AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

9N728 CAMSHAFT GROUP 3208 ENGINE - MACHINE


BASIC ENGINE
CAMSHAFT GP
PISTON & ROD GP
CYLINDER HEAD GP
VALVE MECHANISM GP

ENGINE - MACHINE 3208 ENGINE - MACHINE 90N
 3208 INDUSTRIAL ENGINES 90N06121-37284 SEBP1006 3208 90N   (2018)

BASIC ENGINE

CAMSHAFT GP
CAMSHAFT GP-SINGLE
9N-0728 CAMSHAFT GP-SINGLE
 

#SEBP10060080
 

9N-0728: CAMSHAFT GP-SINGLE

9N728 CAMSHAFT GROUP
c204912 SEBP1006
9N0728 CAMSHAFT GP-SINGLE Parts scheme
  For full view, you need register

Parts for your 3208 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9L-9378 [1] PIN  
  5L-5180 [1] WASHER  
2. 9L-7036 [1] CAMSHAFT ASSEM.  
    (Includes)
3. 9L-7032 [1] DOWEL .375 in.(9.5 mm) long  
    -OR-
  5P-4283 C [1] DOWEL .625 in. (15.88 mm) long  
4. 9L-7029 [1] GEAR ASSEM.  
    (Includes)
  9L-7028 [2] DOWEL  
  C   INDICATES CHANGE
 

#SEBP10060081
 

9N-2613: PISTON & ROD GP

9N2613 CONNECTING ROD AND PISTON GROUP--8 Required
Serial No. 90N16425 to 90N23095 inclusive
Also part of 9N2139 Short Block Group listed on Page 46B
c164269 SEBP1006
9N2613 PISTON & ROD GP Parts scheme
  For full view, you need register

Parts for your 3208 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9L-6979 [1] PISTON GROUP (standard)  
  9N-0579 H [1] PISTON GROUP (.020 in. oversize)  
  9N-0580 H [1] PISTON GROUP (.040 in. oversize)  
2. 9L-9316 [1] RING (standard oil)  
    (Part of 9L6979 Group)
  9L-9673 [1] RING  
    (.020 in. oversize-oil)
    (Part of 9N579 Group)
  9L-9323 [1] RING  
    (.040 in. oversize-oil)
    (Part of 9N580 Group)
3. 9L-6233 [1] RING (standard compression)  
    (Part of 9L6979 Group)
  9N-0581 C [1] RING (.020 in. oversize)  
    (Part of 9N579 Group)
  9N-0578 [1] RING (.040 in. oversize)  
    (Part of 9N580 Group)
4. 1J-6473 [2] RING  
5. 9L-6272 R [1] ROD ASSEM.  
    (Includes)
6. 9L-8382 [1] BEARING  
7. 9L-8225 [2] BOLT  
8. 9L-7669 [2] NUT  
9. 9N-2601 [1] BEARING  
  6N-9837 CH BEARING (.010 in. undersize)  
  6N-9838 CH [1] BEARING (.020 in. undersize)  
10. 9L-9889 [1] PIN  
  9N-0875 H [1] PISTON RING GROUP  
    (Includes Complete Set of Rings for One Piston)
  C   INDICATES CHANGE
  R   REMFG PART MAY BE AVAILABLE
  H   NOT PART OF CONNECTING ROD & P
 

#SEBP10060082
 

9N-2613: PISTON & ROD GP

9N2613 CONNECTING ROD AND PISTON GROUP--8 Required
Serial No. 90N23096-Up
Also part of 9N2139 Short Block Group listed on Page 46B
c222210 SEBP1006
9N2613 PISTON & ROD GP Parts scheme
  For full view, you need register

Parts for your 3208 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7N-9803 C [1] PIN  
2. 1J-6473 [2] RETAINER  
3. 9N-0407 R [1] ROD ASSEM.  
    (Includes)
  8N-0701 C [1] BEARING  
4. 9L-8225 [2] BOLT  
  9L-7669 [2] NUT  
5. 9N-2601 [1] BEARING (standard)  
  6N-9837 H [1] BEARING (.01 in. undersize)  
  6N-9838 H [1] BEARING (.02 in. undersize)  
6. 9L-6979 [1] PISTON GROUP (standard)  
    (Includes)
7. 9L-6233 [1] RING (standard-compression)  
8. 9L-9316 [1] RING (standard-oil)  
9. 9N-0579 H [1] PISTON GROUP (.02 in. oversize)  
    (Includes)
10. 9L-9673 [1] RING (oversize-oil)  
11. 9N-0581 [1] RING (oversize-compression)  
12. 9N-0580 H [1] PISTON GROUP (.04 in. oversize)  
    (Includes)
13. 9L-9323 [1] RING (oversize-oil)  
14. 9N-0578 [1] RING (oversize-compression)  
  C   INDICATES CHANGE
  R   REMFG PART MAY BE AVAILABLE
  H   NOT PART OF CONNECTING ROD & P
 

#SEBP10060083
 

9N-3538: PISTON & ROD GP

9N3538 CONNECTING ROD AND PISTON GROUP--8 Required--Field Installation
Part of 9N5190 Short Block Group listed on Page 46C
c222630 SEBP1006
9N3538 PISTON & ROD GP Parts scheme
  For full view, you need register

Parts for your 3208 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7N-9803 [1] PIN  
2. 1J-6473 [2] RETAINER  
3. 9N-3504 [1] ROD ASSEM.  
    (Includes)
  9N-1354 [1] BEARING  
4. 9L-8225 [2] BOLT  
  9L-7669 [2] NUT  
5. 9N-2601 [1] BEARING (standard)  
  6N-9837 H [1] BEARING (.01 in. undersize)  
  6N-9838 H [1] BEARING (.02 in. undersize)  
  7N-4352 H [1] BEARING (.05 in. undersize)  
6. 9N-3744 J [1] PISTON GROUP (standard)  
    (Includes)
7. 9L-6233 [1] RING (standard-compression)  
8. 9L-9316 [1] RING (standard-oil)  
9. 9N-5445 H [1] PISTON GROUP (.02 in. oversize)  
    (Includes)
10. 9L-9673 [1] RING (oversize-oil)  
11. 9N-0581 [1] RING (oversize-compression)  
12. 9N-5446 H [1] PISTON GROUP (.04 in. oversize)  
    (Includes)
13. 9L-9323 [1] RING (oversize-oil)  
14. 9N-0578 [1] RING (oversize-compression)  
  9N-0875 J [1] RING GROUP  
    (Includes complete set of rings for one piston)
  H   NOT PART OF CONNECTING ROD & P
 

#SEBP10060084
 

9N-1105: CYLINDER HEAD GP

9N1105 CYLINDER HEAD GROUP
Serial No. 90N6121 to 90N6234 inclusive
c168363 SEBP1006
9N1105 CYLINDER HEAD GP Parts scheme
  For full view, you need register

Parts for your 3208 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5P-4850 C [8] BOLT 7.62 cm(3 in.) long-Location "E"  
2. 3H-7654 [36] WASHER  
3. 0S-1571 [1] BOLT 4.44 cm(1.75 in.) long Location "C" - Left Head  
  9L-9166 [1] STUDBOLT 9.14 cm(3.6 in.) long-Right Head  
4. 9L-9164 C [2] GASKET  
5. 5M-6213 [4] PLUG  
6. 5B-9603 [6] BOLT 12.7 cm(5 in.) long-Location "D"  
7. 9L-7683 [8] VALVE (exhaust)  
8. 9L-7627 [2] HEAD ASSEM.  
    (Each Includes)
  9L-7657 [1] PLUG  
9. 9L-7622 [4] INSERT (exhaust)  
10. 0L-1329 [3] BOLT 7.62 cm(3 in.) long-Location "H"  
11. 8M-5860 [4] PLUG  
12. 9L-9190 [16] SPRING  
13. 9L-9425 [16] RETAINER  
14. 2A-4429 [32] LOCK  
15. 9L-8889 [16] WASHER  
16. 9N-0906 [16] SPACER  
17. 9L-7682 C [8] VALVE (Intake)  
  2N-8943 H [8] INSERT (Intake)  
18. 5P-4849 C [8] BOLT 5.71 cm(2.25 in.)long-Location "G"  
19. 5P-4851 C [8] BOLT 12 cm(4.75 in.) long-Location "F"  
20. 5P-4852 C [8] BOLT 13.3 cm(5.25 in.) long-Location "A"  
  C   INDICATES CHANGE
  H   NOT PART OF CYLINDER HEAD GROUP
 

#SEBP10060085
 

9N-1105: CYLINDER HEAD GP

9N1105 CYLINDER HEAD GROUP
Serial No. 90N6235 to 90N31600 inclusive
c215680 SEBP1006
9N1105 CYLINDER HEAD GP Parts scheme
  For full view, you need register

Parts for your 3208 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0L-1329 C [8] BOLT 7.62 cm(3 in.) long-Location "E"  
2. 3H-7654 [36] WASHER  
3. 0S-1571 [1] BOLT 4.44 cm(1.75 in.) Location "C" - Left Head  
  9L-9166 [1] STUDBOLT 9.14 cm(3.6 in.) long-Right Head  
4. 9L-9164 [2] GASKET  
5. 5M-6213 C [3] PLUG  
6. 5B-9603 [6] BOLT 12.7 cm(5 in.) long-Location "D"  
7. 9L-7683 [8] VALVE (exhaust)  
8. 9N-3111 C [2] HEAD ASSEM.  
    (Each Includes)
  9L-7657 [1] PLUG  
9. 9N-2837 [4] INSERT (exhaust)  
10. 0L-1329 [3] BOLT 7.62 cm(3 in.) long-Location "H"  
11. 8M-5860 [4] PLUG  
12. 5M-6214 [1] PLUG  
13. 9L-9425 [16] RETAINER  
14. 2A-4429 [32] LOCK  
15. 9L-8889 [16] WASHER  
16. 9N-0906 [16] SPACER  
17. 9L-7682 [8] VALVE (Intake)  
  2N-8943 H [8] INSERT (Intake)  
18. 2B-0947 C [8] BOLT 5.71 cm(2.25 in.)long-Location "G"  
19. 2B-2006 C [12] BOLT 12 cm(4.75 in.) long-Location "F"  
20. 6F-5282 C [8] BOLT 13.3 cm(5.25 in.) long-Location "A"  
21. 9N-3387 C [16] SPRING  
22. 7H-3171 C [1] PLUG  
  C   INDICATES CHANGE
  H   NOT PART OF CYLINDER HEAD GROUP
 

#SEBP10060086
 

9N-1105: CYLINDER HEAD GP

9N1105 CYLINDER HEAD GROUP
Serial No. 90N31601-Up
c219842 SEBP1006
9N1105 CYLINDER HEAD GP Parts scheme
  For full view, you need register

Parts for your 3208 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0L-1329 [8] BOLT 7.62 cm(3 in.) long-Location "E"  
2. 3H-7654 [36] WASHER  
3. 0S-1571 [1] BOLT 4.44 cm(1.75 in.) Location "C" - Left Head  
  9L-9166 [1] STUDBOLT 9.14 cm(3.6 in.) long-Right Head  
4. 9L-9164 [2] GASKET  
5. 5M-6213 C [3] PLUG  
6. 5B-9603 [6] BOLT 12.7 cm(5 in.) long-Location "D"  
7. 9L-7683 [8] VALVE (exhaust)  
8. 9N-3111 [2] HEAD ASSEM.  
    (Each Includes)
  9L-7657 [1] PLUG  
9. 9N-2837 [4] INSERT (exhaust)  
10. 0L-1329 [3] BOLT 7.62 cm(3 in.) long-Location "H"  
11. 8M-5860 [4] PLUG  
12. 5M-6214 [1] PLUG  
13. 5M-6213 C [1] PLUG  
14. 2A-4429 [32] LOCK  
15. 9L-8889 [16] WASHER  
16. 9N-0906 [16] SPACER  
17. 9L-7682 [8] VALVE (intake)  
  2N-8943 H [8] INSERT (intake)  
18. 2B-0947 [8] BOLT 5.71 cm(2.25 in.)long-Location "G"  
19. 2B-2006 [12] BOLT 12 cm(4.75 in.) long-Location "F"  
20. 6F-5282 [8] BOLT 13.3 cm(5.25 in.) long-Location "A"  
21. 9N-3387 [16] SPRING  
22. 7H-3171 [1] PLUG  
23. 9L-9425 [16] RETAINER  
  C   INDICATES CHANGE
  H   NOT PART OF CYLINDER HEAD GROU
 

#SEBP10060087
 

9N-0487: VALVE MECHANISM GP

VALVE MECHANISM (9N487 N/S)
c203349 SEBP1006
9N0487 VALVE MECHANISM GP Parts scheme
  For full view, you need register

Parts for your 3208 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9L-6386 [16] ARM ASSEM.  
  9L-9398 [16] WASHER  
2. 9L-9315 [2] SHAFT ASSEM.  
3. 9L-8094 [2] BRACKET  
4. 2B-2694 [4] BOLT- 2 in. (5.08 cm) long  
  9L-8076 [4] WASHER  
  9M-1974 [4] WASHER  
5. 9L-8198 [16] SCREW  
6. 9L-7712 [16] NUT  
7. 9L-8623 [16] PUSHROD ASSEM.  
8. 9L-9630 [16] TAPPET ASSEM.  
9. 1D-4540 [8] BOLT- 2.75 in. (7 cm) long  
  9M-1974 [8] WASHER  
 

#SEBP10060088
 

9N-0730: COVER GP-VALVE MECHANISM

VALVE MECHANISM COVER (9N730 N/S)
c201690 SEBP1006
9N0730 COVER GP-VALVE MECHANISM Parts scheme
  For full view, you need register

Parts for your 3208 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9L-7430 [1] COVER  
2. 9L-8439 [1] CAP ASSEM.  
3. 9L-8925 [16] BOLT  
4. 9L-7490 [2] GASKET  
5. 9L-7429 [1] COVER  
 

#SEBP10060089
 

9L-6978: COVER GP-VALVE MECHANISM

9L6978 VALVE MECHANISM COVER GROUP
Serial No. 90N6121 to 90N35367 inclusive
c201763 SEBP1006
9L6978 COVER GP-VALVE MECHANISM Parts scheme
  For full view, you need register

Parts for your 3208 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9L-7897 [2] COVER ASSEM.  
    (Each Includes)
  9L-7430 [1] COVER  
2. 9L-8439 [2] CAP  
3. 9L-8925 [16] BOLT  
4. 9L-8020 [2] GASKET  
5. 9L-9849 [1] COVER  
  9L-8786 [1] GASKET  
6. 9L-9850 [4] BOLT  
  9L-9021 [2] LOCK  
 

Information:

Engine News
Use 6V4068 Tool Group To Machine Camshaft Thrust Face
1981/07/15
Lubricant Gives Protection To Camshaft And Roller During Initial Start-Up
1981/10/21
Identification Of Camshaft Groups And Valve Mechanism Groups
1984/12/12
New 8T2998 Lubricant Available
1986/03/01
New Camshaft And Lifter Kits Available For Slipper Type Cam Followers (Valve Lifters)
1989/12/01
Remanufactured Camshafts And Cam Kits Available For Parts Service
1990/12/01
Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures
1977/05/25
Use The Drive Sleeve On The Fuel Injection Pump Camshaft Only One Time
1978/07/05
Special Instruction
Installation Of 8N628 Service Replacement Bearing For Rear Of Injection Pump Camshaft In Sleeve Metering Fuel Injection Pump Housing{1253}
Installation Of 8N628 Service Replacement Bearing For Rear Of Injection Pump Camshaft In Sleeve Metering Fuel Injection Pump Housing{1253}
Specifications
Camshaft
3208 INDUSTRIAL & MARINE ENGINES
Reuse And Salvage Guidelines
Reuse and Salvage for Camshafts {1210, 1210}
Reuse and Salvage for Camshafts {1210, 1210}
Information Release Memo
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Disassembly and Assembly
Camshaft & Gears
3208 INDUSTRIAL & MARINE ENGINES
Camshaft Bearings
3208 INDUSTRIAL & MARINE ENGINES
Service Magazine
Use 6V4068 Tool Group To Machine Camshaft Thrust Face{0663,1253}
1981/07/06
Lubricant Gives Protection To Camshaft And Roller During Initial Start-Up{1210,1209}
1981/09/21
Identification Of Camshaft Groups And Valve Mechanism Groups{1210,1102}
1984/11/26
New 8T2998 Lubricant Available{0645,1210}
1986/02/17
Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures{1209}
1977/05/16
Use The Drive Sleeve On The Fuel Injection Pump Camshaft Only One Time{1286,1256,1251}
1978/07/03
New Camshaft And Lifter Kits Available For Slipper Type Cam Followers (Valve Lifters){1209,1210}
1989/12/11
Remanufactured Camshafts And Cam Kits Available For Parts Service{1210,1211,1212}
1990/12/17

Caterpillar Parts SIS Catalog 3208 :

PISTON & ROD GP
9N-0150 PISTON & ROD GP
DAMPER & PULLEY GP
9N-0787 DAMPER & PULLEY GP
DAMPER & PULLEY GP
9N-0787 DAMPER & PULLEY GP
PULLEY GP-CRANKSHAFT
9L-7461 PULLEY GP-CRANKSHAFT
CRANKSHAFT BEARING REPLACEMENTS
CRANKSHAFT BEARING REPLACEMENTS
SEAL GP-CRANKSHAFT
9N-0542 SEAL GP-CRANKSHAFT
FASTENER GP-FLYWHEEL
9N-0399 FASTENER GP-FLYWHEEL
SEAL GP-CRANKSHAFT
9N-0542 SEAL GP-CRANKSHAFT
PISTON & ROD GP
9N-2613 PISTON & ROD GP
PISTON & ROD GP
9N-2613 PISTON & ROD GP
PISTON & ROD GP
9N-3538 PISTON & ROD GP
CYLINDER HEAD GP
9N-1105 CYLINDER HEAD GP
CYLINDER HEAD GP
9N-1105 CYLINDER HEAD GP
CYLINDER HEAD GP
9N-1105 CYLINDER HEAD GP
VALVE MECHANISM GP
9N-0487 VALVE MECHANISM GP
COVER GP-VALVE MECHANISM
9N-0730 COVER GP-VALVE MECHANISM

Truck sale:

 
11,500 
Caterpillar D3208EP, Construction
- Stationary Generator Sets
FOLEY EQUIPMENT COMPANY
CATERPILLAR 3208 1993
 
CATERPILLAR 3208 1993
- STATIONARY - DIESEL
WAGNER EQUIPMENT CO
United States
CATERPILLAR 3208 2004
 
CATERPILLAR 3208 2004
- STATIONARY GENERATOR SETS
EMPRESAS MATCO, S.A. DE C.V.
Sufragio Efectivo Norte 870 - Obregón -
1998 CAT 3208
USD $19,000 
1998 CAT 3208

Galactic Liquidation LLC
1990 CAT 3208
 
1990 CAT 3208

Ken Porter Auctions
Carson, California
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.