AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

391-4959 HARNESS AS-CONTROL PART OF 361-6292 WIRING GP-ELECTROHYDRAULIC 950K WHEEL LOADER


ELECTRICAL AND STARTING SYSTEM
HARNESS GP
ALTERNATOR GP-CHARGING
SWITCH GP
WIRING GP
POWER TRAIN
FILLER GP-POWER TRAIN OIL
MOTOR GP
FRAME AND BODY
FLOORPLATE GP
GUARD GP

WHEEL LOADER 950K WHEEL LOADER FER
 CUSTOM PRODUCT SUPPORT LITERATURE FOR CORROSION PROTECTION ARS FER00001-UP (MACHINE) SEBC1556 950K FER   (2012)

ELECTRICAL AND STARTING SYSTEM

HARNESS GP
391-4959 HARNESS AS-CONTROL
 

#SEBC15560010
 

391-4959: HARNESS AS-CONTROL

391-4959 HARNESS AS-CONTROL
PART OF 361-6292 WIRING GP-ELECTROHYDRAULIC
i04898589 SEBC1556
  For full view, you need register

Parts for your 950K WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  5I-4200 E GUARD (31-CM)  
  6V-2722 D TUBE-HEAT SHRINK (25.4-MM DIA)(0.1-M)  
  6V-9023 E TUBE-HEAT SHRINK (12.7-MM DIA)(4-CM)  
  8T-8737 [19] PLUG-SEAL  
  119-3662 E TUBE-HEAT SHRINK (10.85-MM DIA)(7-CM)  
  125-7874 E TUBE-HEAT SHRINK (5.72-MM DIA)(25-CM)  
  9X-3402 [44] SOCKET-CONNECTOR (16-GA TO 18-GA)  
    -OR-
  126-1768 [44] SOCKET-CONNECTOR (14-GA TO 16-GA)  
  9X-3401 [15] PIN-CONNECTOR (16-GA TO 18-GA)  
    -OR-
  126-1767 [15] PIN-CONNECTOR (14-GA TO 16-GA)  
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
  155-2271 [3] KIT-CONNECTING PLUG (4-PIN)  
  155-2274 [1] KIT-CONNECTING PLUG (6-PIN)  
    (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
  1P-0810 B [1] TAPE-ELECTRICAL  
  230-4011 [1] PLUG AS-CONNECTOR (2-PIN)  
  264-7029 [1] SEAL-CONNECTOR  
  230-4012 [1] RECEPTACLE AS-CONNECTOR (2-PIN)  
  230-4013 [1] PLUG AS-CONNECTOR (3-PIN)  
  264-7030 [1] SEAL-CONNECTOR  
  237-0227 [1] PLUG AS-CONNECTOR (3-PIN)  
  264-7030 [1] SEAL-CONNECTOR  
  241-8834 [1] PLUG AS-CONNECTOR (12-PIN)  
  264-7034 [1] SEAL-CONNECTOR  
  243-4510 [2] RECEPTACLE AS-CONNECTOR (12-PIN)  
  274-3781 [2] CAP-SEAL  
  281-8813 [1] PLUG AS-CONNECTOR (12-PIN)  
  264-7034 [1] SEAL-CONNECTOR  
  329-3734 BE TAPE-ELECTRICAL (149-CM)  
  374-7465 [1] CAP-SEAL  
  374-7466 [1] CAP-SEAL  
  B   USE AS REQUIRED
  D   ORDER BY THE METER
  E   ORDER BY THE CENTIMETER
 

#SEBC15560011
 

387-4189: KIT-ALTERNATOR

387-4189 KIT-ALTERNATOR -HEAVY-DUTY
S/N FER1-UP
CUSTOM
PART OF 423-5582 PROTECTION AR-CORROSION
i05226085 SEBC1556
3874189 KIT-ALTERNATOR Parts scheme
  For full view, you need register

Parts for your 950K WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 272-1889 Y [1] ALTERNATOR GP-CHARGING (24-VOLT, 150-AMPERE)  
2. 359-5145 [1] GUARD-ALTERNATOR  
3. 364-8305 [1] FILTER-FOAM (ALTERNATOR AIR)  
4. 6V-2313 M [3] BOLT (M5X0.8X30-MM)  
5. 8T-0328 [3] WASHER-HARD (5.5X10X1-MM THK)  
6. 8T-4121 [4] WASHER-HARD (11X21X2.5-MM THK)  
7. 8T-4198 M [4] BOLT (M10X1.5X100-MM)  
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBC15560012
 

425-6492: SWITCH GP-DISCONNECT

425-6492 SWITCH GP-DISCONNECT -CORROSION RESISTANT
CUSTOM
PART OF 423-5582, 440-6145, 462-6760 PROTECTION AR-CORROSION
i05226069 SEBC1556
  For full view, you need register

Parts for your 950K WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  Y [1] PLATFORM GP (CORROSION RESISTANT, LH)  
   
  187-0788 [2] BOLT (M6X1X20-MM)  
  230-6177 [1] FILM-INSTRUCTION (BATTERY DISCONNECT)  
  191-2063 [2] NUT (M6X1-THD)  
  229-2458 [1] SWITCH AS-DISCONNECT (BATTERY)  
  187-0789 [4] WASHER (6.4X12.5X1.6-MM THK)  
   
    ****STANDARD REMOVAL****
  3E-8320 H [1] PLATE-INSTRUCTION (BATTERY)  
  7N-0718 H [1] SWITCH GP-DISCONNECT (BATTERY)  
  372-0654 J [1] PLATFORM GP (LH)  
  H   PART OF STANDARD BATTERY & WIRING GP
  J   PART OF STANDARD LADDER & WALKWAY GP
  Y   SEPARATE ILLUSTRATION
 

#SEBC15560013
 

361-6292: WIRING GP-ELECTROHYDRAULIC

361-6292 WIRING GP-ELECTROHYDRAULIC
S/N FLL1-382; FER1-870
PART OF 344-3969 CONTROL & MTG GP-ELHYD
i04631507 SEBC1556
3616292 WIRING GP-ELECTROHYDRAULIC Parts scheme 3616292 WIRING GP-ELECTROHYDRAULIC Parts scheme
  For full view, you need register

Parts for your 950K WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-8737 [18] PLUG-SEAL  
2. 228-6089 [2] PLUG (ROCKER SWITCH)  
3. 230-4009 [2] PLUG AS-CONNECTOR (12-PIN)  
    (EACH INCLUDES)
  264-7034 [1] SEAL-CONNECTOR  
5. 307-4671 Y [2] CONTROL GP-HANDLE (PILOT CONTROL)  
6. 332-2155 [1] SWITCH AS-PUSH BUTTON (DOWNSHIFT)  
6A. 332-2155 [1] SWITCH AS-PUSH BUTTON (HORN)  
    (EACH SWITCH AS INCLUDES)
  6F-0253 [1] LOCKWASHER  
  9X-3402 [3] SOCKET-CONNECTOR (16-GA TO 18-GA)  
    -OR-
  126-1768 [3] SOCKET-CONNECTOR (14-GA TO 16-GA)  
  172-3511 [1] NUT (5/8-24-THD)  
7. 346-1069 [1] PLATE AS  
8. 391-4959 Y [1] HARNESS AS-CONTROL (ELECTROHYDRAULIC CONTROL POD)  
9. 127-2170 CM [5] SCREW-TRUSS HEAD (M8X1.25X20-MM)  
10. 7C-4354 [5] CLIP  
11. 3E-4352 [3] WASHER-HARD (8.8X20.5X2.5-MM THK)  
12. 3S-2093 C [9] STRAP-CABLE  
14. 5C-7261 CM [1] NUT (M8X1.25-THD)  
15. 8R-3695 [3] GROMMET  
16. 8T-4908 M [1] BOLT (M8X1.25X25-MM)  
17. 8T-4224 C [2] WASHER-HARD (8.8X16X2-MM THK)  
18. 9X-2045 M [8] SCREW-TRUSS HEAD (M6X1X20-MM)  
19. 4P-8134 C [1] CLIP (LADDER)  
20. 7K-1181 C [1] STRAP-CABLE  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBC15560014
 

361-6292: WIRING GP-ELECTROHYDRAULIC

361-6292 WIRING GP-ELECTROHYDRAULIC
S/N FLL383-UP; FER871-UP
PART OF 344-3969 CONTROL & MTG GP-ELHYD
i05926838 SEBC1556
3616292 WIRING GP-ELECTROHYDRAULIC Parts scheme 3616292 WIRING GP-ELECTROHYDRAULIC Parts scheme
  For full view, you need register

Parts for your 950K WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-8737 [18] PLUG-SEAL  
2. 228-6089 [2] PLUG (ROCKER SWITCH)  
3. 230-4009 [2] PLUG AS-CONNECTOR (12-PIN)  
    (EACH INCLUDES)
  455-0709 [1] SEAL-CONNECTOR  
5. 361-6015 C [2] CONTROL GP-HANDLE (PILOT CONTROL)  
    (EACH INCLUDES)
  151-9274 [1] KIT-RECEPTACLE (4-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
6. 332-2155 [1] SWITCH AS-PUSH BUTTON (DOWNSHIFT)  
6A. 332-2155 [1] SWITCH AS-PUSH BUTTON (HORN)  
    (EACH SWITCH AS INCLUDES)
  6F-0253 [1] LOCKWASHER  
  9X-3402 [3] SOCKET-CONNECTOR (16-GA TO 18-GA)  
    -OR-
  126-1768 [3] SOCKET-CONNECTOR (14-GA TO 16-GA)  
  172-3511 [1] NUT (5/8-24-THD)  
7. 346-1069 [1] PLATE AS  
8. 391-4959 Y [1] HARNESS AS-CONTROL (ELECTROHYDRAULIC CONTROL POD)  
9. 127-2170 M [5] SCREW-TRUSS HEAD (M8X1.25X20-MM)  
10. 7C-4354 [5] CLIP  
11. 3E-4352 [3] WASHER-HARD (8.8X20.5X2.5-MM THK)  
12. 3S-2093 [9] STRAP-CABLE  
14. 5C-7261 M [1] NUT (M8X1.25-THD)  
15. 8R-3695 [3] GROMMET  
16. 8T-4908 M [1] BOLT (M8X1.25X25-MM)  
17. 8T-4224 [2] WASHER-HARD (8.8X16X2-MM THK)  
18. 9X-2045 M [8] SCREW-TRUSS HEAD (M6X1X20-MM)  
19. 4P-8134 [1] CLIP (LADDER)  
20. 7K-1181 [1] STRAP-CABLE  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBC15560015
 

425-5298: WIRING GP-PROTECTION

425-5298 WIRING GP-PROTECTION -CORROSION RESISTANT
CUSTOM
PART OF 423-5582, 440-6145, 462-6760 PROTECTION AR-CORROSION
i05226067 SEBC1556
  For full view, you need register

Parts for your 950K WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  151-1340 B GREASE-DIELECTRIC  
  3S-2093 B [32] STRAP-CABLE  
  6K-0806 B [3] STRAP-CABLE  
  7X-2639 BE TUBE-HEAT SHRINK (50.8-MM DIA)(110-CM)  
  135-5009 BE TUBE-HEAT SHRINK (32-MM DIA)(650-CM)  
  210-8958 BE TUBE-HEAT SHRINK (24-MM DIA)(180-CM)  
  B   USE AS REQUIRED
  E   ORDER BY THE CENTIMETER
 

#SEBC15560016
 

422-9263: COVER GP-XMSN OIL FILLER CAP

422-9263 COVER GP-XMSN OIL FILLER CAP -CORROSION RESISTANT
CUSTOM
PART OF 422-9262 COVER GP-PROTECTION
i05226909 SEBC1556
4229263 COVER GP-XMSN OIL FILLER CAP Parts scheme
  For full view, you need register

Parts for your 950K WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 195-1871 [1] LEVER  
2. 195-1872 [1] COVER  
3. 195-1873 [1] CAP AS-FILLER (TRANSMISSION OIL)  
   
    ****STANDARD REMOVAL****
  5K-1568 FJ [1] CAP-FILLER (TRANSMISSION OIL)  
  7K-5634 FJ [1] COVER  
  9M-7394 FJ [1] LEVER  
  F   NOT SHOWN
  J   PART OF STANDARD COVER GP-XMSN OIL FILLER CAP
 

#SEBC15560017
 

246-6152: MOTOR GP-GEAR

246-6152 MOTOR GP-GEAR -HYDRAULIC FAN
PART OF 430-3507 RADIATOR & FAN GP
i02232153 SEBC1556
2466152 MOTOR GP-GEAR Parts scheme
  For full view, you need register

Parts for your 950K WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 250-0492 [4] BOLT (M12X1.75X115-MM)  
2. 136-9030 [4] WASHER (12.5X18X1.5-MM THK)  
3. 150-3378 J [1] SEAL-SHAFT  
4. 096-0194 J [1] RING-RETAINING  
5. 9S-4191 [1] PLUG (9/16-18-THD)  
6. 3J-1907 [1] SEAL-O-RING  
   
    AVAILABLE REPAIR KIT(S):
  194-9632 J [1] KIT-SEAL (GEAR MOTOR)  
    (INCLUDES SEALS & RINGS)
  J   KIT MARKED J SERVICES PART(S) MARKED J
 

#SEBC15560018
 

279-0226: FLOORPLATE GP

279-0226 FLOORPLATE GP
PART OF 431-7232 CAB AR-ENCLOSED ROPS
i05058501 SEBC1556
2790226 FLOORPLATE GP Parts scheme
  For full view, you need register

Parts for your 950K WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8D-6542 C [17] GROMMET  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBC15560019
 

350-1285: GUARD GP-FRONT

350-1285 GUARD GP-FRONT
PART OF 440-6145, 462-6760 PROTECTION AR-CORROSION
i04825315 SEBC1556
3501285 GUARD GP-FRONT Parts scheme
  For full view, you need register

Parts for your 950K WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 355-5345 Y [1] GUARD GP-FRONT  
2. 8T-2561 [9] WASHER-HARD (10.5X28.5X5-MM THK)  
3. 8T-4136 M [9] BOLT (M10X1.5X25-MM)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

Information:

Special Instruction
Update Procedure for Relocating Payload Control System (PCS) Sensors on Certain Medium Wheel Loaders{1408, 1439, 5057, 5102, 7494}
Update Procedure for Relocating Payload Control System (PCS) Sensors on Certain Medium Wheel Loaders{1408, 1439, 5057, 5102, 7494}
Procedure to Install Secondary Steering Hardware on Certain 950K and 962K Wheel Loaders{1408, 4300, 4304, 430S, 4324, 5067}
Procedure to Install Secondary Steering Hardware on Certain 950K and 962K Wheel Loaders{1408, 4300, 4304, 430S, 4324, 5067}
Procedure to Replace the 275-6706 Blower Motor As with a 361-5586 Blower As in the Operator Cabs on Certain K- Series Medium Wheel Loaders{1408, 7320}
Procedure to Replace the 275-6706 Blower Motor As with a 361-5586 Blower As in the Operator Cabs on Certain K- Series Medium Wheel Loaders{1408, 7320}
Installation Procedure for the 192-7805 Seat Compressor Harness{1408, 7312, 7324}
Installation Procedure for the 192-7805 Seat Compressor Harness{1408, 7312, 7324}
Procedure to Install the Rear Axle Oil Cooler on Certain 950K and 962K Wheel Loaders {1365, 1408, 3016, 5057, 5070, 7620}
Procedure to Install the Rear Axle Oil Cooler on Certain 950K and 962K Wheel Loaders {1365, 1408, 3016, 5057, 5070, 7620}
Adding a Second Pressure Sensor for Secondary Steering System{1408, 1439, 4275, 4300, 4304, 430S, 5067, 7610, 7620}
Adding a Second Pressure Sensor for Secondary Steering System{1408, 1439, 4275, 4300, 4304, 430S, 5067, 7610, 7620}
Alternator Charging System Improvement For Certain 950K and 962K Wheel Loaders{1405, 1408, 4459}
Alternator Charging System Improvement For Certain 950K and 962K Wheel Loaders{1405, 1408, 4459}
Installation of Four Point Seat Belt on Certain Medium Wheel Loaders with Left-Hand Steering Device {1408, 5258, 5702, 7312, 7324, 7327}
Installation of Four Point Seat Belt on Certain Medium Wheel Loaders with Left-Hand Steering Device {1408, 5258, 5702, 7312, 7324, 7327}
Installation of Four Point Seat Belt on Certain Medium Wheel Loaders with Steering Wheel {1408, 5258, 5702, 7312, 7324, 7327}
Installation of Four Point Seat Belt on Certain Medium Wheel Loaders with Steering Wheel {1408, 5258, 5702, 7312, 7324, 7327}
<NOBR>483-5477</NOBR> Printer Kit Installation on Certain Medium Wheel Loaders {1408, 7490, 7494, 749P, 7610, 7620}
483-5477 Printer Kit Installation on Certain Medium Wheel Loaders {1408, 7490, 7494, 749P, 7610, 7620}
Connector Identification, Removal, Disassembly, Reassembly, and Installation for All Cat<SUP>&reg;</SUP> Products Equipped with BR Series Connectors {1408}
Connector Identification, Removal, Disassembly, Reassembly, and Installation for All Cat® Products Equipped with BR Series Connectors {1408}
Procedure to Install Cat Production Measurement (CPM) Kit On Certain Series K Medium Wheel Loaders {1408, 7000, 7490, 7606}
Procedure to Install Cat Production Measurement (CPM) Kit On Certain Series K Medium Wheel Loaders {1408, 7000, 7490, 7606}
Procedure to Replace Armature of Starter Motor On All Cat<SUP>&reg;</SUP> Products {1408, 1450, 1453}
Procedure to Replace Armature of Starter Motor On All Cat® Products {1408, 1450, 1453}
Procedure to Replace Commutator End (CE) Housing of Starter Motor On All Cat<SUP>&reg;</SUP> Products {1408, 1450, 1453}
Procedure to Replace Commutator End (CE) Housing of Starter Motor On All Cat® Products {1408, 1450, 1453}
Service Letter-NACD
PRODUCT SUPPORT PROGRAM FOR REPLACING THE COOLANT TANK GROUP ON CERTAIN 950K, 962K, 966K, 966K XE, 972K, AND 980K MEDIUM WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE COOLANT TANK GROUP ON CERTAIN 950K, 962K, 966K, 966K XE, 972K, AND 980K MEDIUM WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE TRANSMISSION HARNESS ON CERTAIN 950K AND 962K MEDIUM WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE TRANSMISSION HARNESS ON CERTAIN 950K AND 962K MEDIUM WHEEL LOADERS
Service Letter-Australia
PRODUCT SUPPORT PROGRAM FOR REPLACING THE COOLANT TANK GROUP ON CERTAIN 950K, 962K, 966K, 966K XE, 972K, AND 980K MEDIUM WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE COOLANT TANK GROUP ON CERTAIN 950K, 962K, 966K, 966K XE, 972K, AND 980K MEDIUM WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE TRANSMISSION HARNESS ON CERTAIN 950K AND 962K MEDIUM WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE TRANSMISSION HARNESS ON CERTAIN 950K AND 962K MEDIUM WHEEL LOADERS
Service Letter-CFEL
PRODUCT SUPPORT PROGRAM FOR REPLACING THE COOLANT TANK GROUP ON CERTAIN 950K, 962K, 966K, 966K XE, 972K, AND 980K MEDIUM WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE COOLANT TANK GROUP ON CERTAIN 950K, 962K, 966K, 966K XE, 972K, AND 980K MEDIUM WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE TRANSMISSION HARNESS ON CERTAIN 950K AND 962K MEDIUM WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE TRANSMISSION HARNESS ON CERTAIN 950K AND 962K MEDIUM WHEEL LOADERS
Service Letter-CSARL
PRODUCT SUPPORT PROGRAM FOR REPLACING THE COOLANT TANK GROUP ON CERTAIN 950K, 962K, 966K, 966K XE, 972K, AND 980K MEDIUM WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE COOLANT TANK GROUP ON CERTAIN 950K, 962K, 966K, 966K XE, 972K, AND 980K MEDIUM WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE TRANSMISSION HARNESS ON CERTAIN 950K AND 962K MEDIUM WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE TRANSMISSION HARNESS ON CERTAIN 950K AND 962K MEDIUM WHEEL LOADERS
Service Letter-Americas
PRODUCT SUPPORT PROGRAM FOR REPLACING THE COOLANT TANK GROUP ON CERTAIN 950K, 962K, 966K, 966K XE, 972K, AND 980K MEDIUM WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE COOLANT TANK GROUP ON CERTAIN 950K, 962K, 966K, 966K XE, 972K, AND 980K MEDIUM WHEEL LOADERS
Technical Information Bulletin
Wrong Resistor May be Installed into <NOBR>176-9668</NOBR> Instrument Console Gp on Certain Excavators and Wheel Loaders {1408, 1437, 6129}
Wrong Resistor May be Installed into 176-9668 Instrument Console Gp on Certain Excavators and Wheel Loaders {1408, 1437, 6129}
Tool Operating Manual
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Service Letter-China
PRODUCT SUPPORT PROGRAM FOR REPLACING THE COOLANT TANK GROUP ON CERTAIN 950K, 962K, 966K, 966K XE, 972K, AND 980K MEDIUM WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE COOLANT TANK GROUP ON CERTAIN 950K, 962K, 966K, 966K XE, 972K, AND 980K MEDIUM WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE TRANSMISSION HARNESS ON CERTAIN 950K AND 962K MEDIUM WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE TRANSMISSION HARNESS ON CERTAIN 950K AND 962K MEDIUM WHEEL LOADERS
Service Letter-Asia
PRODUCT SUPPORT PROGRAM FOR REPLACING THE COOLANT TANK GROUP ON CERTAIN 950K, 962K, 966K, 966K XE, 972K, AND 980K MEDIUM WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE COOLANT TANK GROUP ON CERTAIN 950K, 962K, 966K, 966K XE, 972K, AND 980K MEDIUM WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE TRANSMISSION HARNESS ON CERTAIN 950K AND 962K MEDIUM WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE TRANSMISSION HARNESS ON CERTAIN 950K AND 962K MEDIUM WHEEL LOADERS
Reuse And Salvage Guidelines
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Service Letter-APD
PRODUCT SUPPORT PROGRAM FOR REPLACING THE COOLANT TANK GROUP ON CERTAIN 950K, 962K, 966K, 966K XE, 972K, AND 980K MEDIUM WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE COOLANT TANK GROUP ON CERTAIN 950K, 962K, 966K, 966K XE, 972K, AND 980K MEDIUM WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE TRANSMISSION HARNESS ON CERTAIN 950K AND 962K MEDIUM WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE TRANSMISSION HARNESS ON CERTAIN 950K AND 962K MEDIUM WHEEL LOADERS
Service Magazine
The Special Instruction, REHS7729 , "Field Installation Instructions for the Payload Control/Autodig Systems on Certain Wheel Loaders" and Special Instruction, REHS5483 , "Update Procedure for Relocating Payload Control System (PCS) Sensors on Certain Medium Wheel Loaders" Is Now Used. {1408, 1439, 5057, 5102, 7494}
2013/10/29
A Procedure Is Available to Make Improvements to the Alternator Charging System For Certain 950K and 962K Wheel Loaders {1405, 1408, 4459}
2014/11/17
A New Procedure Is Available to Improve Reliability of Front Harness on 950K and 962K Wheel Loaders {1408}
2014/09/11
Improved Wire Harnesses Are Used for Certain Wheel Loaders {1408, 795C}
2014/12/18
New Transmission Harness Design Now Being Used on Certain 950K and 962K Medium Loaders {1408, 3073, 3167}
2014/12/18
Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}
Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}

Caterpillar Parts SIS Catalog 950K :

ALTERNATOR GP-CHARGING
459-2938 ALTERNATOR GP-CHARGING
ALTERNATOR GP-CHARGING
272-1889 ALTERNATOR GP-CHARGING
PRECLEANER GP
340-1427 PRECLEANER GP
PRECLEANER GP
340-1426 PRECLEANER GP
RADIATOR & FAN GP
430-3507 RADIATOR & FAN GP
PROTECTION GP-CORROSION
426-3500 PROTECTION GP-CORROSION
462-6760 PROTECTION AR-CORROSION
440-6145 PROTECTION AR-CORROSION
KIT-ALTERNATOR
387-4189 KIT-ALTERNATOR
425-6492 SWITCH GP-DISCONNECT
WIRING GP-ELECTROHYDRAULIC
361-6292 WIRING GP-ELECTROHYDRAULIC
WIRING GP-ELECTROHYDRAULIC
361-6292 WIRING GP-ELECTROHYDRAULIC
425-5298 WIRING GP-PROTECTION
COVER GP-XMSN OIL FILLER CAP
422-9263 COVER GP-XMSN OIL FILLER CAP
MOTOR GP-GEAR
246-6152 MOTOR GP-GEAR
FLOORPLATE GP
279-0226 FLOORPLATE GP

Truck sale:

Caterpillar 950K
 
Caterpillar 950K
- Wheel Loaders
CARTER MACHINERY COMPANY, INC.
 
148,000 
Caterpillar 950K, Wheel Loaders, Construction
- Wheel Loaders
WESTERN STATES EQUIPMENT
Caterpillar 950K, Wheel Loaders, Construction
156,804 
Caterpillar 950K, Wheel Loaders, Construction
- Wheel Loaders
FINNING CANADA
 
65,878 
Caterpillar 950K, Wheel Loaders, Construction
- Wheel Loaders
ZEPPELIN BAUMASCHINEN
Caterpillar 950K FC, Wheel Loaders, Construction
172,000 
Caterpillar 950K FC, Wheel Loaders, Construction
- Wheel Loaders
WAGNER EQUIPMENT CO
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.