AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

322B EXCAVATORS EQUIPPED WITH CUSTOM ATTACHMENTS 1ZS00001-UP (MACHINE) HYDRAULIC SYSTEM Caterpillar SIS



EXCAVATOR 322B LN EXCAVATOR 1ZS
 322B EXCAVATORS EQUIPPED WITH CUSTOM ATTACHMENTS 1ZS00001-UP (MACHINE) SEBF0910 322B LN 1ZS   (1996)

Parts group 322B LN:

  For full view, you need register
HYDRAULIC SYSTEM
CYLINDER GP
LINES GP - BUCKET CYLINDER
145-5794 LINES GP - BUCKET CYLINDER
1455794 (V02) LINES GP - BUCKET CYLINDER
"B" FAMILY
STICK R3.9B
PART OF 1832575 STICK AR - R3.9B
196-4778 CYLINDER AR
1964778 (V00) CYLINDER AR
CYLINDER AR
PIN 2ES1-UP, 1ZS1-UP
207-7900 CYLINDER AR
2077900 (V00) CYLINDER AR
CYLINDER AR
PIN 2ES1-UP, 1ZS1-UP
PART OF
LINES GP-BUCKET
LINES GP - BUCKET CYLINDER
145-5794 LINES GP - BUCKET CYLINDER
1455794 (V02) LINES GP - BUCKET CYLINDER
"B" FAMILY
STICK R3.9B
PART OF 1832575 STICK AR - R3.9B
LINES GP-STICK
LINES GP - STICK
119-2605 LINES GP - STICK
1192605 (HE00) LINES GP - STICK
M2.9C
PART OF 1630750 STICK AR - M2.9C
VALVE GP
195-7731 VALVE AR TLCV
1955731 (V01) VALVE AR TLCV
VALVE AR -TLCV
(B - LINK)
PIN 2ES1-UP, 1ZS1-UP
VALVE AR TLCV
195-7731 VALVE AR TLCV
1957731 (V01) VALVE AR TLCV (contd.)
196-6698 VALVE AR TLCV
1966698 (V01) VALVE AR TLCV
VALVE AR -TLCV
(C - LINK)
PIN 2ES1-UP
VALVE AR TLCV
196-6698 VALVE AR TLCV
1966698 (V01) VALVE AR TLCV (contd.)
204-7317 VALVE AR TLCV
2047317 (V00) VALVE AR TLCV
VALVE AR - TLCV
(D -LINK)
PIN 2ES1-UP, 1ZS1-UP
PART OF
VALVE AR TLCV
204-7317 VALVE AR TLCV
2047317 (V00) VALVE AR TLCV (contd.)
VALVE GP-CONTROL
195-7731 VALVE AR TLCV
1955731 (V01) VALVE AR TLCV
VALVE AR -TLCV
(B - LINK)
PIN 2ES1-UP, 1ZS1-UP
VALVE AR TLCV
195-7731 VALVE AR TLCV
1957731 (V01) VALVE AR TLCV (contd.)
196-6698 VALVE AR TLCV
1966698 (V01) VALVE AR TLCV
VALVE AR -TLCV
(C - LINK)
PIN 2ES1-UP
VALVE AR TLCV
196-6698 VALVE AR TLCV
1966698 (V01) VALVE AR TLCV (contd.)
204-7317 VALVE AR TLCV
2047317 (V00) VALVE AR TLCV
VALVE AR - TLCV
(D -LINK)
PIN 2ES1-UP, 1ZS1-UP
PART OF
VALVE AR TLCV
204-7317 VALVE AR TLCV
2047317 (V00) VALVE AR TLCV (contd.)

Information:

(For parts list, see above)

Special Instruction
Accumulator Discharging and Charging Procedures {0738, 4263, 4264, 4331, 5077, 5077, 5081, 7474}
Accumulator Discharging and Charging Procedures {0738, 4263, 4264, 4331, 5077, 5077, 5081, 7474}
Decommissioning Procedure for Permanently Sealed Diaphragm Accumulators {5077}
Decommissioning Procedure for Permanently Sealed Diaphragm Accumulators {5077}
Service Letter-NACD
The Bond Between The Steel And The Rubber On The 3Q7749 Seal May Allow Gas To Leak
The Bond Between The Steel And The Rubber On The 3Q7749 Seal May Allow Gas To Leak
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Technical Information Bulletin
Updated Ride Control Accumulator Test and Charge Instructions{0738, 5004, 5077, 5081, 7474}
Updated Ride Control Accumulator Test and Charge Instructions{0738, 5004, 5077, 5081, 7474}
Specifications
Accumulator
322B, 322B L and 322B LN Excavators Machine System Specifications
Tool Operating Manual
NEHS1214: 455-0126 Nitrogen Booster Pump Group {0374, 0599, 0647, 0756, 4263, 4331, 5077, 7200}
NEHS1214: 455-0126 Nitrogen Booster Pump Group {0374, 0599, 0647, 0756, 4263, 4331, 5077, 7200}
Service Letter-China
The Bond Between The Steel And The Rubber On The 3Q7749 Seal May Allow Gas To Leak
The Bond Between The Steel And The Rubber On The 3Q7749 Seal May Allow Gas To Leak
Service Letter-Asia
Service Letter-APD
Disassembly and Assembly
Hydraulic Accumulator
322B & 322B L EXCAVATORS MACHINE SYSTEMS
Service Magazine
Procedure for Testing and Charging the Pilot System Accumulators {5077}
2003/05/05
The Accumulator Discharging and Charging Procedures are Updated {5077}
The Accumulator Discharging and Charging Procedures are Updated {5077}
Correct the Flow Meter Tool Layout in Systems Operation/Testing and Adjusting, RENR1020 {5050}
1999/12/06
Quieter Solenoid Valve For Swing Parking Brake {5479,5483}
1997/12/01
Technical Information Bulletin
Updated Ride Control Accumulator Test and Charge Instructions{0738, 5004, 5077, 5081, 7474}
Updated Ride Control Accumulator Test and Charge Instructions{0738, 5004, 5077, 5081, 7474}
Operation and Maintenance Manual
Swing Out Hydraulic Oil Cooler - Clean - If Equipped
320B, 322B and 325B Excavators
Special Instruction
Retrofit Installation of Coolant Loss Sensor{1353, 1395, 7422, 7470}
Retrofit Installation of Coolant Loss Sensor{1353, 1395, 7422, 7470}
Service Letter-NACD
Product Support Program For Replacing The Leaking Oil Cooler On Certain 320B, 322B, 325B And 330B Excavators
Product Support Program For Replacing The Leaking Oil Cooler On Certain 320B, 322B, 325B And 330B Excavators
PRODUCT SUPPORT PROGRAM FOR REPLACING THE HYDRAULIC OIL COOLER THAT MAY CRACK ON CERTAIN 320B, 322B, 325B AND 330B EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE HYDRAULIC OIL COOLER THAT MAY CRACK ON CERTAIN 320B, 322B, 325B AND 330B EXCAVATORS
Service Letter-CSARL
Product Support Program For Replacing The Leaking Oil Cooler On Certain 320B, 322B, 325B And 330B Excavators
Product Support Program For Replacing The Leaking Oil Cooler On Certain 320B, 322B, 325B And 330B Excavators
PRODUCT SUPPORT PROGRAM FOR REPLACING THE HYDRAULIC OIL COOLER THAT MAY CRACK ON CERTAIN 320B, 322B, 325B AND 330B EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE HYDRAULIC OIL COOLER THAT MAY CRACK ON CERTAIN 320B, 322B, 325B AND 330B EXCAVATORS
Service Letter-Americas
Product Support Program For Replacing The Leaking Oil Cooler On Certain 320B, 322B, 325B And 330B Excavators
Product Support Program For Replacing The Leaking Oil Cooler On Certain 320B, 322B, 325B And 330B Excavators
PRODUCT SUPPORT PROGRAM FOR REPLACING THE HYDRAULIC OIL COOLER THAT MAY CRACK ON CERTAIN 320B, 322B, 325B AND 330B EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE HYDRAULIC OIL COOLER THAT MAY CRACK ON CERTAIN 320B, 322B, 325B AND 330B EXCAVATORS
Disassembly and Assembly
Hydraulic Oil Cooler
SUPPLEMENT FOR 322B & 322B L EXCAVATORS - 3116 ENGINE
Radiator
SUPPLEMENT FOR 322B & 322B L EXCAVATORS - 3116 ENGINE
Service Magazine
Canister Size Of Coolant Conditioner Element Has Changed{1350}
1985/11/25
Field Repair Of Cooler Cores Made Of Aluminium{1063,1374,1375}
1977/09/05
Easy Five-Minute Coolant Conditioner Test With 8T5296 Coolant Conditioner Test Kit{1395,0786}
1987/03/23
5P957 And 5P3514 Coolant And Battery Tester{0786,1395,1401}
1987/03/23
Be Sure Battery Cable-To-Starter Connection Has Correct Torque{1453}
1988/03/14
Improved Seals Used; Seal Replacement In Folded Core Radiators {1353}
1988/05/09
New Publication Available-"Coolant And Your Engine"{1395,0374,0375}
1989/02/13
Engine Coolant Can Be Recycled{1395}
1989/11/13
Caterpillar Introduces New Long Life Heavy Duty Engine Coolant{1395}
1994/09/19
Test Kit Checks Oil Coolers for Leaks {0768, 0781, 0783, 0784}
2004/12/27
Disassembly and Assembly
Counterweight
322B & 322B L EXCAVATORS MACHINE SYSTEMS
Main Hydraulic Pump & Pump Drive Coupling
322B & 322B L EXCAVATORS MACHINE SYSTEMS
Service Magazine
Information Release Memo, HOS04-02, "XT-6 Hose and Couplings to XT-6 ES Components" Is Available {5057}
2004/06/21
Information Release Memo, PELJ0340 , "Reusable Couplings for Caterpillar -12 and -16 XT-6 ES Hose" {5057}
2004/06/28
Special Instruction
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Service Letter-NACD
Product Support Program For Hydraulic Cylinder Noisy With Bio Oil On Certain 320B, 322B, 325B And 330B Excavators
Product Support Program For Hydraulic Cylinder Noisy With Bio Oil On Certain 320B, 322B, 325B And 330B Excavators
Service Letter-CSARL
Service Letter-Americas
Technical Information Bulletin
The Failure of the Buffer Seal that can be Caused by a Defect in the Seal Groove on All Track-Type Tractors, Wheel Loaders, Hydraulic Excavators and Backhoe Loaders that Use Cylinders that were Manufactured After 1January 2000{7562}
The Failure of the Buffer Seal that can be Caused by a Defect in the Seal Groove on All Track-Type Tractors, Wheel Loaders, Hydraulic Excavators and Backhoe Loaders that Use Cylinders that were Manufactured After 1January 2000{7562}
Discoloration of the Hydraulic Cylinder Rod on Certain Excavators{5102, 5456, 5457, 5458, 5468, 7562}
Discoloration of the Hydraulic Cylinder Rod on Certain Excavators{5102, 5456, 5457, 5458, 5468, 7562}
Surface Finishes of Cylinder Bores{7562}
Surface Finishes of Cylinder Bores{7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Specifications
Bucket Cylinder
322B Excavator Machine System Attachment Specifications
Stick Cylinder
322B Excavator Machine System Attachment Specifications
Boom Cylinder
322B Excavator Machine System Attachment Specifications
Tool Operating Manual
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Reuse And Salvage Guidelines
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
Contamination Control Guidelines
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Applied Failure Analysis
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Bench Test Procedures
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Disassembly and Assembly
Bucket Cylinder
322B & 322B L EXCAVATORS MACHINE SYSTEMS
Stick Cylinder
322B & 322B L EXCAVATORS MACHINE SYSTEMS
Boom Cylinders
322B & 322B L EXCAVATORS MACHINE SYSTEMS
Service Magazine
New Bearings In The Boom, Stick, And Boom Cylinder Assemblies Improve Linkage Pin Service Life{6501,6502}
1997/10/20
An Improved Dust Seal for Hydraulic Cylinders Increases the Service Life {5456, 5457, 5458, 7555, 7555}
2000/07/10
New Backup Rings Are Available for Sealing Hydraulic Cylinders with Pitted Grooves {4303, 5102, 5104, 5106, 5456, 7562}
2002/07/01
New Assembly Instructions for Rod Seals on Hydraulic Cylinders are Available {7562}
2002/04/08
New High Temperature Buffer Seals Reduce Oil Leakage From Hydraulic Cylinders {7562}
2002/05/06
Correctly Assembling the Buffer Seal Will Prevent Failure of the U-Cup Seals {7562}
2001/07/30
Procedure for the Removal of Air From Hydraulic Cylinders {7562}
2003/01/06
Double Lip Wiper Seals Must Be Installed Properly {7562}
2002/12/09
Summary of the New Seals for Hydraulic Cylinder Rods {5456, 5457, 5458}
2003/11/17
Boom Cylinder Link Assemblies Support Implement During Service {0635, 0738}
2004/03/08
A New Rod Assembly for the Stick Cylinder Is Available {5458}
2007/01/22
Procedure Now Available to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
2012/10/04
Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
Correct Ring Orientation Provides Smooth Hydraulic Cylinder Operation {5456, 5458}
2009/03/16
A Rework Procedure Improves the Seal Assembly Performance in Hydraulic Cylinders on Cat Products {7562}
2010/04/30
Operation and Maintenance Manual
Final Drive Oil and Swing Drive Oil
320B, 322B and 325B Excavators
Swing Drive Oil Level - Check
320B, 322B and 325B Excavators
Swing Drive Oil - Change
320B, 322B and 325B Excavators
Swing Drive Oil Sample - Obtain
320B, 322B and 325B Excavators
Disassembly and Assembly
Swing Drive
322B & 322B L EXCAVATORS MACHINE SYSTEMS
Main Hydraulic Pump &amp; Pump Drive Coupling
322B & 322B L EXCAVATORS MACHINE SYSTEMS
Service Magazine
The Specifications Are Identified For Auxiliary Hydraulic Pumps {3108, 5073}
2008/06/16
The Operational Definition For Excavator Swing Drive Oil Level Has Been Revised. {5459}
2003/12/15
Procedure for the Measurement of the Movement of the Swing Bearing {5459, 7063}
2008/09/29
Proper Operation of Swing Function Will Prevent Damage to the Swing Motor and the Bearings in the Swing Drive {5459, 7063, 79PA}
2006/03/27
An Improved Bolt Tightening Procedure for the Critical Joints Is Now Used on All Excavators {4050, 4164, 5459, 7063}
An Improved Bolt Tightening Procedure for the Critical Joints Is Now Used on All Excavators {4050, 4164, 5459, 7063}
Operation and Maintenance Manual
Oil Filter - Inspect
320B, 322B and 325B Excavators
Hydraulic System Oil Filter - Replace
320B, 322B and 325B Excavators
Hydraulic System Bio Filter Element - Replace - If Equipped
320B, 322B and 325B Excavators
Hydraulic System Bio Filter Pressure Gauge - Inspect - If Equipped
320B, 322B and 325B Excavators
Hydraulic System Oil Filter (If Equipped with Fine Filtration Filter) - Replace
320B, 320B L, 320B LN, 322B L and 322B LN Excavators Supplement
Hydraulic System Pressure Gauge (Fine Filtration Filter) - Inspect - If Equipped
320B, 320B L, 320B LN, 322B L and 322B LN Excavators Supplement
Hydraulic System Filter Element (Fine Filtration) - Replace - If Equipped
320B, 320B L, 320B LN, 322B L and 322B LN Excavators Supplement
Special Instruction
Guidelines for the Use of Clean Out Filters for the Hydraulic Oil System and for the Power Train Oil System{3067, 5068}
Guidelines for the Use of Clean Out Filters for the Hydraulic Oil System and for the Power Train Oil System{3067, 5068}
Guidelines for the Use of High Efficiency Filters for the Hydraulic Oil System and for the Power Train Oil System {3000, 3004, 5050, 5068}
Guidelines for the Use of High Efficiency Filters for the Hydraulic Oil System and for the Power Train Oil System {3000, 3004, 5050, 5068}
Technical Information Bulletin
The Oil Filter Base Assembly For The Case Drain Filter May Be Installed Incorrectly On Certain Excavators{5068, 5091}
The Oil Filter Base Assembly For The Case Drain Filter May Be Installed Incorrectly On Certain Excavators{5068, 5091}
Specifications
Pilot Oil Filter
322B, 322B L and 322B LN Excavators Machine System Specifications
Tool Operating Manual
Procedures for Using 9U-5971 and 173-9842 Filter Cart Group {0599, 0738, 5050, 5056, 5057, 5068, 5095, 7579}
Procedures for Using 9U-5971 and 173-9842 Filter Cart Group {0599, 0738, 5050, 5056, 5057, 5068, 5095, 7579}
188-3242 Filter Cart Group and 227-2479 Filter Cart Group{0374, 0599, 0680, 0738, 0768, 5050, 5056, 5095}
188-3242 Filter Cart Group and 227-2479 Filter Cart Group{0374, 0599, 0680, 0738, 0768, 5050, 5056, 5095}
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Disassembly and Assembly
Hydraulic Oil Filter Group
322B & 322B L EXCAVATORS MACHINE SYSTEMS
Service Magazine
Oil Filter Inspection Can Save Additional Internal Engine Damage{1318}
1985/06/17
New Adapters Eliminate Leaks For Hydraulic Oil Filters {5068}
1999/07/12
The Hydraulic Pilot Oil Filter Is Improved {5059, 5092, 5479}
2003/07/14
Color Coded Dust Caps for S&middot;O&middot;S Ports Will Be Available {7770}
2003/12/01
A Replacement Filter Is Incorrectly Identified {5050, 5068}
2002/12/23
Optional High Efficiency Filters Are Now Available {3004, 5068}
2003/07/07
An Enhanced Method for Determining the Pressure of the Fine Filtration System is Available {5068}
2004/07/12
An Improved Oil Filter Group for the Case Drain Filter Is Available {5056, 5068, 5091}
2007/04/02
New Oil Filters for all Cat Machines are Available {3004, 3067, 4295, 431F, 5068}
New Oil Filters for all Cat Machines are Available {3004, 3067, 4295, 431F, 5068}
Improved Design for the Quick Connector is now used {5057}
2004/04/05
Special Instruction
Modify Wiring in order to Allow Activation of the Medium Pressure Circuit When the Auxiliary Hydraulic Circuit is in the One-Way Mode{5734}
Modify Wiring in order to Allow Activation of the Medium Pressure Circuit When the Auxiliary Hydraulic Circuit is in the One-Way Mode{5734}
Service Magazine
Special Instruction, REHS0557 is Available for Modifying the Wiring on the Left Hand Joystick to Directly Control the Medium Pressure Circuit {5734}
1999/12/13
Technical Information Bulletin
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Special Instruction
New Hose Couplings Are Now Used{0684, 5057, 5057, 7554}
New Hose Couplings Are Now Used{0684, 5057, 5057, 7554}
O-Rings - Radial, Fitting Assembly O-Rings and Other O-Ring Applications {0599, 0738, 4000, 4250, 4300, 5050, 5057, 7555}
O-Rings - Radial, Fitting Assembly O-Rings and Other O-Ring Applications {0599, 0738, 4000, 4250, 4300, 5050, 5057, 7555}
Technical Information Bulletin
Auxiliary Control Pedal (4th) Is Still Active Even Though Backup Switch Is Activated In Manual Backup Mode
Auxiliary Control Pedal (4th) Is Still Active Even Though Backup Switch Is Activated In Manual Backup Mode
The Flange Head on <NOBR>442-5593</NOBR> Coupling As May Have Been Manufactured Incorrectly {5057}
The Flange Head on 442-5593 Coupling As May Have Been Manufactured Incorrectly {5057}
Tool Operating Manual
358-4528 (380/480 V, 50/60 Hz, 3 Phase), 457-6040 (230V, 60 Hz, Single Phase) , 457-6039 (230V, 50 Hz, Single Phase) Hose Machine Group Set-Up and Operation{0599, 0684}
358-4528 (380/480 V, 50/60 Hz, 3 Phase), 457-6040 (230V, 60 Hz, Single Phase) , 457-6039 (230V, 50 Hz, Single Phase) Hose Machine Group Set-Up and Operation{0599, 0684}
Crimputer III Setup and Operation{0684, 5057}
Crimputer III Setup and Operation{0684, 5057}
Crimping Caterpillar 1E294, 1E716, 1E844 Hose and Couplings {0374, 0599, 0684, 0738, 5057}
Crimping Caterpillar 1E294, 1E716, 1E844 Hose and Couplings {0374, 0599, 0684, 0738, 5057}
Using the 209-3153 Portable Hose Machine {0374, 0599, 0684, 0738, 5057}
Using the 209-3153 Portable Hose Machine {0374, 0599, 0684, 0738, 5057}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
Converting 137-7238 Hose Assembly Machines and 134-5640 Hose Assembly Machines (100 Ton) from Sony Control to Crimputer Control{0374, 0599, 0684, 5057}
Converting 137-7238 Hose Assembly Machines and 134-5640 Hose Assembly Machines (100 Ton) from Sony Control to Crimputer Control{0374, 0599, 0684, 5057}
Set up and Basic Operation of the 145-5161 Floor Model Hose Machine {0374, 0599, 0684, 0738, 5057}
Set up and Basic Operation of the 145-5161 Floor Model Hose Machine {0374, 0599, 0684, 0738, 5057}
Using the 9U-5792, 4C-5052, 4C-5054, 4C-3670, and 4C-3680 Hydraulic Hose Machines{0374, 0599, 0684, 0738, 5057}
Using the 9U-5792, 4C-5052, 4C-5054, 4C-3670, and 4C-3680 Hydraulic Hose Machines{0374, 0599, 0684, 0738, 5057}
243-0765 Bench Model Hose Machine For Use With the 242-3567 Variable Crimp Die Bowl{0374, 0599, 0684, 0738, 5057}
243-0765 Bench Model Hose Machine For Use With the 242-3567 Variable Crimp Die Bowl{0374, 0599, 0684, 0738, 5057}
Crimping Permanent Couplings Using the 136-3642 Crimp Tool Group in Combination and XT Hose Machines{0374, 0599, 0684, 5057}
Crimping Permanent Couplings Using the 136-3642 Crimp Tool Group in Combination and XT Hose Machines{0374, 0599, 0684, 5057}
Reuse And Salvage Guidelines
Crimputer III Setup and Operation{0684, 5057}
Crimputer III Setup and Operation{0684, 5057}
Contamination Control Guidelines
Hose Products Reference Guide {0374, 0599, 0684, 0738, 5057}
Hose Products Reference Guide {0374, 0599, 0684, 0738, 5057}
Disassembly and Assembly
Main Control Valve
322B & 322B L EXCAVATORS MACHINE SYSTEMS
Service Magazine
Special Instructions Are now Available For Installing Two-Way And Four-Way Pilot Valves{5051,5059}
1998/05/04
New Hose Routing In Hydraulic Auxiliary Pilot Lines Allows Operator To Relieve Pressure {5051,5057}
1999/10/25
New Protective Caps For Hose Clamps Are Now Available {5057}
2001/11/19
Information Release Memo, HOS04-02, "XT-6 Hose and Couplings to XT-6 ES Components" Is Available {5057}
2004/06/21
Information Release Memo, PELJ0340 , "Reusable Couplings for Caterpillar -12 and -16 XT-6 ES Hose" {5057}
2004/06/28
Information Release Memo, PELJ0481 , "Product Line Expansion for Caterpillar Low and Medium Pressure Hose and Coupling Products" {5057}
2005/02/21
The 6V-8633 Connector Has Changed {5057, 7553}
2005/11/28
Caterpillar Hose and Coupling Practices {0618, 1000, 5057, 7000}
2008/05/26
Specifications
Auxiliary Hydraulic Lines - Long Boom
322B Excavator Machine System Attachment Specifications
Auxiliary Hydraulic Lines - Stick 2950 mm (116.1 inch)
322B Excavator Machine System Attachment Specifications
Auxiliary Hydraulic Lines - Stick 2500 mm (98.4 inch)
322B Excavator Machine System Attachment Specifications
Auxiliary Hydraulic Lines - Stick 2000 mm (78.7 inch)
322B Excavator Machine System Attachment Specifications
Auxiliary Hydraulic Lines - Stick 2000 mm (78.7 inch)
322B Excavator Machine System Attachment Specifications
Auxiliary Hydraulic Lines - Stick 2950 mm (116.1 inch)
322B Excavator Machine System Attachment Specifications
Auxiliary Hydraulic Lines - Stick 2500 mm (98.4 inch)
322B Excavator Machine System Attachment Specifications
Service Magazine
New Hose Routing In Hydraulic Auxiliary Pilot Lines Allows Operator To Relieve Pressure {5051,5057}
1999/10/25
The 6V-8633 Connector Has Changed {5057, 7553}
2005/11/28
Service Letter-CSARL
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE TUBE ASSEMBLY OF THE MEDIUM PRESSURE CIRCUIT ON CERTAIN 320B AND 322B EXCAVATORS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE TUBE ASSEMBLY OF THE MEDIUM PRESSURE CIRCUIT ON CERTAIN 320B AND 322B EXCAVATORS
Specifications
Boom Lines
322B Excavator Machine System Attachment Specifications
Boom Lines
322B Excavator Machine System Attachment Specifications
Bucket Cylinder Lines
322B Excavator Machine System Attachment Specifications
Bucket Cylinder Lines
322B Excavator Machine System Attachment Specifications
Reuse And Salvage Guidelines
Thermal Spray Procedures for Linkage Pins {0679, 5457, 6052, 6108, 6129, 6501, 6502}
Thermal Spray Procedures for Linkage Pins {0679, 5457, 6052, 6108, 6129, 6501, 6502}
Service Magazine
The 6V-8633 Connector Has Changed {5057, 7553}
2005/11/28
The Center-Lock Hydraulic Pin Grabber Quick Couplers Have Specific Hydraulic Requirements {6129}
2010/04/15
Specifications
Boom Cylinder Lines - Left Hand
322B Excavator Machine System Attachment Specifications
Boom Cylinder Lines - Right Hand
322B Excavator Machine System Attachment Specifications
Stick Cylinder Lines
322B Excavator Machine System Attachment Specifications
Bucket Cylinder Lines
322B Excavator Machine System Attachment Specifications
Bucket Cylinder Lines
322B Excavator Machine System Attachment Specifications
Reuse And Salvage Guidelines
Thermal Spray Procedures for Linkage Pins {0679, 5457, 6052, 6108, 6129, 6501, 6502}
Thermal Spray Procedures for Linkage Pins {0679, 5457, 6052, 6108, 6129, 6501, 6502}
Specifications
Front Hydraulic Lines
322B, 322B L and 322B LN Excavators Machine System Specifications
Front Hydraulic Lines - Single Action
322B Excavator Machine System Attachment Specifications
Front Hydraulic Lines - Two Pump Flow
322B Excavator Machine System Attachment Specifications
Front Hydraulic Lines - Common Piping
322B Excavator Machine System Attachment Specifications
Special Instruction
Hose and Coupling Assembly and Repair Process Guide{0684, 3016, 3103, 3154, 4133, 4257, 4304, 5057, 7554}
Hose and Coupling Assembly and Repair Process Guide{0684, 3016, 3103, 3154, 4133, 4257, 4304, 5057, 7554}
New Hose Couplings Are Now Used{0684, 5057, 5057, 7554}
New Hose Couplings Are Now Used{0684, 5057, 5057, 7554}
O-Rings - Radial, Fitting Assembly O-Rings and Other O-Ring Applications {0599, 0738, 4000, 4250, 4300, 5050, 5057, 7555}
O-Rings - Radial, Fitting Assembly O-Rings and Other O-Ring Applications {0599, 0738, 4000, 4250, 4300, 5050, 5057, 7555}
Service Letter-NACD
Product Support Program For Replacing The Leaking Oil Cooler On Certain 320B, 322B, 325B And 330B Excavators
Product Support Program For Replacing The Leaking Oil Cooler On Certain 320B, 322B, 325B And 330B Excavators
Service Letter-CSARL
Service Letter-Americas
Technical Information Bulletin
Auxiliary Control Pedal (4th) Is Still Active Even Though Backup Switch Is Activated In Manual Backup Mode
Auxiliary Control Pedal (4th) Is Still Active Even Though Backup Switch Is Activated In Manual Backup Mode
Some Hydraulic Couplings are Identified with an Incorrect Part Number{5057}
Some Hydraulic Couplings are Identified with an Incorrect Part Number{5057}
The Flange Head on <NOBR>442-5593</NOBR> Coupling As May Have Been Manufactured Incorrectly {5057}
The Flange Head on 442-5593 Coupling As May Have Been Manufactured Incorrectly {5057}
Specifications
Front Hydraulic Lines
322B, 322B L and 322B LN Excavators Machine System Specifications
Tool Operating Manual
358-4528 (380/480 V, 50/60 Hz, 3 Phase), 457-6040 (230V, 60 Hz, Single Phase) , 457-6039 (230V, 50 Hz, Single Phase) Hose Machine Group Set-Up and Operation{0599, 0684}
358-4528 (380/480 V, 50/60 Hz, 3 Phase), 457-6040 (230V, 60 Hz, Single Phase) , 457-6039 (230V, 50 Hz, Single Phase) Hose Machine Group Set-Up and Operation{0599, 0684}
Crimputer III Setup and Operation{0684, 5057}
Crimputer III Setup and Operation{0684, 5057}
242-3567 Variable Crimp Die Bowl{0684}
242-3567 Variable Crimp Die Bowl{0684}
Crimping Caterpillar 1E294, 1E716, 1E844 Hose and Couplings {0374, 0599, 0684, 0738, 5057}
Crimping Caterpillar 1E294, 1E716, 1E844 Hose and Couplings {0374, 0599, 0684, 0738, 5057}
Using the 209-3153 Portable Hose Machine {0374, 0599, 0684, 0738, 5057}
Using the 209-3153 Portable Hose Machine {0374, 0599, 0684, 0738, 5057}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
Converting 137-7238 Hose Assembly Machines and 134-5640 Hose Assembly Machines (100 Ton) from Sony Control to Crimputer Control{0374, 0599, 0684, 5057}
Converting 137-7238 Hose Assembly Machines and 134-5640 Hose Assembly Machines (100 Ton) from Sony Control to Crimputer Control{0374, 0599, 0684, 5057}
Set up and Basic Operation of the 145-5161 Floor Model Hose Machine {0374, 0599, 0684, 0738, 5057}
Set up and Basic Operation of the 145-5161 Floor Model Hose Machine {0374, 0599, 0684, 0738, 5057}
Using the 9U-5792, 4C-5052, 4C-5054, 4C-3670, and 4C-3680 Hydraulic Hose Machines{0374, 0599, 0684, 0738, 5057}
Using the 9U-5792, 4C-5052, 4C-5054, 4C-3670, and 4C-3680 Hydraulic Hose Machines{0374, 0599, 0684, 0738, 5057}
Reuse And Salvage Guidelines
Crimputer III Setup and Operation{0684, 5057}
Crimputer III Setup and Operation{0684, 5057}
Contamination Control Guidelines
Hose Products Reference Guide {0374, 0599, 0684, 0738, 5057}
Hose Products Reference Guide {0374, 0599, 0684, 0738, 5057}
Disassembly and Assembly
Engine &amp; Main Hydraulic Pump
SUPPLEMENT FOR 322B & 322B L EXCAVATORS - 3116 ENGINE
Hydraulic Oil Cooler
SUPPLEMENT FOR 322B & 322B L EXCAVATORS - 3116 ENGINE
Main Control Valve
322B & 322B L EXCAVATORS MACHINE SYSTEMS
Service Magazine
Special Instructions Are now Available For Installing Two-Way And Four-Way Pilot Valves{5051,5059}
1998/05/04
New Shuttle Valves Installed In Boom Hydraulic Circuit At Main Control Valve On Excavators With An Auxiliary Circuit {5057,5059}
1999/04/12
New Hose Routing In Hydraulic Auxiliary Pilot Lines Allows Operator To Relieve Pressure {5051,5057}
1999/10/25
Color Coded Dust Caps for S&middot;O&middot;S Ports Will Be Available {7770}
2003/12/01
Information Release Memo, HOS04-02, "XT-6 Hose and Couplings to XT-6 ES Components" Is Available {5057}
2004/06/21
Information Release Memo, PELJ0340 , "Reusable Couplings for Caterpillar -12 and -16 XT-6 ES Hose" {5057}
2004/06/28
Five New Wrenches Remove Snap To Connect Couplings from Hydraulic Hose Assemblies {0602, 0738, 5057}
2006/02/13
Caterpillar Hose and Coupling Practices {0618, 1000, 5057, 7000}
2008/05/26
Hydraulic Hose Suppression Sleeves for Certain Machines are Now Available {5057}
Hydraulic Hose Suppression Sleeves for Certain Machines are Now Available {5057}
Service Letter-NACD
A Pilot Drain Hose Will Need To Be Relocated To The Smartboom Disable Switch On Certain 320B, 322B, 325B, 330B And 345B Excavators
A Pilot Drain Hose Will Need To Be Relocated To The Smartboom Disable Switch On Certain 320B, 322B, 325B, 330B And 345B Excavators
Service Letter-CSARL
Technical Information Bulletin
The Flange Head on <NOBR>442-5593</NOBR> Coupling As May Have Been Manufactured Incorrectly {5057}
The Flange Head on 442-5593 Coupling As May Have Been Manufactured Incorrectly {5057}
Specifications
Front Pilot Lines
322B, 322B L and 322B LN Excavators Machine System Specifications
Rear Pilot Lines
322B, 322B L and 322B LN Excavators Machine System Specifications
Pilot Hydraulic Lines - Flow Control
322B Excavator Machine System Attachment Specifications
Pilot Hydraulic Lines - Logic
322B Excavator Machine System Attachment Specifications
Pilot Hydraulic Lines - Boom Lowering Control Device
322B Excavator Machine System Attachment Specifications
Pilot Hydraulic Lines - Two Pump Flow
322B Excavator Machine System Attachment Specifications
Pilot Hydraulic Lines - Stick Lowering Control
322B Excavator Machine System Attachment Specifications
Service Magazine
Pump Control Pilot Lines Improved {5058}
1998/01/26
New Hose Routing In Hydraulic Auxiliary Pilot Lines Allows Operator To Relieve Pressure {5051,5057}
1999/10/25
A New Pressure Switch Improves the Reliability of the Automatic Engine Speed Control {5057, 5059}
2008/07/14
Technical Information Bulletin
The Flange Head on <NOBR>442-5593</NOBR> Coupling As May Have Been Manufactured Incorrectly {5057}
The Flange Head on 442-5593 Coupling As May Have Been Manufactured Incorrectly {5057}
Specifications
Pump Lines
322B, 322B L and 322B LN Excavators Machine System Specifications
Disassembly and Assembly
Engine &amp; Main Hydraulic Pump
SUPPLEMENT FOR 322B & 322B L EXCAVATORS - 3116 ENGINE
Service Magazine
New Gauge Block Set Available For Rebuilding Of Hydraulic Pumps and Motors{0733,0738,0763,4351,5070,5058}
1997/07/28
Pump Control Pilot Lines Improved {5058}
1998/01/26
Technical Information Bulletin
The Check Valve Group In The Hydraulic Return And Filter Lines Group Has A Valve Assembly That May Loosen
The Check Valve Group In The Hydraulic Return And Filter Lines Group Has A Valve Assembly That May Loosen
Specifications
Return Lines
322B, 322B L and 322B LN Excavators Machine System Specifications
Filter and Return Hydraulic Lines - Boom Lowering Control Device
322B Excavator Machine System Attachment Specifications
Service Magazine
The Hydraulic Hoses in the Return Lines Group Are Improved {5057}
2004/04/12
Service Letter-CSARL
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE TUBE ASSEMBLY OF THE MEDIUM PRESSURE CIRCUIT ON CERTAIN 320B AND 322B EXCAVATORS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE TUBE ASSEMBLY OF THE MEDIUM PRESSURE CIRCUIT ON CERTAIN 320B AND 322B EXCAVATORS
Specifications
Stick Lines
322B Excavator Machine System Attachment Specifications
Stick Lines
322B Excavator Machine System Attachment Specifications
Stick Lines
322B Excavator Machine System Attachment Specifications
Stick Cylinder Lines
322B Excavator Machine System Attachment Specifications
Service Magazine
The 6V-8633 Connector Has Changed {5057, 7553}
2005/11/28
Specifications
Swing Motor Lines
322B, 322B L and 322B LN Excavators Machine System Specifications
Travel Motor Lines
322B, 322B L and 322B LN Excavators Machine System Specifications
Operation and Maintenance Manual
Hydraulic Oil
320B, 322B and 325B Excavators
Hydraulic System Oil Sample - Obtain
320B, 322B and 325B Excavators
Special Instruction
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
Service Magazine
Oil Filter Inspection Can Save Additional Internal Engine Damage{1318}
1985/06/17
Canister Size Of Coolant Conditioner Element Has Changed{1350}
1985/11/25
Special Instruction
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Test Specifications for Vane Cartridges{0784, 5058, 5070}
Test Specifications for Vane Cartridges{0784, 5058, 5070}
The Remanufactured Swing Motor is Shipped With Plugs in the Relief Valve Ports{5058}
The Remanufactured Swing Motor is Shipped With Plugs in the Relief Valve Ports{5058}
Specifications
Swing Motor
322B, 322B L and 322B LN Excavators Machine System Specifications
Travel Motor Guard - Heavy-Duty
322B, 322B L and 322B LN Excavators Machine System Specifications
Travel Motor
322B, 322B L and 322B LN Excavators Machine System Specifications
Tool Operating Manual
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
Reuse And Salvage Guidelines
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 9, 10, and 11) {5061, 506G, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 9, 10, and 11) {5061, 506G, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070}
General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070}
Testing and Adjusting
Swing Motor - Test - Measurement of Case Drain Oil
322B Excavator Hydraulic System
Travel Motor - Test - Measurement of Case Drain Oil
322B Excavator Hydraulic System
Relief Valve (Travel Motor) - Test and Adjust
322B Excavator Hydraulic System
Bench Test Procedures
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Bench Test Procedure for Hydraulic Piston Motors{4351, 5058}
Bench Test Procedure for Hydraulic Piston Motors{4351, 5058}
Disassembly and Assembly
Travel Motors
322B & 322B L EXCAVATORS MACHINE SYSTEMS
Swing Motor
322B & 322B L EXCAVATORS MACHINE SYSTEMS
Service Magazine
New Gauge Block Set Available For Rebuilding Of Hydraulic Pumps and Motors{0733,0738,0763,4351,5070,5058}
1997/07/28
Pump Control Pilot Lines Improved {5058}
1998/01/26
Travel Motor Improvements Enhance Dependability {4351,5058}
1999/03/08
New Piston Motors Increase the Reliability of the Travel Motor {5058}
2009/05/04
Proper Operation of Swing Function Will Prevent Damage to the Swing Motor and the Bearings in the Swing Drive {5459, 7063, 79PA}
2006/03/27
Special Instructions Are now Available For Installing Two-Way And Four-Way Pilot Valves{5051,5059}
1998/05/04
Special Instruction
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Nexus Gear Pump Porting{5073}
Nexus Gear Pump Porting{5073}
Repair Process for Hydraulic Gear Pumps {5073}
Repair Process for Hydraulic Gear Pumps {5073}
Test Specifications for Vane Cartridges{0784, 5058, 5070}
Test Specifications for Vane Cartridges{0784, 5058, 5070}
Specifications
Main Hydraulic Pump
322B, 322B L and 322B LN Excavators Machine System Specifications
Tool Operating Manual
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
Systems Operation
Auxiliary Control (Pump Flow)
320B, 322B, 325B and 330B Excavators Attachment Hydraulic System
Auxiliary Control (Hammer Mode)
320B, 322B, 325B and 330B Excavators Attachment Hydraulic System
Auxiliary Control (Medium Pressure Circuit)
320B, 322B, 325B and 330B Excavators Attachment Hydraulic System
Reuse And Salvage Guidelines
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Vane Type Hydraulic Pumps {5055}
Vane Type Hydraulic Pumps {5055}
Repair Process for Hydraulic Gear Pumps {5073}
Repair Process for Hydraulic Gear Pumps {5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 9, 10, and 11) {5061, 506G, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 9, 10, and 11) {5061, 506G, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Removing and Installing Bushings and Pressure Plates in Hydraulic Gear Pumps {5073}
Removing and Installing Bushings and Pressure Plates in Hydraulic Gear Pumps {5073}
General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070}
General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070}
Testing and Adjusting
Piston Pump (Main) - Purge
320B, 322B, 325B and 330B Excavators Attachment Hydraulic System
Auxiliary Control (Pump Flow) - Test and Reprogram
320B, 322B, 325B and 330B Excavators Attachment Hydraulic System
Pump Control (Negative Flow) - Adjust
322B Excavator Hydraulic System
Pump Control (Output Flow) - Adjust
322B Excavator Hydraulic System
Gear Pump (Pilot) - Test
322B Excavator Hydraulic System
Pump Control (Negative Flow) - Test
322B Excavator Hydraulic System
Piston Pump (Main) - Test
322B Excavator Hydraulic System
Main Hydraulic Pump Air - Purge
320B, 322B, 325B, 330B, 345B and 345B Series II Excavators Auxiliary Hydraulic System
Bench Test Procedures
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Bench Test Procedure for Hydraulic Piston Pumps{5070}
Bench Test Procedure for Hydraulic Piston Pumps{5070}
Bench Test Procedure for Gear Pumps {5073}
Bench Test Procedure for Gear Pumps {5073}
Bench Test Procedure for Vane Pumps {5055}
Bench Test Procedure for Vane Pumps {5055}
Disassembly and Assembly
Engine &amp; Main Hydraulic Pump
SUPPLEMENT FOR 322B & 322B L EXCAVATORS - 3116 ENGINE
Main Hydraulic Pump &amp; Pump Drive Coupling
322B & 322B L EXCAVATORS MACHINE SYSTEMS
Main Hydraulic Pump
322B & 322B L EXCAVATORS MACHINE SYSTEMS
Service Magazine
New Gauge Block Set Available For Rebuilding Of Hydraulic Pumps and Motors{0733,0738,0763,4351,5070,5058}
1997/07/28
Pump Control Pilot Lines Improved {5058}
1998/01/26
Correct the Flow Meter Tool Layout in Systems Operation/Testing and Adjusting, RENR1020 {5050}
1999/12/06
The Main Hydraulic Pump Regulator Is Improved {3222}
2000/11/06
The Specifications Are Identified For Auxiliary Hydraulic Pumps {3108, 5073}
2002/02/04
Cover Plate, Flange are Available for Use During Flow Tests on the Main Hydraulic Pumps {0738, 5070, 5084}
2005/04/25
New Metering Pump Groups For Steering Control Prevent Oil Leaks {4300, 4301, 4312}
2010/08/19
Disassembly and Assembly
Swivel Joint
322B & 322B L EXCAVATORS MACHINE SYSTEMS
Service Magazine
New High Temperature Seals For The Swivel Groups Improve Reliability {5060}
1999/08/02
New High Temperature Seals For The Swivel Groups Improve Reliability {5060}
1999/11/01
An Upgraded Seal for the Swivel Group Is Available {5060}
2004/05/31
Operation and Maintenance Manual
Hydraulic System Oil Return Filter - Replace
320B, 322B and 325B Excavators
Hydraulic System Oil - Change
320B, 322B and 325B Excavators
Hydraulic System Oil Level - Check
320B, 322B and 325B Excavators
Technical Information Bulletin
Check For Correct Operation Of Oil Level Switch
Check For Correct Operation Of Oil Level Switch
Specifications
Hydraulic Tank and Return Filter
322B, 322B L and 322B LN Excavators Machine System Specifications
Tool Operating Manual
204-7392 (Air Motor Driven) Filter Cart {0645, 0680, 0738, 5056, 5068}
204-7392 (Air Motor Driven) Filter Cart {0645, 0680, 0738, 5056, 5068}
Procedures for Using 9U-5971 and 173-9842 Filter Cart Group {0599, 0738, 5050, 5056, 5057, 5068, 5095, 7579}
Procedures for Using 9U-5971 and 173-9842 Filter Cart Group {0599, 0738, 5050, 5056, 5057, 5068, 5095, 7579}
Procedures For Using: 127-8781 Transfer Filter Cart , old 9U-7361 (110V, 60 hz), 169-7159 Transfer Filter Cart , old 127-8782 (220V, 50 hz) CE, 174-9158 Transfer Filter Cart , old 129-0849 (Air Motor Driven){0374, 0599, 0680, 0738}
Procedures For Using: 127-8781 Transfer Filter Cart , old 9U-7361 (110V, 60 hz), 169-7159 Transfer Filter Cart , old 127-8782 (220V, 50 hz) CE, 174-9158 Transfer Filter Cart , old 129-0849 (Air Motor Driven){0374, 0599, 0680, 0738}
Procedure for Using 173-8839 Fluid Storage Filter Cart {0113, 0374, 0599, 0680, 0738, 7579}
Procedure for Using 173-8839 Fluid Storage Filter Cart {0113, 0374, 0599, 0680, 0738, 7579}
188-3242 Filter Cart Group and 227-2479 Filter Cart Group{0374, 0599, 0680, 0738, 0768, 5050, 5056, 5095}
188-3242 Filter Cart Group and 227-2479 Filter Cart Group{0374, 0599, 0680, 0738, 0768, 5050, 5056, 5095}
Reuse And Salvage Guidelines
Filtration Times for Caterpillar Machine Fluid Compartments{0680, 0738, 0768, 3080, 5050, 5056, 5095}
Filtration Times for Caterpillar Machine Fluid Compartments{0680, 0738, 0768, 3080, 5050, 5056, 5095}
Contamination Control Guidelines
Procedure for Filtering <NOBR> 9U-5000</NOBR> Hydraulic Test Bench Hydraulic Oil {0680, 0738, 0768, 0784, 5050, 5056}
Procedure for Filtering 9U-5000 Hydraulic Test Bench Hydraulic Oil {0680, 0738, 0768, 0784, 5050, 5056}
Filtration Procedure for Excavator Hydraulic Oil {0680, 0768, 5050, 5056}
Filtration Procedure for Excavator Hydraulic Oil {0680, 0768, 5050, 5056}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Filtration Times for Caterpillar Machine Fluid Compartments{0680, 0738, 0768, 3080, 5050, 5056, 5095}
Filtration Times for Caterpillar Machine Fluid Compartments{0680, 0738, 0768, 3080, 5050, 5056, 5095}
Basic Principles of Kidney Loop Filtering Hydraulic Fluid Systems {0680, 0768, 5050, 5056}
Basic Principles of Kidney Loop Filtering Hydraulic Fluid Systems {0680, 0768, 5050, 5056}
Disassembly and Assembly
Hydraulic Oil Tank
322B & 322B L EXCAVATORS MACHINE SYSTEMS
Service Magazine
Change to the Procedure for the Release of System Hydraulic Pressure {5056, 5095}
2000/03/13
A New Hydraulic Oil Filter Element is Available for Extreme Dust Conditions {5068}
2000/11/20
The Oil Level Switch for the Engine Oil and for the Hydraulic Oil Is Improved {1302, 5056, 7422}
2002/11/11
Improved Sight Gauges for the Hydraulic Tank and for the Fuel Tank Have Increased Durability {1273, 5056, 7479}
2003/12/08
Single Element and Multiple Element Filter Heads are Available for Customized Systems {0738}
2004/03/29
An Enhanced Method for Determining the Pressure of the Fine Filtration System is Available {5068}
2004/07/12
A New Strainer Assembly For the Hydraulic Tank Is Now Available {5056, 5068}
2013/09/02
Welding On Fuel And Hydraulic Tanks {0353, 0679, 1273, 5056, 7000}
2005/12/19
Proper Identification of Ports on 5P-0306 Vacuum Transducer {0768, 5050, 5056}
2006/01/23
Portable Test and Fill Machine Designed for a Service Vehicle but Works Fast Enough for the Shop {0768}
2006/02/27
Spanner Wrench is Available for Ecology Drain Valves {1302, 1353, 1372, 5076, 5613}
2006/03/20
An Improved Oil Filter Group for the Case Drain Filter Is Available {5056, 5068, 5091}
2007/04/02
Truck Engine News
Single Purpose Fluid Sampling Valves and Dual Purpose Fluid Sampling Valves Require Different Quick Connect Couplers {0645, 7542}
2004/12/01
Portable Contamination Monitor Group Provides a Lower Cost Alternative to Particle Counting {0781, 0784, 0786, 1300, 5050}
2004/12/01
Changes to the Usage and Cleaning of the Contamination Monitor Group {0784, 5050}
2010/10/01
Engine News
Single Purpose Fluid Sampling Valves and Dual Purpose Fluid Sampling Valves Require Different Quick Connect Couplers {0645, 7542}
2004/12/01
Portable Contamination Monitor Group Provides a Lower Cost Alternative to Particle Counting {0781, 0784, 0786, 1300, 5050}
2004/12/01
Changes to the Usage and Cleaning of the Contamination Monitor Group {0784, 5050}
2010/09/10
Special Instruction
Test Specifications for Vane Cartridges{0784, 5058, 5070}
Test Specifications for Vane Cartridges{0784, 5058, 5070}
Operating Instructions for Cat 1U-9400 Series Hydraulic Test Center {0784}
Operating Instructions for Cat 1U-9400 Series Hydraulic Test Center {0784}
Accumulator Discharging and Charging Procedures {0738, 4263, 4264, 4331, 5077, 5077, 5081, 7474}
Accumulator Discharging and Charging Procedures {0738, 4263, 4264, 4331, 5077, 5077, 5081, 7474}
Lip Type Seals {0599, 0733, 5050, 7555}
Lip Type Seals {0599, 0733, 5050, 7555}
Hose Inspection Form {0374, 0599, 5057, 5057}
Hose Inspection Form {0374, 0599, 5057, 5057}
Technical Information Bulletin
Updated Ride Control Accumulator Test and Charge Instructions{0738, 5004, 5077, 5081, 7474}
Updated Ride Control Accumulator Test and Charge Instructions{0738, 5004, 5077, 5081, 7474}
Tool Operating Manual
358-4528 (380/480 V, 50/60 Hz, 3 Phase), 457-6040 (230V, 60 Hz, Single Phase) , 457-6039 (230V, 50 Hz, Single Phase) Hose Machine Group Set-Up and Operation{0599, 0684}
358-4528 (380/480 V, 50/60 Hz, 3 Phase), 457-6040 (230V, 60 Hz, Single Phase) , 457-6039 (230V, 50 Hz, Single Phase) Hose Machine Group Set-Up and Operation{0599, 0684}
Crimputer III Setup and Operation{0684, 5057}
Crimputer III Setup and Operation{0684, 5057}
242-3567 Variable Crimp Die Bowl{0684}
242-3567 Variable Crimp Die Bowl{0684}
Using the 198-4240 Digital Pressure Indicator Group{0599, 0738, 0788, 1000, 3000, 4000, 5000, 6000}
Using the 198-4240 Digital Pressure Indicator Group{0599, 0738, 0788, 1000, 3000, 4000, 5000, 6000}
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
Crimping Caterpillar 1E294, 1E716, 1E844 Hose and Couplings {0374, 0599, 0684, 0738, 5057}
Crimping Caterpillar 1E294, 1E716, 1E844 Hose and Couplings {0374, 0599, 0684, 0738, 5057}
Using the 209-3153 Portable Hose Machine {0374, 0599, 0684, 0738, 5057}
Using the 209-3153 Portable Hose Machine {0374, 0599, 0684, 0738, 5057}
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
Base-Mounted Recirculating Parts Washers{0374, 0599, 0680, 0699, 0700}
Base-Mounted Recirculating Parts Washers{0374, 0599, 0680, 0699, 0700}
204-7392 (Air Motor Driven) Filter Cart {0645, 0680, 0738, 5056, 5068}
204-7392 (Air Motor Driven) Filter Cart {0645, 0680, 0738, 5056, 5068}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
9U-5000 Series Hydraulic Test Bench {0599, 0738}
9U-5000 Series Hydraulic Test Bench {0599, 0738}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9437 Portable Hydraulic Tester , 1U-8761 Portable Hydraulic Tester (Canceled), 4C-9675 Portable Hydraulic Tester , 1U-9951 Portable Hydraulic Tester (Canceled){0599, 0738}
4C-9437 Portable Hydraulic Tester , 1U-8761 Portable Hydraulic Tester (Canceled), 4C-9675 Portable Hydraulic Tester , 1U-9951 Portable Hydraulic Tester (Canceled){0599, 0738}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Procedures for Using 9U-5971 and 173-9842 Filter Cart Group {0599, 0738, 5050, 5056, 5057, 5068, 5095, 7579}
Procedures for Using 9U-5971 and 173-9842 Filter Cart Group {0599, 0738, 5050, 5056, 5057, 5068, 5095, 7579}
Procedures For Using: 127-8781 Transfer Filter Cart , old 9U-7361 (110V, 60 hz), 169-7159 Transfer Filter Cart , old 127-8782 (220V, 50 hz) CE, 174-9158 Transfer Filter Cart , old 129-0849 (Air Motor Driven){0374, 0599, 0680, 0738}
Procedures For Using: 127-8781 Transfer Filter Cart , old 9U-7361 (110V, 60 hz), 169-7159 Transfer Filter Cart , old 127-8782 (220V, 50 hz) CE, 174-9158 Transfer Filter Cart , old 129-0849 (Air Motor Driven){0374, 0599, 0680, 0738}
Procedure for Using 173-8839 Fluid Storage Filter Cart {0113, 0374, 0599, 0680, 0738, 7579}
Procedure for Using 173-8839 Fluid Storage Filter Cart {0113, 0374, 0599, 0680, 0738, 7579}
Converting 137-7238 Hose Assembly Machines and 134-5640 Hose Assembly Machines (100 Ton) from Sony Control to Crimputer Control{0374, 0599, 0684, 5057}
Converting 137-7238 Hose Assembly Machines and 134-5640 Hose Assembly Machines (100 Ton) from Sony Control to Crimputer Control{0374, 0599, 0684, 5057}
146-1738 Precision Borescope (Hawkeye){0599, 0614, 0644, 0701, 0706, 0708, 0727, 0738}
146-1738 Precision Borescope (Hawkeye){0599, 0614, 0644, 0701, 0706, 0708, 0727, 0738}
TT5000 to TT7000 Torque Turn Wrench Conversion{0374, 0599, 0602, 0677, 79NY}
TT5000 to TT7000 Torque Turn Wrench Conversion{0374, 0599, 0602, 0677, 79NY}
Set up and Basic Operation of the 145-5161 Floor Model Hose Machine {0374, 0599, 0684, 0738, 5057}
Set up and Basic Operation of the 145-5161 Floor Model Hose Machine {0374, 0599, 0684, 0738, 5057}
Using the 164-2691 Printer Group {0374, 0599, 0684, 5057}
Using the 164-2691 Printer Group {0374, 0599, 0684, 5057}
420-2048 Adjustable C-Frame Assembly{0629, 0632, 0738, 4000, 5050, 7000}
420-2048 Adjustable C-Frame Assembly{0629, 0632, 0738, 4000, 5050, 7000}
HVOF Identifier 396-9342 Group{0599, 0669, 0679, 7000}
HVOF Identifier 396-9342 Group{0599, 0669, 0679, 7000}
4-Inch Radial Hose Machine{0374, 0599, 0684, 0738, 5057}
4-Inch Radial Hose Machine{0374, 0599, 0684, 0738, 5057}
188-3242 Filter Cart Group and 227-2479 Filter Cart Group{0374, 0599, 0680, 0738, 0768, 5050, 5056, 5095}
188-3242 Filter Cart Group and 227-2479 Filter Cart Group{0374, 0599, 0680, 0738, 0768, 5050, 5056, 5095}
Procedures for Using the 212-1503 Portable Parts Washer{0374, 0599, 0680, 0699, 0700}
Procedures for Using the 212-1503 Portable Parts Washer{0374, 0599, 0680, 0699, 0700}
Using the 9U-5792, 4C-5052, 4C-5054, 4C-3670, and 4C-3680 Hydraulic Hose Machines{0374, 0599, 0684, 0738, 5057}
Using the 9U-5792, 4C-5052, 4C-5054, 4C-3670, and 4C-3680 Hydraulic Hose Machines{0374, 0599, 0684, 0738, 5057}
Using the 223-2105 Hose Cutting Machine{0374, 0599, 0678, 0684, 0708, 0738, 5057, 6060}
Using the 223-2105 Hose Cutting Machine{0374, 0599, 0678, 0684, 0708, 0738, 5057, 6060}
Crimping XT-3 ES and XT-5 S4G, MCSH, and MCSX Couplings Using 4C-3660, 4C-5052, 4C-5053, 9U-5792, or 9U-7261 Hose Machines{0374, 0599, 0684, 0738, 5057}
Crimping XT-3 ES and XT-5 S4G, MCSH, and MCSX Couplings Using 4C-3660, 4C-5052, 4C-5053, 9U-5792, or 9U-7261 Hose Machines{0374, 0599, 0684, 0738, 5057}
243-0765 Bench Model Hose Machine For Use With the 242-3567 Variable Crimp Die Bowl{0374, 0599, 0684, 0738, 5057}
243-0765 Bench Model Hose Machine For Use With the 242-3567 Variable Crimp Die Bowl{0374, 0599, 0684, 0738, 5057}
Crimping Permanent Couplings Using the 136-3642 Crimp Tool Group in Combination and XT Hose Machines{0374, 0599, 0684, 5057}
Crimping Permanent Couplings Using the 136-3642 Crimp Tool Group in Combination and XT Hose Machines{0374, 0599, 0684, 5057}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Installing 457-6030 (C3-290 Controller) on Hose Crimping Machines 233-8048, 286-4354, 286-4355, 275-6199, 286-4353, and 233-8038{0374, 0599, 0684, 0700, 0738, 5057}
Installing 457-6030 (C3-290 Controller) on Hose Crimping Machines 233-8048, 286-4354, 286-4355, 275-6199, 286-4353, and 233-8038{0374, 0599, 0684, 0700, 0738, 5057}
NEHS1214: 455-0126 Nitrogen Booster Pump Group {0374, 0599, 0647, 0756, 4263, 4331, 5077, 7200}
NEHS1214: 455-0126 Nitrogen Booster Pump Group {0374, 0599, 0647, 0756, 4263, 4331, 5077, 7200}
Base Mounted Recirculating Parts Washers {0374, 0599, 0680, 0699, 0700}
Base Mounted Recirculating Parts Washers {0374, 0599, 0680, 0699, 0700}
Reuse And Salvage Guidelines
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Filtration Times for Caterpillar Machine Fluid Compartments{0680, 0738, 0768, 3080, 5050, 5056, 5095}
Filtration Times for Caterpillar Machine Fluid Compartments{0680, 0738, 0768, 3080, 5050, 5056, 5095}
Crimputer III Setup and Operation{0684, 5057}
Crimputer III Setup and Operation{0684, 5057}
Contamination Control Guidelines
Procedure for Filtering <NOBR> 9U-5000</NOBR> Hydraulic Test Bench Hydraulic Oil {0680, 0738, 0768, 0784, 5050, 5056}
Procedure for Filtering 9U-5000 Hydraulic Test Bench Hydraulic Oil {0680, 0738, 0768, 0784, 5050, 5056}
Filtration Procedure for Excavator Hydraulic Oil {0680, 0768, 5050, 5056}
Filtration Procedure for Excavator Hydraulic Oil {0680, 0768, 5050, 5056}
Procedure for Operating Caterpillar Filter Carts {0680, 0768, 5050}
Procedure for Operating Caterpillar Filter Carts {0680, 0768, 5050}
Filtration Times for Caterpillar Machine Fluid Compartments{0680, 0738, 0768, 3080, 5050, 5056, 5095}
Filtration Times for Caterpillar Machine Fluid Compartments{0680, 0738, 0768, 3080, 5050, 5056, 5095}
Hose Products Reference Guide {0374, 0599, 0684, 0738, 5057}
Hose Products Reference Guide {0374, 0599, 0684, 0738, 5057}
Basic Principles of Kidney Loop Filtering Hydraulic Fluid Systems {0680, 0768, 5050, 5056}
Basic Principles of Kidney Loop Filtering Hydraulic Fluid Systems {0680, 0768, 5050, 5056}
Bench Test Procedures
Required Tooling for Bench Testing Hydraulic Components {0784, 4000, 4005, 4129, 4250, 4300, 5050}
Required Tooling for Bench Testing Hydraulic Components {0784, 4000, 4005, 4129, 4250, 4300, 5050}
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Service Magazine
Black Light Leak Detection Kit Available For Oil, Fuel and Cooling Systems {0774,1250,1300,1350}
1987/05/11
Extraction Tools For &quot;Live Oil Sampling&quot;{7770,0770,0781,0783,0784}
1988/04/18
Installation Of Valves For Live Oil Sampling{7770,0770,0781,0783,0784}
1988/06/06
New Gauge Block Set Available For Rebuilding Of Hydraulic Pumps and Motors{0733,0738,0763,4351,5070,5058}
1997/07/28
Use 136-7205 Extension Cable For Monitors{0740,0779}
1998/03/09
Boom Cylinder Link Assemblies Support Implement During Service {0635, 0738}
2004/03/08
New Hydraulic Hose Assembly Machine Integrates Crimputer II with Radial Crimping Technology {0738}
2004/05/03
Single Element and Multiple Element Filter Heads are Available for Customized Systems {0738}
2004/03/29
Hose Kit Helps the Technician Properly Prepare Hydraulic Hose for Assembly {0684}
2004/05/31
243-3133 Quick Connect Coupler (Fluid Sampling) Provides A Coupler for Portable Particle Analyzers {0707, 0717, 0731, 0732, 0738}
2004/07/01
Test Kit Checks Oil Coolers for Leaks {0768, 0781, 0783, 0784}
2004/12/27
Single Purpose Fluid Sampling Valves and Dual Purpose Fluid Sampling Valves Require Different Quick Connect Couplers {0645, 7542}
2004/12/01
Portable Contamination Monitor Group Provides a Lower Cost Alternative to Particle Counting {0781, 0784, 0786, 1300, 5050}
2004/12/01
Cover Plate, Flange are Available for Use During Flow Tests on the Main Hydraulic Pumps {0738, 5070, 5084}
2005/04/25
Remove Certain 6D-7726 Hose Assemblies from Inventory {0738}
2005/12/12
Five New Wrenches Remove Snap To Connect Couplings from Hydraulic Hose Assemblies {0602, 0738, 5057}
2006/02/13
Proper Identification of Ports on 5P-0306 Vacuum Transducer {0768, 5050, 5056}
2006/01/23
Portable Test and Fill Machine Designed for a Service Vehicle but Works Fast Enough for the Shop {0768}
2006/02/27
Spanner Wrench is Available for Ecology Drain Valves {1302, 1353, 1372, 5076, 5613}
2006/03/20
Technical Information Bulletin
Auxiliary Control Pedal (4th) Is Still Active Even Though Backup Switch Is Activated In Manual Backup Mode
Auxiliary Control Pedal (4th) Is Still Active Even Though Backup Switch Is Activated In Manual Backup Mode
Disassembly and Assembly
Main Control Valve
322B & 322B L EXCAVATORS MACHINE SYSTEMS
Service Magazine
Special Instructions Are now Available For Installing Two-Way And Four-Way Pilot Valves{5051,5059}
1998/05/04
New Hose Routing In Hydraulic Auxiliary Pilot Lines Allows Operator To Relieve Pressure {5051,5057}
1999/10/25
Service Letter-NACD
PRODUCT SUPPORT PROGRAM FOR REPLACING THE SOLENOID VALVE ON CERTAIN 312B, 315B, 317B, 318B, 320B, 322B, 325B, 330B AND 345B EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE SOLENOID VALVE ON CERTAIN 312B, 315B, 317B, 318B, 320B, 322B, 325B, 330B AND 345B EXCAVATORS
Service Letter-CSARL
Service Letter-Americas
Technical Information Bulletin
Auxiliary Control Pedal (4th) Is Still Active Even Though Backup Switch Is Activated In Manual Backup Mode
Auxiliary Control Pedal (4th) Is Still Active Even Though Backup Switch Is Activated In Manual Backup Mode
Specifications
Travel Brake Valve
322B, 322B L and 322B LN Excavators Machine System Specifications
Disassembly and Assembly
Main Control Valve
322B & 322B L EXCAVATORS MACHINE SYSTEMS
Service Magazine
Special Instructions Are now Available For Installing Two-Way And Four-Way Pilot Valves{5051,5059}
1998/05/04
New Hose Routing In Hydraulic Auxiliary Pilot Lines Allows Operator To Relieve Pressure {5051,5057}
1999/10/25
Special Instruction
Procedure to Adjust the Hydraulic Auxiliary Circuit for Hydraulic Hammer Operation{5050}
Procedure to Adjust the Hydraulic Auxiliary Circuit for Hydraulic Hammer Operation{5050}
Service Magazine
Correction to Service Manual , "Hydraulic System (Attachment) Combined Flow Control / 2 Pump Circuit" {5051}
2002/02/11
The 6V-8633 Connector Has Changed {5057, 7553}
2005/11/28
Specifications
Travel Brake Valve
322B, 322B L and 322B LN Excavators Machine System Specifications
Disassembly and Assembly
Travel Brake Valves
322B & 322B L EXCAVATORS MACHINE SYSTEMS
Service Magazine
Quieter Solenoid Valve For Swing Parking Brake {5479,5483}
1997/12/01
Disassembly and Assembly
Cooler Bypass Check Valve
322B & 322B L EXCAVATORS MACHINE SYSTEMS
Special Instruction
Procedure for Reducing Hydraulic Noise in Boom Lowering Check Valve{5453, 5461}
Procedure for Reducing Hydraulic Noise in Boom Lowering Check Valve{5453, 5461}
Technical Information Bulletin
The Check Valve Group In The Hydraulic Return And Filter Lines Group Has A Valve Assembly That May Loosen
The Check Valve Group In The Hydraulic Return And Filter Lines Group Has A Valve Assembly That May Loosen
Disassembly and Assembly
Cooler Bypass Check Valve
322B & 322B L EXCAVATORS MACHINE SYSTEMS
Service Magazine
Special Instruction, REHS0555 Is Available to Reduce Hydraulic Noise In Boom Lowering Check Valves {5453, 5461}
1999/12/13
A New Slow Return Check Valve Improves Hydraulic Performance {5067}
2000/09/04
An Improved Fitting Reduces Internal Wear in the Check Valve {5067}
2001/02/12
Special Instruction
Procedure for Reducing Hydraulic Noise in Boom Lowering Check Valve{5453, 5461}
Procedure for Reducing Hydraulic Noise in Boom Lowering Check Valve{5453, 5461}
Service Magazine
Correction to Service Manual , "Hydraulic System (Attachment) Combined Flow Control / 2 Pump Circuit" {5051}
2002/02/11
Operation and Maintenance Manual
SmartBoom Control - If Equipped
320B, 322B, 325B, 330B and 345B Excavators
SmartBoom Operation - If Equipped
320B, 322B, 325B, 330B and 345B Excavators
Service Letter-NACD
Product Support Program For Replacing The Ball Valve Of The Auxiliary Combined Circuit Which May Fail On Certain 320, 320L, 320N, 320S, 322, 322B, 322B LN, 325, 325L, 325B L, 325B LN 325N, 330, 330B, 330B LN, 330L And 330N Excavators
Product Support Program For Replacing The Ball Valve Of The Auxiliary Combined Circuit Which May Fail On Certain 320, 320L, 320N, 320S, 322, 322B, 322B LN, 325, 325L, 325B L, 325B LN 325N, 330, 330B, 330B LN, 330L And 330N Excavators
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Technical Information Bulletin
Auxiliary Control Pedal (4th) Is Still Active Even Though Backup Switch Is Activated In Manual Backup Mode
Auxiliary Control Pedal (4th) Is Still Active Even Though Backup Switch Is Activated In Manual Backup Mode
Specifications
Travel Brake Valve
322B, 322B L and 322B LN Excavators Machine System Specifications
Pilot Valve (Travel)
322B, 322B L and 322B LN Excavators Machine System Specifications
Pilot Control Valve (Implement and Swing)
322B, 322B L and 322B LN Excavators Machine System Specifications
Main Control Valve
322B, 322B L and 322B LN Excavators Machine System Specifications
Tool Operating Manual
Using the 173-1530 Injector Seating Tool Group on 3114, 3116, and 3126 MUI or 3116 and 3126 HEUI 2-Valve Engines{1290}
Using the 173-1530 Injector Seating Tool Group on 3114, 3116, and 3126 MUI or 3116 and 3126 HEUI 2-Valve Engines{1290}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
Service Letter-China
Product Support Program For Replacing The Ball Valve Of The Auxiliary Combined Circuit Which May Fail On Certain 320, 320L, 320N, 320S, 322, 322B, 322B LN, 325, 325L, 325B L, 325B LN 325N, 330, 330B, 330B LN, 330L And 330N Excavators
Product Support Program For Replacing The Ball Valve Of The Auxiliary Combined Circuit Which May Fail On Certain 320, 320L, 320N, 320S, 322, 322B, 322B LN, 325, 325L, 325B L, 325B LN 325N, 330, 330B, 330B LN, 330L And 330N Excavators
Service Letter-Asia
Service Letter-APD
Disassembly and Assembly
Pilot Control Valves (Travel)
322B & 322B L EXCAVATORS MACHINE SYSTEMS
Auxiliary Pilot Control Valve (Straight Travel)
322B & 322B L EXCAVATORS MACHINE SYSTEMS
Pilot Control Valves (Implement)
322B & 322B L EXCAVATORS MACHINE SYSTEMS
Hydraulic Activation Control Valve
322B & 322B L EXCAVATORS MACHINE SYSTEMS
Boom Drift Reduction Valve
322B & 322B L EXCAVATORS MACHINE SYSTEMS
Stick Drift Reduction Valve
322B & 322B L EXCAVATORS MACHINE SYSTEMS
Main Control Valve
322B & 322B L EXCAVATORS MACHINE SYSTEMS
Service Magazine
New Optional Spring Available To Lighten The Required Operating Force On Control Levers Improves Operator Comfort {5465,5466}
1997/05/12
Optional Valve Spool Kits Are Available For The Pilot Valve Group To Modify The Response Of Implement Controls{5059,5462,5465,5466}
1998/04/20
Special Instructions Are now Available For Installing Two-Way And Four-Way Pilot Valves{5051,5059}
1998/05/04
Optional Valve Spool Kits Are Available For The Pilot Valve Group To Modify The Response Of Implement Controls{5059,5462,5465,5466}
1998/12/28
Stem Kits For Main Hydraulic Control Valves Are Now Serviced {5051}
1999/02/08
New Shuttle Valves Installed In Boom Hydraulic Circuit At Main Control Valve On Excavators With An Auxiliary Circuit {5057,5059}
1999/04/12
New Hose Routing In Hydraulic Auxiliary Pilot Lines Allows Operator To Relieve Pressure {5051,5057}
1999/10/25
A New Slow Return Check Valve Improves Hydraulic Performance {5067}
2000/09/04
Correction to Service Manual , "Hydraulic System (Attachment) Combined Flow Control / 2 Pump Circuit" {5051}
2002/02/11
The 6V-8633 Connector Has Changed {5057, 7553}
2005/11/28
A New Solenoid Valve Group for the Fine Swing Control Is Available {5479, 5480}
2008/07/28
Spanner Wrench is Available for Ecology Drain Valves {1302, 1353, 1372, 5076, 5613}
2006/03/20
Specifications
Check Valve (Stick Drift Reduction)
322B, 322B L and 322B LN Excavators Machine System Specifications
Disassembly and Assembly
Boom Drift Reduction Valve
322B & 322B L EXCAVATORS MACHINE SYSTEMS
Stick Drift Reduction Valve
322B & 322B L EXCAVATORS MACHINE SYSTEMS
Operation and Maintenance Manual
Joystick Controls Alternate Patterns - If Equipped
320B, 322B and 325B Excavators
Work Tool Flow Control - If Equipped
320B, 322B and 325B Excavators
Specifications
Flow Control Valve - Stick Shock Reducing Valve
322B, 322B L and 322B LN Excavators Machine System Specifications
Truck Engine News
Single Purpose Fluid Sampling Valves and Dual Purpose Fluid Sampling Valves Require Different Quick Connect Couplers {0645, 7542}
2004/12/01
Engine News
Contamination Control Guidelines
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Service Magazine
Color Coded Dust Caps for S&middot;O&middot;S Ports Will Be Available {7770}
2003/12/01
243-3133 Quick Connect Coupler (Fluid Sampling) Provides A Coupler for Portable Particle Analyzers {0707, 0717, 0731, 0732, 0738}
2004/07/01
Single Purpose Fluid Sampling Valves and Dual Purpose Fluid Sampling Valves Require Different Quick Connect Couplers {0645, 7542}
2004/12/01
Disassembly and Assembly
Pilot Control Valves (Implement)
322B & 322B L EXCAVATORS MACHINE SYSTEMS
Service Magazine
Optional Valve Spool Kits Are Available For The Pilot Valve Group To Modify The Response Of Implement Controls{5059,5462,5465,5466}
1998/04/20
Optional Valve Spool Kits Are Available For The Pilot Valve Group To Modify The Response Of Implement Controls{5059,5462,5465,5466}
1998/12/28
Special Instruction
Procedure for Reducing Hydraulic Noise in Boom Lowering Check Valve{5453, 5461}
Procedure for Reducing Hydraulic Noise in Boom Lowering Check Valve{5453, 5461}
Systems Operation
Control Valve (Stick Lowering)
320B, 322B, 325B and 330B Excavators Attachment Hydraulic System
Control Valve (Boom Lowering)
320B, 322B, 325B and 330B Excavators Attachment Hydraulic System
Testing and Adjusting
Boom Lowering Control Valve - Test and Adjust
320B, 322B, 325B and 330B Excavators Attachment Hydraulic System
Stick Lowering Control Valve - Test and Adjust
320B, 322B, 325B and 330B Excavators Attachment Hydraulic System
Service Magazine
Special Instruction, REHS0555 Is Available to Reduce Hydraulic Noise In Boom Lowering Check Valves {5453, 5461}
1999/12/13
Specifications
Control Manifold (Pilot Oil)
322B, 322B L and 322B LN Excavators Machine System Specifications
Service Magazine
An Improved Ball Valve Gp Is Now Used {1329}
2004/07/05
A New Valve Assembly for the Auxiliary Hydraulic Lines Group Is Available {1329}
2006/05/15
A New Manual Valve Group for the Auxiliary Hydraulic Lines is Available for Certain Excavators {1329, 5001, 5130}
2009/06/15
The Work Tool Ball Valve Can Seize on Certain Wheeled and Medium Hydraulic Excavators {1329, 5001, 5130}
2010/11/01
Special Instruction
Installation of the Four-Way Pilot Valve Group (Control Pattern Change) {5051, 5059}
Installation of the Four-Way Pilot Valve Group (Control Pattern Change) {5051, 5059}
Technical Information Bulletin
Auxiliary Control Pedal (4th) Is Still Active Even Though Backup Switch Is Activated In Manual Backup Mode
Auxiliary Control Pedal (4th) Is Still Active Even Though Backup Switch Is Activated In Manual Backup Mode
Specifications
Check Valve (Boom Drift Reduction)
322B, 322B L and 322B LN Excavators Machine System Specifications
Check Valve (Stick Drift Reduction)
322B, 322B L and 322B LN Excavators Machine System Specifications
Disassembly and Assembly
Pilot Control Valves (Travel)
322B & 322B L EXCAVATORS MACHINE SYSTEMS
Auxiliary Pilot Control Valve (Straight Travel)
322B & 322B L EXCAVATORS MACHINE SYSTEMS
Pilot Control Valves (Implement)
322B & 322B L EXCAVATORS MACHINE SYSTEMS
Pilot Relief Valve
322B & 322B L EXCAVATORS MACHINE SYSTEMS
Boom Drift Reduction Valve
322B & 322B L EXCAVATORS MACHINE SYSTEMS
Stick Drift Reduction Valve
322B & 322B L EXCAVATORS MACHINE SYSTEMS
Service Magazine
New Optional Spring Available To Lighten The Required Operating Force On Control Levers Improves Operator Comfort {5465,5466}
1997/05/12
Optional Valve Spool Kits Are Available For The Pilot Valve Group To Modify The Response Of Implement Controls{5059,5462,5465,5466}
1998/04/20
Special Instructions Are now Available For Installing Two-Way And Four-Way Pilot Valves{5051,5059}
1998/05/04
Optional Valve Spool Kits Are Available For The Pilot Valve Group To Modify The Response Of Implement Controls{5059,5462,5465,5466}
1998/12/28
New Shuttle Valves Installed In Boom Hydraulic Circuit At Main Control Valve On Excavators With An Auxiliary Circuit {5057,5059}
1999/04/12
The Hydraulic Pilot Oil Filter Is Improved {5059, 5092, 5479}
2003/07/14
Optional Spool Kits are Available for the Pilot Valve to Modify the Response of the Implement Controls {5059}
2000/08/14
A New Pressure Switch Improves the Reliability of the Automatic Engine Speed Control {5057, 5059}
2008/07/14
Testing and Adjusting
Relief Valve (Pilot) - Test and Adjust
322B Excavator Hydraulic System
Service Letter-NACD
The 4th Pedal Circuit Needs To Be Modified On Certain 320B, 322B, 325B, 330B And 345B Excavators
The 4th Pedal Circuit Needs To Be Modified On Certain 320B, 322B, 325B, 330B And 345B Excavators
Service Letter-CSARL
Disassembly and Assembly
Solenoid Valves
322B & 322B L EXCAVATORS MACHINE SYSTEMS
Engine &amp; Main Hydraulic Pump
SUPPLEMENT FOR 322B & 322B L EXCAVATORS - 3116 ENGINE
Proportional Reducing Valve
322B & 322B L EXCAVATORS MACHINE SYSTEMS
Tool Operating Manual
Repairing Line Relief Valve Seats in Hydraulic Control Valves Using the 229-3612 Hydraulic Valve Seat Repair Kit{0738, 5117}
Repairing Line Relief Valve Seats in Hydraulic Control Valves Using the 229-3612 Hydraulic Valve Seat Repair Kit{0738, 5117}
Testing and Adjusting
Relief Valve (One Way Flow Line) - Test and Adjust
320B, 322B, 325B and 330B Excavators Attachment Hydraulic System
Relief Valve (Main) - Test and Adjust
322B Excavator Hydraulic System
Relief Valve (Line) - Test and Adjust
322B Excavator Hydraulic System
Relief Valve (Swing) - Test and Adjust
322B Excavator Hydraulic System
Relief Valve (Travel Motor) - Test and Adjust
322B Excavator Hydraulic System
Service Magazine
New Relief Valve For Main Hydraulic System Improves Maintaining Pressure Setting {5069}
1998/04/13
New Relief Valve For Main Hydraulic System Improves Maintaining Pressure Setting {5069}
1998/08/17
A New Main Relief Valve Improves the Regulation of the Pressure in the Hydraulic System {5069}
2000/04/03
Operation of Swing Relief Valve Has Been Improved {5454}
2000/03/27
The 229-3612 Valve Seat Tool Gp Is Available to Repair Line Relief Valve Seats {0738, 5117}
2012/01/19
Specifications
Selector Valve (Hydraulic Lockout)
322B, 322B L and 322B LN Excavators Machine System Specifications
Service Magazine
New Selector Valves for the Clamshell Circuit Are Now Used {5065, 5117}
2006/11/20
Technical Information Bulletin
Auxiliary Control Pedal (4th) Is Still Active Even Though Backup Switch Is Activated In Manual Backup Mode
Auxiliary Control Pedal (4th) Is Still Active Even Though Backup Switch Is Activated In Manual Backup Mode
Disassembly and Assembly
Main Control Valve
322B & 322B L EXCAVATORS MACHINE SYSTEMS
Service Magazine
Special Instructions Are now Available For Installing Two-Way And Four-Way Pilot Valves{5051,5059}
1998/05/04
New Hose Routing In Hydraulic Auxiliary Pilot Lines Allows Operator To Relieve Pressure {5051,5057}
1999/10/25
Technical Information Bulletin
Auxiliary Control Pedal (4th) Is Still Active Even Though Backup Switch Is Activated In Manual Backup Mode
Auxiliary Control Pedal (4th) Is Still Active Even Though Backup Switch Is Activated In Manual Backup Mode
Disassembly and Assembly
Pilot Control Valves (Implement)
322B & 322B L EXCAVATORS MACHINE SYSTEMS
Boom Drift Reduction Valve
322B & 322B L EXCAVATORS MACHINE SYSTEMS
Stick Drift Reduction Valve
322B & 322B L EXCAVATORS MACHINE SYSTEMS
Service Magazine
Optional Valve Spool Kits Are Available For The Pilot Valve Group To Modify The Response Of Implement Controls{5059,5462,5465,5466}
1998/04/20
Special Instructions Are now Available For Installing Two-Way And Four-Way Pilot Valves{5051,5059}
1998/05/04
Optional Valve Spool Kits Are Available For The Pilot Valve Group To Modify The Response Of Implement Controls{5059,5462,5465,5466}
1998/12/28
New Shuttle Valves Installed In Boom Hydraulic Circuit At Main Control Valve On Excavators With An Auxiliary Circuit {5057,5059}
1999/04/12
The Reliability of the Shuttle Valve Has Been Improved {4289, 5079}
2005/06/13
Service Letter-NACD
The 4th Pedal Circuit Needs To Be Modified On Certain 320B, 322B, 325B, 330B And 345B Excavators
The 4th Pedal Circuit Needs To Be Modified On Certain 320B, 322B, 325B, 330B And 345B Excavators
PRODUCT SUPPORT PROGRAM FOR REPLACING THE SOLENOID VALVE ON CERTAIN 312B, 315B, 317B, 318B, 320B, 322B, 325B, 330B AND 345B EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE SOLENOID VALVE ON CERTAIN 312B, 315B, 317B, 318B, 320B, 322B, 325B, 330B AND 345B EXCAVATORS
Service Letter-CSARL
The 4th Pedal Circuit Needs To Be Modified On Certain 320B, 322B, 325B, 330B And 345B Excavators
The 4th Pedal Circuit Needs To Be Modified On Certain 320B, 322B, 325B, 330B And 345B Excavators
PRODUCT SUPPORT PROGRAM FOR REPLACING THE SOLENOID VALVE ON CERTAIN 312B, 315B, 317B, 318B, 320B, 322B, 325B, 330B AND 345B EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE SOLENOID VALVE ON CERTAIN 312B, 315B, 317B, 318B, 320B, 322B, 325B, 330B AND 345B EXCAVATORS
Service Letter-Americas
Specifications
Solenoid Valve - Anti-Reaction Valve with Fine Swing Solenoid Valve
322B, 322B L and 322B LN Excavators Machine System Specifications
Testing and Adjusting
Check Overcurrent at Proportional Reducing Valve - Troubleshoot - 4102
308B, 311B, 312B, 315B, 317B, 318B, 320B, 322B, 325B, 330B, M325B and W330B Excavators Engine and Pump Control
Check Open Circuit at Proportional Reducing Valve - Troubleshoot - 4103
308B, 311B, 312B, 315B, 317B, 318B, 320B, 322B, 325B, 330B, M325B and W330B Excavators Engine and Pump Control
Check Short Circuit of Proportional Reducing Valve to Battery Voltage - Troubleshoot
308B, 311B, 312B, 315B, 317B, 318B, 320B, 322B, 325B, 330B, M325B and W330B Excavators Engine and Pump Control
Proportional Reducing Valve Sweep - Test
308B, 311B, 312B, 315B, 317B, 318B, 320B, 322B, 325B, 330B, M325B and W330B Excavators Engine and Pump Control
Proportional Reducing Valve - Calibrate
308B, 311B, 312B, 315B, 317B, 318B, 320B, 322B, 325B, 330B, M325B and W330B Excavators Engine and Pump Control
Disassembly and Assembly
Solenoid Valves
322B & 322B L EXCAVATORS MACHINE SYSTEMS
Service Magazine
Quieter Solenoid Valve For Swing Parking Brake {5479,5483}
1997/12/01
A New Solenoid Valve Group for the Fine Swing Control Is Available {5479, 5480}
2008/07/28
Technical Information Bulletin
Auxiliary Control Pedal (4th) Is Still Active Even Though Backup Switch Is Activated In Manual Backup Mode
Auxiliary Control Pedal (4th) Is Still Active Even Though Backup Switch Is Activated In Manual Backup Mode
Disassembly and Assembly
Main Control Valve
322B & 322B L EXCAVATORS MACHINE SYSTEMS
Service Magazine
Special Instructions Are now Available For Installing Two-Way And Four-Way Pilot Valves{5051,5059}
1998/05/04
New Hose Routing In Hydraulic Auxiliary Pilot Lines Allows Operator To Relieve Pressure {5051,5057}
1999/10/25

Truck sale:

2001 CAT 322BLN
USD $43,396 
2001 CAT 322BLN

EXIM MAQUINARIA S.L.
2001 CAT 322BLN
Call 
2001 CAT 322BLN

MAQUINARIA ALBOREA
1998 CAT 322BLN
Call 
1998 CAT 322BLN

GUAINVILLE INTERNATIONAL
LIMAY, France
2001 CAT 322BLN
Call 
2001 CAT 322BLN

GERL Baumaschinen Handel - AUSTRIA
Haid, Austria, Austria
2001 CAT 322BLN
USD $36,895 
2001 CAT 322BLN

Equippo AG
Zug, Zug, Switzerland
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.