419–9832 STEEL MILL ARRANGEMENT CUSTOM PRODUCT SUPPORT LITERATURE FOR THE 950H WHEEL LOADER JLX00001-UP (MACHINE) ELECTRICAL AND STARTING SYSTEM Caterpillar SIS

Troubleshooting

Alarm - Test
950H, 962H, 966H, 972H, 980H and 986H Wheel Loaders 5 Gauge Cluster

Alarm - Test
950H Wheel Loader and 962H
Wheel Loader Power Train

Engine News

Charging System Troubleshooting Guide Has Been Updated for All Engines {1406, 7569}
Charging System Troubleshooting Guide Has Been Updated for All Engines {1406, 7569}

Operation and Maintenance Manual

Belt - Inspect/Adjust/Replace
950H and 962H Wheel Loaders

Special Instruction

Charging System Troubleshooting {1406}
Charging System Troubleshooting {1406}

Procedure for Replacing Regulator Kit on All Engines {1405}
Procedure for Replacing Regulator Kit on All Engines {1405}

Procedure to Install Brush Holder Assembly to End Frame on All Engines {1405}
Procedure to Install Brush Holder Assembly to End Frame on All Engines {1405}

Specifications

Alternator
962H Wheel Loader and 962H
Wheel Loader Machine Systems

Testing and Adjusting

Charging System - Test
C7 Engines for Caterpillar Built Machines

Troubleshooting

MID 124 - CID 0168 - FMI 00
Machine Security System

MID 124 - CID 0168 - FMI 01
Machine Security System

Alternator - Charging Problem and/or Noisy Operation
C7 Engines for IT62H Integrated Toolcarrier and for 950H and 962H Wheel Loaders

MID 074 - CID 0168 - FMI 03
Medium Wheel Loaders (MWL) Payload Control System (PCS) 3.0

MID 074 - CID 0168 - FMI 04
Medium Wheel Loaders (MWL) Payload Control System (PCS) 3.0

Charging System - Test
950H Wheel Loader and 962H
Wheel Loader Electrohydraulic System

Disassembly and Assembly

Alternator - Remove and Install
C7
Engines for Caterpillar Built Machines

Alternator - Remove and Install
950H and 962H Wheel Loaders C7 Engine Supplement

Service Magazine

Charging System Troubleshooting Guide Has Been Updated for All Machines {1406, 7569}
Charging System Troubleshooting Guide Has Been Updated for All Machines {1406, 7569}

Operation and Maintenance Manual

Battery or Battery Cable - Inspect/Replace
950H and 962H Wheel Loaders

Battery Hold-Down - Tighten
950H and 962H Wheel Loaders

Battery - Clean
950H and 962H Wheel Loaders

Technical Information Bulletin

Process for Communicating an Incident with a Battery{1401}
Process for Communicating an Incident with a Battery{1401}

Tool Operating Manual

M0077220 (NEHS1231) 115V & 230V Battery Chargers {1401, 751B}
M0077220 (NEHS1231) 115V & 230V Battery Chargers {1401, 751B}

M0090131 Battery Analyzer 480-4181 (484-4859 Group) {0374, 0599, 0709, 1401, 7468}
M0090131 Battery Analyzer 480-4181 (484-4859 Group) {0374, 0599, 0709, 1401, 7468}

Testing and Adjusting

Battery - Test
C7 Engines for Caterpillar Built Machines

Troubleshooting

CID 0168 FMI 02 System Voltage intermittent/erratic
C7 and C9 Engines for Caterpillar Built Machines

Battery
C7 Engines for IT62H Integrated Toolcarrier and for 950H and 962H Wheel Loaders

MID 124 - CID 0168 - FMI 00
Machine Security System

MID 124 - CID 0168 - FMI 01
Machine Security System

CID 0168 FMI 01 System Voltage Low
C7 Engines for IT62H Integrated Toolcarrier and for 950H and 962H Wheel Loaders

CID 0168 FMI 02 System Voltage intermittent/erratic
C7 Engines for IT62H Integrated Toolcarrier and for 950H and 962H Wheel Loaders

CID 0168 FMI 00 System Voltage High
C7 Engines for IT62H Integrated Toolcarrier and for 950H and 962H Wheel Loaders

Electrical Power Supply Circuit - Test
C7 Engines for IT62H Integrated Toolcarrier and for 950H and 962H Wheel Loaders

MID 074 - CID 0168 - FMI 03
Medium Wheel Loaders (MWL) Payload Control System (PCS) 3.0

MID 074 - CID 0168 - FMI 04
Medium Wheel Loaders (MWL) Payload Control System (PCS) 3.0

Electrical Power Supply - Test
950H Wheel Loader and 962H
Wheel Loader Power Train

Electrical Power Supply - Test
950H, 962H, 966H, 972H, 980H and 986H Wheel Loaders 5 Gauge Cluster

Electrical Power Supply - Test
950H Wheel Loader and 962H
Wheel Loader Electrohydraulic System

Charging System - Test
950H Wheel Loader and 962H
Wheel Loader Electrohydraulic System

Electrical Power Supply - Test
MSS3s Machine Security System

Systems Operation

Electronic Control Module
950H Wheel Loader and 962H
Wheel Loader Electrohydraulic System

Service Magazine

An Upgrade Is Available For the HVAC Electrical Circuit on Certain Medium Wheel Loaders {1408, 1417, 7320}
2015/06/12

Specifications

Control (Autodig)
962H Wheel Loader and 962H
Wheel Loader Machine Systems

Special Instruction

Procedure to Install Printer Kit in the Cab on Certain Medium Wheel Loaders {1408, 7490, 7494, 749P, 7610, 7620}
Procedure to Install Printer Kit in the Cab on Certain Medium Wheel Loaders {1408, 7490, 7494, 749P, 7610, 7620}

Tool Operating Manual

Using the 4C-8195 Control Service Tool{0374, 0599, 0709, 7490}
Using the 4C-8195 Control Service Tool{0374, 0599, 0709, 7490}

Systems Operation

Electronic Control Module
950H Wheel Loader and 962H
Wheel Loader Electrohydraulic System

Testing and Adjusting

Control Module - Replace
924K, 930K, 938K, 950G II, 950H, 950K, 950L, 950M, 950M Z, 962G II, 962H, 962K, 962L, 962M, 962M Z, 966G II, 966H, 966K, 966L, 966M, 966M XE, 972G II, 972H, 972K, 972L, 972M, 972M XE, 980G II, 980H, 980K, 980L, 980M and 982M Wheel Loaders Automatic Lubrication System

Service Magazine

New Radio Software Is Now Available For Product Link 522 and 523 Radio On All Cat ® Products {7610, 7620}
2014/02/06

A New Autolube Pump and Internal Circuit Board Are Now Available for Certain Wheel Loaders and Articulated Trucks {1408, 7516, 7540, 7610, 7620}
A New Autolube Pump and Internal Circuit Board Are Now Available for Certain Wheel Loaders and Articulated Trucks {1408, 7516, 7540, 7610, 7620}

Military Electronic Technician (Military ET) Is Now Available For Military Personnel {0374, 0376, 0599, 1000, 7000, 7610, 7620}
Military Electronic Technician (Military ET) Is Now Available For Military Personnel {0374, 0376, 0599, 1000, 7000, 7610, 7620}

Engine News

A New Electronic Control Module Wash Out Process {1901, 1920}
A New Electronic Control Module Wash Out Process {1901, 1920}

New CAT Inspect Form Available for EMCP Troubleshooting and Inspection {0374, 4490, 7451, 7620}
New CAT Inspect Form Available for EMCP Troubleshooting and Inspection {0374, 4490, 7451, 7620}

Operation and Maintenance Manual

Welding on Machines and Engines with Electronic Controls
950H and 962H Wheel Loaders

Special Instruction

Instructions for Communicating With and Flashing the 10R-4085 Engine Electronic Control Gp and the 10R-1824 Engine Electronic Control Gp {1901, 1920}
Instructions for Communicating With and Flashing the 10R-4085 Engine Electronic Control Gp and the 10R-1824 Engine Electronic Control Gp {1901, 1920}

Diagnostic Code Information for Caterpillar ® Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Diagnostic Code Information for Caterpillar ^® Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}

Procedure to Flash the ADEM 3 Engine Electronic Control Gp {1901, 1920}
Procedure to Flash the ADEM 3 Engine Electronic Control Gp {1901, 1920}

Service Letter-NACD

PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE ON CERTAIN 950F, 950G, 950H, 950K, 960F, 962G, 962H, 962H, 962K, 966E, 966F, 966G, 966H, 966H, 966K, 970F, 972G, 972H, 972K, 980C, 980F, 980G, 980H, AND 980K WHEEL LOADERS, IT62G, AND IT62H�INTEGRATED TOOLCARRIERS
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE ON CERTAIN 950F, 950G, 950H, 950K, 960F, 962G, 962H, 962H, 962K, 966E, 966F, 966G, 966H, 966H, 966K, 970F, 972G, 972H, 972K, 980C, 980F, 980G, 980H, AND 980K WHEEL LOADERS, IT62G, AND IT62H�INTEGRATED TOOLCARRIERS

PRODUCT SUPPORT PROGRAM FOR UPDATING SOFTWARE ON CERTAIN WHEEL LOADERS, WHEEL DOZERS, INTEGRATED TOOLCARRIERS, LANDFILL COMPACTORS, AND SOIL COMPACTORS
PRODUCT SUPPORT PROGRAM FOR UPDATING SOFTWARE ON CERTAIN WHEEL LOADERS, WHEEL DOZERS, INTEGRATED TOOLCARRIERS, LANDFILL COMPACTORS, AND SOIL COMPACTORS

Service Letter-Australia

PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE ON CERTAIN 950F, 950G, 950H, 950K, 960F, 962G, 962H, 962H, 962K, 966E, 966F, 966G, 966H, 966H, 966K, 970F, 972G, 972H, 972K, 980C, 980F, 980G, 980H, AND 980K WHEEL LOADERS, IT62G, AND IT62H�INTEGRATED TOOLCARRIERS
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE ON CERTAIN 950F, 950G, 950H, 950K, 960F, 962G, 962H, 962H, 962K, 966E, 966F, 966G, 966H, 966H, 966K, 970F, 972G, 972H, 972K, 980C, 980F, 980G, 980H, AND 980K WHEEL LOADERS, IT62G, AND IT62H�INTEGRATED TOOLCARRIERS

PRODUCT SUPPORT PROGRAM FOR UPDATING SOFTWARE ON CERTAIN WHEEL LOADERS, WHEEL DOZERS, INTEGRATED TOOLCARRIERS, LANDFILL COMPACTORS, AND SOIL COMPACTORS
PRODUCT SUPPORT PROGRAM FOR UPDATING SOFTWARE ON CERTAIN WHEEL LOADERS, WHEEL DOZERS, INTEGRATED TOOLCARRIERS, LANDFILL COMPACTORS, AND SOIL COMPACTORS

Service Letter-CFEL

PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE ON CERTAIN 950F, 950G, 950H, 950K, 960F, 962G, 962H, 962H, 962K, 966E, 966F, 966G, 966H, 966H, 966K, 970F, 972G, 972H, 972K, 980C, 980F, 980G, 980H, AND 980K WHEEL LOADERS, IT62G, AND IT62H�INTEGRATED TOOLCARRIERS
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE ON CERTAIN 950F, 950G, 950H, 950K, 960F, 962G, 962H, 962H, 962K, 966E, 966F, 966G, 966H, 966H, 966K, 970F, 972G, 972H, 972K, 980C, 980F, 980G, 980H, AND 980K WHEEL LOADERS, IT62G, AND IT62H�INTEGRATED TOOLCARRIERS

PRODUCT SUPPORT PROGRAM FOR UPDATING SOFTWARE ON CERTAIN WHEEL LOADERS, WHEEL DOZERS, INTEGRATED TOOLCARRIERS, LANDFILL COMPACTORS, AND SOIL COMPACTORS
PRODUCT SUPPORT PROGRAM FOR UPDATING SOFTWARE ON CERTAIN WHEEL LOADERS, WHEEL DOZERS, INTEGRATED TOOLCARRIERS, LANDFILL COMPACTORS, AND SOIL COMPACTORS

Service Letter-CSARL

PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE ON CERTAIN 950F, 950G, 950H, 950K, 960F, 962G, 962H, 962H, 962K, 966E, 966F, 966G, 966H, 966H, 966K, 970F, 972G, 972H, 972K, 980C, 980F, 980G, 980H, AND 980K WHEEL LOADERS, IT62G, AND IT62H�INTEGRATED TOOLCARRIERS
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE ON CERTAIN 950F, 950G, 950H, 950K, 960F, 962G, 962H, 962H, 962K, 966E, 966F, 966G, 966H, 966H, 966K, 970F, 972G, 972H, 972K, 980C, 980F, 980G, 980H, AND 980K WHEEL LOADERS, IT62G, AND IT62H�INTEGRATED TOOLCARRIERS

PRODUCT SUPPORT PROGRAM FOR UPDATING SOFTWARE ON CERTAIN WHEEL LOADERS, WHEEL DOZERS, INTEGRATED TOOLCARRIERS, LANDFILL COMPACTORS, AND SOIL COMPACTORS
PRODUCT SUPPORT PROGRAM FOR UPDATING SOFTWARE ON CERTAIN WHEEL LOADERS, WHEEL DOZERS, INTEGRATED TOOLCARRIERS, LANDFILL COMPACTORS, AND SOIL COMPACTORS

Service Letter-Americas

PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE ON CERTAIN 950F, 950G, 950H, 950K, 960F, 962G, 962H, 962H, 962K, 966E, 966F, 966G, 966H, 966H, 966K, 970F, 972G, 972H, 972K, 980C, 980F, 980G, 980H, AND 980K WHEEL LOADERS, IT62G, AND IT62H�INTEGRATED TOOLCARRIERS
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE ON CERTAIN 950F, 950G, 950H, 950K, 960F, 962G, 962H, 962H, 962K, 966E, 966F, 966G, 966H, 966H, 966K, 970F, 972G, 972H, 972K, 980C, 980F, 980G, 980H, AND 980K WHEEL LOADERS, IT62G, AND IT62H�INTEGRATED TOOLCARRIERS

PRODUCT SUPPORT PROGRAM FOR UPDATING SOFTWARE ON CERTAIN WHEEL LOADERS, WHEEL DOZERS, INTEGRATED TOOLCARRIERS, LANDFILL COMPACTORS, AND SOIL COMPACTORS
PRODUCT SUPPORT PROGRAM FOR UPDATING SOFTWARE ON CERTAIN WHEEL LOADERS, WHEEL DOZERS, INTEGRATED TOOLCARRIERS, LANDFILL COMPACTORS, AND SOIL COMPACTORS

Service Letter-China

PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE ON CERTAIN 950F, 950G, 950H, 950K, 960F, 962G, 962H, 962H, 962K, 966E, 966F, 966G, 966H, 966H, 966K, 970F, 972G, 972H, 972K, 980C, 980F, 980G, 980H, AND 980K WHEEL LOADERS, IT62G, AND IT62H�INTEGRATED TOOLCARRIERS
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE ON CERTAIN 950F, 950G, 950H, 950K, 960F, 962G, 962H, 962H, 962K, 966E, 966F, 966G, 966H, 966H, 966K, 970F, 972G, 972H, 972K, 980C, 980F, 980G, 980H, AND 980K WHEEL LOADERS, IT62G, AND IT62H�INTEGRATED TOOLCARRIERS

PRODUCT SUPPORT PROGRAM FOR UPDATING SOFTWARE ON CERTAIN WHEEL LOADERS, WHEEL DOZERS, INTEGRATED TOOLCARRIERS, LANDFILL COMPACTORS, AND SOIL COMPACTORS
PRODUCT SUPPORT PROGRAM FOR UPDATING SOFTWARE ON CERTAIN WHEEL LOADERS, WHEEL DOZERS, INTEGRATED TOOLCARRIERS, LANDFILL COMPACTORS, AND SOIL COMPACTORS

Service Letter-Asia

PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE ON CERTAIN 950F, 950G, 950H, 950K, 960F, 962G, 962H, 962H, 962K, 966E, 966F, 966G, 966H, 966H, 966K, 970F, 972G, 972H, 972K, 980C, 980F, 980G, 980H, AND 980K WHEEL LOADERS, IT62G, AND IT62H�INTEGRATED TOOLCARRIERS
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE ON CERTAIN 950F, 950G, 950H, 950K, 960F, 962G, 962H, 962H, 962K, 966E, 966F, 966G, 966H, 966H, 966K, 970F, 972G, 972H, 972K, 980C, 980F, 980G, 980H, AND 980K WHEEL LOADERS, IT62G, AND IT62H�INTEGRATED TOOLCARRIERS

PRODUCT SUPPORT PROGRAM FOR UPDATING SOFTWARE ON CERTAIN WHEEL LOADERS, WHEEL DOZERS, INTEGRATED TOOLCARRIERS, LANDFILL COMPACTORS, AND SOIL COMPACTORS
PRODUCT SUPPORT PROGRAM FOR UPDATING SOFTWARE ON CERTAIN WHEEL LOADERS, WHEEL DOZERS, INTEGRATED TOOLCARRIERS, LANDFILL COMPACTORS, AND SOIL COMPACTORS

Systems Operation

Electronic Control Module
950H Wheel Loader and 962H
Wheel Loader Electrohydraulic System

Service Letter-APD

PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE ON CERTAIN 950F, 950G, 950H, 950K, 960F, 962G, 962H, 962H, 962K, 966E, 966F, 966G, 966H, 966H, 966K, 970F, 972G, 972H, 972K, 980C, 980F, 980G, 980H, AND 980K WHEEL LOADERS, IT62G, AND IT62H�INTEGRATED TOOLCARRIERS
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE ON CERTAIN 950F, 950G, 950H, 950K, 960F, 962G, 962H, 962H, 962K, 966E, 966F, 966G, 966H, 966H, 966K, 970F, 972G, 972H, 972K, 980C, 980F, 980G, 980H, AND 980K WHEEL LOADERS, IT62G, AND IT62H�INTEGRATED TOOLCARRIERS

PRODUCT SUPPORT PROGRAM FOR UPDATING SOFTWARE ON CERTAIN WHEEL LOADERS, WHEEL DOZERS, INTEGRATED TOOLCARRIERS, LANDFILL COMPACTORS, AND SOIL COMPACTORS
PRODUCT SUPPORT PROGRAM FOR UPDATING SOFTWARE ON CERTAIN WHEEL LOADERS, WHEEL DOZERS, INTEGRATED TOOLCARRIERS, LANDFILL COMPACTORS, AND SOIL COMPACTORS

Troubleshooting

ECM Will Not Communicate with Other Systems or Display Modules
C7 Engines for IT62H Integrated Toolcarrier and for 950H and 962H Wheel Loaders

Self-Diagnostics
C7 and C9 Engines for Caterpillar Built Machines

Electronic Service Tool Will Not Communicate with ECM
C7 and C9 Engines for Caterpillar Built Machines

Programming Parameters
C7 Engines for IT62H Integrated Toolcarrier and for 950H and 962H Wheel Loaders

Test ECM Mode
C7 and C9 Engines for Caterpillar Built Machines

CID 0268 FMI 02 Check Programmable Parameters
C7 and C9 Engines for Caterpillar Built Machines

ECM Will Not Communicate with Other Systems or Display Modules
C7 Engines for IT62H Integrated Toolcarrier and for 950H and 962H Wheel Loaders

Cat Data Link Circuit - Test
C7 and C9 Engines for Caterpillar Built Machines

CID 0253 FMI 02 Personality Module mismatch
C7 Engines for IT62H Integrated Toolcarrier and for 950H and 962H Wheel Loaders

User Defined Shutdown Input Circuit - Test
C7 Engines for IT62H Integrated Toolcarrier and for 950H and 962H Wheel Loaders

Flash Programming
C7 and C9 Engines for Caterpillar Built Machines

Diagnostic Codes
C7 Engines for IT62H Integrated Toolcarrier and for 950H and 962H Wheel Loaders

Replacing the ECM
C7 and C9 Engines for Caterpillar Built Machines

System Overview
C7 Engines for IT62H Integrated Toolcarrier and for 950H and 962H Wheel Loaders

ECM Will Not Accept Factory Passwords
C7 and C9 Engines for Caterpillar Built Machines

Event Codes
C7 Engines for IT62H Integrated Toolcarrier and for 950H and 962H Wheel Loaders

System Configuration Parameters
C7 Engines for IT62H Integrated Toolcarrier and for 950H and 962H Wheel Loaders

Event Codes
C7 Engines for IT62H Integrated Toolcarrier and for 950H and 962H Wheel Loaders

System Configuration Parameters
C7 Engines for IT62H Integrated Toolcarrier and for 950H and 962H Wheel Loaders

Cat Data Link Circuit - Test
C7 Engines for IT62H Integrated Toolcarrier and for 950H and 962H Wheel Loaders

Disassembly and Assembly

Speed/Timing Sensor - Remove and Install
C7
Engines for Caterpillar Built Machines

Electronic Control Module - Remove and Install
C7
Engines for Caterpillar Built Machines

Service Magazine

Auto Clearing of Diagnostics and Events from Electronic Control Module (ECM) {1901, 1920, 7610, 7620}
2014/01/27

New Software Is Used on Certain Tier 3 Machine Engines {1901, 1920, 7620}
2015/02/19

Updated Flash Procedure for All Caterpillar Products {1920, 7610, 7620}
2014/09/16

New Software Is Now Used on Certain Cat® Products {1920, 7620}
2013/11/18

New Machine Software for Cat® Product Link Is Now Available on Certain Cat® Products {7490, 7606, 7610, 7620}
New Machine Software for Cat^® Product Link Is Now Available on Certain Cat^® Products {7490, 7606, 7610, 7620}

Operation and Maintenance Manual

Welding on Machines and Engines with Electronic Controls
950H and 962H Wheel Loaders

Service Brake Control
950H and 962H Wheel Loaders

Autoshift Control
950H and 962H Wheel Loaders

Special Instruction

Diagnostic Code Information for Caterpillar ® Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Diagnostic Code Information for Caterpillar ^® Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}

Service Letter-NACD

PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE ON CERTAIN 950F, 950G, 950H, 950K, 960F, 962G, 962H, 962H, 962K, 966E, 966F, 966G, 966H, 966H, 966K, 970F, 972G, 972H, 972K, 980C, 980F, 980G, 980H, AND 980K WHEEL LOADERS, IT62G, AND IT62H�INTEGRATED TOOLCARRIERS
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE ON CERTAIN 950F, 950G, 950H, 950K, 960F, 962G, 962H, 962H, 962K, 966E, 966F, 966G, 966H, 966H, 966K, 970F, 972G, 972H, 972K, 980C, 980F, 980G, 980H, AND 980K WHEEL LOADERS, IT62G, AND IT62H�INTEGRATED TOOLCARRIERS

PRODUCT SUPPORT PROGRAM FOR UPDATING SOFTWARE ON CERTAIN WHEEL LOADERS, WHEEL DOZERS, INTEGRATED TOOLCARRIERS, LANDFILL COMPACTORS, AND SOIL COMPACTORS
PRODUCT SUPPORT PROGRAM FOR UPDATING SOFTWARE ON CERTAIN WHEEL LOADERS, WHEEL DOZERS, INTEGRATED TOOLCARRIERS, LANDFILL COMPACTORS, AND SOIL COMPACTORS

Service Letter-Australia

PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE ON CERTAIN 950F, 950G, 950H, 950K, 960F, 962G, 962H, 962H, 962K, 966E, 966F, 966G, 966H, 966H, 966K, 970F, 972G, 972H, 972K, 980C, 980F, 980G, 980H, AND 980K WHEEL LOADERS, IT62G, AND IT62H�INTEGRATED TOOLCARRIERS
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE ON CERTAIN 950F, 950G, 950H, 950K, 960F, 962G, 962H, 962H, 962K, 966E, 966F, 966G, 966H, 966H, 966K, 970F, 972G, 972H, 972K, 980C, 980F, 980G, 980H, AND 980K WHEEL LOADERS, IT62G, AND IT62H�INTEGRATED TOOLCARRIERS

PRODUCT SUPPORT PROGRAM FOR UPDATING SOFTWARE ON CERTAIN WHEEL LOADERS, WHEEL DOZERS, INTEGRATED TOOLCARRIERS, LANDFILL COMPACTORS, AND SOIL COMPACTORS
PRODUCT SUPPORT PROGRAM FOR UPDATING SOFTWARE ON CERTAIN WHEEL LOADERS, WHEEL DOZERS, INTEGRATED TOOLCARRIERS, LANDFILL COMPACTORS, AND SOIL COMPACTORS

Service Letter-CFEL

PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE ON CERTAIN 950F, 950G, 950H, 950K, 960F, 962G, 962H, 962H, 962K, 966E, 966F, 966G, 966H, 966H, 966K, 970F, 972G, 972H, 972K, 980C, 980F, 980G, 980H, AND 980K WHEEL LOADERS, IT62G, AND IT62H�INTEGRATED TOOLCARRIERS
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE ON CERTAIN 950F, 950G, 950H, 950K, 960F, 962G, 962H, 962H, 962K, 966E, 966F, 966G, 966H, 966H, 966K, 970F, 972G, 972H, 972K, 980C, 980F, 980G, 980H, AND 980K WHEEL LOADERS, IT62G, AND IT62H�INTEGRATED TOOLCARRIERS

PRODUCT SUPPORT PROGRAM FOR UPDATING SOFTWARE ON CERTAIN WHEEL LOADERS, WHEEL DOZERS, INTEGRATED TOOLCARRIERS, LANDFILL COMPACTORS, AND SOIL COMPACTORS
PRODUCT SUPPORT PROGRAM FOR UPDATING SOFTWARE ON CERTAIN WHEEL LOADERS, WHEEL DOZERS, INTEGRATED TOOLCARRIERS, LANDFILL COMPACTORS, AND SOIL COMPACTORS

Service Letter-CSARL

PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE ON CERTAIN 950F, 950G, 950H, 950K, 960F, 962G, 962H, 962H, 962K, 966E, 966F, 966G, 966H, 966H, 966K, 970F, 972G, 972H, 972K, 980C, 980F, 980G, 980H, AND 980K WHEEL LOADERS, IT62G, AND IT62H�INTEGRATED TOOLCARRIERS
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE ON CERTAIN 950F, 950G, 950H, 950K, 960F, 962G, 962H, 962H, 962K, 966E, 966F, 966G, 966H, 966H, 966K, 970F, 972G, 972H, 972K, 980C, 980F, 980G, 980H, AND 980K WHEEL LOADERS, IT62G, AND IT62H�INTEGRATED TOOLCARRIERS

PRODUCT SUPPORT PROGRAM FOR UPDATING SOFTWARE ON CERTAIN WHEEL LOADERS, WHEEL DOZERS, INTEGRATED TOOLCARRIERS, LANDFILL COMPACTORS, AND SOIL COMPACTORS
PRODUCT SUPPORT PROGRAM FOR UPDATING SOFTWARE ON CERTAIN WHEEL LOADERS, WHEEL DOZERS, INTEGRATED TOOLCARRIERS, LANDFILL COMPACTORS, AND SOIL COMPACTORS

Service Letter-Americas

PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE ON CERTAIN 950F, 950G, 950H, 950K, 960F, 962G, 962H, 962H, 962K, 966E, 966F, 966G, 966H, 966H, 966K, 970F, 972G, 972H, 972K, 980C, 980F, 980G, 980H, AND 980K WHEEL LOADERS, IT62G, AND IT62H�INTEGRATED TOOLCARRIERS
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE ON CERTAIN 950F, 950G, 950H, 950K, 960F, 962G, 962H, 962H, 962K, 966E, 966F, 966G, 966H, 966H, 966K, 970F, 972G, 972H, 972K, 980C, 980F, 980G, 980H, AND 980K WHEEL LOADERS, IT62G, AND IT62H�INTEGRATED TOOLCARRIERS

PRODUCT SUPPORT PROGRAM FOR UPDATING SOFTWARE ON CERTAIN WHEEL LOADERS, WHEEL DOZERS, INTEGRATED TOOLCARRIERS, LANDFILL COMPACTORS, AND SOIL COMPACTORS
PRODUCT SUPPORT PROGRAM FOR UPDATING SOFTWARE ON CERTAIN WHEEL LOADERS, WHEEL DOZERS, INTEGRATED TOOLCARRIERS, LANDFILL COMPACTORS, AND SOIL COMPACTORS

Technical Information Bulletin

Certain 950H- 980H Medium Wheel Loaders May Experience CID 296 - FMI 14 Transmission Control : Special Instruction Faults {7490, 7610, 7620}
Certain 950H- 980H Medium Wheel Loaders May Experience CID 296 - FMI 14 Transmission Control : Special Instruction Faults {7490, 7610, 7620}

Service Letter-China

PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE ON CERTAIN 950F, 950G, 950H, 950K, 960F, 962G, 962H, 962H, 962K, 966E, 966F, 966G, 966H, 966H, 966K, 970F, 972G, 972H, 972K, 980C, 980F, 980G, 980H, AND 980K WHEEL LOADERS, IT62G, AND IT62H�INTEGRATED TOOLCARRIERS
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE ON CERTAIN 950F, 950G, 950H, 950K, 960F, 962G, 962H, 962H, 962K, 966E, 966F, 966G, 966H, 966H, 966K, 970F, 972G, 972H, 972K, 980C, 980F, 980G, 980H, AND 980K WHEEL LOADERS, IT62G, AND IT62H�INTEGRATED TOOLCARRIERS

PRODUCT SUPPORT PROGRAM FOR UPDATING SOFTWARE ON CERTAIN WHEEL LOADERS, WHEEL DOZERS, INTEGRATED TOOLCARRIERS, LANDFILL COMPACTORS, AND SOIL COMPACTORS
PRODUCT SUPPORT PROGRAM FOR UPDATING SOFTWARE ON CERTAIN WHEEL LOADERS, WHEEL DOZERS, INTEGRATED TOOLCARRIERS, LANDFILL COMPACTORS, AND SOIL COMPACTORS

Service Letter-Asia

PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE ON CERTAIN 950F, 950G, 950H, 950K, 960F, 962G, 962H, 962H, 962K, 966E, 966F, 966G, 966H, 966H, 966K, 970F, 972G, 972H, 972K, 980C, 980F, 980G, 980H, AND 980K WHEEL LOADERS, IT62G, AND IT62H�INTEGRATED TOOLCARRIERS
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE ON CERTAIN 950F, 950G, 950H, 950K, 960F, 962G, 962H, 962H, 962K, 966E, 966F, 966G, 966H, 966H, 966K, 970F, 972G, 972H, 972K, 980C, 980F, 980G, 980H, AND 980K WHEEL LOADERS, IT62G, AND IT62H�INTEGRATED TOOLCARRIERS

PRODUCT SUPPORT PROGRAM FOR UPDATING SOFTWARE ON CERTAIN WHEEL LOADERS, WHEEL DOZERS, INTEGRATED TOOLCARRIERS, LANDFILL COMPACTORS, AND SOIL COMPACTORS
PRODUCT SUPPORT PROGRAM FOR UPDATING SOFTWARE ON CERTAIN WHEEL LOADERS, WHEEL DOZERS, INTEGRATED TOOLCARRIERS, LANDFILL COMPACTORS, AND SOIL COMPACTORS

Systems Operation

Ground Speed Limiter
950H Wheel Loader and 962H
Wheel Loader Power Train

General Information
950H Wheel Loader and 962H
Wheel Loader Power Train

Power Train Electronic Control System
950H Wheel Loader and 962H
Wheel Loader Power Train

Autoshift Control
950H Wheel Loader and 962H
Wheel Loader Power Train

Electronic Control Module (Power Train)
950H Wheel Loader and 962H
Wheel Loader Power Train

Cat Data Link
950H Wheel Loader and 962H
Wheel Loader Power Train

Integrated Braking System
950H Wheel Loader and 962H
Wheel Loader Power Train

Electronic Control Module
950H Wheel Loader and 962H
Wheel Loader Electrohydraulic System

Data Link
950H Wheel Loader and 962H
Wheel Loader Electrohydraulic System

General Information
Machine Security System (MSS3i) Integrated

System Overview
Machine Security System (MSS3i) Integrated

Operation of Status Indicator
Machine Security System (MSS3i) Integrated

Key Information
Machine Security System (MSS3i) Integrated

Scheduled Access - "Security System Bypass Times"
Machine Security System (MSS3i) Integrated

Diagnostic Operation
Machine Security System (MSS3i) Integrated

Protected Functions
Machine Security System (MSS3i) Integrated

Service Operation Using Service Tool
Machine Security System (MSS3i) Integrated

Electronic Control Module (ECM)
Machine Security System (MSS3i) Integrated

System Components
Machine Security System (MSS3i) Integrated

Data Link
Machine Security System (MSS3i) Integrated

Normal Operation
Machine Security System (MSS3i) Integrated

Service Letter-APD

PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE ON CERTAIN 950F, 950G, 950H, 950K, 960F, 962G, 962H, 962H, 962K, 966E, 966F, 966G, 966H, 966H, 966K, 970F, 972G, 972H, 972K, 980C, 980F, 980G, 980H, AND 980K WHEEL LOADERS, IT62G, AND IT62H�INTEGRATED TOOLCARRIERS
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE ON CERTAIN 950F, 950G, 950H, 950K, 960F, 962G, 962H, 962H, 962K, 966E, 966F, 966G, 966H, 966H, 966K, 970F, 972G, 972H, 972K, 980C, 980F, 980G, 980H, AND 980K WHEEL LOADERS, IT62G, AND IT62H�INTEGRATED TOOLCARRIERS

PRODUCT SUPPORT PROGRAM FOR UPDATING SOFTWARE ON CERTAIN WHEEL LOADERS, WHEEL DOZERS, INTEGRATED TOOLCARRIERS, LANDFILL COMPACTORS, AND SOIL COMPACTORS
PRODUCT SUPPORT PROGRAM FOR UPDATING SOFTWARE ON CERTAIN WHEEL LOADERS, WHEEL DOZERS, INTEGRATED TOOLCARRIERS, LANDFILL COMPACTORS, AND SOIL COMPACTORS

Testing and Adjusting

Electronic Control Module (ECM) - Flash Program
950H Wheel Loader and 962H
Wheel Loader Power Train

Electronic Control Module (ECM) - Replace
950H Wheel Loader and 962H
Wheel Loader Power Train

Electronic Control Module (ECM) - Configure
950H Wheel Loader and 962H
Wheel Loader Power Train

Transmission Speed for Forward Directional Shift - Program
950H Wheel Loader and 962H
Wheel Loader Power Train

Transmission Speed for Reverse Directional Shift - Program
950H Wheel Loader and 962H
Wheel Loader Power Train

Calibration and Programming
950H Wheel Loader and 962H
Wheel Loader Power Train

Forward High Speed Lockout - Program
950H Wheel Loader and 962H
Wheel Loader Power Train

Reverse High Speed Lockout - Program
950H Wheel Loader and 962H
Wheel Loader Power Train

Ride Control Configuration - Program
950H Wheel Loader and 962H
Wheel Loader Power Train

Secondary Steering - Program
950H Wheel Loader and 962H
Wheel Loader Power Train

Ride Control Pressure Equalization Time - Adjust
950H Wheel Loader and 962H
Wheel Loader Electrohydraulic System

General Information
Machine Security System (MSS3i) Integrated

Troubleshooting
Machine Security System (MSS3i) Integrated

Key - Program
Machine Security System (MSS3i) Integrated

Scheduled Access - Program - Security System Bypass
Machine Security System (MSS3i) Integrated

Time - Set
Machine Security System (MSS3i) Integrated

Factory Password - Obtain
Machine Security System (MSS3i) Integrated

Configuration
Machine Security System (MSS3i) Integrated

Machine Security System - Uninstall
Machine Security System (MSS3i) Integrated

Glossary of Terms
Machine Security System (MSS3i) Integrated

Troubleshooting

General Information
950H Wheel Loader and 962H
Wheel Loader Power Train

Service Tools
950H Wheel Loader and 962H
Wheel Loader Power Train

Diagnostic Capabilities
950H Wheel Loader and 962H
Wheel Loader Power Train

ECM Location Code - Test
950H Wheel Loader and 962H
Wheel Loader Power Train

Service Magazine

Auto Clearing of Diagnostics and Events from Electronic Control Module (ECM) {1901, 1920, 7610, 7620}
2014/01/27

Updated Flash Procedure for All Caterpillar Products {1920, 7610, 7620}
2014/09/16

New Software Is Now Used on Certain Cat® Products {1920, 7620}
2013/11/18

A New Power Train Software Group Is Now Used on Certain 950H and 962H Wheel Loaders {4800, 4808, 7610, 7620}
2014/04/07

New Power Train Software and Monitor Software are now Used on Certain Wheel Loaders {4800, 4808, 7490, 7610, 7620}
2015/04/30

New Software Is Now Used on Certain H Series Medium Wheel Loaders {4800, 4808, 7490, 7610, 7620}
New Software Is Now Used on Certain H Series Medium Wheel Loaders {4800, 4808, 7490, 7610, 7620}

Systems Operation

Electronic Control Module
950H Wheel Loader and 962H
Wheel Loader Electrohydraulic System

Data Link
950H Wheel Loader and 962H
Wheel Loader Electrohydraulic System

Operation and Maintenance Manual

Welding on Machines and Engines with Electronic Controls
950H and 962H Wheel Loaders

Aggregate Autodig - If Equipped
950H and 962H Wheel Loaders

Special Instruction

Installation of 446-1925 Joystick Control Kit for 950H, 962H, 966H, and 972H Wheel Loaders{1408, 5702, 5705, 7610, 7620}
Installation of 446-1925 Joystick Control Kit for 950H, 962H, 966H, and 972H Wheel Loaders{1408, 5702, 5705, 7610, 7620}

Diagnostic Code Information for Caterpillar ® Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Diagnostic Code Information for Caterpillar ^® Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}

Procedure to Install 3 - Function Lever Control on Certain H Series Medium Wheel Loaders {1408, 5063, 5702, 5705, 7332, 7610}
Procedure to Install 3 - Function Lever Control on Certain H Series Medium Wheel Loaders {1408, 5063, 5702, 5705, 7332, 7610}

Service Letter-NACD

PRODUCT SUPPORT PROGRAM FOR UPDATING SOFTWARE ON CERTAIN WHEEL LOADERS, WHEEL DOZERS, INTEGRATED TOOLCARRIERS, LANDFILL COMPACTORS, AND SOIL COMPACTORS
PRODUCT SUPPORT PROGRAM FOR UPDATING SOFTWARE ON CERTAIN WHEEL LOADERS, WHEEL DOZERS, INTEGRATED TOOLCARRIERS, LANDFILL COMPACTORS, AND SOIL COMPACTORS

Service Letter-Australia

Service Letter-CFEL

Service Letter-CSARL

Service Letter-Americas

Service Letter-China

Service Letter-Asia

Systems Operation

Aggregate Autodig
950H Wheel Loader and 962H
Wheel Loader Electrohydraulic System

Implement Electronic Control System
950H Wheel Loader and 962H
Wheel Loader Electrohydraulic System

Electronic Control Module
950H Wheel Loader and 962H
Wheel Loader Electrohydraulic System

Data Link
950H Wheel Loader and 962H
Wheel Loader Electrohydraulic System

Service Letter-APD

PRODUCT SUPPORT PROGRAM FOR UPDATING SOFTWARE ON CERTAIN WHEEL LOADERS, WHEEL DOZERS, INTEGRATED TOOLCARRIERS, LANDFILL COMPACTORS, AND SOIL COMPACTORS
PRODUCT SUPPORT PROGRAM FOR UPDATING SOFTWARE ON CERTAIN WHEEL LOADERS, WHEEL DOZERS, INTEGRATED TOOLCARRIERS, LANDFILL COMPACTORS, AND SOIL COMPACTORS

Testing and Adjusting

Electronic Control Module (ECM) - Flash Program
950H Wheel Loader and 962H
Wheel Loader Electrohydraulic System

Electronic Control Module (ECM) - Replace
950H Wheel Loader and 962H
Wheel Loader Electrohydraulic System

Implement Hydraulic Service Mode
950H Wheel Loader and 962H
Wheel Loader Electrohydraulic System

Electronic Control Module (ECM) - Configure
950H Wheel Loader and 962H
Wheel Loader Electrohydraulic System

Troubleshooting

General Information
950H Wheel Loader and 962H
Wheel Loader Electrohydraulic System

Service Tools
950H Wheel Loader and 962H
Wheel Loader Electrohydraulic System

ECM Location Code - Test
950H Wheel Loader and 962H
Wheel Loader Electrohydraulic System

Diagnostic Capabilities
950H Wheel Loader and 962H
Wheel Loader Electrohydraulic System

Service Magazine

Auto Clearing of Diagnostics and Events from Electronic Control Module (ECM) {1901, 1920, 7610, 7620}
2014/01/27

Updated Flash Procedure for All Caterpillar Products {1920, 7610, 7620}
2014/09/16

New Software Is Now Used on Certain Cat® Products {1920, 7620}
2013/11/18

New Implement Software Is Now Used on Certain 950H and 962H Wheel Loaders {5063, 5701, 6000, 7490, 7610, 7620}
New Implement Software Is Now Used on Certain 950H and 962H Wheel Loaders {5063, 5701, 6000, 7490, 7610, 7620}

Engine News

New CAT Inspect Form Available for EMCP Troubleshooting and Inspection {0374, 4490, 7451, 7620}
New CAT Inspect Form Available for EMCP Troubleshooting and Inspection {0374, 4490, 7451, 7620}

Operation and Maintenance Manual

Welding on Machines and Engines with Electronic Controls
950H and 962H Wheel Loaders

Special Instruction

Installation of the Machine Security System (MSS) Universal Attachment Kit {7631, 7631}
Installation of the Machine Security System (MSS) Universal Attachment Kit {7631, 7631}

Installation of 446-1925 Joystick Control Kit for 950H, 962H, 966H, and 972H Wheel Loaders{1408, 5702, 5705, 7610, 7620}
Installation of 446-1925 Joystick Control Kit for 950H, 962H, 966H, and 972H Wheel Loaders{1408, 5702, 5705, 7610, 7620}

Diagnostic Code Information for Caterpillar ® Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Diagnostic Code Information for Caterpillar ^® Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}

Installation Instructions for the 447-0500 Secondary Steering Gp {0679, 1408, 4304, 4324, 4334, 4339, 7610, 7620}
Installation Instructions for the 447-0500 Secondary Steering Gp {0679, 1408, 4304, 4324, 4334, 4339, 7610, 7620}

Procedure to Install Printer Kit in the Cab on Certain Medium Wheel Loaders {1408, 7490, 7494, 749P, 7610, 7620}
Procedure to Install Printer Kit in the Cab on Certain Medium Wheel Loaders {1408, 7490, 7494, 749P, 7610, 7620}

Procedure to Install 3 - Function Lever Control on Certain H Series Medium Wheel Loaders {1408, 5063, 5702, 5705, 7332, 7610}
Procedure to Install 3 - Function Lever Control on Certain H Series Medium Wheel Loaders {1408, 5063, 5702, 5705, 7332, 7610}

Procedure to Install Cat Production Measurement (CPM) Kit On Certain Series H Medium Wheel Loaders {1408, 7000, 7490, 7606}
Procedure to Install Cat Production Measurement (CPM) Kit On Certain Series H Medium Wheel Loaders {1408, 7000, 7490, 7606}

Service Letter-NACD

PRODUCT SUPPORT PROGRAM FOR REPLACING CELLULAR PRODUCT LINK DEVICES ON CERTAIN WHEEL LOADERS, AND LANDFILL COMPACTORS AND LANDFILL DOZERS
PRODUCT SUPPORT PROGRAM FOR REPLACING CELLULAR PRODUCT LINK DEVICES ON CERTAIN WHEEL LOADERS, AND LANDFILL COMPACTORS AND LANDFILL DOZERS

PRODUCT SUPPORT PROGRAM FOR UPDATING SOFTWARE ON CERTAIN WHEEL LOADERS, WHEEL DOZERS, INTEGRATED TOOLCARRIERS, LANDFILL COMPACTORS, AND SOIL COMPACTORS
PRODUCT SUPPORT PROGRAM FOR UPDATING SOFTWARE ON CERTAIN WHEEL LOADERS, WHEEL DOZERS, INTEGRATED TOOLCARRIERS, LANDFILL COMPACTORS, AND SOIL COMPACTORS

PRODUCT SUPPORT PROGRAM FOR INSTALLING PRODUCT LINK PL[E]631 SATELLITE OR PL[E]641 CELLULAR RADIO SYSTEMS ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR INSTALLING PRODUCT LINK PL[E]631 SATELLITE OR PL[E]641 CELLULAR RADIO SYSTEMS ON CERTAIN CATERPILLAR PRODUCTS

PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE ON CERTAIN INTEGRATED TOOLCARRIERS AND WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE ON CERTAIN INTEGRATED TOOLCARRIERS AND WHEEL LOADERS

Service Letter-Australia

PRODUCT SUPPORT PROGRAM FOR UPDATING SOFTWARE ON CERTAIN WHEEL LOADERS, WHEEL DOZERS, INTEGRATED TOOLCARRIERS, LANDFILL COMPACTORS, AND SOIL COMPACTORS
PRODUCT SUPPORT PROGRAM FOR UPDATING SOFTWARE ON CERTAIN WHEEL LOADERS, WHEEL DOZERS, INTEGRATED TOOLCARRIERS, LANDFILL COMPACTORS, AND SOIL COMPACTORS

PRODUCT SUPPORT PROGRAM FOR INSTALLING PRODUCT LINK PL[E]631 SATELLITE OR PL[E]641 CELLULAR RADIO SYSTEMS ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR INSTALLING PRODUCT LINK PL[E]631 SATELLITE OR PL[E]641 CELLULAR RADIO SYSTEMS ON CERTAIN CATERPILLAR PRODUCTS

PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE ON CERTAIN INTEGRATED TOOLCARRIERS AND WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE ON CERTAIN INTEGRATED TOOLCARRIERS AND WHEEL LOADERS

Service Letter-CFEL

PRODUCT SUPPORT PROGRAM FOR UPDATING SOFTWARE ON CERTAIN WHEEL LOADERS, WHEEL DOZERS, INTEGRATED TOOLCARRIERS, LANDFILL COMPACTORS, AND SOIL COMPACTORS
PRODUCT SUPPORT PROGRAM FOR UPDATING SOFTWARE ON CERTAIN WHEEL LOADERS, WHEEL DOZERS, INTEGRATED TOOLCARRIERS, LANDFILL COMPACTORS, AND SOIL COMPACTORS

PRODUCT SUPPORT PROGRAM FOR INSTALLING PRODUCT LINK PL[E]631 SATELLITE OR PL[E]641 CELLULAR RADIO SYSTEMS ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR INSTALLING PRODUCT LINK PL[E]631 SATELLITE OR PL[E]641 CELLULAR RADIO SYSTEMS ON CERTAIN CATERPILLAR PRODUCTS

PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE ON CERTAIN INTEGRATED TOOLCARRIERS AND WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE ON CERTAIN INTEGRATED TOOLCARRIERS AND WHEEL LOADERS

Service Letter-CSARL

PRODUCT SUPPORT PROGRAM FOR REPLACING CELLULAR PRODUCT LINK DEVICES ON CERTAIN WHEEL LOADERS, AND LANDFILL COMPACTORS AND LANDFILL DOZERS
PRODUCT SUPPORT PROGRAM FOR REPLACING CELLULAR PRODUCT LINK DEVICES ON CERTAIN WHEEL LOADERS, AND LANDFILL COMPACTORS AND LANDFILL DOZERS

PRODUCT SUPPORT PROGRAM FOR UPDATING SOFTWARE ON CERTAIN WHEEL LOADERS, WHEEL DOZERS, INTEGRATED TOOLCARRIERS, LANDFILL COMPACTORS, AND SOIL COMPACTORS
PRODUCT SUPPORT PROGRAM FOR UPDATING SOFTWARE ON CERTAIN WHEEL LOADERS, WHEEL DOZERS, INTEGRATED TOOLCARRIERS, LANDFILL COMPACTORS, AND SOIL COMPACTORS

PRODUCT SUPPORT PROGRAM FOR INSTALLING PRODUCT LINK PL[E]631 SATELLITE OR PL[E]641 CELLULAR RADIO SYSTEMS ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR INSTALLING PRODUCT LINK PL[E]631 SATELLITE OR PL[E]641 CELLULAR RADIO SYSTEMS ON CERTAIN CATERPILLAR PRODUCTS

PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE ON CERTAIN INTEGRATED TOOLCARRIERS AND WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE ON CERTAIN INTEGRATED TOOLCARRIERS AND WHEEL LOADERS

Service Letter-Americas

PRODUCT SUPPORT PROGRAM FOR REPLACING CELLULAR PRODUCT LINK DEVICES ON CERTAIN WHEEL LOADERS, AND LANDFILL COMPACTORS AND LANDFILL DOZERS
PRODUCT SUPPORT PROGRAM FOR REPLACING CELLULAR PRODUCT LINK DEVICES ON CERTAIN WHEEL LOADERS, AND LANDFILL COMPACTORS AND LANDFILL DOZERS

PRODUCT SUPPORT PROGRAM FOR UPDATING SOFTWARE ON CERTAIN WHEEL LOADERS, WHEEL DOZERS, INTEGRATED TOOLCARRIERS, LANDFILL COMPACTORS, AND SOIL COMPACTORS
PRODUCT SUPPORT PROGRAM FOR UPDATING SOFTWARE ON CERTAIN WHEEL LOADERS, WHEEL DOZERS, INTEGRATED TOOLCARRIERS, LANDFILL COMPACTORS, AND SOIL COMPACTORS

PRODUCT SUPPORT PROGRAM FOR INSTALLING PRODUCT LINK PL[E]631 SATELLITE OR PL[E]641 CELLULAR RADIO SYSTEMS ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR INSTALLING PRODUCT LINK PL[E]631 SATELLITE OR PL[E]641 CELLULAR RADIO SYSTEMS ON CERTAIN CATERPILLAR PRODUCTS

PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE ON CERTAIN INTEGRATED TOOLCARRIERS AND WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE ON CERTAIN INTEGRATED TOOLCARRIERS AND WHEEL LOADERS

Technical Information Bulletin

Certain 950H- 980H Medium Wheel Loaders May Experience CID 296 - FMI 14 Transmission Control : Special Instruction Faults {7490, 7610, 7620}
Certain 950H- 980H Medium Wheel Loaders May Experience CID 296 - FMI 14 Transmission Control : Special Instruction Faults {7490, 7610, 7620}

Service Letter-China

PRODUCT SUPPORT PROGRAM FOR UPDATING SOFTWARE ON CERTAIN WHEEL LOADERS, WHEEL DOZERS, INTEGRATED TOOLCARRIERS, LANDFILL COMPACTORS, AND SOIL COMPACTORS
PRODUCT SUPPORT PROGRAM FOR UPDATING SOFTWARE ON CERTAIN WHEEL LOADERS, WHEEL DOZERS, INTEGRATED TOOLCARRIERS, LANDFILL COMPACTORS, AND SOIL COMPACTORS

PRODUCT SUPPORT PROGRAM FOR INSTALLING PRODUCT LINK PL[E]631 SATELLITE OR PL[E]641 CELLULAR RADIO SYSTEMS ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR INSTALLING PRODUCT LINK PL[E]631 SATELLITE OR PL[E]641 CELLULAR RADIO SYSTEMS ON CERTAIN CATERPILLAR PRODUCTS

PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE ON CERTAIN INTEGRATED TOOLCARRIERS AND WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE ON CERTAIN INTEGRATED TOOLCARRIERS AND WHEEL LOADERS

Service Letter-Asia

PRODUCT SUPPORT PROGRAM FOR UPDATING SOFTWARE ON CERTAIN WHEEL LOADERS, WHEEL DOZERS, INTEGRATED TOOLCARRIERS, LANDFILL COMPACTORS, AND SOIL COMPACTORS
PRODUCT SUPPORT PROGRAM FOR UPDATING SOFTWARE ON CERTAIN WHEEL LOADERS, WHEEL DOZERS, INTEGRATED TOOLCARRIERS, LANDFILL COMPACTORS, AND SOIL COMPACTORS

PRODUCT SUPPORT PROGRAM FOR INSTALLING PRODUCT LINK PL[E]631 SATELLITE OR PL[E]641 CELLULAR RADIO SYSTEMS ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR INSTALLING PRODUCT LINK PL[E]631 SATELLITE OR PL[E]641 CELLULAR RADIO SYSTEMS ON CERTAIN CATERPILLAR PRODUCTS

PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE ON CERTAIN INTEGRATED TOOLCARRIERS AND WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE ON CERTAIN INTEGRATED TOOLCARRIERS AND WHEEL LOADERS

Systems Operation

Operation of Status Indicator
Machine Security System

Protected Functions
Machine Security System

Diagnostic Operation
Machine Security System

Events
Machine Security System

Service Operation Using Machine Security System
Machine Security System

Key Information
Machine Security System

Service Operation Using Service Tool
Machine Security System

Electronic Control Module (ECM)
Machine Security System

System Overview
Machine Security System

Scheduled Access - "Security System Bypass Times"
Machine Security System

General Information
Machine Security System

Normal Operation
Machine Security System

System Components
Machine Security System

Cat Data Link
Machine Security System

Electronic Control Module
950H Wheel Loader and 962H
Wheel Loader Electrohydraulic System

Data Link
950H Wheel Loader and 962H
Wheel Loader Electrohydraulic System

General Information
Machine Security System (MSS3i) Integrated

System Overview
Machine Security System (MSS3i) Integrated

Operation of Status Indicator
Machine Security System (MSS3i) Integrated

Key Information
Machine Security System (MSS3i) Integrated

Scheduled Access - "Security System Bypass Times"
Machine Security System (MSS3i) Integrated

Diagnostic Operation
Machine Security System (MSS3i) Integrated

Protected Functions
Machine Security System (MSS3i) Integrated

Service Operation Using Service Tool
Machine Security System (MSS3i) Integrated

Electronic Control Module (ECM)
Machine Security System (MSS3i) Integrated

System Components
Machine Security System (MSS3i) Integrated

Data Link
Machine Security System (MSS3i) Integrated

Normal Operation
Machine Security System (MSS3i) Integrated

General Information
MSS3s Machine Security System

System Overview
MSS3s Machine Security System

Normal Operation
MSS3s Machine Security System

Operation of Status Indicator
MSS3s Machine Security System

Key Information
MSS3s Machine Security System

Scheduled Access - "Security System Bypass Times"
MSS3s Machine Security System

Diagnostic Operation
MSS3s Machine Security System

Events
MSS3s Machine Security System

Protected Functions
MSS3s Machine Security System

Service Operation Using Machine Security System
MSS3s Machine Security System

Service Operation Using Service Tool
MSS3s Machine Security System

Electronic Control Module (ECM)
MSS3s Machine Security System

System Components
MSS3s Machine Security System

Data Links
MSS3s Machine Security System

Custom Service Information

Field Installation Instructions for the 433-8704 Fan Control Ar on Certain 950H and 962H Wheel Loaders {1350, 1386, 138R, 1408, 5057, 7610, 7620, 7960}
Field Installation Instructions for the 433-8704 Fan Control Ar on Certain 950H and 962H Wheel Loaders {1350, 1386, 138R, 1408, 5057, 7610, 7620, 7960}

Service Letter-APD

PRODUCT SUPPORT PROGRAM FOR UPDATING SOFTWARE ON CERTAIN WHEEL LOADERS, WHEEL DOZERS, INTEGRATED TOOLCARRIERS, LANDFILL COMPACTORS, AND SOIL COMPACTORS
PRODUCT SUPPORT PROGRAM FOR UPDATING SOFTWARE ON CERTAIN WHEEL LOADERS, WHEEL DOZERS, INTEGRATED TOOLCARRIERS, LANDFILL COMPACTORS, AND SOIL COMPACTORS

PRODUCT SUPPORT PROGRAM FOR INSTALLING PRODUCT LINK PL[E]631 SATELLITE OR PL[E]641 CELLULAR RADIO SYSTEMS ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR INSTALLING PRODUCT LINK PL[E]631 SATELLITE OR PL[E]641 CELLULAR RADIO SYSTEMS ON CERTAIN CATERPILLAR PRODUCTS

PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE ON CERTAIN INTEGRATED TOOLCARRIERS AND WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE ON CERTAIN INTEGRATED TOOLCARRIERS AND WHEEL LOADERS

Testing and Adjusting

Glossary of Terms
Machine Security System

Key - Program
Machine Security System

System Disarm - Program - Security System Bypass
Machine Security System

General Information
Machine Security System

Electronic Control Module (ECM) - Replace
Machine Security System

Software - Uninstall - "Immobilizer" Feature
Machine Security System

Time - Set
Machine Security System

Product Identification Number - Program
Machine Security System

Electronic Control Module (ECM) - Flash Program
Machine Security System

Factory Password - Obtain
Machine Security System

General Information
Machine Security System (MSS3i) Integrated

Troubleshooting
Machine Security System (MSS3i) Integrated

Key - Program
Machine Security System (MSS3i) Integrated

Scheduled Access - Program - Security System Bypass
Machine Security System (MSS3i) Integrated

Time - Set
Machine Security System (MSS3i) Integrated

Factory Password - Obtain
Machine Security System (MSS3i) Integrated

Configuration
Machine Security System (MSS3i) Integrated

Machine Security System - Uninstall
Machine Security System (MSS3i) Integrated

Glossary of Terms
Machine Security System (MSS3i) Integrated

General Information
MSS3s Machine Security System

Product Identification Number - Program
MSS3s Machine Security System

Key - Program
MSS3s Machine Security System

System Disarm - Program - Security System Bypass
MSS3s Machine Security System

Factory Password - Obtain
MSS3s Machine Security System

Time - Set
MSS3s Machine Security System

Glossary of Terms
MSS3s Machine Security System

Software - Uninstall - "Immobilizer" Feature
MSS3s Machine Security System

Troubleshooting

Using Caterpillar Electronic Technician to Determine Diagnostic Codes
Machine Security System

Lost Key
Machine Security System

Diagnostic Code List
Machine Security System

General Information
Machine Security System

Engine Does Not Crank and Status Indicator Is Green
Machine Security System

Engine Does Not Start and Status Indicator Is Continuously Red
Machine Security System

MID 124 - CID 0248 - FMI 12
Machine Security System

MID 124 - CID 0817 - FMI 04
Machine Security System

MID 124 - CID 1391 - FMI 03
Machine Security System

MID 124 - CID 1391 - FMI 04
Machine Security System

MID 124 - CID 1392 - FMI 03
Machine Security System

MID 124 - CID 1392 - FMI 04
Machine Security System

CID 1639 FMI 02 Machine Security System incorrect
C7 and C9 Engines for Caterpillar Built Machines

CID 1639 FMI 09 Machine Security System Module not communicating on link
C7 Engines for IT62H Integrated Toolcarrier and for 950H and 962H Wheel Loaders

Lost Key (MSS)
MSS3s Machine Security System

Engine Does Not Crank and Status Indicator Is Green
MSS3s Machine Security System

Engine Does Not Start and Status Indicator Is Continuously Red
MSS3s Machine Security System

ECM Output Driver - Test
MSS3s Machine Security System

ECM Software - Install
MSS3s Machine Security System

ECM - Replace
MSS3s Machine Security System

ECM - Configure
MSS3s Machine Security System

Service Magazine

Auto Clearing of Diagnostics and Events from Electronic Control Module (ECM) {1901, 1920, 7610, 7620}
2014/01/27

Updated Flash Procedure for All Caterpillar Products {1920, 7610, 7620}
2014/09/16

New Software Is Now Used on Certain Cat® Products {1920, 7620}
2013/11/18

A New Autolube Pump and Internal Circuit Board Are Now Available for Certain Wheel Loaders and Articulated Trucks {1408, 7516, 7540, 7610, 7620}
A New Autolube Pump and Internal Circuit Board Are Now Available for Certain Wheel Loaders and Articulated Trucks {1408, 7516, 7540, 7610, 7620}

Military Electronic Technician (Military ET) Is Now Available For Military Personnel {0374, 0376, 0599, 1000, 7000, 7610, 7620}
Military Electronic Technician (Military ET) Is Now Available For Military Personnel {0374, 0376, 0599, 1000, 7000, 7610, 7620}

New Implement Software Is Now Used on Certain 950H and 962H Wheel Loaders {5063, 5701, 6000, 7490, 7610, 7620}
New Implement Software Is Now Used on Certain 950H and 962H Wheel Loaders {5063, 5701, 6000, 7490, 7610, 7620}

New Monitor Software Group Is Now Used on Certain Medium Wheel Loaders {7490, 7494, 7601, 7603, 7610, 7620}
New Monitor Software Group Is Now Used on Certain Medium Wheel Loaders {7490, 7494, 7601, 7603, 7610, 7620}

New Machine Software for Cat® Product Link Is Now Available on Certain Cat® Products {7490, 7606, 7610, 7620}
New Machine Software for Cat^® Product Link Is Now Available on Certain Cat^® Products {7490, 7606, 7610, 7620}

Service Letter-NACD

PRODUCT SUPPORT PROGRAM FOR INSTALLING PRODUCT LINK PL[E]631 SATELLITE OR PL[E]641 CELLULAR RADIO SYSTEMS ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR INSTALLING PRODUCT LINK PL[E]631 SATELLITE OR PL[E]641 CELLULAR RADIO SYSTEMS ON CERTAIN CATERPILLAR PRODUCTS

PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE ON CERTAIN INTEGRATED TOOLCARRIERS AND WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE ON CERTAIN INTEGRATED TOOLCARRIERS AND WHEEL LOADERS

Service Letter-Australia

PRODUCT SUPPORT PROGRAM FOR INSTALLING PRODUCT LINK PL[E]631 SATELLITE OR PL[E]641 CELLULAR RADIO SYSTEMS ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR INSTALLING PRODUCT LINK PL[E]631 SATELLITE OR PL[E]641 CELLULAR RADIO SYSTEMS ON CERTAIN CATERPILLAR PRODUCTS

PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE ON CERTAIN INTEGRATED TOOLCARRIERS AND WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE ON CERTAIN INTEGRATED TOOLCARRIERS AND WHEEL LOADERS

Service Letter-CFEL

PRODUCT SUPPORT PROGRAM FOR INSTALLING PRODUCT LINK PL[E]631 SATELLITE OR PL[E]641 CELLULAR RADIO SYSTEMS ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR INSTALLING PRODUCT LINK PL[E]631 SATELLITE OR PL[E]641 CELLULAR RADIO SYSTEMS ON CERTAIN CATERPILLAR PRODUCTS

PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE ON CERTAIN INTEGRATED TOOLCARRIERS AND WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE ON CERTAIN INTEGRATED TOOLCARRIERS AND WHEEL LOADERS

Service Letter-CSARL

PRODUCT SUPPORT PROGRAM FOR INSTALLING PRODUCT LINK PL[E]631 SATELLITE OR PL[E]641 CELLULAR RADIO SYSTEMS ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR INSTALLING PRODUCT LINK PL[E]631 SATELLITE OR PL[E]641 CELLULAR RADIO SYSTEMS ON CERTAIN CATERPILLAR PRODUCTS

PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE ON CERTAIN INTEGRATED TOOLCARRIERS AND WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE ON CERTAIN INTEGRATED TOOLCARRIERS AND WHEEL LOADERS

Service Letter-Americas

PRODUCT SUPPORT PROGRAM FOR INSTALLING PRODUCT LINK PL[E]631 SATELLITE OR PL[E]641 CELLULAR RADIO SYSTEMS ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR INSTALLING PRODUCT LINK PL[E]631 SATELLITE OR PL[E]641 CELLULAR RADIO SYSTEMS ON CERTAIN CATERPILLAR PRODUCTS

PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE ON CERTAIN INTEGRATED TOOLCARRIERS AND WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE ON CERTAIN INTEGRATED TOOLCARRIERS AND WHEEL LOADERS

Service Letter-China

PRODUCT SUPPORT PROGRAM FOR INSTALLING PRODUCT LINK PL[E]631 SATELLITE OR PL[E]641 CELLULAR RADIO SYSTEMS ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR INSTALLING PRODUCT LINK PL[E]631 SATELLITE OR PL[E]641 CELLULAR RADIO SYSTEMS ON CERTAIN CATERPILLAR PRODUCTS

PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE ON CERTAIN INTEGRATED TOOLCARRIERS AND WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE ON CERTAIN INTEGRATED TOOLCARRIERS AND WHEEL LOADERS

Service Letter-Asia

PRODUCT SUPPORT PROGRAM FOR INSTALLING PRODUCT LINK PL[E]631 SATELLITE OR PL[E]641 CELLULAR RADIO SYSTEMS ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR INSTALLING PRODUCT LINK PL[E]631 SATELLITE OR PL[E]641 CELLULAR RADIO SYSTEMS ON CERTAIN CATERPILLAR PRODUCTS

PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE ON CERTAIN INTEGRATED TOOLCARRIERS AND WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE ON CERTAIN INTEGRATED TOOLCARRIERS AND WHEEL LOADERS

Systems Operation

Electronic Control Module
950H Wheel Loader and 962H
Wheel Loader Electrohydraulic System

Service Letter-APD

PRODUCT SUPPORT PROGRAM FOR INSTALLING PRODUCT LINK PL[E]631 SATELLITE OR PL[E]641 CELLULAR RADIO SYSTEMS ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR INSTALLING PRODUCT LINK PL[E]631 SATELLITE OR PL[E]641 CELLULAR RADIO SYSTEMS ON CERTAIN CATERPILLAR PRODUCTS

PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE ON CERTAIN INTEGRATED TOOLCARRIERS AND WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE ON CERTAIN INTEGRATED TOOLCARRIERS AND WHEEL LOADERS

Testing and Adjusting

Electronic Control Module (ECM) - Replace
Machine Security System

Electronic Control Module (ECM) - Flash Program
Machine Security System

Special Instruction

Cat® VIMS Converter Functionality {7610, 7620}
Cat^® VIMS Converter Functionality {7610, 7620}

2 Wire and 4 Wire Ethernet Repair Procedure on All Cat® Products {1408}
2 Wire and 4 Wire Ethernet Repair Procedure on All Cat^® Products {1408}

Installation Procedure to Retrofit a PL321VSR Electronic Control Module (ECM) With a Pro Product Link PL641 or PL631 or PL542 Systems {7606}
Installation Procedure to Retrofit a PL321VSR Electronic Control Module (ECM) With a Pro Product Link PL641 or PL631 or PL542 Systems {7606}

Installation Procedure to Retrofit a PL522 or PL523 With a Pro Product Link PL641 or PL631 or PL542 System {7606}
Installation Procedure to Retrofit a PL522 or PL523 With a Pro Product Link PL641 or PL631 or PL542 System {7606}

Service Magazine

Auto Clearing of Diagnostics and Events from Electronic Control Module (ECM) {1901, 1920, 7610, 7620}
2014/01/27

"Maintenance Mode" in Product Link is Used to Prevent Codes From Being Transmitted When Performing Service to a Machine or Engine {7606}
2014/11/24

Instructions for Preventing Utilization Messages Being Reported with Duplicate Time Stamps from PL321VSR Satellite Devices {7601}
2015/09/02

New Software is Now Used on Certain H Series Medium Wheel Loaders {7620}
New Software is Now Used on Certain H Series Medium Wheel Loaders {7620}

New Software Is Now Available for Cat® Product Link {7606, 7610, 7620}
New Software Is Now Available for Cat^® Product Link {7606, 7610, 7620}

New Machine Software for Cat® Product Link Is Now Available on Certain Cat® Products {7490, 7606, 7610, 7620}
New Machine Software for Cat^® Product Link Is Now Available on Certain Cat^® Products {7490, 7606, 7610, 7620}

A New Special Instruction for Installation Procedure to Retrofit a PL321VSR Electronic Control Module (ECM) With a Pro Product Link PL641 or PL631 or PL542 Systems is Now Available {7606}
A New Special Instruction for Installation Procedure to Retrofit a PL321VSR Electronic Control Module (ECM) With a Pro Product Link PL641 or PL631 or PL542 Systems is Now Available {7606}

A New Special Instruction for Installation Procedure to Retrofit a PL522 or PL523 With a Pro Product Link PL641 or PL631 or PL542 Systems is Now Available {7606}
A New Special Instruction for Installation Procedure to Retrofit a PL522 or PL523 With a Pro Product Link PL641 or PL631 or PL542 Systems is Now Available {7606}

Event Identification Number (EID) Above 60000 is Now Used on All Cat® Products {1400}
Event Identification Number (EID) Above 60000 is Now Used on All Cat^® Products {1400}

Operation and Maintenance Manual

High Intensity Discharge Lamp (HID) - Replace - If Equipped
950H and 962H Wheel Loaders

Special Instruction

Installation Procedure of the HID Flood Lighting Kit For Certain 950H - 980H Medium Wheel Loaders{1408, 1429, 1434, 1435, 7301, 7610, 7620}
Installation Procedure of the HID Flood Lighting Kit For Certain 950H - 980H Medium Wheel Loaders{1408, 1429, 1434, 1435, 7301, 7610, 7620}

Installation Procedure of the Flood Lighting Kit For 950H - 980H Medium Wheel Loaders{1408, 1429, 1434}
Installation Procedure of the Flood Lighting Kit For 950H - 980H Medium Wheel Loaders{1408, 1429, 1434}

Installation Instructions for the 448-3010 Lighting Group Warning Beacon Kit {1408, 1429, 1431, 1433, 7301}
Installation Instructions for the 448-3010 Lighting Group Warning Beacon Kit {1408, 1429, 1431, 1433, 7301}

Specifications

Flood Lamp
962H Wheel Loader and 962H
Wheel Loader Machine Systems

Service Magazine

New Stop and Tail Lamp Gp Is Now Used on Certain H-Series Medium Wheel Loaders {1432}
2014/03/21

Systems Operation

Data Link
950H Wheel Loader and 962H
Wheel Loader Electrohydraulic System

Special Instruction

Circuit Breaker Harness Assembly {1420}
Circuit Breaker Harness Assembly {1420}

Operation and Maintenance Manual

Engine Starting with Auxiliary Start Receptacle - If Equipped
950H and 962H Wheel Loaders

Service Magazine

Parts are Now Available to Make Jump Start Receptacle on Cat® Product {1463}
2014/03/04

Specifications

Fuel Level Sender
962H Wheel Loader and 962H
Wheel Loader Machine Systems

Special Instruction

Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}

Technical Information Bulletin

Failure of Rotary Position Sensors on Certain Caterpillar Machines {1913, 5736, 5737}
Failure of Rotary Position Sensors on Certain Caterpillar Machines {1913, 5736, 5737}

Specifications

Boost Pressure Sensor
C7 Engines for Caterpillar Built Machines

Temperature Sensor (Transmission Oil)
950H Wheel Loader and 962H
Wheel Loader Power Train

Temperature Sensor (Torque Converter Oil)
950H Wheel Loader and 962H
Wheel Loader Power Train

Coolant Temperature Sensor
C7 Engines for Caterpillar Built Machines

Speed Sensor (Torque Converter Output) (Transmission Output)
950H Wheel Loader and 962H
Wheel Loader Power Train

Speed/Timing Sensor
C7 Engines for Caterpillar Built Machines

Temperature Sensor (Hydraulic Oil)
950H and 962H Wheel Loaders Electrohydraulic System

Position Sensor (Throttle)
962H Wheel Loader and 962H
Wheel Loader Machine Systems

Pressure Sensor
950H and 962H Wheel Loaders Electrohydraulic System

Temperature Sensor (Front Axle Oil) (Rear Axle Oil)
950H Wheel Loader and 962H
Wheel Loader Power Train

Atmospheric Pressure Sensor
C7 Engines for Caterpillar Built Machines

Engine Oil Pressure Sensor
C7 Engines for Caterpillar Built Machines

Speed Sensor (Torque Converter Output)
950H Wheel Loader and 962H
Wheel Loader Power Train

Position Sensor (Left Brake Pedal)
950H Wheel Loader and 962H
Wheel Loader Braking and Hydraulic Fan System

Tool Operating Manual

Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}

Systems Operation

Position Sensor (Left Brake Pedal)
950H Wheel Loader and 962H
Wheel Loader Braking and Hydraulic Fan System

Sensors
950H Wheel Loader and 962H
Wheel Loader Power Train

Reuse And Salvage Guidelines

Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}

Testing and Adjusting

Speed Sensor - Adjust
950H Wheel Loader and 962H
Wheel Loader Power Train

Calibration
950H Wheel Loader and 962H
Wheel Loader Electrohydraulic System

Calibration and Programming
950H Wheel Loader and 962H
Wheel Loader Power Train

Position Sensor (Left Brake Pedal) (Electronic Technician) - Calibrate
950H Wheel Loader and 962H
Wheel Loader Power Train

Position Sensor (Left Brake Pedal) (Operator Monitor) - Calibrate
950H Wheel Loader and 962H
Wheel Loader Power Train

Position Sensor for the Electrohydraulic Control Levers or Joystick Control (Electronic Technician) - Calibrate
950H Wheel Loader and 962H
Wheel Loader Electrohydraulic System

Position Sensor for the Lift and Tilt Linkage (Electronic Technician) - Calibrate
950H Wheel Loader and 962H
Wheel Loader Electrohydraulic System

Troubleshooting

CID 0100 FMI 04 Engine Oil Pressure short to ground
C7 and C9 Engines for Caterpillar Built Machines

CID 0174 FMI 04 Fuel Temperature short to ground
C7 and C9 Engines for Caterpillar Built Machines

CID 0262 FMI 04 5 Volt Sensor DC Power Supply short to ground
C7 and C9 Engines for Caterpillar Built Machines

CID 0274 FMI 04 Atmospheric Pressure short to ground
C7 Engines for IT62H Integrated Toolcarrier and for 950H and 962H Wheel Loaders

CID 0041 FMI 04 8 Volt DC Supply short to ground
C7 Engines for IT62H Integrated Toolcarrier and for 950H and 962H Wheel Loaders

CID 0094 FMI 03 Fuel Pressure open/short to +batt
C7 Engines for IT62H Integrated Toolcarrier and for 950H and 962H Wheel Loaders

CID 0094 FMI 04 Fuel Pressure short to ground
C7 Engines for IT62H Integrated Toolcarrier and for 950H and 962H Wheel Loaders

CID 0110 FMI 03 Engine Coolant Temperature open/short to +batt
C7 and C9 Engines for Caterpillar Built Machines

CID 0110 FMI 04 Engine Coolant Temperature short to ground
C7 and C9 Engines for Caterpillar Built Machines

CID 0164 FMI 03 Injector Actuation Pressure voltage high
C7 Engines for IT62H Integrated Toolcarrier and for 950H and 962H Wheel Loaders

CID 0041 FMI 03 8 Volt DC Supply short to +batt
C7 and C9 Engines for Caterpillar Built Machines

CID 0091 FMI 08 Throttle Position signal abnormal
C7 and C9 Engines for Caterpillar Built Machines

CID 0100 FMI 03 Engine Oil Pressure open/short to +batt
C7 and C9 Engines for Caterpillar Built Machines

CID 0164 FMI 04 Injector Actuation Pressure voltage low
C7 and C9 Engines for Caterpillar Built Machines

CID 0172 FMI 03 Intake Manifold Air Temp open/short to +batt
C7 Engines for IT62H Integrated Toolcarrier and for 950H and 962H Wheel Loaders

CID 0172 FMI 04 Intake Manifold Air Temp short to ground
C7 Engines for IT62H Integrated Toolcarrier and for 950H and 962H Wheel Loaders

CID 0261 FMI 13 Engine Timing Calibration required
C7 and C9 Engines for Caterpillar Built Machines

CID 0274 FMI 03 Atmospheric Pressure open/short to +batt
C7 and C9 Engines for Caterpillar Built Machines

CID 0274 FMI 04 Atmospheric Pressure short to ground
C7 Engines for IT62H Integrated Toolcarrier and for 950H and 962H Wheel Loaders

Engine Speed/Timing Sensor - Calibrate
C7 Engines for IT62H Integrated Toolcarrier and for 950H and 962H Wheel Loaders

Digital Sensor Supply Circuit - Test
C7 and C9 Engines for Caterpillar Built Machines

CID 0262 FMI 03 5 Volt Sensor DC Power Supply short to +batt
C7 Engines for IT62H Integrated Toolcarrier and for 950H and 962H Wheel Loaders

Engine Speed/Timing Sensor Circuit - Test
C7 Engines for IT62H Integrated Toolcarrier and for 950H and 962H Wheel Loaders

CID 1785 FMI 03 Intake Manifold Pressure Sensor voltage high
C7 Engines for IT62H Integrated Toolcarrier and for 950H and 962H Wheel Loaders

CID 1785 FMI 04 Intake Manifold Pressure Sensor voltage low
C7 and C9 Engines for Caterpillar Built Machines

CID 0172 FMI 04 Intake Manifold Air Temp short to ground
C7 Engines for IT62H Integrated Toolcarrier and for 950H and 962H Wheel Loaders

CID 0342 FMI 08 Secondary Engine Speed signal abnormal
C7 Engines for IT62H Integrated Toolcarrier and for 950H and 962H Wheel Loaders

Engine Pressure Sensor Open or Short Circuit - Test
C7 and C9 Engines for Caterpillar Built Machines

Engine Temperature Sensor Open or Short Circuit - Test
C7 Engines for IT62H Integrated Toolcarrier and for 950H and 962H Wheel Loaders

CID 0172 FMI 03 Intake Manifold Air Temp open/short to +batt
C7 and C9 Engines for Caterpillar Built Machines

MID 074 - CID 0364 - FMI 03
Medium Wheel Loaders (MWL) Payload Control System (PCS) 3.0

MID 074 - CID 0364 - FMI 04
Medium Wheel Loaders (MWL) Payload Control System (PCS) 3.0

MID 074 - CID 0364 - FMI 08
Medium Wheel Loaders (MWL) Payload Control System (PCS) 3.0

MID 074 - CID 0769 - FMI 03
Medium Wheel Loaders (MWL) Payload Control System (PCS) 3.0

MID 074 - CID 0769 - FMI 04
Medium Wheel Loaders (MWL) Payload Control System (PCS) 3.0

MID 074 - CID 0769 - FMI 08
Medium Wheel Loaders (MWL) Payload Control System (PCS) 3.0

MID 074 - CID 1964 - FMI 08
Medium Wheel Loaders (MWL) Payload Control System (PCS) 3.0

MID 074 - CID 1964 - FMI 03
Medium Wheel Loaders (MWL) Payload Control System (PCS) 3.0

MID 074 - CID 1964 - FMI 04
Medium Wheel Loaders (MWL) Payload Control System (PCS) 3.0

CID 0174 FMI 03 Fuel Temperature open/short to +batt
C7 and C9 Engines for Caterpillar Built Machines

Sensors and Electrical Connectors
C7 and C9 Engines for Caterpillar Built Machines

Engine Temperature Sensor Open or Short Circuit - Test
C7 Engines for IT62H Integrated Toolcarrier and for 950H and 962H Wheel Loaders

5 Volt Engine Pressure Sensor Supply Circuit - Test
C7 Engines for IT62H Integrated Toolcarrier and for 950H and 962H Wheel Loaders

CID 0190 FMI 08 Engine Speed signal abnormal
C7 and C9 Engines for Caterpillar Built Machines

Sensors and Electrical Connectors
C7 Engines for IT62H Integrated Toolcarrier and for 950H and 962H Wheel Loaders

Digital Sensor Supply Circuit - Test
C7 Engines for IT62H Integrated Toolcarrier and for 950H and 962H Wheel Loaders

Engine Pressure Sensor Open or Short Circuit - Test
C7 Engines for IT62H Integrated Toolcarrier and for 950H and 962H Wheel Loaders

5 Volt Engine Pressure Sensor Supply Circuit - Test
C7 Engines for IT62H Integrated Toolcarrier and for 950H and 962H Wheel Loaders

CID 1785 FMI 10 Intake Manifold Pressure Signal abnormal rate of change
C7 and C9 Engines for Caterpillar Built Machines

MID 074 - CID 1964 - FMI 13
Medium Wheel Loaders (MWL) Payload Control System (PCS) 3.0

MID 074 - CID 1964 - FMI 02
Medium Wheel Loaders (MWL) Payload Control System (PCS) 3.0

MID 074 - CID 0364 - FMI 02
Medium Wheel Loaders (MWL) Payload Control System (PCS) 3.0

MID 074 - CID 0769 - FMI 02
Medium Wheel Loaders (MWL) Payload Control System (PCS) 3.0

Sensor Signal (PWM) - Test
950H Wheel Loader and 962H
Wheel Loader Power Train

Sensor Signal (Analog, Passive) - Test
950H Wheel Loader and 962H
Wheel Loader Power Train

Sensor Supply - Test
950H Wheel Loader and 962H
Wheel Loader Power Train

Sensor Signal (Analog, Passive) - Test
950H, 962H, 966H, 972H, 980H and 986H Wheel Loaders 5 Gauge Cluster

Speed Sensor - Test
950H Wheel Loader and 962H
Wheel Loader Power Train

Sensor Supply - Test
950H, 962H, 966H, 972H, 980H and 986H Wheel Loaders 5 Gauge Cluster

Sensor Signal (PWM) - Test
950H Wheel Loader and 962H
Wheel Loader Electrohydraulic System

Sensor Supply - Test
950H Wheel Loader and 962H
Wheel Loader Electrohydraulic System

Disassembly and Assembly

Atmospheric Pressure Sensor - Remove and Install
C7
Engines for Caterpillar Built Machines

Coolant Temperature Sensor - Remove and Install
C7
Engines for Caterpillar Built Machines

Engine Oil Pressure Sensor - Remove and Install
C7
Engines for Caterpillar Built Machines

Injection Actuation Pressure Sensor - Remove and Install
C7
Engines for Caterpillar Built Machines

Turbocharger Outlet Pressure Sensor - Remove and Install
C7
Engines for Caterpillar Built Machines

Speed/Timing Sensor - Remove and Install
C7
Engines for Caterpillar Built Machines

Inlet Air Temperature Sensor - Remove and Install
C7
Engines for Caterpillar Built Machines

Fuel Pressure Sensor - Remove and Install
C7
Engines for Caterpillar Built Machines

Lift Position Sensor and Mounting (Lift Kickout Control) - Remove and Install
950H and 962H Wheel Loaders Machine Systems

Service Magazine

Procedure Now Available to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
2013/02/28

Improved Position Sensor Is Now Used On Certain Wheel Loaders {1439, 5736, 5737}
2013/05/06

Improved Position Sensor Gp Is Now Used on Certain Medium and Large Wheel Loaders {5702, 5736}
2015/03/17

Disassembly and Assembly

Air Inlet Heater Solenoid - Remove and Install
C7
Engines for Caterpillar Built Machines

Operation and Maintenance Manual

Ether Starting Aid Cylinder - Replace - If Equipped
950H and 962H Wheel Loaders

Special Instruction

Procedure to Install 448-4855 Cold Weather Starting Ar on Certain 950H and 962H Medium Wheel Loaders{1380, 1383, 1456}
Procedure to Install 448-4855 Cold Weather Starting Ar on Certain 950H and 962H Medium Wheel Loaders{1380, 1383, 1456}

Troubleshooting

CID 2417 FMI 05 Ether Injection Control Solenoid current low
C7 and C9 Engines for Caterpillar Built Machines

CID 2417 FMI 06 Ether Injection Control Solenoid current high
C7 and C9 Engines for Caterpillar Built Machines

Ether Injection System - Test
C7 Engines for IT62H Integrated Toolcarrier and for 950H and 962H Wheel Loaders

Disassembly and Assembly

Starting Aid (Air Inlet Heater) - Remove
950H and 962H Wheel Loaders C7 Engine Supplement

Starting Aid (Air Inlet Heater) - Install
950H and 962H Wheel Loaders C7 Engine Supplement

Service Magazine

A New Ether Cylinder O-ring is Now Used on All Caterpillar Products {1456}
2013/09/19

Special Instruction

Starting Motor Solenoid - Replace {1467}
Starting Motor Solenoid - Replace {1467}

Installation of New Shift Lever Assembly for All Starter Motors {1453}
Installation of New Shift Lever Assembly for All Starter Motors {1453}

Procedure to Install the Insulator on to Series Starters on All Engines {1453}
Procedure to Install the Insulator on to Series Starters on All Engines {1453}

Installation of Repair Kit-Solenoid Plunger Assembly on All Engines {1453}
Installation of Repair Kit-Solenoid Plunger Assembly on All Engines {1453}

Procedure to Install Terminal Kit on All Engines {1453}
Procedure to Install Terminal Kit on All Engines {1453}

Procedure to Install Brush Holder Assembly in All Engines {1453}
Procedure to Install Brush Holder Assembly in All Engines {1453}

Procedure to Replace Armature of Starter Motor On All Cat® Products {1408, 1450, 1453}
Procedure to Replace Armature of Starter Motor On All Cat^® Products {1408, 1450, 1453}

Procedure to Replace Commutator End (CE) Housing of Starter Motor On All Cat® Products {1408, 1450, 1453}
Procedure to Replace Commutator End (CE) Housing of Starter Motor On All Cat^® Products {1408, 1450, 1453}

Procedure to Replace Drive Assembly of Starter Motor On All Cat® Products {1453}
Procedure to Replace Drive Assembly of Starter Motor On All Cat^® Products {1453}

Specifications

Electric Starting Motor
C7 Engines for Caterpillar Built Machines

Starting Motor
950H and 962H Wheel Loaders Starting Motor - Prestolite

Systems Operation

General Information
950H and 962H Wheel Loaders Starting Motor - Prestolite

Component Description
950H and 962H Wheel Loaders Starting Motor - Prestolite

Normal Operation
950H and 962H Wheel Loaders Starting Motor - Prestolite

Testing and Adjusting

Electric Starting System - Test
C7 Engines for Caterpillar Built Machines

Pinion Clearance - Adjust
C7 Engines for Caterpillar Built Machines

Pinion Drive - Check
950H and 962H Wheel Loaders Starting Motor - Prestolite

Troubleshooting

General Information
950H and 962H Wheel Loaders Starting Motor - Prestolite

Starting Motor Does Not Turn or Turns Slowly
950H and 962H Wheel Loaders Starting Motor - Prestolite

Engine Does Not Crank with Starting Motor On and Pinion Engaging Ring Gear
950H and 962H Wheel Loaders Starting Motor - Prestolite

Disassembly and Assembly

Electric Starting Motor - Remove and Install
C7
Engines for Caterpillar Built Machines

Electric Starting Motor - Remove
950H and 962H Wheel Loaders C7 Engine Supplement

Electric Starting Motor - Install
950H and 962H Wheel Loaders C7 Engine Supplement

Starting Motor - Disassemble
950H and 962H Wheel Loaders Starting Motor - Prestolite

Starting Motor - Assemble
950H and 962H Wheel Loaders Starting Motor - Prestolite

Service Magazine

An Improved Starting Motor Is Used on Certain C7 Machine Engines {1408, 1453}
2013/12/05

Improved Starter Motor is Now Used on 950H and 962H Wheel Loaders {1453}
2014/01/31

Improved Electric Starting Motor Is Now used on Certain 950H and 962H Wheel Loaders {1453}
Improved Electric Starting Motor Is Now used on Certain 950H and 962H Wheel Loaders {1453}

Operation and Maintenance Manual

Battery Disconnect Switch
950H and 962H Wheel Loaders

Special Instruction

Procedure to Install 3 - Function Lever Control on Certain H Series Medium Wheel Loaders {1408, 5063, 5702, 5705, 7332, 7610}
Procedure to Install 3 - Function Lever Control on Certain H Series Medium Wheel Loaders {1408, 5063, 5702, 5705, 7332, 7610}

Repair/Replacement Procedure for 5C-6108 Refueling Switch {1295}
Repair/Replacement Procedure for 5C-6108 Refueling Switch {1295}

Specifications

Limit Switch (Stop Light)
950H Wheel Loader and 962H
Wheel Loader Braking and Hydraulic Fan System

Magnetic Switch
C7 Engines for Caterpillar Built Machines

Toggle Switch (Ground Level Shutdown)
962H Wheel Loader and 962H
Wheel Loader Machine Systems

Pressure Switch (Parking Brake Oil)
950H Wheel Loader and 962H
Wheel Loader Braking and Hydraulic Fan System

Bypass Switch (Power Train Oil Filter)
950H Wheel Loader and 962H
Wheel Loader Power Train

Pressure Switch (Service Brake Oil)
950H Wheel Loader and 962H
Wheel Loader Braking and Hydraulic Fan System

Toggle Switch (Hood Tilt)
962H Wheel Loader and 962H
Wheel Loader Machine Systems

Pressure Switch (Secondary Steering)
950H Wheel Loader and 962H
Wheel Loader Steering System

Push Button Switch
962H Wheel Loader and 962H
Wheel Loader Machine Systems

Systems Operation

Pressure Switch (Refrigerant)
Air Conditioning and Heating R134a for All Caterpillar Machines

Rocker Switch (Transmission Neutralizer Override Control)
950H Wheel Loader and 962H
Wheel Loader Braking and Hydraulic Fan System

Switches
950H Wheel Loader and 962H
Wheel Loader Power Train

Start Relay
950H Wheel Loader and 962H
Wheel Loader Power Train

Testing and Adjusting

Limit Switch (Stop Light) - Adjust
950H Wheel Loader and 962H
Wheel Loader Braking and Hydraulic Fan System

Troubleshooting

Fuel Filter Differential Pressure Switch Circuit - Test
C7 and C9 Engines for Caterpillar Built Machines

Throttle Switch Circuit - Test
C7 and C9 Engines for Caterpillar Built Machines

Operator Control Switch (Switch to Ground) - Test
950H Wheel Loader and 962H
Wheel Loader Power Train

Relay - Test
950H Wheel Loader and 962H
Wheel Loader Power Train

Condition Switch (Two Wire) - Test
950H Wheel Loader and 962H
Wheel Loader Power Train

Operator Control Switch (Switch to Ground) - Test
950H, 962H, 966H, 972H, 980H and 986H Wheel Loaders 5 Gauge Cluster

Condition Switch (Two Wire) - Test
950H, 962H, 966H, 972H, 980H and 986H Wheel Loaders 5 Gauge Cluster

Operator Control Switch (Switch to Battery) - Test
950H, 962H, 966H, 972H, 980H and 986H Wheel Loaders 5 Gauge Cluster

Operator Control Switch (Switch to Ground) - Test
950H Wheel Loader and 962H
Wheel Loader Electrohydraulic System

Service Magazine

A Bolted Joint Best Practice procedure for the Magnetic Switch Group (Main Power Relay) is Now Available {1408, 7499}
A Bolted Joint Best Practice procedure for the Magnetic Switch Group (Main Power Relay) is Now Available {1408, 7499}

Tool Operating Manual

NEHS1032: 538-5051 Communications Adapter 3 {0599, 0709, 1900, 4800, 7490, 7600}
NEHS1032: 538-5051 Communications Adapter 3 {0599, 0709, 1900, 4800, 7490, 7600}

Using the Communications Adapter 3{1900}
Using the Communications Adapter 3{1900}

Using the 8T-2700 Blowby/Air Flow Indicator{0781, 0785, 1317}
Using the 8T-2700 Blowby/Air Flow Indicator{0781, 0785, 1317}

146-4080 Digital Multimeter Specification, Testing, and Maintenance Manual{0374, 0599, 0709}
146-4080 Digital Multimeter Specification, Testing, and Maintenance Manual{0374, 0599, 0709}

Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}

131-5051 Dataview Group and Dataview Portable Tech Station Group{0374, 0599, 0701, 0709}
131-5051 Dataview Group and Dataview Portable Tech Station Group{0374, 0599, 0701, 0709}

Using the 4C-8195 Control Service Tool{0374, 0599, 0709, 7490}
Using the 4C-8195 Control Service Tool{0374, 0599, 0709, 7490}

Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}

NEHS1270 TesLite and LoadProCables {0374, 0599, 0709, 0734}
NEHS1270 TesLite and LoadProCables {0374, 0599, 0709, 0734}

M0090131 Battery Analyzer 480-4181 (484-4859 Group) {0374, 0599, 0709, 1401, 7468}
M0090131 Battery Analyzer 480-4181 (484-4859 Group) {0374, 0599, 0709, 1401, 7468}

Systems Operation

VIMSpc Software
Medium Wheel Loaders (MWL) Payload Control System (PCS) 3.0

Service Operation Using Service Tool
Machine Security System (MSS3i) Integrated

Reuse And Salvage Guidelines

Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}

Troubleshooting

Electronic Service Tool Will Not Communicate with ECM
C7 and C9 Engines for Caterpillar Built Machines

Service Tools
Machine Security System

Using Caterpillar Electronic Technician to Determine Diagnostic Codes
Machine Security System

Service Tools
Medium Wheel Loaders (MWL) Payload Control System (PCS) 3.0

Electronic Service Tools
C7 Engines for IT62H Integrated Toolcarrier and for 950H and 962H Wheel Loaders

Factory Passwords
C7 and C9 Engines for Caterpillar Built Machines

Using Caterpillar Electronic Technician to Determine Diagnostic Codes
Medium Wheel Loaders (MWL) Payload Control System (PCS) 3.0

Service Tools
950H Wheel Loader and 962H
Wheel Loader Electrohydraulic System

Service Tools
950H Wheel Loader and 962H
Wheel Loader Power Train

Determining Diagnostic Trouble Codes
950H Wheel Loader and 962H
Wheel Loader Electrohydraulic System

Service Tools
950H, 962H, 966H, 972H, 980H and 986H Wheel Loaders 5 Gauge Cluster

Service Tools
950H and 962H Wheel Loaders Starting Motor - Prestolite

Service Tools
MSS3s Machine Security System

Service Magazine

Diagnostic Cables and Harnesses Are Available {0785}
2014/08/11

New Software For Cat® ET Can Now Be Used For All Caterpillar Products {0785, 7606}
2013/08/15

A New Communication Adapter Cable As Is Now Available For Certain Cat Products {0785}
A New Communication Adapter Cable As Is Now Available For Certain Cat Products {0785}

Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}
Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}

Military Electronic Technician (Military ET) Is Now Available For Military Personnel {0374, 0376, 0599, 1000, 7000, 7610, 7620}
Military Electronic Technician (Military ET) Is Now Available For Military Personnel {0374, 0376, 0599, 1000, 7000, 7610, 7620}

Operation and Maintenance Manual

Backup Alarm
950H and 962H Wheel Loaders

Backup Alarm - Test - If Equipped
950H and 962H Wheel Loaders

Troubleshooting

Alarm - Test
950H, 962H, 966H, 972H, 980H and 986H Wheel Loaders 5 Gauge Cluster

Alarm - Test
950H Wheel Loader and 962H
Wheel Loader Power Train

Operation and Maintenance Manual

Battery or Battery Cable - Inspect/Replace
950H and 962H Wheel Loaders

Battery Disconnect Switch
950H and 962H Wheel Loaders

Circuit Breakers - Reset
950H and 962H Wheel Loaders

Special Instruction

Cross-Reference for Electrical Connectors {7553}
Cross-Reference for Electrical Connectors {7553}

Circuit Breaker Harness Assembly {1420}
Circuit Breaker Harness Assembly {1420}

Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}
Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}

Service Letter-NACD

PRODUCT IMPROVEMENT PROGRAM FOR REWORKING THE INDICATOR PANEL LOCATION ON CAB GAUGE CLUSTER ON CERTAIN 950H AND 962H MEDIUM WHEEL LOADERS
PRODUCT IMPROVEMENT PROGRAM FOR REWORKING THE INDICATOR PANEL LOCATION ON CAB GAUGE CLUSTER ON CERTAIN 950H AND 962H MEDIUM WHEEL LOADERS

Service Letter-Americas

Specifications

Temperature Sensor (Torque Converter Oil)
950H Wheel Loader and 962H
Wheel Loader Power Train

Temperature Sensor (Hydraulic Oil)
950H and 962H Wheel Loaders Electrohydraulic System

Toggle Switch (Ground Level Shutdown)
962H Wheel Loader and 962H
Wheel Loader Machine Systems

Temperature Sensor (Front Axle Oil) (Rear Axle Oil)
950H Wheel Loader and 962H
Wheel Loader Power Train

Pressure Switch (Parking Brake Oil)
950H Wheel Loader and 962H
Wheel Loader Braking and Hydraulic Fan System

Bypass Switch (Power Train Oil Filter)
950H Wheel Loader and 962H
Wheel Loader Power Train

Pressure Switch (Service Brake Oil)
950H Wheel Loader and 962H
Wheel Loader Braking and Hydraulic Fan System

Systems Operation

Pressure Switch (Refrigerant)
Air Conditioning and Heating R134a for All Caterpillar Machines

Testing and Adjusting

Speed Sensor - Adjust
950H Wheel Loader and 962H
Wheel Loader Power Train

Electric Starting System - Test
C7 Engines for Caterpillar Built Machines

Wiring Harness (Open Circuit) - Test
Medium Wheel Loaders (MWL) Payload Control System (PCS) 3.0

Wiring Harness (Short Circuit) - Test
Medium Wheel Loaders (MWL) Payload Control System (PCS) 3.0

System Schematic
Machine Security System

Electrical Connector - Inspect
950H Wheel Loader and 962H
Wheel Loader Electrohydraulic System

Electrical Connector - Inspect
Machine Security System

Wiring Harness (Open Circuit) - Test
950H Wheel Loader and 962H
Wheel Loader Electrohydraulic System

Wiring Harness (Short Circuit) - Test
950H Wheel Loader and 962H
Wheel Loader Electrohydraulic System

Troubleshooting

Electrical Connectors - Inspect
C7 Engines for IT62H Integrated Toolcarrier and for 950H and 962H Wheel Loaders

CID 0100 FMI 04 Engine Oil Pressure short to ground
C7 and C9 Engines for Caterpillar Built Machines

CID 0174 FMI 04 Fuel Temperature short to ground
C7 and C9 Engines for Caterpillar Built Machines

CID 0262 FMI 04 5 Volt Sensor DC Power Supply short to ground
C7 and C9 Engines for Caterpillar Built Machines

CID 0274 FMI 04 Atmospheric Pressure short to ground
C7 Engines for IT62H Integrated Toolcarrier and for 950H and 962H Wheel Loaders

CID 0110 FMI 03 Engine Coolant Temperature open/short to +batt
C7 and C9 Engines for Caterpillar Built Machines

CID 0110 FMI 04 Engine Coolant Temperature short to ground
C7 and C9 Engines for Caterpillar Built Machines

CID 0164 FMI 03 Injector Actuation Pressure voltage high
C7 Engines for IT62H Integrated Toolcarrier and for 950H and 962H Wheel Loaders

CID 0091 FMI 08 Throttle Position signal abnormal
C7 and C9 Engines for Caterpillar Built Machines

CID 0617 FMI 05 Air Inlet Heater Relay open/current below normal
C7 and C9 Engines for Caterpillar Built Machines

CID 0100 FMI 03 Engine Oil Pressure open/short to +batt
C7 and C9 Engines for Caterpillar Built Machines

CID 0164 FMI 04 Injector Actuation Pressure voltage low
C7 and C9 Engines for Caterpillar Built Machines

CID 0172 FMI 03 Intake Manifold Air Temp open/short to +batt
C7 Engines for IT62H Integrated Toolcarrier and for 950H and 962H Wheel Loaders

CID 0172 FMI 04 Intake Manifold Air Temp short to ground
C7 Engines for IT62H Integrated Toolcarrier and for 950H and 962H Wheel Loaders

CID 0274 FMI 03 Atmospheric Pressure open/short to +batt
C7 and C9 Engines for Caterpillar Built Machines

CID 0274 FMI 04 Atmospheric Pressure short to ground
C7 Engines for IT62H Integrated Toolcarrier and for 950H and 962H Wheel Loaders

Fuel Filter Differential Pressure Switch Circuit - Test
C7 and C9 Engines for Caterpillar Built Machines

Engine Wiring Information
C7 Engines for IT62H Integrated Toolcarrier and for 950H and 962H Wheel Loaders

Electrical Component and Connector Locations
Machine Security System

CID 2417 FMI 05 Ether Injection Control Solenoid current low
C7 and C9 Engines for Caterpillar Built Machines

CID 2417 FMI 06 Ether Injection Control Solenoid current high
C7 and C9 Engines for Caterpillar Built Machines

Digital Sensor Supply Circuit - Test
C7 and C9 Engines for Caterpillar Built Machines

CID 0262 FMI 03 5 Volt Sensor DC Power Supply short to +batt
C7 Engines for IT62H Integrated Toolcarrier and for 950H and 962H Wheel Loaders

CID 1785 FMI 03 Intake Manifold Pressure Sensor voltage high
C7 Engines for IT62H Integrated Toolcarrier and for 950H and 962H Wheel Loaders

CID 1785 FMI 04 Intake Manifold Pressure Sensor voltage low
C7 and C9 Engines for Caterpillar Built Machines

CID 0172 FMI 04 Intake Manifold Air Temp short to ground
C7 Engines for IT62H Integrated Toolcarrier and for 950H and 962H Wheel Loaders

CID 0342 FMI 08 Secondary Engine Speed signal abnormal
C7 Engines for IT62H Integrated Toolcarrier and for 950H and 962H Wheel Loaders

CID 0617 FMI 06 Air Inlet Heater Relay grounded/current above norm
C7 and C9 Engines for Caterpillar Built Machines

Air Inlet Heater Circuit - Test
C7 Engines for IT62H Integrated Toolcarrier and for 950H and 962H Wheel Loaders

Engine Pressure Sensor Open or Short Circuit - Test
C7 and C9 Engines for Caterpillar Built Machines

CID 0172 FMI 03 Intake Manifold Air Temp open/short to +batt
C7 and C9 Engines for Caterpillar Built Machines

Connector Locations
Medium Wheel Loaders (MWL) Payload Control System (PCS) 3.0

CID 0174 FMI 03 Fuel Temperature open/short to +batt
C7 and C9 Engines for Caterpillar Built Machines

Sensors and Electrical Connectors
C7 and C9 Engines for Caterpillar Built Machines

Throttle Switch Circuit - Test
C7 and C9 Engines for Caterpillar Built Machines

Low Engine Oil Pressure Lamp Circuit - Test
C7 and C9 Engines for Caterpillar Built Machines

CID 0190 FMI 08 Engine Speed signal abnormal
C7 and C9 Engines for Caterpillar Built Machines

Sensors and Electrical Connectors
C7 Engines for IT62H Integrated Toolcarrier and for 950H and 962H Wheel Loaders

Digital Sensor Supply Circuit - Test
C7 Engines for IT62H Integrated Toolcarrier and for 950H and 962H Wheel Loaders

Engine Pressure Sensor Open or Short Circuit - Test
C7 Engines for IT62H Integrated Toolcarrier and for 950H and 962H Wheel Loaders

Air Inlet Heater Circuit - Test
C7 Engines for IT62H Integrated Toolcarrier and for 950H and 962H Wheel Loaders

CID 1785 FMI 10 Intake Manifold Pressure Signal abnormal rate of change
C7 and C9 Engines for Caterpillar Built Machines

Service Magazine

Dielectric Grease Should Not Be Used in Electrical Connectors {1408, 7553}
2012/05/04

419–9832 STEEL MILL ARRANGEMENT CUSTOM PRODUCT SUPPORT LITERATURE FOR THE 950H WHEEL LOADER JLX00001-UP (MACHINE) ELECTRICAL AND STARTING SYSTEM Caterpillar SIS

Parts group 950H:

Information:

Truck sale:

419&ndash;9832 STEEL MILL ARRANGEMENT CUSTOM PRODUCT SUPPORT LITERATURE FOR THE 950H WHEEL LOADER JLX00001-UP (MACHINE) ELECTRICAL AND STARTING SYSTEM Caterpillar SIS

Parts group 950H:

Information:

Truck sale:

419–9832 STEEL MILL ARRANGEMENT CUSTOM PRODUCT SUPPORT LITERATURE FOR THE 950H WHEEL LOADER JLX00001-UP (MACHINE) ELECTRICAL AND STARTING SYSTEM Caterpillar SIS