AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

4N5136 GOVERNOR GROUP--Part 3 of 3 Serial No. 97U5477-Up D9H TRACK-TYPE TRACTOR


FUEL SYSTEM
GOVERNOR GP
CONTROL GP-GOVERNOR
TORQUE CONTROL GP
OPERATOR STATION
PANEL GP
ELECTRICAL AND STARTING SYSTEM
ALTERNATOR GP-CHARGING

TRACK-TYPE TRACTOR D9H TRACK-TYPE TRACTOR 12U
 D353 VEHICULAR ENGINE 12U00001-UP (MACHINE) SEBP1004 D9H 12U   (1974)

FUEL SYSTEM

GOVERNOR GP
DRIVE GP-GOVERNOR & FUEL PUMP
4N-5095 DRIVE GP-GOVERNOR & FUEL PUMP
GOVERNOR GP
4N-5136 GOVERNOR GP
GOVERNOR GP
4N-5136 GOVERNOR GP
GOVERNOR GP
4N-5136 GOVERNOR GP
GOVERNOR GP
4N-5136 GOVERNOR GP
GOVERNOR GP
4N-5136 GOVERNOR GP
GOVERNOR GP
4N-5136 GOVERNOR GP
 

#SEBP10040130
 

4N-5136: GOVERNOR GP

4N5136 GOVERNOR GROUP--Part 3 of 3
Serial No. 97U5477-Up
c221347 SEBP1004
4N5136 GOVERNOR GP Parts scheme
  For full view, you need register

Parts for your D9H TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7M-7244 C [1] SPRING  
2. 9M-4690 C [1] PLUG  
  2P-8763 [1] GASKET  
3. 9M-1216 [1] PLUNGER  
4. 9S-7077 [1] SCREW ASSEM. (low idle)  
    (Includes)
  9S-7078 [1] END  
5. 9S-4980 [1] SCREW  
6. 9S-7052 [1] SLEEVE  
7. 9S-4982 [1] SPRING  
8. 4H-1641 [1] PIN  
9. 6L-1756 [1] BOLT  
10. 2B-2694 [5] BOLT  
11. 5L-8992 [1] COVER  
12. 5L-8991 [1] GASKET  
13. 8S-8952 [1] SCREW (high idle)  
14. 2P-8686 [1] LEVER ASSEM.  
    (Includes)
  9S-4466 [1] LEVER ASSEM.  
15. 9M-9788 [1] PLUNGER  
16. 5H-1351 [1] PIN  
17. 7M-7316 [1] SPRING  
18. 2J-0157 [2] SEAL  
19. 8L-6206 [1] PLATE  
  8L-6207 [1] GASKET  
20. 9M-4704 [1] SCREW  
21. 0S-1617 C [4] BOLT  
  3B-4505 [4] LOCKWASHER  
22. 1A-2029 [4] BOLT  
  3B-4506 [4] LOCKWASHER  
23. 3K-6119 C [1] SPACER  
  C   INDICATES CHANGE
 

#SEBP10040131
 

4N-7163: CONTROL GP-GOVERNOR

GOVERNOR CONTROL (4N7163 N/S)--Part 1 of 2
c214456 SEBP1004
4N7163 CONTROL GP-GOVERNOR Parts scheme
  For full view, you need register

Parts for your D9H TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8H-9180 [ 2] SEAL  
2. 7M-6955 [ 1] GASKET  
3. 4N-7164 [ 1] SUPPORT ASSEM.  
    (Includes)
4. 2K-2605 [ 1] BEARING  
5. 4N-7165 [ 1] SHAFT ASSEM.  
6. 1B-2713 [ 1] BOLT  
  1B-4330 [ 1] NUT  
  5P-0537 [ 2] WASHER  
7. 4N-7032 [ 1] LEVER  
8. 4N-7116 [ 1] PLATE ASSEM.  
    (Includes)
9. 9S-4967 [ 1] BUSHING  
  9S-4968 [ 1] SLEEVE  
  6B-1985 [ 1] RIVET  
10. 5M-2894 [ 4] WASHER  
11. 0S-1594 [ 7] BOLT  
12. 0S-1571 [ 1] BOLT  
13. 8H-8678 [ 1] GASKET  
14. 1D-4717 [ 2] NUT  
15. 5H-7152 [ 1] SPRING  
16. 9S-4971 [ 1] PLATE ASSEM.  
    (Includes)
  8M-6521 [ 1] DOWEL  
17. 4N-5526 [ 1] CLAMP  
18. 8H-9182 [ 2] ROLLER  
19. 8H-9186 [ 2] SPRING  
20. 9M-3025 [ 1] COVER ASSEM.  
    (Includes)
21. 2K-2605 [ 1] BEARING  
22. 7B-8167 [ 4] BOLT  
23. 6N-4303 C [ 1] SHAFT ASSEM.  
24. 3S-3043 [ 1] LEVER  
  1B-8704 [ 1] KEY  
25. 0S-1588 [ 1] BOLT  
    INDICATES CHANGE
 

#SEBP10040132
 

4N-7163: CONTROL GP-GOVERNOR

GOVERNOR CONTROL (4N7163 N/S)--Part 2 of 2
c204899 SEBP1004
4N7163 CONTROL GP-GOVERNOR Parts scheme
  For full view, you need register

Parts for your D9H TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3K-4290 [ 2] BALLJOINT ASSEM.  
  1B-4203 [ 2] NUT  
2. 5B-9079 [ 2] NUT  
3. 4N-7114 [ 1] ROD ASSEM.  
    (Includes)
4. [ 1] PLATE  
5. 6B-1985 [ 1] RIVET  
6. 9S-4967 [ 1] BUSHING  
  9S-4968 [ 1] SLEEVE  
7. 9S-4976 [ 1] SPRING  
8. 4D-8532 [ 2] LEVER  
  1B-8704 [ 2] KEY  
9. 0S-1571 [ 2] BOLT  
  1D-4717 [ 2] NUT  
10. 5M-2894 [ 6] WASHER  
 

#SEBP10040133
 

4N-7661: CONTROL GP-GOVERNOR

GOVERNOR CONTROL (4N7661 N/S)--Part 1 of 2
c214646 SEBP1004
4N7661 CONTROL GP-GOVERNOR Parts scheme
  For full view, you need register

Parts for your D9H TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8H-9180 [2] SEAL  
2. 7M-6955 [1] GASKET  
3. 4N-7164 [1] SUPPORT ASSEM.  
    (Includes)
4. 2K-2605 [1] BEARING  
5. 4N-7165 [1] SHAFT ASSEM.  
6. 1B-2713 [1] BOLT  
  1B-4330 [1] NUT  
  5P-0537 [2] WASHER  
7. 4N-7032 [1] LEVER  
8. 4N-7116 [1] PLATE ASSEM.  
    (Includes)
9. 9S-4967 [1] BUSHING  
  9S-4968 [1] SLEEVE  
  6B-1985 [1] RIVET  
10. 5M-2894 [4] WASHER  
11. 0S-1594 [7] BOLT  
12. 0S-1571 [1] BOLT  
13. 8H-8678 [1] GASKET  
14. 1D-4717 [2] NUT  
15. 5H-7152 [1] SPRING  
16. 9S-4971 [1] PLATE ASSEM.  
    (Includes)
  8M-6521 [1] DOWEL  
17. 4N-5526 [1] CLAMP  
18. 8H-9182 [2] ROLLER  
19. 8H-9186 [2] SPRING  
20. 9M-3025 [1] COVER ASSEM.  
    (Includes)
21. 2K-2605 [1] BEARING  
22. 7B-8167 [4] BOLT  
23. 6N-4303 C [1] SHAFT ASSEM.  
24. 3S-3043 [1] LEVER  
  1B-8704 [1] KEY  
25. 0S-1588 [1] BOLT  
  C   INDICATES CHANGE
 

#SEBP10040134
 

4N-7661: CONTROL GP-GOVERNOR

GOVERNOR CONTROL (4N7661 N/S)--Part 2 of 2
c204904 SEBP1004
4N7661 CONTROL GP-GOVERNOR Parts scheme
  For full view, you need register

Parts for your D9H TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3K-4290 [2] BALLJOINT ASSEM.  
  1B-4203 [2] NUT  
2. 5B-9079 [2] NUT  
3. 4N-7114 [1] ROD ASSEM.  
    (Includes)
4. [1] PLATE  
5. 6B-1985 [1] RIVET  
6. 9S-4967 [1] BUSHING  
  9S-4968 [1] SLEEVE  
7. 9S-4976 [1] SPRING  
8. 4D-8532 [1] LEVER  
  1B-8704 [1] KEY  
9. 0S-1571 [1] BOLT  
  1D-4717 [1] NUT  
10. 5M-2894 [4] WASHER  
 

#SEBP10040135
 

4N-4267: TORQUE CONTROL GP

GOVERNOR TORQUE SPRING (4N4267 N/S)
c203605 SEBP1004
4N4267 TORQUE CONTROL GP Parts scheme
  For full view, you need register

Parts for your D9H TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4F-7957 [ 2] BOLT  
2. 9M-6292 [ 1] LOCK  
3. 4N-4218 [ 1] CONTACT  
4. 2S-7391 [ 1] BAR  
5. 8M-9062 [ 1] RETAINER  
6. 1P-9958 C [ 2] INSULATOR  
7. 3S-0602 [ 1] RETAINER  
8. 1P-6452 [ 1] INSULATOR  
9. 9L-7235 C [ 1] SHIM  
    INDICATES CHANGE
 

#SEBP10040136
 

4N-6586: METER GP-SERVICE

4N6586 SERVICE METER GROUP
c204900 SEBP1004
4N6586 METER GP-SERVICE Parts scheme
  For full view, you need register

Parts for your D9H TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8M-8162 [ 2] BOLT  
  3F-9556 [ 2] LOCKWASHER  
2. 8M-8515 [ 1] SEAL  
3. 9S-8950 [ 1] BEARING ASSEM.  
4. 8S-5575 [ 1] SEAL  
    (Part of 9S8950 Assem.)
5. 9S-8954 [ 1] SHAFT ASSEM.  
6. 9S-9332 [ 1] FITTING  
7. 4M-8303 [ 1] SEAL  
8. 9S-3032 [ 2] CLAMP  
9. 4N-6585 [ 1] SERVICE METER GROUP  
10. 5P-0758 H TUBE 22.86 cm(9 in.)  
11. 4H-3218 [ 1] CLIP  
    THE FOLLOWING REPAIR KIT IS AVAILABLE:
  1P-4923 [ 1] KIT (window)  
    (Includes Window, Gasket & Screws)
    ORDER BY THE CENTIMETRE
 

#SEBP10040137
 

9S-9350: METER GP-SERVICE

9S9350 SERVICE METER GROUP
c214649 SEBP1004
9S9350 METER GP-SERVICE Parts scheme
  For full view, you need register

Parts for your D9H TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8M-8162 C [2] BOLT  
  3F-9556 C [2] LOCKWASHER  
2. 8M-8515 [1] SEAL  
3. 9S-8950 [1] BEARING ASSEM.  
    (Includes)
4. 8S-5575 [1] SEAL  
5. 9S-8954 [1] SHAFT ASSEM.  
6. 9S-9332 [1] FITTING  
7. 4M-8303 [1] SEAL  
8. 9S-3032 [2] CLAMP  
9. 9S-9348 [1] METER ASSEM.  
10. 4H-3218 [1] CLIP  
11. 5P-6010 H TUBE .229 m(9 in.)  
  C   INDICATES CHANGE
  H   ORDER BY THE METRE
 

#SEBP10040138
 

2P-5113: ALTERNATOR GP-CHARGING

2P5113 ALTERNATOR GROUP--24 Volt, 19 Ampere
2P1204 Alternator parts are shown on Page 73
c203466 SEBP1004
2P5113 ALTERNATOR GP-CHARGING Parts scheme
  For full view, you need register

Parts for your D9H TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4D-0674 [1] WIRE ASSEM.  
2. 5P-0616 H WIRE 4.06 dm(16 in.)  
  7H-1186 [1] TERMINAL  
3. 7H-1188 [1] TERMINAL  
4. 2P-1204 Y [1] ALTERNATOR GROUP  
    (Separate Illustration)
5. 9S-9029 [1] STRAP  
6. 4N-8090 [1] PULLEY  
  2A-1531 [1] BOLT 6.50 in.(16.51 cm)long  
7. 7B-3235 [1] BOLT 1.374 in.(3.49 cm) long  
  1D-4719 [1] NUT  
  3B-4508 [2] LOCKWASHER  
  2M-0849 [2] WASHER .188 in.(.48 cm) thick  
  3B-1163 [1] WASHER .065 in.(.17 cm) thick  
8. 5M-5345 [1] VEE BELT  
9. 1A-2029 [1] BOLT  
  3B-4506 [1] LOCKWASHER  
  H   ORDER BY THE DECIMETRE
  Y   SEPARATE ILLUSTRATION
 

#SEBP10040139
 

2P-8673: ALTERNATOR GROUP

2P8673 ALTERNATOR GROUP--24 Volt, 50 Ampere
5S9088 Alternator parts are shown on Pages 74 and 75
c203848 SEBP1004
2P8673 ALTERNATOR GROUP Parts scheme
  For full view, you need register

Parts for your D9H TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5S-9088 RY [1] ALTERNATOR ASSEM.  
    (Separate Illustration)
2. 9S-9029 [1] STRAP  
3. 4N-8090 C [1] PULLEY  
4. 2A-1531 [1] BOLT 6.50 in.(16.51 cm) long  
  2M-0849 [2] WASHER  
  3B-4508 [2] LOCKWASHER  
  1D-4719 [1] NUT  
  7B-3235 [1] BOLT 1.375 in. (3.49 cm) long  
5. 5M-5345 [1] VEE BELT  
6. 1A-2029 [1] BOLT  
  3B-4506 [1] LOCKWASHER  
7. 1H-6936 [1] WIRE ASSEM.  
8. 1H-2570 [1] WIRE  
  7H-1184 [1] TERMINAL  
9. 7H-1185 [1] TERMINAL  
  R   REMFG PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
  C   INDICATES CHANGE
 

Information:

Special Instruction
Using The 6V4060 Engine Set Point Indicator Group{0781}
Using The 6V4060 Engine Set Point Indicator Group{0781}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}
Specifications
Governor Control Pedal
SUPPLEMENT FOR SXS D9H TRACTOR
Governor For Air Compressor<BR> (4N9680)
SUPPLEMENT FOR SXS D9H TRACTOR
Service Magazine
CAUTION: Procedure For Adjustment Of Fuel Rack Setting On Hydramechanical Governors Has Been Changed{0654,1250}
1980/09/01
6V2029 Fixture Group Available For Adjustment Of Air/Fuel Ratio Control {0626,1278,0652}
1981/03/23
Difference Between Static And Dynamic Rack Settings Changed{0374,1257}
1982/02/22
Difference Between Static And Dynamic Rack Settings Changed{0374,1257}
1982/03/15
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator{0651}
1982/08/16
Instrument Panel Guards Prevent Vandalism (Damage) To Machines{7315}
1982/09/20
Information For Repair Of Hydraulic Fuel Ratio Controls{1278}
1983/08/15
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint{1264}
1983/11/07
Remanufactured Air Fuel Ratio Controls {1278,7754}
1985/01/14
Comparison Of Fuel Timing Tolerances For Field Settings{1250,1251,1281}
1985/10/28
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing{1253}
1986/03/10
Be Sure The Polarity Of The Electrical Connector On EG3P Woodward Actuator Assembly Is Correct{1265,1250}
1986/05/05
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers{1257,1264}
1986/06/09
Changes Have Been Made To OT Microfiche (Fuel Setting And Related Information){1250,1251,1281}
1986/06/16
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22
Nylon Seals Used On Lockwire To Seal Critical Areas; All Subsidiary Dealers Can Now Order Parts Service Seals {1257,1264}
1986/11/03
New Spring Used In Fuel Ratio Control{1278}
1977/03/21
Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups{0781}
1987/03/16
Improved Gasket Prevents Oil Leakage From The Governor{1264}
1978/01/16
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25
Modification To Rack Adjusting Tool Needed For Higher Rack Settings{0654,1257}
1978/10/16
9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28
Changes Made To 8S2243 And 8S4613 Wrenches Used On Fuel Injection Pumps{0612,1251}
1979/08/06
Tee Handle Hexagonal Wrench In Rack Adjusting Tool Is Now Available For Parts Replacement
1979/09/10

Caterpillar Parts SIS Catalog D9H :

GOVERNOR GP
4N-5136 GOVERNOR GP
GOVERNOR GP
4N-5136 GOVERNOR GP
GOVERNOR GP
4N-5136 GOVERNOR GP
GOVERNOR GP
4N-5136 GOVERNOR GP
GOVERNOR GP
4N-5136 GOVERNOR GP
LINES GP-FUEL INJECTION
4N-6270 LINES GP-FUEL INJECTION
CONTROL GP-FUEL RATIO
2P-8708 CONTROL GP-FUEL RATIO
FILTER GP-PRIMARY FUEL
8H-4681 FILTER GP-PRIMARY FUEL
CONTROL GP-GOVERNOR
4N-7163 CONTROL GP-GOVERNOR
CONTROL GP-GOVERNOR
4N-7163 CONTROL GP-GOVERNOR
CONTROL GP-GOVERNOR
4N-7661 CONTROL GP-GOVERNOR
CONTROL GP-GOVERNOR
4N-7661 CONTROL GP-GOVERNOR
TORQUE CONTROL GP
4N-4267 TORQUE CONTROL GP
METER GP-SERVICE
4N-6586 METER GP-SERVICE
METER GP-SERVICE
9S-9350 METER GP-SERVICE
ALTERNATOR GP-CHARGING
2P-5113 ALTERNATOR GP-CHARGING

Truck sale:

Caterpillar D9H
 
Caterpillar D9H
- Crawler dozers
MICHIGAN CAT
 
34,500 
Caterpillar D9H, Crawler dozers, Construction


Caterpillar D9H, Crawler dozers, Construction
34,500 
Caterpillar D9H, Crawler dozers, Construction
- Crawler dozers
MICHIGAN CAT
Caterpillar D9H, Construction
40,000 
Caterpillar D9H, Construction
- Dozers
ALBAN CAT
Caterpillar D9H, Construction
64,900 
Caterpillar D9H, Construction
- Dozers
WHAYNE SUPPLY COMPANY
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.