AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

330–4870 STEEL MILL ARRANGEMENT CUSTOM PRODUCT SUPPORT LITERATURE FOR THE 980K WHEEL LOADER W7K00001-UP (MACHINE) FUEL SYSTEM Caterpillar SIS



WHEEL LOADER 980K WHEEL LOADER W7K
 330–4870 STEEL MILL ARRANGEMENT CUSTOM PRODUCT SUPPORT LITERATURE FOR THE 980K WHEEL LOADER W7K00001-UP (MACHINE) SEBC1543 980K W7K   (2011)

Parts group 980K:

  For full view, you need register
FUEL SYSTEM
TANK GP-FUEL
TANK & MTG GP-FUEL
371-0856 TANK & MTG GP-FUEL
371-0856 TANK & MTG GP-FUEL -STEEL MILL
CUSTOM
PART OF 379-6438 GUARD AR-STEEL MILL
TANK GP-FUEL
377-3521 TANK GP-FUEL
377-3521 TANK GP-FUEL -INCLUDES LADDER
CUSTOM
PART OF 371-0856 TANK & MTG GP-FUEL
TANK GP-FUEL
377-3522 TANK GP-FUEL
377-3522 TANK GP-FUEL -STEEL MILL
CUSTOM
PART OF 377-3521 TANK GP-FUEL

Information:

(For parts list, see above)

Troubleshooting
ARD Fuel Supply - Test
C13, C15, and C18 Tier 4 Interim Engines
ARD Fuel Pressure Is High
C13, C15, and C18 Tier 4 Interim Engines
ARD Fuel Pressure Is Low
C13, C15, and C18 Tier 4 Interim Engines
Disassembly and Assembly
Fuel Manifold (ARD) - Remove and Install - Clean Emissions Module
C13
Engines for Caterpillar Built Machines
Fuel Manifold (ARD) - Remove and Install - Clean Emissions Module
980K Wheel Loader C13 Engine Supplement
Service Magazine
Cat® Reman Announces New Fuel Pump, Fuel Ratio Control, and Fuel Injector Options for Certain Machine Engines {1251, 1278}
2014/09/04
Engine News
A New Specification Has Been Issued for the Primary Fuel Filter Filtration {1250, 1261}
2012/08/21
A New Specification Has Been Issued for the Primary Fuel Filter Filtration {1260}
A New Specification Has Been Issued for the Primary Fuel Filter Filtration {1260}
Operation and Maintenance Manual
Fuel System Secondary Filter - Replace
980K Wheel Loader
Fuel System Primary Filter (Water Separator) - Drain
980K Wheel Loader
Fuel System Primary Filter (Water Separator) Element - Replace
980K Wheel Loader
Special Instruction
Installing Optional Migration Kits on C9.3 through C15 ACERT Tier 4 Interim Machine Engines {1000, 1261, 1380, 775E}
Installing Optional Migration Kits on C9.3 through C15 ACERT Tier 4 Interim Machine Engines {1000, 1261, 1380, 775E}
Technical Information Bulletin
Fuel Filter Restriction Pop-up in Display May Lead to Premature Replacement of the Fuel Filters on 966K, 972K and 980K{1261, 1901, 7490, 7620}
Fuel Filter Restriction Pop-up in Display May Lead to Premature Replacement of the Fuel Filters on 966K, 972K and 980K{1261, 1901, 7490, 7620}
Specifications
Fuel Filter Base
C13 Engines for Caterpillar Built Machines
Fuel Priming Pump and Primary Fuel Filter - With Water Separator
C13 Engines for Caterpillar Built Machines
Tool Operating Manual
295-0048 Bulk Fuel Filtration Group 300 GPM Flow Rate{0374, 0599, 0680, 0706, 1250, 1261, 1280}
295-0048 Bulk Fuel Filtration Group 300 GPM Flow Rate{0374, 0599, 0680, 0706, 1250, 1261, 1280}
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
Troubleshooting
Fuel Filter Is Restricted
C13, C15, and C18 Tier 4 Interim Engines
Disassembly and Assembly
Fuel Filter Base - Remove and Install
C13
Engines for Caterpillar Built Machines
Fuel Priming Pump and Primary Filter (Water Separator) - Remove and Install
980K Wheel Loader C13 Engine Supplement
Fuel Filter (Secondary) and Fuel Filter Base - Remove and Install
980K Wheel Loader C13 Engine Supplement
Service Magazine
New Liquid Level Sensor Gp Is Now Used as Service Replacement on Certain Cat Products {1263, 7422}
2013/04/02
New All Metal Fuel and Water Separators Are Used For Certain Machines {1261, 1263}
2013/08/19
Special Instruction
Fuel Filtration Kits Used for Migrated 980K Wheel Loaders{1250}
Fuel Filtration Kits Used for Migrated 980K Wheel Loaders{1250}
Tool Operating Manual
NEHS1126: <NOBR>370-8570</NOBR> Bulk Fuel Filtration Group 200 GPM Flow Rate {0599, 0680, 0706, 0782, 1250, 1280}
NEHS1126: 370-8570 Bulk Fuel Filtration Group 200 GPM Flow Rate {0599, 0680, 0706, 0782, 1250, 1280}
370-8568 Bulk Fuel Filtration Group 50 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
370-8568 Bulk Fuel Filtration Group 50 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
284-0413 Bulk Fuel Filtration Group 50 GPM Flow Rate{0680, 0782, 1250, 1280}
284-0413 Bulk Fuel Filtration Group 50 GPM Flow Rate{0680, 0782, 1250, 1280}
284-0415 Bulk Fuel Filtration Group 100 GPM Flow Rate{0680, 0782, 1250, 1280}
284-0415 Bulk Fuel Filtration Group 100 GPM Flow Rate{0680, 0782, 1250, 1280}
284-0416 Bulk Fuel Filtration Group 200 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
284-0416 Bulk Fuel Filtration Group 200 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
295-0048 Bulk Fuel Filtration Group 300 GPM Flow Rate{0374, 0599, 0680, 0706, 1250, 1261, 1280}
295-0048 Bulk Fuel Filtration Group 300 GPM Flow Rate{0374, 0599, 0680, 0706, 1250, 1261, 1280}
370-8569 Bulk Fuel Filtration Group 100 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
370-8569 Bulk Fuel Filtration Group 100 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
370-8571 Bulk Fuel Filtration Group 300 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
370-8571 Bulk Fuel Filtration Group 300 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Testing and Adjusting Fuel Injection Pump and Governor on 3064 and 3066 Engines{0374, 0599, 0706}
Testing and Adjusting Fuel Injection Pump and Governor on 3064 and 3066 Engines{0374, 0599, 0706}
169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}
169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}
398-9680 Calibration Test Group{0599, 0706, 1250, 1251, 1252, 1280}
398-9680 Calibration Test Group{0599, 0706, 1250, 1251, 1252, 1280}
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
Special Instruction
Fuel Filtration Kits Used for Migrated 980K Wheel Loaders{1250}
Fuel Filtration Kits Used for Migrated 980K Wheel Loaders{1250}
Installing Optional Migration Kits on C9.3 through C15 ACERT Tier 4 Interim Machine Engines {1000, 1261, 1380, 775E}
Installing Optional Migration Kits on C9.3 through C15 ACERT Tier 4 Interim Machine Engines {1000, 1261, 1380, 775E}
Specifications
Fuel Pressure Regulator
C13 Engines for Caterpillar Built Machines
Tool Operating Manual
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Disassembly and Assembly
Fuel Manifold (ARD) - Remove and Install - Clean Emissions Module
C13
Engines for Caterpillar Built Machines
Fuel Manifold (ARD) - Remove and Install - Clean Emissions Module
980K Wheel Loader C13 Engine Supplement
Fuel Tank - Remove and Install
980K Wheel Loader Machine Systems
Fuel Filter (Secondary) and Fuel Filter Base - Remove and Install
980K Wheel Loader C13 Engine Supplement
Service Magazine
New Fuel Pressure Sensors Are Available to Replace the ARD Pilot and Main Pressure Sensors on Certain Machines {1274, 1718}
2013/03/20
Tool Operating Manual
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
398-9680 Calibration Test Group{0599, 0706, 1250, 1251, 1252, 1280}
398-9680 Calibration Test Group{0599, 0706, 1250, 1251, 1252, 1280}
Information Release Memo
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
CAT REMAN BRINGS TO THE MARKET SEVERAL NEW FUEL INJECTOR AND PUMP SOLUTIONS
CAT REMAN BRINGS TO THE MARKET SEVERAL NEW FUEL INJECTOR AND PUMP SOLUTIONS
Service Magazine
Do Not Reuse the Hold Down Bolts for the Fuel Injectors On All Products that Contain C9 Through C32 Engines {1290}
2014/08/14
Improved Heavy Duty Tier 3 and Tier 4 Injectors Are Now Used on Certain Machine Engines {1251, 1254, 1290, 1713}
2015/06/22
Tool Operating Manual
169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}
169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}
169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}
Information Release Memo
CAT REMAN BRINGS TO THE MARKET SEVERAL NEW FUEL INJECTOR AND PUMP SOLUTIONS
CAT REMAN BRINGS TO THE MARKET SEVERAL NEW FUEL INJECTOR AND PUMP SOLUTIONS
Operation and Maintenance Manual
Electronic Unit Injector - Inspect/Adjust
980K Wheel Loader
Special Instruction
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Specifications
Electronic Unit Injector Mechanism
C13 Engines for Caterpillar Built Machines
Electronic Unit Injector
C13 Engines for Caterpillar Built Machines
Electronic Unit Injector Wiring
C13 Engines for Caterpillar Built Machines
Tool Operating Manual
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the TMI System to Retrieve Off Engine Injection Pump Test Specifications for the Fuel Injection Equipment Test Stand{0706, 0782, 1251, 1286}
Using the TMI System to Retrieve Off Engine Injection Pump Test Specifications for the Fuel Injection Equipment Test Stand{0706, 0782, 1251, 1286}
Testing and Adjusting Fuel Injection Pump and Governor on 3064 and 3066 Engines{0374, 0599, 0706}
Testing and Adjusting Fuel Injection Pump and Governor on 3064 and 3066 Engines{0374, 0599, 0706}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}
169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}
Reuse And Salvage Guidelines
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
Information Release Memo
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
CAT REMAN BRINGS TO THE MARKET SEVERAL NEW FUEL INJECTOR AND PUMP SOLUTIONS
CAT REMAN BRINGS TO THE MARKET SEVERAL NEW FUEL INJECTOR AND PUMP SOLUTIONS
Testing and Adjusting
Electronic Unit Injector - Test
C13 Engines for Caterpillar Built Machines
Troubleshooting
Injector Trim File - Install
C13, C15, and C18 Tier 4 Interim Engines
Injector Solenoid - Test
C13, C15, and C18 Tier 4 Interim Engines
Disassembly and Assembly
Electronic Unit Injector - Remove and Install
C13
Engines for Caterpillar Built Machines
Service Magazine
Do Not Reuse the Hold Down Bolts for the Fuel Injectors On All Products that Contain C9 Through C32 Engines {1290}
2014/08/14
A New Improved Removal and Installation of the Injector Harness Procedure is Now Used on Certain C13, C15 and C18 Engines {1251, 1408}
2014/08/25
Cat&reg; Reman Announces New Fuel Pump, Fuel Ratio Control, and Fuel Injector Options for Certain Machine Engines {1251, 1278}
2014/09/04
An Improved Installation Procedure for the Injector Top O-Ring Seal on C27 and C32 Machine Engines {1251, 1254, 1290, 1713}
2014/10/27
Improved Heavy Duty Tier 3 and Tier 4 Injectors Are Now Used on Certain Machine Engines {1251, 1254, 1290, 1713}
2015/06/22
Truck Engine News
An Improved Hand Operated Fuel Priming Pump Is Available {1258}
2012/11/26
Engine News
An Improved Hand Operated Fuel Priming Pump Is Available {1258}
2012/10/08
Operation and Maintenance Manual
Fuel Priming Pump - Replace
980K Wheel Loader
Fuel System - Prime
980K Wheel Loader
Fuel System Primary Filter (Water Separator) - Drain
980K Wheel Loader
Fuel System Primary Filter (Water Separator) Element - Replace
980K Wheel Loader
Special Instruction
Procedure to Repair the Pump for the Aftertreatment Regeneration Device (ARD) {1258}
Procedure to Repair the Pump for the Aftertreatment Regeneration Device (ARD) {1258}
Technical Information Bulletin
Inspect the Fuel Filter and Water Separator for Damage Prior to Installation on Certain Caterpillar Equipment{1258, 1260, 1261}
Inspect the Fuel Filter and Water Separator for Damage Prior to Installation on Certain Caterpillar Equipment{1258, 1260, 1261}
Specifications
Fuel Priming Pump and Primary Fuel Filter - With Water Separator
C13 Engines for Caterpillar Built Machines
Tool Operating Manual
Using the TMI System to Retrieve Off Engine Injection Pump Test Specifications for the Fuel Injection Equipment Test Stand{0706, 0782, 1251, 1286}
Using the TMI System to Retrieve Off Engine Injection Pump Test Specifications for the Fuel Injection Equipment Test Stand{0706, 0782, 1251, 1286}
Testing and Adjusting Fuel Injection Pump and Governor on 3064 and 3066 Engines{0374, 0599, 0706}
Testing and Adjusting Fuel Injection Pump and Governor on 3064 and 3066 Engines{0374, 0599, 0706}
Testing and Adjusting
Fuel System - Prime
C13 Engines for Caterpillar Built Machines
Disassembly and Assembly
Fuel Priming Pump - Remove and Install
C13
Engines for Caterpillar Built Machines
Fuel Priming Pump and Primary Filter (Water Separator) - Remove and Install
980K Wheel Loader C13 Engine Supplement
Fuel Filter (Secondary) and Fuel Filter Base - Remove and Install
980K Wheel Loader C13 Engine Supplement
Service Magazine
Improved Fuel Priming Pump Groups and Fuel Pump Groups Are Used on Certain Tier 4 Interim Machines {1256, 1258}
2012/02/09
An Improved Hand Operated Fuel Priming Pump Is Available {1258}
2012/10/04
Engine News
New Fuel Transfer Pumps Are Now Used for Certain C27 and C32 Commercial Engines {1256}
2014/04/11
Tool Operating Manual
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
Testing and Adjusting
Fuel System Pressure - Test
C13 Engines for Caterpillar Built Machines
Disassembly and Assembly
Fuel Transfer Pump - Remove and Install
C13
Engines for Caterpillar Built Machines
Fuel Transfer Pump - Remove and Install
980K Wheel Loader C13 Engine Supplement
Service Magazine
Improved Fuel Priming Pump Groups and Fuel Pump Groups Are Used on Certain Tier 4 Interim Machines {1256, 1258}
2012/02/09
A New Fuel Transfer Pump Is Now Available for Certain C11 through C18 Machine Engines {1256}
2013/01/21
Tool Operating Manual
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
Specifications
Fuel Pressure Regulator
C13 Engines for Caterpillar Built Machines
Disassembly and Assembly
Fuel Pressure Regulator - Remove and Install
C13
Engines for Caterpillar Built Machines
Operation and Maintenance Manual
Fuel System Primary Filter (Water Separator) - Drain
980K Wheel Loader
Fuel System Primary Filter (Water Separator) Element - Replace
980K Wheel Loader
Troubleshooting
Fuel System Water Separator Has Water
C13, C15, and C18 Tier 4 Interim Engines
Disassembly and Assembly
Fuel Priming Pump and Primary Filter (Water Separator) - Remove and Install
980K Wheel Loader C13 Engine Supplement
Service Magazine
Troubleshooting the "Water Separator Has Water" Warning Message {1263, 1439}
2011/12/22
New Liquid Level Sensor Gp Is Now Used as Service Replacement on Certain Cat Products {1263, 7422}
2013/04/02
Operation and Maintenance Manual
Fuel Tank Water and Sediment - Drain
980K Wheel Loader
Fuel Tank Cap and Strainer - Clean
980K Wheel Loader
Fuel Tank Strainer - Clean
980K Wheel Loader
Fuel Tank Cap Filter - Replace
980K Wheel Loader
Service Letter-NACD
PRODUCT SUPPORT PROGRAM FOR REPAINTING THE FUEL TANK ON CERTAIN 980K WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR REPAINTING THE FUEL TANK ON CERTAIN 980K WHEEL LOADERS
Service Letter-Australia
Service Letter-CFEL
Specifications
Fuel Level Sender
980K Wheel Loader Machine Systems
Tool Operating Manual
NEHS1126: <NOBR>370-8570</NOBR> Bulk Fuel Filtration Group 200 GPM Flow Rate {0599, 0680, 0706, 0782, 1250, 1280}
NEHS1126: 370-8570 Bulk Fuel Filtration Group 200 GPM Flow Rate {0599, 0680, 0706, 0782, 1250, 1280}
370-8568 Bulk Fuel Filtration Group 50 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
370-8568 Bulk Fuel Filtration Group 50 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
284-0413 Bulk Fuel Filtration Group 50 GPM Flow Rate{0680, 0782, 1250, 1280}
284-0413 Bulk Fuel Filtration Group 50 GPM Flow Rate{0680, 0782, 1250, 1280}
284-0415 Bulk Fuel Filtration Group 100 GPM Flow Rate{0680, 0782, 1250, 1280}
284-0415 Bulk Fuel Filtration Group 100 GPM Flow Rate{0680, 0782, 1250, 1280}
284-0416 Bulk Fuel Filtration Group 200 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
284-0416 Bulk Fuel Filtration Group 200 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
295-0048 Bulk Fuel Filtration Group 300 GPM Flow Rate{0374, 0599, 0680, 0706, 1250, 1261, 1280}
295-0048 Bulk Fuel Filtration Group 300 GPM Flow Rate{0374, 0599, 0680, 0706, 1250, 1261, 1280}
370-8569 Bulk Fuel Filtration Group 100 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
370-8569 Bulk Fuel Filtration Group 100 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
370-8571 Bulk Fuel Filtration Group 300 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
370-8571 Bulk Fuel Filtration Group 300 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
Service Letter-China
PRODUCT SUPPORT PROGRAM FOR REPAINTING THE FUEL TANK ON CERTAIN 980K WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR REPAINTING THE FUEL TANK ON CERTAIN 980K WHEEL LOADERS
Service Letter-Asia
Service Letter-APD
Disassembly and Assembly
Fuel Tank - Remove and Install
980K Wheel Loader Machine Systems
Service Magazine
Updated Fuel Tank Caps are Now Available {1273}
2014/01/24
Technical Information Bulletin
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
Tool Operating Manual
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-7840 Fuel Injection Equipment Calibration Fluid Test Kit{0374, 0599, 0706}
9U-7840 Fuel Injection Equipment Calibration Fluid Test Kit{0374, 0599, 0706}
NEHS1126: <NOBR>370-8570</NOBR> Bulk Fuel Filtration Group 200 GPM Flow Rate {0599, 0680, 0706, 0782, 1250, 1280}
NEHS1126: 370-8570 Bulk Fuel Filtration Group 200 GPM Flow Rate {0599, 0680, 0706, 0782, 1250, 1280}
Using the Cat 179-0710 Burn Rate Fuel Flow Measurement System {0374, 0599, 0706, 1250, 1280}
Using the Cat 179-0710 Burn Rate Fuel Flow Measurement System {0374, 0599, 0706, 1250, 1280}
370-8568 Bulk Fuel Filtration Group 50 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
370-8568 Bulk Fuel Filtration Group 50 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
284-0413 Bulk Fuel Filtration Group 50 GPM Flow Rate{0680, 0782, 1250, 1280}
284-0413 Bulk Fuel Filtration Group 50 GPM Flow Rate{0680, 0782, 1250, 1280}
284-0415 Bulk Fuel Filtration Group 100 GPM Flow Rate{0680, 0782, 1250, 1280}
284-0415 Bulk Fuel Filtration Group 100 GPM Flow Rate{0680, 0782, 1250, 1280}
284-0416 Bulk Fuel Filtration Group 200 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
284-0416 Bulk Fuel Filtration Group 200 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
295-0048 Bulk Fuel Filtration Group 300 GPM Flow Rate{0374, 0599, 0680, 0706, 1250, 1261, 1280}
295-0048 Bulk Fuel Filtration Group 300 GPM Flow Rate{0374, 0599, 0680, 0706, 1250, 1261, 1280}
370-8569 Bulk Fuel Filtration Group 100 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
370-8569 Bulk Fuel Filtration Group 100 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
370-8571 Bulk Fuel Filtration Group 300 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
370-8571 Bulk Fuel Filtration Group 300 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the TMI System to Retrieve Off Engine Injection Pump Test Specifications for the Fuel Injection Equipment Test Stand{0706, 0782, 1251, 1286}
Using the TMI System to Retrieve Off Engine Injection Pump Test Specifications for the Fuel Injection Equipment Test Stand{0706, 0782, 1251, 1286}
Testing and Adjusting Fuel Injection Pump and Governor on 3064 and 3066 Engines{0374, 0599, 0706}
Testing and Adjusting Fuel Injection Pump and Governor on 3064 and 3066 Engines{0374, 0599, 0706}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
146-1738 Precision Borescope (Hawkeye){0599, 0614, 0644, 0701, 0706, 0708, 0727, 0738}
146-1738 Precision Borescope (Hawkeye){0599, 0614, 0644, 0701, 0706, 0708, 0727, 0738}
169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}
169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}
398-9680 Calibration Test Group{0599, 0706, 1250, 1251, 1252, 1280}
398-9680 Calibration Test Group{0599, 0706, 1250, 1251, 1252, 1280}
NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}
NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}
131-5051 Dataview Group and Dataview Portable Tech Station Group{0374, 0599, 0701, 0709}
131-5051 Dataview Group and Dataview Portable Tech Station Group{0374, 0599, 0701, 0709}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
Reuse And Salvage Guidelines
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
Troubleshooting
Solenoid Valve - Test
C13, C15, and C18 Tier 4 Interim Engines
Disassembly and Assembly
Cooling System Package (Radiator, Fan Group, Fuel Cooler, Aftercooler, Hydraulic Oil Cooler, Refrigerant Condenser) - Remove and Install
980K Wheel Loader C13 Engine Supplement

Truck sale:

Caterpillar 980K
 
Caterpillar 980K
- Wheel Loaders
FOLEY, INC.
Caterpillar 980K, Wheel Loaders, Construction
114,025 
Caterpillar 980K, Wheel Loaders, Construction
- Wheel Loaders
BERGERAT MONNOYEUR S.A.S.
Caterpillar 980K, Wheel Loaders, Construction
218,068 
Caterpillar 980K, Wheel Loaders, Construction
- Wheel Loaders
MILTON CAT
Caterpillar 980K, Wheel Loaders, Construction
175,376 
Caterpillar 980K, Wheel Loaders, Construction
- Wheel Loaders
BERGERAT MONNOYEUR S.A.S.
Caterpillar 980K, Wheel Loaders, Construction
219,844 
Caterpillar 980K, Wheel Loaders, Construction
- Wheel Loaders
CAVPOWER
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.