic Joystick with a Forward, Neutral and Reverse Switch{1408, 5702, 5705}
Instructions for the Field Conversion to a Electrohydraulic Joystick with a Forward, Neutral and Reverse Switch{1408, 5702, 5705}
Service Letter-APD
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN HANDLE CONTROL GROUPS FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN HANDLE CONTROL GROUPS FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN HANDLE CONTROL GROUPS FROM DEALER PARTS STOCK
Testing and Adjusting
Position Sensor for the Electrohydraulic Control Levers or Joystick Control (Electronic Technician) - Calibrate
966H Wheel Loader and 972H
Wheel Loader Electrohydraulic System
966H Wheel Loader and 972H
Wheel Loader Electrohydraulic System
Position Sensor for the Joystick Control (Operator Monitor) - Calibrate
966H Wheel Loader and 972H
Wheel Loader Electrohydraulic System
966H Wheel Loader and 972H
Wheel Loader Electrohydraulic System
Troubleshooting
Service Magazine
An Improved Multi-Function Joystick is Now Available for Certain Cat<SUP>®</SUP> Machines {5063, 5702, 5705}
An Improved Multi-Function Joystick is Now Available for Certain Cat® Machines {5063, 5702, 5705}
An Improved Multi-Function Joystick is Now Available for Certain Cat® Machines {5063, 5702, 5705}
New Boot Kit Is Now Used on the Single Axis Lever (SAL) Handle Control Group of Certain Cat<SUP>®</SUP> Products {5063, 5705, 5734}
New Boot Kit Is Now Used on the Single Axis Lever (SAL) Handle Control Group of Certain Cat® Products {5063, 5705, 5734}
New Boot Kit Is Now Used on the Single Axis Lever (SAL) Handle Control Group of Certain Cat® Products {5063, 5705, 5734}
