ELECTRICAL AND STARTING SYSTEM
SWITCH GPWIRING GP
ELECTRICAL AND STARTING SYSTEM
SWITCH GP
#SEBC15430020
158-6634: SWITCH GP-TOGGLE
158-6634 SWITCH GP-TOGGLE -GROUND LEVEL SHUTDOWN
PART OF 378-6424 WIRING GP-REAR
PART OF 378-6424 WIRING GP-REAR
For full view, you need register
Parts for your 980K WHEEL LOADER:
CATERPILLAR SIS#SEBC15430021
297-8752: SWITCH GP-TOGGLE
297-8752 SWITCH GP-TOGGLE -ENGINE SHUTOFF
PART OF 377-3559 WIRING GP-PROTECTION
PART OF 377-3559 WIRING GP-PROTECTION
For full view, you need register
Parts for your 980K WHEEL LOADER:
CATERPILLAR SIS#SEBC15430022
375-9858: WIRING GP-CAB
For full view, you need register
Parts for your 980K WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3E-5239 | [1] | RELAY AS (24-VOLT)(TRANSMISSION OVERRIDE) | |
| 1A. | 3E-5239 | [1] | RELAY AS (24-VOLT)(TRANSMISSION INPUT) | |
| 1B. | 3E-5239 | [1] | RELAY AS (24-VOLT)(BACKUP ALARM) | |
| 1C. | 3E-5239 | [1] | RELAY AS (24-VOLT)(PARKING BRAKE) | |
| 1D. | 3E-5239 | [1] | RELAY AS (24-VOLT)(FORWARD SOLENOID DISCONNECT) | |
| 1E. | 3E-5239 | [1] | RELAY AS (24-VOLT)(FIRST SOLENOID DISCONNECT) | |
| 1F. | 3E-5239 | [1] | RELAY AS (24-VOLT)(REVERSE SOLENOID DISCONNECT) | |
| 1G. | 3E-5239 | [1] | RELAY AS (24-VOLT)(COMMON SOLENOID DISCONNECT) | |
| 2. | 6I-1418 | [3] | SPACER (8.2X12.7X28.7-MM THK) | |
| 3. | 7K-1181 | [27] | STRAP-CABLE | |
| 4. | 8T-4205 | [12] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 5. | 8T-9655 | [6] | MOUNT-ISOLATION | |
| 6. | 128-4249 | [1] | LOCKWASHER | |
| 7. | 132-8487 | [1] | NUT-RING | |
| 8. | 192-1590 Y | [1] | CONTROL GP-UNPROGRAMMED (POWER TRAIN) | |
| 9. | 200-1898 | [2] | SUPPRESSOR-ARC | |
| 10. | 211-0052 | [1] | NUT (1-11/16-18-THD) | |
| 11. | 249-1293 | [1] | FILM-INSTRUCTION (ELECTRICAL POWER) | |
| 12. | 249-5483 | [1] | SWITCH AS-ROCKER (24-VOLT)(ENGINE SHUTDOWN) | |
| 13. | 284-7623 | [4] | SPACER (12.7X21X12-MM THK) | |
| 14. | 308-3529 | [1] | SWITCH AS-TOGGLE (TRANSMISSION OVERRIDE CONTROL) | |
| 6T-3631 | [2] | NUT-HEX (15/32-32-THD) | ||
| 6T-3632 | [1] | LOCKWASHER | ||
| 6T-3633 | [1] | RING-LOCKING | ||
| 8T-8729 | [12] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 230-4010 | [1] | RECEPTACLE AS-CONNECTOR (12-PIN) | ||
| 15. | 315-3232 | [1] | LAMP AS-INDICATOR (24-VOLT, GREEN)(PARKING BRAKE OVERRIDE) | |
| 8T-8729 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 16. | 368-4538 | [1] | SWITCH AS-ROCKER (POWER) | |
| 17. | 375-9856 | [1] | HARNESS AS-CAB | |
| 3E-5519 | [8] | PLUG AS-CONNECTOR (5-PIN) | ||
| 155-2270 | [1] | KIT-CONNECTING PLUG (2-PIN) | ||
| 155-2271 | [1] | KIT-CONNECTING PLUG (4-PIN) | ||
| 155-2270 | [1] | KIT-CONNECTING PLUG (2-PIN) | ||
| 245-7434 | [1] | KIT-CONNECTING PLUG (10-PIN) | ||
| (EACH KIT-CONNECTING PLUG INCLUDES PLUG AS AND WEDGE) | ||||
| 18. | 376-2327 | [2] | BRACKET AS | |
| (EACH INCLUDES) | ||||
| 6V-9632 M | [4] | NUT-WELD (M6X1-THD) | ||
| 19. | 376-3067 | [1] | PLATE | |
| 20. | 376-3099 | [1] | GASKET | |
| 21. | 376-9132 | [1] | FILM-INFORMATION (TRANSMISSION CONTROL) | |
| 22. | 376-9133 | [1] | FILM-INFORMATION (ENGINE CONTROL) | |
| 23. | 378-4319 | [1] | BRACKET AS | |
| 8T-3612 M | [3] | NUT-WELD (M8X1.25-THD) | ||
| 24. | 378-4320 | [1] | BRACKET AS | |
| 8T-3612 M | [3] | NUT-WELD (M8X1.25-THD) | ||
| 25. | 388-8723 | [1] | BRACKET AS | |
| 6V-9632 M | [1] | NUT-WELD (M6X1-THD) | ||
| 26. | 388-8724 | [1] | COVER | |
| 27. | 389-5719 | [1] | COVER-CONSOLE | |
| 28. | 389-8166 | [1] | COVER-COLUMN | |
| 29. | 103-6262 | [4] | SCREW-MACHINE (4-40X0.63-IN) | |
| 30. | 114-6658 | [6] | WASHER (6.5X17X1-MM THK) | |
| 31. | 127-2170 M | [3] | SCREW-TRUSS HEAD (M8X1.25X20-MM) | |
| 32. | 274-7409 | [3] | SCREW-TRUSS HEAD (M8X1.25X45-MM) | |
| 33. | 3T-2662 | [1] | CIRCUIT BREAKER AS (15-AMPERE, AUTOMATIC RESET)(PARKING BRAKE OVERRIDE) | |
| 6V-8376 | [2] | SCREW-MACHINE (8-32X0.25-IN) | ||
| 9B-7233 | [2] | LOCKWASHER | ||
| 34. | 5M-2894 | [6] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 35. | 6V-4248 M | [6] | BOLT (M10X1.5X25-MM) | |
| 36. | 6V-8225 M | [2] | NUT (M6X1-THD) | |
| 37. | 6V-8490 M | [4] | BOLT (M6X1X25-MM) | |
| 38. | 8T-4171 M | [8] | BOLT (M6X1X12-MM) | |
| 39. | 9N-0869 | [3] | WASHER-HARD (8.8X25.5X2-MM THK) | |
| 40. | 9X-2043 M | [4] | SCREW-TRUSS HEAD (M6X1X14-MM) | |
| 41. | 9X-8486 | [2] | SCREW-MACHINE (8-32X0.75-IN) | |
| ****STANDARD REMOVAL**** | ||||
| 296-3728 FJ | [1] | COVER-CONSOLE | ||
| 346-1063 FJ | [1] | PLATE | ||
| 346-1064 FJ | [1] | GASKET | ||
| 346-1059 FL | [1] | BRACKET AS | ||
| 296-3727 FN | [1] | COVER-COLUMN | ||
| F | NOT SHOWN | |||
| J | PART OF STANDARD CAB AR | |||
| L | PART OF STANDARD WIRING GP-CAB | |||
| M | METRIC PART | |||
| N | PART OF STANDARD PANEL GP-INSTRUMENT | |||
| R | REMFG PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBC15430023
375-9858: WIRING GP-CAB
For full view, you need register
Parts for your 980K WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3E-5239 | [1] | RELAY AS (24-VOLT)(TRANSMISSION OVERRIDE) | |
| 1A. | 3E-5239 | [1] | RELAY AS (24-VOLT)(TRANSMISSION INPUT) | |
| 1B. | 3E-5239 | [1] | RELAY AS (24-VOLT)(BACKUP ALARM) | |
| 1C. | 3E-5239 | [1] | RELAY AS (24-VOLT)(PARKING BRAKE) | |
| 1D. | 3E-5239 | [1] | RELAY AS (24-VOLT)(FORWARD SOLENOID DISCONNECT) | |
| 1E. | 3E-5239 | [1] | RELAY AS (24-VOLT)(FIRST SOLENOID DISCONNECT) | |
| 1F. | 3E-5239 | [1] | RELAY AS (24-VOLT)(REVERSE SOLENOID DISCONNECT) | |
| 1G. | 3E-5239 | [1] | RELAY AS (24-VOLT)(COMMON SOLENOID DISCONNECT) | |
| 2. | 6I-1418 | [3] | SPACER (8.2X12.7X28.7-MM THK) | |
| 3. | 7K-1181 | [27] | STRAP-CABLE | |
| 4. | 8T-4205 | [12] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 5. | 8T-9655 | [6] | MOUNT-ISOLATION | |
| 6. | 113-8490 C | [1] | FUSE (10-AMPERE) | |
| 7. | 128-4249 | [1] | LOCKWASHER | |
| 8. | 132-8487 | [1] | NUT-RING | |
| 9. | 192-1590 Y | [1] | CONTROL GP-UNPROGRAMMED (POWER TRAIN) | |
| 10. | 200-1898 | [2] | SUPPRESSOR-ARC | |
| 11. | 211-0052 | [1] | NUT (1-11/16-18-THD) | |
| 12. | 249-1293 | [1] | FILM-INSTRUCTION (ELECTRICAL POWER) | |
| 13. | 249-5483 | [1] | SWITCH AS-ROCKER (24-VOLT)(ENGINE SHUTDOWN) | |
| 14. | 284-7623 | [4] | SPACER (12.7X21X12-MM THK) | |
| 15. | 308-3529 | [1] | SWITCH AS-TOGGLE (TRANSMISSION OVERRIDE CONTROL) | |
| 6T-3631 | [2] | NUT-HEX (15/32-32-THD) | ||
| 6T-3632 | [1] | LOCKWASHER | ||
| 6T-3633 | [1] | RING-LOCKING | ||
| 8T-8729 | [12] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 230-4010 | [1] | RECEPTACLE AS-CONNECTOR (12-PIN) | ||
| 16. | 315-3232 | [1] | LAMP AS-INDICATOR (24-VOLT, GREEN)(PARKING BRAKE OVERRIDE) | |
| 8T-8729 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 17. | 368-4538 | [1] | SWITCH AS-ROCKER (POWER) | |
| 18. | 376-2327 | [2] | BRACKET AS | |
| (EACH INCLUDES) | ||||
| 6V-9632 M | [4] | NUT-WELD (M6X1-THD) | ||
| 19. | 376-3067 | [1] | PLATE | |
| 20. | 376-3099 | [1] | GASKET | |
| 21. | 376-9132 | [1] | FILM-INFORMATION (TRANSMISSION CONTROL) | |
| 22. | 376-9133 | [1] | FILM-INFORMATION (ENGINE CONTROL) | |
| 23. | 378-4319 | [1] | BRACKET AS | |
| 8T-3612 M | [3] | NUT-WELD (M8X1.25-THD) | ||
| 24. | 378-4320 | [1] | BRACKET AS | |
| 8T-3612 M | [3] | NUT-WELD (M8X1.25-THD) | ||
| 25. | 388-8723 | [1] | BRACKET AS | |
| 6V-9632 M | [1] | NUT-WELD (M6X1-THD) | ||
| 26. | 388-8724 | [1] | COVER | |
| 27. | 389-5719 | [1] | COVER-CONSOLE | |
| 28. | 389-8166 | [1] | COVER-COLUMN | |
| 29. | 398-4064 C | [1] | HARNESS AS-CAB | |
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS AND WEDGE) | ||||
| 155-2270 | [2] | KIT-CONNECTING PLUG (2-PIN) | ||
| 155-2271 | [2] | KIT-CONNECTING PLUG (4-PIN) | ||
| 155-2270 | [3] | KIT-CONNECTING PLUG (2-PIN) | ||
| 155-2271 | [2] | KIT-CONNECTING PLUG (4-PIN) | ||
| 245-7434 | [2] | KIT-CONNECTING PLUG (10-PIN) | ||
| (EACH KIT-CONNECTING PLUG INCLUDES PLUG AS AND WEDGE) | ||||
| 30. | 103-6262 | [4] | SCREW-MACHINE (4-40X0.63-IN) | |
| 31. | 114-6658 | [6] | WASHER (6.5X17X1-MM THK) | |
| 32. | 127-2170 M | [3] | SCREW-TRUSS HEAD (M8X1.25X20-MM) | |
| 33. | 274-7409 | [3] | SCREW-TRUSS HEAD (M8X1.25X45-MM) | |
| 34. | 3T-2662 | [1] | CIRCUIT BREAKER AS (15-AMPERE, AUTOMATIC RESET)(PARKING BRAKE OVERRIDE) | |
| 6V-8376 | [2] | SCREW-MACHINE (8-32X0.25-IN) | ||
| 9B-7233 | [2] | LOCKWASHER | ||
| 35. | 5M-2894 | [6] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 36. | 6V-4248 M | [6] | BOLT (M10X1.5X25-MM) | |
| 37. | 6V-8225 M | [2] | NUT (M6X1-THD) | |
| 38. | 6V-8490 M | [4] | BOLT (M6X1X25-MM) | |
| 39. | 8T-4171 M | [8] | BOLT (M6X1X12-MM) | |
| 40. | 9N-0869 | [3] | WASHER-HARD (8.8X25.5X2-MM THK) | |
| 41. | 9X-2043 M | [4] | SCREW-TRUSS HEAD (M6X1X14-MM) | |
| 42. | 9X-8486 | [2] | SCREW-MACHINE (8-32X0.75-IN) | |
| ****STANDARD REMOVAL**** | ||||
| 296-3728 FJ | [1] | COVER-CONSOLE | ||
| 346-1063 FJ | [1] | PLATE | ||
| 346-1064 FJ | [1] | GASKET | ||
| 346-1059 FL | [1] | BRACKET AS | ||
| 296-3727 FN | [1] | COVER-COLUMN | ||
| C | CHANGE FROM PREVIOUS TYPE | |||
| F | NOT SHOWN | |||
| J | PART OF STANDARD CAB AR | |||
| L | PART OF STANDARD WIRING GP-CAB | |||
| M | METRIC PART | |||
| N | PART OF STANDARD PANEL GP-INSTRUMENT | |||
| R | REMFG PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBC15430024
375-9858: WIRING GP-CAB
For full view, you need register
Parts for your 980K WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3E-5239 | [1] | RELAY AS (24-VOLT)(TRANSMISSION INPUT) | |
| 1B. | 3E-5239 | [1] | RELAY AS (24-VOLT)(BACKUP ALARM) | |
| 1D. | 3E-5239 | [1] | RELAY AS (24-VOLT)(FORWARD SOLENOID DISCONNECT) | |
| 1E. | 3E-5239 | [1] | RELAY AS (24-VOLT)(FIRST SOLENOID DISCONNECT) | |
| 1F. | 3E-5239 | [1] | RELAY AS (24-VOLT)(REVERSE SOLENOID DISCONNECT) | |
| 1G. | 3E-5239 | [1] | RELAY AS (24-VOLT)(COMMON SOLENOID DISCONNECT) | |
| 2. | 7K-1181 C | [28] | STRAP-CABLE | |
| 3. | 8R-9137 C | [1] | ANGLE | |
| 4. | 8T-4205 C | [10] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 5. | 128-4249 | [1] | LOCKWASHER | |
| 6. | 132-1829 CY | [1] | ALARM GP (24-VOLT) | |
| 7. | 159-9495 C | [1] | NUT (1-1/2-18-THD) | |
| 8. | 192-1590 Y | [1] | CONTROL GP-UNPROGRAMMED (POWER TRAIN) | |
| 9. | 200-1898 | [2] | SUPPRESSOR-ARC | |
| 10. | 211-0052 | [1] | NUT (1-11/16-18-THD) | |
| 11. | 249-1293 | [1] | FILM-INSTRUCTION (ELECTRICAL POWER) | |
| 12. | 284-7623 | [4] | SPACER (12.7X21X12-MM THK) | |
| 13. | 308-3529 | [1] | SWITCH AS-TOGGLE (TRANSMISSION OVERRIDE CONTROL) | |
| 6T-3631 | [2] | NUT-HEX (15/32-32-THD) | ||
| 6T-3632 | [1] | LOCKWASHER | ||
| 6T-3633 | [1] | RING-LOCKING | ||
| 8T-8729 | [12] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 230-4010 | [1] | RECEPTACLE AS-CONNECTOR (12-PIN) | ||
| 14. | 311-2813 C | [1] | SEAL | |
| 15. | 315-3232 | [1] | LAMP AS-INDICATOR (24-VOLT, GREEN)(PARKING BRAKE OVERRIDE) | |
| 8T-8729 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 16. | 339-2958 C | [1] | GASKET | |
| 17. | 368-4538 | [1] | SWITCH AS-ROCKER (POWER) | |
| 18. | 376-2327 | [2] | BRACKET AS | |
| (EACH INCLUDES) | ||||
| 6V-9632 M | [4] | NUT-WELD (M6X1-THD) | ||
| 19. | 376-9132 | [1] | FILM-INFORMATION (TRANSMISSION CONTROL) | |
| 20. | 376-9133 | [1] | FILM-INFORMATION (ENGINE CONTROL) | |
| 21. | 378-4319 | [1] | BRACKET AS | |
| 8T-3612 M | [3] | NUT-WELD (M8X1.25-THD) | ||
| 22. | 378-4320 | [1] | BRACKET AS | |
| 8T-3612 M | [3] | NUT-WELD (M8X1.25-THD) | ||
| 23. | 388-8723 | [1] | BRACKET AS | |
| 6V-9632 M | [1] | NUT-WELD (M6X1-THD) | ||
| 24. | 388-8724 | [1] | COVER | |
| 25. | 389-5719 | [1] | COVER-CONSOLE | |
| 26. | 389-8166 | [1] | COVER-COLUMN | |
| 27. | 424-4908 | [1] | SWITCH AS-ROCKER (ENGINE SHUTDOWN) | |
| 28. | C | [1] | HARNESS AS-CAB | |
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS AND WEDGE) | ||||
| 155-2270 | [3] | KIT-CONNECTING PLUG (2-PIN) | ||
| 155-2271 | [2] | KIT-CONNECTING PLUG (4-PIN) | ||
| 245-7434 | [2] | KIT-CONNECTING PLUG (10-PIN) | ||
| (EACH KIT CONNECTING PLUG INCLUDES PLUG AS AND WEDGE) | ||||
| 29. | 434-0575 C | [1] | PLATE | |
| 30. | 434-1879 C | [1] | GASKET | |
| 31. | 8T-9655 | [6] | MOUNT-ISOLATION | |
| 32. | 114-6658 | [6] | WASHER (6.5X17X1-MM THK) | |
| 33. | 127-2170 M | [3] | SCREW-TRUSS HEAD (M8X1.25X20-MM) | |
| 34. | 159-9496 C | [1] | LOCKWASHER | |
| 35. | 274-7409 | [3] | SCREW-TRUSS HEAD (M8X1.25X45-MM) | |
| 36. | 3S-2093 C | [1] | STRAP-CABLE | |
| 37. | 3T-2662 | [1] | CIRCUIT BREAKER AS (15-AMPERE, AUTOMATIC RESET)(PARKING BRAKE OVERRIDE) | |
| 6V-8376 | [2] | SCREW-MACHINE (8-32X0.25-IN) | ||
| 9B-7233 | [2] | LOCKWASHER | ||
| 38. | 5M-2894 | [6] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 39. | 6I-1418 | [3] | SPACER (8.2X12.7X28.7-MM THK) | |
| 40. | 6V-4248 M | [6] | BOLT (M10X1.5X25-MM) | |
| 41. | 6V-8225 M | [2] | NUT (M6X1-THD) | |
| 42. | 6V-8490 M | [4] | BOLT (M6X1X25-MM) | |
| 43. | 8T-4121 C | [2] | WASHER-HARD (11X21X2.5-MM THK) | |
| 44. | 8T-4133 CM | [1] | NUT (M10X1.5-THD) | |
| 45. | 8T-4137 CM | [1] | BOLT (M10X1.5X20-MM) | |
| 46. | 8T-4171 CM | [6] | BOLT (M6X1X12-MM) | |
| 47. | 9N-0869 | [3] | WASHER-HARD (8.8X25.5X2-MM THK) | |
| 48. | 9X-2043 CM | [3] | SCREW-TRUSS HEAD (M6X1X14-MM) | |
| 49. | 9X-2045 M | [1] | SCREW-TRUSS HEAD (M6X1X20-MM) | |
| 50. | 9X-8486 | [2] | SCREW-MACHINE (8-32X0.75-IN) | |
| ****STANDARD REMOVAL**** | ||||
| 296-3728 FJ | [1] | COVER-CONSOLE | ||
| 346-1063 FJ | [1] | PLATE | ||
| 346-1064 FJ | [1] | GASKET | ||
| 346-1059 FL | [1] | BRACKET AS | ||
| 296-3727 FN | [1] | COVER-COLUMN | ||
| C | CHANGE FROM PREVIOUS TYPE | |||
| F | NOT SHOWN | |||
| J | PART OF STANDARD CAB AR | |||
| L | PART OF STANDARD WIRING GP-CAB | |||
| M | METRIC PART | |||
| N | PART OF STANDARD PANEL GP-INSTRUMENT | |||
| R | REMFG PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBC15430025
377-3559: WIRING GP-PROTECTION
377-3559 WIRING GP-PROTECTION -CHASSIS
CUSTOM
PART OF 378-2590 WIRING GP-PROTECTION
CUSTOM
PART OF 378-2590 WIRING GP-PROTECTION
For full view, you need register
Parts for your 980K WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 297-8752 Y | [1] | SWITCH GP-TOGGLE (ENGINE SHUTOFF) | |
| 2. | 354-6964 | [1] | HARNESS AS-BRAKE | |
| 8T-8737 | [7] | PLUG-SEAL | ||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(5-CM) | |||
| 9X-3402 | [35] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1768 | [35] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 155-2270 | [1] | KIT-CONNECTING PLUG (2-PIN) | ||
| (INCLUDES PLUG AS AND WEDGE) | ||||
| 230-4009 | [1] | PLUG AS-CONNECTOR (12-PIN) | ||
| 264-7034 | [1] | SEAL-CONNECTOR | ||
| 237-0227 | [2] | PLUG AS-CONNECTOR (3-PIN) | ||
| (EACH INCLUDES) | ||||
| 264-7030 | [1] | SEAL-CONNECTOR | ||
| 239-7356 | [1] | PLUG AS-CONNECTOR (12-PIN) | ||
| 264-7034 | [1] | SEAL-CONNECTOR | ||
| 3. | 354-6965 | [1] | HARNESS AS-CHASSIS | |
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 110-6845 | [1] | PLUG AS-CONNECTOR (40-PIN) | ||
| 129-1966 | [1] | GREASE-MULTIPURPOSE | ||
| 110-6844 | [1] | SEAL | ||
| 110-6846 | [1] | PLUG AS-CONNECTOR (40-PIN) | ||
| 129-1966 | [1] | GREASE-MULTIPURPOSE | ||
| 110-6844 | [1] | SEAL | ||
| 3S-2093 | [7] | STRAP-CABLE | ||
| 160-2248 G | SLEEVE-ABRASION (26.8-IN) | |||
| 7K-1181 | [1] | STRAP-CABLE | ||
| 8N-1544 | [1] | PIN-CONNECTOR (8-GA) | ||
| 8T-8737 | [85] | PLUG-SEAL | ||
| 9X-6772 | [4] | STRAP-CABLE | ||
| 100-6674 | [2] | SEAL-CONNECTOR | ||
| 119-3662 E | TUBE-HEAT SHRINK (10.85-MM DIA)(39-CM) | |||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(50-CM) | |||
| 125-7875 E | TUBE-HEAT SHRINK (7.44-MM DIA)(55-CM) | |||
| 9X-3402 | [269] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1768 | [269] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 126-1774 | [2] | COVER-CONNECTOR | ||
| 127-5486 | [1] | RECEPTACLE AS-CONNECTOR (1-PIN) | ||
| 128-4168 | [1] | TERMINAL AS | ||
| 2L-8051 | [1] | TERMINAL-RING (6-GA, 5/16-IN SCREW) | ||
| -OR- | ||||
| 5P-3455 | [1] | TERMINAL-RING (8-GA, 5/16-IN SCREW) | ||
| 6V-9023 E | TUBE-HEAT SHRINK (12.7-MM DIA)(4-CM) | |||
| 131-1488 | [1] | TERMINAL AS-RING (6-GA TO 8-GA) | ||
| 2L-8050 | [1] | TERMINAL-RING (6-GA, 1/4-IN SCREW) | ||
| -OR- | ||||
| 2L-8058 | [1] | TERMINAL-RING (8-GA, 1/4-IN SCREW) | ||
| 119-3662 E | TUBE-HEAT SHRINK (10.85-MM DIA)(4-CM) | |||
| 131-1490 | [1] | TERMINAL AS (6-GA TO 8-GA) | ||
| 2L-8052 | [1] | TERMINAL-RING (6-GA, 3/8-IN SCREW) | ||
| -OR- | ||||
| 2L-8060 | [1] | TERMINAL-RING (8-GA, 3/8-IN SCREW) | ||
| 119-3662 E | TUBE-HEAT SHRINK (10.85-MM DIA)(4-CM) | |||
| 131-1495 | [2] | TERMINAL AS-RING | ||
| (EACH INCLUDES) | ||||
| 2L-8066 | [1] | TERMINAL-RING (10-GA TO 12-GA, NO. 10 SCREW) | ||
| 125-7875 E | TUBE-HEAT SHRINK (7.44-MM DIA)(4-CM) | |||
| 131-1498 | [2] | TERMINAL AS | ||
| (EACH INCLUDES) | ||||
| 2L-8069 | [1] | TERMINAL-RING (2-GA TO 10-GA, 3/8-IN SCREW) | ||
| 125-7875 E | TUBE-HEAT SHRINK (7.44-MM DIA)(4-CM) | |||
| 131-1503 | [2] | TERMINAL AS-RING | ||
| (EACH INCLUDES) | ||||
| 2L-8076 | [1] | TERMINAL-RING (14-GA TO 16-GA, NO. 10 SCREW) | ||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(3-CM) | |||
| 131-1504 | [1] | TERMINAL AS | ||
| 2L-8077 | [1] | TERMINAL-RING (14-GA TO 16-GA, 1/4-IN SCREW) | ||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(3-CM) | |||
| 131-3201 | [1] | BOOT | ||
| 134-2540 | [1] | RESISTOR AS-CONNECTION (3-PIN) | ||
| 9X-3401 | [47] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1767 | [47] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 155-2255 | [1] | KIT-CONNECTING PLUG (12-PIN) | ||
| 155-2257 | [1] | KIT-CONNECTING PLUG (12-PIN) | ||
| 155-2270 | [18] | KIT-CONNECTING PLUG (2-PIN) | ||
| 155-2271 | [3] | KIT-CONNECTING PLUG (4-PIN) | ||
| 174-0503 | [1] | KIT-CONNECTING PLUG (3-PIN) | ||
| 155-2260 | [2] | KIT-CONNECTING PLUG (3-PIN) | ||
| (EACH PLUG KIT INCLUDES PLUG AS & WEDGE) | ||||
| 160-7689 | [1] | PLUG AS-CONNECTOR (70-PIN) | ||
| 159-9322 | [1] | SEAL-O-RING | ||
| 160-7690 | [1] | PLUG AS-CONNECTOR (70-PIN) | ||
| 159-9322 | [1] | SEAL-O-RING | ||
| 1P-0810 B | TAPE-ELECTRICAL | |||
| 189-3158 | [1] | SUPPRESSOR-ARC | ||
| 218-4935 | [1] | SUPPRESSOR-ARC | ||
| 230-4011 | [6] | PLUG AS-CONNECTOR (2-PIN) | ||
| 264-7029 | [1] | SEAL-CONNECTOR | ||
| 230-4013 | [3] | PLUG AS-CONNECTOR (3-PIN) | ||
| 264-7030 | [1] | SEAL-CONNECTOR | ||
| 230-5008 | [2] | PLUG AS-CONNECTOR (4-PIN) | ||
| 264-7031 | [1] | SEAL-CONNECTOR | ||
| 231-2295 | [1] | PLUG AS-CONNECTOR (8-PIN) | ||
| 264-7033 | [1] | SEAL-CONNECTOR | ||
| 238-8245 | [1] | PLUG AS-CONNECTOR (2-PIN) | ||
| 264-7029 | [1] | SEAL-CONNECTOR | ||
| 243-4505 | [3] | RECEPTACLE AS-CONNECTOR (2-PIN) | ||
| 243-4506 | [3] | RECEPTACLE AS-CONNECTOR (3-PIN) | ||
| 243-4509 | [1] | RECEPTACLE AS-CONNECTOR (8-PIN) | ||
| 243-4510 | [1] | RECEPTACLE AS-CONNECTOR (12-PIN) | ||
| 272-5000 | [1] | RECEPTACLE AS-CONNECTOR (12-PIN) | ||
| 274-3774 | [3] | CAP-CONNECTOR | ||
| 274-3780 | [1] | CAP-SEAL | ||
| 274-3784 | [1] | CAP-SEAL | ||
| 281-8801 | [1] | PLUG AS-CONNECTOR (2-PIN) | ||
| 264-7029 | [1] | SEAL-CONNECTOR | ||
| 281-8803 | [1] | PLUG AS-CONNECTOR (3-PIN) | ||
| 264-7030 | [1] | SEAL-CONNECTOR | ||
| 281-8811 | [1] | PLUG AS-CONNECTOR (6-PIN) | ||
| 264-7032 | [1] | SEAL-CONNECTOR | ||
| 4. | 370-9488 | [62] | STRAP-CABLE | |
| 5. | 372-6584 | [1] | WIRE AS | |
| 6. | 389-8432 | [2] | HARNESS AS-STEERING | |
| (EACH INCLUDES) | ||||
| 8T-8737 | [1] | PLUG-SEAL | ||
| 9X-3402 | [6] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1768 | [6] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 155-2271 | [1] | KIT-CONNECTING PLUG (4-PIN) | ||
| (INCLUDES PLUG AS AND WEDGE) | ||||
| 230-4013 | [1] | PLUG AS-CONNECTOR (3-PIN) | ||
| 264-7030 | [1] | SEAL-CONNECTOR | ||
| 7. | 4P-7581 | [1] | CLIP | |
| 8. | 2Q-0584 E | INSULATION (42-CM) | ||
| 8A. | 2Q-0584 E | INSULATION (24-CM) | ||
| 8B. | 2Q-0584 E | INSULATION (12-CM EACH) | ||
| 8C. | 2Q-0584 E | INSULATION (39-CM) | ||
| 8D. | 2Q-0584 E | INSULATION (14-CM EACH) | ||
| 8E. | 2Q-0584 E | INSULATION (20-CM) | ||
| 8F. | 2Q-0584 E | INSULATION (15-CM) | ||
| 8G. | 2Q-0584 E | INSULATION (45-CM) | ||
| 8H. | 2Q-0584 E | INSULATION (36-CM) | ||
| 8J. | 2Q-0584 E | INSULATION (123-CM) | ||
| 8K. | 2Q-0584 E | INSULATION (34-CM) | ||
| 8M. | 2Q-0584 E | INSULATION (11-CM) | ||
| 9. | 193-6911 E | INSULATION (34-CM) | ||
| 9A. | 193-6911 E | INSULATION (18-CM) | ||
| 9B. | 193-6911 E | INSULATION (15-CM EACH) | ||
| 9C. | 193-6911 E | INSULATION (9-CM) | ||
| 9D. | 193-6911 E | INSULATION (31-CM) | ||
| 9E. | 193-6911 E | INSULATION (26-CM) | ||
| 9F. | 193-6911 E | INSULATION (14-CM) | ||
| 9G. | 193-6911 E | INSULATION (13-CM EACH) | ||
| 9H. | 193-6911 E | INSULATION (11-CM EACH) | ||
| 9J. | 193-6911 E | INSULATION (12-CM) | ||
| 10. | 2Q-0604 E | INSULATION (11-CM EACH) | ||
| 10A. | 2Q-0604 E | INSULATION (18-CM) | ||
| 10B. | 2Q-0604 E | INSULATION (42-CM) | ||
| 10C. | 2Q-0604 E | INSULATION (19-CM) | ||
| 10D. | 2Q-0604 E | INSULATION (6-CM) | ||
| 10E. | 2Q-0604 E | INSULATION (5-CM) | ||
| 10F. | 2Q-0604 E | INSULATION (35-CM) | ||
| 10G. | 2Q-0604 E | INSULATION (12-CM) | ||
| 10H. | 2Q-0604 E | INSULATION (92-CM) | ||
| 10J. | 2Q-0604 E | INSULATION (48-CM) | ||
| 10K. | 2Q-0604 E | INSULATION (88-CM) | ||
| 10M. | 2Q-0604 E | INSULATION (77-CM) | ||
| 10N. | 2Q-0604 E | INSULATION (16-CM) | ||
| 10P. | 2Q-0604 E | INSULATION (117-CM) | ||
| 10R. | 2Q-0604 E | INSULATION (54-CM) | ||
| 10S. | 2Q-0604 E | INSULATION (52-CM) | ||
| 10T. | 2Q-0604 E | INSULATION (30-CM) | ||
| 10U. | 2Q-0604 E | INSULATION (71-CM) | ||
| 10V. | 2Q-0604 E | INSULATION (22-CM) | ||
| 10W. | 2Q-0604 E | INSULATION (13-CM) | ||
| 10X. | 2Q-0604 E | INSULATION (61-CM) | ||
| 10Y. | 2Q-0604 E | INSULATION (24-CM EACH) | ||
| 10Z. | 2Q-0604 E | INSULATION (79-CM) | ||
| ****STANDARD REMOVALS**** | ||||
| 4D-7794 FJ | [1] | CLIP | ||
| 7K-1181 FJ | [20] | STRAP-CABLE | ||
| B | USE AS REQUIRED | |||
| E | ORDER BY THE CENTIMETER | |||
| F | NOT SHOWN | |||
| G | ORDER BY THE INCH | |||
| J | PART OF STANDARD WIRING GP | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBC15430026
377-3560: WIRING GP-PROTECTION
377-3560 WIRING GP-PROTECTION -CONTROL VALVE
CUSTOM
PART OF 379-6437 WIRING GP-PROTECTION
CUSTOM
PART OF 379-6437 WIRING GP-PROTECTION
For full view, you need register
Parts for your 980K WHEEL LOADER:
CATERPILLAR SIS#SEBC15430027
377-3561: WIRING GP-PROTECTION
377-3561 WIRING GP-PROTECTION -SENSOR
CUSTOM
PART OF 379-6437 WIRING GP-PROTECTION
CUSTOM
PART OF 379-6437 WIRING GP-PROTECTION
For full view, you need register
Parts for your 980K WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 370-9488 | [3] | STRAP-CABLE | |
| 2. | Y | [1] | WIRING GP-PROTECTION (SENSOR) | |
| 3. | 1S-0994 | [6] | CLIP | |
| ****STANDARD REMOVALS**** | ||||
| 4D-7794 FJ | [1] | CLIP | ||
| 5P-9085 FJ | [5] | CLIP | ||
| 7K-1181 FJ | [4] | STRAP-CABLE | ||
| 353-7019 FJ | [1] | HARNESS AS-FRONT | ||
| 376-1338 FJ | [1] | HARNESS AS-SENSOR (TILT POSITION) | ||
| F | NOT SHOWN | |||
| J | PART OF STANDARD WIRING GP-SENSOR | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBC15430028
377-3562: WIRING GP-PROTECTION
377-3562 WIRING GP-PROTECTION -FRONT
CUSTOM
PART OF 378-2593 WIRING GP-PROTECTION
CUSTOM
PART OF 378-2593 WIRING GP-PROTECTION
For full view, you need register
Parts for your 980K WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 370-9488 | [25] | STRAP-CABLE | |
| 2. | 379-3366 | [1] | HARNESS AS-FRONT CHASSIS | |
| 3S-2093 | [1] | STRAP-CABLE | ||
| 8T-8737 | [11] | PLUG-SEAL | ||
| 106-4155 | [1] | KIT-RETAINING BOLT | ||
| 119-3662 E | TUBE-HEAT SHRINK (10.85-MM DIA)(7-CM) | |||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(5-CM) | |||
| 125-7875 E | TUBE-HEAT SHRINK (7.44-MM DIA)(30-CM) | |||
| 126-1766 | [9] | SOCKET-CONNECTOR (14-GA TO 18-GA) | ||
| 144-1636 | [76] | PIN-CONNECTOR (14-GA TO 18-GA) | ||
| 155-2270 | [2] | KIT-CONNECTING PLUG (2-PIN) | ||
| 155-2260 | [2] | KIT-CONNECTING PLUG (3-PIN) | ||
| 155-2270 | [1] | KIT-CONNECTING PLUG (2-PIN) | ||
| (EACH PLUG KIT INCLUDES PLUG AS & WEDGE) | ||||
| 1P-0810 | TAPE-ELECTRICAL (50-CM) | |||
| 230-4011 | [1] | PLUG AS-CONNECTOR (2-PIN) | ||
| 264-7029 | [1] | SEAL-CONNECTOR | ||
| 230-5011 | [1] | RECEPTACLE AS-CONNECTOR (6-PIN) | ||
| 243-4505 | [1] | RECEPTACLE AS-CONNECTOR (2-PIN) | ||
| 243-4506 | [1] | RECEPTACLE AS-CONNECTOR (3-PIN) | ||
| 243-4508 | [2] | RECEPTACLE AS-CONNECTOR (6-PIN) | ||
| 243-4510 | [1] | RECEPTACLE AS-CONNECTOR (12-PIN) | ||
| 272-5000 | [1] | RECEPTACLE AS-CONNECTOR (12-PIN) | ||
| 274-3780 | [1] | CAP-SEAL | ||
| 3. | 2Q-0584 E | INSULATION (14-CM) | ||
| 3A. | 2Q-0584 E | INSULATION (44-CM) | ||
| 3B. | 2Q-0584 E | INSULATION (56-CM) | ||
| 4. | 193-6911 E | INSULATION (64-CM) | ||
| 4A. | 193-6911 E | INSULATION (31-CM) | ||
| 4B. | 193-6911 | INSULATION (24-CM) | ||
| 5. | 2Q-0604 E | INSULATION (32-CM) | ||
| 5A. | 2Q-0604 E | INSULATION (20-CM) | ||
| 5B. | 2Q-0604 E | INSULATION (17-CM EACH) | ||
| 5C. | 2Q-0604 E | INSULATION (25-CM) | ||
| 5D. | 2Q-0604 E | INSULATION (36-CM) | ||
| 5E. | 2Q-0604 E | INSULATION (53-CM) | ||
| 5F. | 2Q-0604 E | INSULATION (16-CM) | ||
| 5G. | 2Q-0604 E | INSULATION (19-CM) | ||
| 5H. | 2Q-0604 E | INSULATION (21-CM) | ||
| 5J. | 2Q-0604 | INSULATION (14-CM) | ||
| 5N. | 2Q-0604 | INSULATION (34-CM) | ||
| 5P. | 2Q-0604 | INSULATION (49-CM) | ||
| 5R. | 2Q-0604 | INSULATION (144-CM) | ||
| 5S. | 2Q-0604 | INSULATION (12-CM) | ||
| E | ORDER BY THE CENTIMETER | |||
#SEBC15430029
378-2590: WIRING GP-PROTECTION
378-2590 WIRING GP-PROTECTION -CHASSIS
CUSTOM
PART OF 379-6437 WIRING GP-PROTECTION
CUSTOM
PART OF 379-6437 WIRING GP-PROTECTION
For full view, you need register
Parts for your 980K WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 370-9488 | [51] | STRAP-CABLE | |
| 2. | Y | [1] | WIRING GP-PROTECTION (CHASSIS) | |
| 3. | 1L-5081 | [1] | SPACER (0.41X0.75X0.56-IN THK) | |
| 4. | 8T-4182 M | [1] | BOLT (M10X1.5X45-MM) | |
| ****STANDARD REMOVALS**** | ||||
| 7K-1181 FJ | [64] | STRAP-CABLE | ||
| 297-8752 FJ | [1] | SWITCH GP-TOGGLE | ||
| 389-8432 FJ | [2] | HARNESS AS-STEERING | ||
| 354-6964 FJ | [1] | HARNESS AS-BRAKE | ||
| 354-6965 FJ | [1] | HARNESS AS-CHASSIS | ||
| 372-6584 FJ | [1] | WIRE AS | ||
| 8T-4137 FJM | [1] | BOLT (M10X1.5X20-MM) | ||
| F | NOT SHOWN | |||
| J | PART OF STANDARD WIRING GP-CHASSIS | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
Information:
ELECTRICAL AND STARTING SYSTEM
SWITCH GP
Operation and Maintenance Manual
Special Instruction
Field Installation Instructions for the Payload Control/Autodig Systems on Certain Wheel Loaders {1435, 1439, 5741, 7494, 7960}
Field Installation Instructions for the Payload Control/Autodig Systems on Certain Wheel Loaders {1435, 1439, 5741, 7494, 7960}
Field Installation Instructions for the Payload Control/Autodig Systems on Certain Wheel Loaders {1435, 1439, 5741, 7494, 7960}
Installing a Steel Mill Parking Brake Release Override on Certain Wheel Loaders{1408, 1901, 4267, 4282, 4808, 7301, 7610, 7620}
Installing a Steel Mill Parking Brake Release Override on Certain Wheel Loaders{1408, 1901, 4267, 4282, 4808, 7301, 7610, 7620}
Installing a Steel Mill Parking Brake Release Override on Certain Wheel Loaders{1408, 1901, 4267, 4282, 4808, 7301, 7610, 7620}
Repair/Replacement Procedure for <NOBR> 5C-6108</NOBR> Refueling Switch {1295}
Repair/Replacement Procedure for 5C-6108 Refueling Switch {1295}
Repair/Replacement Procedure for
Service Letter-NACD
PRODUCT SUPPORT PROGRAM FOR REPLACING THE MAIN POWER RELAY(S) ON CERTAIN OFF-HIGHWAY TRUCKS, WHEEL LOADERS, ARTICULATED TRUCKS, TRACK-TYPE TRACTORS, WHEEL SKIDDERS, KNUCKLEBOOM LOADERS, COMPACTORS, WHEEL DOZERS, TRUCK FELLER BUNCHER, AND MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE MAIN POWER RELAY(S) ON CERTAIN OFF-HIGHWAY TRUCKS, WHEEL LOADERS, ARTICULATED TRUCKS, TRACK-TYPE TRACTORS, WHEEL SKIDDERS, KNUCKLEBOOM LOADERS, COMPACTORS, WHEEL DOZERS, TRUCK FELLER BUNCHER, AND MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE MAIN POWER RELAY(S) ON CERTAIN OFF-HIGHWAY TRUCKS, WHEEL LOADERS, ARTICULATED TRUCKS, TRACK-TYPE TRACTORS, WHEEL SKIDDERS, KNUCKLEBOOM LOADERS, COMPACTORS, WHEEL DOZERS, TRUCK FELLER BUNCHER, AND MOTOR GRADERS
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Technical Information Bulletin
The Quick Coupler Can be Activated from the Soft Panel Switch for 387-3167 Valve and Lines Gp-Coupler Kit on Certain 980K Wheel Loaders{1408, 1435, 5057, 5133, 6129}
The Quick Coupler Can be Activated from the Soft Panel Switch for 387-3167 Valve and Lines Gp-Coupler Kit on Certain 980K Wheel Loaders{1408, 1435, 5057, 5133, 6129}
The Quick Coupler Can be Activated from the Soft Panel Switch for 387-3167 Valve and Lines Gp-Coupler Kit on Certain 980K Wheel Loaders{1408, 1435, 5057, 5133, 6129}
Specifications
Service Letter-China
PRODUCT SUPPORT PROGRAM FOR REPLACING THE MAIN POWER RELAY(S) ON CERTAIN OFF-HIGHWAY TRUCKS, WHEEL LOADERS, ARTICULATED TRUCKS, TRACK-TYPE TRACTORS, WHEEL SKIDDERS, KNUCKLEBOOM LOADERS, COMPACTORS, WHEEL DOZERS, TRUCK FELLER BUNCHER, AND MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE MAIN POWER RELAY(S) ON CERTAIN OFF-HIGHWAY TRUCKS, WHEEL LOADERS, ARTICULATED TRUCKS, TRACK-TYPE TRACTORS, WHEEL SKIDDERS, KNUCKLEBOOM LOADERS, COMPACTORS, WHEEL DOZERS, TRUCK FELLER BUNCHER, AND MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE MAIN POWER RELAY(S) ON CERTAIN OFF-HIGHWAY TRUCKS, WHEEL LOADERS, ARTICULATED TRUCKS, TRACK-TYPE TRACTORS, WHEEL SKIDDERS, KNUCKLEBOOM LOADERS, COMPACTORS, WHEEL DOZERS, TRUCK FELLER BUNCHER, AND MOTOR GRADERS
Service Letter-Asia
Systems Operation
Service Letter-APD
PRODUCT SUPPORT PROGRAM FOR REPLACING THE MAIN POWER RELAY(S) ON CERTAIN OFF-HIGHWAY TRUCKS, WHEEL LOADERS, ARTICULATED TRUCKS, TRACK-TYPE TRACTORS, WHEEL SKIDDERS, KNUCKLEBOOM LOADERS, COMPACTORS, WHEEL DOZERS, TRUCK FELLER BUNCHER, AND MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE MAIN POWER RELAY(S) ON CERTAIN OFF-HIGHWAY TRUCKS, WHEEL LOADERS, ARTICULATED TRUCKS, TRACK-TYPE TRACTORS, WHEEL SKIDDERS, KNUCKLEBOOM LOADERS, COMPACTORS, WHEEL DOZERS, TRUCK FELLER BUNCHER, AND MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE MAIN POWER RELAY(S) ON CERTAIN OFF-HIGHWAY TRUCKS, WHEEL LOADERS, ARTICULATED TRUCKS, TRACK-TYPE TRACTORS, WHEEL SKIDDERS, KNUCKLEBOOM LOADERS, COMPACTORS, WHEEL DOZERS, TRUCK FELLER BUNCHER, AND MOTOR GRADERS
Testing and Adjusting
Limit Switch (Steering Control Position) - Test and Adjust
980K Wheel Loader Electrohydraulic System
980K Wheel Loader Electrohydraulic System
Troubleshooting
Service Magazine
New Pressure Switch Is Now Used For Air Conditioner Refrigerant On Certain Cat Products {1435, 1809}
2011/06/06
2011/06/06
An Improved Fastening Procedure for the Magnetic Switch Group Is Now Available on Certain K-Series and M-Series Medium Wheel Loaders {7499}
An Improved Fastening Procedure for the Magnetic Switch Group Is Now Available on Certain K-Series and M-Series Medium Wheel Loaders {7499}
An Improved Fastening Procedure for the Magnetic Switch Group Is Now Available on Certain K-Series and M-Series Medium Wheel Loaders {7499}
An Improved Main Power Relay is Now Available for Certain Cat<SUP>®</SUP> Products {7499}
An Improved Main Power Relay is Now Available for Certain Cat® Products {7499}
An Improved Main Power Relay is Now Available for Certain Cat® Products {7499}
A Bolted Joint Best Practice procedure for the Magnetic Switch Group (Main Power Relay) is Now Available {1408, 7499}
A Bolted Joint Best Practice procedure for the Magnetic Switch Group (Main Power Relay) is Now Available {1408, 7499}
A Bolted Joint Best Practice procedure for the Magnetic Switch Group (Main Power Relay) is Now Available {1408, 7499}
