AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

295-6544 AIR CONDITIONER KIT CUSTOM PRODUCT SUPPORT LITERATURE FOR THE 950H, 962H WHEEL LOADERS AND THE IT62H INTERGRATED TOOLCARRIER K5K00001-UP (MACHINE) BASIC ENGINE Caterpillar SIS



WHEEL LOADER 950H WHEEL LOADER K5K
 295-6544 AIR CONDITIONER KIT CUSTOM PRODUCT SUPPORT LITERATURE FOR THE 950H, 962H WHEEL LOADERS AND THE IT62H INTERGRATED TOOLCARRIER K5K00001-UP (MACHINE) SEBC1498 950H K5K   (2005)

Parts group 950H:

  For full view, you need register
BASIC ENGINE
BELT TIGHTENER GP
IDLER GP-BELT
192-1563 IDLER GP-BELT
192-1563 IDLER GP-BELT -ALTERNATOR, REFRIGERANT COMPRESSOR
PART OF 295-6544 AIR CONDITIONER GP
PULLEY GP
IDLER GP-BELT
192-1563 IDLER GP-BELT
192-1563 IDLER GP-BELT -ALTERNATOR, REFRIGERANT COMPRESSOR
PART OF 295-6544 AIR CONDITIONER GP

Information:

(For parts list, see above)

Operation and Maintenance Manual
Belt - Inspect/Adjust/Replace
IT62H Integrated Toolcarrier and 950H and 962H Wheel Loaders
Specifications
Belt Tensioner
C7 Engines for Caterpillar Built Machines
Disassembly and Assembly
Belt Tensioner - Remove and Install
IT62H Integrated Toolcarrier and
950H and 962H Wheel Loaders
C7 Engine Supplement
Specifications
Camshaft
C7 Engines for Caterpillar Built Machines
Reuse And Salvage Guidelines
Reuse and Salvage for Camshafts {1210, 1210}
Reuse and Salvage for Camshafts {1210, 1210}
Testing and Adjusting
Excessive Bearing Wear - Inspect
C7 Engines for Caterpillar Built Machines
Disassembly and Assembly
Camshaft Gear - Remove and Install
C7
Engines for Caterpillar Built Machines
Camshaft Bearings - Remove and Install
C7
Engines for Caterpillar Built Machines
Camshaft - Remove
C7
Engines for Caterpillar Built Machines
Camshaft - Install
C7
Engines for Caterpillar Built Machines
Specifications
Rear Seal Carrier
C7 Engines for Caterpillar Built Machines
Connecting Rod Bearing Journal
C7 Engines for Caterpillar Built Machines
Main Bearing Journal
C7 Engines for Caterpillar Built Machines
Crankshaft
C7 Engines for Caterpillar Built Machines
Crankshaft Seals
C7 Engines for Caterpillar Built Machines
Tool Operating Manual
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
Reuse And Salvage Guidelines
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Reuse and Salvage for Crankshafts {0674, 1202}
Reuse and Salvage for Crankshafts {0674, 1202}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
Reuse and Salvage for Engine Dampers {1202, 1205}
Reuse and Salvage for Engine Dampers {1202, 1205}
Testing and Adjusting
Main Bearings - Inspect
C7 Engines for Caterpillar Built Machines
Excessive Bearing Wear - Inspect
C7 Engines for Caterpillar Built Machines
Disassembly and Assembly
Bearing Clearance - Check
C7
Engines for Caterpillar Built Machines
Crankshaft Main Bearings - Remove
C7
Engines for Caterpillar Built Machines
Crankshaft Main Bearings - Install
C7
Engines for Caterpillar Built Machines
Crankshaft Gear - Remove and Install
C7
Engines for Caterpillar Built Machines
Crankshaft Front Seal - Remove
C7
Engines for Caterpillar Built Machines
Crankshaft Front Seal - Install
C7
Engines for Caterpillar Built Machines
Crankshaft - Remove
C7
Engines for Caterpillar Built Machines
Crankshaft - Install
C7
Engines for Caterpillar Built Machines
Crankshaft Rear Seal - Remove
C7
Engines for Caterpillar Built Machines
Crankshaft Rear Seal - Install
C7
Engines for Caterpillar Built Machines
Crankshaft Front Seal - Remove
IT62H Integrated Toolcarrier and
950H and 962H Wheel Loaders
C7 Engine Supplement
Crankshaft Front Seal - Install
IT62H Integrated Toolcarrier and
950H and 962H Wheel Loaders
C7 Engine Supplement
Service Magazine
Use the 171-7212 Wear Sleeve to Repair the Crankshaft Hub {1160}
2011/09/20
Special Instruction
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Service Letter-NACD
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN 10R4134 SHORT BLOCKS, 10R4139 SHORT BLOCKS, 10R4144 LONG BLOCKS, and 10R4145 LONG BLOCKS FROM DEALER PART STOCK.
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN 10R4134 SHORT BLOCKS, 10R4139 SHORT BLOCKS, 10R4144 LONG BLOCKS, and 10R4145 LONG BLOCKS FROM DEALER PART STOCK.
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Truck/Ag/Marine
Specifications
Cylinder Block Cover Group
C7 Engines for Caterpillar Built Machines
Main Bearing Journal
C7 Engines for Caterpillar Built Machines
Piston Cooling Jet
C7 Engines for Caterpillar Built Machines
Piston Cooling Jet
C7 Engines for Caterpillar Built Machines
Cylinder Block
C7 Engines for Caterpillar Built Machines
Cylinder Block Cover Group
C7 Engines for Caterpillar Built Machines
Tool Operating Manual
Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}
Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}
Using the 8T-2700 Blowby/Air Flow Indicator{0781, 0785, 1317}
Using the 8T-2700 Blowby/Air Flow Indicator{0781, 0785, 1317}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Service Letter-China
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN 10R4134 SHORT BLOCKS, 10R4139 SHORT BLOCKS, 10R4144 LONG BLOCKS, and 10R4145 LONG BLOCKS FROM DEALER PART STOCK.
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN 10R4134 SHORT BLOCKS, 10R4139 SHORT BLOCKS, 10R4144 LONG BLOCKS, and 10R4145 LONG BLOCKS FROM DEALER PART STOCK.
Service Letter-Asia
Reuse And Salvage Guidelines
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}
Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Cylinder Block Salvage Procedure Using Belzona&reg; 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Service Letter-APD
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN 10R4134 SHORT BLOCKS, 10R4139 SHORT BLOCKS, 10R4144 LONG BLOCKS, and 10R4145 LONG BLOCKS FROM DEALER PART STOCK.
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN 10R4134 SHORT BLOCKS, 10R4139 SHORT BLOCKS, 10R4144 LONG BLOCKS, and 10R4145 LONG BLOCKS FROM DEALER PART STOCK.
Testing and Adjusting
Cylinder Block - Inspect
C7 Engines for Caterpillar Built Machines
Main Bearings - Inspect
C7 Engines for Caterpillar Built Machines
Excessive Bearing Wear - Inspect
C7 Engines for Caterpillar Built Machines
Disassembly and Assembly
Bearing Clearance - Check
C7
Engines for Caterpillar Built Machines
Piston Cooling Jets - Remove and Install
C7
Engines for Caterpillar Built Machines
Crankshaft Main Bearings - Remove
C7
Engines for Caterpillar Built Machines
Crankshaft Main Bearings - Install
C7
Engines for Caterpillar Built Machines
Camshaft Bearings - Remove and Install
C7
Engines for Caterpillar Built Machines
Operation and Maintenance Manual
Engine Valve Rotators - Inspect
IT62H Integrated Toolcarrier and 950H and 962H Wheel Loaders
Special Instruction
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Procedure for Troubleshooting and Cleaning the Oil Rail System for the Hydraulic Electronic Unit Injector (HEUI) {1100, 1126, 1250, 1251, 1261, 1290}
Procedure for Troubleshooting and Cleaning the Oil Rail System for the Hydraulic Electronic Unit Injector (HEUI) {1100, 1126, 1250, 1251, 1261, 1290}
Procedure to Improve Fuel Injectors on Certain Machine Engines {1100, 1126, 1250, 1251, 1290}
Procedure to Improve Fuel Injectors on Certain Machine Engines {1100, 1126, 1250, 1251, 1290}
Specifications
Cylinder Head
C7 Engines for Caterpillar Built Machines
Cylinder Head Valves
C7 Engines for Caterpillar Built Machines
Tool Operating Manual
Operating Instructions for 155-1536 Valve Recession Tool Kit for all G3500 and 3500 Engines{0374, 0599, 0701, 0703, 0759, 0767}
Operating Instructions for 155-1536 Valve Recession Tool Kit for all G3500 and 3500 Engines{0374, 0599, 0701, 0703, 0759, 0767}
Operating Instructions for 148-2997 Valve Recession Tool Group Used On 3600, G3600, and C175 Engines{0374, 0599, 0701, 0703, 0759}
Operating Instructions for 148-2997 Valve Recession Tool Group Used On 3600, G3600, and C175 Engines{0374, 0599, 0701, 0703, 0759}
188-3922 Broken Exhaust Bolt and Stud Removal Group for 3114, 3116, 3126, 3126B, 3176, 3176B, C-10, and C12 Engines{0374, 0599, 0701, 0702, 0703}
188-3922 Broken Exhaust Bolt and Stud Removal Group for 3114, 3116, 3126, 3126B, 3176, 3176B, C-10, and C12 Engines{0374, 0599, 0701, 0702, 0703}
CRB Valve Spring Testers 8S-2263 and 4C-9496{0374, 0599, 0700, 0701, 1108}
CRB Valve Spring Testers 8S-2263 and 4C-9496{0374, 0599, 0700, 0701, 1108}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
Reuse And Salvage Guidelines
Engine Valve Failure Modes{1100, 1105}
Engine Valve Failure Modes{1100, 1105}
Reuse and Salvage for Cylinder Head Assemblies {1100, 1101, 1103, 1104, 1105, 1106, 1108, 1109, 1115, 1117, 1121, 1124, 1125}
Reuse and Salvage for Cylinder Head Assemblies {1100, 1101, 1103, 1104, 1105, 1106, 1108, 1109, 1115, 1117, 1121, 1124, 1125}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Applied Failure Analysis
Engine Valve Failure Modes{1100, 1105}
Engine Valve Failure Modes{1100, 1105}
Information Release Memo
CAT REMAN ADDING CYLINDER HEAD KITS FOR 3126B, C7, C10/C12 APPLICATIONS
CAT REMAN ADDING CYLINDER HEAD KITS FOR 3126B, C7, C10/C12 APPLICATIONS
Testing and Adjusting
Engine Valve Lash - Inspect/Adjust
C7 Engines for Caterpillar Built Machines
Disassembly and Assembly
Inlet and Exhaust Valves - Remove and Install
C7
Engines for Caterpillar Built Machines
Inlet and Exhaust Valve Guides - Remove and Install
C7
Engines for Caterpillar Built Machines
Inlet and Exhaust Valve Seat Inserts - Remove and Install
C7
Engines for Caterpillar Built Machines
Unit Injector Sleeve - Remove
C7
Engines for Caterpillar Built Machines
Unit Injector Sleeve - Install
C7
Engines for Caterpillar Built Machines
Camshaft Bearings - Remove and Install
C7
Engines for Caterpillar Built Machines
Cylinder Head - Remove
C7
Engines for Caterpillar Built Machines
Cylinder Head - Install
C7
Engines for Caterpillar Built Machines
Service Magazine
Caterpillar Warranty Claims on Cylinder Head Valves {1105}
2005/10/03
A New O-ring for the Injector Sleeve is Now Used {1100}
2007/12/24
Diagnostic Publications for the Systems of the Hydraulic Electronic Unit Injector (HEUI) have been Updated {1100, 1126, 1250, 1251, 1261, 1290}
2009/08/10
A New Exhaust Valve Is Used for CertainC7 Machine Engines {1100}
A New Exhaust Valve Is Used for CertainC7 Machine Engines {1100}
Specifications
Vibration Damper
C7 Engines for Caterpillar Built Machines
Reuse And Salvage Guidelines
Reuse and Salvage for Cast Iron & Steel Pulleys and Stub Shafts {1205, 1207, 1384, 1425}
Reuse and Salvage for Cast Iron & Steel Pulleys and Stub Shafts {1205, 1207, 1384, 1425}
Reuse and Salvage for Engine Dampers {1202, 1205}
Reuse and Salvage for Engine Dampers {1202, 1205}
Testing and Adjusting
Vibration Damper - Check
C7 Engines for Caterpillar Built Machines
Disassembly and Assembly
Vibration Damper and Pulley - Remove and Install
C7
Engines for Caterpillar Built Machines
Operation and Maintenance Manual
Belt - Inspect/Adjust/Replace
IT62H Integrated Toolcarrier and 950H and 962H Wheel Loaders
Specifications
Fan Drive Mounting Group
C7 Engines for Caterpillar Built Machines
Disassembly and Assembly
Fan Drive Mounting Group - Remove and Install
C7
Engines for Caterpillar Built Machines
Operation and Maintenance Manual
Belt - Inspect/Adjust/Replace
IT62H Integrated Toolcarrier and 950H and 962H Wheel Loaders
Special Instruction
Oil and Your Engine {1000}
Oil and Your Engine {1000}
Service Magazine
Engine Storage and Engine Start-Up After Storage {1000, 1300, 1348, 7418}
Engine Storage and Engine Start-Up After Storage {1000, 1300, 1348, 7418}
Reuse And Salvage Guidelines
Inspection and Reuse of Critical Fasteners Used in All Engines {7553, 7553}
Inspection and Reuse of Critical Fasteners Used in All Engines {7553, 7553}
Specifications
Flywheel Housing
C7 Engines for Caterpillar Built Machines
Flywheel
C7 Engines for Caterpillar Built Machines
Reuse And Salvage Guidelines
Reuse and Salvage for Flywheel Assemblies {1156}
Reuse and Salvage for Flywheel Assemblies {1156}
Testing and Adjusting
Flywheel - Inspect
C7 Engines for Caterpillar Built Machines
Disassembly and Assembly
Flywheel - Remove
C7
Engines for Caterpillar Built Machines
Flywheel - Install
C7
Engines for Caterpillar Built Machines
Service Magazine
Updated Flywheel Housing is Now Used on Certain C7 Powered Engines {1156}
Updated Flywheel Housing is Now Used on Certain C7 Powered Engines {1156}
Engine News
An Improved Front Gear Train Timing Procedure Is Used for 3406E, 3456, C-15, C-16, C15, and C18 Engines {1206}
2012/12/14
Specifications
Gear Group (Front)
C7 Engines for Caterpillar Built Machines
Reuse And Salvage Guidelines
Reuse and Salvage for Gear Train and Gear Shafts on Engines {0679, 1151, 1162, 1206}
Reuse and Salvage for Gear Train and Gear Shafts on Engines {0679, 1151, 1162, 1206}
Testing and Adjusting
Gear Group (Front) - Time
C7 Engines for Caterpillar Built Machines
Disassembly and Assembly
Camshaft Idler Gear - Remove and Install
C7
Engines for Caterpillar Built Machines
Service Magazine
An Improved Front Gear Train Timing Procedure Is Used for 3406E, 3456, C-15, C-16, C15, and C18 Engines {1206}
2012/12/13
Specifications
Flywheel Housing
C7 Engines for Caterpillar Built Machines
Testing and Adjusting
Flywheel Housing - Inspect
C7 Engines for Caterpillar Built Machines
Disassembly and Assembly
Flywheel Housing - Remove and Install
C7
Engines for Caterpillar Built Machines
Specifications
Crankshaft Seals
C7 Engines for Caterpillar Built Machines
Front Housing and Covers
C7 Engines for Caterpillar Built Machines
Front Housing and Covers
C7 Engines for Caterpillar Built Machines
Reuse And Salvage Guidelines
Thermal Spray Procedures for Engine Front Cover{0679, 1150, 1151, 1162}
Thermal Spray Procedures for Engine Front Cover{0679, 1150, 1151, 1162}
Disassembly and Assembly
Front Cover - Remove and Install
C7
Engines for Caterpillar Built Machines
Housing (Front) - Remove
C7
Engines for Caterpillar Built Machines
Housing (Front) - Install
C7
Engines for Caterpillar Built Machines
Specifications
Engine and Transmission Mounting
950H Wheel Loader, 962H
Wheel Loader and IT62H
Integrated Toolcarrier Power Train
Operation and Maintenance Manual
Engine Oil Level - Check
IT62H Integrated Toolcarrier and 950H and 962H Wheel Loaders
Engine Oil and Filter - Change
IT62H Integrated Toolcarrier and 950H and 962H Wheel Loaders
Engine Oil Sample - Obtain
IT62H Integrated Toolcarrier and 950H and 962H Wheel Loaders
Technical Information Bulletin
3126 and C7 Oil Pan Gaskets{1302}
3126 and C7 Oil Pan Gaskets{1302}
Specifications
Engine Oil Pan
C7 Engines for Caterpillar Built Machines
Contamination Control Guidelines
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Disassembly and Assembly
Engine Oil Pan - Remove and Install
C7
Engines for Caterpillar Built Machines
Special Instruction
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Technical Information Bulletin
Specifications
Connecting Rod Bearing Journal
C7 Engines for Caterpillar Built Machines
Piston and Rings
C7 Engines for Caterpillar Built Machines
Piston and Rings
C7 Engines for Caterpillar Built Machines
Piston Cooling Jet
C7 Engines for Caterpillar Built Machines
Piston Cooling Jet
C7 Engines for Caterpillar Built Machines
Piston and Rings
C7 Engines for Caterpillar Built Machines
Connecting Rod
C7 Engines for Caterpillar Built Machines
Tool Operating Manual
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
Reuse And Salvage Guidelines
Reuse and Salvage for Connecting Rods {1218}
Reuse and Salvage for Connecting Rods {1218}
Inspection Procedures and Specifications for Pistons and Piston Pins {1214, 1214}
Inspection Procedures and Specifications for Pistons and Piston Pins {1214, 1214}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Testing and Adjusting
Engine Crankcase Pressure (Blowby) - Test
C7 Engines for Caterpillar Built Machines
Connecting Rod Bearings - Inspect
C7 Engines for Caterpillar Built Machines
Piston Ring Groove - Inspect
C7 Engines for Caterpillar Built Machines
Excessive Bearing Wear - Inspect
C7 Engines for Caterpillar Built Machines
Compression - Test
C7 Engines for Caterpillar Built Machines
Disassembly and Assembly
Bearing Clearance - Check
C7
Engines for Caterpillar Built Machines
Piston Cooling Jets - Remove and Install
C7
Engines for Caterpillar Built Machines
Pistons and Connecting Rods - Remove
C7
Engines for Caterpillar Built Machines
Pistons and Connecting Rods - Install
C7
Engines for Caterpillar Built Machines
Connecting Rod Bearings - Remove
C7
Engines for Caterpillar Built Machines
Pistons and Connecting Rods - Disassemble
C7
Engines for Caterpillar Built Machines
Pistons and Connecting Rods - Assemble
C7
Engines for Caterpillar Built Machines
Connecting Rod Bearings - Install
C7
Engines for Caterpillar Built Machines
Service Magazine
New Fractured Connecting Rod is Now Available for Certain Engines {1218}
New Fractured Connecting Rod is Now Available for Certain Engines {1218}
Operation and Maintenance Manual
Belt - Inspect/Adjust/Replace
IT62H Integrated Toolcarrier and 950H and 962H Wheel Loaders
Specifications
Crankshaft Pulley
C7 Engines for Caterpillar Built Machines
Reuse And Salvage Guidelines
Reuse and Salvage for Cast Iron & Steel Pulleys and Stub Shafts {1205, 1207, 1384, 1425}
Reuse and Salvage for Cast Iron & Steel Pulleys and Stub Shafts {1205, 1207, 1384, 1425}
Disassembly and Assembly
Vibration Damper and Pulley - Remove and Install
C7
Engines for Caterpillar Built Machines
Reuse And Salvage Guidelines
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Removing and Installing Bushings and Pressure Plates in Hydraulic Gear Pumps {5073}
Removing and Installing Bushings and Pressure Plates in Hydraulic Gear Pumps {5073}
Bench Test Procedures
Bench Test Procedure for Gear Pumps {5073}
Bench Test Procedure for Gear Pumps {5073}
Special Instruction
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Technical Information Bulletin
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
Tool Operating Manual
Using the 198-4240 Digital Pressure Indicator Group{0599, 0738, 0788, 1000, 3000, 4000, 5000, 6000}
Using the 198-4240 Digital Pressure Indicator Group{0599, 0738, 0788, 1000, 3000, 4000, 5000, 6000}
Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}
Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
Using the 1U-8860 Large Engine Blowby Pickup Group and the 8T-2700 Blowby/Airflow Indicator{0781, 0785, 1000}
Using the 1U-8860 Large Engine Blowby Pickup Group and the 8T-2700 Blowby/Airflow Indicator{0781, 0785, 1000}
NEHS0566 <NOBR> 4C-9832</NOBR> Large Engine Roll-Over Stand {0599, 0701}
NEHS0566 4C-9832 Large Engine Roll-Over Stand {0599, 0701}
9U-7370 Belt Tension Tester {0599, 0701}
9U-7370 Belt Tension Tester {0599, 0701}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
146-1738 Precision Borescope (Hawkeye){0599, 0614, 0644, 0701, 0706, 0708, 0727, 0738}
146-1738 Precision Borescope (Hawkeye){0599, 0614, 0644, 0701, 0706, 0708, 0727, 0738}
Operating Instructions for 155-1536 Valve Recession Tool Kit for all G3500 and 3500 Engines{0374, 0599, 0701, 0703, 0759, 0767}
Operating Instructions for 155-1536 Valve Recession Tool Kit for all G3500 and 3500 Engines{0374, 0599, 0701, 0703, 0759, 0767}
Operating Instructions for 148-2997 Valve Recession Tool Group Used On 3600, G3600, and C175 Engines{0374, 0599, 0701, 0703, 0759}
Operating Instructions for 148-2997 Valve Recession Tool Group Used On 3600, G3600, and C175 Engines{0374, 0599, 0701, 0703, 0759}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}
NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}
188-3922 Broken Exhaust Bolt and Stud Removal Group for 3114, 3116, 3126, 3126B, 3176, 3176B, C-10, and C12 Engines{0374, 0599, 0701, 0702, 0703}
188-3922 Broken Exhaust Bolt and Stud Removal Group for 3114, 3116, 3126, 3126B, 3176, 3176B, C-10, and C12 Engines{0374, 0599, 0701, 0702, 0703}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
CRB Valve Spring Testers 8S-2263 and 4C-9496{0374, 0599, 0700, 0701, 1108}
CRB Valve Spring Testers 8S-2263 and 4C-9496{0374, 0599, 0700, 0701, 1108}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
Reuse And Salvage Guidelines
Reuse and Salvage for Crankshafts {0674, 1202}
Reuse and Salvage for Crankshafts {0674, 1202}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
Cylinder Block Salvage Procedure Using Belzona&reg; 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Service Magazine
Use the 171-7212 Wear Sleeve to Repair the Crankshaft Hub {1160}
2011/09/20
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}
Truck Engine News
Set Engine Valve Lash After Installing All Remanufactured Long Blocks {1102, 1121, 1123, 1209}
2012/10/08
Engine News
Set Engine Valve Lash After Installing All Remanufactured Long Blocks {1102, 1121, 1123, 1209}
2012/10/08
Operation and Maintenance Manual
Engine Valve Lash - Check
IT62H Integrated Toolcarrier and 950H and 962H Wheel Loaders
Special Instruction
Improving Oil Leakage From the Crankcase Breather{1107, 1120, 1317}
Improving Oil Leakage From the Crankcase Breather{1107, 1120, 1317}
Specifications
Lifter Group
C7 Engines for Caterpillar Built Machines
Valve Mechanism Cover
C7 Engines for Caterpillar Built Machines
Valve Mechanism Cover
C7 Engines for Caterpillar Built Machines
Valve Mechanism Cover
C7 Engines for Caterpillar Built Machines
Valve Mechanism
C7 Engines for Caterpillar Built Machines
Tool Operating Manual
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
Operating Instructions for 155-1536 Valve Recession Tool Kit for all G3500 and 3500 Engines{0374, 0599, 0701, 0703, 0759, 0767}
Operating Instructions for 155-1536 Valve Recession Tool Kit for all G3500 and 3500 Engines{0374, 0599, 0701, 0703, 0759, 0767}
Operating Instructions for 148-2997 Valve Recession Tool Group Used On 3600, G3600, and C175 Engines{0374, 0599, 0701, 0703, 0759}
Operating Instructions for 148-2997 Valve Recession Tool Group Used On 3600, G3600, and C175 Engines{0374, 0599, 0701, 0703, 0759}
CRB Valve Spring Testers 8S-2263 and 4C-9496{0374, 0599, 0700, 0701, 1108}
CRB Valve Spring Testers 8S-2263 and 4C-9496{0374, 0599, 0700, 0701, 1108}
Reuse And Salvage Guidelines
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
Information Release Memo
CAT REMAN ADDING CYLINDER HEAD KITS FOR 3126B, C7, C10/C12 APPLICATIONS
CAT REMAN ADDING CYLINDER HEAD KITS FOR 3126B, C7, C10/C12 APPLICATIONS
Testing and Adjusting
Engine Valve Lash - Inspect/Adjust
C7 Engines for Caterpillar Built Machines
Finding Top Center Position for No. 1 Piston
C7 Engines for Caterpillar Built Machines
Troubleshooting
Excessive Valve Lash
C7 Engines for IT62H Integrated Toolcarrier and for 950H and 962H Wheel Loaders
Disassembly and Assembly
Rocker Shaft - Disassemble
C7
Engines for Caterpillar Built Machines
Rocker Shaft - Assemble
C7
Engines for Caterpillar Built Machines
Valve Mechanism Cover - Remove and Install
C7
Engines for Caterpillar Built Machines
Valve Mechanism Cover Base - Remove and Install
C7
Engines for Caterpillar Built Machines
Rocker Shaft and Pushrod - Remove
C7
Engines for Caterpillar Built Machines
Rocker Shaft and Pushrod - Install
C7
Engines for Caterpillar Built Machines
Lifter Group - Remove and Install
C7
Engines for Caterpillar Built Machines
Service Magazine
A New Valve Cover Seal is Now Used {1107, 1120}
2006/07/17
Improved Crankcase Breather Assemblies Are Used on Certain Machines Equipped with C7 Engines {1107, 1317}
2011/04/06
Improved Crankcase Breather Assemblies Are Used on Certain Machines Equipped with C7 Engines {1107, 1317}
2011/04/11
An Improved Method Is Now Employed for the Manufacturing of Exhaust Valve Rocker Arms Used in the Engines of Certain C7 Machines {1102, 1123}
2012/09/06
Set Engine Valve Lash After Installing All Remanufactured Long Blocks {1102, 1121, 1123, 1209}
2012/10/08
Reuse And Salvage Guidelines
Thermal Spray Procedures for Engine Front Cover{0679, 1150, 1151, 1162}
Thermal Spray Procedures for Engine Front Cover{0679, 1150, 1151, 1162}
Service Magazine
A New Improved Seal Is Now Used in the Reman Water Pumps in the Engines of Certain Machines {1000, 1361, 7555}
2012/05/10

Truck sale:

Caterpillar 950H
 
Caterpillar 950H
- Wheel Loaders
BERGERAT MONNOYEUR S.A.S.
Caterpillar 950H, Wheel Loaders, Construction
70,000 
Caterpillar 950H, Wheel Loaders, Construction
- Wheel Loaders
GREGORY POOLE EQUIPMENT CO.
 
50,000 
Caterpillar 950H, Wheel Loaders, Construction
- Wheel Loaders
FINNING CHILE S.A.
Caterpillar 950H, Wheel Loaders, Construction
99,500 
Caterpillar 950H, Wheel Loaders, Construction
- Wheel Loaders
HOLT CAT
 
60,000 
Caterpillar 950H, Wheel Loaders, Construction
- Wheel Loaders
FINNING CHILE S.A.
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.