AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

D7G TRACTOR / POWERSHIFT / 92V00001-02126 (MACHINE) POWER TRAIN Caterpillar SIS



TRACK-TYPE TRACTOR D7G TRACK-TYPE TRACTOR 92V
 D7G TRACTOR / POWERSHIFT / 92V00001-02126 (MACHINE) SEBP1010 D7G 92V   (1975)

Parts group D7G:

  For full view, you need register
POWER TRAIN
CONTROL GP-TRANSMISSION HYD
TRANSMISSION HYDRAULIC CONTROL
3P-0360 TRANSMISSION HYDRAULIC CONTROL
TRANSMISSION HYDRAULIC CONTROL (3P360 N/S)
Part of 3P4376 Transmission Arrangement shown on Page 55
3P359, 8M6347 and 8M6348 Valve parts are shown on Pages 60 and 61
FILTER GP
FILTER GP
3S-1741 FILTER GP
3S1741 TRANSMISSION AND STEERING CLUTCH FILTER GROUP
Part of Transmission Oil Lines shown on Page 66
GEAR GP
GEAR GP-TRANSFER
3P-4375 GEAR GP-TRANSFER
3P4375 TRANSFER GEAR GROUP
Part of 3P4376 Transmission Arrangement shown on Page 55
LINES GP-POWER TRAIN OIL
LINES GP-TRANSMISSION OIL
3P-5586 LINES GP-TRANSMISSION OIL
3P5586 TRANSMISSION OIL LINES GROUP--Part 1 of 2
3P7461 Valve and 3S1741 Filter parts are shown on Pages 68 and 69
See Page 165 for Gasket Kits
3P-5586 LINES GP-TRANSMISSION OIL
3P5586 TRANSMISSION OIL LINES GROUP--Part 2 of 2
3P361 Valve, 9M8669 Screen and 2P9239 Pump parts are shown on ages 68, 69 and 70
LINES GP-TRANSMISSION OIL
LINES GP-TRANSMISSION OIL
3P-5586 LINES GP-TRANSMISSION OIL
3P5586 TRANSMISSION OIL LINES GROUP--Part 1 of 2
3P7461 Valve and 3S1741 Filter parts are shown on Pages 68 and 69
See Page 165 for Gasket Kits
3P-5586 LINES GP-TRANSMISSION OIL
3P5586 TRANSMISSION OIL LINES GROUP--Part 2 of 2
3P361 Valve, 9M8669 Screen and 2P9239 Pump parts are shown on ages 68, 69 and 70
PUMP GP
PUMP GP-GEAR
2P-9239 PUMP GP-GEAR
2P9239 GEAR PUMP GROUP
Part of 3P5586 Transmission Oil Lines Group shown on Page 67
PUMP GP-SCAVENGE
3P-4548 PUMP GP-SCAVENGE
GEAR PUMP (3P4548 N/S)--Single Section--Scavenge
PUMP GP-SCAVENGE
5M-7864 PUMP GP-SCAVENGE
5M7864 SCAVENGE PUMP GROUP
Part of Gear Pump
SCREEN GP
SCREEN GP-MAGNETIC
9M-8669 SCREEN GP-MAGNETIC
9M8669 MAGNETIC SCREEN ASSEMBLY
Part of Transmission Oil Lines shown on Page 67
SHAFT GP
UNIVERSAL JOINT GP
5S-0723 UNIVERSAL JOINT GP
5S723 UNIVERSAL JOINT ASSEMBLY
Part of 2P9889 Drive Shaft Group shown on Page 49
DRIVE SHAFT GP
2P-9889 DRIVE SHAFT GP
2P9889 DRIVE SHAFT GROUP
5S723 Joint parts are shown on Page 48B
SPROCKET GP
SEGMENTED SPROCKET GROUP
8P-0061 SEGMENTED SPROCKET GROUP
8P61 SEGMENTED SPROCKET GROUP
Part of 2S7100 Final Drive Group shown on Pages 72 and 72B
6P-8688 SPROCKET SEGMENT GROUP
6P8688 SPROCKET SEGMENT GROUP
FOR USE WITH SEALED NON-LUBRICATED TRACKS. AN ATTACHMENT
TORQUE CONVERTER GP
TORQUE CONVERTER GP
1T-0930 TORQUE CONVERTER GP
1T930 TORQUE CONVERTER ASSEMBLY
Part of Torque Converter shown on Page 52
DIVIDER GP-TORQUE
3P-4680 DIVIDER GP-TORQUE
TORQUE CONVERTER (3P4680 N/S)--Part 1 of 2
1T930 Torque Converter parts are shown on Page 51
See Page 165 for Gasket Kits
3P-4680 DIVIDER GP-TORQUE
TORQUE CONVERTER (3P4680 N/S)--Part 2 of 2
TORQUE DIVIDER GP
DIVIDER GP-TORQUE
3P-4680 DIVIDER GP-TORQUE
TORQUE CONVERTER (3P4680 N/S)--Part 1 of 2
1T930 Torque Converter parts are shown on Page 51
See Page 165 for Gasket Kits
3P-4680 DIVIDER GP-TORQUE
TORQUE CONVERTER (3P4680 N/S)--Part 2 of 2
TRANSMISSION GP
TRANSMISSION ARRANGEMENT
3P-4376 TRANSMISSION ARRANGEMENT
3P4376 TRANSMISSION ARRANGEMENT
Transmission Hydraulic Control, Planetary Transmission, Transfer Gears
and Transmission Case and Covers parts are shown on Pages 59 and
62 through 65
PLANETARY TRANSMISSION
2P-3663 PLANETARY TRANSMISSION
PLANETARY TRANSMISSION (2P3663 N/S)--Part 1 of 2
Part of 3P4376 Transmission Arrangement shown on Page 55
See Page 165 for Gasket Kits
2P-3663 PLANETARY TRANSMISSION
PLANETARY TRANSMISSION (2P3663 N/S)--Part 2 of 2
Part of 3P4376 Transmission Arrangement shown on Page 55
CASE & COVERS GP-TMSN
1P-0577 CASE & COVERS GP-TMSN
1P577 TRANSMISSION CASE AND COVERS GROUP
Part of 3P4376 Transmission Arrangement shown on Page 55
VALVE GP-CONTROL
FLOW CONTROL VALVE GROUP
8M-6347 FLOW CONTROL VALVE GROUP
8M6347 FLOW CONTROL VALVE GROUP
Part of Transmission Hydraulic Control shown on Page 59
VALVE GP-PRESSURE CONTROL
PRESSURE CONTROL VALVE GROUP
3P-0359 PRESSURE CONTROL VALVE GROUP
3P359 PRESSURE CONTROL VALVE GROUP
Part of Transmission Hydraulic Control shown on Page 59
VALVE GP-RELIEF
VALVE GP-RELIEF
3P-4406 VALVE GP-RELIEF
RELIEF VALVE (3P4406 N/S)--Torque Converter
VALVE GP-SELECTOR
SELECTOR AND SAFETY VALVE GROUP
8M-6348 SELECTOR AND SAFETY VALVE GROUP
8M6348 SELECTOR AND SAFETY VALVE GROUP
Part of Transmission Hydraulic Control shown on Page 59
VALVE GP-TRANSMISSION CONTROL
TRANSMISSION HYDRAULIC CONTROL
3P-0360 TRANSMISSION HYDRAULIC CONTROL
TRANSMISSION HYDRAULIC CONTROL (3P360 N/S)
Part of 3P4376 Transmission Arrangement shown on Page 55
3P359, 8M6347 and 8M6348 Valve parts are shown on Pages 60 and 61
COOLER GP
LINES GP-TORQUE CONV COOLER
3P-7513 LINES GP-TORQUE CONV COOLER
3P7513 TORQUE CONVERTER COOLER LINES GROUP--Part 1 of 2
3P-7513 LINES GP-TORQUE CONV COOLER
3P7513 TORQUE CONVERTER COOLER LINES GROUP--Part 2 of 2
DRIVE GP-FINAL
FINAL DRIVE GP
2S-7100 FINAL DRIVE GP
2S7100 FINAL DRIVE GROUP--Part 1 of 2
Serial No. 92V1 to 92V1596 inclusive
8P61 Sprocket parts are shown on Page 75
2S-7100 FINAL DRIVE GP
2S7100 FINAL DRIVE GROUP--Part 2 of 2
Serial No. 92V1 to 92V1596 inclusive
FINAL DRIVE GP
2S-7100 FINAL DRIVE GP
2S7100 FINAL DRIVE GROUP--Part 1 of 2
Serial No. 92V1597-Up
8P61 Sprocket parts are shown on Page 75
Note: 8P9455 Segment is available
2S-7100 FINAL DRIVE GP
2S7100 FINAL DRIVE GROUP--Part 2 of 2
Serial No. 92V1597-Up
FINAL DRIVE CASE AND REVERSIBLE WEAR GUARD GROUP
3S-2419 FINAL DRIVE CASE AND REVERSIBLE WEAR GUARD GROUP
3S2419 FINAL DRIVE CASE AND REVERSIBLE WEAR GUARD GROUP--Steel
AN ATTACHMENT
CASE GP-FINAL DRIVE
8P-1687 CASE GP-FINAL DRIVE
8P1687 STEEL FINAL DRIVE CASE GROUP
AN ATTACHMENT

Information:

(For parts list, see above)

Special Instruction
Accumulator Discharging and Charging Procedures {0738, 4263, 4264, 4331, 5077, 5077, 5081, 7474}
Accumulator Discharging and Charging Procedures {0738, 4263, 4264, 4331, 5077, 5077, 5081, 7474}
Decommissioning Procedure for Permanently Sealed Diaphragm Accumulators {5077}
Decommissioning Procedure for Permanently Sealed Diaphragm Accumulators {5077}
Installation of Sprocket Segment Adapter Groups or Salvaging Segmented Sprocket Hubs{4163}
Installation of Sprocket Segment Adapter Groups or Salvaging Segmented Sprocket Hubs{4163}
Assembly and Installation of Conventional Duo-Cone Seals{7561, 7561}
Assembly and Installation of Conventional Duo-Cone Seals{7561, 7561}
Tool and Specification Chart for Conventional Duo-Cone Seal Groups {0599, 7561}
Tool and Specification Chart for Conventional Duo-Cone Seal Groups {0599, 7561}
Installation of Conventional Duo-Cone Seals{7561}
Installation of Conventional Duo-Cone Seals{7561}
Installation of Inverted Duo-Cone Seals{7561}
Installation of Inverted Duo-Cone Seals{7561}
Inspection of the Duo-cone Seal Gp{4050, 4051, 7561}
Inspection of the Duo-cone Seal Gp{4050, 4051, 7561}
Reuse And Salvage Guidelines
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Service Magazine
Self-contained Filter Cart Evacuates Oil, Filters Oil and Refills System {0727}
2004/02/16
Product Information Guide, SEBF1015, "Improving Component Durability" , "Final Drives and Differentials" is now available {3258, 3282, 4050}
2004/04/12
Determining the Severity of a Leak of the Duo-cone Seal Gp {4050, 4051, 7561}
2010/02/25
Special Instruction
Assembly and Installation of Conventional Duo-Cone Seals{7561, 7561}
Assembly and Installation of Conventional Duo-Cone Seals{7561, 7561}
Installation of Conventional Duo-Cone Seals{7561}
Installation of Conventional Duo-Cone Seals{7561}
Installation of Inverted Duo-Cone Seals{7561}
Installation of Inverted Duo-Cone Seals{7561}
Assembly and Installation of Conventional Duo-Cone Seals{7561, 7561}
Assembly and Installation of Conventional Duo-Cone Seals{7561, 7561}
Installation of Conventional Duo-Cone Seals{7561}
Installation of Conventional Duo-Cone Seals{7561}
Installation of Inverted Duo-Cone Seals{7561}
Installation of Inverted Duo-Cone Seals{7561}
Disassembly and Assembly
Parking Brake Lock
D7G TRACTOR OPERATOR'S STATION
Transmission (Direct Drive)
D7G TRACTOR POWER TRAIN
Reuse And Salvage Guidelines
Identification of Non-Metallic Discs that are Used in Power Shift Transmissions {3030, 3155}
Identification of Non-Metallic Discs that are Used in Power Shift Transmissions {3030, 3155}
Repair of Reaction Dowel Holes in Transmission Clutch Housings {3030, 3155, 3169}
Repair of Reaction Dowel Holes in Transmission Clutch Housings {3030, 3155, 3169}
Disassembly and Assembly
Flywheel Clutch Oil Pump (Direct Drive)
D7G TRACTOR POWER TRAIN
Flywheel Clutch Oil Pump
D7G TRACTOR POWER TRAIN
Flywheel Clutch Brake (Direct Drive)
D7G TRACTOR POWER TRAIN
Flywheel Clutch (Direct Drive)
D7G TRACTOR POWER TRAIN
Special Instruction
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Specifications
Transmission Hydraulic Control
D7G Track-Type Tractor Power Train
Bench Test Procedures
Bench Test Procedure for a D7F, D7G Track-Type Tractor, 571G, and 572G Pipelayer Transmission{3030, 3073}
Bench Test Procedure for a D7F, D7G Track-Type Tractor, 571G, and 572G Pipelayer Transmission{3030, 3073}
Disassembly and Assembly
Transmission Hydraulic Control Valves
D7G TRACTOR POWER TRAIN
Transmission Hydraulic Control Valves (Earlier)
D7G TRACTOR POWER TRAIN
Transmission Hydraulic Control Valves (Later)
D7G TRACTOR POWER TRAIN
Special Instruction
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Reuse And Salvage Guidelines
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Contamination Control Guidelines
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Applied Failure Analysis
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Bench Test Procedures
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Service Magazine
Double Lip Wiper Seals Must Be Installed Properly {7562}
2002/12/09
A Rework Procedure Improves the Seal Assembly Performance in Hydraulic Cylinders on Cat Products {7562}
2010/04/30
Specifications
Bevel Gear and Pinion
D7G Track-Type Tractor Power Train
Tool Operating Manual
226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561}
226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561}
Reuse And Salvage Guidelines
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Procedure to Machine Damaged Transmission and Differential Yokes {3030, 3253, 3258}
Procedure to Machine Damaged Transmission and Differential Yokes {3030, 3253, 3258}
Thermal Spray Procedures for Bevel Gear Shafts{0679, 3256}
Thermal Spray Procedures for Bevel Gear Shafts{0679, 3256}
Contamination Control Guidelines
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Disassembly and Assembly
Bevel Gear And Shaft (Power Shift And Direct Drive)
D7G TRACTOR POWER TRAIN
Transmission And Transfer Gears (Power Shift Without Cab)
D7G TRACTOR POWER TRAIN
Service Magazine
New Procedure Used To Set Bearing Preload Of Bevel Gear Shaft{4119}
1985/11/18
The Special Breathers For The Bevel Gear Case And The Final Drive Cases Have Been Removed-A Common Breather For These Systems Is Now Located On The Transmission Oil Filler Spout{4059,4070,3179,3067}
1978/04/24
Tool Operating Manual
226-2380 Multi-Purpose Lifting Bracket Group{3258, 4050, 4084, 4208, 7561}
226-2380 Multi-Purpose Lifting Bracket Group{3258, 4050, 4084, 4208, 7561}
226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561}
226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561}
Reuse And Salvage Guidelines
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Procedure to Machine Damaged Transmission and Differential Yokes {3030, 3253, 3258}
Procedure to Machine Damaged Transmission and Differential Yokes {3030, 3253, 3258}
Thermal Spray Procedures for Bevel Gear Shafts{0679, 3256}
Thermal Spray Procedures for Bevel Gear Shafts{0679, 3256}
Contamination Control Guidelines
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Service Magazine
Product Information Guide, SEBF1015, "Improving Component Durability" , "Final Drives and Differentials" is now available {3258, 3282, 4050}
2004/04/12
Tool Operating Manual
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
Service Magazine
Improved 5P3000 Engine And Transmission Shipping Stand Assembly; Modification Available For Stands Already In Use{0640}
1977/04/25
Tool Operating Manual
345-1236 Lifting Bracket{0599, 0629, 0632, 6605}
345-1236 Lifting Bracket{0599, 0629, 0632, 6605}
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Service Magazine
Instrument Panel Guards Prevent Vandalism (Damage) To Machines{7315}
1982/09/20
The Special Breathers For The Bevel Gear Case And The Final Drive Cases Have Been Removed-A Common Breather For These Systems Is Now Located On The Transmission Oil Filler Spout{4059,4070,3179,3067}
1978/04/24
Portable Test and Fill Machine Designed for a Service Vehicle but Works Fast Enough for the Shop {0768}
2006/02/27
Special Instruction
Guidelines for the Use of Clean Out Filters for the Hydraulic Oil System and for the Power Train Oil System{3067, 5068}
Guidelines for the Use of Clean Out Filters for the Hydraulic Oil System and for the Power Train Oil System{3067, 5068}
Specifications
Transmission Oil Filter
D7G Track-Type Tractor Power Train
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Disassembly and Assembly
Transmission And Steering Clutch Oil Filter
D7G TRACTOR POWER TRAIN
Service Magazine
Green Dye (Color) Added To Transmission Oil For Easier Identification Of Leaks{3004,3067,3179}
1981/01/19
The Special Breathers For The Bevel Gear Case And The Final Drive Cases Have Been Removed-A Common Breather For These Systems Is Now Located On The Transmission Oil Filler Spout{4059,4070,3179,3067}
1978/04/24
Revision Of Recommendations For Temporary Increases In Transmission Oil Level During Operation On Severe (High Angle) Slopes{4059,3067,3179}
1979/12/10
Color Coded Dust Caps for S&middot;O&middot;S Ports Will Be Available {7770}
2003/12/01
Optional High Efficiency Filters Are Now Available {3004, 5068}
2003/07/07
Understanding Transmission Filter Plugging Events {3004, 3067}
2007/04/02
New Oil Filters for all Cat Machines are Available {3004, 3067, 4295, 431F, 5068}
New Oil Filters for all Cat Machines are Available {3004, 3067, 4295, 431F, 5068}
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Special Instruction
Bearing Preload Procedure for the Bevel Gear Shaft{3256}
Bearing Preload Procedure for the Bevel Gear Shaft{3256}
Specifications
Bevel Gear and Pinion
D7G Track-Type Tractor Power Train
Tool Operating Manual
396-6461 Tube Assembly{0374, 0599, 0632, 3030, 3258}
396-6461 Tube Assembly{0374, 0599, 0632, 3030, 3258}
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
Reuse And Salvage Guidelines
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Conventional (Non-Planetary) Final Drive Gears for Track Type Tractors and Track Type Loaders {4055, 7552}
Conventional (Non-Planetary) Final Drive Gears for Track Type Tractors and Track Type Loaders {4055, 7552}
Disassembly and Assembly
Bevel Gear And Shaft (Power Shift And Direct Drive)
D7G TRACTOR POWER TRAIN
Transmission And Transfer Gears (Power Shift Without Cab)
D7G TRACTOR POWER TRAIN
Service Magazine
New Procedure Used To Set Bearing Preload Of Bevel Gear Shaft{4119}
1985/11/18
The Special Breathers For The Bevel Gear Case And The Final Drive Cases Have Been Removed-A Common Breather For These Systems Is Now Located On The Transmission Oil Filler Spout{4059,4070,3179,3067}
1978/04/24
New Bearings Are Used in D7G Steering Clutches {3256}
2003/04/07
Correction to Service Magazine, SEPD0678 , "New Bearings Are Used in D7G Steering Clutches" {3256}
2004/03/22
Spanner Wrench is Available for Ecology Drain Valves {1302, 1353, 1372, 5076, 5613}
2006/03/20
Tool Operating Manual
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
Reuse And Salvage Guidelines
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Service Magazine
Inspection Marks On Bearings{7551,1230,1226,1203,1219,1227}
1982/05/03
Special Instruction
O-Rings - Radial, Fitting Assembly O-Rings and Other O-Ring Applications {0599, 0738, 4000, 4250, 4300, 5050, 5057, 7555}
O-Rings - Radial, Fitting Assembly O-Rings and Other O-Ring Applications {0599, 0738, 4000, 4250, 4300, 5050, 5057, 7555}
Reuse And Salvage Guidelines
Replacing Tubes In Housings That Are Installed With Mechanical Joints (Expanded and Welded) {3016, 3154, 4104, 4133, 5057}
Replacing Tubes In Housings That Are Installed With Mechanical Joints (Expanded and Welded) {3016, 3154, 4104, 4133, 5057}
Special Instruction
Hose and Coupling Assembly and Repair Process Guide{0684, 3016, 3103, 3154, 4133, 4257, 4304, 5057, 7554}
Hose and Coupling Assembly and Repair Process Guide{0684, 3016, 3103, 3154, 4133, 4257, 4304, 5057, 7554}
O-Rings - Radial, Fitting Assembly O-Rings and Other O-Ring Applications {0599, 0738, 4000, 4250, 4300, 5050, 5057, 7555}
O-Rings - Radial, Fitting Assembly O-Rings and Other O-Ring Applications {0599, 0738, 4000, 4250, 4300, 5050, 5057, 7555}
Service Magazine
Green Dye (Color) Added To Transmission Oil For Easier Identification Of Leaks{3004,3067,3179}
1981/01/19
New Hose Assembly Used In Oil Lines Group For Brake Cooling{3154,4100}
1978/02/27
The Special Breathers For The Bevel Gear Case And The Final Drive Cases Have Been Removed-A Common Breather For These Systems Is Now Located On The Transmission Oil Filler Spout{4059,4070,3179,3067}
1978/04/24
Revision Of Recommendations For Temporary Increases In Transmission Oil Level During Operation On Severe (High Angle) Slopes{4059,3067,3179}
1979/12/10
Color Coded Dust Caps for S&middot;O&middot;S Ports Will Be Available {7770}
2003/12/01
New Hose Assembly Used In Oil Lines Group For Brake Cooling{3154,4100}
1978/02/27
Reuse And Salvage Guidelines
Replacing Tubes In Housings That Are Installed With Mechanical Joints (Expanded and Welded) {3016, 3154, 4104, 4133, 5057}
Replacing Tubes In Housings That Are Installed With Mechanical Joints (Expanded and Welded) {3016, 3154, 4104, 4133, 5057}
Service Magazine
New Hose Assembly Used In Oil Lines Group For Brake Cooling{3154,4100}
1978/02/27
Special Instruction
Sprocket Removal And Installation{4164}
Sprocket Removal And Installation{4164}
Installation of 3P7665 Relief Valve Group{3100}
Installation of 3P7665 Relief Valve Group{3100}
Installation of 8P7790 Pressure Control Valve{3152}
Installation of 8P7790 Pressure Control Valve{3152}
Service Letter-NACD
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Service Letter-Truck/Ag/Marine
Technical Information Bulletin
Transmission Charge Pump Centerbodies Can Be Modified To Improve The Life Of Pumps With 8-Tooth, Powder Metal Gears
Transmission Charge Pump Centerbodies Can Be Modified To Improve The Life Of Pumps With 8-Tooth, Powder Metal Gears
Service Letter-China
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Service Letter-Asia
Service Letter-APD
Service Magazine
Locks Removed From Rear Carrier In Planetary Group{3176,3150}
1981/05/18
Instrument Panel Guards Prevent Vandalism (Damage) To Machines{7315}
1982/09/20
Improved Lubrication Of Final Drive Bearing{4059,4070}
1984/10/15
New Procedure Used To Set Bearing Preload Of Bevel Gear Shaft{4119}
1985/11/18
New Seal Groups Used On Sprocket Hub{4052,7555}
1977/02/21
Improved 5P3000 Engine And Transmission Shipping Stand Assembly; Modification Available For Stands Already In Use{0640}
1977/04/25
New Spring Used In Valve Group For Transmission Pressure Control{3152}
1977/09/05
New Hose Assembly Used In Oil Lines Group For Brake Cooling{3154,4100}
1978/02/27
Use Correct Procedure To Install The Studs Used To Hold The Transmission{3050,3100,3150}
1978/04/03
The Special Breathers For The Bevel Gear Case And The Final Drive Cases Have Been Removed-A Common Breather For These Systems Is Now Located On The Transmission Oil Filler Spout{4059,4070,3179,3067}
1978/04/24
Magnetic Plug Gives A Visual Indication Of Possible Final Drive Damage{4059}
1978/09/25
Cast Ring Duo-Cone Seal Groups Available For Parts Service{7561}
1988/05/23
Special Instruction
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Test Specifications for Vane Cartridges{0784, 5058, 5070}
Test Specifications for Vane Cartridges{0784, 5058, 5070}
Tool Operating Manual
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
Reuse And Salvage Guidelines
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 4, 5, and 6) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 4, 5, and 6) {5061, 5073}
General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070}
General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070}
Bench Test Procedures
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Disassembly and Assembly
Rear Accessory Drive Gears
3306 VEHICULAR ENGINE FOR D7G TRACTOR
Special Instruction
Instructions to Register the Retrofit and Submit Service Reporting {1000, 3000, 7000, 7570}
Instructions to Register the Retrofit and Submit Service Reporting {1000, 3000, 7000, 7570}
Reuse And Salvage Guidelines
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Final Drive Steering System, Wheel Braking System, and Wheels & Tires Salvage and Reuse Manual Contents {4000, 4050, 4100, 4250, 4300}
Final Drive Steering System, Wheel Braking System, and Wheels & Tires Salvage and Reuse Manual Contents {4000, 4050, 4100, 4250, 4300}
Disassembly and Assembly
Rear Bottom Guard
D7G TRACTOR POWER TRAIN
Service Magazine
Improved Registration Process for Retrofit Products {1000, 3000, 7000, 7570}
2011/02/17
Instrument Panel Guards Prevent Vandalism (Damage) To Machines{7315}
1982/09/20
Special Instruction
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Repair Process for Hydraulic Gear Pumps {5073}
Repair Process for Hydraulic Gear Pumps {5073}
Test Specifications for Vane Cartridges{0784, 5058, 5070}
Test Specifications for Vane Cartridges{0784, 5058, 5070}
Service Letter-NACD
The 8P4547 And 8P4548 Gears Need To Be Removed From Parts Stock And Changed Out Of 2P9239 Pump Assemblies
The 8P4547 And 8P4548 Gears Need To Be Removed From Parts Stock And Changed Out Of 2P9239 Pump Assemblies
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Technical Information Bulletin
Transmission Charge Pump Centerbodies Can Be Modified To Improve The Life Of Pumps With 8-Tooth, Powder Metal Gears
Transmission Charge Pump Centerbodies Can Be Modified To Improve The Life Of Pumps With 8-Tooth, Powder Metal Gears
Specifications
Transmission and Torque Converter Pump
D7G Track-Type Tractor Power Train
Tool Operating Manual
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
Service Letter-China
The 8P4547 And 8P4548 Gears Need To Be Removed From Parts Stock And Changed Out Of 2P9239 Pump Assemblies
The 8P4547 And 8P4548 Gears Need To Be Removed From Parts Stock And Changed Out Of 2P9239 Pump Assemblies
Service Letter-Asia
Reuse And Salvage Guidelines
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Hydraulic Gear Pumps Used in Transmissions {3066, 5073}
Hydraulic Gear Pumps Used in Transmissions {3066, 5073}
Repair Process for Hydraulic Gear Pumps {5073}
Repair Process for Hydraulic Gear Pumps {5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 4, 5, and 6) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 4, 5, and 6) {5061, 5073}
Removing and Installing Bushings and Pressure Plates in Hydraulic Gear Pumps {5073}
Removing and Installing Bushings and Pressure Plates in Hydraulic Gear Pumps {5073}
General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070}
General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070}
Thermal Spray Procedures for Tyrone Drive Shaft (Pump Gear){0679, 3066, 5073}
Thermal Spray Procedures for Tyrone Drive Shaft (Pump Gear){0679, 3066, 5073}
Service Letter-APD
The 8P4547 And 8P4548 Gears Need To Be Removed From Parts Stock And Changed Out Of 2P9239 Pump Assemblies
The 8P4547 And 8P4548 Gears Need To Be Removed From Parts Stock And Changed Out Of 2P9239 Pump Assemblies
Bench Test Procedures
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Bench Test Procedure for Gear Pumps {5073}
Bench Test Procedure for Gear Pumps {5073}
Disassembly and Assembly
Universal Joint, Transmission Oil Pump
D7G TRACTOR POWER TRAIN
Transmission Oil Pump (Power Shift)
D7G TRACTOR POWER TRAIN
Transmission Oil Pump (Direct Drive)
D7G TRACTOR POWER TRAIN
Transmission Oil Pump (Power Shift)
D7G TRACTOR POWER TRAIN
Transmission Oil Pump (Direct Drive)
D7G TRACTOR POWER TRAIN
Torque Divider Scavenge Pump
D7G TRACTOR POWER TRAIN
Magnetic Screen Group
D7G TRACTOR POWER TRAIN
Special Instruction
Tool and Specification Chart for Conventional Duo-Cone Seal Groups {0599, 7561}
Tool and Specification Chart for Conventional Duo-Cone Seal Groups {0599, 7561}
Inspection of the Duo-cone Seal Gp{4050, 4051, 7561}
Inspection of the Duo-cone Seal Gp{4050, 4051, 7561}
Service Magazine
Final Drive Duo-Cone Seal Assembly Information Update {7561}
2009/01/26
Determining the Severity of a Leak of the Duo-cone Seal Gp {4050, 4051, 7561}
2010/02/25
Specifications
Drive Shaft
D7G Track-Type Tractor Power Train
Reuse And Salvage Guidelines
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Procedure to Machine Damaged Transmission and Differential Yokes {3030, 3253, 3258}
Procedure to Machine Damaged Transmission and Differential Yokes {3030, 3253, 3258}
Disassembly and Assembly
Rear Bottom Guard
D7G TRACTOR POWER TRAIN
Universal Joint, Transmission Oil Pump
D7G TRACTOR POWER TRAIN
Reuse And Salvage Guidelines
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Special Instruction
Installation of Sprocket Segment Adapter Groups or Salvaging Segmented Sprocket Hubs{4163}
Installation of Sprocket Segment Adapter Groups or Salvaging Segmented Sprocket Hubs{4163}
Use Of 6V3180 Sprocket Tool Arrangement{4058, 4164}
Use Of 6V3180 Sprocket Tool Arrangement{4058, 4164}
Sprocket Removal And Installation{4164}
Sprocket Removal And Installation{4164}
Reuse And Salvage Guidelines
Salvage of Final Drive Sprocket Hubs For Pipelayers, Track Loaders, and Track-Type Tractors {4050, 4184}
Salvage of Final Drive Sprocket Hubs For Pipelayers, Track Loaders, and Track-Type Tractors {4050, 4184}
Disassembly and Assembly
Sprocket Segments
D7G TRACTOR POWER TRAIN
Sprocket Assemblies
D7G TRACTOR POWER TRAIN
Sprocket Shafts
D7G TRACTOR POWER TRAIN
Service Magazine
New Seal Groups Used On Sprocket Hub{4052,7555}
1977/02/21
Reuse And Salvage Guidelines
Filtration Times for Caterpillar Machine Fluid Compartments{0680, 0738, 0768, 3080, 5050, 5056, 5095}
Filtration Times for Caterpillar Machine Fluid Compartments{0680, 0738, 0768, 3080, 5050, 5056, 5095}
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Filtration Times for Caterpillar Machine Fluid Compartments{0680, 0738, 0768, 3080, 5050, 5056, 5095}
Filtration Times for Caterpillar Machine Fluid Compartments{0680, 0738, 0768, 3080, 5050, 5056, 5095}
Service Magazine
243-3133 Quick Connect Coupler (Fluid Sampling) Provides A Coupler for Portable Particle Analyzers {0707, 0717, 0731, 0732, 0738}
2004/07/01
Truck Engine News
Single Purpose Fluid Sampling Valves and Dual Purpose Fluid Sampling Valves Require Different Quick Connect Couplers {0645, 7542}
2004/11/29
New Infrared Thermometer Has Narrow, 50:1 Target Ratio, Wide Temperature Range {0776, 1350, 3000, 4000, 4150, 4250}
2006/03/27
Engine News
Single Purpose Fluid Sampling Valves and Dual Purpose Fluid Sampling Valves Require Different Quick Connect Couplers {0645, 7542}
2004/11/29
Special Instruction
Use of 8T5200 Signal Generator/Counter Group{0778, 0783, 0785}
Use of 8T5200 Signal Generator/Counter Group{0778, 0783, 0785}
Procedure to Salvage the Slots for the Pin and Holes for the Reaction Dowel in Transmission Clutch Plates, Pistons, and Housings {3030, 3050, 3169, 3170, 3190}
Procedure to Salvage the Slots for the Pin and Holes for the Reaction Dowel in Transmission Clutch Plates, Pistons, and Housings {3030, 3050, 3169, 3170, 3190}
Test Specifications for Vane Cartridges{0784, 5058, 5070}
Test Specifications for Vane Cartridges{0784, 5058, 5070}
Rim Inspection Guidelines {4202, 4209}
Rim Inspection Guidelines {4202, 4209}
Hose Inspection Form {0374, 0599, 5057, 5057}
Hose Inspection Form {0374, 0599, 5057, 5057}
Tool Operating Manual
Using the 198-4240 Digital Pressure Indicator Group{0599, 0738, 0788, 1000, 3000, 4000, 5000, 6000}
Using the 198-4240 Digital Pressure Indicator Group{0599, 0738, 0788, 1000, 3000, 4000, 5000, 6000}
226-2380 Multi-Purpose Lifting Bracket Group{3258, 4050, 4084, 4208, 7561}
226-2380 Multi-Purpose Lifting Bracket Group{3258, 4050, 4084, 4208, 7561}
142-1664 Adjustable Lifting Bracket Group{0599, 0629, 0700, 0729, 0757, 1122}
142-1664 Adjustable Lifting Bracket Group{0599, 0629, 0700, 0729, 0757, 1122}
Base-Mounted Recirculating Parts Washers{0374, 0599, 0680, 0699, 0700}
Base-Mounted Recirculating Parts Washers{0374, 0599, 0680, 0699, 0700}
362-0960 Lifting Beam Assembly {0599, 0629, 0700, 0729, 0757, 1122}
362-0960 Lifting Beam Assembly {0599, 0629, 0700, 0729, 0757, 1122}
149-7173 Bearing Handling Bracket Assembly {0374, 0599, 0629, 0632, 4006, 4008, 7551}
149-7173 Bearing Handling Bracket Assembly {0374, 0599, 0629, 0632, 4006, 4008, 7551}
<NOBR>439-3938</NOBR>, <NOBR>439-3939</NOBR>, <NOBR>439-3940</NOBR>, <NOBR>439-3941</NOBR>, <NOBR>439-3942</NOBR>, <NOBR>439-3943</NOBR> Link Bracket Assemblies {0374, 0599, 0632, 0700, 7000}
439-3938, 439-3939, 439-3940, 439-3941, 439-3942, 439-3943 Link Bracket Assemblies {0374, 0599, 0632, 0700, 7000}
127-8458 Final Drive Disassembly and Assembly Bench {0374, 0599, 0722, 0727}
127-8458 Final Drive Disassembly and Assembly Bench {0374, 0599, 0722, 0727}
146-1738 Precision Borescope (Hawkeye){0599, 0614, 0644, 0701, 0706, 0708, 0727, 0738}
146-1738 Precision Borescope (Hawkeye){0599, 0614, 0644, 0701, 0706, 0708, 0727, 0738}
TT5000 to TT7000 Torque Turn Wrench Conversion{0374, 0599, 0602, 0677, 79NY}
TT5000 to TT7000 Torque Turn Wrench Conversion{0374, 0599, 0602, 0677, 79NY}
420-2048 Adjustable C-Frame Assembly{0629, 0632, 0738, 4000, 5050, 7000}
420-2048 Adjustable C-Frame Assembly{0629, 0632, 0738, 4000, 5050, 7000}
HVOF Identifier 396-9342 Group{0599, 0669, 0679, 7000}
HVOF Identifier 396-9342 Group{0599, 0669, 0679, 7000}
4-Inch Radial Hose Machine{0374, 0599, 0684, 0738, 5057}
4-Inch Radial Hose Machine{0374, 0599, 0684, 0738, 5057}
142-6893 Adjustable Lifting Bracket Group{0599, 0629, 0632, 0701, 0717, 1000, 4000, 7000}
142-6893 Adjustable Lifting Bracket Group{0599, 0629, 0632, 0701, 0717, 1000, 4000, 7000}
226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561}
226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561}
Procedures for Using the 212-1503 Portable Parts Washer{0374, 0599, 0680, 0699, 0700}
Procedures for Using the 212-1503 Portable Parts Washer{0374, 0599, 0680, 0699, 0700}
Using the 223-2105 Hose Cutting Machine{0374, 0599, 0678, 0684, 0708, 0738, 5057, 6060}
Using the 223-2105 Hose Cutting Machine{0374, 0599, 0678, 0684, 0708, 0738, 5057, 6060}
Crimping XT-3 ES and XT-5 S4G, MCSH, and MCSX Couplings Using 4C-3660, 4C-5052, 4C-5053, 9U-5792, or 9U-7261 Hose Machines{0374, 0599, 0684, 0738, 5057}
Crimping XT-3 ES and XT-5 S4G, MCSH, and MCSX Couplings Using 4C-3660, 4C-5052, 4C-5053, 9U-5792, or 9U-7261 Hose Machines{0374, 0599, 0684, 0738, 5057}
243-0765 Bench Model Hose Machine For Use With the 242-3567 Variable Crimp Die Bowl{0374, 0599, 0684, 0738, 5057}
243-0765 Bench Model Hose Machine For Use With the 242-3567 Variable Crimp Die Bowl{0374, 0599, 0684, 0738, 5057}
193-4124 Rear Wheel Bearing Preload Adjuster for 793 Off-Highway Trucks{0374, 0599, 0700, 0722, 0727, 0731}
193-4124 Rear Wheel Bearing Preload Adjuster for 793 Off-Highway Trucks{0374, 0599, 0700, 0722, 0727, 0731}
396-6461 Tube Assembly{0374, 0599, 0632, 3030, 3258}
396-6461 Tube Assembly{0374, 0599, 0632, 3030, 3258}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
456-4449 Support Device{0374, 0599, 0629, 0632, 0700}
456-4449 Support Device{0374, 0599, 0629, 0632, 0700}
Installing 457-6030 (C3-290 Controller) on Hose Crimping Machines 233-8048, 286-4354, 286-4355, 275-6199, 286-4353, and 233-8038{0374, 0599, 0684, 0700, 0738, 5057}
Installing 457-6030 (C3-290 Controller) on Hose Crimping Machines 233-8048, 286-4354, 286-4355, 275-6199, 286-4353, and 233-8038{0374, 0599, 0684, 0700, 0738, 5057}
442-1750 Lifting Plate{0374, 0599, 0629, 0632, 0700, 1122}
442-1750 Lifting Plate{0374, 0599, 0629, 0632, 0700, 1122}
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
Base Mounted Recirculating Parts Washers {0374, 0599, 0680, 0699, 0700}
Base Mounted Recirculating Parts Washers {0374, 0599, 0680, 0699, 0700}
Reuse And Salvage Guidelines
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Procedure to Salvage the Slots for the Pin and Holes for the Reaction Dowel in Transmission Clutch Plates, Pistons, and Housings {3030, 3050, 3169, 3170, 3190}
Procedure to Salvage the Slots for the Pin and Holes for the Reaction Dowel in Transmission Clutch Plates, Pistons, and Housings {3030, 3050, 3169, 3170, 3190}
Contamination Control Guidelines
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Bench Test Procedures
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Service Magazine
Extraction Tools For &quot;Live Oil Sampling&quot;{7770,0770,0781,0783,0784}
1988/04/18
Installation Of Valves For Live Oil Sampling{7770,0770,0781,0783,0784}
1988/06/06
Self-contained Filter Cart Evacuates Oil, Filters Oil and Refills System {0727}
2004/02/16
Single Purpose Fluid Sampling Valves and Dual Purpose Fluid Sampling Valves Require Different Quick Connect Couplers {0645, 7542}
2004/11/29
Portable Test and Fill Machine Designed for a Service Vehicle but Works Fast Enough for the Shop {0768}
2006/02/27
Spanner Wrench is Available for Ecology Drain Valves {1302, 1353, 1372, 5076, 5613}
2006/03/20
Specifications
Torque Divider
D7G Track-Type Tractor Power Train
Reuse And Salvage Guidelines
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Salvage of Center Bearing in Torque Converter Input Housing {3101, 3127}
Salvage of Center Bearing in Torque Converter Input Housing {3101, 3127}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Cast Aluminum Stator Wheels for Torque Converters {3101, 3129}
Cast Aluminum Stator Wheels for Torque Converters {3101, 3129}
Repair of Pump Drive Gears for Torque Converters {3100, 3101}
Repair of Pump Drive Gears for Torque Converters {3100, 3101}
Turbine Wheel for Torque Converters Used with Power Shift Transmissions {3101, 3131}
Turbine Wheel for Torque Converters Used with Power Shift Transmissions {3101, 3131}
Repair of Torque Converter Stator Wheels {3101, 3129}
Repair of Torque Converter Stator Wheels {3101, 3129}
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Repair of Transmission, Torque Converter, and Torque Divider Shafts {3000, 3063, 3100}
Repair of Transmission, Torque Converter, and Torque Divider Shafts {3000, 3063, 3100}
Output Flange for Torque Converters on D6, D7, D8, and D9 Track-Type Tractors {3100, 3101, 3128}
Output Flange for Torque Converters on D6, D7, D8, and D9 Track-Type Tractors {3100, 3101, 3128}
Thermal Spray Procedures for Torque Converter Output Flange {0679, 3101}
Thermal Spray Procedures for Torque Converter Output Flange {0679, 3101}
Thermal Spray Procedures for Torque Converter Carrier - Bearing Diameter {0679, 3101, 3135}
Thermal Spray Procedures for Torque Converter Carrier - Bearing Diameter {0679, 3101, 3135}
Thermal Spray Procedures for Pump Gear Drive Inside Diameter{0374, 0599, 0679, 3101}
Thermal Spray Procedures for Pump Gear Drive Inside Diameter{0374, 0599, 0679, 3101}
Thermal Spray Procedures for Torque Converter Turbine Wheel {0679, 3101, 3131}
Thermal Spray Procedures for Torque Converter Turbine Wheel {0679, 3101, 3131}
Thermal Spray Procedures for Torque Converter Impeller {0679, 3101, 3134}
Thermal Spray Procedures for Torque Converter Impeller {0679, 3101, 3134}
Thermal Spray Procedures for Transmission, Torque Converter and Torque Divider Shafts {0679, 0719, 3030, 3101, 3125, 3130}
Thermal Spray Procedures for Transmission, Torque Converter and Torque Divider Shafts {0679, 0719, 3030, 3101, 3125, 3130}
Thermal Spray Procedures for Torque Converter Carrier - Seal Ring Bore {0374, 0599, 0679, 3101, 3135}
Thermal Spray Procedures for Torque Converter Carrier - Seal Ring Bore {0374, 0599, 0679, 3101, 3135}
Thermal Spray Procedures for Torque Converter Input Housing {0679, 3101, 3127}
Thermal Spray Procedures for Torque Converter Input Housing {0679, 3101, 3127}
Thermal Spray Procedures for Transmission and Torque Converter Yokes {0599, 0679, 3001, 3030, 3101, 3160}
Thermal Spray Procedures for Transmission and Torque Converter Yokes {0599, 0679, 3001, 3030, 3101, 3160}
Thermal Spray Procedures for Torque Converter Flange - Bearing Diameter {0679, 3101}
Thermal Spray Procedures for Torque Converter Flange - Bearing Diameter {0679, 3101}
Bench Test Procedures
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Disassembly and Assembly
Torque Converter Outlet Relief Valve
D7G TRACTOR POWER TRAIN
Service Magazine
Clearances in the Torque Converter Are Changed {3101}
2000/11/27
Recommendations for Rebuilding Torque Converter Freewheel Stators on All Cat Products {3101, 3129}
2013/03/21
Reuse And Salvage Guidelines
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Repair of Transmission, Torque Converter, and Torque Divider Shafts {3000, 3063, 3100}
Repair of Transmission, Torque Converter, and Torque Divider Shafts {3000, 3063, 3100}
Thermal Spray Procedures for Transmission, Torque Converter and Torque Divider Shafts {0679, 0719, 3030, 3101, 3125, 3130}
Thermal Spray Procedures for Transmission, Torque Converter and Torque Divider Shafts {0679, 0719, 3030, 3101, 3125, 3130}
Thermal Spray Procedures for Transmission and Torque Converter Yokes {0599, 0679, 3001, 3030, 3101, 3160}
Thermal Spray Procedures for Transmission and Torque Converter Yokes {0599, 0679, 3001, 3030, 3101, 3160}
Disassembly and Assembly
Torque Divider Scavenge Pump
D7G TRACTOR POWER TRAIN
Torque Divider
D7G TRACTOR POWER TRAIN
Service Magazine
Recommendations for Rebuilding Torque Converter Freewheel Stators on All Cat Products {3101, 3129}
2013/03/21
Special Instruction
Procedure to Salvage the Slots for the Pin and Holes for the Reaction Dowel in Transmission Clutch Plates, Pistons, and Housings {3030, 3050, 3169, 3170, 3190}
Procedure to Salvage the Slots for the Pin and Holes for the Reaction Dowel in Transmission Clutch Plates, Pistons, and Housings {3030, 3050, 3169, 3170, 3190}
Technical Information Bulletin
Transmission Charge Pump Centerbodies Can Be Modified To Improve The Life Of Pumps With 8-Tooth, Powder Metal Gears
Transmission Charge Pump Centerbodies Can Be Modified To Improve The Life Of Pumps With 8-Tooth, Powder Metal Gears
Specifications
Transmission - Power Shift
D7G Track-Type Tractor Power Train
Tool Operating Manual
396-6461 Tube Assembly{0374, 0599, 0632, 3030, 3258}
396-6461 Tube Assembly{0374, 0599, 0632, 3030, 3258}
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
Reuse And Salvage Guidelines
Procedure to Salvage the Slots for the Pin and Holes for the Reaction Dowel in Transmission Clutch Plates, Pistons, and Housings {3030, 3050, 3169, 3170, 3190}
Procedure to Salvage the Slots for the Pin and Holes for the Reaction Dowel in Transmission Clutch Plates, Pistons, and Housings {3030, 3050, 3169, 3170, 3190}
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Identification of Non-Metallic Discs that are Used in Power Shift Transmissions {3030, 3155}
Identification of Non-Metallic Discs that are Used in Power Shift Transmissions {3030, 3155}
Transmission Clutch Plates and Disc Assemblies with Cellulose Friction Material {3030, 3155, 3190}
Transmission Clutch Plates and Disc Assemblies with Cellulose Friction Material {3030, 3155, 3190}
Transmission Clutch Plates and Disc Assemblies with Sintered Bronze Friction Material {3030, 3155, 3190}
Transmission Clutch Plates and Disc Assemblies with Sintered Bronze Friction Material {3030, 3155, 3190}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Identification and Applications of Transmission Clutch Plates and Specifications to Machine Reaction Faces for Power Shift Transmissions {3054, 3155, 3160, 3190}
Identification and Applications of Transmission Clutch Plates and Specifications to Machine Reaction Faces for Power Shift Transmissions {3054, 3155, 3160, 3190}
Transmission Reuse and Salvage Manual Contents {0374, 3030}
Transmission Reuse and Salvage Manual Contents {0374, 3030}
Clutch Ring Gears For All Power Shift Transmissions {3030, 3155}
Clutch Ring Gears For All Power Shift Transmissions {3030, 3155}
Procedure to Salvage Tang Slots on Transmission and Brake Pistons {0679, 3160, 4011, 4251}
Procedure to Salvage Tang Slots on Transmission and Brake Pistons {0679, 3160, 4011, 4251}
Repair of Transmission, Torque Converter, and Torque Divider Shafts {3000, 3063, 3100}
Repair of Transmission, Torque Converter, and Torque Divider Shafts {3000, 3063, 3100}
Reuse and Salvage of Transmission Components {3030}
Reuse and Salvage of Transmission Components {3030}
Procedure to Machine Damaged Transmission and Differential Yokes {3030, 3253, 3258}
Procedure to Machine Damaged Transmission and Differential Yokes {3030, 3253, 3258}
Procedures to Salvage Thrust Faces on Planetary Carriers {3160, 4050, 4051, 4093}
Procedures to Salvage Thrust Faces on Planetary Carriers {3160, 4050, 4051, 4093}
Repair of Reaction Dowel Holes in Transmission Clutch Housings {3030, 3155, 3169}
Repair of Reaction Dowel Holes in Transmission Clutch Housings {3030, 3155, 3169}
Thermal Spray Procedures for Clutch Housing Piston Bore {0679, 3160, 3169}
Thermal Spray Procedures for Clutch Housing Piston Bore {0679, 3160, 3169}
Thermal Spray Procedures for Clutch Piston Inside Diameter {0679, 3160, 3170}
Thermal Spray Procedures for Clutch Piston Inside Diameter {0679, 3160, 3170}
Thermal Spray Procedures for Transmission, Torque Converter and Torque Divider Shafts {0679, 0719, 3030, 3101, 3125, 3130}
Thermal Spray Procedures for Transmission, Torque Converter and Torque Divider Shafts {0679, 0719, 3030, 3101, 3125, 3130}
Thermal Spray Procedures for Transmission and Torque Converter Yokes {0599, 0679, 3001, 3030, 3101, 3160}
Thermal Spray Procedures for Transmission and Torque Converter Yokes {0599, 0679, 3001, 3030, 3101, 3160}
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Testing and Adjusting
Testing And Adjusting
D7G POWER SHIFT TRANSMISSION
Power Shift Transmission Testing And Adjusting
D7G TRACTOR POWER SHIFT TRANSMISSION TESTING & ADJUSTING
Bench Test Procedures
Bench Test Procedure for a D7F, D7G Track-Type Tractor, 571G, and 572G Pipelayer Transmission{3030, 3073}
Bench Test Procedure for a D7F, D7G Track-Type Tractor, 571G, and 572G Pipelayer Transmission{3030, 3073}
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Disassembly and Assembly
Rear Bottom Guard
D7G TRACTOR POWER TRAIN
Universal Joint, Transmission Oil Pump
D7G TRACTOR POWER TRAIN
Transmission Oil Pump (Power Shift)
D7G TRACTOR POWER TRAIN
Transmission Oil Pump (Direct Drive)
D7G TRACTOR POWER TRAIN
Transmission Oil Pump (Power Shift)
D7G TRACTOR POWER TRAIN
Transmission Oil Pump (Direct Drive)
D7G TRACTOR POWER TRAIN
Transmission And Transfer Gears (Power Shift Without Cab)
D7G TRACTOR POWER TRAIN
Transmission Hydraulic Control Valves
D7G TRACTOR POWER TRAIN
Transmission Hydraulic Control Valves (Earlier)
D7G TRACTOR POWER TRAIN
Transmission Hydraulic Control Valves (Later)
D7G TRACTOR POWER TRAIN
Transmission (Direct Drive)
D7G TRACTOR POWER TRAIN
Transmission And Steering Clutch Oil Filter
D7G TRACTOR POWER TRAIN
Service Magazine
Green Dye (Color) Added To Transmission Oil For Easier Identification Of Leaks{3004,3067,3179}
1981/01/19
Locks Removed From Rear Carrier In Planetary Group{3176,3150}
1981/05/18
Instrument Panel Guards Prevent Vandalism (Damage) To Machines{7315}
1982/09/20
New Flow Control Valve Group Improves System Pressure Stability{3150}
1977/01/17
Improved 5P3000 Engine And Transmission Shipping Stand Assembly; Modification Available For Stands Already In Use{0640}
1977/04/25
New Powershift Transmission Arrangement Has Improved Reverse Clutch Operation{3150,3155,3170}
1977/08/22
New Spring Used In Valve Group For Transmission Pressure Control{3152}
1977/09/05
Use Correct Procedure To Install The Studs Used To Hold The Transmission{3050,3100,3150}
1978/04/03
The Special Breathers For The Bevel Gear Case And The Final Drive Cases Have Been Removed-A Common Breather For These Systems Is Now Located On The Transmission Oil Filler Spout{4059,4070,3179,3067}
1978/04/24
Revision Of Recommendations For Temporary Increases In Transmission Oil Level During Operation On Severe (High Angle) Slopes{4059,3067,3179}
1979/12/10
Lock Removed From Front Timing Gear Group To Help Prevent Loss Of Tightening Torque {1206}
1993/06/14
Portable Test and Fill Machine Designed for a Service Vehicle but Works Fast Enough for the Shop {0768}
2006/02/27
Spanner Wrench is Available for Ecology Drain Valves {1302, 1353, 1372, 5076, 5613}
2006/03/20
Improved Registration Process for Retrofit Products {1000, 3000, 7000, 7570}
2011/02/17
A New Friction Disc For D6G and D7G Is Now Available {3160}
2012/10/03
Disassembly and Assembly
Transmission Hydraulic Control Valves
D7G TRACTOR POWER TRAIN
Transmission Hydraulic Control Valves (Earlier)
D7G TRACTOR POWER TRAIN
Transmission Hydraulic Control Valves (Later)
D7G TRACTOR POWER TRAIN
Service Magazine
New Spring Used In Valve Group For Transmission Pressure Control{3152}
1977/09/05
Truck Engine News
Single Purpose Fluid Sampling Valves and Dual Purpose Fluid Sampling Valves Require Different Quick Connect Couplers {0645, 7542}
2004/11/29
Engine News
Contamination Control Guidelines
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Service Magazine
Color Coded Dust Caps for S&middot;O&middot;S Ports Will Be Available {7770}
2003/12/01
243-3133 Quick Connect Coupler (Fluid Sampling) Provides A Coupler for Portable Particle Analyzers {0707, 0717, 0731, 0732, 0738}
2004/07/01
Single Purpose Fluid Sampling Valves and Dual Purpose Fluid Sampling Valves Require Different Quick Connect Couplers {0645, 7542}
2004/11/29
Special Instruction
Installation Of 173 Hydraulic Control (28A, 20C){5051}
Installation Of 173 Hydraulic Control (28A, 20C){5051}
Installation of 8P7790 Pressure Control Valve{3152}
Installation of 8P7790 Pressure Control Valve{3152}
Specifications
Transmission Selector and Pressure Control Valve - Power Shift
D7G Track-Type Tractor Power Train
Disassembly and Assembly
Pressure Control Valve
D7G TRACTOR POWER TRAIN
Service Magazine
New Spring Used In Valve Group For Transmission Pressure Control{3152}
1977/09/05
Special Instruction
Installation of 3P7665 Relief Valve Group{3100}
Installation of 3P7665 Relief Valve Group{3100}
Specifications
Relief Valve (Torque Converter Outlet) - Power Shift
D7G Track-Type Tractor Power Train
Reuse And Salvage Guidelines
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Bench Test Procedures
Disassembly and Assembly
Brake Cooling And Lubrication Relief Valve
D7G TRACTOR POWER TRAIN
Torque Converter Outlet Relief Valve
D7G TRACTOR POWER TRAIN
Sequence Relief Valve
D7G TRACTOR POWER TRAIN
Specifications
Transmission Selector and Pressure Control Valve - Power Shift
D7G Track-Type Tractor Power Train
Sequence Relief Valve
D7G Track-Type Tractor Power Train
Bench Test Procedures
Bench Test Procedure for a D7F, D7G Track-Type Tractor, 571G, and 572G Pipelayer Transmission{3030, 3073}
Bench Test Procedure for a D7F, D7G Track-Type Tractor, 571G, and 572G Pipelayer Transmission{3030, 3073}
Disassembly and Assembly
Transmission Hydraulic Control Valves
D7G TRACTOR POWER TRAIN
Transmission Hydraulic Control Valves (Earlier)
D7G TRACTOR POWER TRAIN
Transmission Hydraulic Control Valves (Later)
D7G TRACTOR POWER TRAIN
Special Instruction
Inspection of the Duo-cone Seal Gp{4050, 4051, 7561}
Inspection of the Duo-cone Seal Gp{4050, 4051, 7561}
Tool Operating Manual
149-7173 Bearing Handling Bracket Assembly {0374, 0599, 0629, 0632, 4006, 4008, 7551}
149-7173 Bearing Handling Bracket Assembly {0374, 0599, 0629, 0632, 4006, 4008, 7551}
193-4124 Rear Wheel Bearing Preload Adjuster for 793 Off-Highway Trucks{0374, 0599, 0700, 0722, 0727, 0731}
193-4124 Rear Wheel Bearing Preload Adjuster for 793 Off-Highway Trucks{0374, 0599, 0700, 0722, 0727, 0731}
Reuse And Salvage Guidelines
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Procedures to Salvage Thrust Faces on Planetary Carriers {3160, 4050, 4051, 4093}
Procedures to Salvage Thrust Faces on Planetary Carriers {3160, 4050, 4051, 4093}
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Service Magazine
Determining the Severity of a Leak of the Duo-cone Seal Gp {4050, 4051, 7561}
2010/02/25
Special Instruction
Inspection of the Duo-cone Seal Gp{4050, 4051, 7561}
Inspection of the Duo-cone Seal Gp{4050, 4051, 7561}
Installation Guide for the Tire Monitoring System on Cat<SUP>&reg;</SUP> and Non-Cat Equipment {4203, 7490}
Installation Guide for the Tire Monitoring System on Cat® and Non-Cat Equipment {4203, 7490}
Rim Inspection Guidelines {4202, 4209}
Rim Inspection Guidelines {4202, 4209}
Tool Operating Manual
149-7173 Bearing Handling Bracket Assembly {0374, 0599, 0629, 0632, 4006, 4008, 7551}
149-7173 Bearing Handling Bracket Assembly {0374, 0599, 0629, 0632, 4006, 4008, 7551}
226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561}
226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561}
193-4124 Rear Wheel Bearing Preload Adjuster for 793 Off-Highway Trucks{0374, 0599, 0700, 0722, 0727, 0731}
193-4124 Rear Wheel Bearing Preload Adjuster for 793 Off-Highway Trucks{0374, 0599, 0700, 0722, 0727, 0731}
Reuse And Salvage Guidelines
Procedures to Salvage Thrust Faces on Planetary Carriers {3160, 4050, 4051, 4093}
Procedures to Salvage Thrust Faces on Planetary Carriers {3160, 4050, 4051, 4093}
Service Magazine
Determining the Severity of a Leak of the Duo-cone Seal Gp {4050, 4051, 7561}
2010/02/25
Reuse And Salvage Guidelines
Procedure to Machine Damaged Transmission and Differential Yokes {3030, 3253, 3258}
Procedure to Machine Damaged Transmission and Differential Yokes {3030, 3253, 3258}
Thermal Spray Procedures for Transmission and Torque Converter Yokes {0599, 0679, 3001, 3030, 3101, 3160}
Thermal Spray Procedures for Transmission and Torque Converter Yokes {0599, 0679, 3001, 3030, 3101, 3160}
Disassembly and Assembly
Engine Oil Cooler
3306 VEHICULAR ENGINE FOR D7G TRACTOR
Service Magazine
Field Repair Of Cooler Cores Made Of Aluminium{1063,1374,1375}
1977/09/05
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Reuse And Salvage Guidelines
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Special Instruction
Assembly and Installation of Conventional Duo-Cone Seals{7561, 7561}
Assembly and Installation of Conventional Duo-Cone Seals{7561, 7561}
Installation of Conventional Duo-Cone Seals{7561}
Installation of Conventional Duo-Cone Seals{7561}
Installation of Inverted Duo-Cone Seals{7561}
Installation of Inverted Duo-Cone Seals{7561}
Inspection of the Duo-cone Seal Gp{4050, 4051, 7561}
Inspection of the Duo-cone Seal Gp{4050, 4051, 7561}
Specifications
Final Drive
D7G Track-Type Tractor Power Train
Tool Operating Manual
226-2380 Multi-Purpose Lifting Bracket Group{3258, 4050, 4084, 4208, 7561}
226-2380 Multi-Purpose Lifting Bracket Group{3258, 4050, 4084, 4208, 7561}
149-7173 Bearing Handling Bracket Assembly {0374, 0599, 0629, 0632, 4006, 4008, 7551}
149-7173 Bearing Handling Bracket Assembly {0374, 0599, 0629, 0632, 4006, 4008, 7551}
127-8458 Final Drive Disassembly and Assembly Bench {0374, 0599, 0722, 0727}
127-8458 Final Drive Disassembly and Assembly Bench {0374, 0599, 0722, 0727}
226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561}
226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561}
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
Reuse And Salvage Guidelines
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Reusability of Planetary Final Drive Components for Track-Type Tractors {4050, 4084, 4092}
Reusability of Planetary Final Drive Components for Track-Type Tractors {4050, 4084, 4092}
Salvage of Final Drive Sprocket Hubs For Pipelayers, Track Loaders, and Track-Type Tractors {4050, 4184}
Salvage of Final Drive Sprocket Hubs For Pipelayers, Track Loaders, and Track-Type Tractors {4050, 4184}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Final Drive Steering System, Wheel Braking System, and Wheels & Tires Salvage and Reuse Manual Contents {4000, 4050, 4100, 4250, 4300}
Final Drive Steering System, Wheel Braking System, and Wheels & Tires Salvage and Reuse Manual Contents {4000, 4050, 4100, 4250, 4300}
Conventional (Non-Planetary) Final Drive Gears for Track Type Tractors and Track Type Loaders {4055, 7552}
Conventional (Non-Planetary) Final Drive Gears for Track Type Tractors and Track Type Loaders {4055, 7552}
Brake Drums for Track-Type Tractors and Loaders{4050, 4252}
Brake Drums for Track-Type Tractors and Loaders{4050, 4252}
Procedures to Salvage Thrust Faces on Planetary Carriers {3160, 4050, 4051, 4093}
Procedures to Salvage Thrust Faces on Planetary Carriers {3160, 4050, 4051, 4093}
Thermal Spray Procedures for TTT Sprocket Hub Bearing Bores {0374, 0599, 0679, 4050}
Thermal Spray Procedures for TTT Sprocket Hub Bearing Bores {0374, 0599, 0679, 4050}
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Disassembly and Assembly
Final Drive Cases, Gears, Idler Pinions And Bearings
D7G TRACTOR POWER TRAIN
Adjustment For The Final Drive Bearings
D7G TRACTOR POWER TRAIN
Final Drive Pinions And Flanges
D7G TRACTOR POWER TRAIN
Service Magazine
Improved Lubrication Of Final Drive Bearing{4059,4070}
1984/10/15
New 6V3094 Adapter Is Available For Installation Of Final Drive Pinion Flanges {0620,4057}
1985/01/14
Improved Seal For Oil Compartment For Final Drive Oscillation Bearing{4066}
1987/05/04
The Special Breathers For The Bevel Gear Case And The Final Drive Cases Have Been Removed-A Common Breather For These Systems Is Now Located On The Transmission Oil Filler Spout{4059,4070,3179,3067}
1978/04/24
Magnetic Plug Gives A Visual Indication Of Possible Final Drive Damage{4059}
1978/09/25
Hardened Dowels Now Used In Brake Hydraulic Mechanism Group{4059,4115}
1978/10/09
Cast Ring Duo-Cone Seal Groups Available For Parts Service{7561}
1988/05/23
Hardened Washers And Increased Bolt Torque Keep Guards Tight On Bottom Of Final Drive Cases{4059}
1979/03/26
Sawcut Removed From Bearing Holder Assembly In Final Drive Group{4066}
1979/10/22
Revision Of Recommendations For Temporary Increases In Transmission Oil Level During Operation On Severe (High Angle) Slopes{4059,3067,3179}
1979/12/10
Self-contained Filter Cart Evacuates Oil, Filters Oil and Refills System {0727}
2004/02/16
Product Information Guide, SEBF1015, "Improving Component Durability" , "Final Drives and Differentials" is now available {3258, 3282, 4050}
2004/04/12
Final Drive Duo-Cone Seal Assembly Information Update {7561}
2010/04/15
Determining the Severity of a Leak of the Duo-cone Seal Gp {4050, 4051, 7561}
2010/02/25

Truck sale:

Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.