AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

2D6400 CENTERSHIFT GROUP PART OF 2G9945 BLADE ARRANGEMENT LISTED ON PAGE 119 140B MOTOR GRADER


HYDRAULIC SYSTEM
CENTERSHIFT GP
OPERATOR STATION
CONTROL GP-STEERING
HYDRAULIC SYSTEM
PUMP GP-METERING
CYLINDER GP
CONTROL GP-POWER

MOTOR GRADER 140B MOTOR GRADER 61S
 140B MOTOR GRADER 61S00001-UP (MACHINE) POWERED BY 3306 ENGINE SEBP0627 140B 61S   (1979)

HYDRAULIC SYSTEM

CENTERSHIFT GP
CENTERSHIFT GP
2D-6400 CENTERSHIFT GP
 

#SEBP06270240
 

2D-6400: CENTERSHIFT GP

2D6400 CENTERSHIFT GROUP
PART OF 2G9945 BLADE ARRANGEMENT LISTED ON PAGE 119
c463860 SEBP0627
2D6400 CENTERSHIFT GP Parts scheme
  For full view, you need register

Parts for your 140B MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  9S-1354 [1] NUT  
  3B-4510 [1] LOCKWASHER  
  1B-8714 [1] KEY  
  3B-5067 [1] SHAFT  
  4D-1608 [1] SEAL  
  3B-7037 [2] WASHER  
  3B-9970 [1] WORM  
  1D-1158 [1] KEY  
  6F-2320 [2] BEARING  
    (Parts of 2D6379 Assem.)
  3B-5066 [1] SLEEVE  
  3B-2275 [1] KEY  
  1D-6489 [1] GASKET  
  5D-4010 [1] RACK  
  2D-6362 [24] SHIM (.010" THICK)  
  2D-6361 [21] SHIM (.015" THICK)  
  5B-7913 [8] SHIM (.010" THICK)  
  5D-0435 [7] SHIM (.015" THICK)  
  6D-3791 [8] SHIM (.015" THICK)  
  3J-9697 [16] SHIM (.005" THICK)  
  1B-4439 [1] NUT  
  3B-4618 [1] COTTER PIN  
  1D-6488 [1] CAP  
  0S-1590 [2] BOLT  
  3B-4506 [2] LOCKWASHER  
  1D-4599 [4] BOLT  
  4K-0367 [4] NUT  
  4D-3704 [4] WASHER  
  3D-9786 [1] BALL STUD  
  1B-4210 [1] NUT  
  5D-0433 [1] SLEEVE  
  1A-8063 [2] BOLT  
  3B-4512 [2] LOCKWASHER  
  6F-6992 [1] CAP  
  3B-8489 [1] FITTING  
  0S-1575 [6] BOLT  
  6B-5310 [4] BOLT  
  1B-4207 [10] NUT  
  3B-4512 [10] LOCKWASHER  
  3B-8489 [3] FITTING  
  7F-1327 [6] SHIM  
  7B-2503 [1] PIN  
  7B-2499 [1] RING  
  [2] PIN  
    (Part of 2D6379 Assem.)
  2B-0858 [2] PLUG  
  5F-5434 [1] VENT  
  3K-3318 [2] BOLT  
  1D-5119 [2] NUT  
  3B-8489 [1] FITTING  
  1B-4518 [1] NUT  
  3B-4632 [1] PIN  
  2D-6380 [1] GASKET  
  4D-1643 [1] COVER ASSEM.  
  2Y-2423 [11] SHIM (LONG)  
  2Y-2422 [11] SHIM (SHORT)  
  2D-6377 [1] SLEEVE  
  4D-1644 [1] BEARING  
    (Part of 4D1643 Assem.)
  6D-6444 [1] RAIL ASSEM.  
  1A-2029 [7] BOLT  
  3B-4506 [7] LOCKWASHER  
  1B-4367 [8] BOLT  
  1D-4720 [8] NUT  
  3B-4510 [8] LOCKWASHER  
  2D-6382 [1] GEAR (32 TEETH)  
  3D-2909 [1] BEARING  
    (Part of 2D6379 Assem.)
  2D-6379 [1] HOUSING ASSEM.  
  3J-0378 [1] SEAL  
  2D-6381 [1] PINION (9 TEETH)  
  1A-3103 [4] BOLT  
  7D-7859 [1] SUPPORT  
  7D-2199 [1] SLEEVE ASSEM.  
  7D-2267 [1] LINK ASSEM.  
  3B-6082 [2] SHIM  
  8S-9092 [2] BOLT  
  3B-4510 [2] LOCKWASHER  
  6B-3226 [1] CAP  
  3B-8489 [1] FITTING  
 

#SEBP06270241
 

6G-0070: CONTROL GP-STEERING

6G0070 STEERING CONTROL GROUP-PART 1
SERIAL NO. 61S1 TO 61S1035 INCLUSIVE
3G9801 METERING PUMP PARTS ARE SHOWN ON PAGE 104
c224864 SEBP0627
6G0070 CONTROL GP-STEERING Parts scheme
  For full view, you need register

Parts for your 140B MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1G-0591 [1] COVER  
2. 2Y-2231 [1] STEERING WHEEL  
3. 2B-2695 [4] BOLT  
4. 3B-4505 [12] LOCKWASHER  
5. [1] COVER ASSEM.  
    (Includes)
6. [2] LUG ASSEM.  
    (Each Includes)
  9F-6409 [1] PIN  
7. 2Y-2159 [2] ADAPTER  
8. 4J-7002 [2] STRAP  
9. 2Y-3662 [1] HOSE ASSEM. 105 cm(41.5 in.)  
10. 8M-1630 [4] CLAMP  
11. 2D-1076 [1] CLAMP  
12. 2Y-2152 [1] TUBE ASSEM.  
13. 0S-0509 [4] BOLT  
14. 3B-4506 [8] LOCKWASHER  
15. 5H-3125 [4] CLAMP  
16. 6G-0232 [1] TUBE ASSEM.  
17. 5F-7054 [2] SEAL  
18. 4B-3388 [8] BOLT  
19. 6G-0231 [1] TUBE ASSEM.  
20. 7F-6696 [2] FITTING  
    (Each Includes)
  3H-1833 [2] NUT  
  3H-1834 [2] SLEEVE  
21. 0L-1351 [1] BOLT  
22. 0T-0431 [3] WASHER  
23. 1A-9579 [4] BOLT  
  1D-4716 [4] NUT  
24. 2Y-2151 [1] TUBE ASSEM.  
25. 2Y-3659 [1] HOSE ASSEM. 99 cm.(39 in.)  
26. 0S-1594 [3] BOLT  
27. 2Y-2157 [1] SUPPORT  
28. 3G-9801 Y [1] PUMP GROUP  
    (Separate Illustration)
  Y   SEPARATE ILLUSTRATION
 

#SEBP06270242
 

6G-0070: CONTROL GP-STEERING

6G0070 STEERING CONTROL GROUP-PART 2
SERIAL NO. 61S1 TO 61S1035 INCLUSIVE
4J4115 STEERING CYLINDER PARTS ARE SHOWN ON PAGE 105
c224865 SEBP0627
6G0070 CONTROL GP-STEERING Parts scheme
  For full view, you need register

Parts for your 140B MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1A-4168 [1] NUT  
  3B-4520 [1] LOCKWASHER  
2. 3D-0404 [1] WASHER  
3. 4B-3388 [16] BOLT  
  4B-4277 [16] WASHER  
4. 1P-4574 [8] FLANGE  
5. 4J-4115 Y [1] CYLINDER GROUP  
    (Separate Illustration)
6. 7B-3235 [8] BOLT  
7. 3B-4508 [10] LOCKWASHER  
8. 3B-8489 [3] FITTING  
9. 3D-0444 [2] PIN  
10. 3D-6731 [1] BLOCK  
11. 1A-1952 [1] BOLT  
  9B-1006 [1] WASHER  
12. 2Y-2221 [1] COVER  
13. 0T-0102 [4] BOLT  
  3B-4506 [4] LOCKWASHER  
14. 5M-5016 [2] NUT  
  3D-6711 [1] LOCK  
  3D-0403 [1] WASHER  
15. 2Y-2158 [1] SHAFT  
16. 3D-0409 [1] ARM  
17. 0V-0375 [1] BOLT  
  1D-4719 [1] NUT  
18. 4D-7358 [1] PIN  
19. 6D-1599 [1] BLOCK  
20. 2Y-1993 [1] SHAFT  
21. 1G-1672 [1] NUT  
22. 3B-4622 [2] COTTER  
23. 3B-8488 [1] FITTING  
24. 3D-4505 [2] BEARING  
25. 1F-1470 [1] CAP  
26. 1B-4438 [1] NUT  
27. 2Y-2166 [1] HOSE ASSEM.  
    (For parts service furnish:)
  9S-0671 G HOSE 14.12 in. (35.8 cm)  
  8M-1619 [1] STEM (straight)  
  8M-2710 [1] STEM (90 degrees)  
  8M-1630 [4] CLAMP  
  1A-9579 [4] BOLT  
  1D-4716 [4] NUT  
28. 5F-7054 [4] SEAL  
29. 2Y-2165 [1] HOSE ASSEM.  
    (For parts service furnish:)
  9S-0671 G HOSE 10 in. (25.4 cm)  
  8M-1619 [1] STEM (straight)  
  8M-2706 [1] STEM (30 degrees)  
  8M-1630 [4] CLAMP  
  G   ORDER BY THE INCH
  Y   SEPARATE ILLUSTRATION
 

#SEBP06270243
 

6G-0070: CONTROL GP-STEERING

6G0070 STEERING CONTROL GROUP-PART 1
SERIAL NO. 61S1036-UP
3G9801 METERING PUMP PARTS ARE SHOWN ON PAGE 104
c470621 SEBP0627
6G0070 CONTROL GP-STEERING Parts scheme
  For full view, you need register

Parts for your 140B MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1G-0591 [1] COVER  
2. 2Y-2231 [1] STEERING WHEEL  
3. 2B-2695 [2] BOLT  
4. 3B-4505 C [8] LOCKWASHER  
5. 2Y-3679 C [1] COVER AS  
6. 4B-4278 C [4] WASHER  
7. 8M-0506 C [2] CONNECTOR  
8. 7K-1181 [1] STRAP-CABLE  
9. 2Y-5635 CI [1] HOSE AS  
10. 8M-1630 [4] CLAMP  
11. 6D-7114 C [2] STRAP  
12. 2Y-5638 C [2] TUBE AS  
13. 0S-0509 [4] BOLT  
14. 3B-4506 [7] LOCKWASHER  
15. 5H-3125 [4] CLAMP  
16. 2Y-5640 C [1] TUBE AS  
17. 5F-7054 [2] SEAL-O-RING  
18. 4B-3388 [8] BOLT  
19. 2Y-5642 C [1] TUBE AS  
20. 1G-0973 C [2] FITTING  
    (EACH INCLUDES)
  1G-0969 [2] NUT-FITTING  
  1G-0972 [2] SLEEVE-FITTING  
21. 0S-1590 C [2] BOLT  
  1B-5964 [2] SPACER  
22. 0T-0431 [2] WASHER  
23. 1A-9579 [4] BOLT  
  1D-4716 [4] NUT-FULL  
24. 1D-4717 C [2] NUT  
25. 2Y-5636 CI [1] HOSE AS  
26. 0S-1594 [3] BOLT  
27. 2Y-2157 [1] SUPPORT  
28. 3G-9801 Y [1] PUMP GP-METERING  
29. 3J-1907 C [2] SEAL  
30. 0S-1617 C [2] BOLT  
  9M-1974 [4] WASHER  
  C   CHANGE FROM PREVIOUS TYPE
  I   SEE HOSE FABRICATION GUIDE
  Y   SEPARATE ILLUSTRATION
 

#SEBP06270244
 

6G-0070: CONTROL GP-STEERING

6G0070 STEERING CONTROL GROUP-PART 2
SERIAL NO. 61S1036-UP
4J4115 STEERING CYLINDER PARTS ARE SHOWN ON PAGE 105
c470622 SEBP0627
6G0070 CONTROL GP-STEERING Parts scheme
  For full view, you need register

Parts for your 140B MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1A-4168 [1] NUT  
  3B-4520 [1] LOCKWASHER  
2. 3D-0404 [1] WASHER  
3. 4B-3388 [16] BOLT  
  9M-1974 C [16] WASHER  
4. 2Y-1346 C [8] FLANGE  
5. 4J-4115 Y [1] CYLINDER GP-STEER  
6. 7B-3235 [8] BOLT  
7. 3B-4508 [10] LOCKWASHER  
8. 3B-8489 [4] FITTING-GREASE  
9. 3D-0444 [2] PIN  
10. 3D-6731 [1] BLOCK  
11. 6F-7033 C [1] BOLT  
  9B-1006 [1] WASHER  
12. 2Y-2221 [1] COVER  
13. 0T-0102 [4] BOLT  
  3B-4506 [4] LOCKWASHER  
14. 5M-5016 [2] NUT  
  3D-6711 [1] LOCK  
  3D-0403 [1] WASHER  
15. 2Y-2158 [1] SHAFT  
16. 3D-0409 [1] ARM-PITMAN  
17. 0V-0375 [1] BOLT  
  1D-4719 [1] NUT  
18. 4D-7358 [1] PIN  
19. 6D-1599 [1] BLOCK  
20. 2Y-1993 [1] SHAFT  
21. 1G-1672 [1] NUT  
22. 3B-4622 [2] COTTER  
23. 2B-7557 [4] CORK  
24. 2Y-2165 I [1] HOSE AS  
25. 1F-1470 [1] CAP  
26. 1B-4438 [1] NUT  
27. 2Y-2166 I [1] HOSE AS  
28. 5F-7054 [4] SEAL-O-RING  
29. 3D-4505 [2] BEARING  
  C   CHANGE FROM PREVIOUS TYPE
  I   SEE HOSE FABRICATION GUIDE
  Y   SEPARATE ILLUSTRATION
 

#SEBP06270245
 

3G-9801: PUMP GP-METERING

3G9801 METERING PUMP GROUP
PART OF 6G0070 STEERING CONTROL GROUP SHOWN ON PAGES 102 & 103.01
c477115 SEBP0627
3G9801 PUMP GP-METERING Parts scheme
  For full view, you need register

Parts for your 140B MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 068-6750 [1] COMMUTATOR & RING AS  
2. 068-6749 [1] MANIFOLD  
3. 2Y-2705 [1] ROTOR SET  
4. 068-6747 [1] SPACER  
5. 1T-0416 [4] BOLT  
6. 068-7652 [1] RACE-SPECIAL THRUST  
7. 068-6733 [1] BEARING-THRUST  
8. 068-6732 [1] WASHER-THRUST  
9. 068-6728 [1] RING-RETAINING  
10. 6L-6035 [1] DOWEL  
11. 069-4257 [1] COVER  
12. 2D-6398 [1] RING-RETAINING  
13. 035-8038 [1] SHAFT-INPUT  
14. 000-6321 [1] NUT  
15. 035-4297 [1] BAR-TORSION  
16. 068-6729 [4] SHIM  
  068-6730 [4] SHIM  
  068-6731 [1] SHIM  
  068-7651 [1] SHIM  
17. 035-4296 [1] WASHER-SPRING  
18. 068-6735 [1] SPACER  
19. 4B-9880 [1] BALL  
20. 068-6734 [1] SPRING-BALL  
21. 068-6739 [1] RING-SEAL  
22. 068-6737 [2] PLUG AS  
    (EACH INCLUDES)
  3G-1209 [1] SEAL-O-RING  
23. 068-6726 [1] RING-DRIVE  
24. 2D-6642 [1] BALL  
25. 2Y-2733 [1] SPACER-DRIVE LINK  
26. 2Y-2734 [1] LINK-DRIVE  
27. 2Y-3737 [1] SEAL-ROTOR  
28. 2Y-2955 [1] RETAINER-SEAL  
29. 1F-4111 [7] BOLT  
30. 068-6754 [1] COVER AS-END  
31. 068-6753 [1] WASHER  
32. 8F-9538 [1] SEAL-O-RING  
 

#SEBP06270246
 

4J-4115: CYLINDER GP-STEER

4J4115 STEERING CYLINDER GROUP-100 MM (4")BORE X 150 MM(6")STROKE
PART OF 6G0070 STEERING CYLINDER GROUP SHOWN ON PAGES 103 & 103.02
c180205 SEBP0627
4J4115 CYLINDER GP-STEER Parts scheme
  For full view, you need register

Parts for your 140B MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  5J-7131 [1] PISTON  
  5J-7154 [1] RING  
  5J-4561 [1] NUT  
  5J-5402 [1] SEAL ASSEM.  
  5J-5401 C [1] RING  
  5J-5400 [1] SEAL  
  4J-4116 [1] CYLINDER ASSEM.  
  3D-6222 [2] BEARING  
  7J-7132 [1] HEAD ASSEM.  
  7J-4718 [1] HEAD  
    (Part of 7J7132 Assem.)
  3D-6220 [1] ROD ASSEM.  
  4J-4082 [2] BEARING  
    (Part of 3D6220 Assem.)
  3B-8489 [1] FITTING  
  4B-4550 [1] FITTING  
  4J-8979 [1] SEAL  
  5J-8150 [1] SEAL  
  6J-9733 [1] SEAL  
  0S-1625 [4] BOLT  
  3B-4510 [4] LOCKWASHER  
  1H-8128 [1] SEAL  
  2K-6830 [1] RING  
  C   INDICATES CHANGE
 

#SEBP06270247
 

2G-9946: SHAFT GP-LEANING WHEEL CONTROL

2G9946 LEANING WHEEL CONTROL SHAFT GROUP
SERIAL NO. 61S1 TO 61S1075 INCLUSIVE
8D1567-PAGE 107.01 & 8D1502-PAGE 107
8D1566-PAGE 108.01 & 8D1505-PAGE 108
c224548 SEBP0627
2G9946 SHAFT GP-LEANING WHEEL CONTROL Parts scheme
  For full view, you need register

Parts for your 140B MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  7D-1739 [1] SHAFT ASSEM.  
  7D-2059 [1] JOINT ASSEM.  
    (Part of 7D1739 Assem.)
    Includes:
  8D-1505 Y [1] JOINT ASSEM.  
    -OR-
  8D-1566 Y [1] JOINT ASSEM.  
    (See Separate Illustration)
  7D-1741 [1] SHAFT ASSEM  
  7D-2058 [1] JOINT ASSEM.  
    (Part of 7D1741 Assem.)
    Includes:
  8D-1502 Y [1] JOINT ASSEM.  
    -OR-
  8D-1567 Y [1] JOINT ASSEM.  
    (See Separate Illustration)
  9S-1354 [2] NUT  
  3B-4510 [2] LOCKWASHER  
  1B-8714 [2] KEY  
  4D-3591 [1] SHAFT  
  5B-1104 [1] BEARING  
  0S-1594 [2] BOLT  
  3B-4506 [2] LOCKWASHER  
  3B-8489 [1] FITTING  
  3B-8489 [4] FITTING  
  6F-1750 [1] SLEEVE  
  6F-1752 [1] SHAFT  
  1F-2692 [1] BUSHING  
  6F-8921 [1] BUSHING  
  1F-2694 [1] BUSHING  
  1F-1310 [1] BUSHING  
  4D-1608 [1] SEAL  
  7B-5327 [2] SHIM  
  6F-1769 [1] COVER  
  6F-1770 [2] GASKET  
  7D-2059 [1] JOINT ASSEM.  
    (Part of 7D1846 Assem.)
    Includes:
  8D-1505 Y [1] JOINT ASSEM.  
    -OR-
  8D-1566 Y [1] JOINT ASSEM.  
    (See Separate Illustration)
  7D-1844 [1] SHAFT ASSEM.  
  7D-2058 [1] JOINT ASSEM.  
    (Part of 7D1844 Assem.)
    Includes:
  8D-1502 Y [1] JOINT ASSEM.  
    -OR-
  8D-1567 Y [1] JOINT ASSEM.  
    (See Separate Illustration)
  6F-1753 [1] GEAR (13 teeth)  
  1D-2611 [1] SLEEVE  
  6F-7043 [1] NUT  
  6H-0209 [1] WASHER  
  3B-4618 [1] COTTER PIN  
  6F-1754 [1] GEAR (19 teeth)  
  9S-1354 [1] NUT  
  3B-4510 [1] LOCKWASHER  
  6F-1751 [1] SHAFT  
  1B-8714 [1] KEY  
  1A-4590 [2] RING (snap)  
  5D-3283 [1] COUPLING  
  6F-7002 [2] PIN  
  1B-5082 [5] BOLT  
  3B-4506 [5] LOCKWASHER  
  6F-1772 [1] CASE  
  7D-1846 [1] SHAFT ASSEM.  
  Y   SEPARATE ILLUSTRATION
 

#SEBP06270248
 

2G-9946: SHAFT GP-LEANING WHEEL CONTROL

2G9946 SHAFT GP-LEANING WHEEL CONTROL
S/N 61S1076-1095
2Y5394-PAGE 120.01 & 2Y5396-PAGE 120.02
c321348 SEBP0627
2G9946 SHAFT GP-LEANING WHEEL CONTROL Parts scheme
  For full view, you need register

Parts for your 140B MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2Y-6719 C [1] SHAFT AS-CONTROL  
2. 2Y-5396 Y [1] JOINT AS  
3. 2Y-5389 [1] PIN  
4. 2Y-6720 C [1] SHAFT AS-CONTROL  
5. 2Y-5394 Y [1] JOINT AS  
6. 2Y-5389 [1] PIN  
7. 9S-1354 [3] NUT  
8. 3B-4510 [3] LOCKWASHER  
9. 1B-8714 [3] KEY-WOODRUFF  
10. 4D-3591 [1] SHAFT  
11. 5B-1104 [1] BEARING  
12. 0S-1594 [2] BOLT  
13. 3B-8489 [5] FITTING-GREASE  
14. 6F-1750 [1] SLEEVE  
15. 6F-1752 [1] SHAFT  
16. 6F-2416 [1] CASE AS  
  6F-1772 [1] CASE  
17. 1F-2692 [1] BEARING  
18. 6F-8921 [1] BUSHING  
19. 1F-2694 [1] BUSHING  
20. 1F-1310 [1] BUSHING  
21. 7B-5327 B [2] SHIM  
22. 3B-4506 [7] LOCKWASHER  
23. 6F-7002 [2] PIN  
24. 1B-5082 [5] BOLT  
25. 6F-1753 [1] GEAR (13 TEETH)  
26. 1D-2611 [1] SLEEVE  
27. 6F-7043 [1] NUT-SLOTTED  
28. 3B-4618 [1] COTTER  
29. 6H-0209 [1] WASHER  
30. 6F-1751 [1] SHAFT  
31. 4D-1608 [1] SEAL  
32. 2Y-6726 C [1] SHAFT AS-CONTROL  
33. 2Y-5396 Y [1] JOINT AS  
34. 2Y-5389 [1] PIN  
35. 2Y-6727 C [1] SHAFT AS-CONTROL  
36. 2Y-5394 Y [1] JOINT AS  
37. 2Y-5389 [1] PIN  
38. 6F-1754 [1] GEAR (19 TEETH)  
39. 6F-1769 [1] COVER  
40. 6F-1770 [2] GASKET  
41. 1A-4590 [2] RING (SNAP)  
42. 5D-3283 [1] COUPLING  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP06270249
 

2G-9946: SHAFT GP-LEANING WHEEL CONTROL

2G9946 SHAFT GP-LEANING WHEEL CONTROL
S/N 61S1096-UP
2Y7205-PAGE 120.06 & 2Y7207-PAGE 120.05
c351105 SEBP0627
2G9946 SHAFT GP-LEANING WHEEL CONTROL Parts scheme
  For full view, you need register

Parts for your 140B MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0L-1351 [4] BOLT  
  2Y-7189 C [1] SHAFT AS  
  2Y-7188 [1] SHAFT  
2. 2Y-7205 Y [1] JOINT AS  
3. 2Y-5389 [1] PIN  
4. 2Y-7199 C [1] SHAFT AS  
  2Y-7198 [1] SHAFT  
5. 2Y-7207 Y [1] JOINT AS  
6. 2Y-5389 [1] PIN  
7. 9S-1354 [3] NUT  
8. 3B-4510 [3] LOCKWASHER  
9. 1B-8714 [3] KEY-WOODRUFF  
10. 4D-3591 [1] SHAFT  
11. 5B-1104 [1] BEARING  
12. 0S-1594 [2] BOLT  
13. 3B-8489 [5] FITTING-GREASE  
14. 6F-1750 [1] SLEEVE  
15. 6F-1752 [1] SHAFT  
16. 6F-2416 [1] CASE AS  
  6F-1772 [1] CASE  
17. 1F-2692 [1] BEARING  
18. 6F-8921 [1] BUSHING  
19. 1F-2694 [1] BUSHING  
20. 1F-1310 [1] BUSHING  
21. 7B-5327 B [2] SHIM  
22. 3B-4506 [7] LOCKWASHER  
23. 6F-7002 [2] PIN  
24. 1B-5082 [5] BOLT  
25. 6F-1753 [1] GEAR (13 TEETH)  
26. 1D-2611 [1] SLEEVE  
27. 1B-4439 C [1] NUT-SLOTTED  
28. 3B-4618 [1] COTTER  
29. 8B-4037 C [1] WASHER  
30. 6F-1751 [1] SHAFT  
31. 4D-1608 [1] SEAL  
32. 2Y-7201 C [1] SHAFT AS  
  2Y-7200 [1] SHAFT  
33. 2Y-7205 Y [1] JOINT AS  
34. 2Y-5389 [1] PIN  
35. 2Y-7191 C [1] SHAFT AS  
  2Y-7190 [1] SHAFT  
36. 2Y-7207 Y [1] JOINT AS  
37. 2Y-5389 [1] PIN  
38. 6F-1754 [1] GEAR (19 TEETH)  
39. 6F-1769 [1] COVER  
40. 6F-1770 [2] GASKET  
41. 1A-4590 [2] RING (SNAP)  
42. 5D-3283 [1] COUPLING  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

Information:

Caterpillar Parts SIS Catalog 140B :

HOOD GP
2G-9885 HOOD GP
DRAWBAR GP
2G-9990 DRAWBAR GP
CIRCLE GP
2G-0010 CIRCLE GP
CIRCLE GP
2G-0010 CIRCLE GP
2G-0015 FRAME GP
FRAME GP
2G-0015 FRAME GP
2G-0015 FRAME GP
FRAME GP
2G-0015 FRAME GP
CONTROL GP-STEERING
6G-0070 CONTROL GP-STEERING
6G-0070 CONTROL GP-STEERING
CONTROL GP-STEERING
6G-0070 CONTROL GP-STEERING
6G-0070 CONTROL GP-STEERING
PUMP GP-METERING
3G-9801 PUMP GP-METERING
CYLINDER GP-STEER
4J-4115 CYLINDER GP-STEER
SHAFT GP-LEANING WHEEL CONTROL
2G-9946 SHAFT GP-LEANING WHEEL CONTROL
SHAFT GP-LEANING WHEEL CONTROL
2G-9946 SHAFT GP-LEANING WHEEL CONTROL

Truck sale:

1988 CAT 140B
USD $24,898 
1988 CAT 140B

Birmaq
São José Dos Pinhais, PARANA, Brazil
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.