AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

7N1497 CYLINDER BLOCK ASSEMBLY Part of 7N3044 & 7N4013 Cylinder Block Groups shown on Pages 19A & 19B D9H


BASIC ENGINE
CYLINDER BLOCK GP
CYLINDER HEAD GP
CYLINDER BLOCK GP
CRANKSHAFT GP
PISTON & ROD GP

TRACK-TYPE TRACTOR D9H TRACK-TYPE TRACTOR 12U
 D353 VEHICULAR ENGINE 12U00001-UP (MACHINE) SEBP1004 D9H 12U   (1974)

BASIC ENGINE

CYLINDER BLOCK GP
CYLINDER BLOCK GP
7N-3044 CYLINDER BLOCK GP
7N-4013 CYLINDER BLOCK GP
CYLINDER BLOCK AS
7N-1497 CYLINDER BLOCK AS
COVER GP-CYLINDER BLOCK
6N-1577 COVER GP-CYLINDER BLOCK
COVER GP-CYLINDER BLOCK
6N-1577 COVER GP-CYLINDER BLOCK
CYLINDER BLOCK COVER GROUP
6N-2302 CYLINDER BLOCK COVER GROUP
 

#SEBP10040020
 

7N-1497: CYLINDER BLOCK AS

7N1497 CYLINDER BLOCK ASSEMBLY
Part of 7N3044 & 7N4013 Cylinder Block Groups shown on Pages 19A & 19B
c213377 SEBP1004
7N1497 CYLINDER BLOCK AS Parts scheme
  For full view, you need register

Parts for your D9H TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9F-2247 [ 1] PLUG  
2. 2H-7878 [ 1] BUSHING  
3. 5M-6214 [ 4] PLUG  
4. 2H-2330 [ 6] BEARING  
5. 5H-2213 [ 1] TUBE  
6. 1S-9540 [ 2] DOWEL  
7. 1A-2610 [ 4] DOWEL  
8. 7H-3171 [ 1] PLUG  
9. 5H-2214 [ 1] TUBE  
10. 5M-6213 [ 1] PLUG  
11. 0L-2288 [ 1] PLUG  
12. 3J-5390 [ 1] PLUG  
13. 5H-2212 [ 1] TUBE  
14. 1H-0974 [ 1] DOWEL  
15. 1B-5170 [ 1] PLUG  
16. 1P-4298 [ 1] CAP (front)  
17. 3H-3130 [ 2] DOWEL  
18. 0S-1621 [ 2] BOLT  
  2B-1738 [ 2] LOCK  
19. 5H-1029 [ 1] TUBE ASSEM.  
20. 8F-6575 [ 1] PLUG  
21. 1P-0668 [ 14] STUD  
  1A-1935 [ 14] NUT  
22. 1P-4322 [ 2] CAP (center & rear)  
23. 0T-0398 [ 4] STUD  
24. 2H-2329 [ 3] BEARING  
25. 1P-4337 [ 4] CAP  
26. 4B-8945 [ 2] DOWEL  
27. 5B-5812 [ 1] DOWEL  
28. 7B-2335 [ 3] STUD  
 

#SEBP10040021
 

7N-3630: CYL HEAD A

7N3630 CYLINDER HEAD ASSEMBLY--Field Installation
Serial No. 97U3284 to 97U7921 inclusive
Part of 7N4013 Cylinder Block Group shown on Page 19B
c217805 SEBP1004
7N3630 CYL HEAD A Parts scheme
  For full view, you need register

Parts for your D9H TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5S-1757 [3] INSERT (intake)  
2. 4N-3664 [3] GUIDE (intake)  
3. 3B-0645 [12] PLUG  
4. 6N-8847 [3] GUIDE (exhaust)  
5. 8M-4014 [3] INSERT (exhaust)  
6. 5H-7071 [12] DIRECTOR  
 

#SEBP10040022
 

6N-1577: COVER GP-CYLINDER BLOCK

6N1577 CYLINDER BLOCK COVER GROUP
Serial No. 97U3095, 97U3103 & 97U3284 to 97U7512 inclusive
c204905 SEBP1004
6N1577 COVER GP-CYLINDER BLOCK Parts scheme
  For full view, you need register

Parts for your D9H TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0L-1351 [31] BOLT  
2. 6N-1238 [1] COVER  
3. 5H-1032 [1] GASKET  
4. 2M-8361 [1] COVER  
5. 3H-2319 [1] GASKET  
6. 3H-2301 [1] GASKET  
7. 7B-3235 [2] BOLT  
  2M-0849 [2] WASHER  
8. 2M-6604 [1] COVER  
  5H-4263 [1] GASKET  
9. 3B-1915 [1] BOLT  
10. 0S-1590 [3] BOLT  
11. 5M-2894 [53] WASHER  
12. 1B-4203 [4] NUT  
13. 5H-4181 [2] GASKET  
14. 0S-1594 [42] BOLT  
15. 0S-1588 [1] BOLT  
16. 5H-4179 [1] COVER ASSEM.  
    (Includes)
17. 5M-9621 [4] STUD  
18. 0S-1591 [3] BOLT (location A)  
19. 5H-4180 [1] COVER  
20. 3J-5389 [1] PLUG  
 

#SEBP10040023
 

6N-1577: COVER GP-CYLINDER BLOCK

6N1577 CYLINDER BLOCK COVER GROUP
Serial No. 97U7513-Up
c165122 SEBP1004
6N1577 COVER GP-CYLINDER BLOCK Parts scheme
  For full view, you need register

Parts for your D9H TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1B-4203 [ 4] NUT  
2. 5M-2894 [ 50] WASHER  
3. 6L-5490 C [ 2] GASKET  
4. 7B-3235 [ 2] BOLT  
  2M-0849 [ 2] WASHER  
5. 2M-6604 [ 2] COVER  
  5H-4263 [ 1] GASKET  
6. 0S-1594 C [ 43] BOLT  
7. 0S-1588 [ 1] BOLT  
8. 5H-4179 [ 1] COVER ASSEM.  
    (Includes)
9. 5M-9621 [ 4] STUD  
10. 5H-4180 [ 1] COVER  
11. 0S-1591 [ 2] BOLT (location A)  
    INDICATES CHANGE
 

#SEBP10040024
 

6N-2302: CYLINDER BLOCK COVER GROUP

6N2302 CYLINDER BLOCK COVER GROUP
Serial No. 97U3095, 97U3103 & 97U3284 to 97U7512 inclusive
c204901 SEBP1004
6N2302 CYLINDER BLOCK COVER GROUP Parts scheme
  For full view, you need register

Parts for your D9H TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0L-1351 [31] BOLT  
2. 6N-1238 [1] COVER  
3. 5H-1032 [1] GASKET  
4. 2M-8361 [1] COVER  
5. 3H-2319 [1] GASKET  
6. 3H-2301 [1] GASKET  
7. 7B-3235 [2] BOLT  
  2M-0849 [2] WASHER  
8. 2M-6604 [1] COVER  
  5H-4263 [1] GASKET  
9. 3B-1915 [1] BOLT  
10. 0S-1590 [3] BOLT  
11. 5M-2894 [53] WASHER  
12. 1B-4203 [4] NUT  
13. 5H-4181 [2] GASKET  
14. 0S-1594 [42] BOLT  
15. 0S-1588 [1] BOLT  
16. 5H-4179 [1] COVER ASSEM.  
    (Includes)
17. 5M-9621 [4] STUD  
18. 0S-1591 [3] BOLT (location A)  
19. 2P-7786 [1] COVER ASSEM.  
 

#SEBP10040025
 

6N-2302: CYLINDER BLOCK COVER GROUP

6N2302 CYLINDER BLOCK COVER GROUP
Serial No. 97U7513-Up
c215233 SEBP1004
6N2302 CYLINDER BLOCK COVER GROUP Parts scheme
  For full view, you need register

Parts for your D9H TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1B-4203 [4] NUT  
2. 5M-2894 C [50] WASHER  
3. 5H-4181 [2] GASKET  
4. 7B-3235 [2] BOLT  
  2M-0849 [2] WASHER  
5. 2M-6604 [2] COVER  
  5H-4263 [1] GASKET  
6. 0S-1594 [42] BOLT  
7. 0S-1588 [1] BOLT  
8. 5H-4179 [1] COVER ASSEM.  
    (Includes)
9. 5M-9621 [4] STUD  
10. 2P-7786 [1] COVER ASSEM.  
11. 0S-1591 [3] BOLT (location A)  
  C   INDICATES CHANGE
 

#SEBP10040026
 

6N-2090: CRANKSHAFT GP

6N2090 CRANKSHAFT GROUP
c221994 SEBP1004
6N2090 CRANKSHAFT GP Parts scheme
  For full view, you need register

Parts for your D9H TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7S-0662 [1] RING  
2. 1S-8607 [1] BAFFLE  
  5H-2669 [1] GASKET  
3. 0S-1594 [12] BOLT  
  7H-3070 [6] LOCK  
4. 2S-2430 [1] THROWER  
5. 1N-4331 [1] BEARING REAR  
6. 1N-4317 [4] BEARING INTERMEDIATE  
7. 2P-2800 R [1] CRANKSHAFT  
8. 1N-4318 [1] BEARING CENTER  
9. 1N-4316 [1] BEARING FRONT  
10. 6H-5843 [1] THROWER  
11. 7N-9679 C [1] RING  
  C   INDICATES CHANGE
  R   REMFG PART MAY BE AVAILABLE
 

#SEBP10040027
 

CRANKSHAFT BEARING REPLACEMENT GROUPS

CRANKSHAFT BEARING REPLACEMENT GROUPS
Only separate parts serviced
SEBP10040027 SEBP1004
  For full view, you need register

Parts for your D9H TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
    COMPLETE SET OF BEARING ASSEMBLIES AS SHOWN WITH STANDARD CRANKSHAFT
  7S-8304 [1] BEARING FRONT  
  7S-8305 [4] BEARING INTERMEDIATE  
  7S-8306 [1] BEARING CENTER  
  9S-7576 [1] BEARING REAR  
    FOR USE WITH .050 UNDERSIZE CRANKSHAFT
  7S-8309 [1] BEARING FRONT  
  7S-8310 [4] BEARING INTERMEDIATE  
  7S-8311 [1] BEARING CENTER  
  9S-7577 [1] BEARING REAR  
    .025 OVERSIZE BEARINGS FOR REBORED CYLINDER BLOCK CRANKBORE
 

#SEBP10040028
 

CRANKSHAFT BEARING REPLACEMENTS

CRANKSHAFT BEARING REPLACEMENTS
SEBP10040028 SEBP1004
  For full view, you need register

Parts for your D9H TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
    .025 OVERSIZE BEARINGS FOR REBORED CYLINDER BLOCK CRANKBORE
  6N-1653 [1] BEARING FRONT  
  6N-1650 [4] BEARING INTERMEDIATE  
  6N-1648 [1] BEARING CENTER  
  6N-1654 [1] BEARING REAR  
    .025 OVERSIZE & .025 UNDERSIZE BEARINGS FOR REBORED CYLINDER BLOCK CRANKBORE AND UNDERSIZE CRANK JOURNALS
  6N-1651 [1] BEARING FRONT  
  6N-1649 [4] BEARING INTERMEDIATE  
  6N-1647 [1] BEARING CENTER  
  6N-1652 [1] BEARING REAR  
 

#SEBP10040029
 

6L-4937: CONNECTING ROD AND PISTON GROUP

6L4937 CONNECTING ROD AND PISTON GROUP--6 Required
Serial No. 97U3095, 97U3103 & 97U3284 to 97U5465 inclusive
c116077 SEBP1004
6L4937 CONNECTING ROD AND PISTON GROUP Parts scheme
  For full view, you need register

Parts for your D9H TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  7M-4925 [1] BEARING  
    (PART OF ROD ASSEM. 9S8492)
  9S-8492 RC [1] ROD ASSEM.  
  9M-3892 [1] BEARING  
    (STANDARD)
  9M-4871 [1] BEARING  
    (.025" UNDERSIZE)
  9M-4876 [1] BEARING  
    (.050" UNDERSIZE)
  9S-7507 [1] RING  
  3S-4059 [1] RING  
  5M-5487 [1] RING  
    (PARTS OF 3S5502 ASSEM.)
  3S-5502 [1] PISTON ASSEM.  
  7M-4926 [2] RETAINER  
  4L-3843 [1] PIN  
  9S-8493 [2] BOLT  
  9S-8494 [2] NUT  
    (PARTS OF ROD ASSEM. 9S8492)
  4S-7424 [1] PISTON RING GROUP  
    (CONSISTS OF A COMPLETE SET OF RINGS FOR ONE PISTON)
  C   INDICATES CHANGE
  R   REMFG PART MAY BE AVAILABLE
 

Information:

Special Instruction
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
Installation Of 7N4013 Or 7N6342 Cylinder Block Service Group And 7N4134 Hardware Kit{1201}
Installation Of 7N4013 Or 7N6342 Cylinder Block Service Group And 7N4134 Hardware Kit{1201}
Use Of 5P8595 Honing Tool Group{1216}
Use Of 5P8595 Honing Tool Group{1216}
Installation Of 1W6265, 1W6266 And 1W6267 Insert For Cylinder Liner Seat{1217}
Installation Of 1W6265, 1W6266 And 1W6267 Insert For Cylinder Liner Seat{1217}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Use Of 6V4840 Tool Group To Install Water Ferrules{1201}
Use Of 6V4840 Tool Group To Install Water Ferrules{1201}
Cylinder Block Cleaning Procedure{1201}
Cylinder Block Cleaning Procedure{1201}
Using 5P4175 Boring Tool Group And 5P1618 Tool Arrangement{0672, 1200}
Using 5P4175 Boring Tool Group And 5P1618 Tool Arrangement{0672, 1200}
Tool Operating Manual
Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}
Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}
Using the 8T-2700 Blowby/Air Flow Indicator{0781, 0785, 1317}
Using the 8T-2700 Blowby/Air Flow Indicator{0781, 0785, 1317}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Service Magazine
New Liner Seat Insert For No. 1 And No. 4 Cylinders Of D353 Engines{1217}
1980/03/31
Correct Installation Of Inserts Necessary During Repairs To Prevent More Counterbore Cracks{1217,1201}
1981/03/09
Troubleshooting Air Bubbles In Cooling System{1217,1350}
1981/05/11
Improved Head Gasket Has Larger Fire Ring To Decrease Fretting {1101,1201}
1981/10/26
Use Of A Flex-Hone For Cylinder Liner Reconditioning{0664,0674,1216}
1981/12/21
Improved Head Gasket Has Larger Fire Ring To Decrease Fretting{1101,1201}
1982/01/11
New Tools Available For Installation Of Cylinder Liner Seats; Service Tools For Counterboring Tool Group{0622,1217}
1982/01/25
New Liner Seat Insert With O-Ring Seal Available{1217,1216}
1982/01/25
Use New Special Instruction To Install 5P6595 Insert In Cylinder Liner Seats{1216,0621}
1982/05/03
Inspection Marks On Bearings{7551,1230,1226,1203,1219,1227}
1982/05/03
Information Available For The Installation Of Inserts In Cylinder Blocks And Spacer Plates{1217,1201,0664}
1982/07/05
Service Information For Easier Use Of The 6V3100 Timing Indicator Group{0651,1250,1156,1157}
1982/10/11
Use FT1711 Light Table For Cylinder Liner Inspection {0652,1216}
1982/11/29
New 6V7059 Micrometer Measures Liner Top Flange And Valve Lip {0653,1216,1105}
1982/11/29
Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks{0622,0675,1201,1202}
1983/05/16
Reuse Of Engine Bearings{1230}
1983/05/16
Reuse Of Engine Bearings{1230,1219,1203}
1983/11/21
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Bearing Failures On Engines Due To Lack Of Lubrication{1230,1219,1203,1202}
1986/09/08
New Indicator Instrument Group Available To Measure Crankcase Blowby And Radiator Air Velocity{0781,1200,1350}
1986/10/27
Improved Cylinder Block With Spacer Plate Used With New Cylinder Heads, Cylinder Head Gaskets, Cylinder Liners And Timing Gear Housing{1101,1162,1201,1216}
1977/05/02
Improved Keystone Piston Assembly{1214,1216}
1977/05/02
Tools To Hone (Machine) Cylinder Liners Are Available To Permit The Use Of Used Cylinder Liners With New Style Pistons{0664,1214,1216}
1977/07/04
New Inserts To Repair Cylinder Liner Seats On D353 Engine Blocks{1201,1216,1217,0663,0653}
1977/07/11
More Bolts Hold Flywheel Housing Group{1157,1162}
1977/08/29
Use Only The Larger Size Inserts To Make A Repair To Cylinder Block Counterbores For Cylinder Liners{1201,1216,1217}
1977/10/10
Main And Connecting Rod Bearing Part Numbers {1203,1219,1230}
1987/01/26
Additional Guidelines For Using The 8T2700 Blowby/Air Flow Indicator Group {0781,1200,1350}
1987/07/20
5P8665 Cylinder Liner Puller Makes Liner Removal Easier And Faster{0621,1216}
1978/01/09
Use New Tools To Adapt Former Cylinder Heads With Counterbores To Cylinder Blocks With Spacer Plates{0600,1100,1101,1201}
1978/05/22
Use New Main Bearings In Replacement Cylinder Blocks{1203,1201}
1978/06/12
New Information On Reusable Cylinder Liners{1216}
1978/06/19
Change In Procedure To Check Main Bearing Clearance{1203}
1978/08/28
New Filler Bands Give A Better Seal Between The Cylinder Liners And Cylinder Block{1201,1216}
1979/05/14
New Centering Rings For Oversized Main Bearings{0665,1230}
1979/06/04
Explanation Of Extra Parts In Cylinder Block Hardware Kit{1201,7553}
1979/07/09
New Cylinder Head Gasket Has Smaller Diameter Cylinder Openings To Improve Location Of Combustion Seal Ring{1101,1201}
1979/08/13
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
New Liner Seat Inserts For Spacer Plate Cylinder Blocks Are Made Of Stainless Steel{1217,1201,0663}
1979/10/01
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17

Caterpillar Parts SIS Catalog D9H :

7N-4013 CYLINDER BLOCK GP
CYLINDER BLOCK GP
7N-3044 CYLINDER BLOCK GP
CYLINDER BLOCK ASSEMBLY
7N-2053 CYLINDER BLOCK ASSEMBLY
CYLINDER BLOCK ASSEMBLY
4N-5051 CYLINDER BLOCK ASSEMBLY
CYLINDER BLOCK GROUP
7N-1978 CYLINDER BLOCK GROUP
CYLINDER BLOCK GROUP
4N-6627 CYLINDER BLOCK GROUP
6N-3057 ENGINE ARRANGEMENT
4N-7665 BASIC ENGINE ARRANGEMENT
CYL HEAD A
7N-3630 CYL HEAD A
COVER GP-CYLINDER BLOCK
6N-1577 COVER GP-CYLINDER BLOCK
COVER GP-CYLINDER BLOCK
6N-1577 COVER GP-CYLINDER BLOCK
CYLINDER BLOCK COVER GROUP
6N-2302 CYLINDER BLOCK COVER GROUP
CYLINDER BLOCK COVER GROUP
6N-2302 CYLINDER BLOCK COVER GROUP
CRANKSHAFT GP
6N-2090 CRANKSHAFT GP
CRANKSHAFT BEARING REPLACEMENT GROUPS
CRANKSHAFT BEARING REPLACEMENTS

Truck sale:

Caterpillar D9H
 
Caterpillar D9H
- Crawler dozers
MICHIGAN CAT
 
34,500 
Caterpillar D9H, Crawler dozers, Construction


Caterpillar D9H, Crawler dozers, Construction
34,500 
Caterpillar D9H, Crawler dozers, Construction
- Crawler dozers
MICHIGAN CAT
Caterpillar D9H, Construction
40,000 
Caterpillar D9H, Construction
- Dozers
ALBAN CAT
Caterpillar D9H, Construction
64,900 
Caterpillar D9H, Construction
- Dozers
WHAYNE SUPPLY COMPANY
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.