AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

330B EXCAVATORS EQUIPPED WITH CUSTOM ATTACHMENTS 3YR00001-UP (MACHINE) ELECTRICAL AND STARTING SYSTEM Caterpillar SIS



EXCAVATOR 330B L EXCAVATOR 3YR
 330B EXCAVATORS EQUIPPED WITH CUSTOM ATTACHMENTS 3YR00001-UP (MACHINE) SEBF0914 330B L 3YR   (1996)

Parts group 330B L:

  For full view, you need register
ELECTRICAL AND STARTING SYSTEM
GENERATOR GP
141-5998 MAGNET
1415998 (V00) MAGNET
SUPPLIER : MAGNETA
TYPE : RMF140
PIN 4RS1-UP; 5LS1-UP
LIGHTING GP
LIGHTING GP
188-3781 LIGHTING GP
1883781 (V00) LIGHTING GP-BOOM
8200MM BOOM MH
EARLIER
PIN 4RS1-UP; 5LS1-UP
PART OF 1890639 BOOM AR-MH
LIGHTING GP
188-3781 LIGHTING GP
1883781 (V01) LIGHTING GP-BOOM
8200MM BOOM MH
LATER
PIN 4RS1-UP; 5LS1-UP
PART OF 1890639 BOOM AR-MH
WIRING GP
WIRING GP
148-2245 WIRING GP
1482245 (V01) WIRING GP-RISER
RISER 700MM
EARLIER
PIN 4RS1-UP; 5LS1-UP
PART OF 1481327 RISER AR-CAB
WIRING GP
148-2245 WIRING GP
1482245 (V03) WIRING GP-RISER
RISER 700MM
LATER
PIN 4RS1-UP; 5LS1-UP
PART OF 1481327 RISER AR-CAB
HEATER GP
141-3865 HEATER GP
1413865 (V00) HEATER GP
ELECTRIC FUEL FILTER
PIN 3YR1-UP; 5LR1-UP; 4RS1-UP; 5LS1-UP

Information:

(For parts list, see above)

Special Instruction
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Operation and Maintenance Manual
Travel Alarm - If Equipped
330B L and 330B LN Excavators
Monitoring System
330B L and 330B LN Excavators
Travel Alarm - Test
330B L and 330B LN Excavators
Special Instruction
Installation of 244-1090 Alarm Gp {7400, 7402, 7407}
Installation of 244-1090 Alarm Gp {7400, 7402, 7407}
Installation of 262-6141 Alarm Gp {7406}
Installation of 262-6141 Alarm Gp {7406}
Testing and Adjusting
Travel Alarm Is Abnormal - Troubleshoot - 4108
308B, 311B, 312B, 315B, 317B, 318B, 320B, 322B, 325B, 330B, M325B and W330B Excavators Engine and Pump Control
Engine News
Repair Parts Available for Alternator R-Terminal {1405}
2000/12/01
Harness Repair of Alternator R-Terminal Connector {1405}
2000/12/01
Charging System Troubleshooting Guide Has Been Updated for All Engines {1406, 7569}
Charging System Troubleshooting Guide Has Been Updated for All Engines {1406, 7569}
Special Instruction
Upgrading Alternators To Include An Integrated Circuit Regulator{1405, 1410}
Upgrading Alternators To Include An Integrated Circuit Regulator{1405, 1410}
Charging System Troubleshooting {1406}
Charging System Troubleshooting {1406}
Procedure for Replacing Regulator Kit on All Engines {1405}
Procedure for Replacing Regulator Kit on All Engines {1405}
Procedure to Install Brush Holder Assembly to End Frame on All Engines {1405}
Procedure to Install Brush Holder Assembly to End Frame on All Engines {1405}
Technical Information Bulletin
Reman Alternator Failures {1405}
Reman Alternator Failures {1405}
Specifications
Alternator and Regulator
3306C Engines for Caterpillar Built Machines
Alternator and Regulator
3306C Engines for Caterpillar Built Machines
Alternator and Regulator
3306C Engines for Caterpillar Built Machines
Alternator
26SI Series Alternator
Alternator
30SI Series and 34SI Series Alternator
Alternator
Alternator - Delco 21SI
Alternator
HDB Series and M1 Series Heavy Duty Brushless Alternators
Alternator and Regulator
3306C Engines for Caterpillar Built Machines
Alternator
N3 Series Brushless Alternators
Alternator and Regulator
3306C Engines for Caterpillar Built Machines
Alternator
Alternator - Delco 27SI
Alternator and Regulator
3306C Engines for Caterpillar Built Machines
Alternator and Regulator
3306C Engines for Caterpillar Built Machines
Systems Operation
General Information
26SI Series Alternator
Component Description
26SI Series Alternator
Normal Operation
26SI Series Alternator
General Information
30SI Series and 34SI Series Alternator
Normal Operation
30SI Series and 34SI Series Alternator
Component Description
30SI Series and 34SI Series Alternator
General Information
Alternator - Delco 21SI
Component Description
Alternator - Delco 21SI
Normal Operation
Alternator - Delco 21SI
General Information
HDB Series and M1 Series Heavy Duty Brushless Alternators
Normal Operation
HDB Series and M1 Series Heavy Duty Brushless Alternators
Component Description
HDB Series and M1 Series Heavy Duty Brushless Alternators
General Information
N3 Series Brushless Alternators
Component Description
N3 Series Brushless Alternators
Normal Operation
N3 Series Brushless Alternators
General Information
Alternator - Delco 27SI
Normal Operation
Alternator - Delco 27SI
Component Description
Alternator - Delco 27SI
Information Release Memo
REMANUFACTURED HEAVY DUTY BRUSHLESS ALTERNATORS
REMANUFACTURED HEAVY DUTY BRUSHLESS ALTERNATORS
Testing and Adjusting
T1 Alternator Output - Test
26SI Series Alternator
T2 Electrical System Current - Test
26SI Series Alternator
T3 Charging System - Test
26SI Series Alternator
T4 Alternator Drive System - Check
26SI Series Alternator
T5 Alternator Current - Test
26SI Series Alternator
T6 Residual Magnetism Restoration
26SI Series Alternator
T7 Identifying Source of Current Draw - Test
26SI Series Alternator
T8 Alternator Overcharging - Test
26SI Series Alternator
Initial Troubleshooting Procedure
26SI Series Alternator
General Information
26SI Series Alternator
Component - Test
26SI Series Alternator
T1 Alternator Output - Test
30SI Series and 34SI Series Alternator
T2 Electrical System Current - Test
30SI Series and 34SI Series Alternator
T3 Charging System - Test
30SI Series and 34SI Series Alternator
T4 Alternator Drive System - Check
30SI Series and 34SI Series Alternator
T5 Alternator Current - Test
30SI Series and 34SI Series Alternator
T6 Residual Magnetism Restoration
30SI Series and 34SI Series Alternator
T7 Identifying Source of Current Draw - Test
30SI Series and 34SI Series Alternator
T8 Alternator Overcharging - Test
30SI Series and 34SI Series Alternator
General Information
30SI Series and 34SI Series Alternator
Initial Troubleshooting Procedure
30SI Series and 34SI Series Alternator
Component - Test
30SI Series and 34SI Series Alternator
Battery Voltage Is Abnormal - Troubleshoot - 1305, 4101, 420C And 420D
308B, 311B, 312B, 315B, 317B, 318B, 320B, 322B, 325B, 330B, M325B and W330B Excavators Engine and Pump Control
Charging System - Test
3306C Engines for Caterpillar Built Machines
Capacitor - Test
Alternator - Delco 21SI
Diode Assembly - Test
Alternator - Delco 21SI
Brush Length - Check
Alternator - Delco 27SI
Field Winding - Test
Alternator - Delco 21SI
Insulated Screw - Check
Alternator - Delco 21SI
Rectifier - Test
Alternator - Delco 21SI
Regulator - Test
Alternator - Delco 21SI
Stator - Test
Alternator - Delco 21SI
Residual Magnetism - Restore
Alternator - Delco 21SI
Field Winding - Test
HDB Series and M1 Series Heavy Duty Brushless Alternators
Capacitor - Test
HDB Series and M1 Series Heavy Duty Brushless Alternators
Stator - Test
HDB Series and M1 Series Heavy Duty Brushless Alternators
Rectifier - Test
HDB Series and M1 Series Heavy Duty Brushless Alternators
Residual Magnetism - Restore
N3 Series Brushless Alternators
Regulator - Test
HDB Series and M1 Series Heavy Duty Brushless Alternators
Field Winding - Test
N3 Series Brushless Alternators
Capacitor - Test
N3 Series Brushless Alternators
Rectifier - Test
N3 Series Brushless Alternators
Stator - Test
N3 Series Brushless Alternators
Regulator - Test
N3 Series Brushless Alternators
Regulator - Test
Alternator - Delco 27SI
Field Winding - Test
Alternator - Delco 27SI
Stator - Test
Alternator - Delco 27SI
Diode Assembly - Test
Alternator - Delco 27SI
Rectifier - Test
Alternator - Delco 27SI
Insulated Screw - Check
Alternator - Delco 27SI
Residual Magnetism - Restore
Alternator - Delco 27SI
Capacitor - Test
Alternator - Delco 27SI
Charging System - Test
3306C Engines for Caterpillar Built Machines
Troubleshooting
General Information
N3 Series Brushless Alternators
Charging System
Alternator - Delco 27SI
Charging System
HDB Series and M1 Series Heavy Duty Brushless Alternators
General Information
Alternator - Delco 27SI
Alternator
Alternator - Delco 27SI
MID 161 - CID 0168 - FMI 00
Product Link - PL522/523
MID 161 - CID 0168 - FMI 01
Product Link - PL522/523
MID 161 - CID 1251 - FMI 03
Product Link - PL522/523
MID 122 - CID 0168 - FMI 00
Product Link 121S/300
MID 122 - CID 0168 - FMI 01
Product Link 121S/300
MID 122 - CID 1251 - FMI 03
Product Link 121S/300
Disassembly and Assembly
Charging Alternator Group
SUPPLEMENT FOR 330B, 330B L, & 330B LN EXCAVATORS - 3306 ENG
Alternator - Assemble
26SI Series Alternator
Alternator - Disassemble
26SI Series Alternator
Alternator - Disassemble
30SI Series and 34SI Series Alternator
Alternator - Assemble
30SI Series and 34SI Series Alternator
Alternator - Disassemble
Alternator - Delco 21SI
Alternator - Assemble
Alternator - Delco 21SI
Alternator - Disassemble - M1 Series Alternator (35 Amp)
HDB Series and M1 Series Heavy Duty Brushless Alternators
Alternator - Assemble - M1 Series Alternator (35 Amp)
HDB Series and M1 Series Heavy Duty Brushless Alternators
Alternator - Assemble - HDB Series Alternator
HDB Series and M1 Series Heavy Duty Brushless Alternators
Alternator - Disassemble - HDB Series Alternator
HDB Series and M1 Series Heavy Duty Brushless Alternators
Alternator - Assemble
N3 Series Brushless Alternators
Alternator - Disassemble
N3 Series Brushless Alternators
Alternator - Disassemble
Alternator - Delco 27SI
Alternator - Assemble
Alternator - Delco 27SI
Service Magazine
New Regulator And Field Coil Assemblies Used{1410,1405}
1981/11/23
Voltage Regulator Cross Reference Chart{1410,1405}
1985/07/01
Identification Of External Terminals On Alternators{1405,1406,1400}
1987/03/23
Alternator "R" Terminal Wire Assembly Available For Wiring Harness Repair{1408}
1987/05/04
Alternator/Generator Output Test On The Engine{1401,1404,1405,1406}
1987/05/04
Check Alternator Output Connection Prior To Machine Delivery{1405}
1987/05/18
Remanufactured Heavy-Duty Starters And High-Amp Alternators{1405,1453}
1987/05/25
Correct Torque Value For Alternator Drive Pulley Retaining Nut Is Important{1405}
1987/11/23
8T5314 Socket Adapter Available To Correctly Install Alternator Pulley Nut {0601}
1988/01/25
New 35-Ampere Alternator Used On Some Engines In Caterpillar Equipment{1405,1406}
1979/08/13
Voltage Regulator Can Cause Variable Ammeter Indications{1410,1401,1405,1406,7467}
1979/10/22
Improved Alternator Groups Now Available{1405}
1998/05/04
Identification Of External Terminals On Alternators {1405,1406,1400}
1998/12/07
Repair Parts Available for Alternator R-Terminal {1405}
2000/10/02
Harness Repair of Alternator R-Terminal Connector {1405, 1408, 7553}
2000/10/02
Field Replacement of Remanufactured Starting Motors and Remanufactured Alternators {1405, 1453}
2001/11/19
Charging System Troubleshooting Guide Has Been Updated for All Machines {1406, 7569}
Charging System Troubleshooting Guide Has Been Updated for All Machines {1406, 7569}
Truck Engine News
Coolant/Battery Tester Group Quickly Tests Coolant and Battery Acid {0773, 0785}
2004/12/27
Engine News
Operation and Maintenance Manual
Battery - Recycle
330B L and 330B LN Excavators
Battery, Battery Cable or Battery Disconnect Switch - Replace
330B L and 330B LN Excavators
Battery Electrolyte Level for Low Maintenance Battery - Check
330B L and 330B LN Excavators
Fuses - Replace
330B L and 330B LN Excavators
Special Instruction
Use of the 4C6534 Speed Switch Calibration Harness{0781, 0785}
Use of the 4C6534 Speed Switch Calibration Harness{0781, 0785}
Retrofit Installation of Coolant Loss Sensor{1353, 1395, 7422, 7470}
Retrofit Installation of Coolant Loss Sensor{1353, 1395, 7422, 7470}
Use Of 6V3025 Battery Cable Repair Kit{0613, 1400}
Use Of 6V3025 Battery Cable Repair Kit{0613, 1400}
Battery Ratings And Cross Reference Chart{1401}
Battery Ratings And Cross Reference Chart{1401}
Technical Information Bulletin
Recommendations for Battery Charging and Temperatures for Machines and Generator Sets{1401, 751B}
Recommendations for Battery Charging and Temperatures for Machines and Generator Sets{1401, 751B}
Process for Communicating an Incident with a Battery{1401}
Process for Communicating an Incident with a Battery{1401}
Tool Operating Manual
M0077220 (NEHS1231) 115V & 230V Battery Chargers {1401, 751B}
M0077220 (NEHS1231) 115V & 230V Battery Chargers {1401, 751B}
M0090131 Battery Analyzer 480-4181 (484-4859 Group) {0374, 0599, 0709, 1401, 7468}
M0090131 Battery Analyzer 480-4181 (484-4859 Group) {0374, 0599, 0709, 1401, 7468}
Testing and Adjusting
Battery Voltage Is Abnormal - Troubleshoot - 1305, 4101, 420C And 420D
308B, 311B, 312B, 315B, 317B, 318B, 320B, 322B, 325B, 330B, M325B and W330B Excavators Engine and Pump Control
Battery - Test
3306C Engines for Caterpillar Built Machines
Troubleshooting
MID 161 - CID 0168 - FMI 00
Product Link - PL522/523
MID 161 - CID 0168 - FMI 01
Product Link - PL522/523
MID 161 - CID 1251 - FMI 03
Product Link - PL522/523
MID 122 - CID 0168 - FMI 00
Product Link 121S/300
MID 122 - CID 0168 - FMI 01
Product Link 121S/300
MID 122 - CID 1251 - FMI 03
Product Link 121S/300
Service Magazine
Maintenance Free Batteries{1401}
1986/03/10
Requirements For Shipping Wet Batteries In The U.S.{1401,7500}
1986/04/07
Heavy-Duty Line Of Batteries Available To U.S. Dealers{1400,1401}
1986/09/01
Safety Vent Caps For Caterpillar Batteries{1401}
1977/07/11
5P957 And 5P3514 Coolant And Battery Tester{0786,1395,1401}
1987/03/23
Identification Of External Terminals On Alternators{1405,1406,1400}
1987/03/23
Alternator "R" Terminal Wire Assembly Available For Wiring Harness Repair{1408}
1987/05/04
Alternator/Generator Output Test On The Engine{1401,1404,1405,1406}
1987/05/04
Testing The Starter On The Engine{1401,1450}
1987/05/04
Be Sure Battery Cable-To-Starter Connection Has Correct Torque{1453}
1988/03/14
Maintenance-Free Batteries Require Different Troubleshooting Procedures{1401}
1988/06/20
Revised Instructions For Installation of New Maintenance Free Batteries{1401,1400}
1988/12/12
Fuse And Wire Assembly Is Available For Protection Of Earlier 6N5906 Service Meters{7480}
1979/01/29
Shorter Mounting Bolts Used For Glow Plug Wiring{1403,1412}
1979/05/21
New 35-Ampere Alternator Used On Some Engines In Caterpillar Equipment{1405,1406}
1979/08/13
Voltage Regulator Can Cause Variable Ammeter Indications{1410,1401,1405,1406,7467}
1979/10/22
Two Plug Assemblies (Booster Cables) Are Available To Start Machines{1401,1453}
1979/11/05
Batteries Can Be Damaged If Too Much Vacuum Is Used During Electrolyte Fill{1401}
1979/11/26
High Performance Maintenance Free Battery Available{1401}
1989/01/16
Limitations On Engine Cranking Time{1453,1401}
1989/03/27
Preventive Maintenance For Batteries{1401}
1989/03/27
Causes And Effects Of Low Battery Voltage On Electric Starters{1401,1453,1467}
1989/04/24
Procedure For Replacing Batteries Or Battery Cables {1401,1402,1411}
1989/05/01
Procedure For Replacing Batteries, Battery Cables Or Disconnect Switches {1401,1402,1411}
1989/05/01
Procedure For Replacing Batteries, Battery Cables Or Disconnect Switches {1401,1402,1411}
1989/05/01
Special Instruction, "Battery Charging Rate And Time Tables," Available On Oil Resistant Paper{0374,1401}
1989/06/19
Fitting Needed To Install New Oil Pressure Switch When Replacing Former Switches{7485}
1991/11/25
Wiring Harness Conduit Component Sizes {1408}
1995/02/13
Ground Cables In The Battery And Wiring Circuit Now Have Full Contact To Ground {7050,1408,7253}
1998/08/24
Identification Of External Terminals On Alternators {1405,1406,1400}
1998/12/07
Coolant/Battery Tester Group Quickly Tests Coolant and Battery Acid {0773, 0785}
2004/12/27
New Software and a New Rotary Switch Improve the Reliability of the Engine Speed Dial on Excavators {1408, 7332, 7610, 7620}
2009/04/13
Operation and Maintenance Manual
Service Hour Meter
330B L and 330B LN Excavators
Service Magazine
Wiring Harness Conduit Component Sizes {1408}
1995/02/13
New Switch Assembly in Breaker Panel Groups Improves Reliability of Main Power Relay {1417,1423}
1999/06/28
Operation and Maintenance Manual
Work Tool Electronic Controller
330B L and 330B LN Excavators
Welding on Machines and Engines with Electronic Controls
330B L and 330B LN Excavators
Special Instruction
Troubleshooting Guide for 122-9897 Implement Electronic Control Module {5702}
Troubleshooting Guide for 122-9897 Implement Electronic Control Module {5702}
Installation of Seat Belt Reminder Systems {1408, 1901, 1902, 7327, 7602, 7606, 7610, 7620}
Installation of Seat Belt Reminder Systems {1408, 1901, 1902, 7327, 7602, 7606, 7610, 7620}
Tool Operating Manual
Communication Adapter II{0600, 0709, 7600, 7610}
Communication Adapter II{0600, 0709, 7600, 7610}
Using the 4C-8195 Control Service Tool{0374, 0599, 0709, 7490}
Using the 4C-8195 Control Service Tool{0374, 0599, 0709, 7490}
Systems Operation
Auxiliary Control (Pump Flow)
320B, 322B, 325B and 330B Excavators Attachment Hydraulic System
Testing and Adjusting
Auxiliary Control (Pump Flow) - Test and Reprogram
320B, 322B, 325B and 330B Excavators Attachment Hydraulic System
Disassembly and Assembly
Welding on Machines and Engines with Electronic Controls
330 B EXCAVATOR WITH FIELD INSTALLED COMBINED/ROTATE FUNCTIO
Service Magazine
New Oil Pressure Switch Used With EMS Systems{7485}
1986/03/10
Ether Starting Aid System Improves Cold Weather Starts{1456}
1979/03/19
Using The Electronic Monitor Panel To Determine The Amount Of Fuel In The Fuel Tank{5258,7451,7481,7490}
1997/10/13
The Correct Procedure For Starting The Engine Provides Accurate Prestart Fluid Level Monitoring On Electronic Monitor {7490,1416}
1998/11/23
Auxiliary Controller Improved To Access Auxiliary Circuit {5702,1901,7490}
1999/01/25
Using The Electronic Monitor Panel To Determine The Amount Of Fuel In The Fuel Tank{5258,7451,7481,7490}
1999/04/05
Special Instruction, REHS1046 , "Troubleshooting Guide for 122-9897 Implement Electronic Control Module " Is Available {5702}
2001/07/02
New Radio Software Is Now Available For Product Link 522 and 523 Radio On All Cat <SUP>&reg;</SUP> Products {7610, 7620}
2014/02/06
Military Electronic Technician (Military ET) Is Now Available For Military Personnel {0374, 0376, 0599, 1000, 7000, 7610, 7620}
Military Electronic Technician (Military ET) Is Now Available For Military Personnel {0374, 0376, 0599, 1000, 7000, 7610, 7620}
A New Handheld Digital Manometer is Now Available {7490}
A New Handheld Digital Manometer is Now Available {7490}
Truck Engine News
Do Not Use the 261-3363 Wireless Communication Adapter with Model Year 2007 Cat Engines and Transmissions in On-Highway Trucks {0785, 1930, 7620}
2007/10/01
New Software Flash File Extension Requires Caterpillar Electronic Technician (Cat ET) 2013B {0785, 1900, 1901}
2014/04/04
Engine News
New Service Information Tool for CAT Dealers is Now Available {1000}
2002/06/01
277-4734 Bypass Harness Assembly Allows Cat Electronic Technician (Cat ET) to Communicate with ADEM IV:E2 Electronic Control Modules {0779, 0785, 1901, 1930}
2006/09/04
The Programmable Monitoring System Parameters Have New Descriptions {1901, 1902, 7620}
2007/10/22
New Software Flash File Extension Requires Caterpillar Electronic Technician (Cat ET) 2013B {0785, 1900, 1901}
2014/03/28
A New Electronic Control Module Wash Out Process {1901, 1920}
A New Electronic Control Module Wash Out Process {1901, 1920}
New CAT Inspect Form Available for EMCP Troubleshooting and Inspection {0374, 4490, 7451, 7620}
New CAT Inspect Form Available for EMCP Troubleshooting and Inspection {0374, 4490, 7451, 7620}
Special Instruction
&quot;A Series&quot; Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}
Obtaining Factory Passwords and Software Enabled Attachments{7610, 7620}
Obtaining Factory Passwords and Software Enabled Attachments{7610, 7620}
Using the 217-0114 Adapter Cable As {0709, 1901, 1920}
Using the 217-0114 Adapter Cable As {0709, 1901, 1920}
Instructions for Communicating With and Flashing the <NOBR>10R-4085</NOBR> Engine Electronic Control Gp and the <NOBR>10R-1824</NOBR> Engine Electronic Control Gp {1901, 1920}
Instructions for Communicating With and Flashing the 10R-4085 Engine Electronic Control Gp and the 10R-1824 Engine Electronic Control Gp {1901, 1920}
Installation of Seat Belt Reminder Systems {1408, 1901, 1902, 7327, 7602, 7606, 7610, 7620}
Installation of Seat Belt Reminder Systems {1408, 1901, 1902, 7327, 7602, 7606, 7610, 7620}
Diagnostic Code Information for Caterpillar <SUP>&reg;</SUP> Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Diagnostic Code Information for Caterpillar ® Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Procedure to Flash the ADEM 3 Engine Electronic Control Gp {1901, 1920}
Procedure to Flash the ADEM 3 Engine Electronic Control Gp {1901, 1920}
Service Magazine
New Fuel Ratio Control Group Used On Engines Equipped With New Scroll Fuel System{1278}
1985/11/25
New Oil Control Piston Ring Used In 3300 Family Of Engines {1213,1214,1215}
1990/03/26
Electronic Control Modules and Computer Viruses {7610}
2000/12/04
New Service Information Tool for CAT Dealers is Now Available {1900}
2002/06/17
Auto Clearing of Diagnostics and Events from Electronic Control Module (ECM) {1901, 1920, 7610, 7620}
2012/08/10
Updated Flash Procedure for All Caterpillar Products {1920, 7610, 7620}
2014/09/16
New Software Flash File Extension Requires Caterpillar Electronic Technician (Cat ET) 2013B {0785, 7620}
2013/07/25
Cat<SUP>&reg;</SUP> Reman Now Offers Additional Control Modules for Certain Machine Engines {1901, 7610}
2014/10/14
New Machine Software for Cat<SUP>&reg;</SUP> Product Link Is Now Available on Certain Cat<SUP>&reg;</SUP> Products {7490, 7606, 7610, 7620}
New Machine Software for Cat® Product Link Is Now Available on Certain Cat® Products {7490, 7606, 7610, 7620}
Engine News
The Programmable Monitoring System Parameters Have New Descriptions {1901, 1902, 7620}
2007/10/22
Special Instruction
Obtaining Factory Passwords and Software Enabled Attachments{7610, 7620}
Obtaining Factory Passwords and Software Enabled Attachments{7610, 7620}
Diagnostic Code Information for Caterpillar <SUP>&reg;</SUP> Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Diagnostic Code Information for Caterpillar ® Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Service Magazine
Electronic Control Modules and Computer Viruses {7610}
2000/12/04
277-2362 Transmission Analyzer III Group Offers Upgraded Diagnostic Capabilities {0769, 0779, 0783}
2007/10/22
Auto Clearing of Diagnostics and Events from Electronic Control Module (ECM) {1901, 1920, 7610, 7620}
2012/08/10
Updated Flash Procedure for All Caterpillar Products {1920, 7610, 7620}
2014/09/16
New Software Flash File Extension Requires Caterpillar Electronic Technician (Cat ET) 2013B {0785, 7620}
2013/07/25
Cat<SUP>&reg;</SUP> Reman Now Offers Additional Control Modules for Certain Machine Engines {1901, 7610}
2014/10/14
Special Instruction
Obtaining Factory Passwords and Software Enabled Attachments{7610, 7620}
Obtaining Factory Passwords and Software Enabled Attachments{7610, 7620}
Diagnostic Code Information for Caterpillar <SUP>&reg;</SUP> Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Diagnostic Code Information for Caterpillar ® Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Testing and Adjusting
Controller - Replace
320B, 322B, 325B, 330B, 345B and 345B Series II Excavators Auxiliary Hydraulic System
Electrical Connector - Inspect
320B, 322B, 325B, 330B, 345B and 345B Series II Excavators Auxiliary Hydraulic System
Service Magazine
Electronic Control Modules and Computer Viruses {7610}
2000/12/04
Auto Clearing of Diagnostics and Events from Electronic Control Module (ECM) {1901, 1920, 7610, 7620}
2012/08/10
Updated Flash Procedure for All Caterpillar Products {1920, 7610, 7620}
2014/09/16
New Software Flash File Extension Requires Caterpillar Electronic Technician (Cat ET) 2013B {0785, 7620}
2013/07/25
Cat<SUP>&reg;</SUP> Reman Now Offers Additional Control Modules for Certain Machine Engines {1901, 7610}
2014/10/14
Engine News
The Programmable Monitoring System Parameters Have New Descriptions {1901, 1902, 7620}
2007/10/22
New CAT Inspect Form Available for EMCP Troubleshooting and Inspection {0374, 4490, 7451, 7620}
New CAT Inspect Form Available for EMCP Troubleshooting and Inspection {0374, 4490, 7451, 7620}
Special Instruction
Obtaining Factory Passwords and Software Enabled Attachments{7610, 7620}
Obtaining Factory Passwords and Software Enabled Attachments{7610, 7620}
Installation of the Machine Security System (MSS) Universal Attachment Kit {7631, 7631}
Installation of the Machine Security System (MSS) Universal Attachment Kit {7631, 7631}
Diagnostic Code Information for Caterpillar <SUP>&reg;</SUP> Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Diagnostic Code Information for Caterpillar ® Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Service Letter-NACD
PRODUCT SUPPORT PROGRAM FOR REPLACING THE AUXILIARY CIRCUIT ON CERTAIN 320B, 322B, 325B, 330B AND 345B EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE AUXILIARY CIRCUIT ON CERTAIN 320B, 322B, 325B, 330B AND 345B EXCAVATORS
Service Letter-CSARL
Service Letter-Americas
Technical Information Bulletin
300 B SERIES EXCAVATORS AUXILIARY CONTROLLER MALFUNCTIONS
300 B SERIES EXCAVATORS AUXILIARY CONTROLLER MALFUNCTIONS
Tool Operating Manual
Communication Adapter II{0600, 0709, 7600, 7610}
Communication Adapter II{0600, 0709, 7600, 7610}
Systems Operation
General Information (Electronic Control System)
308B, 311B, 312B, 315B, 317B, 318B, 320B, 322B, 325B, 330B, M325B and W330B Excavators Engine and Pump Control
Engine and Hydraulic Pump Controller
308B, 311B, 312B, 315B, 317B, 318B, 320B, 322B, 325B, 330B, M325B and W330B Excavators Engine and Pump Control
Related Components
308B, 311B, 312B, 315B, 317B, 318B, 320B, 322B, 325B, 330B, M325B and W330B Excavators Engine and Pump Control
Normal Operation
308B, 311B, 312B, 315B, 317B, 318B, 320B, 322B, 325B, 330B, M325B and W330B Excavators Engine and Pump Control
Power Mode Operation
308B, 311B, 312B, 315B, 317B, 318B, 320B, 322B, 325B, 330B, M325B and W330B Excavators Engine and Pump Control
Automatic Engine Control
308B, 311B, 312B, 315B, 317B, 318B, 320B, 322B, 325B, 330B, M325B and W330B Excavators Engine and Pump Control
One Touch Low Idle
308B, 311B, 312B, 315B, 317B, 318B, 320B, 322B, 325B, 330B, M325B and W330B Excavators Engine and Pump Control
Additional Functions
308B, 311B, 312B, 315B, 317B, 318B, 320B, 322B, 325B, 330B, M325B and W330B Excavators Engine and Pump Control
Work Mode
308B, 311B, 312B, 315B, 317B, 318B, 320B, 322B, 325B, 330B, M325B and W330B Excavators Engine and Pump Control
Testing and Adjusting
No Power Supply to Controller - Troubleshoot
308B, 311B, 312B, 315B, 317B, 318B, 320B, 322B, 325B, 330B, M325B and W330B Excavators Engine and Pump Control
Communication Problem Between Controller and Monitor - Troubleshoot - A201, A202 And A203
308B, 311B, 312B, 315B, 317B, 318B, 320B, 322B, 325B, 330B, M325B and W330B Excavators Engine and Pump Control
AEC Is Abnormal - Troubleshoot
308B, 311B, 312B, 315B, 317B, 318B, 320B, 322B, 325B, 330B, M325B and W330B Excavators Engine and Pump Control
Check of Feedback Signal From Governor Actuator - Troubleshoot - 2201, 2202, 2301 And 2302
308B, 311B, 312B, 315B, 317B, 318B, 320B, 322B, 325B, 330B, M325B and W330B Excavators Engine and Pump Control
Controllability Is Bad in Boom Priority Mode - Troubleshoot - 4105
308B, 311B, 312B, 315B, 317B, 318B, 320B, 322B, 325B, 330B, M325B and W330B Excavators Engine and Pump Control
Stick Moves Slowly - Troubleshoot - 4106
308B, 311B, 312B, 315B, 317B, 318B, 320B, 322B, 325B, 330B, M325B and W330B Excavators Engine and Pump Control
Swing Torque Is Weak in Swing Priority Mode - Troubleshoot - 4105
308B, 311B, 312B, 315B, 317B, 318B, 320B, 322B, 325B, 330B, M325B and W330B Excavators Engine and Pump Control
Automatic Travel Speed Change Is Abnormal - Troubleshoot - 4107, 4204 And 4207
308B, 311B, 312B, 315B, 317B, 318B, 320B, 322B, 325B, 330B, M325B and W330B Excavators Engine and Pump Control
Swing Is Inoperable - Troubleshoot - 410A
308B, 311B, 312B, 315B, 317B, 318B, 320B, 322B, 325B, 330B, M325B and W330B Excavators Engine and Pump Control
Calibration Data Error - Troubleshoot - 2304
308B, 311B, 312B, 315B, 317B, 318B, 320B, 322B, 325B, 330B, M325B and W330B Excavators Engine and Pump Control
Engine Stalls - Troubleshoot - 4303
308B, 311B, 312B, 315B, 317B, 318B, 320B, 322B, 325B, 330B, M325B and W330B Excavators Engine and Pump Control
Initial Troubleshooting Procedure
308B, 311B, 312B, 315B, 317B, 318B, 320B, 322B, 325B, 330B, M325B and W330B Excavators Engine and Pump Control
General Information
308B, 311B, 312B, 315B, 317B, 318B, 320B, 322B, 325B, 330B, M325B and W330B Excavators Engine and Pump Control
Controller Input and Output Values
308B, 311B, 312B, 315B, 317B, 318B, 320B, 322B, 325B, 330B, M325B and W330B Excavators Engine and Pump Control
Using Service Mode
308B, 311B, 312B, 315B, 317B, 318B, 320B, 322B, 325B, 330B, M325B and W330B Excavators Engine and Pump Control
Parameter Status Checks
308B, 311B, 312B, 315B, 317B, 318B, 320B, 322B, 325B, 330B, M325B and W330B Excavators Engine and Pump Control
Real Time Error Codes
308B, 311B, 312B, 315B, 317B, 318B, 320B, 322B, 325B, 330B, M325B and W330B Excavators Engine and Pump Control
Error Log
308B, 311B, 312B, 315B, 317B, 318B, 320B, 322B, 325B, 330B, M325B and W330B Excavators Engine and Pump Control
Digital Output On/Off - Test
308B, 311B, 312B, 315B, 317B, 318B, 320B, 322B, 325B, 330B, M325B and W330B Excavators Engine and Pump Control
Parameter - Adjust
308B, 311B, 312B, 315B, 317B, 318B, 320B, 322B, 325B, 330B, M325B and W330B Excavators Engine and Pump Control
Controller - Replace
308B, 311B, 312B, 315B, 317B, 318B, 320B, 322B, 325B, 330B, M325B and W330B Excavators Engine and Pump Control
System Schematic
308B, 311B, 312B, 315B, 317B, 318B, 320B, 322B, 325B, 330B, M325B and W330B Excavators Engine and Pump Control
Troubleshooting Undiagnosed Problems
308B, 311B, 312B, 315B, 317B, 318B, 320B, 322B, 325B, 330B, M325B and W330B Excavators Engine and Pump Control
Hydraulic Hammer - Adjust
308B, 311B, 312B, 315B, 317B, 318B, 320B, 322B, 325B, 330B, M325B and W330B Excavators Engine and Pump Control
Troubleshooting Diagnostic Codes
308B, 311B, 312B, 315B, 317B, 318B, 320B, 322B, 325B, 330B, M325B and W330B Excavators Engine and Pump Control
Controller - Replace
320B, 322B, 325B, 330B, 345B and 345B Series II Excavators Auxiliary Hydraulic System
Service Magazine
New Oil Pressure Switch Used With EMS Systems{7485}
1986/03/10
Ether Starting Aid System Improves Cold Weather Starts{1456}
1979/03/19
Electronic Control Modules and Computer Viruses {7610}
2000/12/04
Parts Information for Locating Components of New Electronic Systems in SIS and Parts Manual {7602, 7631}
2001/04/09
Correction to Systems Operation/Testing and Adjusting , "Using Service Mode" {7569}
2002/07/15
New Software and a New Rotary Switch Improve the Reliability of the Engine Speed Dial on Excavators {1408, 7332, 7610, 7620}
2009/04/13
New Firmware Is Now Available for Communications Adapter 3 {7610, 7620}
2011/10/20
Auto Clearing of Diagnostics and Events from Electronic Control Module (ECM) {1901, 1920, 7610, 7620}
2012/08/10
Updated Flash Procedure for All Caterpillar Products {1920, 7610, 7620}
2014/09/16
New Software Flash File Extension Requires Caterpillar Electronic Technician (Cat ET) 2013B {0785, 7620}
2013/07/25
Cat<SUP>&reg;</SUP> Reman Now Offers Additional Control Modules for Certain Machine Engines {1901, 7610}
2014/10/14
Military Electronic Technician (Military ET) Is Now Available For Military Personnel {0374, 0376, 0599, 1000, 7000, 7610, 7620}
Military Electronic Technician (Military ET) Is Now Available For Military Personnel {0374, 0376, 0599, 1000, 7000, 7610, 7620}
New Machine Software for Cat<SUP>&reg;</SUP> Product Link Is Now Available on Certain Cat<SUP>&reg;</SUP> Products {7490, 7606, 7610, 7620}
New Machine Software for Cat® Product Link Is Now Available on Certain Cat® Products {7490, 7606, 7610, 7620}
Cat<SUP>&reg;</SUP> Reman Now Offers Additional Control Modules for Certain Machine Engines {1901, 7610}
2014/10/14
Special Instruction
Upgrading Alternators To Include An Integrated Circuit Regulator{1405, 1410}
Upgrading Alternators To Include An Integrated Circuit Regulator{1405, 1410}
Service Magazine
New Regulator And Field Coil Assemblies Used{1410,1405}
1981/11/23
Voltage Regulator Cross Reference Chart{1410,1405}
1985/07/01
Service Letter-NACD
PRODUCT SUPPORT PROGRAM FOR REPLACING THE RADIO CONVERTER ON VARIOUS EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE RADIO CONVERTER ON VARIOUS EXCAVATORS
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-China
Service Letter-Asia
Service Letter-APD
Service Magazine
Catalytic Converter And Exhaust Conditioning Products Available{1091}
1995/01/16
Special Instruction
Use of the 4C6534 Speed Switch Calibration Harness{0781, 0785}
Use of the 4C6534 Speed Switch Calibration Harness{0781, 0785}
Retrofit Installation of Coolant Loss Sensor{1353, 1395, 7422, 7470}
Retrofit Installation of Coolant Loss Sensor{1353, 1395, 7422, 7470}
Operation And Maintenance Of 1P3060 Pyrometer Group{0776}
Operation And Maintenance Of 1P3060 Pyrometer Group{0776}
Battery Ratings And Cross Reference Chart{1401}
Battery Ratings And Cross Reference Chart{1401}
Service Magazine
Replacement Of Brush Holder Pins In Delco-Remy Electric Starting Motors{1453}
1982/06/28
Use FT1711 Light Table For Cylinder Liner Inspection {0652,1216}
1982/11/29
Maintenance Free Batteries{1401}
1986/03/10
New Oil Pressure Switch Used With EMS Systems{7485}
1986/03/10
Requirements For Shipping Wet Batteries In The U.S.{1401,7500}
1986/04/07
Heavy-Duty Line Of Batteries Available To U.S. Dealers{1400,1401}
1986/09/01
Adjust Bosch Solenoid If Replaced Or Reinstalled{1407,1453}
1986/11/10
Check For Dirt Before Replacing Pyrometer Switch{1050,7466}
1986/12/15
Safety Vent Caps For Caterpillar Batteries{1401}
1977/07/11
12-Volt Starter Solenoid Available For 7T2265 And 7T2266 Starting Motors{1407}
1987/02/16
Polarity Connections And Use Of Service Meter Films When Service Meter Kits Are Installed{7480,7000}
1987/02/16
Check For Plugged Orifices In Mechanical Pressure Gauges{7450}
1987/03/02
Modification To Prevent Starter From Remaining Engaged With Flywheel After Engine Starts{1400,1450}
1987/03/16
5P957 And 5P3514 Coolant And Battery Tester{0786,1395,1401}
1987/03/23
Alternator &quot;R&quot; Terminal Wire Assembly Available For Wiring Harness Repair{1408}
1987/05/04
Testing The Starter On The Engine{1401,1450}
1987/05/04
Improved Start Switch Used{1416}
1987/05/25
Remanufactured Heavy-Duty Starters And High-Amp Alternators{1405,1453}
1987/05/25
Be Sure Battery Cable-To-Starter Connection Has Correct Torque{1453}
1988/03/14
Magnetic Switches (Starter Relays) Improved{1450}
1988/03/14
9G7641 Start Switch Is Improved{1416,1400}
1988/05/16
Maintenance-Free Batteries Require Different Troubleshooting Procedures{1401}
1988/06/20
Revised Instructions For Installation of New Maintenance Free Batteries{1401,1400}
1988/12/12
Fuse And Wire Assembly Is Available For Protection Of Earlier 6N5906 Service Meters{7480}
1979/01/29
Voltage Regulator Can Cause Variable Ammeter Indications{1410,1401,1405,1406,7467}
1979/10/22
Two Plug Assemblies (Booster Cables) Are Available To Start Machines{1401,1453}
1979/11/05
More Potting Material Now Used In 6N5906 Electric Service Meter{7480}
1979/11/26
Batteries Can Be Damaged If Too Much Vacuum Is Used During Electrolyte Fill{1401}
1979/11/26
High Performance Maintenance Free Battery Available{1401}
1989/01/16
Limitations On Engine Cranking Time{1453,1401}
1989/03/27
How To Troubleshoot A Short-To-Ground In Power Wiring{1400}
1989/03/27
Preventive Maintenance For Batteries{1401}
1989/03/27
Causes And Effects Of Low Battery Voltage On Electric Starters{1401,1453,1467}
1989/04/24
Procedure For Replacing Batteries Or Battery Cables {1401,1402,1411}
1989/05/01
Procedure For Replacing Batteries, Battery Cables Or Disconnect Switches {1401,1402,1411}
1989/05/01
Procedure For Replacing Batteries, Battery Cables Or Disconnect Switches {1401,1402,1411}
1989/05/01
Special Instruction, &quot;Battery Charging Rate And Time Tables,&quot; Available On Oil Resistant Paper{0374,1401}
1989/06/19
Fitting Needed To Install New Oil Pressure Switch When Replacing Former Switches{7485}
1991/11/25
New PRELUB Systems Available For Medium To Large Caterpillar Construction Equipment {1319}
1992/04/06
Wiring Harness Conduit Component Sizes {1408}
1995/02/13
Improved Alternator Groups Now Available{1405}
1998/05/04
Identification Of External Terminals On Alternators {1405,1406,1400}
1998/12/07
Special Instruction
Obtaining Factory Passwords and Software Enabled Attachments{7610, 7620}
Obtaining Factory Passwords and Software Enabled Attachments{7610, 7620}
Cat<SUP>&reg;</SUP> VIMS Converter Functionality {7610, 7620}
Cat® VIMS Converter Functionality {7610, 7620}
2 Wire and 4 Wire Ethernet Repair Procedure on All Cat<SUP>&reg;</SUP> Products {1408}
2 Wire and 4 Wire Ethernet Repair Procedure on All Cat® Products {1408}
Installation Procedure to Retrofit a PL321VSR Electronic Control Module (ECM) With a Pro Product Link PL641 or PL631 or PL542 Systems {7606}
Installation Procedure to Retrofit a PL321VSR Electronic Control Module (ECM) With a Pro Product Link PL641 or PL631 or PL542 Systems {7606}
Installation Procedure to Retrofit a PL522 or PL523 With a Pro Product Link PL641 or PL631 or PL542 System {7606}
Installation Procedure to Retrofit a PL522 or PL523 With a Pro Product Link PL641 or PL631 or PL542 System {7606}
Service Magazine
Auto Clearing of Diagnostics and Events from Electronic Control Module (ECM) {1901, 1920, 7610, 7620}
2012/08/10
New Software Flash File Extension Requires Caterpillar Electronic Technician (Cat ET) 2013B {0785, 7620}
2013/07/25
"Maintenance Mode" in Product Link is Used to Prevent Codes From Being Transmitted When Performing Service to a Machine or Engine {7606}
2014/11/24
Instructions for Preventing Utilization Messages Being Reported with Duplicate Time Stamps from PL321VSR Satellite Devices {7601}
2015/09/02
New Software Is Now Available for Cat<SUP>&reg;</SUP> Product Link {7606, 7610, 7620}
New Software Is Now Available for Cat® Product Link {7606, 7610, 7620}
New Machine Software for Cat<SUP>&reg;</SUP> Product Link Is Now Available on Certain Cat<SUP>&reg;</SUP> Products {7490, 7606, 7610, 7620}
New Machine Software for Cat® Product Link Is Now Available on Certain Cat® Products {7490, 7606, 7610, 7620}
A New Special Instruction for Installation Procedure to Retrofit a PL321VSR Electronic Control Module (ECM) With a Pro Product Link PL641 or PL631 or PL542 Systems is Now Available {7606}
A New Special Instruction for Installation Procedure to Retrofit a PL321VSR Electronic Control Module (ECM) With a Pro Product Link PL641 or PL631 or PL542 Systems is Now Available {7606}
A New Special Instruction for Installation Procedure to Retrofit a PL522 or PL523 With a Pro Product Link PL641 or PL631 or PL542 Systems is Now Available {7606}
A New Special Instruction for Installation Procedure to Retrofit a PL522 or PL523 With a Pro Product Link PL641 or PL631 or PL542 Systems is Now Available {7606}
Event Identification Number (EID) Above 60000 is Now Used on All Cat<SUP>&reg;</SUP> Products {1400}
Event Identification Number (EID) Above 60000 is Now Used on All Cat® Products {1400}
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Shorter Mounting Bolts Used For Glow Plug Wiring{1403,1412}
1979/05/21
Tee Handle Hexagonal Wrench In Rack Adjusting Tool Is Now Available For Parts Replacement
1979/09/10
Correction to Service Magazine, &quot;Improved 24 Volt Horns Available&quot; {7402}
2001/12/17
Two, New Top Dead Center Magnetic Transducers Available{0651,0653,1214,1250}
1985/10/07
Special Instruction
Service Information And Use of 6V3100 Engine Timing Indicator Group{0782}
Service Information And Use of 6V3100 Engine Timing Indicator Group{0782}
Service Magazine
Service Information For Easier Use Of The 6V3100 Timing Indicator Group{0651,1250,1156,1157}
1982/10/11
Use Caterpillar 6V50 Engine Timing Indicator For Accurate Readings{0782,0785,0775}
1985/05/27
Check 5P7435 Tee Adapter Groups In The 6V3100 Engine Timing Indicator Groups{0782}
1985/06/03
New Engine Timing Indicator Group Available {0781,0782}
1986/07/07
Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups{0781}
1987/03/16
Improved End - of - Line - Test Fixture for the Product Link Antenna is Now Used {7606}
2006/11/13
Operation and Maintenance Manual
Cab Dome Light
330B L and 330B LN Excavators
Cab Dome Light
320B, 322B, 325B, 330B and 345B Excavators
Cab Dome Light
320B, 322B, 325B, 330B and 345B Excavators
Special Instruction
Installation of Electric Starting Motors{1453}
Installation of Electric Starting Motors{1453}
Installation Guide for the 35-Watt High Intensity Discharge (HID) Light{1429}
Installation Guide for the 35-Watt High Intensity Discharge (HID) Light{1429}
Specifications
Chassis Lighting - Additional Fuel Tank
330B Excavator Machine System Specifications
Boom Lighting
330B Excavator Machine System Specifications
Service Magazine
Replacement Of Brush Holder Pins In Delco-Remy Electric Starting Motors{1453}
1982/06/28
Use FT1711 Light Table For Cylinder Liner Inspection {0652,1216}
1982/11/29
Modification To Prevent Starter From Remaining Engaged With Flywheel After Engine Starts{1400,1450}
1987/03/16
Testing The Starter On The Engine{1401,1450}
1987/05/04
Magnetic Switches (Starter Relays) Improved{1450}
1988/03/14
Cranking Speeds Necessary To Start Diesel Engines{0374,1000,1450}
1979/09/24
Wiring Harness Conduit Component Sizes {1408}
1995/02/13
A New Halogen Lamp Is Now Available for Certain Cat Products {1434}
2011/06/29
An Improved Halogen Lamp is Now Available for Certain Excavators {1434}
An Improved Halogen Lamp is Now Available for Certain Excavators {1434}
Special Instruction
Battery Ratings And Cross Reference Chart{1401}
Battery Ratings And Cross Reference Chart{1401}
Service Magazine
Use The 6V2056 Rod And 6V2057 Point To Find True Top Center{0653}
1980/07/14
New Regulator And Field Coil Assemblies Used{1410,1405}
1981/11/23
Replacement Of Brush Holder Pins In Delco-Remy Electric Starting Motors{1453}
1982/06/28
Use Caterpillar 6V50 Engine Timing Indicator For Accurate Readings{0782,0785,0775}
1985/05/27
Voltage Regulator Cross Reference Chart{1410,1405}
1985/07/01
Two, New Top Dead Center Magnetic Transducers Available{0651,0653,1214,1250}
1985/10/07
Maintenance Free Batteries{1401}
1986/03/10
New Oil Pressure Switch Used With EMS Systems{7485}
1986/03/10
Requirements For Shipping Wet Batteries In The U.S.{1401,7500}
1986/04/07
Heavy-Duty Line Of Batteries Available To U.S. Dealers{1400,1401}
1986/09/01
Adjust Bosch Solenoid If Replaced Or Reinstalled{1407,1453}
1986/11/10
Check For Dirt Before Replacing Pyrometer Switch{1050,7466}
1986/12/15
Safety Vent Caps For Caterpillar Batteries{1401}
1977/07/11
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures{1259}
1977/08/08
Modification To Prevent Starter From Remaining Engaged With Flywheel After Engine Starts{1400,1450}
1987/03/16
5P957 And 5P3514 Coolant And Battery Tester{0786,1395,1401}
1987/03/23
Identification Of External Terminals On Alternators{1405,1406,1400}
1987/03/23
Use Improved Heat Start Switch{1416}
1987/04/20
Products Equipped With Diagnostic Connectors Require Less Time For Electrical Troubleshooting{1400}
1987/05/04
Alternator &quot;R&quot; Terminal Wire Assembly Available For Wiring Harness Repair{1408}
1987/05/04
Alternator/Generator Output Test On The Engine{1401,1404,1405,1406}
1987/05/04
Testing The Starter On The Engine{1401,1450}
1987/05/04
Check Alternator Output Connection Prior To Machine Delivery{1405}
1987/05/18
Improved Start Switch Used{1416}
1987/05/25
Remanufactured Heavy-Duty Starters And High-Amp Alternators{1405,1453}
1987/05/25
Correct Torque Value For Alternator Drive Pulley Retaining Nut Is Important{1405}
1987/11/23
9G7641 Start Switch Is Improved{1416,1400}
1988/05/16
Maintenance-Free Batteries Require Different Troubleshooting Procedures{1401}
1988/06/20
Revised Instructions For Installation of New Maintenance Free Batteries{1401,1400}
1988/12/12
Ether Starting Aid System Improves Cold Weather Starts{1456}
1979/03/19
Shorter Mounting Bolts Used For Glow Plug Wiring{1403,1412}
1979/05/21
New 35-Ampere Alternator Used On Some Engines In Caterpillar Equipment{1405,1406}
1979/08/13
Cranking Speeds Necessary To Start Diesel Engines{0374,1000,1450}
1979/09/24
Two Plug Assemblies (Booster Cables) Are Available To Start Machines{1401,1453}
1979/11/05
Batteries Can Be Damaged If Too Much Vacuum Is Used During Electrolyte Fill{1401}
1979/11/26
General Information -- Diesel Fuels In Cold Temperature Operation{1280}
1979/12/17
High Performance Maintenance Free Battery Available{1401}
1989/01/16
Limitations On Engine Cranking Time{1453,1401}
1989/03/27
How To Troubleshoot A Short-To-Ground In Power Wiring{1400}
1989/03/27
Preventive Maintenance For Batteries{1401}
1989/03/27
Causes And Effects Of Low Battery Voltage On Electric Starters{1401,1453,1467}
1989/04/24
Procedure For Replacing Batteries Or Battery Cables {1401,1402,1411}
1989/05/01
Special Instruction, &quot;Battery Charging Rate And Time Tables,&quot; Available On Oil Resistant Paper{0374,1401}
1989/06/19
Fitting Needed To Install New Oil Pressure Switch When Replacing Former Switches{7485}
1991/11/25
Catalytic Converter And Exhaust Conditioning Products Available{1091}
1995/01/16
Special Instruction
Installation of Electric Starting Motors{1453}
Installation of Electric Starting Motors{1453}
Service Magazine
Replacement Of Brush Holder Pins In Delco-Remy Electric Starting Motors{1453}
1982/06/28
Part Numbers for Electric Motors That Are Used in HVAC Have Changed {5927}
2001/01/22
An Improved Starting Motor is Now Available {1453}
2009/10/15
A New Starter Solenoid is Now Available {1467}
2008/03/17
Operation and Maintenance Manual
Circuit Breakers - Reset
330B L and 330B LN Excavators
Special Instruction
Circuit Breaker Harness Assembly {1420}
Circuit Breaker Harness Assembly {1420}
Service Magazine
New Switch Assembly in Breaker Panel Groups Improves Reliability of Main Power Relay {1417,1423}
1999/06/28
Special Instruction
Circuit Breaker Harness Assembly {1420}
Circuit Breaker Harness Assembly {1420}
Service Magazine
New Switch Assembly in Breaker Panel Groups Improves Reliability of Main Power Relay {1417,1423}
1999/06/28
Parts are Now Available to Make Jump Start Receptacle on Cat<SUP>&reg;</SUP> Product {1463}
2014/03/04
Special Instruction
Upgrading Alternators To Include An Integrated Circuit Regulator{1405, 1410}
Upgrading Alternators To Include An Integrated Circuit Regulator{1405, 1410}
Service Magazine
New Regulator And Field Coil Assemblies Used{1410,1405}
1981/11/23
Voltage Regulator Cross Reference Chart{1410,1405}
1985/07/01
Voltage Regulator Can Cause Variable Ammeter Indications{1410,1401,1405,1406,7467}
1979/10/22
Special Instruction
Retrofit Installation of Coolant Loss Sensor{1353, 1395, 7422, 7470}
Retrofit Installation of Coolant Loss Sensor{1353, 1395, 7422, 7470}
Systems Operation
Senders
308B, 311B, 312B, 315B, 317B, 318B, 320B, 322B, 325B, 330B, M325B and W330B Excavators Engine and Pump Control
Service Magazine
Improvements to the Fuel Sender Group {1273, 1408, 6201, 7481, 7857}
2011/03/22
Special Instruction
Retrofit Installation of Coolant Loss Sensor{1353, 1395, 7422, 7470}
Retrofit Installation of Coolant Loss Sensor{1353, 1395, 7422, 7470}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Tool Operating Manual
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Systems Operation
Sensors
308B, 311B, 312B, 315B, 317B, 318B, 320B, 322B, 325B, 330B, M325B and W330B Excavators Engine and Pump Control
Reuse And Salvage Guidelines
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Testing and Adjusting
Check of Speed Sensor - Troubleshoot - 4201 And 4302
308B, 311B, 312B, 315B, 317B, 318B, 320B, 322B, 325B, 330B, M325B and W330B Excavators Engine and Pump Control
Speed Sensor - Replace
308B, 311B, 312B, 315B, 317B, 318B, 320B, 322B, 325B, 330B, M325B and W330B Excavators Engine and Pump Control
Troubleshooting
MID 122 - CID 0269 - FMI 03
Product Link 121S/300
MID 122 - CID 0269 - FMI 04
Product Link 121S/300
Disassembly and Assembly
Coolant Temperature Sensor - Remove and Install
3304B and 3306B Engines for Caterpillar Built Machines
Engine Oil Pressure Sensor - Remove and Install
3304B and 3306B Engines for Caterpillar Built Machines
Service Magazine
New Oil Pressure Switch Used With EMS Systems{7485}
1986/03/10
Ether Starting Aid System Improves Cold Weather Starts{1456}
1979/03/19
The Improved Pressure Sensor Increases Reliability and Durability {5574}
2000/07/31
Procedure Now Available to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
2013/02/28
Special Instruction
Installation of 5L8984, 3N584 and 8N1571 Solenoid Shutoff Groups{1259}
Installation of 5L8984, 3N584 and 8N1571 Solenoid Shutoff Groups{1259}
Specifications
Fuel Shutoff Solenoid
3306C Engines for Caterpillar Built Machines
Fuel Shutoff Solenoid
3306C Engines for Caterpillar Built Machines
Air Shutoff Solenoid
3306C Engines for Caterpillar Built Machines
Fuel Shutoff Solenoid
3306C Engines for Caterpillar Built Machines
Service Magazine
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures{1259}
1977/08/08
New Fuel Shutoff Solenoids With Improved Durability Available {1259}
1999/03/22
Correction to Service Magazine, SEPD0541 , "Explanation of Fuel Shutoff Solenoid Operation" {1259}
2001/01/08
Special Instruction
Installation of 5L8984, 3N584 and 8N1571 Solenoid Shutoff Groups{1259}
Installation of 5L8984, 3N584 and 8N1571 Solenoid Shutoff Groups{1259}
Specifications
Fuel Shutoff Solenoid
3306C Engines for Caterpillar Built Machines
Fuel Shutoff Solenoid
3306C Engines for Caterpillar Built Machines
Fuel Shutoff Solenoid
3306C Engines for Caterpillar Built Machines
Disassembly and Assembly
Shutoff Solenoid
SUPPLEMENT FOR 330B, 330B L, & 330B LN EXCAVATORS - 3306 ENG
Solenoid Valves
330B, 330B L & 330B LN EXCAVATORS MACHINE SYSTEMS
Service Magazine
Adjust Bosch Solenoid If Replaced Or Reinstalled{1407,1453}
1986/11/10
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures{1259}
1977/08/08
12-Volt Starter Solenoid Available For 7T2265 And 7T2266 Starting Motors{1407}
1987/02/16
Magnetic Switches (Starter Relays) Improved{1450}
1988/03/14
Causes And Effects Of Low Battery Voltage On Electric Starters{1401,1453,1467}
1989/04/24
New Fuel Shutoff Solenoids With Improved Durability Available {1259}
1999/03/22
Correction to Service Magazine, SEPD0541 , "Explanation of Fuel Shutoff Solenoid Operation" {1259}
2001/01/08
Special Instruction
Installation of 5L8984, 3N584 and 8N1571 Solenoid Shutoff Groups{1259}
Installation of 5L8984, 3N584 and 8N1571 Solenoid Shutoff Groups{1259}
Disassembly and Assembly
Shutoff Solenoid
SUPPLEMENT FOR 330B, 330B L, & 330B LN EXCAVATORS - 3306 ENG
Fuel Shutoff Solenoid - Remove and Install
3304B and 3306B Engines for Caterpillar Built Machines
Service Magazine
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures{1259}
1977/08/08
New Fuel Shutoff Solenoids With Improved Durability Available {1259}
1999/03/22
Operation and Maintenance Manual
Ether Starting Aid - If Equipped
330B L and 330B LN Excavators
Ether Starting Aid Cylinder - Replace
330B L and 330B LN Excavators
Specifications
Ether Starting Aid
3306C Engines for Caterpillar Built Machines
Service Magazine
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Ether Starting Aid System Improves Cold Weather Starts{1456}
1979/03/19
Shorter Mounting Bolts Used For Glow Plug Wiring{1403,1412}
1979/05/21
General Information -- Diesel Fuels In Cold Temperature Operation{1280}
1979/12/17
A New Ether Cylinder O-ring is Now Used on All Caterpillar Products {1456}
2013/09/24
Special Instruction
Installation of Electric Starting Motors{1453}
Installation of Electric Starting Motors{1453}
Service Magazine
Modification To Prevent Starter From Remaining Engaged With Flywheel After Engine Starts{1400,1450}
1987/03/16
Testing The Starter On The Engine{1401,1450}
1987/05/04
Magnetic Switches (Starter Relays) Improved{1450}
1988/03/14
Ether Starting Aid System Improves Cold Weather Starts{1456}
1979/03/19
Cranking Speeds Necessary To Start Diesel Engines{0374,1000,1450}
1979/09/24
General Service Information
Introduction
DELCO REMY CRANKING MOTORS 30-MT, 35-MT, 40-MT, 50-MT SERIES
Delco Remy
DELCO REMY CRANKING MOTORS 30-MT, 35-MT, 40-MT, 50-MT SERIES
Engine News
Caterpillar Remanufactured Electric Starting Motors Are Improved {1453}
2011/05/16
Special Instruction
Installation of Electric Starting Motors{1453}
Installation of Electric Starting Motors{1453}
Caterpillar PRELUB<SUP>&reg;</SUP> Diagnostics{1469}
Caterpillar PRELUB® Diagnostics{1469}
Starting Motor Solenoid - Replace {1467}
Starting Motor Solenoid - Replace {1467}
Solenoid (Starting Motor) &minus; Replace{1467}
Solenoid (Starting Motor) − Replace{1467}
Installation of New Shift Lever Assembly for All Starter Motors {1453}
Installation of New Shift Lever Assembly for All Starter Motors {1453}
Procedure to Install the Insulator on to Series Starters on All Engines {1453}
Procedure to Install the Insulator on to Series Starters on All Engines {1453}
Installation of Repair Kit-Solenoid Plunger Assembly on All Engines {1453}
Installation of Repair Kit-Solenoid Plunger Assembly on All Engines {1453}
Procedure to Install Terminal Kit on All Engines {1453}
Procedure to Install Terminal Kit on All Engines {1453}
Procedure to Install Brush Holder Assembly in All Engines {1453}
Procedure to Install Brush Holder Assembly in All Engines {1453}
Procedure to Replace Armature of Starter Motor On All Cat<SUP>&reg;</SUP> Products {1408, 1450, 1453}
Procedure to Replace Armature of Starter Motor On All Cat® Products {1408, 1450, 1453}
Procedure to Replace Commutator End (CE) Housing of Starter Motor On All Cat<SUP>&reg;</SUP> Products {1408, 1450, 1453}
Procedure to Replace Commutator End (CE) Housing of Starter Motor On All Cat® Products {1408, 1450, 1453}
Procedure to Replace Drive Assembly of Starter Motor On All Cat<SUP>&reg;</SUP> Products {1453}
Procedure to Replace Drive Assembly of Starter Motor On All Cat® Products {1453}
Specifications
Electric Starting Motor
3306C Engines for Caterpillar Built Machines
Starting Motor
37-MT, 41-MT, and 42-MT Series Starting Motors
Starting Motor
Starting Motor - Delco 50-MT
Systems Operation
General Information
37-MT, 41-MT, and 42-MT Series Starting Motors
Component Description
37-MT, 41-MT, and 42-MT Series Starting Motors
Normal Operation
37-MT, 41-MT, and 42-MT Series Starting Motors
Component Description
Starting Motor - Delco 50-MT
General Information
Starting Motor - Delco 50-MT
Normal Operation
Starting Motor - Delco 50-MT
Testing and Adjusting
Electric Starting System - Test
3306C Engines for Caterpillar Built Machines
Pinion Clearance - Adjust
3306C Engines for Caterpillar Built Machines
No Load - Test
37-MT, 41-MT, and 42-MT Series Starting Motors
Brush and Brush Holder - Check
37-MT, 41-MT, and 42-MT Series Starting Motors
Pinion Clearance - Adjust
37-MT, 41-MT, and 42-MT Series Starting Motors
Starting Motor Solenoid - Test
37-MT, 41-MT, and 42-MT Series Starting Motors
Pinion Clearance - Adjust
3306C Engines for Caterpillar Built Machines
Starting Motor Solenoid - Test
Starting Motor - Delco 50-MT
Field Winding - Test
Starting Motor - Delco 50-MT
Armature - Test
Starting Motor - Delco 50-MT
Brush and Brush Holder - Check
Starting Motor - Delco 50-MT
Pinion Drive - Check
Starting Motor - Delco 50-MT
No Load - Test
Starting Motor - Delco 50-MT
Pinion Clearance - Adjust
Starting Motor - Delco 50-MT
Troubleshooting
Engine Does Not Crank with Starting Motor On and Pinion Engaging Ring Gear
37-MT, 41-MT, and 42-MT Series Starting Motors
Starting Motor Does Not Turn or Turns Slowly
37-MT, 41-MT, and 42-MT Series Starting Motors
General Information
37-MT, 41-MT, and 42-MT Series Starting Motors
General Information
Starting Motor - Delco 50-MT
Pinion Does Not Engage Ring Gear
Starting Motor - Delco 50-MT
Engine Does Not Crank with Starting Motor On and Pinion Engaging Ring Gear
Starting Motor - Delco 50-MT
Starting Motor Continues to Operate after Start Switch Has Been Released
Starting Motor - Delco 50-MT
Pinion Continues to Engage after Engine Starts
Starting Motor - Delco 50-MT
Starting Motor Does Not Turn or Turns Slowly
Starting Motor - Delco 50-MT
Disassembly and Assembly
Electric Starting Motor
SUPPLEMENT FOR 330B, 330B L, & 330B LN EXCAVATORS - 3306 ENG
Starting Motor - Disassemble - 37-MT and 41-MT
37-MT, 41-MT, and 42-MT Series Starting Motors
General Information
37-MT, 41-MT, and 42-MT Series Starting Motors
Starting Motor - Assemble - 37-MT and 41-MT
37-MT, 41-MT, and 42-MT Series Starting Motors
Starting Motor - Disassemble - 42-MT
37-MT, 41-MT, and 42-MT Series Starting Motors
Starting Motor - Assemble - 42-MT
37-MT, 41-MT, and 42-MT Series Starting Motors
General Information
Starting Motor - Delco 50-MT
Starting Motor - Disassemble
Starting Motor - Delco 50-MT
Starting Motor - Assemble
Starting Motor - Delco 50-MT
Service Magazine
Replacement Of Brush Holder Pins In Delco-Remy Electric Starting Motors{1453}
1982/06/28
Adjust Bosch Solenoid If Replaced Or Reinstalled{1407,1453}
1986/11/10
12-Volt Starter Solenoid Available For 7T2265 And 7T2266 Starting Motors{1407}
1987/02/16
Modification To Prevent Starter From Remaining Engaged With Flywheel After Engine Starts{1400,1450}
1987/03/16
Testing The Starter On The Engine{1401,1450}
1987/05/04
Remanufactured Heavy-Duty Starters And High-Amp Alternators{1405,1453}
1987/05/25
Be Sure Battery Cable-To-Starter Connection Has Correct Torque{1453}
1988/03/14
Magnetic Switches (Starter Relays) Improved{1450}
1988/03/14
Two Plug Assemblies (Booster Cables) Are Available To Start Machines{1401,1453}
1979/11/05
Limitations On Engine Cranking Time{1453,1401}
1989/03/27
Causes And Effects Of Low Battery Voltage On Electric Starters{1401,1453,1467}
1989/04/24
New PRELUB Systems Available For Medium To Large Caterpillar Construction Equipment {1319}
1992/04/06
0R5207 Remanufactured Starter May Not Fit In Some Applications{1453}
1993/11/29
Improved Remanufactured Heavy-Duty Electrical Starting Motors Are Available {1453}
2001/10/29
Field Replacement of Remanufactured Starting Motors and Remanufactured Alternators {1405, 1453}
2001/11/19
New Starting Motors Used {1453}
2002/05/13
Examine Failed Starting Motors to Understand the Reason for Failure {1453}
2002/10/28
Improved Remanufactured Heavy-Duty Starting Motors Are Available {1453}
2003/11/10
New Test Procedure For Testing Air Conditioning Electrical Components {4466,1435}
1999/11/29
Operation and Maintenance Manual
Engine Start Switch
330B L and 330B LN Excavators
Battery Disconnect Switch
330B L and 330B LN Excavators
Light Switches
330B L and 330B LN Excavators
Special Instruction
Use of the 4C6534 Speed Switch Calibration Harness{0781, 0785}
Use of the 4C6534 Speed Switch Calibration Harness{0781, 0785}
Battery Ratings And Cross Reference Chart{1401}
Battery Ratings And Cross Reference Chart{1401}
Installation of 183-9371 Coupler Lines Gp (KIT, WEDGE LOCK){1408, 5000, 5051, 5057, 6129, 7000, 7332}
Installation of 183-9371 Coupler Lines Gp (KIT, WEDGE LOCK){1408, 5000, 5051, 5057, 6129, 7000, 7332}
Procedure to Install 169-9513 Hydraulic Kit on Certain Excavators{1408, 5057, 5479, 6129}
Procedure to Install 169-9513 Hydraulic Kit on Certain Excavators{1408, 5057, 5479, 6129}
Repair/Replacement Procedure for <NOBR> 5C-6108</NOBR> Refueling Switch {1295}
Repair/Replacement Procedure for 5C-6108 Refueling Switch {1295}
Service Letter-NACD
A Pilot Drain Hose Will Need To Be Relocated To The Smartboom Disable Switch On Certain 320B, 322B, 325B, 330B And 345B Excavators
A Pilot Drain Hose Will Need To Be Relocated To The Smartboom Disable Switch On Certain 320B, 322B, 325B, 330B And 345B Excavators
Service Letter-CSARL
Technical Information Bulletin
Auxiliary Control Pedal (4th) Is Still Active Even Though Backup Switch Is Activated In Manual Backup Mode
Auxiliary Control Pedal (4th) Is Still Active Even Though Backup Switch Is Activated In Manual Backup Mode
Check For Correct Operation Of Oil Level Switch
Check For Correct Operation Of Oil Level Switch
Backup Switch For The Auxiliary Controller May Be Wired Incorrectly
Backup Switch For The Auxiliary Controller May Be Wired Incorrectly
Machine Start Switch Key May Not Fit Properly{1416}
Machine Start Switch Key May Not Fit Properly{1416}
Systems Operation
Switches
308B, 311B, 312B, 315B, 317B, 318B, 320B, 322B, 325B, 330B, M325B and W330B Excavators Engine and Pump Control
Pressure Switch (Refrigerant)
Air Conditioning and Heating R134a for All Caterpillar Machines
Testing and Adjusting
Low Idle Switch Does Not Work - Troubleshoot
308B, 311B, 312B, 315B, 317B, 318B, 320B, 322B, 325B, 330B, M325B and W330B Excavators Engine and Pump Control
Service Magazine
Maintenance Free Batteries{1401}
1986/03/10
New Oil Pressure Switch Used With EMS Systems{7485}
1986/03/10
Requirements For Shipping Wet Batteries In The U.S.{1401,7500}
1986/04/07
Heavy-Duty Line Of Batteries Available To U.S. Dealers{1400,1401}
1986/09/01
Check For Dirt Before Replacing Pyrometer Switch{1050,7466}
1986/12/15
Safety Vent Caps For Caterpillar Batteries{1401}
1977/07/11
5P957 And 5P3514 Coolant And Battery Tester{0786,1395,1401}
1987/03/23
Use Improved Heat Start Switch{1416}
1987/04/20
Alternator/Generator Output Test On The Engine{1401,1404,1405,1406}
1987/05/04
Testing The Starter On The Engine{1401,1450}
1987/05/04
Improved Start Switch Used{1416}
1987/05/25
Magnetic Switches (Starter Relays) Improved{1450}
1988/03/14
9G7641 Start Switch Is Improved{1416,1400}
1988/05/16
Maintenance-Free Batteries Require Different Troubleshooting Procedures{1401}
1988/06/20
Revised Instructions For Installation of New Maintenance Free Batteries{1401,1400}
1988/12/12
Voltage Regulator Can Cause Variable Ammeter Indications{1410,1401,1405,1406,7467}
1979/10/22
Two Plug Assemblies (Booster Cables) Are Available To Start Machines{1401,1453}
1979/11/05
Batteries Can Be Damaged If Too Much Vacuum Is Used During Electrolyte Fill{1401}
1979/11/26
High Performance Maintenance Free Battery Available{1401}
1989/01/16
Limitations On Engine Cranking Time{1453,1401}
1989/03/27
Preventive Maintenance For Batteries{1401}
1989/03/27
Causes And Effects Of Low Battery Voltage On Electric Starters{1401,1453,1467}
1989/04/24
Procedure For Replacing Batteries Or Battery Cables {1401,1402,1411}
1989/05/01
Procedure For Replacing Batteries, Battery Cables Or Disconnect Switches {1401,1402,1411}
1989/05/01
Procedure For Replacing Batteries, Battery Cables Or Disconnect Switches {1401,1402,1411}
1989/05/01
Special Instruction, &quot;Battery Charging Rate And Time Tables,&quot; Available On Oil Resistant Paper{0374,1401}
1989/06/19
Fitting Needed To Install New Oil Pressure Switch When Replacing Former Switches{7485}
1991/11/25
Wiring Harness Conduit Component Sizes {1408}
1995/02/13
Improved Prelube Pressure Switch Available {1400,1435,1319}
1995/09/11
New Switch Assembly In The Oil Pan Group Is More Accurate {1302,7422}
1998/08/24
The Correct Procedure For Starting The Engine Provides Accurate Prestart Fluid Level Monitoring On Electronic Monitor {7490,1416}
1998/11/23
New Switch Assembly in Breaker Panel Groups Improves Reliability of Main Power Relay {1417,1423}
1999/06/28
New Test Procedure For Testing Air Conditioning Electrical Components {4466,1435}
1999/11/29
The Oil Level Switch for the Engine Oil and for the Hydraulic Oil Is Improved {1302, 5056, 7422}
2011/08/03
Key Must Be Oriented Correctly in Order to Avoid Damage to the Key or Start Switch {1416}
2003/10/27
Troubleshooting the Rotary Switch Assembly for the Engine Speed {1408, 7332}
2008/08/18
New Software and a New Rotary Switch Improve the Reliability of the Engine Speed Dial on Excavators {1408, 7332, 7610, 7620}
2009/04/13
Improved Procedure for Verifying the Operation of the Battery Disconnect System. {1411}
2009/08/03
New Pressure Switch Is Now Used For Air Conditioner Refrigerant On Certain Cat Products {1435, 1809}
2011/07/18
An Improved 5P-8500 Key Is Now Available {1416, 1416, 7000, 7000}
2011/12/01
Truck Engine News
Coolant/Battery Tester Group Quickly Tests Coolant and Battery Acid {0773, 0785}
2004/12/27
Do Not Use the 261-3363 Wireless Communication Adapter with Model Year 2007 Cat Engines and Transmissions in On-Highway Trucks {0785, 1930, 7620}
2007/10/01
New Software Flash File Extension Requires Caterpillar Electronic Technician (Cat ET) 2013B {0785, 1900, 1901}
2014/04/04
Engine News
Caterpillar Electronic Technician (Cat ET) 2001B-Service Pack 1 Software Upgrade is Now Available {0785}
2002/02/01
2002A Service Pack 1 for Caterpillar Electronic Technician (Cat ET) is now available {0785}
2002/08/01
The 237-5130 Digital Multimeter Gp Features a Built-in Infrared Thermometer {0785}
2004/04/19
Coolant/Battery Tester Group Quickly Tests Coolant and Battery Acid {0773, 0785}
2004/12/27
260-5800 Electrical Test Group Packages Digital Multimeter, Clamp-on Ammeter, Current Detector, and Test Leads in Convenient Carrying Case {0785}
2005/03/07
270-5051 Repair Kit (Electrical Connectors) Available for Repairs to Wiring Harnesses with Ampseal 16 and A4E 2 Connectors {0709, 1408}
2006/03/20
Enhanced Voltmeter Leads Are Now Available {0785}
2006/02/13
Test Cable Group Checks Three-Wire, Active Analog Circuits That Are Used in Sensors {0779, 0785}
2006/10/16
277-4734 Bypass Harness Assembly Allows Cat Electronic Technician (Cat ET) to Communicate with ADEM IV:E2 Electronic Control Modules {0779, 0785, 1901, 1930}
2006/09/04
New Software Flash File Extension Requires Caterpillar Electronic Technician (Cat ET) 2013B {0785, 1900, 1901}
2014/03/28
Special Instruction
Using The 6V4060 Engine Set Point Indicator Group{0781}
Using The 6V4060 Engine Set Point Indicator Group{0781}
Use of 8T5200 Signal Generator/Counter Group{0778, 0783, 0785}
Use of 8T5200 Signal Generator/Counter Group{0778, 0783, 0785}
Use of the 4C6534 Speed Switch Calibration Harness{0781, 0785}
Use of the 4C6534 Speed Switch Calibration Harness{0781, 0785}
An Aid To Reading Multimeter Scales{0785}
An Aid To Reading Multimeter Scales{0785}
Tool Operating Manual
348-5430 Multi-Tool Gp 2 {0709, 0769, 0785}
348-5430 Multi-Tool Gp 2 {0709, 0769, 0785}
NEHS1032: 538-5051 Communications Adapter 3 {0599, 0709, 1900, 4800, 7490, 7600}
NEHS1032: 538-5051 Communications Adapter 3 {0599, 0709, 1900, 4800, 7490, 7600}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the Communications Adapter 3{1900}
Using the Communications Adapter 3{1900}
Using the 8T-2700 Blowby/Air Flow Indicator{0781, 0785, 1317}
Using the 8T-2700 Blowby/Air Flow Indicator{0781, 0785, 1317}
146-4080 Digital Multimeter Specification, Testing, and Maintenance Manual{0374, 0599, 0709}
146-4080 Digital Multimeter Specification, Testing, and Maintenance Manual{0374, 0599, 0709}
Communication Adapter II{0600, 0709, 7600, 7610}
Communication Adapter II{0600, 0709, 7600, 7610}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
131-5051 Dataview Group and Dataview Portable Tech Station Group{0374, 0599, 0701, 0709}
131-5051 Dataview Group and Dataview Portable Tech Station Group{0374, 0599, 0701, 0709}
Using the 4C-8195 Control Service Tool{0374, 0599, 0709, 7490}
Using the 4C-8195 Control Service Tool{0374, 0599, 0709, 7490}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
NEHS1270 TesLite and LoadProCables {0374, 0599, 0709, 0734}
NEHS1270 TesLite and LoadProCables {0374, 0599, 0709, 0734}
M0090131 Battery Analyzer 480-4181 (484-4859 Group) {0374, 0599, 0709, 1401, 7468}
M0090131 Battery Analyzer 480-4181 (484-4859 Group) {0374, 0599, 0709, 1401, 7468}
Reuse And Salvage Guidelines
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Testing and Adjusting
Service Tools
308B, 311B, 312B, 315B, 317B, 318B, 320B, 322B, 325B, 330B, M325B and W330B Excavators Engine and Pump Control
Troubleshooting
Service Tools
Alternator - Delco 21SI
Service Tools
37-MT, 41-MT, and 42-MT Series Starting Motors
Service Tools
Alternator - Delco 27SI
Service Tools
Starting Motor - Delco 50-MT
Service Tools
Product Link - PL522/523
Service Tools
Product Link 121S/300
Service Magazine
New Address For Repair Of Diagnostic Tools{0650}
1982/06/14
6V6124 Calibration Coil Available To Calibrate And Check 6V4910 AC/DC Clamp-On Ammeter{0651}
1982/06/28
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator{0651}
1982/08/16
Use Caterpillar 6V50 Engine Timing Indicator For Accurate Readings{0782,0785,0775}
1985/05/27
Two, New Top Dead Center Magnetic Transducers Available{0651,0653,1214,1250}
1985/10/07
5P957 And 5P3514 Coolant And Battery Tester{0786,1395,1401}
1987/03/23
Two New Self-Powered Digital Tachometers And Signal Generator Available {7462}
1987/05/11
Revised Instructions For Installation of New Maintenance Free Batteries{1401,1400}
1988/12/12
Use 136-7205 Extension Cable For Monitors{0740,0779}
1998/03/09
Diagnostic Cables and Harnesses Are Available {0785}
2000/12/25
Caterpillar Electronic Technician (Cat ET) 2001B-Service Pack 1 Software Upgrade is Now Available {0785}
2002/02/11
New Service Information Tool for CAT Dealers is Now Available {1900}
2002/06/17
2002A Service Pack 1 for Caterpillar Electronic Technician (Cat ET) is Now Available {0785}
2002/08/19
USB Cable Connects PC with USB Ports to Communication Adapter or to DataView Tool Group {0785, 0788}
2004/03/15
Coolant/Battery Tester Group Quickly Tests Coolant and Battery Acid {0773, 0785}
2004/12/27
260-5800 Electrical Test Group Packages Digital Multimeter, Clamp-on Ammeter, Current Detector, and Test Leads in Convenient Carrying Case {0785}
2005/03/07
The 285-0910 Multi-Tool Gp Incorporates Four Diagnostic Tools into a Single, Hand Held Unit {0774, 0779, 0781, 0782}
2006/11/27
New 271-8590 Analyzer Gp (24-Volt) Quickly Identifies Starting and Charging System Problems {0709, 1406}
2006/10/01
277-2362 Transmission Analyzer III Group Offers Upgraded Diagnostic Capabilities {0769, 0779, 0783}
2007/10/22
Updated Instruction For The Bypass Harness {0785, 1408}
2008/03/17
New Firmware Is Now Available for Communications Adapter 3 {7610, 7620}
2011/10/20
New Software Flash File Extension Requires Caterpillar Electronic Technician (Cat ET) 2013B {0785, 7620}
2013/07/25
New Software For Cat<SUP>&reg;</SUP> ET Can Now Be Used For All Caterpillar Products {0785, 7606}
2013/08/15
A New Communication Adapter Cable As Is Now Available For Certain Cat Products {0785}
2014/11/10
Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}
Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}
Military Electronic Technician (Military ET) Is Now Available For Military Personnel {0374, 0376, 0599, 1000, 7000, 7610, 7620}
Military Electronic Technician (Military ET) Is Now Available For Military Personnel {0374, 0376, 0599, 1000, 7000, 7610, 7620}
Systems Operation
Solenoid Valves
308B, 311B, 312B, 315B, 317B, 318B, 320B, 322B, 325B, 330B, M325B and W330B Excavators Engine and Pump Control
Testing and Adjusting
Check Overcurrent at Proportional Reducing Valve - Troubleshoot - 4102
308B, 311B, 312B, 315B, 317B, 318B, 320B, 322B, 325B, 330B, M325B and W330B Excavators Engine and Pump Control
Check Open Circuit at Proportional Reducing Valve - Troubleshoot - 4103
308B, 311B, 312B, 315B, 317B, 318B, 320B, 322B, 325B, 330B, M325B and W330B Excavators Engine and Pump Control
Check Short Circuit of Proportional Reducing Valve to Battery Voltage - Troubleshoot
308B, 311B, 312B, 315B, 317B, 318B, 320B, 322B, 325B, 330B, M325B and W330B Excavators Engine and Pump Control
Proportional Reducing Valve Sweep - Test
308B, 311B, 312B, 315B, 317B, 318B, 320B, 322B, 325B, 330B, M325B and W330B Excavators Engine and Pump Control
Proportional Reducing Valve - Calibrate
308B, 311B, 312B, 315B, 317B, 318B, 320B, 322B, 325B, 330B, M325B and W330B Excavators Engine and Pump Control
Disassembly and Assembly
Solenoid Valves
330B, 330B L & 330B LN EXCAVATORS MACHINE SYSTEMS
Service Magazine
Quieter Solenoid Valve For Swing Parking Brake {5479,5483}
1997/12/01
Special Instruction
Installation of 244-1090 Alarm Gp {7400, 7402, 7407}
Installation of 244-1090 Alarm Gp {7400, 7402, 7407}
Service Magazine
Wiring Harness Conduit Component Sizes {1408}
1995/02/13
Engine News
Correction to The Pocket Guide, SEBD0402 Is Available as a Reference for Routing and Installing Wire Harness Assemblies {1408}
2000/07/01
270-5051 Repair Kit (Electrical Connectors) Available for Repairs to Wiring Harnesses with Ampseal 16 and A4E 2 Connectors {0709, 1408}
2006/03/20
Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2010/05/13
Operation and Maintenance Manual
Battery - Recycle
330B L and 330B LN Excavators
Battery, Battery Cable or Battery Disconnect Switch - Replace
330B L and 330B LN Excavators
Power Receptacle
330B L and 330B LN Excavators
Service Hour Meter
330B L and 330B LN Excavators
Lighter
330B L and 330B LN Excavators
Seat Heater - If Equipped
330B L and 330B LN Excavators
Battery Electrolyte Level for Low Maintenance Battery - Check
330B L and 330B LN Excavators
Fuses - Replace
330B L and 330B LN Excavators
Window (Power) - If Equipped
330B L and 330B LN Excavators
Quick Coupler Control
320B, 322B, 325B, 330B and 345B Excavators
SmartBoom Control - If Equipped
320B, 322B, 325B, 330B and 345B Excavators
SmartBoom Operation - If Equipped
320B, 322B, 325B, 330B and 345B Excavators
Special Instruction
Use of the 4C6534 Speed Switch Calibration Harness{0781, 0785}
Use of the 4C6534 Speed Switch Calibration Harness{0781, 0785}
Retrofit Installation of Coolant Loss Sensor{1353, 1395, 7422, 7470}
Retrofit Installation of Coolant Loss Sensor{1353, 1395, 7422, 7470}
Battery Ratings And Cross Reference Chart{1401}
Battery Ratings And Cross Reference Chart{1401}
Installation Procedure for 180-8007 Heat and Air Conditioner Control Group on Certain Excavators{1408, 7304, 7320}
Installation Procedure for 180-8007 Heat and Air Conditioner Control Group on Certain Excavators{1408, 7304, 7320}
Modify Wiring in order to Allow Activation of the Medium Pressure Circuit When the Auxiliary Hydraulic Circuit is in the One-Way Mode{5734}
Modify Wiring in order to Allow Activation of the Medium Pressure Circuit When the Auxiliary Hydraulic Circuit is in the One-Way Mode{5734}
Installation of 183-9371 Coupler Lines Gp (KIT, WEDGE LOCK){1408, 5000, 5051, 5057, 6129, 7000, 7332}
Installation of 183-9371 Coupler Lines Gp (KIT, WEDGE LOCK){1408, 5000, 5051, 5057, 6129, 7000, 7332}
Cross-Reference for Electrical Connectors {7553}
Cross-Reference for Electrical Connectors {7553}
Procedure to Install 169-9513 Hydraulic Kit on Certain Excavators{1408, 5057, 5479, 6129}
Procedure to Install 169-9513 Hydraulic Kit on Certain Excavators{1408, 5057, 5479, 6129}
Circuit Breaker Harness Assembly {1420}
Circuit Breaker Harness Assembly {1420}
Ampseal 16 Connector Peripheral Seal Servicing{7553}
Ampseal 16 Connector Peripheral Seal Servicing{7553}
Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}
Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}
Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}
Repair Procedure for Damaged Harness Wiring {1408}
Repair Procedure for Damaged Harness Wiring {1408}
Installation Procedure for Product Link PL421 Retrofit{7606}
Installation Procedure for Product Link PL421 Retrofit{7606}
Installation of Seat Belt Reminder Systems {1408, 1901, 1902, 7327, 7602, 7606, 7610, 7620}
Installation of Seat Belt Reminder Systems {1408, 1901, 1902, 7327, 7602, 7606, 7610, 7620}
DRCP Connector Repair Service Instruction {1408, 7553}
DRCP Connector Repair Service Instruction {1408, 7553}
Procedure to Properly Tighten the Nuts on the Solenoid Studs on Electronic Unit Injectors (EUI){1290, 1408, 1900}
Procedure to Properly Tighten the Nuts on the Solenoid Studs on Electronic Unit Injectors (EUI){1290, 1408, 1900}
Service Letter-NACD
PRODUCT SUPPORT PROGRAM FOR REPLACING THE RADIO CONVERTER ON VARIOUS EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE RADIO CONVERTER ON VARIOUS EXCAVATORS
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Technical Information Bulletin
Refrigerant Compressors May Fail
Refrigerant Compressors May Fail
Auxiliary Control Pedal (4th) Is Still Active Even Though Backup Switch Is Activated In Manual Backup Mode
Auxiliary Control Pedal (4th) Is Still Active Even Though Backup Switch Is Activated In Manual Backup Mode
Check For Correct Operation Of Oil Level Switch
Check For Correct Operation Of Oil Level Switch
Backup Switch For The Auxiliary Controller May Be Wired Incorrectly
Backup Switch For The Auxiliary Controller May Be Wired Incorrectly
Specifications
Wiring (Combined Function Hydraulic)
330B Excavator Machine System Specifications
Wiring (One Way)
330B Excavator Machine System Specifications
Wiring (Refueling Pump)
330B Excavator Machine System Specifications
Tool Operating Manual
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Service Letter-China
PRODUCT SUPPORT PROGRAM FOR REPLACING THE RADIO CONVERTER ON VARIOUS EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE RADIO CONVERTER ON VARIOUS EXCAVATORS
Service Letter-Asia
Systems Operation
Switches
308B, 311B, 312B, 315B, 317B, 318B, 320B, 322B, 325B, 330B, M325B and W330B Excavators Engine and Pump Control
Sensors
308B, 311B, 312B, 315B, 317B, 318B, 320B, 322B, 325B, 330B, M325B and W330B Excavators Engine and Pump Control
Senders
308B, 311B, 312B, 315B, 317B, 318B, 320B, 322B, 325B, 330B, M325B and W330B Excavators Engine and Pump Control
Pressure Switch (Refrigerant)
Air Conditioning and Heating R134a for All Caterpillar Machines
Reuse And Salvage Guidelines
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Service Letter-APD
PRODUCT SUPPORT PROGRAM FOR REPLACING THE RADIO CONVERTER ON VARIOUS EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE RADIO CONVERTER ON VARIOUS EXCAVATORS
Testing and Adjusting
Electric Starting System - Test
3306C Engines for Caterpillar Built Machines
Check of Speed Sensor - Troubleshoot - 4201 And 4302
308B, 311B, 312B, 315B, 317B, 318B, 320B, 322B, 325B, 330B, M325B and W330B Excavators Engine and Pump Control
Engine Speed Dial Does Not Work - Troubleshoot - 420E And 2303
308B, 311B, 312B, 315B, 317B, 318B, 320B, 322B, 325B, 330B, M325B and W330B Excavators Engine and Pump Control
Low Idle Switch Does Not Work - Troubleshoot
308B, 311B, 312B, 315B, 317B, 318B, 320B, 322B, 325B, 330B, M325B and W330B Excavators Engine and Pump Control
Electrical Components And Connector Locations
308B, 311B, 312B, 315B, 317B, 318B, 320B, 322B, 325B, 330B, M325B and W330B Excavators Engine and Pump Control
Controller Connector Contact Identification
308B, 311B, 312B, 315B, 317B, 318B, 320B, 322B, 325B, 330B, M325B and W330B Excavators Engine and Pump Control
Engine Speed Dial Setting - Check
308B, 311B, 312B, 315B, 317B, 318B, 320B, 322B, 325B, 330B, M325B and W330B Excavators Engine and Pump Control
System Schematic
308B, 311B, 312B, 315B, 317B, 318B, 320B, 322B, 325B, 330B, M325B and W330B Excavators Engine and Pump Control
Harness and Wire Identification
308B, 311B, 312B, 315B, 317B, 318B, 320B, 322B, 325B, 330B, M325B and W330B Excavators Engine and Pump Control
Speed Sensor - Replace
308B, 311B, 312B, 315B, 317B, 318B, 320B, 322B, 325B, 330B, M325B and W330B Excavators Engine and Pump Control
Controller - Replace
320B, 322B, 325B, 330B, 345B and 345B Series II Excavators Auxiliary Hydraulic System
Electrical Connector - Inspect
320B, 322B, 325B, 330B, 345B and 345B Series II Excavators Auxiliary Hydraulic System
Electrical Connector - Inspect
Product Link - PL522/523
Wiring Harness (Open Circuit) - Test
Product Link - PL522/523
Wiring Harness (Short Circuit) - Test
Product Link - PL522/523
Electrical Connector - Inspect
Product Link 121S/300
Wiring Harness (Open Circuit) - Test
Product Link 121S/300
Wiring Harness (Short Circuit) - Test
Product Link 121S/300
Troubleshooting
MID 122 - CID 0269 - FMI 03
Product Link 121S/300
MID 122 - CID 0269 - FMI 04
Product Link 121S/300
Service Magazine
Use FT1711 Light Table For Cylinder Liner Inspection {0652,1216}
1982/11/29
Maintenance Free Batteries{1401}
1986/03/10
New Oil Pressure Switch Used With EMS Systems{7485}
1986/03/10
Requirements For Shipping Wet Batteries In The U.S.{1401,7500}
1986/04/07
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Heavy-Duty Line Of Batteries Available To U.S. Dealers{1400,1401}
1986/09/01
Safety Vent Caps For Caterpillar Batteries{1401}
1977/07/11
5P957 And 5P3514 Coolant And Battery Tester{0786,1395,1401}
1987/03/23
Alternator &quot;R&quot; Terminal Wire Assembly Available For Wiring Harness Repair{1408}
1987/05/04
Alternator/Generator Output Test On The Engine{1401,1404,1405,1406}
1987/05/04
Testing The Starter On The Engine{1401,1450}
1987/05/04
Be Sure Battery Cable-To-Starter Connection Has Correct Torque{1453}
1988/03/14
Maintenance-Free Batteries Require Different Troubleshooting Procedures{1401}
1988/06/20
Revised Instructions For Installation of New Maintenance Free Batteries{1401,1400}
1988/12/12
Fuse And Wire Assembly Is Available For Protection Of Earlier 6N5906 Service Meters{7480}
1979/01/29
Shorter Mounting Bolts Used For Glow Plug Wiring{1403,1412}
1979/05/21
Voltage Regulator Can Cause Variable Ammeter Indications{1410,1401,1405,1406,7467}
1979/10/22
Two Plug Assemblies (Booster Cables) Are Available To Start Machines{1401,1453}
1979/11/05
Batteries Can Be Damaged If Too Much Vacuum Is Used During Electrolyte Fill{1401}
1979/11/26
High Performance Maintenance Free Battery Available{1401}
1989/01/16
Limitations On Engine Cranking Time{1453,1401}
1989/03/27
How To Troubleshoot A Short-To-Ground In Power Wiring{1400}
1989/03/27
Preventive Maintenance For Batteries{1401}
1989/03/27
Causes And Effects Of Low Battery Voltage On Electric Starters{1401,1453,1467}
1989/04/24
Procedure For Replacing Batteries Or Battery Cables {1401,1402,1411}
1989/05/01
Procedure For Replacing Batteries, Battery Cables Or Disconnect Switches {1401,1402,1411}
1989/05/01
Procedure For Replacing Batteries, Battery Cables Or Disconnect Switches {1401,1402,1411}
1989/05/01
Special Instruction, &quot;Battery Charging Rate And Time Tables,&quot; Available On Oil Resistant Paper{0374,1401}
1989/06/19
Fitting Needed To Install New Oil Pressure Switch When Replacing Former Switches{7485}
1991/11/25
Wiring Harness Conduit Component Sizes {1408}
1995/02/13
Parts Manuals May List Air Conditioning Compressors Incorrectly {1802,1809,7320}
1996/10/07
Ground Cables In The Battery And Wiring Circuit Now Have Full Contact To Ground {7050,1408,7253}
1998/08/24
New Switch Assembly In The Oil Pan Group Is More Accurate {1302,7422}
1998/08/24
New Switch Assembly in Breaker Panel Groups Improves Reliability of Main Power Relay {1417,1423}
1999/06/28
New Test Procedure For Testing Air Conditioning Electrical Components {4466,1435}
1999/11/29
Special Instruction, REHS0557 is Available for Modifying the Wiring on the Left Hand Joystick to Directly Control the Medium Pressure Circuit {5734}
1999/12/13
Special Instruction, REHS0440 is Available for an Index of Electrical System Schematics {7566}
2000/04/10
Correction to The Pocket Guide, SEBD0402, Is Available as a Reference for Routing and Installing Wire Harness Assemblies {1408}
2000/10/23
Harness Repair of Alternator R-Terminal Connector {1405, 1408, 7553}
2000/10/02
Dielectric Grease Should Not Be Used in Electrical Connectors {1408, 7553}
2012/05/04
The Main Power Relay Has Improved Sealing {1423}
2009/05/18
An Improved Expansion Tank Assembly Is Now Used {1353, 1374, 1408}
2004/12/20
Service of the Machined Terminals and the Stamped and Formed Terminals {7553}
2006/11/13
Troubleshooting the Rotary Switch Assembly for the Engine Speed {1408, 7332}
2008/08/18
Updated Instruction For The Bypass Harness {0785, 1408}
2008/03/17
New Software and a New Rotary Switch Improve the Reliability of the Engine Speed Dial on Excavators {1408, 7332, 7610, 7620}
2009/04/13
Improvements to the Fuel Sender Group {1273, 1408, 6201, 7481, 7857}
2011/03/22
Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2010/05/12
Striped Wire Is Replaced With Improved Ink Jet Identification for Legacy (Parts Service) Wire harnesses {1408}
2012/06/08
Use Conductive Fasteners for Electrical Grounding on All Cat Products {7553, 7556}
2012/05/08
Information On Battery Cables and Wire Assemblies for Assembling at Dealer Site {4459}
2012/09/21
Parts are Now Available to Make Jump Start Receptacle on Cat<SUP>&reg;</SUP> Product {1463}
2014/03/04
Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}
Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}
Tool Operating Manual
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Service Magazine
Use Conductive Fasteners for Electrical Grounding on All Cat Products {7553}
Use Conductive Fasteners for Electrical Grounding on All Cat Products {7553}

Truck sale:

Caterpillar 330BL, Construction
On Request 
Caterpillar 330BL, Construction
- Crawler Excavators
WILLIAM ADAMS PTY. LTD.
Australia
Caterpillar 330BL, Construction
21,751 
Caterpillar 330BL, Construction
- Petroleum Engines
FINNING CANADA
Canada
Caterpillar 330BL, Construction
44,000 
Caterpillar 330BL, Construction
- Crawler Excavators
QUINN COMPANY
Caterpillar 330BL, Construction
45,000 
Caterpillar 330BL, Construction
- Crawler Excavators
MACALLISTER MACHINERY CO., INC
Caterpillar 330BL, Construction
43,000 
Caterpillar 330BL, Construction
- Crawler Excavators
H.O. PENN MACHINERY CO., INC.
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.