AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

4N6714 FUEL INJECTION PUMP GROUP--Part 1 of 2 Part of Fuel Pump Housing, Drive and Governor shown on Page 28 772


FUEL SYSTEM
PUMP GP-FUEL INJECTION
GOVERNOR GP
TORQUE CONTROL GP
CONTROL GP-FUEL RATIO
CONTROL GP-GOVERNOR
LINES GP-FUEL INJECTION

TRACTOR 772 TRACTOR 11S
 772 TRACTOR 11S00001-UP (MACHINE) SEBP1001 772 11S   (1975)

FUEL SYSTEM

PUMP GP-FUEL INJECTION
PUMP-DRIVE & GOVERNOR GP
8S-6460 PUMP-DRIVE & GOVERNOR GP
FUEL INJECTION PUMP GROUP
4N-6714 FUEL INJECTION PUMP GROUP
4N-6714 FUEL INJECTION PUMP GROUP
DRIVE AS-VARIABLE TIMING
4N-6680 DRIVE AS-VARIABLE TIMING
 

#SEBP10010050
 

4N-6714: FUEL INJECTION PUMP GROUP

4N6714 FUEL INJECTION PUMP GROUP--Part 1 of 2
Part of Fuel Pump Housing, Drive and Governor shown on Page 28
c203328 SEBP1001
4N6714 FUEL INJECTION PUMP GROUP Parts scheme
  For full view, you need register

Parts for your 772 TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7S-3651 [1] HOUSING ASSEM.  
2. 9H-4926 [1] FERRULE  
3. 1P-7325 [2] BEARING  
4. 4F-6448 [1] DOWEL  
5. 2D-6642 [10] BALL  
6. 8M-8489 [8] DOWEL  
7. 0L-2061 [2] DOWEL  
9. 2S-3145 [4] GUIDE  
10. 2S-2055 [3] BEARING  
    (Parts of 7S3651 Housing Assem.)
11. 2S-3961 [1] SLEEVE  
12. 2S-2039 [1] BEARING  
13. 6F-0984 [1] DOWEL  
15. 1A-4672 [1] PLUG  
16. 5M-6214 [1] PLUG  
    (Parts of 7S3651 Assem.)
17. 0S-1594 [2] BOLT  
  2A-5222 [2] WASHER  
18. 2S-7502 [1] GASKET  
19. 2S-7274 [1] LEVER ASSEM.  
20. 2S-7271 [1] PIN  
21. 2S-2389 [1] COVER  
22. 4N-6716 [1] CAMSHAFT  
23. 0S-1618 [2] BOLT  
  4S-5659 [1] LOCK  
24. 8S-1917 [1] SHAFT ASSEM.  
  [1] DOWEL  
25. 2B-2695 [10] BOLT  
  3B-4505 [10] LOCKWASHER  
26. 2S-2407 [1] GASKET  
27. 5S-0595 [1] PIN ASSEM.  
 

#SEBP10010051
 

4N-6714: FUEL INJECTION PUMP GROUP

4N6714 FUEL INJECTION PUMP GROUP--Part 2 of 2
Part of Fuel Pump Housing, Drive and Governor shown on Page 28
c166506 SEBP1001
4N6714 FUEL INJECTION PUMP GROUP Parts scheme
  For full view, you need register

Parts for your 772 TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9S-2359 H [8] LIFTER ASSEM. 3.47 cm(1.367 in.)  
  9S-2360 H [8] LIFTER ASSEM. 3.48 cm(1.371 in.)  
  9S-2361 H [8] LIFTER ASSEM. 3.49 cm(1.375 in.)  
  9S-2362 H [8] LIFTER ASSEM. 3.50 cm(1.379 in.)  
  9S-2363 H [8] LIFTER ASSEM. 3.51 cm(1.383 in.)  
2. 2S-4663 C [12] SEAL  
3. 3B-1915 [16] BOLT  
  3B-4506 [16] LOCKWASHER  
4. 3S-1467 C [8] PUMP GROUP  
    (Each Includes)
5. 2S-1873 C [1] SPRING  
6. 2S-1874 C [1] WASHER  
7. 2S-7270 [1] GASKET  
8. 2A-5220 [1] PLUG  
9. [1] WASHER  
10. 2B-2695 [4] BOLT  
  4B-4277 [4] WASHER  
11. 2S-8010 [1] RACK  
12. 2M-4453 C [24] SEAL  
13. 2S-7267 [1] COVER  
  C   INDICATES CHANGE
  H   DIM. X
 

#SEBP10010052
 

4N-6680: DRIVE AS-VARIABLE TIMING

4N6680 VARIABLE TIMING DRIVE ASSEMBLY
Part of 8S6460 Fuel Pump Housing, Drive and Governor Group shown on Page 28
c206524 SEBP1001
4N6680 DRIVE AS-VARIABLE TIMING Parts scheme
  For full view, you need register

Parts for your 772 TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4S-9497 [ 1] SHAFT ASSEM.  
2. 7S-8790 [ 1] SPRING  
3. 4N-6679 [ 1] COUPLING  
4. 2S-0978 C [ 1] VALVE  
5. 2S-0987 [ 2] DOWEL  
6. 4N-5397 [ 1] PISTON ASSEM.  
7. 6N-3578 C [ 1] SPRING  
8. 4S-6904 [ 2] WEIGHT  
9. 4S-9714 [ 1] NUT  
10. 5H-4792 [ 2] PIN  
11. 4S-9487 [ 1] DOWEL  
12. 4S-9486 [ 1] RETAINER  
13. 3B-0551 [ 1] PLUG  
    INDICATES CHANGE
 

#SEBP10010053
 

4N-4359: SPRING GP-GOVERNOR TORQUE

4N4359 GOVERNOR TORQUE SPRING GROUP--Type 1
c150613 SEBP1001
4N4359 SPRING GP-GOVERNOR TORQUE Parts scheme
  For full view, you need register

Parts for your 772 TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9M-6292 [1] LOCK  
2. 8M-9062 [1] RETAINER  
3. 4N-4218 [1] CONTACT  
4. 9S-9003 [1] SPRING  
5. 2S-7391 [1] BAR  
6. 2S-7390 [1] SPACER .032 in. (0.82 mm) thick  
7. 8L-8601 [1] SPACER .002 in. (0.06 mm) thick  
  9L-3626 [1] SPACER .016 in. (0.41 mm) thick  
  5S-2620 [1] SPACER .078 in. (1.99 mm) thick  
8. 1P-6452 [1] INSULATOR  
9. 4F-7957 [2] BOLT  
 

#SEBP10010054
 

4N-4359: SPRING GP-GOVERNOR TORQUE

4N4359 GOVERNOR TORQUE SPRING GROUP--Type 2
c167250 SEBP1001
4N4359 SPRING GP-GOVERNOR TORQUE Parts scheme
  For full view, you need register

Parts for your 772 TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9M-6292 [1] LOCK  
2. 8M-9062 [1] RETAINER  
3. 9L-7235 C [1] SHIM .991 mm(.039 in.) thick  
4. 9S-9003 [1] SPRING  
5. 2S-7391 [1] BAR  
6. 1P-9958 C [1] INSULATOR  
7. 4F-7957 [2] BOLT  
8. 8L-8601 [1] SPACER .051 mm(.002 in.) thick  
  9L-3626 [1] SPACER .41 mm(.016 in.) thick  
  5S-2620 [1] SPACER 1.98 mm(.078 in.) thick  
9. 4N-4218 [1] CONTACT  
10. 1P-6452 [1] INSULATOR  
  C   INDICATES CHANGE
 

#SEBP10010055
 

2P-8708: CONTROL GP-FUEL RATIO

2P8708 FUEL RATIO CONTROL GROUP--With Override
Serial No. 11S1 to 11S175 and 11S179 inclusive
c204909 SEBP1001
2P8708 CONTROL GP-FUEL RATIO Parts scheme
  For full view, you need register

Parts for your 772 TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6L-5766 [1] GASKET  
2. 2P-8875 [1] RETAINER ASSEM.  
3. 6N-0513 [1] SPRING  
4. 6N-0515 [1] SPRING  
5. 6N-0514 [1] SPRING  
6. 2P-8643 [1] GASKET  
7. 2P-8234 [1] SEAL  
8. 5K-0227 [1] SEAL  
9. 2P-8225 [1] HOUSING  
10. 2P-8802 [1] VALVE ASSEM.  
11. 2P-8801 [1] RETAINER  
12. 2P-8804 [1] DIAPHRAGM  
13. 2P-8803 [1] WASHER  
14. 6L-2376 [2] BOLT 1.125 in. (2.86 cm) long  
  4N-8111 [2] BOLT 3.50 in. (8.89 cm) long  
  9M-1974 [4] WASHER  
15. 2P-8226 [1] COVER  
16. 2P-8882 [1] COVER  
17. 2P-8939 [1] VALVE  
18. 9F-7882 C [1] PIN  
19. 4J-2506 [1] SEAL  
21. 2N-5919 [3] BOLT  
  5P-0537 [3] WASHER  
  C   INDICATES CHANGE
 

#SEBP10010056
 

2P-8708: CONTROL GP-FUEL RATIO

2P8708 FUEL RATIO CONTROL GROUP--With Override
Serial No. 11S176 to 11S178 and 11S180-Up and Engine Serial No. 73X1-Up
c169285 SEBP1001
2P8708 CONTROL GP-FUEL RATIO Parts scheme
  For full view, you need register

Parts for your 772 TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6L-5766 [1] GASKET  
2. 2P-8875 [1] RETAINER ASSEM.  
3. 6N-0513 [1] SPRING  
4. 6N-0515 [1] SPRING  
5. 7N-0209 C [1] SPRING  
6. 2P-8643 [1] GASKET  
7. 2P-8234 [1] SEAL  
8. 3P-1979 C [1] SEAL  
9. 2P-8225 [1] HOUSING  
10. 2P-8802 [1] VALVE ASSEM.  
11. 2P-8801 [1] RETAINER  
12. 2P-8804 [1] DIAPHRAGM  
13. 2P-8803 C [1] WASHER  
14. 1F-4111 C [1] BOLT 3.50 in.(8.89 cm) long  
  4N-8111 C [1] BOLT 3.50 in.(8.89 cm) long  
    (Drilled Head)
15. 3B-4505 C [2] LOCKWASHER  
16. 4B-3388 C [2] BOLT 1.125 in.(2.86 cm) long  
17. 8F-7242 C [4] WASHER  
18. 2P-8226 [1] COVER  
19. 6N-7148 C [1] COVER  
20. 2P-8939 [1] VALVE  
21. 7N-5715 C [1] PIN  
22. 4J-2506 [1] SEAL  
23. 0S-1347 C [1] BOLT (Drilled Head)  
  0S-1615 C [2] BOLT  
  9S-5282 C [3] WASHER  
  C   INDICATES CHANGE
 

#SEBP10010057
 

7D-3520: GOVERNOR CONTROL

GOVERNOR CONTROL (7D3520 N/S)--Part 1 of 2
c141978 SEBP1001
7D3520 GOVERNOR CONTROL Parts scheme
  For full view, you need register

Parts for your 772 TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7D-7317 [1] SHAFT  
2. 7D-7309 [1] SPRING  
3. 1B-8704 [2] KEY  
4. 0S-1591 [4] BOLT  
5. 1D-4717 [7] NUT  
6. 0S-1588 [5] BOLT  
7. 3B-4506 [12] LOCKWASHER  
8. 7D-3528 [1] BRACKET ASSEM.  
9. 4D-2619 [2] BEARING  
10. 4B-4281 [2] WASHER  
11. 8M-3175 [2] WASHER  
12. 7D-7598 [2] END  
13. 7D-7337 [1] ROD  
14. 0S-1590 [1] BOLT  
15. 7D-4529 [1] SHAFT  
16. 7D-4586 [1] BRACKET ASSEM.  
17. 1K-6641 [1] BUSHING  
18. 6B-4195 [1] WASHER  
19. 0S-1594 [4] BOLT  
20. 9M-5382 [1] LEVER  
21. 7D-7323 [1] ROD ASSEM.  
22. 7D-7598 [2] END  
23. 9M-5380 [2] BRACKET ASSEM.  
24. 4D-2619 [1] BEARING  
25. 3D-9891 [1] LEVER  
26. 1B-4669 [1] COLLAR  
27. 4B-3573 [1] SCREW  
28. 7D-7314 [1] SHAFT  
 

#SEBP10010058
 

7D-3520: GOVERNOR CONTROL

GOVERNOR CONTROL (7D3520 N/S)--Part 2 of 2
c168354 SEBP1001
7D3520 GOVERNOR CONTROL Parts scheme
  For full view, you need register

Parts for your 772 TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-1915 [1] BOLT  
2. 1D-4717 [17] NUT  
3. 1B-8704 [7] KEY  
4. 7D-7318 [1] LEVER  
5. 0S-1591 [13] BOLT  
6. 3B-4506 [9] LOCKWASHER  
7. 4D-4064 [3] END  
8. 7D-7324 C [1] ROD  
9. 5B-9079 [4] NUT  
10. 4D-4866 [1] LEVER  
11. 0S-1585 [2] BOLT  
  3B-4508 [2] LOCKWASHER  
12. 4B-4281 [1] WASHER  
13. 7D-3438 [1] SHAFT  
14. 5H-6933 [4] LEVER  
15. 9M-5382 [1] LEVER  
16. 4D-9466 [1] LEVER  
17. 6D-0475 [1] LINK ASSEM.  
18. 8D-7709 C [1] STUD  
19. 1A-8285 [1] NUT  
20. 7H-3641 [1] END  
21. 1B-7182 [1] BOLT  
  1D-4716 [1] NUT  
  3B-4505 [1] LOCKWASHER  
22. 5H-6862 [1] LEVER  
23. 9F-7022 [1] BOLT  
  1B-4330 [1] NUT  
24. 0L-1351 [2] BOLT  
25. 7D-7598 [2] END  
26. 4L-7551 [1] ROD  
27. 5D-2737 [1] PEDAL  
28. 9M-5205 [1] PIN  
  3B-4607 [1] COTTER PIN  
29. 5D-2738 [1] BRACKET  
30. 7D-8120 [1] BRACKET ASSEM.  
31. 4D-2619 [2] BEARING  
32. 1B-8701 [1] KEY  
33. 7D-5179 [1] ROD ASSEM.  
34. 4D-4064 [2] END  
35. 5B-9079 [2] NUT  
  C   INDICATES CHANGE
 

#SEBP10010059
 

1P-7899: LINES GP-FUEL INJECTION

1P7899 FUEL INJECTION VALVES AND LINES GROUP--Part 1 of 2
Serial No. 11S1 to 11S173 inclusive
c221123 SEBP1001
1P7899 LINES GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 772 TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2S-4505 [1] LINE ASSEM. (No. 1)  
2. 0S-1588 [4] BOLT  
3. 3B-4506 [14] LOCKWASHER  
4. 4S-7797 [2] BOLT  
5. 3B-4508 [9] LOCKWASHER  
6. 0S-1591 [6] BOLT  
7. 4B-4278 [6] WASHER  
8. 8S-8819 [2] CLIP  
9. 8S-8817 [12] DAMPER  
10. 2S-4507 [1] LINE ASSEM. (No. 3)  
11. 2S-4509 [1] LINE ASSEM. (No. 5)  
12. 8S-8815 [2] CLAMP  
  8S-8814 [2] CLAMP  
13. 0S-1615 [2] BOLT  
  3B-4504 [2] LOCKWASHER  
14. 1A-0168 [1] BOLT  
15. 4N-4002 [1] TUBE ASSEM.  
  6L-3616 [1] CONNECTOR  
16. 5K-9243 [1] FITTING  
17. 8S-8820 [5] CLIP  
18. 2S-4511 [1] LINE ASSEM. (No. 7)  
19. 6H-1995 [1] SEAL  
20. 9S-1350 [1] CLIP  
21. 2N-3194 [1] BRACKET  
22. 0S-1595 [4] BOLT  
23. 0S-1594 [1] BOLT 1 in. (2.5 cm) long  
24. 8S-8816 [2] BRACKET  
25. 2P-9574 [1] LINE ASSEM. (No. 8)  
26. 2S-4510 [1] LINE ASSEM. (No. 6)  
27. 2S-4508 [1] LINE ASSEM. (No. 4)  
28. 8S-0205 [2] BRACKET  
29. 1B-3573 [2] BOLT  
30. 2S-4506 [1] LINE ASSEM. (No. 2)  
31. 7M-2065 [8] ADAPTER ASSEM.  
32. 5M-1868 [8] SEAL  
33. 2S-4513 [8] LINE ASSEM.  
34. 2B-2695 [8] BOLT  
  2A-5328 [8] LOCK  
35. 6N-6151 C [8] NUT  
36. 6N-6150 C [8] BODY  
37. 7N-5005 C [8] NOZZLE ASSEM.  
38. 5K-9238 [4] FITTING  
39. 7H-3270 [1] GASKET  
40. 8S-9191 [1] BOLT 4 in. (10.1 cm) long  
41. 1P-7860 [1] TUBE ASSEM.  
42. 1P-7865 [1] TUBE ASSEM.  
43. 1P-7863 [1] TUBE ASSEM.  
44. 6L-3616 [1] FITTING  
45. 1A-4784 [1] WASHER  
46. 1H-1023 C [16] SEAL  
47. 1H-8171 C [8] SEAL  
  C   INDICATES CHANGE
 

Information:

Truck Engine News
Policy on Testing of Fuel Injectors and Fuel Nozzles {1251}
2008/11/01
Do Not Use the 6V-4022 Fuel Injector Tester to Measure Unit Injector Fuel Flow Rate {0782, 1251, 1254, 1290, 1713}
2008/11/01
Engine News
Policy on Testing of Fuel Injectors and Fuel Nozzles {1251}
2008/11/17
The Pop (Injector) Tester Is not Available for Fuel Injectors {0782, 1251, 1254, 1290, 1713}
2008/11/17
Special Instruction
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Service Letter-NACD
Certain 2S7264 And 3S1467 Fuel Injection Pump Assemblies Need To Be Removed From Parts Stock
Certain 2S7264 And 3S1467 Fuel Injection Pump Assemblies Need To Be Removed From Parts Stock
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Service Letter-Truck/Ag/Marine
Specifications
Fuel Injection Pump
5.4" BORE, 60ø V8 VEHICULAR ENGINE
Governor<BR> (8S6420)
5.4" BORE, 60ø V8 VEHICULAR ENGINE
Governor<BR> (1N7154)
5.4" BORE, 60ø V8 VEHICULAR ENGINE
Governor<BR> (1N7998)
5.4" BORE, 60ø V8 VEHICULAR ENGINE
Governor<BR> (4N3991)
5.4" BORE, 60ø V8 VEHICULAR ENGINE
Governor<BR> (4N3660)
5.4" BORE, 60ø V8 VEHICULAR ENGINE
Fuel Transfer Pump<BR> (8S199)
5.4" BORE, 60ø V8 VEHICULAR ENGINE
Variable Drive For The Fuel Injection Pump Camshaft<BR> (4N6680)
5.4" BORE, 60ø V8 VEHICULAR ENGINE
Variable Drive For The Fuel Injection Pump Camshaft<BR> (4S9498)
5.4" BORE, 60ø V8 VEHICULAR ENGINE
Tool Operating Manual
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the TMI System to Retrieve Off Engine Injection Pump Test Specifications for the Fuel Injection Equipment Test Stand{0706, 0782, 1251, 1286}
Using the TMI System to Retrieve Off Engine Injection Pump Test Specifications for the Fuel Injection Equipment Test Stand{0706, 0782, 1251, 1286}
Testing and Adjusting Fuel Injection Pump and Governor on 3064 and 3066 Engines{0374, 0599, 0706}
Testing and Adjusting Fuel Injection Pump and Governor on 3064 and 3066 Engines{0374, 0599, 0706}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}
169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}
Service Letter-China
Certain 2S7264 And 3S1467 Fuel Injection Pump Assemblies Need To Be Removed From Parts Stock
Certain 2S7264 And 3S1467 Fuel Injection Pump Assemblies Need To Be Removed From Parts Stock
Service Letter-Asia
Reuse And Salvage Guidelines
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
Information Release Memo
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Service Letter-APD
Certain 2S7264 And 3S1467 Fuel Injection Pump Assemblies Need To Be Removed From Parts Stock
Certain 2S7264 And 3S1467 Fuel Injection Pump Assemblies Need To Be Removed From Parts Stock
Disassembly and Assembly
Governor
772 TRACTOR & 773 TRUCK ENGINE
Governor
772 TRACTOR & 773 TRUCK ENGINE
Variable Timing Unit
772 TRACTOR & 773 TRUCK ENGINE
Fuel Injection Pump Housing
772 TRACTOR & 773 TRUCK ENGINE
Fuel Injection Valves
772 TRACTOR & 773 TRUCK ENGINE
Fuel Transfer Pump
772 TRACTOR & 773 TRUCK ENGINE
Service Magazine
New Part Available To Check The 3S1467 Plunger And Barrel Assemblies{1251,1252,0652}
1980/05/12
New Plug With Straight-Threads Used In Engine Variable Timing Drive{1272}
1980/05/19
6V3129 Nozzle Puller Group And FT1533 Nozzle Assembly Adapter Can Be Used To Remove Fuel Nozzles{0621,1254}
1981/02/02
Improvements To Optional Modification Of 5P4150 Nozzle Tester{0651,1254}
1981/08/17
New 6V4950 Injection Line Speed Pickup Group Used With 6V2100 Multitach{0651}
1982/05/03
Do Not Use A Wire Brush On Fuel Nozzles{1254}
1982/09/27
New Fuel Nozzle Test Sheet Available{0651,1254}
1982/10/04
Bulged Capsule-Type Fuel Nozzles{1254}
1982/10/11
Service Parts Available For The 5P4150 Nozzle Testing Group{0651,0652}
1982/11/22
New Governor Drive Gears And Weight Assemblies{1264}
1983/08/22
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint{1264}
1983/11/07
Valve Lash Adjustment Not A Warranty Item {1102,1105}
1985/01/14
Comparison Of Fuel Timing Tolerances For Field Settings{1250,1251,1281}
1985/10/28
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing{1253}
1986/03/10
Bleed Screw Washer (Seal) Must Be Replaced If Bleed Screw Removed From Fuel Nozzle{1254}
1986/04/07
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers{1257,1264}
1986/06/09
Update Information For Caterpillar Fuel Injection Equipment Test Stand{0782}
1986/06/16
Changes Have Been Made To OT Microfiche (Fuel Setting And Related Information){1250,1251,1281}
1986/06/16
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22
Nylon Seals Used On Lockwire To Seal Critical Areas; All Subsidiary Dealers Can Now Order Parts Service Seals {1257,1264}
1986/11/03
New Tie Bars Improve Stability Of The Fuel Injection Test Bench{0652}
1977/01/17
Test Used Fuel Nozzles Before You Install New Nozzles; Tips On Test Procedures{1254,0651,0336}
1977/02/14
New Adapter Group For Use With Fuel Injection Test Bench{0652}
1977/06/13
With New 5P7448 Adapter, Earlier Fuel Injection Valves And Nozzles Can Be Tested And Adjusted On The 5P4150 Nozzle Testing Group{0651,1254}
1977/10/31
Improved Gasket Prevents Oil Leakage From The Governor{1264}
1978/01/16
Probable Causes Of Low Fuel Delivery During Testing On Fuel Injection Test Benches{0650,1250}
1978/02/06
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
Modification Of Drive Adapter For Fuel Injection Test Bench{0650,1272}
1978/05/22
New Drive Adapters For Fuel Injection Test Bench{0650}
1978/09/11
Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25
Adjustment Procedures And Lubrication Recommendations For Drive Pulleys On Caterpillar Fuel Injection Test Bench{0652}
1978/09/25
Caterpillar Fuel Injection Test Bench Book{0374}
1978/10/16
New FT2253 Cable Assembly Drawing Available For Kent-Moore Fuel Injection Test Bench{0782}
1988/01/04
Some Components Of The Variable Pulley And Adjustable Pulley On The Kent-Moore Fuel Injection Test Bench Are Available From Caterpillar{0782}
1988/04/18
Careful, Correct Installation And Maintenance Of Fuel Injection Lines Is Very Important To Prevent Possible Engine Damage, Fire And Other Problems{1252}
1979/04/23
9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28
Fuel Injection Line For Injection Test Bench Is Available From Caterpillar{0652,1250}
1979/07/02
Changes Made To 8S2243 And 8S4613 Wrenches Used On Fuel Injection Pumps{0612,1251}
1979/08/06
General Information -- Diesel Fuels In Cold Temperature Operation{1280}
1979/12/17
Do Not Reuse the Hold Down Bolts for the Fuel Injectors On All Products that Contain C9 Through C32 Engines {1290}
2014/08/14
Policy on Testing of Fuel Injectors and Fuel Nozzles {1251}
2008/11/17
Do Not Use the 6V-4022 Fuel Injector Tester to Measure Unit Injector Fuel Flow Rate {1251, 1254, 1290, 1713}
2008/11/17
The Pop (Injector) Tester Is not Available for Fuel Injectors {0782, 1251, 1254, 1290, 1713}
2008/11/17
Do not Use the 6V-4022 Fuel Injector Tester to Test Unit Injectors {0782, 1251, 1254, 1290, 1713}
2008/12/01

Caterpillar Parts SIS Catalog 772 :

4N-3660 GOVERNOR GP
4N-3660 GOVERNOR GP
GOVERNOR GP
4N-3660 GOVERNOR GP
4N-3660 GOVERNOR GP
4N-3660 GOVERNOR GP
GOVERNOR GP
4N-3660 GOVERNOR GP
PUMP-DRIVE & GOVERNOR GP
8S-6460 PUMP-DRIVE & GOVERNOR GP
2P-8917 GEAR GP-IDLER
4N-6714 FUEL INJECTION PUMP GROUP
DRIVE AS-VARIABLE TIMING
4N-6680 DRIVE AS-VARIABLE TIMING
SPRING GP-GOVERNOR TORQUE
4N-4359 SPRING GP-GOVERNOR TORQUE
SPRING GP-GOVERNOR TORQUE
4N-4359 SPRING GP-GOVERNOR TORQUE
CONTROL GP-FUEL RATIO
2P-8708 CONTROL GP-FUEL RATIO
CONTROL GP-FUEL RATIO
2P-8708 CONTROL GP-FUEL RATIO
GOVERNOR CONTROL
7D-3520 GOVERNOR CONTROL
7D-3520 GOVERNOR CONTROL

Truck sale:

Caterpillar 772, Off Highway Trucks, Construction
334,071 
Caterpillar 772, Off Highway Trucks, Construction
- Off Highway Trucks
FINNING CANADA
Caterpillar 772, Off Highway Trucks, Construction
334,071 
Caterpillar 772, Off Highway Trucks, Construction
- Off Highway Trucks
FINNING CANADA
Caterpillar 772, Off Highway Trucks, Construction
334,071 
Caterpillar 772, Off Highway Trucks, Construction
- Off Highway Trucks
FINNING CANADA
Caterpillar 772G, Off Highway Trucks, Construction
 
Caterpillar 772G, Off Highway Trucks, Construction
- Off Highway Trucks
ZEPPELIN BAUMASCHINEN
Caterpillar 772G, Off Highway Trucks, Construction
210,000 
Caterpillar 772G, Off Highway Trucks, Construction
- Off Highway Trucks
HOLT CAT
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.