6P9172 ROLL-OVER PROTECTIVE STRUCTURE MOUNTING GROUP Serial No. 97V193-Up Also part of 6P9018 Roll-over Protective System Arrangement listed on Page 178 D9H

OPERATOR STATION

ROPS/FOPS GP

0. 6P-9172 ROLL-OVER
1. 3P-5110 MOUNTING G
2. 3P-5110 MOUNTING G

ELECTRICAL AND STARTING SYSTEM

WARNING GP

3. 8P-7304 BACK-UP WA

WIRING GP

4. 8P-7314 HARNESS AS
5. 4S-6937 CAB WIRING

SERVICE EQUIPMENT AND SUPPLIES

GASKET & SEAL KITS

6. GASKET KIT

BOX GP-TOOL

7. 1P-1037 TOOL BOX G

TOOLS

8. 9S-7977 TOOL GP-HA

CHARTS & FILMS

9. NAME PLATE
0. INFORMATION

TRACK-TYPE TRACTOR D9H TRACK-TYPE TRACTOR 97V
DUAL D9H TRACTOR 97V00001-UP (MACHINE) SEBP1002 D9H 97V (1975)

OPERATOR STATION

ROPS/FOPS GP

3P-2008 ROLL-OVER PROTECTIVE STRUCTURE GROUP

6P-9172 ROLL-OVER PROTECTIVE STRUCTURE MOUNTING GROUP

3P-5110 MOUNTING GP-ROPS

#SEBP10020280

6P-9172: ROLL-OVER PROTECTIVE STRUCTURE MOUNTING GROUP

ROLL-OVER PROTECTIVE STRUCTURE MOUNTING GROUP

6P9172 ROLL-OVER PROTECTIVE STRUCTURE MOUNTING GROUP
Serial No. 97V193-Up
Also part of 6P9018 Roll-over Protective System Arrangement listed on Page 178

c158800 SEBP1002

6P9172 ROLL-OVER PROTECTIVE STRUCTURE MOUNTING GROUP Parts scheme

For full view, you need register

Parts for your D9H TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	6P-9508	[4]	STRIP
2.	3N-1614	[16]	BOLT
3.	9S-2961	[8]	SPACER
4.	6P-9150	[2]	SPACER ASSEM.
5.	2B-7218	[2]	BOLT
6.	6K-3632	[4]	LOCKNUT
	4B-4285	[8]	WASHER
	8P-3729 C	[8]	BUSHING
7.	8S-8782	[4]	GRAB IRON
8.	0S-1621	[8]	BOLT
	3B-4508	[8]	LOCKWASHER
9.	5B-5473	[2]	BOLT
10.	6P-9152	[1]	SPACER ASSEM. (R.H.)
	6P-9151	[1]	SPACER ASSEM. (L.H.)
11.	3S-1349	[8]	WASHER
	C		INDICATES CHANGE

#SEBP10020281

3P-5110: MOUNTING GP-ROPS

MOUNTING GP-ROPS

3P5110 ROLL-OVER PROTECTIVE STRUCTURE MOUNTING GROUP
Serial No. 97V1 to 97V192 inclusive and 98V1 to 98V192 inclusive
Also part of 6P9018 Roll-over Protective System Arrangement listed on Page 178. AN ATTACHMENT

c204692 SEBP1002

For full view, you need register

Parts for your D9H TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	6P-1703	[1]	GRAB IRON ASSEM. (R.H.)
	6P-1705	[1]	GRAB IRON ASSEM. (L.H.)
2.	7B-3235	[4]	BOLT
3.	2M-0849	[6]	WASHER
4.	6P-5290	[1]	PLATE ASSEM. (R.H.)
	6P-5288	[1]	PLATE ASSEM. (L.H.)
5.	0S-1591	[1]	BOLT
6.	3B-4506	[2]	LOCKWASHER
7.	6P-0150	[1]	GUARD ASSEM.
8.	0L-1351	[1]	BOLT
9.	1A-0458	[6]	BOLT
10.	2S-0115	[14]	WASHER
11.	2P-8962	[2]	SUPPORT ASSEM.
12.	1D-4637	[16]	BOLT
13.	3K-5234	[28]	WASHER
14.	1D-4642	[6]	BOLT
	2J-3507	[6]	NUT
15.	6P-0532	[2]	DOOR
16.	1K-1038	[2]	BAR
17.	0S-0509	[6]	BOLT
18.	6P-8101	[1]	DOOR ASSEM.
19.	1F-5448	[2]	BLOCK
20.	1A-8063	[4]	BOLT
	2J-3506	[4]	NUT
	9S-3753	[4]	SHIM .06 in. (1.52 mm) thick
	9S-3754	[4]	SHIM .036 in. (.91 mm) thick
21.	6P-0530	[8]	SHIM
22.	0S-1595	[2]	BOLT
23.	0S-1592	[12]	BOLT
	4D-3704	[12]	WASHER
24.	6P-5293	[1]	SUPPORT ASSEM.

#SEBP10020282

3P-5110: MOUNTING GP-ROPS

MOUNTING GP-ROPS

3P5110 ROLL-OVER PROTECTIVE STRUCTURE MOUNTING GROUP
Serial No. 97V193-Up and 98V193-Up

c211482 SEBP1002

For full view, you need register

Parts for your D9H TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	6P-1703	[1]	GRAB IRON ASSEM. (R.H.)
	6P-1705 C	[1]	GRAB IRON ASSEM. (L.H.)
2.	7B-3235	[4]	BOLT
3.	2M-0849	[6]	WASHER
4.	6P-5290	[1]	PLATE ASSEM. (R.H.)
	6P-5288 C	[1]	PLATE ASSEM. (L.H.)
5.	6P-5293	[1]	SUPPORT ASSEM.
6.	0S-1592	[12]	BOLT
	4D-3704	[12]	WASHER
7.	0S-1595	[2]	BOLT
8.	6P-0530	[8]	SHIM
9.	1A-0458	[6]	BOLT
10.	2S-0115	[14]	WASHER
11.	2P-8962	[2]	SUPPORT ASSEM.
12.	1D-4637	[16]	BOLT
13.	3K-5234	[28]	WASHER
14.	1D-4642	[6]	BOLT
	2J-3507	[6]	NUT
15.	6P-0532	[2]	DOOR
16.	1K-1038	[2]	BAR
17.	0S-0509 C	[8]	BOLT
18.	6P-8101	[1]	DOOR ASSEM.
19.	1F-5448	[2]	BLOCK
20.	1A-8063	[4]	BOLT
	2J-3506	[4]	NUT
	9S-3753	[4]	SHIM 1.52 mm(06 in.) thick
	9S-3754	[4]	SHIM .91 mm(.036 in.) thick
	C		INDICATES CHANGE

#SEBP10020283

8P-7304: BACK-UP WARNING GROUP

BACK-UP WARNING GROUP

8P7304 BACK-UP WARNING GROUP
Serial No. 98V1-Up
8P7314 Harness parts are shown on Page 182

c209628 SEBP1002

8P7304 BACK-UP WARNING GROUP Parts scheme

For full view, you need register

Parts for your D9H TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	6P-8576	[1]	BACK-UP ALARM
			(Includes)
2.	5P-6725	[2]	CONNECTOR ASSEM.
3.	8S-9191	[2]	BOLT
4.	1D-4717	[4]	NUT
	3B-4506	[4]	LOCKWASHER
	4B-4278	[4]	WASHER
5.	1H-5166	[1]	CLIP
6.	3B-1915	[2]	BOLT
7.	8P-4028	[1]	BRACKET
8.	8P-7314 Y	[1]	HARNESS ASSEM.
			(Separate Illustration)
9.	3P-8989	[1]	FUSE (2 AMP)
10.	6P-3896	[1]	WIRE ASSEM.
			(Includes)
	5P-5628 H		TUBE .737 m(29 in.)
	5P-5624 H		WIRE .762 m(30 in.)
11.	2L-8078	[1]	TERMINAL
12.	2S-5012	[1]	CAP
	2S-5014	[1]	CONTACT
13.	4D-4785	[1]	SWITCH (reverse)
14.	3B-6768	[1]	BUSHING
15.	004-5933	[1]	TEE
	H		ORDER BY THE METRE
	Y		SEPARATE ILLUSTRATION

#SEBP10020284

8P-7314: HARNESS ASSEMBLY

HARNESS ASSEMBLY

8P7314 HARNESS ASSEMBLY
Serial No. 98V1-Up
Part of 8P7304 Back-Up Warning Group shown on Page 181

c209629 SEBP1002

For full view, you need register

Parts for your D9H TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	2L-8079	[1]	TERMINAL
2.	2S-5014	[1]	CONTACT
	2S-5013	[1]	SPRING
3.	2S-5011	[1]	BODY
4.	2L-8075	[2]	TERMINAL
			THE FOLLOWING WIRE IS AVAILABLE:
	5P-5624 H		WIRE (14 gauge)
	H		ORDER BY THE METRE

#SEBP10020285

4S-6937: CAB WIRING GROUP

CAB WIRING GROUP

4S6937 CAB WIRING GROUP
Serial No. 97V193-Up. Part of 8P86 Roll-over Group
shown on Pages 178C and 178F. AN ATTACHMENT

c119276 SEBP1002

For full view, you need register

Parts for your D9H TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.		[1]	WIRE ASSEM.
	H		WIRE (12 gauge) 36.00 in.
2.		[1]	INSULATOR
3.		[1]	CONNECTOR
4.		[1]	TERMINAL
5.		[3]	INSULATOR
6.	C	[2]	SCREW (use without weld nuts)
7.		[1]	FUSE
		[1]	FUSE HOLDER
8.		[2]	GROMMET
9.		[1]	WIRE ASSEM.
	H		WIRE (12 gauge) 5.00 in.
10.		[1]	TERMINAL
11.		[1]	TERMINAL
12.		[2]	BOLT
		[2]	LOCKWASHER
13.		[2]	CLIP
	J	[1]	WIRE ASSEM. (ground)
	HJ		WIRE (6 gauge) 26.00 in.
	J	[2]	TERMINAL
	C		INDICATES CHANGE
	J		NOT SHOWN
	H		ORDER BY THE FOOT

#SEBP10020286

GASKET KITS

SEBP10020286 SEBP1002

For full view, you need register

Parts for your D9H TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name	Comments
	5P-4687		TRANSMISSION OVERHAUL
	5P-4686		TORQUE CONVERTER
	5P-4685		TRANSMISSION OIL SYSTEM

#SEBP10020287

1P-1037: TOOL BOX GP

TOOL BOX GP

1P1037 TOOL BOX GROUP

c131770 SEBP1002

For full view, you need register

Parts for your D9H TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3B-3427	[ 1]	TOOL BOX ASSEM.
2.	0L-1351	[ 4]	BOLT
	4B-5271	[ 4]	WASHER
3.	3B-4506	[ 8]	LOCKWASHER
4.	1P-1480	[ 2]	SUPPORT ASSEM.
	9F-2978	[ 4]	NUT (Weld)
			(2 in each 1P1480 Assem.)
5.	0S-1594	[ 4]	BOLT

#SEBP10020288

9S-7977: TOOL GP-HAND

TOOL GP-HAND

9S7977 HAND TOOL GROUP
Serial No. 97V1-Up. AN ATTACHMENT

c201200 SEBP1002

For full view, you need register

Parts for your D9H TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name	Comments
	8F-9866 Y		GREASE GUN (Lever)
			(See Separate Illustration)
	9S-1738		SCREWDRIVER NO. 2 PHILLIPS
	1F-1157		SCREWDRIVER
	5S-9567		EXTENSION
	5S-9566		WRENCH
	2P-8250		STRAP WRENCH ASSEM.
	8H-8581		GAUGE (Feeler)
	5F-4764		PRY BAR
	5S-9568		SOCKET
	5S-9569		SOCKET
	5P-1763 C		SOCKET
	8H-8503		WRENCH (5/16" Opening)
	8H-8505		WRENCH (3/8" Opening)
	8H-8513		WRENCH (7/8" Opening)
	8H-8508		WRENCH (9/16" Opening)
	8H-8509		WRENCH (5/8" Opening)
	8H-8511		WRENCH (3/4" Opening)
	8H-8515		WRENCH (1" Opening)
	8H-8549		SOCKET (9/16" Opening)
	8H-8554		SOCKET ( 7/8" Opening)
	8H-8555		SOCKET (15/16" Opening)
	8H-8556		SOCKET ( 1" Opening)
	9S-1730		SOCKET (11/8" Opening)
	C		INDICATES CHANGE
	Y		SEPARATE ILLUSTRATION

#SEBP10020289

NAME PLATES AND TRANSFERS

c999999 SEBP1002

For full view, you need register

Parts for your D9H TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
47.	8T-4183 M	[10]	BOLT (M12X1.75X40MM)
48.	8T-4194 M	[20]	BOLT (M12X1.75X50MM)
49.	1P-5767	[22]	FLANGE-HALF
50.	4Q-0707	[2]	CONNECTOR-QUICK
51.	4Q-0579	[2]	CAP-QUICK
52.	107-3636	[2]	CONNECTOR
53.	107-3637	[2]	SEAL
54.	005-6985	[2]	NIPPLE AS
55.	132-7100	[2]	CAP-DUST
56.	6V-8634	[2]	CONNECTOR-O-RING
57.	127-6816	[2]	PLATE
58.	142-0473	[2]	HOSE AS
59.	6V-8398	[4]	SEAL-O-RING (16.03MM OD)
60.	132-9172	[2]	PLATE
61.	6V-8995	[2]	UNION-BULKHEAD (13/16-16 THD)
62.	6V-9169	[2]	NUT-BULKHEAD (11/16-16 THD)
63.	142-0472	[2]	HOSE AS
64.	178-4943	[1]	HOSE AS
65.	178-4942	[2]	HOSE AS
66.	131-4063	[1]	TUBE AS
67.	131-4064	[1]	TUBE AS
68.	132-9174	[2]	HOSE AS
69.	143-4294	[2]	HOSE AS
70.	137-1594	[7]	VALVE AS-BALL
71.	7X-2543 M	[14]	BOLT (M10X1.5X120MM)
72.	9S-4191	[7]	PLUG-O-RING (9/16-18 THD)
73.	8T-4184 M	[28]	BOLT (M12X1.75X45MM)
74.	141-8032	[1]	PLATE
75.	113-2004 M	[4]	BOLT-HEX (M12X1.75X45MM)
76.	5K-9090	[3]	SEAL-O-RING (23.52MM ID)
77.	8T-4244	[2]	NUT (M12X1.75 THD)
78.	130-9862	[1]	BRACKET
79.	6V-8998	[1]	UNION-O-RING (1-7/16-12 THD)
80.	6V-9172	[1]	NUT-BULKHEAD (1-7/16 - 12 THD)
81.	6V-8994	[2]	UNION-BULKHEAD (11/16-16 THD)
82.	6V-9168	[2]	NUT (11/16-16 THD)
83.	7Y-4199	[2]	HOSE AS
	I		SEE HOSE FABRICATION GUIDE
	M		METRIC PART