AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

1006179 GOVERNOR GP-UNIT INJECTOR Type 2 Part Of 4P7771 Governor Unit Injector RT100 TELEHANDLER


FUEL SYSTEM
GOVERNOR GP
CONTROL GP-FUEL INJECTION
LINES GP-FUEL
GOVERNOR GP
FILTER GP-FUEL
GOVERNOR GP
OPERATOR STATION
MONITOR GP
ELECTRICAL AND STARTING SYSTEM
ALTERNATOR GP-CHARGING

TELEHANDLER RT100 TELEHANDLER 1GJ
 RT80, RT100 TELESCOPIC MATERIAL HANDLER 1GJ00001-01207 (MACHINE) POWERED BY 3114T ENGINE SEBN8601 RT100 1GJ   (1990)

FUEL SYSTEM

GOVERNOR GP
GOVERNOR GP-UNIT INJECTOR
4P-5503 GOVERNOR GP-UNIT INJECTOR
GOVERNOR GP-UNIT INJECTOR
100-6179 GOVERNOR GP-UNIT INJECTOR
GOVERNOR GP-UNIT INJECTOR
100-6179 GOVERNOR GP-UNIT INJECTOR
DRIVE GP-GOV & TRANSFER PUMP
4P-4775 DRIVE GP-GOV & TRANSFER PUMP
DRIVE GP-GOV & TRANSFER PUMP
7E-8794 DRIVE GP-GOV & TRANSFER PUMP
LINES GP-GOVERNOR OIL
7W-8434 LINES GP-GOVERNOR OIL
 

#SEBN86010080
 

100-6179: GOVERNOR GP-UNIT INJECTOR

1006179 GOVERNOR GP-UNIT INJECTOR
Type 2
Part Of 4P7771 Governor Unit Injector
c630535 SEBN8601
1006179 GOVERNOR GP-UNIT INJECTOR Parts scheme
  For full view, you need register

Parts for your RT100 TELEHANDLER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-1460 [1] RING-RETAINING  
2. 108-1612 [1] CLEVIS  
3. 6D-9953 [1] PIN-SPRING  
4. 7C-8854 [1] PIN-CLEVIS  
5. 115-2553 [1] VALVE-GOVERNOR SERVO  
6. 8C-3312 [1] RING-RETAINING  
7. 7W-7364 [1] SLEEVE-GOVERNOR SERVO  
8. 5P-9757 [1] SEAL-O-RING  
9. 108-1613 [1] PISTON-SERVO  
10. 125-8158 [1] SLEEVE-RACK CONTROL  
11. 9Y-1837 [1] SPRING  
12. 8T-7069 [1] RING-RETAINING  
13. 117-9098 [1] SLEEVE-LIMITING  
14. 7N-2171 [1] RING-RETAINING  
15. 114-1803 C [1] LEVER AS  
16. Z [1] PIN  
17. Z [2] SWIVEL  
18. Z [1] LEVER  
19. 7W-5594 [1] SHAFT AS-PIVOT  
20. Z [1] PIN  
21. 7C-5480 [1] SPRING-TORSION  
22. 7C-8640 [1] SPRING-CAM  
23. 123-6433 [1] ARBOR AS-TORQUE CAM  
24. 8T-8895 M [1] SETSCREW-SOCKET  
25. 7E-3216 [1] BLOCK AS-BEARING  
26. 6F-5933 [2] BEARING-NEEDLE  
27. 7E-3217 [1] LEVER AS  
28. Z [1] SWIVEL  
29. 8C-8546 M [9] BOLT-SOCKET HEAD  
30. 3P-3547 [1] RING-RETAINING  
31. 4P-5743 [1] LEVER AS-LIMIT  
32. Z [1] PIN  
33. Z [1] LEVER-TORQUE  
34. 7C-6205 [1] PLUG  
35. 6V-8189 [1] NUT  
36. 115-1192 [1] SEAL-GOVERNOR HOUSING  
37. 3T-0849 M [6] BOLT-SOCKET HEAD  
38. 7W-4313 [1] WASHER  
39. 6I-4514 [1] HOUSING AS  
40. Z [1] SHAFT  
41. Z [1] PLUG  
42. 8T-6702 M [1] SETSCREW-SOCKET  
43. 5C-2874 M [2] NUT  
44. 7C-6204 [1] PLUG  
45. 7L-3386 [1] SEAL-O-RING  
46. 7C-5884 [1] COVER-OIL SUMP  
47. 6V-5213 M [3] BOLT-SOCKET HEAD  
48. 4P-3539 [1] LEVER-THROTTLE  
49. 8T-5435 M [1] BOLT  
50. 1N-3887 C [1] SETSCREW-SOCKET  
51. 7C-4483 [1] SCREEN AS  
52. 6V-5100 [1] SEAL-O-RING  
53. 4P-4231 [1] COVER-REAR  
54. Z [1] PLUG  
55. 4P-3537 [1] RING-TOLERANCE  
56. 8T-0269 M [3] BOLT-SOCKET HEAD  
57. 7E-8794 Y [1] DRIVE GP-GOV & TRANSFER PUMP  
58. 7C-5150 [1] PIN  
59. 4P-0737 [1] SHAFT-RISER  
60. 7C-5148 [1] CARRIER-FLYWEIGHT  
61. 9X-2547 M [2] SCREW-FLAT HEAD  
62. 2S-7316 [2] DOWEL  
63. 6V-7699 [4] WASHER-HARD  
64. 8C-8545 M [4] BOLT-SOCKET HEAD  
65. 7C-5541 [2] TOE-FLYWEIGHT  
66. 7W-8993 [2] WEIGHT  
67. 8C-5061 [1] RING-RETAINING  
68. 7C-2743 [2] RACE  
69. 7W-5561 [1] BEARING-THRUST  
70. 7W-1440 B [8] SHIM  
71. 4P-8947 [1] RISER  
72. 4P-8948 [1] SEAT AS-SPRING  
73. [1] INSERT  
74. 7C-3776 [1] PISTON AS  
75. 4N-6407 [1] SPOOL-DASHPOT  
76. 4N-6406 [1] RING-SPACER  
77. 4N-6404 [1] RING-RETAINING  
78. 7W-5591 [1] SEAT-GOVERNOR SPRING  
79. 7C-5883 B [7] SHIM  
80. 7C-5885 [1] WASHER  
81. 4P-4000 [1] SPRING-LEVER  
  B   USE AS REQUIRED
  Y   SEPARATE ILLUSTRATION
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Z   NOT SERVICED SEPARATELY
 

#SEBN86010081
 

4P-4775: DRIVE GP-GOV & TRANSFER PUMP

4p4775 DRIVE GP-GOVERNOR & TRANSFER PUMP
Flexible Drive
Part Of 4P4778 Governor-Unit Injector
c499104 SEBN8601
4P4775 DRIVE GP-GOV & TRANSFER PUMP Parts scheme
  For full view, you need register

Parts for your RT100 TELEHANDLER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6L-8598 [1] RING-RETAINING  
2. 7W-9526 [1] SPRING-TORSION  
3. 7W-5568 [1] SHAFT AS-THROTTLE  
4. 6V-5213 M [2] BOLT-SOCKET HEAD  
5. 7C-5593 [1] SPRING-THROTTLE BIAS  
6. 4D-9986 [2] SEAL-O-RING  
7. 4P-3953 [1] PISTON AS  
8. 7E-0156 [1] FITTING-INLET  
9. 7W-5621 [1] COVER-TRANSFER PUMP  
10. 7C-5294 [1] SPRING  
11. 8C-6364 M [3] BOLT-SOCKET HEAD  
12. 7W-7381 [1] FITTING-OUTLET  
13. 3J-1907 [2] SEAL-O-RING  
14. 7W-7383 [2] VALVE AS-CHECK  
15. 7W-5571 [1] LEVER-CONTROL  
16. 8T-7050 M [1] SETSCREW-SOCKET  
17. 4P-0665 [1] HOUSING AS-DRIVE  
18. 7S-6798 [1] SEAL-LIP TYPE  
19. 7S-5005 [2] DOWEL  
20. 2K-5830 [2] BEARING-NEEDLE  
21. 9Y-0208 [1] BUSHING  
22. 9Y-3107 M [1] BOLT  
23. 7X-4805 [6] SEAL-O-RING  
24. 7W-9638 [1] SHAFT AS-SHUT-OFF  
25. 7W-4328 [1] SPRING-SHUT-OFF  
26. 7W-9402 [1] LEVER-SHUT-OFF  
27. 7W-9403 [1] LEVER-SHUT-OFF  
28. 8C-5899 [1] PIN-SPRING  
29. 8T-5433 M [4] BOLT-SOCKET HEAD  
30. 7W-5615 [1] SLEEVE AS-PUMP  
  M   METRIC PART
 

#SEBN86010082
 

7E-8794: DRIVE GP-GOV & TRANSFER PUMP

7E8794 DRIVE GP-GOVERNOR & TRANSFER PUMP
Part Of 4P5503 & 1006179 Governors-Unit Injector
c572096 SEBN8601
7E8794 DRIVE GP-GOV & TRANSFER PUMP Parts scheme
  For full view, you need register

Parts for your RT100 TELEHANDLER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4P-5612 [1] HOUSING AS-FRONT  
  7S-5005 [2] DOWEL  
  7S-6798 [1] SEAL-LIP TYPE  
  9Y-3107 M [1] BOLT  
2. [1] SPRING-TORSION  
3. 4P-9490 [1] SHAFT AS-SHUT-OFF  
  4P-9489 [1] SHAFT-SHUT OFF  
  4P-9491 [1] SHIM-SHUT OFF  
  4P-9492 [1] BRACKET-SHAFT  
  4P-9493 [1] LEVER-SHUT OFF  
  4P-9494 [1] SPRING-SHUT OFF  
  105-0585 [1] LEVER-SHUT-OFF  
  9X-8902 M [4] BOLT-SOCKET HEAD  
4. 6V-5213 M [2] BOLT-SOCKET HEAD  
5. 7W-5615 [1] SLEEVE AS-PUMP  
  1W-0565 [1] RING-RETAINING  
6. 4D-9986 [2] SEAL-O-RING  
7. 4P-3953 [1] PISTON AS  
8. 7E-0156 [1] FITTING-INLET  
9. 4P-4224 [1] COVER-TRANSFER PUMP  
10. 7C-5294 [1] SPRING  
11. 8C-6364 M [3] BOLT-SOCKET HEAD  
12. 7E-9898 [1] CONNECTOR-ORIFICE  
13. 3J-1907 [2] SEAL-O-RING  
14. 7W-7383 [2] VALVE AS-CHECK  
15. 7E-3943 [1] LEVER-CONTROL  
16. 9Y-9846 M [1] SCREW-LOCATING  
17. 6L-8598 [2] RING-RETAINING  
18. 4P-3538 [1] SHAFT-THROTTLE  
19. 7E-3944 [1] SLEEVE  
  M   METRIC PART
 

#SEBN86010083
 

7W-8600: CONTROL GP-FUEL INJECTION

7W8600 CONTROL GP-FUEL INJECTION
Part of 7C5477 Engine Arrangement
c550822 SEBN8601
7W8600 CONTROL GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your RT100 TELEHANDLER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4P-9048 [1] CONTROL AS-FUEL  
2. 6V-5683 M [3] BOLT  
  M   METRIC PART
 

#SEBN86010084
 

7W-9854: LINES GP-FUEL FILTER

7W9854 LINES GP-FUEL FILTER
Part of 7C5477 Engine Arrangement
c587220 SEBN8601
7W9854 LINES GP-FUEL FILTER Parts scheme
  For full view, you need register

Parts for your RT100 TELEHANDLER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-7934 [2] WASHER-HARD  
2. 6V-6317 M [2] BOLT (M10X1.50X20MM)  
3. 6V-8724 [2] ELBOW (90 DEGREE-9/16-18 THD)  
4. 3J-1907 C [5] SEAL-O-RING (15.85MM OD)  
    (11.89MM ID)
5. 9S-4191 [1] PLUG-O-RING (9/16-18 THD)  
6. 6V-8397 [4] SEAL-O-RING (12.83MM OD)  
    (9.25MM ID)
7. 115-4232 [1] TUBE AS  
8. 7W-7693 [1] TUBE AS  
9. 3N-3252 [1] SPRING  
10. 5P-7813 [1] SEAL-O-RING  
11. 8T-0151 [1] ADAPTER  
12. 7E-5189 [1] VALVE-REGULATOR  
13. 7E-5190 [1] TUBE AS  
14. 5F-7054 [1] SEAL-O-RING (18.6MM ID)  
15. 8T-7547 MC [2] BOLT (M8X1.25X30MM)  
16. 7X-2459 [1] TEE  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
 

#SEBN86010085
 

7W-8434: LINES GP-GOVERNOR OIL

7W8434 LINES GP-GOVERNOR OIL
Part Of 4P5790 Governor-Unit Injector
Part of 7C5477 Engine Arrangement
c494156 SEBN8601
7W8434 LINES GP-GOVERNOR OIL Parts scheme
  For full view, you need register

Parts for your RT100 TELEHANDLER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6V-8628 [1] ELBOW  
2. 3J-7354 [2] SEAL-O-RING (8.92MM ID)  
3. 6V-8647 [1] CONNECTOR-SEAL  
4. 7W-0367 [1] TUBE AS  
5. 4J-5477 [2] SEAL-O-RING (8.61MM ID)  
 

#SEBN86010086
 

1N-3476: FILTER GP-FUEL

1N3476 FILTER GP-FUEL
Part of 7C5477 Engine Arrangement
c549249 SEBN8601
1N3476 FILTER GP-FUEL Parts scheme
  For full view, you need register

Parts for your RT100 TELEHANDLER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9M-1974 B [4] WASHER-HARD (2MM THK)  
2. 6V-9607 MB [2] BOLT (M8X1.25X120MM)  
3. 3J-1907 [1] SEAL-O-RING (15.85MM OD)  
4. 7C-1159 [1] GASKET  
5. 6V-5218 M [2] BOLT (M8X1.25X35MM)  
6. 1R-0750 [1] FILTER AS-FUEL  
7. 9S-4191 [1] PLUG-O-RING (9/16-18 THD)  
8. 4W-5158 [1] BASE AS  
9. 4N-3294 [1] INSERT-FUEL FILTER  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBN86010087
 

7W-4812: FASTENER GP-GOVERNOR

7W4812 FASTENER GP-GOVERNOR
Part Of 4P5790 Governor-Unit Injector
Part of 7C5477 Engine Arrangement
c476378 SEBN8601
7W4812 FASTENER GP-GOVERNOR Parts scheme
  For full view, you need register

Parts for your RT100 TELEHANDLER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7W-3872 JC [1] SLEEVE  
2. 9M-1974 [3] WASHER  
3. 6V-5218 M [3] BOLT  
4. 9Y-5295 C [1] TUBE-GOVERNOR CONNECTION  
5. 6F-6673 [1] SEAL-O-RING  
6. 7C-3839 [1] CLIP-SPRING  
7. 7E-0844 [1] SEAL  
8. 1T-1068 [1] SEAL-O-RING  
   
    J-INSTALL SLEEVE
    IN FRONT HOUSING
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
 

#SEBN86010088
 

7E-9408: INSTRUMENT GP

7E9408 INSTRUMENT GP
Part of 7C5477 Engine Arrangement
c498200 SEBN8601
7E9408 INSTRUMENT GP Parts scheme
  For full view, you need register

Parts for your RT100 TELEHANDLER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3J-1907 [1] SEAL-O-RING  
2. 9X-4276 [1] SWITCH AS-PRESS (LIGHT)  
3. 7N-7781 [1] HOUSING-RECEPTACLE  
4. 7N-7779 [1] SOCKET  
5. 7N-7780 [2] PIN-CONNECTOR  
 

#SEBN86010089
 

9Y-7235: ALTERNATOR GP

9Y7235 ALTERNATOR GP
12 Volt, 60 Ampere
8C5510-Page 62
Part of 7C5477 Engine Arrangement
c498123 SEBN8601
9Y7235 ALTERNATOR GP Parts scheme
  For full view, you need register

Parts for your RT100 TELEHANDLER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8C-5510 Y [1] ALTERNATOR GP-CHARGING  
2. 7W-8807 [1] BRACKET  
3. 8T-7547 M [2] BOLT  
4. 8T-4197 M [2] BOLT  
5. 8T-4121 [4] WASHER  
6. 9Y-0083 [1] SPACER  
7. 8T-4178 M [1] BOLT  
8. 9Y-4197 [1] STRAP-ALTERNATOR ADJUSTING  
9. 8T-6466 M [1] BOLT  
10. 8T-4908 M [1] BOLT  
11. 7X-0579 [1] WASHER-HARD  
12. 9Y-7236 [1] WIRE AS  
13. 8T-4224 [2] WASHER  
14. 7X-2536 M [1] BOLT  
15. 8T-4189 M [1] BOLT  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

Information:

Special Instruction
Using The 6V4060 Engine Set Point Indicator Group{0781}
Using The 6V4060 Engine Set Point Indicator Group{0781}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Using the 1U7326 Governor Calibration Bench{1264, 0778}
Using the 1U7326 Governor Calibration Bench{1264, 0778}
Governor Performance Data{1264}
Governor Performance Data{1264}
Using the 127-3458 Sleeve Replacement Tool Group{1290}
Using the 127-3458 Sleeve Replacement Tool Group{1290}
Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}
Service Letter-NACD
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Service Letter-Truck/Ag/Marine
Technical Information Bulletin
Loose Rivet In Rack Control Assembly
Loose Rivet In Rack Control Assembly
Specifications
Governor Identification - Introduction
3114, 3116 and 3126 MUI Engine Governors
Governor (Type I)
3114, 3116 and 3126 MUI Engine Governors
Governor (Type II)
3114, 3116 and 3126 MUI Engine Governors
Governor (Type III)
3114, 3116 and 3126 MUI Engine Governors
Governor (Type IV)
3114, 3116 and 3126 MUI Engine Governors
Governor (Type V)
3114, 3116 and 3126 MUI Engine Governors
Governor (Type VI)
3114, 3116 and 3126 MUI Engine Governors
Specification
3114, 3116 and 3126 MUI Engine Governors
Governor Performance Data
3114, 3116 and 3126 MUI Engine Governors
Governor (Type VII)
3114, 3116 and 3126 MUI Engine Governors
Service Letter-China
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
Service Letter-Asia
Systems Operation
Governor Speed Circuit
3114, 3116 and 3126 MUI Engine Governors
Governor Limiting Circuit (Types I, II, III, and IV)
3114, 3116 and 3126 MUI Engine Governors
Governor Limiting Circuit (Types V, VI, and VII)
3114, 3116 and 3126 MUI Engine Governors
Fuel Ratio Control (Types I and IV)
3114, 3116 and 3126 MUI Engine Governors
Governor Servo (Types I, III, IV, V, VI, and VII)
3114, 3116 and 3126 MUI Engine Governors
Dashpot (Types I, III, IV, V, VI, and VII)
3114, 3116 and 3126 MUI Engine Governors
Governor Bias Spring (Most Types IV, V, and VI)
3114, 3116 and 3126 MUI Engine Governors
Governor Bumper Spring (Some Type IV)
3114, 3116 and 3126 MUI Engine Governors
Dual Horsepower (Type VI)
3114, 3116 and 3126 MUI Engine Governors
Dual Horsepower (Type VII)
3114, 3116 and 3126 MUI Engine Governors
Torque Limiter Device (Some Type V)
3114, 3116 and 3126 MUI Engine Governors
Information Release Memo
PRODUCT LINE ADDITION: REMAN 3524B HAA ENGINE AVAILABLE FOR 797A & 797B TRUCKS
PRODUCT LINE ADDITION: REMAN 3524B HAA ENGINE AVAILABLE FOR 797A & 797B TRUCKS
Service Letter-APD
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
Testing and Adjusting
Prepare Calibration Bench for Test Procedure
3114, 3116 and 3126 MUI Engine Governors
Installation of Governor on 1U7326 Governor Calibration Bench
3114, 3116 and 3126 MUI Engine Governors
Governor (Type VII) - Adjust
3114, 3116 and 3126 MUI Engine Governors
Setting the Governor Load Stop Dimension for More Than 9.00 mm
3114, 3116 and 3126 MUI Engine Governors
Governor (Types I, II, IV, and V) - Check
3114, 3116 and 3126 MUI Engine Governors
Throttle Lever Orientation (Types IV, V, VI, VII, and Some III) - Check
3114, 3116 and 3126 MUI Engine Governors
Governor (Type III) - Check
3114, 3116 and 3126 MUI Engine Governors
Governor (Type VI) - Check
3114, 3116 and 3126 MUI Engine Governors
Governor (Type VII) - Check
3114, 3116 and 3126 MUI Engine Governors
Governor (Types I, II, and Some III) - Adjust
3114, 3116 and 3126 MUI Engine Governors
Governor (Types IV and Some III) - Adjust
3114, 3116 and 3126 MUI Engine Governors
Governor (Type V) - Adjust
3114, 3116 and 3126 MUI Engine Governors
Governor (Type VI) - Adjust
3114, 3116 and 3126 MUI Engine Governors
Throttle Lever (Types IV, V, VI, VII, and Some III) - Remove
3114, 3116 and 3126 MUI Engine Governors
Throttle Lever (Types IV, V, VI, VII, and Some III) - Install
3114, 3116 and 3126 MUI Engine Governors
Governor - Adjust
3114, 3116, and 3126 Engines
Disassembly and Assembly
Governor & Fuel Transfer Pump
3114 ENGINE FOR RT80 & RT100 TELESCOPIC MATERIAL HANDLERS
Governor (Type I) - Disassemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type I) - Assemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type III) - Disassemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type III) - Assemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type IV) - Disassemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type IV) - Assemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type V) - Disassemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type V) - Assemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type VI) - Disassemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type VI) - Assemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type VII) - Disassemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type VII) - Assemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type II) - Disassemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type II) - Assemble
3114, 3116 and 3126 MUI Engine Governors
Governor - Install
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Governor - Remove
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Service Magazine
6V2029 Fixture Group Available For Adjustment Of Air/Fuel Ratio Control {0626,1278,0652}
1981/03/23
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator{0651}
1982/08/16
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint{1264}
1983/11/07
Comparison Of Fuel Timing Tolerances For Field Settings{1250,1251,1281}
1985/10/28
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing{1253}
1986/03/10
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers{1257,1264}
1986/06/09
Changes Have Been Made To OT Microfiche (Fuel Setting And Related Information){1250,1251,1281}
1986/06/16
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22
Nylon Seals Used On Lockwire To Seal Critical Areas; All Subsidiary Dealers Can Now Order Parts Service Seals {1257,1264}
1986/11/03
Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups{0781}
1987/03/16
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25
Modification To Rack Adjusting Tool Needed For Higher Rack Settings{0654,1257}
1978/10/16
9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28
Changes Made To 8S2243 And 8S4613 Wrenches Used On Fuel Injection Pumps{0612,1251}
1979/08/06
Some 4C4462 Sleeve Removal And Installation Groups For Unit Injectors May Contain 4C5562 Reamer Assemblies That Are Dimensionally Incorrect {0782,1290}
1990/05/21
New Control Assemblies Used In Fuel Injection Control Groups {1298}
1994/01/17
Tamper Resistant Plugs And Tamper Resistant Bolts Used To Prevent Changes To Fuel Ratio Control (FRC) Setting{1278,1287}
1996/01/22
Improvement Provides Better Sealing For Unit Injectors {1290}
1997/09/01
Lower O-Ring Seal Removed From Mechanical Fuel Injector Group{1290}
1998/03/23
New Fuel Shutoff Solenoids With Improved Durability Available {1259}
1999/03/22
New 173-1530 Injector Seating Tool Group Available {0710,1290}
1999/09/13

Caterpillar Parts SIS Catalog RT100 :

GOVERNOR GP-UNIT INJECTOR
100-6179 GOVERNOR GP-UNIT INJECTOR
GOVERNOR GP-UNIT INJECTOR
4P-5503 GOVERNOR GP-UNIT INJECTOR
GOVERNOR GP-UNIT INJECTOR
4P-4778 GOVERNOR GP-UNIT INJECTOR
GOVERNOR GP-UNIT INJECTOR
4P-7771 GOVERNOR GP-UNIT INJECTOR
GOVERNOR GP-UNIT INJECTOR
4P-7771 GOVERNOR GP-UNIT INJECTOR
4P-5790 GOVERNOR GP-UNIT INJECTOR
GOVERNOR GP-UNIT INJECTOR
9Y-3833 GOVERNOR GP-UNIT INJECTOR
CONTROL GP-GOVERNOR
7E-1524 CONTROL GP-GOVERNOR
DRIVE GP-GOV & TRANSFER PUMP
4P-4775 DRIVE GP-GOV & TRANSFER PUMP
DRIVE GP-GOV & TRANSFER PUMP
7E-8794 DRIVE GP-GOV & TRANSFER PUMP
CONTROL GP-FUEL INJECTION
7W-8600 CONTROL GP-FUEL INJECTION
LINES GP-FUEL FILTER
7W-9854 LINES GP-FUEL FILTER
LINES GP-GOVERNOR OIL
7W-8434 LINES GP-GOVERNOR OIL
FILTER GP-FUEL
1N-3476 FILTER GP-FUEL
FASTENER GP-GOVERNOR
7W-4812 FASTENER GP-GOVERNOR
INSTRUMENT GP
7E-9408 INSTRUMENT GP

Truck sale:

CATERPILLAR RT100 1995
$16,770 USD 
CATERPILLAR RT100 1995
- TELEHANDLER
FINNING (CANADA)
16830 107 Avenue NW - Edmonton - Alber
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.