8Q-4753 CONVERSION AR-ENGINE IT14G INTEGRATED TOOLCARRIER

ENGINE ARRANGEMENT

ENGINE AR

1. 8Q-4753 CONVERSION

OPERATOR STATION

PEDAL GP

3. 310-1564 PEDAL GP-G

FUEL SYSTEM

FILTER GP-FUEL

2. 318-8064 FILTER GP-
0. INFORMATION

INTEGRATED TOOLCARRIER IT14G INTEGRATED TOOLCARRIER FWL
Custom Parts Information Small Wheel Loaders FWL00001-UP (MACHINE) SEBC1533 IT14G FWL (2004)

ENGINE ARRANGEMENT

ENGINE AR

8Q-4753 CONVERSION AR-ENGINE

#SEBC15330001

8Q-4753: CONVERSION AR-ENGINE

CONVERSION AR-ENGINE

8Q-4753 CONVERSION AR-ENGINE

i03903449 SEBC1533

For full view, you need register

Parts for your IT14G INTEGRATED TOOLCARRIER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	1Q-2759	[2]	PLATE-IDENTIFICATION
2.	5D-1026	[2]	CLAMP-BAND
3.	7K-1181	[39]	STRAP-CABLE
4.	8T-8799	[1]	BOOT
5.	109-2356	[1]	PLUG
6.	111-7899	[1]	GASKET
7.	129-3178 M	[1]	LOCKNUT (M6X1-THD)
8.	131-3201	[1]	BOOT
9.	150-5030	[1]	INDICATOR-AIR FILTER CHANGE
10.	151-4841	[2]	BLOCK
11.	160-0614	[1]	TUBE AS
12.	200-1898	[1]	SUPPRESSOR-ARC
13.	200-6345	[2]	MOUNT (DUAL SWIVEL)
14.	241-6864	[3]	RESISTOR AS
			(EACH INCLUDES)
	102-8804	[1]	KIT-RECEPTACLE (4-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
15.	264-3518	[2]	CONNECTOR-RECEPTACLE
16.	274-3777	[1]	CAP-CONNECTOR
17.	284-9039	[1]	CAP-FUEL
18.	288-3687	[1]	CIRCUIT BREAKER AS (20-AMPERE)
	6V-8378	[2]	NUT (10-32-THD)
	8F-1434	[2]	LOCKWASHER
	8T-0328	[2]	WASHER-HARD (5.5X10X1-MM THK)
19.	300-1271	[1]	BRACKET
20.	310-1564 Y	[1]	PEDAL GP-GOVERNOR
21.	318-8064 Y	[1]	FILTER GP-WATER SEP & FUEL
22.	356-4587	[1]	TUBE AS
23.	356-4588	[1]	TUBE AS
24.	356-4623	[1]	BRACKET AS
25.	356-4624	[1]	BRACKET AS
26.	356-4625	[1]	PLATE
27.	356-4626	[1]	PLATE
28.	356-5004	[1]	TUBE
29.	357-1470	[1]	PLATE
30.	357-1472	[1]	FILM-CONTROL
31.	357-1473	[1]	HARNESS AS-ENGINE
	102-8802	[2]	KIT-RECEPTACLE (2-PIN)
	102-8802	[2]	KIT-RECEPTACLE (2-PIN)
	102-8801	[1]	KIT-RECEPTACLE (12-PIN)
			(EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
	155-2270	[2]	KIT-CONNECTING PLUG (2-PIN)
	155-2271	[4]	KIT-CONNECTING PLUG (4-PIN)
	155-2274	[1]	KIT-CONNECTING PLUG (6-PIN)
	155-2270	[3]	KIT-CONNECTING PLUG (2-PIN)
	155-2271	[4]	KIT-CONNECTING PLUG (4-PIN)
	155-2274	[1]	KIT-CONNECTING PLUG (6-PIN)
	155-2260	[1]	KIT-CONNECTING PLUG (3-PIN)
			(EACH PLUG KIT INCLUDES PLUG AS & WEDGE)
	245-1042	[1]	PLUG AS-CONNECTOR (64-PIN)
	267-7207 M	[1]	BOLT-SPECIAL
	245-1044	[1]	LOCK-CONNECTOR
	245-1045	[1]	COVER
32.	357-6831	[1]	HARNESS AS-SENSOR (GOVERNOR PEDAL)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
33.	357-6832	[1]	HARNESS AS-WIRING (JUMPER)
	9X-3402	[1]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	126-1768	[1]	SOCKET-CONNECTOR (14-GA)
34.	099-3649 M	[2]	BOLT (M8X1.25X40-MM)
35.	134-8273 M	[2]	SCREW-FLAT HEAD (M10X1.5X25-MM)
36.	136-8543	[1]	CONNECTOR
37.	4B-4863	[2]	WASHER (4.7X11X1.2-MM THK)
38.	4P-7581	[3]	CLIP
39.	4P-8134	[2]	CLIP
40.	4S-1962	[1]	CLIP
41.	6K-8178	[1]	CLIP
42.	6V-7345	[2]	SCREW-MACHINE (8-32X0.875-IN)
43.	6V-8397	[1]	SEAL-O-RING
44.	7I-2673	[1]	STRAP-CABLE
45.	8T-4121	[2]	WASHER-HARD (11X21X2.5-MM THK)
46.	8T-4137 M	[1]	BOLT (M10X1.5X20-MM)
47.	8T-4189 M	[1]	BOLT (M8X1.25X20-MM)
48.	8T-4195 M	[2]	BOLT (M10X1.5X30-MM)
49.	8T-4196 M	[2]	BOLT (M10X1.5X35-MM)
50.	8T-4224	[3]	WASHER-HARD (8.8X16X2-MM THK)
51.	8T-4908 M	[1]	BOLT (M8X1.25X25-MM)
52.	8T-6850	[1]	SEAL-O-RING
53.	8T-7547 M	[1]	BOLT (M8X1.25X30-MM)

	5P-0743 EF		HOSE (67-CM)
	5P-1420 EF		HOSE (214-CM)
	E		ORDER BY THE CENTIMETER
	F		NOT SHOWN
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBC15330003

310-1564: PEDAL GP-GOVERNOR

PEDAL GP-GOVERNOR

310-1564 PEDAL GP-GOVERNOR -ELECTRONIC
PART OF 8Q-4753 CONVERSION AR-ENGINE

i03054437 SEBC1533

For full view, you need register

Parts for your IT14G INTEGRATED TOOLCARRIER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3C-4922 M	[1]	BOLT (M8X1.25X60-MM)
2.	179-4324 M	[2]	LOCKNUT (M5X0.8-THD)
3.	243-0063	[1]	BOOT
4.	266-1467	[1]	SENSOR GP-POSITION (ROTARY)
	9X-3401	[3]	PIN-CONNECTOR (16-GA TO 18-GA)
			-OR-
	126-1767	[3]	PIN-CONNECTOR (14-GA)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
5.	096-3772 M	[2]	SCREW-MACHINE (M4X0.7X16-MM)
6.	131-3540 M	[2]	LOCKNUT (M8X1.25-THD)
7.	3C-3364 M	[1]	NUT-HALF (M8X1.25-THD)
8.	6V-2313 M	[2]	BOLT (M5X0.8X30-MM)
9.	8T-0328	[2]	WASHER-HARD (5.5X10X1-MM THK)
10.	8T-6902	[2]	CLIP
11.	8T-6912 M	[2]	BOLT (M8X1.25X50-MM)
12.	243-0062	[1]	KIT-REPAIR (GOVERNOR PEDAL)
			(INCLUDES SHAFT, CLIPS & BEARINGS)
	M		METRIC PART

#SEBC15330002

318-8064: FILTER GP-WATER SEP & FUEL

FILTER GP-WATER SEP & FUEL

318-8064 FILTER GP-WATER SEP & FUEL
PART OF 8Q-4753 CONVERSION AR-ENGINE

i03849764 SEBC1533

3188064 FILTER GP-WATER SEP & FUEL Parts scheme

For full view, you need register

Parts for your IT14G INTEGRATED TOOLCARRIER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	308-7576	[1]	FILTER GP-WATER SEP & FUEL
1A.	308-7298	[1]	FILTER AS-WATER SEP & FUEL
	220-8678	[1]	SEAL-RING
1B.	310-5912	[1]	BOWL AS
2.	313-1663	[1]	SENSOR-PRESSURE (WATER SEPARATOR)
3.	333-9694	[1]	BOOT-SEAL
4.	333-9693	[1]	KIT-CONNECTION (FUEL, WATER SEPARATOR)
			(INCLUDES CONNECTORS, PLUG & O-RINGS)

Information:

ENGINE ARRANGEMENT

ENGINE AR

Truck Engine News

Service Magazines, Engine News, and Truck Engine News Articles Moved from Dealer.cat.com to SISweb {0374, 1000, 7000}
2015/09/23

A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}

Changes to the Way Serial Numbers are Displayed in Truck Engine News {0374, 1000, 7000}
Changes to the Way Serial Numbers are Displayed in Truck Engine News {0374, 1000, 7000}

Engine News

Improved Registration Process for Retrofit Products {1000, 7000}
2011/04/15

Service Magazines, Engine News, and Truck Engine News Articles Moved from Dealer.cat.com to SISweb {0374, 1000, 7000}
2015/09/18

A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}

Changes to the Way Serial Numbers are Displayed in Engine News {0374, 1000, 7000}
Changes to the Way Serial Numbers are Displayed in Engine News {0374, 1000, 7000}

Procedure for Cleaning an Engine Lubrication System when Contaminated with Engine Coolant Containing Antifreeze {1000, 1348, 1395}
Procedure for Cleaning an Engine Lubrication System when Contaminated with Engine Coolant Containing Antifreeze {1000, 1348, 1395}

Operation and Maintenance Manual

Declaration of Conformity
914G Compact Wheel Loader and IT14G Integrated Toolcarrier

Special Instruction

Caterpillar DPF Installation and Operation Guide for Diesel Engines - California Only {1000, 1091}
Caterpillar DPF Installation and Operation Guide for Diesel Engines - California Only {1000, 1091}

Generation 3 DPFdm Diagnostic Module Installation Manual - California Only {1000, 1091, 7490}
Generation 3 DPFdm Diagnostic Module Installation Manual - California Only {1000, 1091, 7490}

Storage Procedure for Caterpillar Products {0355, 1000, 7000}
Storage Procedure for Caterpillar Products {0355, 1000, 7000}

Instructions to Register the Retrofit and Submit Service Reporting {1000, 3000, 7000, 7570}
Instructions to Register the Retrofit and Submit Service Reporting {1000, 3000, 7000, 7570}

Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}

Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}

Differences in Appearance of Cat ® Reman Parts when Compared to New Parts {1000, 1250}
Differences in Appearance of Cat ^® Reman Parts when Compared to New Parts {1000, 1250}

Introduction to Visualization Service Procedure (VSP) {0374, 1000, 7000}
Introduction to Visualization Service Procedure (VSP) {0374, 1000, 7000}

Service Letter-NACD

PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK PL121 SATELLITE RADIO SOFTWARE ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK PL121 SATELLITE RADIO SOFTWARE ON CERTAIN CATERPILLAR PRODUCTS

PRODUCT SUPPORT PROGRAM FOR REPLACING PRODUCT LINK PL121 SATELLITE RADIOS ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR REPLACING PRODUCT LINK PL121 SATELLITE RADIOS ON CERTAIN CATERPILLAR PRODUCTS

Service Letter-Australia

Service Letter-CFEL

Service Letter-CSARL

Service Letter-Americas

Technical Information Bulletin

A Recommendation for Initial Parts Stock Quantities Will Now Be Included in Service Letters{1000, 7000, 7751, 7752}
A Recommendation for Initial Parts Stock Quantities Will Now Be Included in Service Letters{1000, 7000, 7751, 7752}

Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}

368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}

Specifications

Engine Design
3054C Engines for Caterpillar Built Machines

Tool Operating Manual

Using the 1U-8860 Large Engine Blowby Pickup Group and the 8T-2700 Blowby/Airflow Indicator{0781, 0785, 1000}
Using the 1U-8860 Large Engine Blowby Pickup Group and the 8T-2700 Blowby/Airflow Indicator{0781, 0785, 1000}

NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}
NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}

142-6893 Adjustable Lifting Bracket Group{0599, 0629, 0632, 0701, 0717, 1000, 4000, 7000}
142-6893 Adjustable Lifting Bracket Group{0599, 0629, 0632, 0701, 0717, 1000, 4000, 7000}

Service Letter-China

Service Letter-Asia

Systems Operation

General Information
3054C Engines for Caterpillar Built Machines

Reuse And Salvage Guidelines

Reuse and Testing of Fuel Injection Pump Housing {0374, 1000, 1250, 1300}
Reuse and Testing of Fuel Injection Pump Housing {0374, 1000, 1250, 1300}

Cleaning Components with Carbon Dioxide (CO2) {0680, 1000, 7000}
Cleaning Components with Carbon Dioxide (CO₂) {0680, 1000, 7000}

Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}

Reuse and Salvage Guidelines Subscriptions {0374, 0599, 1000, 7000}
Reuse and Salvage Guidelines Subscriptions {0374, 0599, 1000, 7000}

Scrap Barrel Analysis {0374, 0599, 0700, 0701, 0738, 1000, 7000}
Scrap Barrel Analysis {0374, 0599, 0700, 0701, 0738, 1000, 7000}

Fundamentals of Plasma Transferred Wire Arc (PTWA) Spray for Reconditioning Components {0374, 0599, 0679, 1000}
Fundamentals of Plasma Transferred Wire Arc (PTWA) Spray for Reconditioning Components {0374, 0599, 0679, 1000}

Contamination Control Guidelines

Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}

Applied Failure Analysis

Failure Analysis Report - AFA Good Report {0374, 1000}
Failure Analysis Report - AFA Good Report {0374, 1000}

Reference Guide for a Proper Failure Analysis by CAT Dealer {0374, 1000}
Reference Guide for a Proper Failure Analysis by CAT Dealer {0374, 1000}

Product Evaluation Report - AFA Bad Report {0374, 1000}
Product Evaluation Report - AFA Bad Report {0374, 1000}

Information Release Memo

PRODUCT LINE ADDITIONS: REMANUFACTURED CAT 3054C / 3054E INDUSTRIAL ENGINES AND ENGINES FOR PAVING AND GENERAL CONSTRUCTION MACHINE APPLICATIONS
PRODUCT LINE ADDITIONS: REMANUFACTURED CAT 3054C / 3054E INDUSTRIAL ENGINES AND ENGINES FOR PAVING AND GENERAL CONSTRUCTION MACHINE APPLICATIONS

Service Letter-APD

Testing and Adjusting

Troubleshooting
3054C Engines for Caterpillar Built Machines

Disassembly and Assembly

Steering Frame Lock - Separate and Connect
914G and 914G2
Compact Wheel Loaders and
IT14G and IT14G2
Integrated Toolcarriers Engine Supplement

Engine - Remove
914G and 914G2
Compact Wheel Loaders and
IT14G and IT14G2
Integrated Toolcarriers Engine Supplement

System Pressure - Release
914G and 914G2
Compact Wheel Loaders and
IT14G and IT14G2
Integrated Toolcarriers Engine Supplement

Engine - Install
914G and 914G2
Compact Wheel Loaders and
IT14G and IT14G2
Integrated Toolcarriers Engine Supplement

Service Magazine

Caterpillar's Position On The Use Of Biodiesel Fuel In Caterpillar Engines {1000}
2012/09/17

Proper Long Term Storage of Caterpillar Products {0355, 1000, 7000}
2009/04/27

Changes To Caterpillar Incident Reporting Field Use Form And DSN Incident Report Entry Screens {1000, 7000}
2009/11/18

Redesigned Fluid Sampling Valves Are Now Available for All Cat Products {7542}
2011/02/11

Improved Registration Process for Retrofit Products {1000, 3000, 7000, 7570}
2011/02/17

TA2 (Technical Analysis) Inspections are Now Available on SIS {0372, 1000, 7000, 753T, 7565}
2013/01/10

Cat® Reman Announces the Availability of Additional Engine Components for Certain Machine Applications {1000, 1052, 1053, 1210, 1251, 1252, 1254, 1265, 1290, 1405, 1713, 1901, 7490, 7610, 7620}
2015/06/25

Service Magazines, Engine News, and Truck Engine News Articles Moved from Dealer.cat.com to SISweb {0374, 1000, 7000}
2015/09/22

A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}

Military Electronic Technician (Military ET) Is Now Available For Military Personnel {0374, 0376, 0599, 1000, 7000, 7610, 7620}
Military Electronic Technician (Military ET) Is Now Available For Military Personnel {0374, 0376, 0599, 1000, 7000, 7610, 7620}

Process to Print Collage Schematics {0374, 1000, 7000}
Process to Print Collage Schematics {0374, 1000, 7000}

Changes to the Way Serial Numbers are Displayed on Service Magazines {0374, 1000, 7000}
Changes to the Way Serial Numbers are Displayed on Service Magazines {0374, 1000, 7000}

A New Process Is Available to Request Service Animations for Certain Service Information Procedures {1000, 7000}
A New Process Is Available to Request Service Animations for Certain Service Information Procedures {1000, 7000}

Caterpillar Parts SIS Catalog IT14G :

318-8064 FILTER GP-WATER SEP & FUEL

310-1564 PEDAL GP-GOVERNOR

Truck sale:

Caterpillar IT14G2
- Wheel loaders
PETERSON TRACTOR CO

51.936

Caterpillar IT14G2, Kompaktlader, Bau-Und Bergbauausrüstung
- Skid steer loaders
TOROMONT CAT

69.846

Caterpillar IT 14 G 2, Radlader, Bau-Und Bergbauausrüstung
- Wheel loaders
MILTON CAT

32.220

Caterpillar IT14G2, Kompaktlader, Bau-Und Bergbauausrüstung
- Skid Steer Loaders

45,000

Caterpillar IT14G2, Construction
- Wheel Loaders
PETERSON TRACTOR CO