ELECTRICAL AND STARTING SYSTEM
SWITCH GPWIRING GP
POWER TRAIN
FILLER GP-POWER TRAIN OILFILTER GP
ELECTRICAL AND STARTING SYSTEM
SWITCH GP
#SEBC15690020
207-6941: SWITCH GP-TOGGLE
207-6941 SWITCH GP-TOGGLE
PART OF 431-9076 WIRING GP-CAB
PART OF 431-9076 WIRING GP-CAB
For full view, you need register
Parts for your 966H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 6T-3631 | [2] | NUT-HEX (15/32-32-THD) | |
| 2. | 6T-3632 | [1] | LOCKWASHER | |
| 3. | 6T-3633 | [1] | RING-LOCKING | |
| 4. | 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | |
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 5. | 8T-8729 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | |
| 6. | 112-4550 E | SLEEVE (15-CM) | ||
| 7. | 5P-5623 D | WIRE-ELECTRICAL (16-GA, BLACK)(0.4-M) | ||
| D | ORDER BY THE METER | |||
| E | ORDER BY THE CENTIMETER | |||
#SEBC15690021
321-5870: WIRING GP-AUTOLUBE CONTROL
321-5870 WIRING GP-AUTOLUBE CONTROL -WITH HEAT INSULATION
CUSTOM
PART OF 452-3102 LUBRICATION AR-AUTOMATIC
CUSTOM
PART OF 452-3102 LUBRICATION AR-AUTOMATIC
For full view, you need register
Parts for your 966H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7K-1181 | [16] | STRAP-CABLE | |
| 2. | 276-7400 | [1] | HARNESS AS-VALVE | |
| 8T-8729 | [3] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 8T-8730 | [8] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 8T-8737 | [3] | PLUG-SEAL | ||
| 114-8843 E | SLEEVE-PLASTIC (40-CM) | |||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(5-CM) | |||
| 102-8804 | [1] | KIT-RECEPTACLE (4-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 155-2265 | [1] | KIT-CONNECTING PLUG (8-PIN) | ||
| 155-2270 | [1] | KIT-CONNECTING PLUG (2-PIN) | ||
| (EACH PLUG KIT INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL) | ||||
| 3. | 277-8271 | [1] | HARNESS AS-PUMP (JUMPER) | |
| 8T-8729 | [14] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 146-4055 | [1] | RECEPTACLE AS | ||
| 102-8806 | [1] | KIT-RECEPTACLE (8-PIN) | ||
| (KIT INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8T-8737 | [2] | PLUG-SEAL | ||
| 4. | 277-8272 | [1] | HARNESS AS-SWITCH (LUBRICATION PRESSURE) | |
| 8T-8729 | [4] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 114-8843 E | SLEEVE-PLASTIC (20-CM) | |||
| 146-4073 | [1] | RECEPTACLE AS | ||
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 5. | 370-9488 | [13] | STRAP-CABLE | |
| 6. | 130-5300 | [2] | CLIP | |
| 7. | 2V-3216 | [1] | CLIP | |
| 8. | 4K-8864 | [2] | CLIP | |
| 9. | 6D-4244 | [2] | CLIP | |
| 10. | 8T-4121 | [2] | WASHER-HARD (11X21X2.5-MM THK) | |
| 11. | 8T-4136 M | [2] | BOLT (M10X1.5X25-MM) | |
| 12. | 193-6911 E | INSULATION (29-CM) | ||
| 12A. | 193-6911 E | INSULATION (104-CM) | ||
| 12B. | 193-6911 E | INSULATION (73-CM) | ||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
#SEBC15690022
431-9076: WIRING GP-CAB
For full view, you need register
Parts for your 966H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3E-5239 | [8] | RELAY AS (24-VOLT) | |
| 2. | 6I-1418 | [3] | SPACER (8.2X12.7X28.7-MM THK) | |
| 3. | 7K-1181 | [15] | STRAP-CABLE | |
| 4. | 8T-9655 | [6] | MOUNT-ISOLATION | |
| 5. | 9D-3767 | [1] | PLUG-BUTTON | |
| 6. | 9W-1442 | [1] | FUSE (10-AMPERE) | |
| 7. | 9X-2044 M | [8] | SCREW-TRUSS HEAD (M6X1X16-MM) | |
| 8. | 158-6634 Y | [1] | SWITCH GP-TOGGLE (ON, OFF) | |
| 9. | 189-8154 | [3] | GUARD-SWITCH | |
| 10. | 189-8359 | [1] | BRACKET AS | |
| 11. | 192-1590 Y | [1] | CONTROL GP-UNPROGRAMMED | |
| 12. | 200-1898 | [2] | SUPPRESSOR-ARC | |
| 13. | 207-6941 Y | [1] | SWITCH GP-TOGGLE (SINGLE POLE)(ENGINE START) | |
| 14. | 249-1293 | [1] | FILM-INSTRUCTION (ELECTRICAL POWER) | |
| 15. | 249-1294 | [1] | FILM-INFORMATION (ENGINE START) | |
| 16. | 249-5030 | [1] | FILM-INFORMATION (TRANSMISSION CONTROL) | |
| 17. | 284-0974 | [1] | PLATE | |
| 18. | 308-3529 | [1] | SWITCH AS-TOGGLE (TRANSMISSION OVERRIDE CONTROL) | |
| 6T-3631 | [2] | NUT-HEX (15/32-32-THD) | ||
| 6T-3632 | [1] | LOCKWASHER | ||
| 6T-3633 | [1] | RING-LOCKING | ||
| 8T-8729 | [12] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 230-4010 | [1] | RECEPTACLE AS-CONNECTOR (12-PIN) | ||
| 19. | 315-3232 | [1] | LAMP AS-INDICATOR (24-VOLT, GREEN) | |
| 8T-8729 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 20. | 320-2974 | [1] | COVER AS-PANEL | |
| 6V-9632 M | [4] | NUT-WELD (M6X1-THD) | ||
| 318-6726 | [1] | COVER | ||
| 21. | 361-2560 | [1] | FUSE GP | |
| 22. | 432-1511 | [1] | HARNESS AS-CAB | |
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 3E-5226 | [2] | SOCKET-CONNECTOR (12-GA TO 14-GA) | ||
| 3E-5519 | [8] | PLUG AS-CONNECTOR (5-PIN) | ||
| 3S-2093 | [2] | STRAP-CABLE | ||
| 5S-3657 | [1] | RECEPTACLE AS-CONNECTOR (10-PIN) | ||
| 7X-6222 | [1] | PLUG AS-CONNECTOR (24-PIN) | ||
| 3E-4367 | [1] | RING-RETAINING | ||
| 3E-8558 M | [1] | BOLT (M5X0.8X39.37-MM) | ||
| 9X-3265 | [2] | SEAL-CONNECTOR (24-PIN) | ||
| 8T-8737 | [78] | PLUG-SEAL | ||
| 9X-0145 | [1] | RECEPTACLE AS-CONNECTOR (24-PIN) | ||
| 100-5041 | [33] | TERMINAL-RECEPTACLE (18-GA TO 20-GA) | ||
| 114-8843 | [5] | SLEEVE-PLASTIC | ||
| 119-3662 | [20] | TUBE-HEAT SHRINK (10.85-MM DIA) | ||
| 125-7874 | [45] | TUBE-HEAT SHRINK (5.72-MM DIA) | ||
| 125-7875 | [25] | TUBE-HEAT SHRINK (7.44-MM DIA) | ||
| 9X-3402 | [62] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1768 | [62] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 126-1774 | [1] | COVER-CONNECTOR | ||
| 128-4155 | [2] | TERMINAL AS | ||
| (EACH INCLUDES) | ||||
| 5P-1475 | [1] | TERMINAL-FORK (14-GA TO 16-GA, NO. 8 SCREW) | ||
| 6V-2689 | [1] | TUBE-HEAT SHRINK (6.35-MM DIA) | ||
| 2L-8071 | [1] | TERMINAL-RING (10-GA TO 12-GA, 1/2-IN SCREW) | ||
| 5P-6006 | [1] | TUBE-HEAT SHRINK (9.52-MM DIA) | ||
| 2L-8077 | [2] | TERMINAL-RING (14-GA TO 16-GA, 1/4-IN SCREW) | ||
| 2L-8077 | [1] | TERMINAL-RING (14-GA TO 16-GA, 1/4-IN SCREW) | ||
| 2L-8081 | [1] | TERMINAL-RING (14-GA TO 16-GA, 1/2-IN SCREW) | ||
| 2L-8078 | [1] | TERMINAL-RING (14-GA TO 16-GA, 5/16-IN SCREW) | ||
| 125-7874 | [3] | TUBE-HEAT SHRINK (5.72-MM DIA) | ||
| 9X-3401 | [29] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1767 | [29] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 150-6765 | [1] | PLUG AS-CONNECTOR (26-PIN) | ||
| (INCLUDES PLUG AS & WEDGE) | ||||
| 159-9322 | [1] | SEAL-O-RING | ||
| 155-2270 | [3] | KIT-CONNECTING PLUG (2-PIN) | ||
| (INCLUDES PLUG AS & WEDGE) | ||||
| 155-2271 | [3] | KIT-CONNECTING PLUG (4-PIN) | ||
| (INCLUDES PLUG AS & WEDGE) | ||||
| 177-9648 | [1] | KIT-CONNECTING PLUG (2-PIN) | ||
| 230-4009 | [1] | PLUG AS-CONNECTOR (12-PIN) | ||
| 455-0709 | [1] | SEAL-CONNECTOR | ||
| 230-4011 | [1] | PLUG AS-CONNECTOR (2-PIN) | ||
| 455-0704 | [1] | SEAL-CONNECTOR | ||
| 243-4505 | [1] | RECEPTACLE AS-CONNECTOR (2-PIN) | ||
| 23. | 099-3649 M | [3] | BOLT (M8X1.25X40-MM) | |
| 24. | 110-6197 | [1] | GASKET | |
| 25. | 111-4627 M | [2] | SCREW-MACHINE (M6X1X30-MM) | |
| 26. | 3T-2662 | [1] | CIRCUIT BREAKER AS (15-AMPERE, AUTOMATIC RESET) | |
| 6V-8376 | [2] | SCREW-MACHINE (8-32X0.25-IN) | ||
| 9B-7233 | [2] | LOCKWASHER | ||
| 27. | 5P-8395 | [4] | SCREW-MACHINE | |
| 28. | 6B-4540 | [4] | NUT (4-40-THD) | |
| 29. | 9N-0869 | [3] | WASHER-HARD (8.8X25.5X2-MM THK) | |
| 30. | 9P-2553 | [2] | SPACER (6.83X10.28X11-MM THK) | |
| 31. | 9X-8486 | [2] | SCREW-MACHINE (8-32X0.75-IN) | |
| ****STANDARD REMOVAL**** | ||||
| 246-5459 AFJ | [1] | PLATE | ||
| A | NOT PART OF THIS GROUP | |||
| F | NOT SHOWN | |||
| J | PART OF STANDARD WIRING GP-CAB | |||
| M | METRIC PART | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBC15690023
420-2573: WIRING GP-CHASSIS
For full view, you need register
Parts for your 966H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3E-5169 | [1] | GUARD-SWITCH | |
| 2. | 7K-1181 B | [21] | STRAP-CABLE | |
| 3. | 189-3158 | [2] | SUPPRESSOR-ARC | |
| 4. | 213-0455 | [1] | SWITCH AS-TOGGLE (PARKING BRAKE OVERRIDE) | |
| 6T-3631 | [2] | NUT-HEX (15/32-32-THD) | ||
| 6T-3632 | [1] | LOCKWASHER | ||
| 6T-3633 | [1] | RING-LOCKING | ||
| 102-8805 | [1] | KIT-RECEPTACLE (6-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 5. | 248-3288 Y | [1] | CIRCUIT BREAKER GP (15-AMPERE) | |
| 6. | 249-5492 | [1] | GUARD-SWITCH | |
| 7. | 301-2979 | [1] | SWITCH GP-TOGGLE (GROUND LEVEL SHUTDOWN) | |
| 8T-8729 | [3] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 102-8804 | [1] | KIT-RECEPTACLE (4-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8. | 315-3232 | [1] | LAMP AS-INDICATOR (24-VOLT, GREEN)(PARKING BRAKE OVERRIDE) | |
| 9X-1813 E | SLEEVE (10-CM) | |||
| 186-3735 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 317-2820 | [1] | LAMP AS-INDICATOR (24-VOLT, GREEN) | ||
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 9. | 370-9488 B | [12] | STRAP-CABLE | |
| 10. | [1] | WIRING GP-PROTECTION | ||
| 2Q-0584 E | INSULATION (220-CM) | |||
| 2Q-0604 E | INSULATION (260-CM) | |||
| 370-9488 | [9] | STRAP-CABLE | ||
| 357-0984 | [1] | HARNESS AS-CHASSIS | ||
| 102-8802 | [5] | KIT-RECEPTACLE (2-PIN) | ||
| (EACH INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 2L-8081 | [1] | TERMINAL-RING (14-GA TO 16-GA, 1/2-IN SCREW) | ||
| 8T-8737 | [6] | PLUG-SEAL | ||
| 114-8843 E | SLEEVE-PLASTIC (180-CM) | |||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(55-CM) | |||
| 9X-3402 | [27] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1768 | [27] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 9X-3401 | [11] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1767 | [11] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 155-2260 | [1] | KIT-CONNECTING PLUG (3-PIN) | ||
| 155-2270 | [9] | KIT-CONNECTING PLUG (2-PIN) | ||
| 155-2271 | [1] | KIT-CONNECTING PLUG (4-PIN) | ||
| 155-2274 | [1] | KIT-CONNECTING PLUG (6-PIN) | ||
| (EACH PLUG KIT INCLUDES PLUG AS, WEDGE(S), & INTERFACE SEAL) | ||||
| 243-4505 | [1] | RECEPTACLE AS-CONNECTOR (2-PIN) | ||
| 285-5600 | [1] | TERMINAL AS-RING | ||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(4-CM) | |||
| 11. | 130-5300 | [4] | CLIP | |
| 12. | 132-5789 | [1] | CLIP (LADDER) | |
| 13. | 174-5907 | [2] | CLIP | |
| 14. | 4B-4274 | [2] | WASHER (5.5X13X1.2-MM THK) | |
| 15. | 4P-7429 | [2] | CLIP (LADDER) | |
| 16. | 7U-4892 | [2] | SCREW (8-32X0.75-IN) | |
| 17. | 7X-0620 | [1] | WASHER-HARD (5.5X13X1.6-MM THK) | |
| 18. | 8M-2772 | [1] | CLIP (LOOP) | |
| 19. | 8R-8087 | [1] | SPACER (11X22X28-MM THK) | |
| 20. | 8T-4121 | [3] | WASHER-HARD (11X21X2.5-MM THK) | |
| 21. | 8T-4133 M | [1] | NUT (M10X1.5-THD) | |
| 22. | 8T-4136 M | [1] | BOLT (M10X1.5X25-MM) | |
| 23. | 8T-6466 M | [1] | BOLT (M10X1.5X60-MM) | |
| 24. | 135-5009 E | TUBE-HEAT SHRINK (32-MM DIA)(6-CM) | ||
| B | USE AS REQUIRED | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBC15690024
380-7699: WIRING GP-PROTECTION
380-7699 WIRING GP-PROTECTION -TILT SENSOR
CUSTOM
PART OF 455-8491 ELECTRICAL AR
CUSTOM
PART OF 455-8491 ELECTRICAL AR
For full view, you need register
Parts for your 966H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | Y | [1] | WIRING GP-PROTECTION (TILT POSITION SENSOR) | |
| 2. | 6V-1889 | [4] | CLIP (LOOP) | |
| 3. | 2Q-0584 E | INSULATION (20-CM) | ||
| ****STANDARD REMOVAL**** | ||||
| 4K-8864 FJ | [3] | CLIP | ||
| 130-5300 FJ | [1] | CLIP | ||
| 316-8510 FJ | [1] | HARNESS AS-SENSOR (TILT) | ||
| E | ORDER BY THE CENTIMETER | |||
| F | NOT SHOWN | |||
| J | PART OF STANDARD WIRING GP-SENSOR | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBC15690025
380-7703: WIRING GP-PROTECTION
380-7703 WIRING GP-PROTECTION -TILT POSITION SENSOR
CUSTOM
PART OF 380-7699 WIRING GP-PROTECTION
CUSTOM
PART OF 380-7699 WIRING GP-PROTECTION
For full view, you need register
Parts for your 966H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 370-9488 C | [6] | STRAP-CABLE | |
| 2. | 416-1905 C | [1] | CABLE AS | |
| 3E-3371 | [1] | WEDGE-RECEPTACLE LOCK (3-PIN) | ||
| 102-8803 | [1] | KIT-RECEPTACLE (3-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 9X-1813 E | SLEEVE (12-CM) | |||
| 125-7876 E | TUBE-HEAT SHRINK (17.78-MM DIA)(13-CM) | |||
| 9X-3402 | [3] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1768 | [3] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 9X-3401 | [3] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1767 | [3] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 155-2260 | [1] | KIT-CONNECTING PLUG (3-PIN) | ||
| (INCLUDES PLUG AS, WEDGES & INTERFACE SEAL) | ||||
| 3. | 2Q-0604 E | INSULATION (159-CM) | ||
| 3A. | 2Q-0604 E | INSULATION (69-CM) | ||
| 3B. | 2Q-0604 E | INSULATION (44-CM) | ||
| C | CHANGE FROM PREVIOUS TYPE | |||
| E | ORDER BY THE CENTIMETER | |||
#SEBC15690026
455-8489: WIRING GP-PROTECTION
455-8489 WIRING GP-PROTECTION -WITH HEAT INSULATION
CUSTOM
PART OF 455-8491 ELECTRICAL AR
CUSTOM
PART OF 455-8491 ELECTRICAL AR
For full view, you need register
Parts for your 966H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 370-9488 | [41] | STRAP-CABLE | |
| 2. | 455-8488 | [1] | WIRING GP-PROTECTION (WITH HEAT INSULATION) | |
| 2Q-0584 BE | INSULATION | |||
| 2Q-0604 BE | INSULATION | |||
| 2Q-2153 BE | INSULATION | |||
| 193-6911 BE | INSULATION | |||
| 370-9488 | [38] | STRAP-CABLE | ||
| 393-6513 Y | [1] | HARNESS AS-FRONT | ||
| 3. | 134-5645 | [1] | CLIP | |
| ****STANDARD REMOVAL**** | ||||
| 7K-1181 AFJ | [31] | STRAP-CABLE | ||
| 147-0385 AFJ | [1] | CLIP | ||
| 393-6513 AFJY | [1] | HARNESS AS-FRONT | ||
| A | NOT PART OF THIS GROUP | |||
| B | USE AS REQUIRED | |||
| E | ORDER BY THE CENTIMETER | |||
| F | NOT SHOWN | |||
| J | PART OF STANDARD WIRING GP-FRONT | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBC15690027
455-8490: WIRING GP-PROTECTION
455-8490 WIRING GP-PROTECTION -STEEL MILL
CUSTOM
PART OF 455-8491 ELECTRICAL AR
CUSTOM
PART OF 455-8491 ELECTRICAL AR
For full view, you need register
Parts for your 966H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 278-5259 | [1] | HARNESS AS-SENSOR (AXLE TEMPERATURE)(FRONT) | |
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 6V-2722 D | TUBE-HEAT SHRINK (25.4-MM DIA)(0.1-M) | |||
| 114-8843 E | SLEEVE-PLASTIC (40-CM) | |||
| 9X-3402 | [2] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1768 | [2] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 9X-3401 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1767 | [2] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 155-2270 | [1] | KIT-CONNECTING PLUG (2-PIN) | ||
| (INCLUDES PLUG AS & WEDGE) | ||||
| 2. | 328-4421 | [1] | HARNESS AS-SENSOR (REAR) | |
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 6V-2722 D | TUBE-HEAT SHRINK (25.4-MM DIA)(0.1-M) | |||
| 114-8843 E | SLEEVE-PLASTIC (40-CM) | |||
| 9X-3402 | [2] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1768 | [2] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 9X-3401 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1767 | [2] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 155-2270 | [1] | KIT-CONNECTING PLUG (2-PIN) | ||
| (INCLUDES PLUG AS & WEDGE) | ||||
| 3. | 370-9488 | [5] | STRAP-CABLE | |
| 4. | 3S-8665 | [1] | CLIP | |
| 5. | 6V-1889 | [5] | CLIP (LOOP) | |
| 6. | 2Q-0604 E | INSULATION (145-CM) | ||
| 6A. | 2Q-0604 E | INSULATION (100-CM) | ||
| ****STANDARD REMOVAL**** | ||||
| 9M-8406 AFJ | [5] | CLIP (LOOP) | ||
| 5P-9085 AFJ | [1] | CLIP | ||
| 3S-2093 AFJ | [2] | STRAP-CABLE | ||
| 7K-1181 AFJ | [1] | STRAP-CABLE | ||
| A | NOT PART OF THIS GROUP | |||
| D | ORDER BY THE METER | |||
| E | ORDER BY THE CENTIMETER | |||
| F | NOT SHOWN | |||
| J | PART OF STANDARD WIRING GP-AXLE TEMPERATURE | |||
#SEBC15690028
426-1435: FILLER GP-POWER TRAIN OIL
426-1435 FILLER GP-POWER TRAIN OIL -WITH HEAT INSULATION
CUSTOM
PART OF 426-1415 PROTECTION AR-HEAT
CUSTOM
PART OF 426-1415 PROTECTION AR-HEAT
For full view, you need register
Parts for your 966H WHEEL LOADER:
CATERPILLAR SIS#SEBC15690029
231-6181: FILTER GP-OIL
231-6181 FILTER GP-OIL
PART OF 452-3101 STEEL MILL AR
PART OF 452-3101 STEEL MILL AR
For full view, you need register
Parts for your 966H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 227-6744 | [1] | SWITCH GP-PRESSURE (ROTOR TRANSMISSION) | |
| 8T-8729 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 5F-9144 | [1] | SEAL-O-RING | ||
| 3J-1907 | [1] | SEAL-O-RING | ||
| 9X-1813 E | SLEEVE (14-CM) | |||
| 2. | 183-7264 | [1] | VALVE AS-FLUID SAMPLING (ROTOR TRANSMISSION) | |
| 3J-1907 | [1] | SEAL-O-RING | ||
| 3. | 3J-1907 | [2] | SEAL-O-RING | |
| 4. | 108-1153 | [1] | FILTER-OIL (ADVANCED EFFICIENCY)(ROTOR TRANSMISSION) | |
| 5. | 8C-3447 | [1] | CAP-DUST | |
| 6. | 9S-4191 | [1] | PLUG (9/16-18-THD) | |
| E | ORDER BY THE CENTIMETER | |||
Information:
ELECTRICAL AND STARTING SYSTEM
SWITCH GP
Operation and Maintenance Manual
Special Instruction
Procedure to Install 3 - Function Lever Control on Certain H Series Medium Wheel Loaders {1408, 5063, 5702, 5705, 7332, 7610}
Procedure to Install 3 - Function Lever Control on Certain H Series Medium Wheel Loaders {1408, 5063, 5702, 5705, 7332, 7610}
Procedure to Install 3 - Function Lever Control on Certain H Series Medium Wheel Loaders {1408, 5063, 5702, 5705, 7332, 7610}
Repair/Replacement Procedure for <NOBR> 5C-6108</NOBR> Refueling Switch {1295}
Repair/Replacement Procedure for 5C-6108 Refueling Switch {1295}
Repair/Replacement Procedure for
Specifications
Systems Operation
Rocker Switch (Transmission Neutralizer Override Control)
966H and 972H Wheel Loaders Braking and Hydraulic Fan System
966H and 972H Wheel Loaders Braking and Hydraulic Fan System
Testing and Adjusting
Troubleshooting
Operator Control Switch (Switch to Ground) - Test
950H, 962H, 966H, 972H, 980H and 986H Wheel Loaders 5 Gauge Cluster
950H, 962H, 966H, 972H, 980H and 986H Wheel Loaders 5 Gauge Cluster
Condition Switch (Two Wire) - Test
950H, 962H, 966H, 972H, 980H and 986H Wheel Loaders 5 Gauge Cluster
950H, 962H, 966H, 972H, 980H and 986H Wheel Loaders 5 Gauge Cluster
Operator Control Switch (Switch to Battery) - Test
950H, 962H, 966H, 972H, 980H and 986H Wheel Loaders 5 Gauge Cluster
950H, 962H, 966H, 972H, 980H and 986H Wheel Loaders 5 Gauge Cluster
Operator Control Switch (Switch to Ground) - Test
966H, 972H and 980H Wheel Loaders Power Train Electronic Control System
966H, 972H and 980H Wheel Loaders Power Train Electronic Control System
Operator Control Switch (Switch to Ground) - Test
966H, 972H and 980H Wheel Loaders Electrohydraulic System
966H, 972H and 980H Wheel Loaders Electrohydraulic System
Condition Switch (Two Wire) - Test
966H, 972H and 980H Wheel Loaders Power Train Electronic Control System
966H, 972H and 980H Wheel Loaders Power Train Electronic Control System
Service Magazine
A Bolted Joint Best Practice procedure for the Magnetic Switch Group (Main Power Relay) is Now Available {1408, 7499}
A Bolted Joint Best Practice procedure for the Magnetic Switch Group (Main Power Relay) is Now Available {1408, 7499}
A Bolted Joint Best Practice procedure for the Magnetic Switch Group (Main Power Relay) is Now Available {1408, 7499}
