AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

CUSTOM PRODUCT SUPPORT LITERATURE FOR 328–7484 PROTECTION GROUP KLN00001-UP (MACHINE) HYDRAULIC SYSTEM Caterpillar SIS



WHEEL LOADER 924H WHEEL LOADER KLN
 CUSTOM PRODUCT SUPPORT LITERATURE FOR 328–7484 PROTECTION GROUP KLN00001-UP (MACHINE) SEBC1551 924H KLN   (2008)

Parts group 924H:

  For full view, you need register
HYDRAULIC SYSTEM
COOLER GP
COOLER GP-HYD & XMSN OIL
293-2239 COOLER GP-HYD & XMSN OIL
293-2239 COOLER GP-HYD & XMSN OIL
PART OF 328-7491 COOLER GP-HYD & XMSN OIL
328-7491 COOLER GP-HYD & XMSN OIL
328-7491 COOLER GP-HYD & XMSN OIL -CORROSION RESISTANT
CUSTOM
PART OF 328-7490 CONVERSION GP-MACHINE
COOLER GP-HYDRAULIC OIL
293-2240 COOLER GP-HYDRAULIC OIL
293-2240 COOLER GP-HYDRAULIC OIL
PART OF 293-2239 COOLER GP-HYD & XMSN OIL
CYLINDER GP
328-7484 CORROSION AR-PROTECTION
328-7484 CORROSION AR-PROTECTION
CUSTOM
CANNOT BE USED WITH CANOPY
CYLINDER GP-HYDRAULIC
163-0324 CYLINDER GP-HYDRAULIC
163-0324 CYLINDER GP-HYDRAULIC
88.9 MM (3.5 IN) BORE X 549.0 MM (21.6 IN) STROKE
PART OF 169-6220 FORK GP-LOG & LUMBER
AN ATTACHMENT
LINES GP-CYLINDER
LINES GP-PROTECTION
331-4908 LINES GP-PROTECTION
331-4908 LINES GP-PROTECTION -CORROSION RESISTANT
CUSTOM
PART OF 328-7484 CORROSION AR-PROTECTION
LINES GP-HYDRAULIC
LINES GP-PROTECTION
331-4908 LINES GP-PROTECTION
331-4908 LINES GP-PROTECTION -CORROSION RESISTANT
CUSTOM
PART OF 328-7484 CORROSION AR-PROTECTION

Information:

(For parts list, see above)

Operation and Maintenance Manual
Ride Control Accumulator - Check
924H, 924HZ, 928HZ and 930H Wheel Loaders
Special Instruction
Accumulator Discharging and Charging Procedures {0738, 4263, 4264, 4331, 5077, 5077, 5081, 7474}
Accumulator Discharging and Charging Procedures {0738, 4263, 4264, 4331, 5077, 5077, 5081, 7474}
Decommissioning Procedure for Permanently Sealed Diaphragm Accumulators {5077}
Decommissioning Procedure for Permanently Sealed Diaphragm Accumulators {5077}
Technical Information Bulletin
Updated Ride Control Accumulator Test and Charge Instructions{0738, 5004, 5077, 5081, 7474}
Updated Ride Control Accumulator Test and Charge Instructions{0738, 5004, 5077, 5081, 7474}
Specifications
Pilot Oil Accumulator
924H, 924HZ, 928HZ and 930H Wheel Loaders Hydraulic System
Ride Control Accumulator
924H, 924HZ, 928HZ and 930H Wheel Loaders Hydraulic System
Ride Control Accumulator
924H, 924HZ, 928HZ and 930H Wheel Loaders Hydraulic System
Tool Operating Manual
NEHS1214: 455-0126 Nitrogen Booster Pump Group {0374, 0599, 0647, 0756, 4263, 4331, 5077, 7200}
NEHS1214: 455-0126 Nitrogen Booster Pump Group {0374, 0599, 0647, 0756, 4263, 4331, 5077, 7200}
Testing and Adjusting
Ride Control Accumulator - Test and Charge
924H and 924Hz Wheel Loaders Hydraulic System
Pilot Oil Accumulator - Test and Charge
924H and 924Hz Wheel Loaders Hydraulic System
Disassembly and Assembly
Ride Control Accumulator - Remove and Install
924H, 924Hz, 928Hz and 930H Wheel Loaders Machine Systems
Pilot Oil Accumulator - Remove and Install
924H, 924Hz, 928Hz and 930H Wheel Loaders Machine Systems
Service Magazine
New Torque Value for Ride Control Accumulators on Certain 924H, 924HZ, and 930H Wheel Loaders {5004, 5077}
2010/02/25
Improved Ride Accumulators are Now Used on Certain 924H, 924HZ, and 930H Wheel Loaders {5004, 5077}
2012/01/03
The Accumulator Discharging and Charging Procedures are Updated {5077}
The Accumulator Discharging and Charging Procedures are Updated {5077}
Troubleshooting
MID 081 - CID 0491 - FMI 03
924H, 924HZ, 928HZ and 930H Wheel Loaders
MID 081 - CID 0491 - FMI 05
924H, 924HZ, 928HZ and 930H Wheel Loaders
MID 081 - CID 0491 - FMI 06
924H, 924HZ, 928HZ and 930H Wheel Loaders
MID 081 - CID 0491 - FMI 13
924H, 924HZ, 928HZ and 930H Wheel Loaders
MID 081 - CID 0492 - FMI 03
924H, 924HZ, 928HZ and 930H Wheel Loaders
MID 081 - CID 0492 - FMI 05
924H, 924HZ, 928HZ and 930H Wheel Loaders
MID 081 - CID 0492 - FMI 06
924H, 924HZ, 928HZ and 930H Wheel Loaders
MID 081 - CID 0492 - FMI 13
924H, 924HZ, 928HZ and 930H Wheel Loaders
Operation and Maintenance Manual
Ride Control Accumulator - Check
924H, 924HZ, 928HZ and 930H Wheel Loaders
Technical Information Bulletin
Updated Ride Control Accumulator Test and Charge Instructions{0738, 5004, 5077, 5081, 7474}
Updated Ride Control Accumulator Test and Charge Instructions{0738, 5004, 5077, 5081, 7474}
Systems Operation
Ride Control System
924H and 924Hz Wheel Loaders Hydraulic System
Service Magazine
New Torque Value for Ride Control Accumulators on Certain 924H, 924HZ, and 930H Wheel Loaders {5004, 5077}
2010/02/25
Specifications
Check Valve (Hydraulic Oil Cooler Bypass)
924H, 924HZ, 928HZ and 930H Wheel Loaders Hydraulic System
Systems Operation
Hydraulic Oil Cooler
924H and 924Hz Wheel Loaders Hydraulic System
Hydraulic Oil Cooler
924H, 924HZ, 928HZ and 930H Wheel Loaders Braking and Hydraulic Fan System
Disassembly and Assembly
Hydraulic and Power Train Oil Cooler - Remove
924H, 924HZ, 928HZ and 930H Wheel Loaders Engine Supplement
Hydraulic and Power Train Oil Cooler - Install
924H, 924HZ, 928HZ and 930H Wheel Loaders Engine Supplement
Cooling System Package (Radiator, Fan, Aftercooler, Oil Cooler) - Remove
924H, 924HZ, 928HZ and 930H Wheel Loaders Engine Supplement
Cooling System Package (Radiator, Fan, Aftercooler, Oil Cooler) - Install
924H, 924HZ, 928HZ and 930H Wheel Loaders Engine Supplement
Operation and Maintenance Manual
Bucket Linkage and Loader Cylinder Bearings - Lubricate
924H, 924HZ, 928HZ and 930H Wheel Loaders
Special Instruction
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Technical Information Bulletin
Surface Finishes of Cylinder Bores{7562}
Surface Finishes of Cylinder Bores{7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Specifications
Lift Cylinder
924H, 924HZ, 928HZ and 930H Wheel Loaders Hydraulic System
Coupler Cylinder
924H, 924HZ, 928HZ and 930H Wheel Loaders Hydraulic System
Tilt Cylinder
924H, 924HZ, 928HZ and 930H Wheel Loaders Hydraulic System
Tool Operating Manual
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Reuse And Salvage Guidelines
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
Contamination Control Guidelines
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Applied Failure Analysis
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Bench Test Procedures
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Troubleshooting
Operational Checks (Hydraulic System)
924H, 924HZ, 928HZ and 930H Wheel Loaders
Disassembly and Assembly
Lift Cylinder - Remove and Install
924H, 924Hz, 928Hz and 930H Wheel Loaders Machine Systems
Pin Coupler Cylinder - Remove and Install
924H, 924Hz, 928Hz and 930H Wheel Loaders Machine Systems
Tilt Cylinder - Remove and Install
924H, 924Hz, 928Hz and 930H Wheel Loaders Machine Systems
Service Magazine
Procedure Now Available to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
2013/02/28
Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
A Rework Procedure Improves the Seal Assembly Performance in Hydraulic Cylinders on Cat Products {7562}
2010/04/30
Operation and Maintenance Manual
Oil Filter - Inspect
924H, 924HZ, 928HZ and 930H Wheel Loaders
Special Instruction
Guidelines for the Use of High Efficiency Filters for the Hydraulic Oil System and for the Power Train Oil System {3000, 3004, 5050, 5068}
Guidelines for the Use of High Efficiency Filters for the Hydraulic Oil System and for the Power Train Oil System {3000, 3004, 5050, 5068}
Specifications
Oil Filter (Hydraulic)
924H, 924HZ, 928HZ and 930H Wheel Loaders Hydraulic System
Tool Operating Manual
Procedures for Using 9U-5971 and 173-9842 Filter Cart Group {0599, 0738, 5050, 5056, 5057, 5068, 5095, 7579}
Procedures for Using 9U-5971 and 173-9842 Filter Cart Group {0599, 0738, 5050, 5056, 5057, 5068, 5095, 7579}
188-3242 Filter Cart Group and 227-2479 Filter Cart Group{0374, 0599, 0680, 0738, 0768, 5050, 5056, 5095}
188-3242 Filter Cart Group and 227-2479 Filter Cart Group{0374, 0599, 0680, 0738, 0768, 5050, 5056, 5095}
Systems Operation
Oil Filter (Hydraulic)
924H and 924Hz Wheel Loaders Hydraulic System
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Filtration Procedure for Wheel Loader, Wheel Dozer, Soil Compactor, Landfill Compactor Hydraulic Oil {0680, 0768, 5056, 5068}
Filtration Procedure for Wheel Loader, Wheel Dozer, Soil Compactor, Landfill Compactor Hydraulic Oil {0680, 0768, 5056, 5068}
Service Magazine
New Oil Filters for all Cat Machines are Available {3004, 3067, 4295, 431F, 5068}
New Oil Filters for all Cat Machines are Available {3004, 3067, 4295, 431F, 5068}
Improved Hydraulic Oil Filter Bypass Indicator Is Now Available for Certain Cat Machines {5068}
Improved Hydraulic Oil Filter Bypass Indicator Is Now Available for Certain Cat Machines {5068}
Operation and Maintenance Manual
Lift Kickout
924H, 924HZ, 928HZ and 930H Wheel Loaders
Work Tool Positioner
924H, 924HZ, 928HZ and 930H Wheel Loaders
Special Instruction
Kickout Positioner Adjustment for Fusion and Standard Coupler Small Wheel Loaders{5109, 5112}
Kickout Positioner Adjustment for Fusion and Standard Coupler Small Wheel Loaders{5109, 5112}
Disassembly and Assembly
Lift Kickout Control - Remove and Install
924H, 924Hz, 928Hz and 930H Wheel Loaders Machine Systems
Work Tool Positioner Control - Remove and Install
924H, 924Hz, 928Hz and 930H Wheel Loaders Machine Systems
Technical Information Bulletin
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Special Instruction
New Hose Couplings Are Now Used{0684, 5057, 5057, 7554}
New Hose Couplings Are Now Used{0684, 5057, 5057, 7554}
O-Rings - Radial, Fitting Assembly O-Rings and Other O-Ring Applications {0599, 0738, 4000, 4250, 4300, 5050, 5057, 7555}
O-Rings - Radial, Fitting Assembly O-Rings and Other O-Ring Applications {0599, 0738, 4000, 4250, 4300, 5050, 5057, 7555}
Technical Information Bulletin
The Flange Head on <NOBR>442-5593</NOBR> Coupling As May Have Been Manufactured Incorrectly {5057}
The Flange Head on 442-5593 Coupling As May Have Been Manufactured Incorrectly {5057}
Tool Operating Manual
358-4528 (380/480 V, 50/60 Hz, 3 Phase), 457-6040 (230V, 60 Hz, Single Phase) , 457-6039 (230V, 50 Hz, Single Phase) Hose Machine Group Set-Up and Operation{0599, 0684}
358-4528 (380/480 V, 50/60 Hz, 3 Phase), 457-6040 (230V, 60 Hz, Single Phase) , 457-6039 (230V, 50 Hz, Single Phase) Hose Machine Group Set-Up and Operation{0599, 0684}
Crimputer III Setup and Operation{0684, 5057}
Crimputer III Setup and Operation{0684, 5057}
Crimping Caterpillar 1E294, 1E716, 1E844 Hose and Couplings {0374, 0599, 0684, 0738, 5057}
Crimping Caterpillar 1E294, 1E716, 1E844 Hose and Couplings {0374, 0599, 0684, 0738, 5057}
Using the 209-3153 Portable Hose Machine {0374, 0599, 0684, 0738, 5057}
Using the 209-3153 Portable Hose Machine {0374, 0599, 0684, 0738, 5057}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
Converting 137-7238 Hose Assembly Machines and 134-5640 Hose Assembly Machines (100 Ton) from Sony Control to Crimputer Control{0374, 0599, 0684, 5057}
Converting 137-7238 Hose Assembly Machines and 134-5640 Hose Assembly Machines (100 Ton) from Sony Control to Crimputer Control{0374, 0599, 0684, 5057}
Set up and Basic Operation of the 145-5161 Floor Model Hose Machine {0374, 0599, 0684, 0738, 5057}
Set up and Basic Operation of the 145-5161 Floor Model Hose Machine {0374, 0599, 0684, 0738, 5057}
Using the 9U-5792, 4C-5052, 4C-5054, 4C-3670, and 4C-3680 Hydraulic Hose Machines{0374, 0599, 0684, 0738, 5057}
Using the 9U-5792, 4C-5052, 4C-5054, 4C-3670, and 4C-3680 Hydraulic Hose Machines{0374, 0599, 0684, 0738, 5057}
243-0765 Bench Model Hose Machine For Use With the 242-3567 Variable Crimp Die Bowl{0374, 0599, 0684, 0738, 5057}
243-0765 Bench Model Hose Machine For Use With the 242-3567 Variable Crimp Die Bowl{0374, 0599, 0684, 0738, 5057}
Crimping Permanent Couplings Using the 136-3642 Crimp Tool Group in Combination and XT Hose Machines{0374, 0599, 0684, 5057}
Crimping Permanent Couplings Using the 136-3642 Crimp Tool Group in Combination and XT Hose Machines{0374, 0599, 0684, 5057}
Reuse And Salvage Guidelines
Crimputer III Setup and Operation{0684, 5057}
Crimputer III Setup and Operation{0684, 5057}
Contamination Control Guidelines
Hose Products Reference Guide {0374, 0599, 0684, 0738, 5057}
Hose Products Reference Guide {0374, 0599, 0684, 0738, 5057}
Special Instruction
Installation of the 315-6343, 315-6344 Coupler Lines Gp for 924H and 924G and Installation of the 315-6341, 315-6342 Coupler Lines Gp for 930H and 930G{5057, 5147, 5734, 6129, 7332}
Installation of the 315-6343, 315-6344 Coupler Lines Gp for 924H and 924G and Installation of the 315-6341, 315-6342 Coupler Lines Gp for 930H and 930G{5057, 5147, 5734, 6129, 7332}
New Hose Couplings Are Now Used{0684, 5057, 5057, 7554}
New Hose Couplings Are Now Used{0684, 5057, 5057, 7554}
O-Rings - Radial, Fitting Assembly O-Rings and Other O-Ring Applications {0599, 0738, 4000, 4250, 4300, 5050, 5057, 7555}
O-Rings - Radial, Fitting Assembly O-Rings and Other O-Ring Applications {0599, 0738, 4000, 4250, 4300, 5050, 5057, 7555}
Technical Information Bulletin
Some Hydraulic Couplings are Identified with an Incorrect Part Number{5057}
Some Hydraulic Couplings are Identified with an Incorrect Part Number{5057}
The Flange Head on <NOBR>442-5593</NOBR> Coupling As May Have Been Manufactured Incorrectly {5057}
The Flange Head on 442-5593 Coupling As May Have Been Manufactured Incorrectly {5057}
Specifications
Check Valve (Hydraulic Oil Cooler Bypass)
924H, 924HZ, 928HZ and 930H Wheel Loaders Hydraulic System
Tool Operating Manual
358-4528 (380/480 V, 50/60 Hz, 3 Phase), 457-6040 (230V, 60 Hz, Single Phase) , 457-6039 (230V, 50 Hz, Single Phase) Hose Machine Group Set-Up and Operation{0599, 0684}
358-4528 (380/480 V, 50/60 Hz, 3 Phase), 457-6040 (230V, 60 Hz, Single Phase) , 457-6039 (230V, 50 Hz, Single Phase) Hose Machine Group Set-Up and Operation{0599, 0684}
Crimputer III Setup and Operation{0684, 5057}
Crimputer III Setup and Operation{0684, 5057}
242-3567 Variable Crimp Die Bowl{0684}
242-3567 Variable Crimp Die Bowl{0684}
Crimping Caterpillar 1E294, 1E716, 1E844 Hose and Couplings {0374, 0599, 0684, 0738, 5057}
Crimping Caterpillar 1E294, 1E716, 1E844 Hose and Couplings {0374, 0599, 0684, 0738, 5057}
Using the 209-3153 Portable Hose Machine {0374, 0599, 0684, 0738, 5057}
Using the 209-3153 Portable Hose Machine {0374, 0599, 0684, 0738, 5057}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
Converting 137-7238 Hose Assembly Machines and 134-5640 Hose Assembly Machines (100 Ton) from Sony Control to Crimputer Control{0374, 0599, 0684, 5057}
Converting 137-7238 Hose Assembly Machines and 134-5640 Hose Assembly Machines (100 Ton) from Sony Control to Crimputer Control{0374, 0599, 0684, 5057}
Set up and Basic Operation of the 145-5161 Floor Model Hose Machine {0374, 0599, 0684, 0738, 5057}
Set up and Basic Operation of the 145-5161 Floor Model Hose Machine {0374, 0599, 0684, 0738, 5057}
Using the 9U-5792, 4C-5052, 4C-5054, 4C-3670, and 4C-3680 Hydraulic Hose Machines{0374, 0599, 0684, 0738, 5057}
Using the 9U-5792, 4C-5052, 4C-5054, 4C-3670, and 4C-3680 Hydraulic Hose Machines{0374, 0599, 0684, 0738, 5057}
Reuse And Salvage Guidelines
Crimputer III Setup and Operation{0684, 5057}
Crimputer III Setup and Operation{0684, 5057}
Contamination Control Guidelines
Hose Products Reference Guide {0374, 0599, 0684, 0738, 5057}
Hose Products Reference Guide {0374, 0599, 0684, 0738, 5057}
Service Magazine
Hydraulic Hose Suppression Sleeves for Certain Machines are Now Available {5057}
Hydraulic Hose Suppression Sleeves for Certain Machines are Now Available {5057}
Technical Information Bulletin
The Flange Head on <NOBR>442-5593</NOBR> Coupling As May Have Been Manufactured Incorrectly {5057}
The Flange Head on 442-5593 Coupling As May Have Been Manufactured Incorrectly {5057}
Specifications
Pilot Oil Accumulator
924H, 924HZ, 928HZ and 930H Wheel Loaders Hydraulic System
Testing and Adjusting
Pilot Oil Accumulator - Test and Charge
924H and 924Hz Wheel Loaders Hydraulic System
Technical Information Bulletin
The Flange Head on <NOBR>442-5593</NOBR> Coupling As May Have Been Manufactured Incorrectly {5057}
The Flange Head on 442-5593 Coupling As May Have Been Manufactured Incorrectly {5057}
Operation and Maintenance Manual
Ride Control Accumulator - Check
924H, 924HZ, 928HZ and 930H Wheel Loaders
Systems Operation
Ride Control System
924H and 924Hz Wheel Loaders Hydraulic System
Service Magazine
An Improved Pressure Switch for the Ride Control is Available for Certain Integrated Toolcarriers and Wheel Loaders {5004, 5057}
2010/02/04
Special Instruction
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Specifications
Gear Motor (Reversing Fan)
924H, 924HZ, 928HZ and 930H Wheel Loaders Braking and Hydraulic Fan System
Solenoid Valve (Hydraulic Fan)
924H, 924HZ, 928HZ and 930H Wheel Loaders Braking and Hydraulic Fan System
Gear Motor (Hydraulic Fan)
924H, 924HZ, 928HZ and 930H Wheel Loaders Braking and Hydraulic Fan System
Tool Operating Manual
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
Systems Operation
Gear Motor (Hydraulic Fan)
924H, 924HZ, 928HZ and 930H Wheel Loaders Braking and Hydraulic Fan System
Reuse And Salvage Guidelines
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 9, 10, and 11) {5061, 506G, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 9, 10, and 11) {5061, 506G, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070}
General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070}
Testing and Adjusting
Hydraulic Fan Speed - Calibrate
924H, 924HZ, 928HZ and 930H Wheel Loaders Braking and Hydraulic Fan System
Bench Test Procedures
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Troubleshooting
MID 081 - CID 0486 - FMI 04
924H, 924HZ, 928HZ and 930H Wheel Loaders
Cooling Fan Control - Test
C6.6 Engines For Caterpillar Built Machines
Disassembly and Assembly
Fan and Gear Motor (Hydraulic Fan) - Remove
924H, 924HZ, 928HZ and 930H Wheel Loaders Engine Supplement
Fan and Gear Motor (Hydraulic Fan) - Install
924H, 924HZ, 928HZ and 930H Wheel Loaders Engine Supplement
Gear Motor (Hydraulic Fan) - Disassemble
924H, 924HZ, 928HZ and 930H Wheel Loaders Engine Supplement
Gear Motor (Hydraulic Fan) - Assemble
924H, 924HZ, 928HZ and 930H Wheel Loaders Engine Supplement
Special Instruction
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Repair Process for Hydraulic Gear Pumps {5073}
Repair Process for Hydraulic Gear Pumps {5073}
Vane Type Hydraulic Pump Identification Guidelines {5055}
Vane Type Hydraulic Pump Identification Guidelines {5055}
Specifications
Piston Pump (Implement)
924H, 924HZ, 928HZ and 930H Wheel Loaders Hydraulic System
Piston Pump (Steering, Pilot)
924H, 924HZ, 928HZ and 930H Wheel Loaders Hydraulic System
Gear Pump (Brake, Hydraulic Fan)
924H, 924HZ, 928HZ and 930H Wheel Loaders Braking and Hydraulic Fan System
Brake and Hydraulic Fan Pump and Mounting
924H, 924HZ, 928HZ and 930H Wheel Loaders Braking and Hydraulic Fan System
Tool Operating Manual
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
Systems Operation
Gear Pump (Brake, Hydraulic Fan)
924H, 924HZ, 928HZ and 930H Wheel Loaders Braking and Hydraulic Fan System
Implement Pump
924H and 924Hz Wheel Loaders Hydraulic System
Reuse And Salvage Guidelines
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Vane Type Hydraulic Pumps {5055}
Vane Type Hydraulic Pumps {5055}
Repair Process for Hydraulic Gear Pumps {5073}
Repair Process for Hydraulic Gear Pumps {5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 9, 10, and 11) {5061, 506G, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 9, 10, and 11) {5061, 506G, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Removing and Installing Bushings and Pressure Plates in Hydraulic Gear Pumps {5073}
Removing and Installing Bushings and Pressure Plates in Hydraulic Gear Pumps {5073}
Hydraulic Piston Pumps Used in Certain Models of Caterpillar Equipment{3203, 5070, 5084}
Hydraulic Piston Pumps Used in Certain Models of Caterpillar Equipment{3203, 5070, 5084}
Vane Type Hydraulic Pump Identification Guidelines {5055}
Vane Type Hydraulic Pump Identification Guidelines {5055}
General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070}
General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070}
Thermal Spray Procedures for Tyrone Drive Shaft (Pump Gear){0679, 3066, 5073}
Thermal Spray Procedures for Tyrone Drive Shaft (Pump Gear){0679, 3066, 5073}
Testing and Adjusting
Piston Pump Pressure - Test and Adjust
924H and 924Hz Wheel Loaders Hydraulic System
Pump Performance (Implement) - Test
924H and 924Hz Wheel Loaders Hydraulic System
Bench Test Procedures
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Bench Test Procedure for Gear Pumps {5073}
Bench Test Procedure for Gear Pumps {5073}
Bench Test Procedure for Vane Pumps {5055}
Bench Test Procedure for Vane Pumps {5055}
Bench Test Procedure for Hydraulic Piston Pumps {5070}
Bench Test Procedure for Hydraulic Piston Pumps {5070}
Bench Test Procedure for Hydraulic Piston Pumps {5070}
Bench Test Procedure for Hydraulic Piston Pumps {5070}
Disassembly and Assembly
Piston Pump (Implement, Steering, Pilot) - Disassemble
924H, 924Hz, 928Hz and 930H Wheel Loaders Machine Systems
Piston Pump (Implement, Steering, Pilot) - Assemble
924H, 924Hz, 928Hz and 930H Wheel Loaders Machine Systems
Piston Pump (Implement, Steering, Pilot) - Remove
924H, 924Hz, 928Hz and 930H Wheel Loaders Machine Systems
Piston Pump (Implement) (Front) - Disassemble
924H, 924Hz, 928Hz and 930H Wheel Loaders Machine Systems
Piston Pump (Implement) (Front) - Assemble
924H, 924Hz, 928Hz and 930H Wheel Loaders Machine Systems
Piston Pump (Steering, Pilot) (Rear) - Disassemble
924H, 924Hz, 928Hz and 930H Wheel Loaders Machine Systems
Piston Pump (Implement, Steering, Pilot) - Install
924H, 924Hz, 928Hz and 930H Wheel Loaders Machine Systems
Gear Pump (Brake, Hydraulic Fan) - Remove
924H, 924Hz, 928Hz and 930H Wheel Loaders Machine Systems
Gear Pump (Brake, Hydraulic Fan) - Install
924H, 924Hz, 928Hz and 930H Wheel Loaders Machine Systems
Gear Pump (Brake, Hydraulic Fan) - Disassemble
924H, 924Hz, 928Hz and 930H Wheel Loaders Machine Systems
Gear Pump (Brake, Hydraulic Fan) - Assemble
924H, 924Hz, 928Hz and 930H Wheel Loaders Machine Systems
Piston Pump (Steering, Pilot) (Rear) - Assemble
924H, 924Hz, 928Hz and 930H Wheel Loaders Machine Systems
Service Magazine
New Metering Pump Groups For Steering Control Prevent Oil Leaks {4300, 4301, 4312}
2010/08/19
Reuse And Salvage Guidelines
Universal Joints and Drive Shafts {3108, 3251, 3253}
Universal Joints and Drive Shafts {3108, 3251, 3253}
Final Drive Steering System, Wheel Braking System, and Wheels & Tires Salvage and Reuse Manual Contents {4000, 4050, 4100, 4250, 4300}
Final Drive Steering System, Wheel Braking System, and Wheels & Tires Salvage and Reuse Manual Contents {4000, 4050, 4100, 4250, 4300}
Operation and Maintenance Manual
Oil Filter - Inspect
924H, 924HZ, 928HZ and 930H Wheel Loaders
Hydraulic System Oil - Change
924H, 924HZ, 928HZ and 930H Wheel Loaders
Hydraulic System Oil Filter - Replace
924H, 924HZ, 928HZ and 930H Wheel Loaders
Hydraulic System Oil Level - Check
924H, 924HZ, 928HZ and 930H Wheel Loaders
Hydraulic System Oil Sample - Obtain
924H, 924HZ, 928HZ and 930H Wheel Loaders
Hydraulic Tank Breather - Replace
924H, 924HZ, 928HZ and 930H Wheel Loaders
Specifications
Hydraulic Tank
924H, 924HZ, 928HZ and 930H Wheel Loaders Hydraulic System
Tool Operating Manual
204-7392 (Air Motor Driven) Filter Cart {0645, 0680, 0738, 5056, 5068}
204-7392 (Air Motor Driven) Filter Cart {0645, 0680, 0738, 5056, 5068}
Procedures for Using 9U-5971 and 173-9842 Filter Cart Group {0599, 0738, 5050, 5056, 5057, 5068, 5095, 7579}
Procedures for Using 9U-5971 and 173-9842 Filter Cart Group {0599, 0738, 5050, 5056, 5057, 5068, 5095, 7579}
Procedures For Using: 127-8781 Transfer Filter Cart , old 9U-7361 (110V, 60 hz), 169-7159 Transfer Filter Cart , old 127-8782 (220V, 50 hz) CE, 174-9158 Transfer Filter Cart , old 129-0849 (Air Motor Driven){0374, 0599, 0680, 0738}
Procedures For Using: 127-8781 Transfer Filter Cart , old 9U-7361 (110V, 60 hz), 169-7159 Transfer Filter Cart , old 127-8782 (220V, 50 hz) CE, 174-9158 Transfer Filter Cart , old 129-0849 (Air Motor Driven){0374, 0599, 0680, 0738}
Procedure for Using 173-8839 Fluid Storage Filter Cart {0113, 0374, 0599, 0680, 0738, 7579}
Procedure for Using 173-8839 Fluid Storage Filter Cart {0113, 0374, 0599, 0680, 0738, 7579}
188-3242 Filter Cart Group and 227-2479 Filter Cart Group{0374, 0599, 0680, 0738, 0768, 5050, 5056, 5095}
188-3242 Filter Cart Group and 227-2479 Filter Cart Group{0374, 0599, 0680, 0738, 0768, 5050, 5056, 5095}
Reuse And Salvage Guidelines
Filtration Times for Caterpillar Machine Fluid Compartments{0680, 0738, 0768, 3080, 5050, 5056, 5095}
Filtration Times for Caterpillar Machine Fluid Compartments{0680, 0738, 0768, 3080, 5050, 5056, 5095}
Contamination Control Guidelines
Procedure for Filtering <NOBR> 9U-5000</NOBR> Hydraulic Test Bench Hydraulic Oil {0680, 0738, 0768, 0784, 5050, 5056}
Procedure for Filtering 9U-5000 Hydraulic Test Bench Hydraulic Oil {0680, 0738, 0768, 0784, 5050, 5056}
Filtration Procedure for Excavator Hydraulic Oil {0680, 0768, 5050, 5056}
Filtration Procedure for Excavator Hydraulic Oil {0680, 0768, 5050, 5056}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Filtration Procedure for Wheel Loader, Wheel Dozer, Soil Compactor, Landfill Compactor Hydraulic Oil {0680, 0768, 5056, 5068}
Filtration Procedure for Wheel Loader, Wheel Dozer, Soil Compactor, Landfill Compactor Hydraulic Oil {0680, 0768, 5056, 5068}
Filtration Times for Caterpillar Machine Fluid Compartments{0680, 0738, 0768, 3080, 5050, 5056, 5095}
Filtration Times for Caterpillar Machine Fluid Compartments{0680, 0738, 0768, 3080, 5050, 5056, 5095}
Basic Principles of Kidney Loop Filtering Hydraulic Fluid Systems {0680, 0768, 5050, 5056}
Basic Principles of Kidney Loop Filtering Hydraulic Fluid Systems {0680, 0768, 5050, 5056}
Disassembly and Assembly
Hydraulic Tank - Remove and Install
924H, 924Hz, 928Hz and 930H Wheel Loaders Machine Systems
Service Magazine
A New Strainer Assembly For the Hydraulic Tank Is Now Available {5056, 5068}
2013/09/02
Truck Engine News
Changes to the Usage and Cleaning of the Contamination Monitor Group {0784, 5050}
2010/10/01
Engine News
Changes to the Usage and Cleaning of the Contamination Monitor Group {0784, 5050}
2010/09/10
Special Instruction
Operating Instructions for Cat 1U-9400 Series Hydraulic Test Center {0784}
Operating Instructions for Cat 1U-9400 Series Hydraulic Test Center {0784}
Accumulator Discharging and Charging Procedures {0738, 4263, 4264, 4331, 5077, 5077, 5081, 7474}
Accumulator Discharging and Charging Procedures {0738, 4263, 4264, 4331, 5077, 5077, 5081, 7474}
Lip Type Seals {0599, 0733, 5050, 7555}
Lip Type Seals {0599, 0733, 5050, 7555}
Hose Inspection Form {0374, 0599, 5057, 5057}
Hose Inspection Form {0374, 0599, 5057, 5057}
Technical Information Bulletin
Updated Ride Control Accumulator Test and Charge Instructions{0738, 5004, 5077, 5081, 7474}
Updated Ride Control Accumulator Test and Charge Instructions{0738, 5004, 5077, 5081, 7474}
Tool Operating Manual
358-4528 (380/480 V, 50/60 Hz, 3 Phase), 457-6040 (230V, 60 Hz, Single Phase) , 457-6039 (230V, 50 Hz, Single Phase) Hose Machine Group Set-Up and Operation{0599, 0684}
358-4528 (380/480 V, 50/60 Hz, 3 Phase), 457-6040 (230V, 60 Hz, Single Phase) , 457-6039 (230V, 50 Hz, Single Phase) Hose Machine Group Set-Up and Operation{0599, 0684}
Crimputer III Setup and Operation{0684, 5057}
Crimputer III Setup and Operation{0684, 5057}
242-3567 Variable Crimp Die Bowl{0684}
242-3567 Variable Crimp Die Bowl{0684}
Using the 198-4240 Digital Pressure Indicator Group{0599, 0738, 0788, 1000, 3000, 4000, 5000, 6000}
Using the 198-4240 Digital Pressure Indicator Group{0599, 0738, 0788, 1000, 3000, 4000, 5000, 6000}
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
Crimping Caterpillar 1E294, 1E716, 1E844 Hose and Couplings {0374, 0599, 0684, 0738, 5057}
Crimping Caterpillar 1E294, 1E716, 1E844 Hose and Couplings {0374, 0599, 0684, 0738, 5057}
Using the 209-3153 Portable Hose Machine {0374, 0599, 0684, 0738, 5057}
Using the 209-3153 Portable Hose Machine {0374, 0599, 0684, 0738, 5057}
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
Base-Mounted Recirculating Parts Washers{0374, 0599, 0680, 0699, 0700}
Base-Mounted Recirculating Parts Washers{0374, 0599, 0680, 0699, 0700}
204-7392 (Air Motor Driven) Filter Cart {0645, 0680, 0738, 5056, 5068}
204-7392 (Air Motor Driven) Filter Cart {0645, 0680, 0738, 5056, 5068}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
9U-5000 Series Hydraulic Test Bench {0599, 0738}
9U-5000 Series Hydraulic Test Bench {0599, 0738}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9437 Portable Hydraulic Tester , 1U-8761 Portable Hydraulic Tester (Canceled), 4C-9675 Portable Hydraulic Tester , 1U-9951 Portable Hydraulic Tester (Canceled){0599, 0738}
4C-9437 Portable Hydraulic Tester , 1U-8761 Portable Hydraulic Tester (Canceled), 4C-9675 Portable Hydraulic Tester , 1U-9951 Portable Hydraulic Tester (Canceled){0599, 0738}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Procedures for Using 9U-5971 and 173-9842 Filter Cart Group {0599, 0738, 5050, 5056, 5057, 5068, 5095, 7579}
Procedures for Using 9U-5971 and 173-9842 Filter Cart Group {0599, 0738, 5050, 5056, 5057, 5068, 5095, 7579}
Procedures For Using: 127-8781 Transfer Filter Cart , old 9U-7361 (110V, 60 hz), 169-7159 Transfer Filter Cart , old 127-8782 (220V, 50 hz) CE, 174-9158 Transfer Filter Cart , old 129-0849 (Air Motor Driven){0374, 0599, 0680, 0738}
Procedures For Using: 127-8781 Transfer Filter Cart , old 9U-7361 (110V, 60 hz), 169-7159 Transfer Filter Cart , old 127-8782 (220V, 50 hz) CE, 174-9158 Transfer Filter Cart , old 129-0849 (Air Motor Driven){0374, 0599, 0680, 0738}
Procedure for Using 173-8839 Fluid Storage Filter Cart {0113, 0374, 0599, 0680, 0738, 7579}
Procedure for Using 173-8839 Fluid Storage Filter Cart {0113, 0374, 0599, 0680, 0738, 7579}
Converting 137-7238 Hose Assembly Machines and 134-5640 Hose Assembly Machines (100 Ton) from Sony Control to Crimputer Control{0374, 0599, 0684, 5057}
Converting 137-7238 Hose Assembly Machines and 134-5640 Hose Assembly Machines (100 Ton) from Sony Control to Crimputer Control{0374, 0599, 0684, 5057}
146-1738 Precision Borescope (Hawkeye){0599, 0614, 0644, 0701, 0706, 0708, 0727, 0738}
146-1738 Precision Borescope (Hawkeye){0599, 0614, 0644, 0701, 0706, 0708, 0727, 0738}
TT5000 to TT7000 Torque Turn Wrench Conversion{0374, 0599, 0602, 0677, 79NY}
TT5000 to TT7000 Torque Turn Wrench Conversion{0374, 0599, 0602, 0677, 79NY}
Set up and Basic Operation of the 145-5161 Floor Model Hose Machine {0374, 0599, 0684, 0738, 5057}
Set up and Basic Operation of the 145-5161 Floor Model Hose Machine {0374, 0599, 0684, 0738, 5057}
Using the 164-2691 Printer Group {0374, 0599, 0684, 5057}
Using the 164-2691 Printer Group {0374, 0599, 0684, 5057}
420-2048 Adjustable C-Frame Assembly{0629, 0632, 0738, 4000, 5050, 7000}
420-2048 Adjustable C-Frame Assembly{0629, 0632, 0738, 4000, 5050, 7000}
HVOF Identifier 396-9342 Group{0599, 0669, 0679, 7000}
HVOF Identifier 396-9342 Group{0599, 0669, 0679, 7000}
4-Inch Radial Hose Machine{0374, 0599, 0684, 0738, 5057}
4-Inch Radial Hose Machine{0374, 0599, 0684, 0738, 5057}
188-3242 Filter Cart Group and 227-2479 Filter Cart Group{0374, 0599, 0680, 0738, 0768, 5050, 5056, 5095}
188-3242 Filter Cart Group and 227-2479 Filter Cart Group{0374, 0599, 0680, 0738, 0768, 5050, 5056, 5095}
Procedures for Using the 212-1503 Portable Parts Washer{0374, 0599, 0680, 0699, 0700}
Procedures for Using the 212-1503 Portable Parts Washer{0374, 0599, 0680, 0699, 0700}
Using the 9U-5792, 4C-5052, 4C-5054, 4C-3670, and 4C-3680 Hydraulic Hose Machines{0374, 0599, 0684, 0738, 5057}
Using the 9U-5792, 4C-5052, 4C-5054, 4C-3670, and 4C-3680 Hydraulic Hose Machines{0374, 0599, 0684, 0738, 5057}
Using the 223-2105 Hose Cutting Machine{0374, 0599, 0678, 0684, 0708, 0738, 5057, 6060}
Using the 223-2105 Hose Cutting Machine{0374, 0599, 0678, 0684, 0708, 0738, 5057, 6060}
Crimping XT-3 ES and XT-5 S4G, MCSH, and MCSX Couplings Using 4C-3660, 4C-5052, 4C-5053, 9U-5792, or 9U-7261 Hose Machines{0374, 0599, 0684, 0738, 5057}
Crimping XT-3 ES and XT-5 S4G, MCSH, and MCSX Couplings Using 4C-3660, 4C-5052, 4C-5053, 9U-5792, or 9U-7261 Hose Machines{0374, 0599, 0684, 0738, 5057}
243-0765 Bench Model Hose Machine For Use With the 242-3567 Variable Crimp Die Bowl{0374, 0599, 0684, 0738, 5057}
243-0765 Bench Model Hose Machine For Use With the 242-3567 Variable Crimp Die Bowl{0374, 0599, 0684, 0738, 5057}
Crimping Permanent Couplings Using the 136-3642 Crimp Tool Group in Combination and XT Hose Machines{0374, 0599, 0684, 5057}
Crimping Permanent Couplings Using the 136-3642 Crimp Tool Group in Combination and XT Hose Machines{0374, 0599, 0684, 5057}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Installing 457-6030 (C3-290 Controller) on Hose Crimping Machines 233-8048, 286-4354, 286-4355, 275-6199, 286-4353, and 233-8038{0374, 0599, 0684, 0700, 0738, 5057}
Installing 457-6030 (C3-290 Controller) on Hose Crimping Machines 233-8048, 286-4354, 286-4355, 275-6199, 286-4353, and 233-8038{0374, 0599, 0684, 0700, 0738, 5057}
NEHS1214: 455-0126 Nitrogen Booster Pump Group {0374, 0599, 0647, 0756, 4263, 4331, 5077, 7200}
NEHS1214: 455-0126 Nitrogen Booster Pump Group {0374, 0599, 0647, 0756, 4263, 4331, 5077, 7200}
Base Mounted Recirculating Parts Washers {0374, 0599, 0680, 0699, 0700}
Base Mounted Recirculating Parts Washers {0374, 0599, 0680, 0699, 0700}
Reuse And Salvage Guidelines
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Filtration Times for Caterpillar Machine Fluid Compartments{0680, 0738, 0768, 3080, 5050, 5056, 5095}
Filtration Times for Caterpillar Machine Fluid Compartments{0680, 0738, 0768, 3080, 5050, 5056, 5095}
Crimputer III Setup and Operation{0684, 5057}
Crimputer III Setup and Operation{0684, 5057}
Contamination Control Guidelines
Procedure for Filtering <NOBR> 9U-5000</NOBR> Hydraulic Test Bench Hydraulic Oil {0680, 0738, 0768, 0784, 5050, 5056}
Procedure for Filtering 9U-5000 Hydraulic Test Bench Hydraulic Oil {0680, 0738, 0768, 0784, 5050, 5056}
Filtration Procedure for Excavator Hydraulic Oil {0680, 0768, 5050, 5056}
Filtration Procedure for Excavator Hydraulic Oil {0680, 0768, 5050, 5056}
Procedure for Operating Caterpillar Filter Carts {0680, 0768, 5050}
Procedure for Operating Caterpillar Filter Carts {0680, 0768, 5050}
Filtration Procedure for Wheel Loader, Wheel Dozer, Soil Compactor, Landfill Compactor Hydraulic Oil {0680, 0768, 5056, 5068}
Filtration Procedure for Wheel Loader, Wheel Dozer, Soil Compactor, Landfill Compactor Hydraulic Oil {0680, 0768, 5056, 5068}
Filtration Times for Caterpillar Machine Fluid Compartments{0680, 0738, 0768, 3080, 5050, 5056, 5095}
Filtration Times for Caterpillar Machine Fluid Compartments{0680, 0738, 0768, 3080, 5050, 5056, 5095}
Hose Products Reference Guide {0374, 0599, 0684, 0738, 5057}
Hose Products Reference Guide {0374, 0599, 0684, 0738, 5057}
Basic Principles of Kidney Loop Filtering Hydraulic Fluid Systems {0680, 0768, 5050, 5056}
Basic Principles of Kidney Loop Filtering Hydraulic Fluid Systems {0680, 0768, 5050, 5056}
Bench Test Procedures
Required Tooling for Bench Testing Hydraulic Components {0784, 4000, 4005, 4129, 4250, 4300, 5050}
Required Tooling for Bench Testing Hydraulic Components {0784, 4000, 4005, 4129, 4250, 4300, 5050}
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Systems Operation
Relief Valve (Line)
924H and 924Hz Wheel Loaders Hydraulic System
Specifications
Check Valve (Hydraulic Oil Cooler Bypass)
924H, 924HZ, 928HZ and 930H Wheel Loaders Hydraulic System
Combination Valve
924H, 924HZ, 928HZ and 930H Wheel Loaders Hydraulic System
Main Control Valve (4-Function)
924H, 924HZ, 928HZ and 930H Wheel Loaders Hydraulic System
Main Control Valve (3-Function)
924H, 924HZ, 928HZ and 930H Wheel Loaders Hydraulic System
Main Control Valve (2-Function)
924H, 924HZ, 928HZ and 930H Wheel Loaders Hydraulic System
Control Valve (Auxiliary)
924H, 924HZ, 928HZ and 930H Wheel Loaders Hydraulic System
Solenoid Valve (Hydraulic Lockout)
924H, 924HZ, 928HZ and 930H Wheel Loaders Hydraulic System
Tool Operating Manual
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
Systems Operation
Main Control Valve
924H and 924Hz Wheel Loaders Hydraulic System
Control Valve (Auxiliary)
924H and 924Hz Wheel Loaders Hydraulic System
Control Valve (Tilt) (VersaLink)
924H and 924Hz Wheel Loaders Hydraulic System
Control Valve (Lift) (VersaLink)
924H and 924Hz Wheel Loaders Hydraulic System
Disassembly and Assembly
Main Control Valve - Remove
924H, 924Hz, 928Hz and 930H Wheel Loaders Machine Systems
Main Control Valve - Disassemble
924H, 924Hz, 928Hz and 930H Wheel Loaders Machine Systems
Main Control Valve - Install
924H, 924Hz, 928Hz and 930H Wheel Loaders Machine Systems
Main Control Valve - Assemble
924H, 924Hz, 928Hz and 930H Wheel Loaders Machine Systems
Operation and Maintenance Manual
Hydraulic System Oil Sample - Obtain
924H, 924HZ, 928HZ and 930H Wheel Loaders
Contamination Control Guidelines
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Service Magazine
New Torque Specifications for the Orifice Plug in the Implement Control Valve {5051}
2011/05/05
Special Instruction
Installation of the 315-6343, 315-6344 Coupler Lines Gp for 924H and 924G and Installation of the 315-6341, 315-6342 Coupler Lines Gp for 930H and 930G{5057, 5147, 5734, 6129, 7332}
Installation of the 315-6343, 315-6344 Coupler Lines Gp for 924H and 924G and Installation of the 315-6341, 315-6342 Coupler Lines Gp for 930H and 930G{5057, 5147, 5734, 6129, 7332}
Procedure To Lengthen The Wires In The Joystick{5059, 5063, 5705}
Procedure To Lengthen The Wires In The Joystick{5059, 5063, 5705}
Specifications
Pilot Valve (Joystick)
924H, 924HZ, 928HZ and 930H Wheel Loaders Hydraulic System
Pilot Valve (Joystick)
924H, 924HZ, 928HZ and 930H Wheel Loaders Hydraulic System
Pilot Valve (Joystick)
924H, 924HZ, 928HZ and 930H Wheel Loaders Hydraulic System
Systems Operation
Pilot Valve
924H and 924Hz Wheel Loaders Hydraulic System
Troubleshooting
MID 081 - CID 0491 - FMI 03
924H, 924HZ, 928HZ and 930H Wheel Loaders
MID 081 - CID 0491 - FMI 05
924H, 924HZ, 928HZ and 930H Wheel Loaders
MID 081 - CID 0491 - FMI 06
924H, 924HZ, 928HZ and 930H Wheel Loaders
MID 081 - CID 0491 - FMI 13
924H, 924HZ, 928HZ and 930H Wheel Loaders
MID 081 - CID 0492 - FMI 03
924H, 924HZ, 928HZ and 930H Wheel Loaders
MID 081 - CID 0492 - FMI 05
924H, 924HZ, 928HZ and 930H Wheel Loaders
MID 081 - CID 0492 - FMI 06
924H, 924HZ, 928HZ and 930H Wheel Loaders
MID 081 - CID 0492 - FMI 13
924H, 924HZ, 928HZ and 930H Wheel Loaders
Disassembly and Assembly
Pilot Operated Hydraulic Control - Remove - If Equipped
924H, 924Hz, 928Hz and 930H Wheel Loaders Machine Systems
Pilot Operated Hydraulic Control - Disassemble - If Equipped
924H, 924Hz, 928Hz and 930H Wheel Loaders Machine Systems
Pilot Operated Hydraulic Control - Install - If Equipped
924H, 924Hz, 928Hz and 930H Wheel Loaders Machine Systems
Pilot Operated Hydraulic Control - Assemble - If Equipped
924H, 924Hz, 928Hz and 930H Wheel Loaders Machine Systems
Pilot Operated Hydraulic Control (Joystick) - Remove - If Equipped
924H, 924Hz, 928Hz and 930H Wheel Loaders Machine Systems
Pilot Operated Hydraulic Control (Joystick) - Disassemble - If Equipped
924H, 924Hz, 928Hz and 930H Wheel Loaders Machine Systems
Pilot Operated Hydraulic Control (Joystick) - Assemble - If Equipped
924H, 924Hz, 928Hz and 930H Wheel Loaders Machine Systems
Pilot Operated Hydraulic Control (Joystick) - Install - If Equipped
924H, 924Hz, 928Hz and 930H Wheel Loaders Machine Systems
Specifications
Pressure Reducing Valve (Pilot Oil)
924H, 924HZ, 928HZ and 930H Wheel Loaders Hydraulic System
Testing and Adjusting
Pilot System Pressure - Test
924H and 924Hz Wheel Loaders Hydraulic System
Disassembly and Assembly
Pressure Reducing Valve (Pilot Oil) - Remove and Install
924H, 924Hz, 928Hz and 930H Wheel Loaders Machine Systems
Specifications
Quick Coupler Valve
924H, 924HZ, 928HZ and 930H Wheel Loaders Hydraulic System
Systems Operation
Quick Coupler Control
924H and 924Hz Wheel Loaders Hydraulic System
Disassembly and Assembly
Control Valve (Quick Coupler) - Remove
924H, 924Hz, 928Hz and 930H Wheel Loaders Machine Systems
Control Valve (Quick Coupler) - Install
924H, 924Hz, 928Hz and 930H Wheel Loaders Machine Systems
Control Valve (Quick Coupler) - Disassemble
924H, 924Hz, 928Hz and 930H Wheel Loaders Machine Systems
Control Valve (Quick Coupler) - Assemble
924H, 924Hz, 928Hz and 930H Wheel Loaders Machine Systems
Tool Operating Manual
Repairing Line Relief Valve Seats in Hydraulic Control Valves Using the 229-3612 Hydraulic Valve Seat Repair Kit{0738, 5117}
Repairing Line Relief Valve Seats in Hydraulic Control Valves Using the 229-3612 Hydraulic Valve Seat Repair Kit{0738, 5117}
Systems Operation
Relief Valve (Line)
924H and 924Hz Wheel Loaders Hydraulic System
Testing and Adjusting
Relief Valve (Line) - Test and Adjust
924H and 924Hz Wheel Loaders Hydraulic System
Specifications
Ride Control Valve
924H, 924HZ, 928HZ and 930H Wheel Loaders Hydraulic System
Disassembly and Assembly
Ride Control Valve - Remove
924H, 924Hz, 928Hz and 930H Wheel Loaders Machine Systems
Ride Control Valve - Install
924H, 924Hz, 928Hz and 930H Wheel Loaders Machine Systems
Ride Control Valve - Disassemble
924H, 924Hz, 928Hz and 930H Wheel Loaders Machine Systems
Ride Control Valve - Assemble
924H, 924Hz, 928Hz and 930H Wheel Loaders Machine Systems
Specifications
Solenoid Valve (Hydraulic Lockout)
924H, 924HZ, 928HZ and 930H Wheel Loaders Hydraulic System
Solenoid Valve and Mounting (Hydraulic Lockout)
924H, 924HZ, 928HZ and 930H Wheel Loaders Hydraulic System
Solenoid Valve (Hydraulic Fan)
924H, 924HZ, 928HZ and 930H Wheel Loaders Braking and Hydraulic Fan System
Testing and Adjusting
Auxiliary Hydraulic System - Calibrate
924H and 924Hz Wheel Loaders Hydraulic System
Troubleshooting
MID 081 - CID 0291 - FMI 03
924H, 924HZ, 928HZ and 930H Wheel Loaders
MID 081 - CID 0291 - FMI 05
924H, 924HZ, 928HZ and 930H Wheel Loaders
MID 081 - CID 0291 - FMI 06
924H, 924HZ, 928HZ and 930H Wheel Loaders
MID 081 - CID 0491 - FMI 03
924H, 924HZ, 928HZ and 930H Wheel Loaders
MID 081 - CID 0491 - FMI 05
924H, 924HZ, 928HZ and 930H Wheel Loaders
MID 081 - CID 0491 - FMI 06
924H, 924HZ, 928HZ and 930H Wheel Loaders
MID 081 - CID 0491 - FMI 13
924H, 924HZ, 928HZ and 930H Wheel Loaders
MID 081 - CID 0492 - FMI 03
924H, 924HZ, 928HZ and 930H Wheel Loaders
MID 081 - CID 0492 - FMI 05
924H, 924HZ, 928HZ and 930H Wheel Loaders
MID 081 - CID 0492 - FMI 06
924H, 924HZ, 928HZ and 930H Wheel Loaders
MID 081 - CID 0492 - FMI 13
924H, 924HZ, 928HZ and 930H Wheel Loaders
MID 081 - CID 2292 - FMI 03
924H, 924HZ, 928HZ and 930H Wheel Loaders
MID 081 - CID 2292 - FMI 05
924H, 924HZ, 928HZ and 930H Wheel Loaders
MID 081 - CID 2292 - FMI 06
924H, 924HZ, 928HZ and 930H Wheel Loaders
MID 081 - CID 0882 - FMI 03
924H, 924HZ, 928HZ and 930H Wheel Loaders
MID 081 - CID 0882 - FMI 05
924H, 924HZ, 928HZ and 930H Wheel Loaders
MID 081 - CID 0882 - FMI 06
924H, 924HZ, 928HZ and 930H Wheel Loaders
Service Magazine
A New Coil Assembly is Now Used {5479}
2011/05/04

Truck sale:

Caterpillar 924H
 
Caterpillar 924H
- Wheel Loaders
FINNING CANADA
Caterpillar 924H, Wheel Loaders, Construction
47,733 
Caterpillar 924H, Wheel Loaders, Construction
- Wheel Loaders
TOROMONT CAT
 
 
Caterpillar 924H, Wheel Loaders, Construction


 
 
Caterpillar 924 H, Wheel Loaders, Construction


 
30,000 
Caterpillar 924H, Wheel Loaders, Construction


Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.