D7G TRACTOR / POWERSHIFT / 92V00001-02126 (MACHINE) SERVICE EQUIPMENT AND SUPPLIES Caterpillar SIS

Special Instruction

Installation Of 8N628 Bearing{7551, 1253}
Installation Of 8N628 Bearing{7551, 1253}

Installation Of Crankshaft Seals And Wear Sleeves{1203}
Installation Of Crankshaft Seals And Wear Sleeves{1203}

Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}

Technical Information Bulletin

Connecting Rod Bearings
Connecting Rod Bearings

Disassembly and Assembly

Connecting Rod Bearings
3306 VEHICULAR ENGINE FOR D7G TRACTOR

Crankshaft Main Bearings
3306 VEHICULAR ENGINE FOR D7G TRACTOR

Camshaft Bearings
3306 VEHICULAR ENGINE FOR D7G TRACTOR

Service Magazine

6V2050 Tapered Rod Tool Group Available For Removal And Installation Of Bearings{1219,1218,1214}
1980/06/09

Inspection Marks On Bearings{7551,1230,1226,1203,1219,1227}
1982/05/03

New Bearing Standard: Quantity Of One Part Number Now Has Both Halves Of The Bearing{7551}
1982/08/09

Reuse Of Engine Bearings{1230}
1983/05/16

Reuse Of Engine Bearings{1230,1219,1203}
1983/11/21

New Connecting Rod And Main Bearings Used{1230,1219,1203}
1984/03/26

Installing New Copper Bonded Bearings Can Extend Engine Life{1230,1203,1219}
1985/04/29

Bearing Failures On Engines Due To Lack Of Lubrication{1230,1219,1203,1202}
1986/09/08

Use Only Paint To Mark Connecting Rod Caps For Torque-Turn Method {1218,1219}
1987/06/01

Use New Main Bearings In Replacement Cylinder Blocks{1203,1201}
1978/06/12

Change In Procedure To Check Main Bearing Clearance{1203}
1978/08/28

New Centering Rings For Oversized Main Bearings{0665,1230}
1979/06/04

New Specification For Installation Of Camshaft Front Bearing In Cylinder Block{1211}
1979/06/11

Remanufactured Camshafts And Cam Kits Available For Parts Service{1210,1211,1212}
1990/12/17

Special Instruction

2W725 Turbocharger Cartridge Repair Kit{1053}
2W725 Turbocharger Cartridge Repair Kit{1053}

7W4872 Turbocharger Cartridge Repair Kit{1053}
7W4872 Turbocharger Cartridge Repair Kit{1053}

Specifications

Turbocharger Impeller Installation (Schwitzer Only)
3306 VEHICULAR ENGINE FOR D5B, D6D & D7G TRACTORS

Service Magazine

Use Care When Handling Turbocharger Compressor Wheels{1052,1077}
1985/12/16

Special Instructions Packaged With Turbocharger Cartridge Repair Kits May Be Incorrect{1053}
1986/02/03

Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02

Changes To Retainer Nut Torque And Assembly Procedures For Turbocharger Compressor Wheels{0374,1052}
1977/02/28

Correct Rebuild Kits Must Be Used For Repair Of Earlier And Later Water Pumps{1361}
1977/06/27

Add Chamfer To Cartridge Assembly Bearings To Prevent Oil Leakage{1052,1053}
1977/11/21

Oversize Bearings For Turbocharger Center Housings Available {1053,1052}
1987/03/30

Stop Engine If There Is A Turbocharger Bearing Failure{1052,1318}
1987/04/06

Silicone Grease Now Used In Seal Ring Groove In Turbochargers{1052,1053,1077}
1978/05/15

Use Of 9S3265 Retaining Compound On Schwitzer Turbocharger Compressor Wheel Retainer Nuts{1052,1053}
1979/06/25

Turbocharger Bearings Are Now Available In More Different Sizes For Better Turbocharger Reconditioning{1053}
1979/08/20

Only One Dowel Pin Is Now Used To Hold The Thrust Bearing In The Correct Position{1053,1052}
1979/09/03

6V2055 High Vacuum Grease Gives Better Oil Seal {1052,1053,1077,0682}
1979/09/10

Different Thrust Bearing And Thrust Rings Now Used In Turbochargers{1052,1053}
1979/10/22

Improved Analysis of Non-Warrantable Failures for Reman Vane Cartridges {5055}
2004/07/05

Special Instruction

Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}

Battery Ratings And Cross Reference Chart{1401}
Battery Ratings And Cross Reference Chart{1401}

Technical Information Bulletin

Updating the Certification Label for China{7557}
Updating the Certification Label for China{7557}

Roll Over Protective Structure and Falling Object Protective Structure Identification Film Retention{7000, 7405, 7557}
Roll Over Protective Structure and Falling Object Protective Structure Identification Film Retention{7000, 7405, 7557}

Specifications

V-Belt Tension Chart
3306 VEHICULAR ENGINE FOR D5B, D6D & D7G TRACTORS

V-Belt Tension Chart
3306 DIRECT INJECTION VEHICULAR ENGINE WITH NEW SCROLL FUEL

Service Magazine

Lubricant Recommendations Changed For All Caterpillar Engines To Combat Effects Of Fuel Sulfur{1318,0375,0374,1280}
1982/05/03

Separate Valve Stem Gauges Available{0653,1000}
1982/06/07

New Fuel Nozzle Test Sheet Available{0651,1254}
1982/10/04

Reference Chart for Engine Improvements{0374,1000}
1982/10/25

Reference Chart For Service Magazine Articles On Improvements To All 3300 Series Engines{0374}
1983/06/06

Voltage Regulator Cross Reference Chart{1410,1405}
1985/07/01

Engine Information Plate Contains More Data; Use Of Performance Specifications{1250,7557}
1985/10/28

Polarity Connections And Use Of Service Meter Films When Service Meter Kits Are Installed{7480,7000}
1987/02/16

Use Only Paint To Mark Connecting Rod Caps For Torque-Turn Method {1218,1219}
1987/06/01

Current Chart For Dynamometer Adapters{0651,1000}
1979/01/22

Check Crankshaft Seals During Installation Of Engine Overhaul Gasket Kits; Add A Wear Sleeve When Needed{7555,7558,1161}
1979/06/04

Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27

New Engine Wall Charts Give Maintenance Management Recommendations{0374,0375,7500,7557,7580}
1989/03/06

Improved Seals Used; Seal Replacement In Folded Core Radiators{1353}
1990/06/04

Updated List Of Charts And Decals Available For Lubrication And Maintenance Intervals{0374,0375,7500,7557,7581}
1990/08/06

Updated List Of Charts And Decals Available For Lubrication And Maintenance Intervals{0374,0375,7557}
1994/04/04

Lubricant Will Ease Installation Of Secondary Radial Seal Air Filter Element {1054}
1994/04/25

Tamper Resistant Plugs And Tamper Resistant Bolts Used To Prevent Changes To Fuel Ratio Control (FRC) Setting{1278,1287}
1996/01/22

3306 (08Z) Machine Engine Serial Number Range Exhausted {1000,7557}
1997/06/30

Service Charts and Decals Available {0374, 0375, 7405, 7557}
2000/03/06

New Seventeen Character Product Identification Number (PIN) {7557}
2001/03/19

Ordering a Replacement Machine Identification Plate {7405, 7557}
Ordering a Replacement Machine Identification Plate {7405, 7557}

New ROPS Films, FOPS Films and TOPS Films Have Been Designed {7557}
2005/05/23

Ordering a Replacement Operator Protective Structure (OPS) Certification Film {7323, 7325, 7405, 7557}
2009/04/20

Improved Procedure for the Retention of the Identification Film for the Roll Over Protective Structure (ROPS) and Falling Object Protective Structure (FOPS) {7323, 7325, 7405, 7557}
2009/07/27

Special Instruction

Guidelines for the Use of Clean Out Filters for the Hydraulic Oil System and for the Power Train Oil System{3067, 5068}
Guidelines for the Use of Clean Out Filters for the Hydraulic Oil System and for the Power Train Oil System{3067, 5068}

Installation of Fuel/Water Separator{1260, 1263}
Installation of Fuel/Water Separator{1260, 1263}

Guidelines for the Use of High Efficiency Filters for the Hydraulic Oil System and for the Power Train Oil System {3000, 3004, 5050, 5068}
Guidelines for the Use of High Efficiency Filters for the Hydraulic Oil System and for the Power Train Oil System {3000, 3004, 5050, 5068}

Caterpillar Certified Procedure to Inspect and Clean Air Filters {1051, 1054}
Caterpillar Certified Procedure to Inspect and Clean Air Filters {1051, 1054}

Service Letter-NACD

The 2P4005 Lube Filter Needs To Be Removed From Dealer Inventory
The 2P4005 Lube Filter Needs To Be Removed From Dealer Inventory

Service Letter-Australia

Service Letter-CFEL

Service Letter-CSARL

Service Letter-Americas

Specifications

Air Cleaner
3306 VEHICULAR ENGINE FOR D5B, D6D & D7G TRACTORS

Primary Fuel Filter
3306 DIRECT INJECTION VEHICULAR ENGINE WITH NEW SCROLL FUEL

Fuel Priming Pump And Primary Fuel Filter
3306 DIRECT INJECTION VEHICULAR ENGINE WITH NEW SCROLL FUEL

Air Cleaner
3306 DIRECT INJECTION VEHICULAR ENGINE WITH NEW SCROLL FUEL

Hydraulic Tank And Filter 8J8778 (173 & 183), 8J8779 (193)
173, 183, 193 HYDRAULIC CONTROLS

Fuel Filter Base
3306C Engines for Caterpillar Built Machines

Fuel Filter (Primary)
3306C Engines for Caterpillar Built Machines

Fuel Priming Pump and Primary Fuel Filter
3306C Engines for Caterpillar Built Machines

Tool Operating Manual

295-0048 Bulk Fuel Filtration Group 300 GPM Flow Rate{0374, 0599, 0680, 0706, 1250, 1261, 1280}
295-0048 Bulk Fuel Filtration Group 300 GPM Flow Rate{0374, 0599, 0680, 0706, 1250, 1261, 1280}

Procedures for Using 9U-5971 and 173-9842 Filter Cart Group {0599, 0738, 5050, 5056, 5057, 5068, 5095, 7579}
Procedures for Using 9U-5971 and 173-9842 Filter Cart Group {0599, 0738, 5050, 5056, 5057, 5068, 5095, 7579}

188-3242 Filter Cart Group and 227-2479 Filter Cart Group{0374, 0599, 0680, 0738, 0768, 5050, 5056, 5095}
188-3242 Filter Cart Group and 227-2479 Filter Cart Group{0374, 0599, 0680, 0738, 0768, 5050, 5056, 5095}

20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}

Service Letter-China

The 2P4005 Lube Filter Needs To Be Removed From Dealer Inventory
The 2P4005 Lube Filter Needs To Be Removed From Dealer Inventory

Service Letter-Asia

Systems Operation

Cab Air Filters
Air Conditioning and Heating R-12 All Caterpillar Machines

Reuse And Salvage Guidelines

Caterpillar Certified Procedure to Inspect and Clean Air Filters {1051, 1054}
Caterpillar Certified Procedure to Inspect and Clean Air Filters {1051, 1054}

Contamination Control Guidelines

Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}

Service Letter-APD

The 2P4005 Lube Filter Needs To Be Removed From Dealer Inventory
The 2P4005 Lube Filter Needs To Be Removed From Dealer Inventory

Disassembly and Assembly

Hydraulic Filter
173, 183, 193 HYDRAULIC CONTROLS

Fuel Filter And Base
3306 VEHICULAR ENGINE FOR D7G TRACTOR

Oil Filter And Base (Earlier)
3306 VEHICULAR ENGINE FOR D7G TRACTOR

Oil Filter And Base (Later)
3306 VEHICULAR ENGINE FOR D7G TRACTOR

Engine Oil Cooler
3306 VEHICULAR ENGINE FOR D7G TRACTOR

Service Magazine

Improvements Made To Water Separator Groups{1263}
1980/05/05

New Oil Filter Base Has Larger Oil Passages; Some Bases Need Modification{1306}
1980/08/11

Green Dye (Color) Added To Transmission Oil For Easier Identification Of Leaks{3004,3067,3179}
1981/01/19

Engine Storage; Engine Start-Up After Storage{1000}
1982/02/22

Lubricant Recommendations Changed For All Caterpillar Engines To Combat Effects Of Fuel Sulfur{1318,0375,0374,1280}
1982/05/03

New Oil Additives Can Cause High Copper (Cu) Indications During S.O.S. Tests{0372,1318}
1982/09/27

New Oil Filter Base Assembly Used In Filter Base Group{1306}
1984/04/16

Improved Lubrication Of Final Drive Bearing{4059,4070}
1984/10/15

Oil Filter Inspection Can Save Additional Internal Engine Damage{1318}
1985/06/17

Canister Size Of Coolant Conditioner Element Has Changed{1350}
1985/11/25

Fuel Sulfur Analyzer Available{0651,1280,1318}
1986/01/13

Engine Oil Filter Element Has Metal Wrapper Instead Of Paper Wrapper{1318}
1986/03/10

Field Repair Of Cooler Cores Made Of Aluminium{1063,1374,1375}
1977/09/05

Water Separators Needed On Machines And Engines In The Field With SMFS{1250,0336}
1977/12/05

Stop Engine If There Is A Turbocharger Bearing Failure{1052,1318}
1987/04/06

The Special Breathers For The Bevel Gear Case And The Final Drive Cases Have Been Removed-A Common Breather For These Systems Is Now Located On The Transmission Oil Filler Spout{4059,4070,3179,3067}
1978/04/24

Improved Water Separator Element And Retaining Clamp Stops Fuel Leakage{1250}
1978/04/24

Water Separator Added To Give Protection To The Sleeve Metering Fuel System{1250}
1978/05/01

Do Not Use Plastic Tubing And Compression Fittings Without An Insert As A Fuel Supply Line{1274}
1978/06/26

Use Correct Procedure To Clean The Engine Lubrication System If Permanent Type Antifreeze (Ethylene Glycol) Is In The Engine{1318,1350}
1979/02/19

Fuel Filter Base With Check Valve Prevents High Fuel Pressure After The Engine Is Stopped{1262}
1979/03/05

New Larger Capacity Water Separator Is Available{1250}
1979/03/12

Sealant Now Used On Pipe Plugs At The Bottom Of The Oil Filter Base Assembly To Prevent Oil Leakage{1306}
1979/08/13

Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27

Fast Fuel Delivery Couplings And Fast Oil Change Couplings Are Available For All Caterpillar Equipment{0671,1273,1279,1325}
1979/10/08

Engine Oil Viscosity Changed To SAE 10W/30 For Shipment From All U.S. Factories{1318}
1979/10/15

Revision Of Recommendations For Temporary Increases In Transmission Oil Level During Operation On Severe (High Angle) Slopes{4059,3067,3179}
1979/12/10

Air Filter Maintenance{1051,1054}
1991/09/30

Light Green Gasket Material On Secondary Air Filter Elements May Stick To Filter Housing{1054,1051}
1992/02/10

Lubricant Will Ease Installation Of Secondary Radial Seal Air Filter Element {1054}
1994/04/25

Different Fuel Filter Available To Prevent Premature Wear On Fuel Injection Pump Plungers And Barrels{1261,1251}
1994/07/11

Exhaust Dust Ejector Operation{1055,1068}
1994/09/26

New Caterpillar High Efficiency Fuel Filters With STAY CLEAN VALVES® Replace All Standard Fuel Filters In February Of 1999 {1261}
1999/04/12

New Cab Air Filters Provide Improved Efficiency and Odor Reduction {7309, 7320, 7342}
2003/05/05

A Replacement Filter Is Incorrectly Identified {5050, 5068}
2002/12/23

New High Efficiency Oil Filters are Now Available {1308}
2004/03/22

New High Efficiency Oil Filters are Now Available {1308}
2006/08/21

Information that Improves the Service Life of the Remanufactured Air Conditioning Compressor {1357, 1358, 1397, 1802, 1805, 1809, 7320, 7342, 7343}
2008/03/10

New Oil Filters for all Cat Machines are Available {3004, 3067, 4295, 431F, 5068}
New Oil Filters for all Cat Machines are Available {3004, 3067, 4295, 431F, 5068}

Truck Engine News

The Color of Certain O-Ring Seals Is Changing {7555}
2002/12/01

The 1U-8846 Gasket Sealant Is Cancelled {7555}
2010/03/31

Engine News

The Color of Certain O-Ring Seals Is Changing {7555}
2003/01/01

The 1U-8846 Gasket Sealant Is Cancelled {7555}
2010/03/22

Special Instruction

Installing Crankshaft Seals And Wear Sleeves Using The Former 9S8868, 9S8873, 9S8881 And 9S8888 Tools Groups{1160, 1161, 0704}
Installing Crankshaft Seals And Wear Sleeves Using The Former 9S8868, 9S8873, 9S8881 And 9S8888 Tools Groups{1160, 1161, 0704}

Installation Of Crankshaft Seals And Wear Sleeves{1160, 1161}
Installation Of Crankshaft Seals And Wear Sleeves{1160, 1161}

Installation Of Crankshaft Seals And Wear Sleeves{1203}
Installation Of Crankshaft Seals And Wear Sleeves{1203}

Crankshaft Seal And Wear Sleeve Installation{1160, 1161}
Crankshaft Seal And Wear Sleeve Installation{1160, 1161}

Installation Of Seal Groups With Hydrodynamic Grooves In The Seal Lip{1160, 1161}
Installation Of Seal Groups With Hydrodynamic Grooves In The Seal Lip{1160, 1161}

Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}

Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}

Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}

O-Rings - Radial, Fitting Assembly O-Rings and Other O-Ring Applications {0599, 0738, 4000, 4250, 4300, 5050, 5057, 7555}
O-Rings - Radial, Fitting Assembly O-Rings and Other O-Ring Applications {0599, 0738, 4000, 4250, 4300, 5050, 5057, 7555}

Lip Type Seals {0599, 0733, 5050, 7555}
Lip Type Seals {0599, 0733, 5050, 7555}

Service Letter-NACD

Cylinder Head Gasket And Spacer Deck Gasket Replacement In Various Gasket Kits
Cylinder Head Gasket And Spacer Deck Gasket Replacement In Various Gasket Kits

Service Letter-Australia

Service Letter-CFEL

Service Letter-CSARL

Service Letter-Americas

Service Letter-Brazil

Service Letter-Truck/Ag/Marine

Technical Information Bulletin

Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}

Tool Operating Manual

Caterpillar O-rings: Measuring Tool, Material Application, and Dash Size Cross Reference{0374, 0599, 0759, 0767, 7555}
Caterpillar O-rings: Measuring Tool, Material Application, and Dash Size Cross Reference{0374, 0599, 0759, 0767, 7555}

Service Letter-China

Cylinder Head Gasket And Spacer Deck Gasket Replacement In Various Gasket Kits
Cylinder Head Gasket And Spacer Deck Gasket Replacement In Various Gasket Kits

Service Letter-Asia

Undercarriage Reconditioning Bulletin

Track Seal Installers and Track Bushing Groove Gauges for Rigid Track Seals {0729, 4150, 7450, 7555}
Track Seal Installers and Track Bushing Groove Gauges for Rigid Track Seals {0729, 4150, 7450, 7555}

Reuse And Salvage Guidelines

Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}

Service Letter-APD

Cylinder Head Gasket And Spacer Deck Gasket Replacement In Various Gasket Kits
Cylinder Head Gasket And Spacer Deck Gasket Replacement In Various Gasket Kits

Disassembly and Assembly

Crankshaft Front Seal And Wear Sleeve
3306 VEHICULAR ENGINE FOR D7G TRACTOR

Crankshaft Rear Seal And Wear Sleeve
3306 VEHICULAR ENGINE FOR D7G TRACTOR

Service Magazine

6V6142 And 6V6143 Installers Can Be Used To Install Crankshaft Seals And Wear Sleeves{0622,0626,1160,1161}
1982/11/01

Tools To Remove Wear Sleeves From Crankshafts{0621,7558}
1977/04/18

New Seal For Crankshaft{1161}
1977/07/04

Tools To Install Crankshaft Seal And Wear Sleeve{1160,1161,0622}
1977/07/11

Double Lip Seal With Hydrodynamic Grooves Used At Rear Of Crankshaft {1161,1200}
1987/09/28

Cast Ring Duo-Cone Seal Groups Available For Parts Service{7561}
1988/05/23

Four Crankshaft Rear Seals Are Available For Use On 3304 And 3306 Engines{1161}
1979/03/26

Check Crankshaft Seals During Installation Of Engine Overhaul Gasket Kits; Add A Wear Sleeve When Needed{7555,7558,1161}
1979/06/04

New Front Crankshaft Seal Used{1160,1202}
1991/02/18

Improved Caterpillar O-ring Face Seals are Now Available {7555}
2000/05/08

Improvements to Caterpillar's Gasket Kits for Engines {7555}
2001/01/15

The Color of Certain O-Ring Seals Will Change {7555}
2002/12/09

Final Drive Duo-Cone Seal Assembly Information Update {7561}
2009/01/26

The 1U-8846 Gasket Sealant Is Canceled {7555}
2010/03/22

Truck Engine News

The 1U-8846 Gasket Sealant Is Cancelled {7555}
2010/03/31

Engine News

The 1U-8846 Gasket Sealant Is Cancelled {7555}
2010/03/22

Special Instruction

Installation Of 6V124 Drive Coupling Modification Kit{0650, 0706, 1250}
Installation Of 6V124 Drive Coupling Modification Kit{0650, 0706, 1250}

Chart for Heli-Coil Repair {0676}
Chart for Heli-Coil Repair {0676}

O-Rings - Radial, Fitting Assembly O-Rings and Other O-Ring Applications {0599, 0738, 4000, 4250, 4300, 5050, 5057, 7555}
O-Rings - Radial, Fitting Assembly O-Rings and Other O-Ring Applications {0599, 0738, 4000, 4250, 4300, 5050, 5057, 7555}

Service Magazine

New Aftercooler Hose Clamp Helps Prevent Leaks{1063}
1984/02/27

2P8316 Dowel Now Available For Parts Service{0652}
1979/04/30

Sealant Now Used On Pipe Plugs At The Bottom Of The Oil Filter Base Assembly To Prevent Oil Leakage{1306}
1979/08/13

New Shaft Bracket And Oil Supply Plug Used In Rocker Valve Shaft Assembly{1102,7553}
1991/03/25

The 1U-8846 Gasket Sealant Is Canceled {7555}
2010/03/22

Truck Engine News

Service Magazines, Engine News, and Truck Engine News Articles Moved from Dealer.cat.com to SISweb {0374, 1000, 7000}
Service Magazines, Engine News, and Truck Engine News Articles Moved from Dealer.cat.com to SISweb {0374, 1000, 7000}

A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}

Changes to the Way Serial Numbers are Displayed in Truck Engine News {0374, 1000, 7000}
Changes to the Way Serial Numbers are Displayed in Truck Engine News {0374, 1000, 7000}

Engine News

Service Magazines, Engine News, and Truck Engine News Articles Moved from Dealer.cat.com to SISweb {0374, 1000, 7000}
2015/09/28

New CAT Inspect Form Available for EMCP Troubleshooting and Inspection {0374, 4490, 7451, 7620}
New CAT Inspect Form Available for EMCP Troubleshooting and Inspection {0374, 4490, 7451, 7620}

A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}

Changes to the Way Serial Numbers are Displayed in Engine News {0374, 1000, 7000}
Changes to the Way Serial Numbers are Displayed in Engine News {0374, 1000, 7000}

Special Instruction

Index of Repair Process Engineering Publications {0374, 1000, 7000}
Index of Repair Process Engineering Publications {0374, 1000, 7000}

Procedure for Ordering Vintage Parts {0374, 1000, 7000}
Procedure for Ordering Vintage Parts {0374, 1000, 7000}

Caterpillar Service Welding Guide {0374, 0599, 0677, 0678, 0679}
Caterpillar Service Welding Guide {0374, 0599, 0677, 0678, 0679}

Maintenance Guide For Cab Pressurization on All Caterpillar Products{0374, 0644, 0768, 7301, 7311, 7500}
Maintenance Guide For Cab Pressurization on All Caterpillar Products{0374, 0644, 0768, 7301, 7311, 7500}

Caterpillar Communication Regarding REACH Article 33{0374, 7000}
Caterpillar Communication Regarding REACH Article 33{0374, 7000}

Introduction to Visualization Service Procedure (VSP) {0374, 1000, 7000}
Introduction to Visualization Service Procedure (VSP) {0374, 1000, 7000}

Visual Service Procedures - Colors and Symbols {0374, 7000, 7006, 7960}
Visual Service Procedures - Colors and Symbols {0374, 7000, 7006, 7960}

Hose Inspection Form {0374, 0599, 5057, 5057}
Hose Inspection Form {0374, 0599, 5057, 5057}

Service Letter-NACD

PRODUCT SUPPORT PROGRAM FOR INSTALLING PRODUCT LINK PL542 OR PL240B CELLULAR RADIO SYSTEMS OR UPDATING SOFTWARE ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR INSTALLING PRODUCT LINK PL542 OR PL240B CELLULAR RADIO SYSTEMS OR UPDATING SOFTWARE ON CERTAIN CATERPILLAR PRODUCTS

Service Letter-Australia

Service Letter-CFEL

Service Letter-CSARL

Service Letter-Americas

Tool Operating Manual

9U-7840 Fuel Injection Equipment Calibration Fluid Test Kit{0374, 0599, 0706}
9U-7840 Fuel Injection Equipment Calibration Fluid Test Kit{0374, 0599, 0706}

146-4080 Digital Multimeter Specification, Testing, and Maintenance Manual{0374, 0599, 0709}
146-4080 Digital Multimeter Specification, Testing, and Maintenance Manual{0374, 0599, 0709}

Crimping Caterpillar 1E294, 1E716, 1E844 Hose and Couplings {0374, 0599, 0684, 0738, 5057}
Crimping Caterpillar 1E294, 1E716, 1E844 Hose and Couplings {0374, 0599, 0684, 0738, 5057}

Using the 209-3153 Portable Hose Machine {0374, 0599, 0684, 0738, 5057}
Using the 209-3153 Portable Hose Machine {0374, 0599, 0684, 0738, 5057}

Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}

Using the Cat 179-0710 Burn Rate Fuel Flow Measurement System {0374, 0599, 0706, 1250, 1280}
Using the Cat 179-0710 Burn Rate Fuel Flow Measurement System {0374, 0599, 0706, 1250, 1280}

Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}

Idler/Roller Assembly Machine{0374, 0599, 0729, 4159, 4180}
Idler/Roller Assembly Machine{0374, 0599, 0729, 4159, 4180}

Base-Mounted Recirculating Parts Washers{0374, 0599, 0680, 0699, 0700}
Base-Mounted Recirculating Parts Washers{0374, 0599, 0680, 0699, 0700}

295-0048 Bulk Fuel Filtration Group 300 GPM Flow Rate{0374, 0599, 0680, 0706, 1250, 1261, 1280}
295-0048 Bulk Fuel Filtration Group 300 GPM Flow Rate{0374, 0599, 0680, 0706, 1250, 1261, 1280}

319-2187 Diesel Particulate Filter (DPF) Cleaner {0374, 0599, 0680, 0701, 0702, 108D}
319-2187 Diesel Particulate Filter (DPF) Cleaner {0374, 0599, 0680, 0701, 0702, 108D}

Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}

149-7173 Bearing Handling Bracket Assembly {0374, 0599, 0629, 0632, 4006, 4008, 7551}
149-7173 Bearing Handling Bracket Assembly {0374, 0599, 0629, 0632, 4006, 4008, 7551}

439-3938, 439-3939, 439-3940, 439-3941, 439-3942, 439-3943 Link Bracket Assemblies {0374, 0599, 0632, 0700, 7000}
439-3938, 439-3939, 439-3940, 439-3941, 439-3942, 439-3943 Link Bracket Assemblies {0374, 0599, 0632, 0700, 7000}

Caterpillar O-rings: Measuring Tool, Material Application, and Dash Size Cross Reference{0374, 0599, 0759, 0767, 7555}
Caterpillar O-rings: Measuring Tool, Material Application, and Dash Size Cross Reference{0374, 0599, 0759, 0767, 7555}

Testing and Adjusting Fuel Injection Pump and Governor on 3064 and 3066 Engines{0374, 0599, 0706}
Testing and Adjusting Fuel Injection Pump and Governor on 3064 and 3066 Engines{0374, 0599, 0706}

Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}

Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}

Procedures For Using: 127-8781 Transfer Filter Cart , old 9U-7361 (110V, 60 hz), 169-7159 Transfer Filter Cart , old 127-8782 (220V, 50 hz) CE, 174-9158 Transfer Filter Cart , old 129-0849 (Air Motor Driven){0374, 0599, 0680, 0738}
Procedures For Using: 127-8781 Transfer Filter Cart , old 9U-7361 (110V, 60 hz), 169-7159 Transfer Filter Cart , old 127-8782 (220V, 50 hz) CE, 174-9158 Transfer Filter Cart , old 129-0849 (Air Motor Driven){0374, 0599, 0680, 0738}

Procedure for Using 173-8839 Fluid Storage Filter Cart {0113, 0374, 0599, 0680, 0738, 7579}
Procedure for Using 173-8839 Fluid Storage Filter Cart {0113, 0374, 0599, 0680, 0738, 7579}

Converting 137-7238 Hose Assembly Machines and 134-5640 Hose Assembly Machines (100 Ton) from Sony Control to Crimputer Control{0374, 0599, 0684, 5057}
Converting 137-7238 Hose Assembly Machines and 134-5640 Hose Assembly Machines (100 Ton) from Sony Control to Crimputer Control{0374, 0599, 0684, 5057}

127-8458 Final Drive Disassembly and Assembly Bench {0374, 0599, 0722, 0727}
127-8458 Final Drive Disassembly and Assembly Bench {0374, 0599, 0722, 0727}

Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}

TT5000 to TT7000 Torque Turn Wrench Conversion{0374, 0599, 0602, 0677, 79NY}
TT5000 to TT7000 Torque Turn Wrench Conversion{0374, 0599, 0602, 0677, 79NY}

Set up and Basic Operation of the 145-5161 Floor Model Hose Machine {0374, 0599, 0684, 0738, 5057}
Set up and Basic Operation of the 145-5161 Floor Model Hose Machine {0374, 0599, 0684, 0738, 5057}

Using the 149-0173 Choker-Style Fabric Basket to Install and Remove Bucket Teeth{0374, 0599, 0751, 6700, 6800}
Using the 149-0173 Choker-Style Fabric Basket to Install and Remove Bucket Teeth{0374, 0599, 0751, 6700, 6800}

Using 149-0174 Non-Choker Style Fabric Baskets to Install or Remove Bucket or Blade Cutting Edges{0374, 0599, 0632, 0700, 0751, 6800}
Using 149-0174 Non-Choker Style Fabric Baskets to Install or Remove Bucket or Blade Cutting Edges{0374, 0599, 0632, 0700, 0751, 6800}

Operating Instructions for 155-1536 Valve Recession Tool Kit for all G3500 and 3500 Engines{0374, 0599, 0701, 0703, 0759, 0767}
Operating Instructions for 155-1536 Valve Recession Tool Kit for all G3500 and 3500 Engines{0374, 0599, 0701, 0703, 0759, 0767}

Operating Instructions for 148-2997 Valve Recession Tool Group Used On 3600, G3600, and C175 Engines{0374, 0599, 0701, 0703, 0759}
Operating Instructions for 148-2997 Valve Recession Tool Group Used On 3600, G3600, and C175 Engines{0374, 0599, 0701, 0703, 0759}

Using the 164-2691 Printer Group {0374, 0599, 0684, 5057}
Using the 164-2691 Printer Group {0374, 0599, 0684, 5057}

168-7720 Ultrasonic Wear Indicator III Group{0374, 0599, 0729, 0787}
168-7720 Ultrasonic Wear Indicator III Group{0374, 0599, 0729, 0787}

169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}
169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}

Undercarriage Spring Disassembly and Assembly Bench{0374, 0599, 0700, 0729}
Undercarriage Spring Disassembly and Assembly Bench{0374, 0599, 0700, 0729}

4-Inch Radial Hose Machine{0374, 0599, 0684, 0738, 5057}
4-Inch Radial Hose Machine{0374, 0599, 0684, 0738, 5057}

226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561}
226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561}

131-5051 Dataview Group and Dataview Portable Tech Station Group{0374, 0599, 0701, 0709}
131-5051 Dataview Group and Dataview Portable Tech Station Group{0374, 0599, 0701, 0709}

Using the 4C-8195 Control Service Tool{0374, 0599, 0709, 7490}
Using the 4C-8195 Control Service Tool{0374, 0599, 0709, 7490}

188-3242 Filter Cart Group and 227-2479 Filter Cart Group{0374, 0599, 0680, 0738, 0768, 5050, 5056, 5095}
188-3242 Filter Cart Group and 227-2479 Filter Cart Group{0374, 0599, 0680, 0738, 0768, 5050, 5056, 5095}

Procedures for Using the 212-1503 Portable Parts Washer{0374, 0599, 0680, 0699, 0700}
Procedures for Using the 212-1503 Portable Parts Washer{0374, 0599, 0680, 0699, 0700}

Using the 9U-5792, 4C-5052, 4C-5054, 4C-3670, and 4C-3680 Hydraulic Hose Machines{0374, 0599, 0684, 0738, 5057}
Using the 9U-5792, 4C-5052, 4C-5054, 4C-3670, and 4C-3680 Hydraulic Hose Machines{0374, 0599, 0684, 0738, 5057}

188-3922 Broken Exhaust Bolt and Stud Removal Group for 3114, 3116, 3126, 3126B, 3176, 3176B, C-10, and C12 Engines{0374, 0599, 0701, 0702, 0703}
188-3922 Broken Exhaust Bolt and Stud Removal Group for 3114, 3116, 3126, 3126B, 3176, 3176B, C-10, and C12 Engines{0374, 0599, 0701, 0702, 0703}

Using the 223-2105 Hose Cutting Machine{0374, 0599, 0678, 0684, 0708, 0738, 5057, 6060}
Using the 223-2105 Hose Cutting Machine{0374, 0599, 0678, 0684, 0708, 0738, 5057, 6060}

Crimping XT-3 ES and XT-5 S4G, MCSH, and MCSX Couplings Using 4C-3660, 4C-5052, 4C-5053, 9U-5792, or 9U-7261 Hose Machines{0374, 0599, 0684, 0738, 5057}
Crimping XT-3 ES and XT-5 S4G, MCSH, and MCSX Couplings Using 4C-3660, 4C-5052, 4C-5053, 9U-5792, or 9U-7261 Hose Machines{0374, 0599, 0684, 0738, 5057}

243-0765 Bench Model Hose Machine For Use With the 242-3567 Variable Crimp Die Bowl{0374, 0599, 0684, 0738, 5057}
243-0765 Bench Model Hose Machine For Use With the 242-3567 Variable Crimp Die Bowl{0374, 0599, 0684, 0738, 5057}

193-4124 Rear Wheel Bearing Preload Adjuster for 793 Off-Highway Trucks{0374, 0599, 0700, 0722, 0727, 0731}
193-4124 Rear Wheel Bearing Preload Adjuster for 793 Off-Highway Trucks{0374, 0599, 0700, 0722, 0727, 0731}

Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}

CRB Valve Spring Testers 8S-2263 and 4C-9496{0374, 0599, 0700, 0701, 1108}
CRB Valve Spring Testers 8S-2263 and 4C-9496{0374, 0599, 0700, 0701, 1108}

396-6461 Tube Assembly{0374, 0599, 0632, 3030, 3258}
396-6461 Tube Assembly{0374, 0599, 0632, 3030, 3258}

Crimping Permanent Couplings Using the 136-3642 Crimp Tool Group in Combination and XT Hose Machines{0374, 0599, 0684, 5057}
Crimping Permanent Couplings Using the 136-3642 Crimp Tool Group in Combination and XT Hose Machines{0374, 0599, 0684, 5057}

Crimping 1028 Thermoplastic Hose, 2760 Reduced Diameter Thermoplastic Hose, and 1543 Air Conditioning Hose{0374, 0599, 0684, 1808, 1812, 7554}
Crimping 1028 Thermoplastic Hose, 2760 Reduced Diameter Thermoplastic Hose, and 1543 Air Conditioning Hose{0374, 0599, 0684, 1808, 1812, 7554}

456-4449 Support Device{0374, 0599, 0629, 0632, 0700}
456-4449 Support Device{0374, 0599, 0629, 0632, 0700}

Installing 457-6030 (C3-290 Controller) on Hose Crimping Machines 233-8048, 286-4354, 286-4355, 275-6199, 286-4353, and 233-8038{0374, 0599, 0684, 0700, 0738, 5057}
Installing 457-6030 (C3-290 Controller) on Hose Crimping Machines 233-8048, 286-4354, 286-4355, 275-6199, 286-4353, and 233-8038{0374, 0599, 0684, 0700, 0738, 5057}

20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}

150T Track Repair Group Field Follow Tools, Operation, and Parts {0374, 0700, 0729, 4169, 4170, 4171}
150T Track Repair Group Field Follow Tools, Operation, and Parts {0374, 0700, 0729, 4169, 4170, 4171}

NEHS1214: 455-0126 Nitrogen Booster Pump Group {0374, 0599, 0647, 0756, 4263, 4331, 5077, 7200}
NEHS1214: 455-0126 Nitrogen Booster Pump Group {0374, 0599, 0647, 0756, 4263, 4331, 5077, 7200}

464-0265 Lifting Bracket Assembly{0374, 0599, 0629, 0632, 0700, 0708, 1353}
464-0265 Lifting Bracket Assembly{0374, 0599, 0629, 0632, 0700, 0708, 1353}

General Usage for all Shackle Types{0374, 0599, 0629, 0632, 1122, 6459, 7000}
General Usage for all Shackle Types{0374, 0599, 0629, 0632, 1122, 6459, 7000}

442-1750 Lifting Plate{0374, 0599, 0629, 0632, 0700, 1122}
442-1750 Lifting Plate{0374, 0599, 0629, 0632, 0700, 1122}

Zip-Tie Installation Guide{0374, 0599, 7000}
Zip-Tie Installation Guide{0374, 0599, 7000}

NEHS1249 100T Track Repair Group {0374, 0599, 0700, 0729, 4169, 4170}
NEHS1249 100T Track Repair Group {0374, 0599, 0700, 0729, 4169, 4170}

NEHS1211: 463-3380 Jack Group Belly Guard Lift {0374, 0599, 0629, 0632, 0700, 7150, 7151, 7153}
NEHS1211: 463-3380 Jack Group Belly Guard Lift {0374, 0599, 0629, 0632, 0700, 7150, 7151, 7153}

NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}

{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}

NEHS1270 TesLite and LoadProCables {0374, 0599, 0709, 0734}
NEHS1270 TesLite and LoadProCables {0374, 0599, 0709, 0734}

M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}

Base Mounted Recirculating Parts Washers {0374, 0599, 0680, 0699, 0700}
Base Mounted Recirculating Parts Washers {0374, 0599, 0680, 0699, 0700}

M0090131 Battery Analyzer 480-4181 (484-4859 Group) {0374, 0599, 0709, 1401, 7468}
M0090131 Battery Analyzer 480-4181 (484-4859 Group) {0374, 0599, 0709, 1401, 7468}

Portable Aqueous Based Parts Cleaners, Models 482-9830, 482-9831, and 482-9832 {0374, 0599, 0680, 0699}
Portable Aqueous Based Parts Cleaners, Models 482-9830, 482-9831, and 482-9832 {0374, 0599, 0680, 0699}

Service Letter-China

PRODUCT SUPPORT PROGRAM FOR INSTALLING PRODUCT LINK PL542 OR PL240B CELLULAR RADIO SYSTEMS OR UPDATING SOFTWARE ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR INSTALLING PRODUCT LINK PL542 OR PL240B CELLULAR RADIO SYSTEMS OR UPDATING SOFTWARE ON CERTAIN CATERPILLAR PRODUCTS

Service Letter-Asia

Undercarriage Reconditioning Bulletin

Track Data Charts {0372, 0374, 4170}
Track Data Charts {0372, 0374, 4170}

Undercarriage Reconditioning Bulletin Contents {0374, 4150}
Undercarriage Reconditioning Bulletin Contents {0374, 4150}

Track Servicing Equipment, Tooling, Literature, and Training Review {0374, 4169, 4170, 4171, 4172, 4174, 4175, 4176}
Track Servicing Equipment, Tooling, Literature, and Training Review {0374, 4169, 4170, 4171, 4172, 4174, 4175, 4176}

Roller Servicing Equipment, Tooling, Literature, and Training Review {0374, 4154, 4180, 4181, 7561}
Roller Servicing Equipment, Tooling, Literature, and Training Review {0374, 4154, 4180, 4181, 7561}

Idler Servicing Equipment, Tooling, Literature, and Training Review {0374, 0599, 4159, 4167, 7561}
Idler Servicing Equipment, Tooling, Literature, and Training Review {0374, 0599, 4159, 4167, 7561}

Foreword {0374, 4150, 7000, 7590, 7950}
Foreword {0374, 4150, 7000, 7590, 7950}

Introduction {0374, 4150, 7000, 7590, 7950}
Introduction {0374, 4150, 7000, 7590, 7950}

Training Materials {0314, 0374, 4150}
Training Materials {0314, 0374, 4150}

Suggested Equipment Layouts {0374, 0729, 4150, 7000, 7950}
Suggested Equipment Layouts {0374, 0729, 4150, 7000, 7950}

Reuse And Salvage Guidelines

Index of Repair Process Engineering Publications {0374, 1000, 7000}
Index of Repair Process Engineering Publications {0374, 1000, 7000}

Reuse and Testing of Fuel Injection Pump Housing {0374, 1000, 1250, 1300}
Reuse and Testing of Fuel Injection Pump Housing {0374, 1000, 1250, 1300}

General Salvage and Reconditioning Techniques {0374, 1000}
General Salvage and Reconditioning Techniques {0374, 1000}

Transmission Reuse and Salvage Manual Contents {0374, 3030}
Transmission Reuse and Salvage Manual Contents {0374, 3030}

Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}

Caterpillar Service Welding Guide {0374, 0599, 0677, 0678, 0679}
Caterpillar Service Welding Guide {0374, 0599, 0677, 0678, 0679}

Thermal Spray Procedures for Pump Gear Drive Inside Diameter{0374, 0599, 0679, 3101}
Thermal Spray Procedures for Pump Gear Drive Inside Diameter{0374, 0599, 0679, 3101}

Thermal Spray Procedures for Torque Converter Carrier - Seal Ring Bore {0374, 0599, 0679, 3101, 3135}
Thermal Spray Procedures for Torque Converter Carrier - Seal Ring Bore {0374, 0599, 0679, 3101, 3135}

Thermal Spray Procedures for TTT Sprocket Hub Bearing Bores {0374, 0599, 0679, 4050}
Thermal Spray Procedures for TTT Sprocket Hub Bearing Bores {0374, 0599, 0679, 4050}

Thermal Spray Procedure for D7H - D11R TTT Pivot Shafts {0374, 0599, 0679, 4151}
Thermal Spray Procedure for D7H - D11R TTT Pivot Shafts {0374, 0599, 0679, 4151}

Application of Abrasion Resistant Material{0374, 0679, 0751, 0759, 6800}
Application of Abrasion Resistant Material{0374, 0679, 0751, 0759, 6800}

Reuse and Salvage Guidelines Subscriptions {0374, 0599, 1000, 7000}
Reuse and Salvage Guidelines Subscriptions {0374, 0599, 1000, 7000}

Scrap Barrel Analysis {0374, 0599, 0700, 0701, 0738, 1000, 7000}
Scrap Barrel Analysis {0374, 0599, 0700, 0701, 0738, 1000, 7000}

Fundamentals of Plasma Transferred Wire Arc (PTWA) Spray for Reconditioning Components {0374, 0599, 0679, 1000}
Fundamentals of Plasma Transferred Wire Arc (PTWA) Spray for Reconditioning Components {0374, 0599, 0679, 1000}

Submerged Arc Welding Procedure for D7-D11 TTT Pivot Shafts {0374, 0599, 0677, 0678, 0679, 4153}
Submerged Arc Welding Procedure for D7-D11 TTT Pivot Shafts {0374, 0599, 0677, 0678, 0679, 4153}

Contamination Control Guidelines

Hose Products Reference Guide {0374, 0599, 0684, 0738, 5057}
Hose Products Reference Guide {0374, 0599, 0684, 0738, 5057}

Applied Failure Analysis

Failure Analysis Report - AFA Good Report {0374, 1000}
Failure Analysis Report - AFA Good Report {0374, 1000}

Reference Guide for a Proper Failure Analysis by CAT Dealer {0374, 1000}
Reference Guide for a Proper Failure Analysis by CAT Dealer {0374, 1000}

Product Evaluation Report - AFA Bad Report {0374, 1000}
Product Evaluation Report - AFA Bad Report {0374, 1000}

Service Letter-APD

PRODUCT SUPPORT PROGRAM FOR INSTALLING PRODUCT LINK PL542 OR PL240B CELLULAR RADIO SYSTEMS OR UPDATING SOFTWARE ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR INSTALLING PRODUCT LINK PL542 OR PL240B CELLULAR RADIO SYSTEMS OR UPDATING SOFTWARE ON CERTAIN CATERPILLAR PRODUCTS

Technical Analysis

Technical Analysis (TA1) Visual Inspection for Track-Type Tractors (Oval Track) {0372, 1000, 7000, 753S, 7565}
Technical Analysis (TA1) Visual Inspection for Track-Type Tractors (Oval Track) {0372, 1000, 7000, 753S, 7565}

Technical Analysis (TA1) Visual Inspection for Track-Type Tractors {0372, 1000, 7000, 753S, 7565}
Technical Analysis (TA1) Visual Inspection for Track-Type Tractors {0372, 1000, 7000, 753S, 7565}

Technical Analysis (TA1) Visual Inspection for Track-Type Tractors (Hydrostatic) {0372, 1000, 7000, 753S, 7565}
Technical Analysis (TA1) Visual Inspection for Track-Type Tractors (Hydrostatic) {0372, 1000, 7000, 753S, 7565}

Service Magazine

Interactive Self-Paced Computer Training Course Available forTechnical Marketing Information (TMI) System Users {0314}
2000/01/31

The Current Special Publication, PECP9067, "One Safe Source" Is Now Available Through The Internet {0374}
2002/05/13

Announcing the Combination of Groups Within the Paper Copies of the Caterpillar Parts Manuals {0374}
2002/06/03

The Contents Of The Service Manuals For All Caterpillar Machines Is Available On The Caterpillar Intranet {1000}
2002/12/02

"Tool and Shop Products Guide" by the Cat Service Technology Group (CSTG) Has Been Replaced by Two New Catalogs {0374}
2006/04/17

TA2 (Technical Analysis) Inspections are Now Available on SIS {0372, 1000, 7000, 753T, 7565}
2013/01/10

Recent Changes to the R134a Refrigerant Air Conditioning Manuals Are Now Available for All Caterpillar Products {0374, 1802, 1805, 1807, 1808, 1809, 7309, 7320, 7322, 7343}
2014/08/19

A New Tool Operating Manual for Proper Zip-Tie Installation Is Now Available for All Caterpillar Products {0374, 0599, 7000}
2015/08/10

Service Magazines, Engine News, and Truck Engine News Articles Moved from Dealer.cat.com to SISweb {0374, 1000, 7000}
Service Magazines, Engine News, and Truck Engine News Articles Moved from Dealer.cat.com to SISweb {0374, 1000, 7000}

A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}

Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}
Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}

Military Electronic Technician (Military ET) Is Now Available For Military Personnel {0374, 0376, 0599, 1000, 7000, 7610, 7620}
Military Electronic Technician (Military ET) Is Now Available For Military Personnel {0374, 0376, 0599, 1000, 7000, 7610, 7620}

Process to Print Collage Schematics {0374, 1000, 7000}
Process to Print Collage Schematics {0374, 1000, 7000}

Changes to the Way Serial Numbers are Displayed on Service Magazines {0374, 1000, 7000}
Changes to the Way Serial Numbers are Displayed on Service Magazines {0374, 1000, 7000}

New Service Information Content Is Now Available in Channel 1 {0374, 7000}
New Service Information Content Is Now Available in Channel 1 {0374, 7000}

Engine News

A New Coolant Conditioner Is Now Available {1350, 1352, 1395}
2012/03/28

Special Instruction

Use And Maintenance Of 8T0910 Fuel Sulfur Analyzer Group{0786, 1280}
Use And Maintenance Of 8T0910 Fuel Sulfur Analyzer Group{0786, 1280}

Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}

Managing Engine Oil Service Intervals for Equipment Operating at High Altitudes{1261, 1308, 1348}
Managing Engine Oil Service Intervals for Equipment Operating at High Altitudes{1261, 1308, 1348}

Instructions for Use of Cat Coolant Conditioner for Aluminum Components {1350, 1352, 1395}
Instructions for Use of Cat Coolant Conditioner for Aluminum Components {1350, 1352, 1395}

Instructions for Use of Cat® Coolant Conditioner for Modular Core Aluminum Radiators {1350, 1350, 1352, 1353, 1395}
Instructions for Use of Cat^® Coolant Conditioner for Modular Core Aluminum Radiators {1350, 1350, 1352, 1353, 1395}

Tool Operating Manual

NEHS1126: 370-8570 Bulk Fuel Filtration Group 200 GPM Flow Rate {0599, 0680, 0706, 0782, 1250, 1280}
NEHS1126: 370-8570 Bulk Fuel Filtration Group 200 GPM Flow Rate {0599, 0680, 0706, 0782, 1250, 1280}

Using the Cat 179-0710 Burn Rate Fuel Flow Measurement System {0374, 0599, 0706, 1250, 1280}
Using the Cat 179-0710 Burn Rate Fuel Flow Measurement System {0374, 0599, 0706, 1250, 1280}

370-8568 Bulk Fuel Filtration Group 50 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
370-8568 Bulk Fuel Filtration Group 50 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}

204-7392 (Air Motor Driven) Filter Cart {0645, 0680, 0738, 5056, 5068}
204-7392 (Air Motor Driven) Filter Cart {0645, 0680, 0738, 5056, 5068}

284-0413 Bulk Fuel Filtration Group 50 GPM Flow Rate{0680, 0782, 1250, 1280}
284-0413 Bulk Fuel Filtration Group 50 GPM Flow Rate{0680, 0782, 1250, 1280}

284-0415 Bulk Fuel Filtration Group 100 GPM Flow Rate{0680, 0782, 1250, 1280}
284-0415 Bulk Fuel Filtration Group 100 GPM Flow Rate{0680, 0782, 1250, 1280}

284-0416 Bulk Fuel Filtration Group 200 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
284-0416 Bulk Fuel Filtration Group 200 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}

295-0048 Bulk Fuel Filtration Group 300 GPM Flow Rate{0374, 0599, 0680, 0706, 1250, 1261, 1280}
295-0048 Bulk Fuel Filtration Group 300 GPM Flow Rate{0374, 0599, 0680, 0706, 1250, 1261, 1280}

370-8569 Bulk Fuel Filtration Group 100 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
370-8569 Bulk Fuel Filtration Group 100 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}

370-8571 Bulk Fuel Filtration Group 300 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
370-8571 Bulk Fuel Filtration Group 300 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}

Procedures for Using 9U-5971 and 173-9842 Filter Cart Group {0599, 0738, 5050, 5056, 5057, 5068, 5095, 7579}
Procedures for Using 9U-5971 and 173-9842 Filter Cart Group {0599, 0738, 5050, 5056, 5057, 5068, 5095, 7579}

Procedures For Using: 127-8781 Transfer Filter Cart , old 9U-7361 (110V, 60 hz), 169-7159 Transfer Filter Cart , old 127-8782 (220V, 50 hz) CE, 174-9158 Transfer Filter Cart , old 129-0849 (Air Motor Driven){0374, 0599, 0680, 0738}
Procedures For Using: 127-8781 Transfer Filter Cart , old 9U-7361 (110V, 60 hz), 169-7159 Transfer Filter Cart , old 127-8782 (220V, 50 hz) CE, 174-9158 Transfer Filter Cart , old 129-0849 (Air Motor Driven){0374, 0599, 0680, 0738}

Procedure for Using 173-8839 Fluid Storage Filter Cart {0113, 0374, 0599, 0680, 0738, 7579}
Procedure for Using 173-8839 Fluid Storage Filter Cart {0113, 0374, 0599, 0680, 0738, 7579}

Reuse And Salvage Guidelines

Filtration Times for Caterpillar Machine Fluid Compartments{0680, 0738, 0768, 3080, 5050, 5056, 5095}
Filtration Times for Caterpillar Machine Fluid Compartments{0680, 0738, 0768, 3080, 5050, 5056, 5095}

Contamination Control Guidelines

Solvent Pretreatment Method for Determining Additive Interference in New Bulk Oils {1348, 3080, 4070, 429F, 5095, 7542}
Solvent Pretreatment Method for Determining Additive Interference in New Bulk Oils {1348, 3080, 4070, 429F, 5095, 7542}

Caterpillar Bulk Oil Filtration Procedure {1348, 3080, 4070, 429F, 5095, 7542}
Caterpillar Bulk Oil Filtration Procedure {1348, 3080, 4070, 429F, 5095, 7542}

Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}

Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}

Filtration Times for Caterpillar Machine Fluid Compartments{0680, 0738, 0768, 3080, 5050, 5056, 5095}
Filtration Times for Caterpillar Machine Fluid Compartments{0680, 0738, 0768, 3080, 5050, 5056, 5095}

Disassembly and Assembly

Hydraulic Filter
173, 183, 193 HYDRAULIC CONTROLS

Oil Filter And Base (Earlier)
3306 VEHICULAR ENGINE FOR D7G TRACTOR

Oil Filter And Base (Later)
3306 VEHICULAR ENGINE FOR D7G TRACTOR

Service Magazine

Green Dye (Color) Added To Transmission Oil For Easier Identification Of Leaks{3004,3067,3179}
1981/01/19

Engine Storage; Engine Start-Up After Storage{1000}
1982/02/22

Lubricant Recommendations Changed For All Caterpillar Engines To Combat Effects Of Fuel Sulfur{1318,0375,0374,1280}
1982/05/03

Caterpillar Recommends Against The Use Of Alcohol Mist Injection Systems{1050,1250}
1982/06/28

New Oil Additives Can Cause High Copper (Cu) Indications During S.O.S. Tests{0372,1318}
1982/09/27

Improved Lubrication Of Final Drive Bearing{4059,4070}
1984/10/15

Canister Size Of Coolant Conditioner Element Has Changed{1350}
1985/11/25

Fuel Sulfur Analyzer Available{0651,1280,1318}
1986/01/13

Oil Total Base Number (TBN) Test Kit Available{1300}
1986/01/20

High Silicates In Antifreeze{1350}
1986/02/03

New 8T2998 Lubricant Available{0645,1210}
1986/02/17

Engine Oil Filter Element Has Metal Wrapper Instead Of Paper Wrapper{1318}
1986/03/10

Caterpillar Antifreeze Now Used And Available From Parts Departments{1350,1395}
1986/11/10

Service Tip: Fasten The Tube For The Engine Coolant Pressure Gauge To A Stationary Hose{1350,7453}
1977/10/10

Easy Five-Minute Coolant Conditioner Test With 8T5296 Coolant Conditioner Test Kit{1395,0786}
1987/03/23

Cooling System Conditioner{1395,1350}
1987/03/23

5P957 And 5P3514 Coolant And Battery Tester{0786,1395,1401}
1987/03/23

Stop Engine If There Is A Turbocharger Bearing Failure{1052,1318}
1987/04/06

The Special Breathers For The Bevel Gear Case And The Final Drive Cases Have Been Removed-A Common Breather For These Systems Is Now Located On The Transmission Oil Filler Spout{4059,4070,3179,3067}
1978/04/24

Analyzing Caterpillar And Competitive Antifreezes For Amount Of Silicates{1350,1395}
1988/02/22

New Publication Available-"Diesel Fuels And Your Engine"{0374,0375,0645}
1988/03/21

Extraction Tools For "Live Oil Sampling"{7770,0770,0781,0783,0784}
1988/04/18

Installation Of Valves For Live Oil Sampling{7770,0770,0781,0783,0784}
1988/06/06

Use Correct Procedure To Clean The Engine Lubrication System If Permanent Type Antifreeze (Ethylene Glycol) Is In The Engine{1318,1350}
1979/02/19

Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27

Engine Oil Viscosity Changed To SAE 10W/30 For Shipment From All U.S. Factories{1318}
1979/10/15

Revision Of Recommendations For Temporary Increases In Transmission Oil Level During Operation On Severe (High Angle) Slopes{4059,3067,3179}
1979/12/10

Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17

New Engine Wall Charts Give Maintenance Management Recommendations{0374,0375,7500,7557,7580}
1989/03/06

Engine Coolant Can Be Recycled{1395}
1989/11/13

New Cooling System Cleaner Now Available For All Engines{1350,0680,1352,1353}
1989/12/25

Updated List Of Charts And Decals Available For Lubrication And Maintenance Intervals{0374,0375,7500,7557,7581}
1990/08/06

Caterpillar Introduces New Long Life Heavy Duty Engine Coolant{1395}
1994/09/19

A New Quick Coupler is Required to Extend the Service Life of Dual Purpose Valves {6129, 7542}
2002/01/21

A New Edition of the Special Publication, SEBD0640, "Oil and Your Engine" is Available {1348}
2001/11/19

Color Coded Dust Caps for S·O·S Ports Will Be Available {7770}
2003/12/01

Operation and Maintenance Manual, SEBU6250, "Caterpillar Machine Fluid Recommendations" has been Revised {1000, 1250, 1300, 1350, 7000, 7581}
2002/09/16

Understanding Elevated Copper Levels in Used Oil Samples {1348, 7542}
2003/02/17

Use New Lubricant for Rebuilding the Track {0645}
2004/09/20

Instructions for Filling the Oil of Nexus and Classic Carrier Roller and Idler {4154, 4159}
2004/08/16

Shop Chemicals are now Listed in Cat Shop Supplies and Hand Tools {0599, 0644, 0645}
2005/12/12

Use of Dry Lubricant is Recommended {0645, 7301}
2008/08/11

Managing Engine Oil Service Levels {1348}
2007/06/18

Changes to the Usage and Cleaning of the Contamination Monitor Group {0645, 0680, 1280, 1348, 3080, 429F, 5095}
2010/09/01

Undercarriage Roller And Idler Oil Has Changed From SAE 30 To SAE15W40 {7581}
2010/12/21

Redesigned Fluid Sampling Valves Are Now Available for All Cat Products {7542}
2011/02/11

Oil for Arctic Track Rollers and Idlers Has Changed from SAE 5W40 to SAE 0W40 {0645, 4159, 4180, 7000}
2011/08/10

A New Coolant Conditioner Is Now Available {1350, 1352, 1395}
2012/03/28

Recent Changes to the R134a Refrigerant Air Conditioning Manuals Are Now Available for All Caterpillar Products {0374, 1802, 1805, 1807, 1808, 1809, 7309, 7320, 7322, 7343}
2014/08/19

Truck Engine News

The Product Structure Link In The Service Information System (SIS) Has Been Changed For Service Letters That Address Parts Stock Distribution {1000, 7750}
2001/08/01

A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}

Engine News

The Product Structure Link In The Service Information System (SIS) Has Been Changed For Service Letters That Address Parts Stock Distribution {1000, 7750}
2001/09/01

A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}

Special Instruction

Use Of 6V3025 Battery Cable Repair Kit{0613, 1400}
Use Of 6V3025 Battery Cable Repair Kit{0613, 1400}

Chart for Heli-Coil Repair {0676}
Chart for Heli-Coil Repair {0676}

Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}

398-6786 Recommended J Series Flush Mount/Abrasion Adapter Welding Sequence {0679, 6800, 6801, 6802, 6803, 6805}
398-6786 Recommended J Series Flush Mount/Abrasion Adapter Welding Sequence {0679, 6800, 6801, 6802, 6803, 6805}

256-2930 Recommended K Series Flush Mount/Abrasion Adapter Welding Sequence{0679, 6800, 6801, 6802, 6803, 6805}
256-2930 Recommended K Series Flush Mount/Abrasion Adapter Welding Sequence{0679, 6800, 6801, 6802, 6803, 6805}

Caterpillar Communication Regarding REACH Article 33{0374, 7000}
Caterpillar Communication Regarding REACH Article 33{0374, 7000}

Introduction to Visualization Service Procedure (VSP) {0374, 1000, 7000}
Introduction to Visualization Service Procedure (VSP) {0374, 1000, 7000}

Visual Service Procedures - Colors and Symbols {0374, 7000, 7006, 7960}
Visual Service Procedures - Colors and Symbols {0374, 7000, 7006, 7960}

Hose Inspection Form {0374, 0599, 5057, 5057}
Hose Inspection Form {0374, 0599, 5057, 5057}

Service Letter-NACD

Certain New And Remanufactured Brake Bands Need To Be Removed From Parts Stock
Certain New And Remanufactured Brake Bands Need To Be Removed From Parts Stock

PRODUCT SUPPORT PROGRAM FOR INSTALLING PRODUCT LINK PL542 OR PL240B CELLULAR RADIO SYSTEMS OR UPDATING SOFTWARE ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR INSTALLING PRODUCT LINK PL542 OR PL240B CELLULAR RADIO SYSTEMS OR UPDATING SOFTWARE ON CERTAIN CATERPILLAR PRODUCTS

Service Letter-Australia

Certain New And Remanufactured Brake Bands Need To Be Removed From Parts Stock
Certain New And Remanufactured Brake Bands Need To Be Removed From Parts Stock

PRODUCT SUPPORT PROGRAM FOR INSTALLING PRODUCT LINK PL542 OR PL240B CELLULAR RADIO SYSTEMS OR UPDATING SOFTWARE ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR INSTALLING PRODUCT LINK PL542 OR PL240B CELLULAR RADIO SYSTEMS OR UPDATING SOFTWARE ON CERTAIN CATERPILLAR PRODUCTS

Service Letter-CFEL

Certain New And Remanufactured Brake Bands Need To Be Removed From Parts Stock
Certain New And Remanufactured Brake Bands Need To Be Removed From Parts Stock

PRODUCT SUPPORT PROGRAM FOR INSTALLING PRODUCT LINK PL542 OR PL240B CELLULAR RADIO SYSTEMS OR UPDATING SOFTWARE ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR INSTALLING PRODUCT LINK PL542 OR PL240B CELLULAR RADIO SYSTEMS OR UPDATING SOFTWARE ON CERTAIN CATERPILLAR PRODUCTS

Service Letter-CSARL

Certain New And Remanufactured Brake Bands Need To Be Removed From Parts Stock
Certain New And Remanufactured Brake Bands Need To Be Removed From Parts Stock

PRODUCT SUPPORT PROGRAM FOR INSTALLING PRODUCT LINK PL542 OR PL240B CELLULAR RADIO SYSTEMS OR UPDATING SOFTWARE ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR INSTALLING PRODUCT LINK PL542 OR PL240B CELLULAR RADIO SYSTEMS OR UPDATING SOFTWARE ON CERTAIN CATERPILLAR PRODUCTS

Service Letter-Americas

Certain New And Remanufactured Brake Bands Need To Be Removed From Parts Stock
Certain New And Remanufactured Brake Bands Need To Be Removed From Parts Stock

PRODUCT SUPPORT PROGRAM FOR INSTALLING PRODUCT LINK PL542 OR PL240B CELLULAR RADIO SYSTEMS OR UPDATING SOFTWARE ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR INSTALLING PRODUCT LINK PL542 OR PL240B CELLULAR RADIO SYSTEMS OR UPDATING SOFTWARE ON CERTAIN CATERPILLAR PRODUCTS

Service Letter-Brazil

Certain New And Remanufactured Brake Bands Need To Be Removed From Parts Stock
Certain New And Remanufactured Brake Bands Need To Be Removed From Parts Stock

Tool Operating Manual

9U7990 Counter Bore Tool Group for 3176, 3300 and 3400 Series Engines{1201}
9U7990 Counter Bore Tool Group for 3176, 3300 and 3400 Series Engines{1201}

Caterpillar O-rings: Measuring Tool, Material Application, and Dash Size Cross Reference{0374, 0599, 0759, 0767, 7555}
Caterpillar O-rings: Measuring Tool, Material Application, and Dash Size Cross Reference{0374, 0599, 0759, 0767, 7555}

Service Letter-China

Certain New And Remanufactured Brake Bands Need To Be Removed From Parts Stock
Certain New And Remanufactured Brake Bands Need To Be Removed From Parts Stock

PRODUCT SUPPORT PROGRAM FOR INSTALLING PRODUCT LINK PL542 OR PL240B CELLULAR RADIO SYSTEMS OR UPDATING SOFTWARE ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR INSTALLING PRODUCT LINK PL542 OR PL240B CELLULAR RADIO SYSTEMS OR UPDATING SOFTWARE ON CERTAIN CATERPILLAR PRODUCTS

Service Letter-Asia

Certain New And Remanufactured Brake Bands Need To Be Removed From Parts Stock
Certain New And Remanufactured Brake Bands Need To Be Removed From Parts Stock

PRODUCT SUPPORT PROGRAM FOR INSTALLING PRODUCT LINK PL542 OR PL240B CELLULAR RADIO SYSTEMS OR UPDATING SOFTWARE ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR INSTALLING PRODUCT LINK PL542 OR PL240B CELLULAR RADIO SYSTEMS OR UPDATING SOFTWARE ON CERTAIN CATERPILLAR PRODUCTS

Undercarriage Reconditioning Bulletin

Track Data Charts {0372, 0374, 4170}
Track Data Charts {0372, 0374, 4170}

Reuse And Salvage Guidelines

Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}

Application of Abrasion Resistant Material{0374, 0679, 0751, 0759, 6800}
Application of Abrasion Resistant Material{0374, 0679, 0751, 0759, 6800}

Service Letter-APD

Certain New And Remanufactured Brake Bands Need To Be Removed From Parts Stock
Certain New And Remanufactured Brake Bands Need To Be Removed From Parts Stock

PRODUCT SUPPORT PROGRAM FOR INSTALLING PRODUCT LINK PL542 OR PL240B CELLULAR RADIO SYSTEMS OR UPDATING SOFTWARE ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR INSTALLING PRODUCT LINK PL542 OR PL240B CELLULAR RADIO SYSTEMS OR UPDATING SOFTWARE ON CERTAIN CATERPILLAR PRODUCTS

Technical Analysis

Technical Analysis (TA1) Visual Inspection for Track-Type Tractors (Oval Track) {0372, 1000, 7000, 753S, 7565}
Technical Analysis (TA1) Visual Inspection for Track-Type Tractors (Oval Track) {0372, 1000, 7000, 753S, 7565}

Technical Analysis (TA1) Visual Inspection for Track-Type Tractors {0372, 1000, 7000, 753S, 7565}
Technical Analysis (TA1) Visual Inspection for Track-Type Tractors {0372, 1000, 7000, 753S, 7565}

Technical Analysis (TA1) Visual Inspection for Track-Type Tractors (Hydrostatic) {0372, 1000, 7000, 753S, 7565}
Technical Analysis (TA1) Visual Inspection for Track-Type Tractors (Hydrostatic) {0372, 1000, 7000, 753S, 7565}

Disassembly and Assembly

Backup Warning Alarm And Switch
D7G TRACTOR OPERATOR'S STATION

Service Magazine

6V2050 Tapered Rod Tool Group Available For Removal And Installation Of Bearings{1219,1218,1214}
1980/06/09

Use The 6V2056 Rod And 6V2057 Point To Find True Top Center{0653}
1980/07/14

Use Of A Flex-Hone For Cylinder Liner Reconditioning{0664,0674,1216}
1981/12/21

Engine Storage; Engine Start-Up After Storage{1000}
1982/02/22

Use New Special Instruction To Install 5P6595 Insert In Cylinder Liner Seats{1216,0621}
1982/05/03

Lubricant Recommendations Changed For All Caterpillar Engines To Combat Effects Of Fuel Sulfur{1318,0375,0374,1280}
1982/05/03

New Address For Repair Of Diagnostic Tools{0650}
1982/06/14

Instrument Panel Guards Prevent Vandalism (Damage) To Machines{7315}
1982/09/20

New Oil Additives Can Cause High Copper (Cu) Indications During S.O.S. Tests{0372,1318}
1982/09/27

New Warning Horns {7303}
1983/04/18

Remanufactured Connecting Rod Assemblies{1218}
1984/01/23

Correct Use Of The 6V4141 Sleeve Metering Calibration Tool Group{0600,0766,0778}
1984/10/01

Installing New Copper Bonded Bearings Can Extend Engine Life{1230,1203,1219}
1985/04/29

Use Caterpillar 6V50 Engine Timing Indicator For Accurate Readings{0782,0785,0775}
1985/05/27

Check 5P7435 Tee Adapter Groups In The 6V3100 Engine Timing Indicator Groups{0782}
1985/06/03

Voltage Regulator Cross Reference Chart{1410,1405}
1985/07/01

Two, New Top Dead Center Magnetic Transducers Available{0651,0653,1214,1250}
1985/10/07

Engine Information Plate Contains More Data; Use Of Performance Specifications{1250,7557}
1985/10/28

Remanufactured Crankshafts Are Available In Standard And Two Undersize Dimensions (U.S. and Canada){1202,7754}
1985/11/18

Canister Size Of Coolant Conditioner Element Has Changed{1350}
1985/11/25

Fuel Sulfur Analyzer Available{0651,1280,1318}
1986/01/13

Engine Oil Filter Element Has Metal Wrapper Instead Of Paper Wrapper{1318}
1986/03/10

Requirements For Shipping Wet Batteries In The U.S.{1401,7500}
1986/04/07

Three Types Of Maintenance Management Publications Available For Engines{0374}
1986/06/09

New 5P7307 Engine Turning Tool Group Fits All Engines{0611}
1977/02/14

Tools To Remove Wear Sleeves From Crankshafts{0621,7558}
1977/04/18

Improved 5P3000 Engine And Transmission Shipping Stand Assembly; Modification Available For Stands Already In Use{0640}
1977/04/25

Safety Vent Caps For Caterpillar Batteries{1401}
1977/07/11

Tools Now Available To Ream And/Or Hone 0.500" (12.70 mm) Diameter Valve Guides{0663}
1977/08/22

Water Separators Needed On Machines And Engines In The Field With SMFS{1250,0336}
1977/12/05

Polarity Connections And Use Of Service Meter Films When Service Meter Kits Are Installed{7480,7000}
1987/02/16

Check For Plugged Orifices In Mechanical Pressure Gauges{7450}
1987/03/02

New 8T5261 Bushing Installer And Remover Adapter Tool Available{0600}
1987/03/02

Stop Engine If There Is A Turbocharger Bearing Failure{1052,1318}
1987/04/06

Use 6V100 Tool Arrangement To Remove And Install Piston Pin Bearings For Both Tapered And Standard Connecting Rods{0620,1218}
1978/04/24

Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24

Improved Water Separator Element And Retaining Clamp Stops Fuel Leakage{1250}
1978/04/24

Water Separator Added To Give Protection To The Sleeve Metering Fuel System{1250}
1978/05/01

Use New Main Bearings In Replacement Cylinder Blocks{1203,1201}
1978/06/12

Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25

Modification To Rack Adjusting Tool Needed For Higher Rack Settings{0654,1257}
1978/10/16

Analyzing Caterpillar And Competitive Antifreezes For Amount Of Silicates{1350,1395}
1988/02/22

New Publication Available-"Diesel Fuels And Your Engine"{0374,0375,0645}
1988/03/21

Extraction Tools For "Live Oil Sampling"{7770,0770,0781,0783,0784}
1988/04/18

Current Chart For Dynamometer Adapters{0651,1000}
1979/01/22

Use Correct Procedure To Clean The Engine Lubrication System If Permanent Type Antifreeze (Ethylene Glycol) Is In The Engine{1318,1350}
1979/02/19

9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28

A New Method To Clean And Polish Engine Valve Stems{0674,1105}
1979/05/28

Check Crankshaft Seals During Installation Of Engine Overhaul Gasket Kits; Add A Wear Sleeve When Needed{7555,7558,1161}
1979/06/04

New Specification For Installation Of Camshaft Front Bearing In Cylinder Block{1211}
1979/06/11

Caution Label Added To 5P4150 Nozzle Testing Group{0651}
1979/07/09

Splash Shields Added To Caterpillar Fuel Injection Test Bench{0652}
1979/08/13

Sealant Now Used On Pipe Plugs At The Bottom Of The Oil Filter Base Assembly To Prevent Oil Leakage{1306}
1979/08/13

Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27

Engine Oil Viscosity Changed To SAE 10W/30 For Shipment From All U.S. Factories{1318}
1979/10/15

Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17

New Publication Available-"Coolant And Your Engine"{1395,0374,0375}
1989/02/13

New Engine Wall Charts Give Maintenance Management Recommendations{0374,0375,7500,7557,7580}
1989/03/06

Preventive Maintenance For Batteries{1401}
1989/03/27

Special Instruction, "Battery Charging Rate And Time Tables," Available On Oil Resistant Paper{0374,1401}
1989/06/19

Engine Coolant Can Be Recycled{1395}
1989/11/13

New Cooling System Cleaner Now Available For All Engines{1350,0680,1352,1353}
1989/12/25

Updated List Of Charts And Decals Available For Lubrication And Maintenance Intervals{0374,0375,7500,7557,7581}
1990/08/06

Use Only Stainless Steel Cylinder Liner Shims To Salvage Damaged 4.75" Bore Cylinder Blocks{1201,1216,1217}
1990/11/19

Checking Crankshaft Journal Surface Hardness On Remanufactured Crankshafts{1202}
1991/01/07

New Shaft Bracket And Oil Supply Plug Used In Rocker Valve Shaft Assembly{1102,7553}
1991/03/25

Air Filter Maintenance{1051,1054}
1991/09/30

Light Green Gasket Material On Secondary Air Filter Elements May Stick To Filter Housing{1054,1051}
1992/02/10

Updated List Of Charts And Decals Available For Lubrication And Maintenance Intervals{0374,0375,7557}
1994/04/04

Lubricant Will Ease Installation Of Secondary Radial Seal Air Filter Element {1054}
1994/04/25

Different Fuel Filter Available To Prevent Premature Wear On Fuel Injection Pump Plungers And Barrels{1261,1251}
1994/07/11

New Guideline For Product Information, SEBF8340, " Fuel Systems Troubleshooting Guide For 3204, 3300, And 3400 Engines With New Scroll Fuel Systems (NSFS)" Available {0374,1250}
1998/06/22

Interactive Self-Paced Computer Training Course Available forTechnical Marketing Information (TMI) System Users {0314}
2000/01/31

Service Information System Product Structure Link Change for Service Letters that Address Parts Stock Distribution {1000, 7000, 7750}
2001/08/20

Correction to Service Magazine , "Use the Technical Information Feedback Systems" {0374}
2001/12/03

A New Quick Coupler is Required to Extend the Service Life of Dual Purpose Valves {6129, 7542}
2002/01/21

Use Conductive Fasteners for Electrical Grounding on All Cat Products {7553, 7556}
2012/05/08

TA2 (Technical Analysis) Inspections are Now Available on SIS {0372, 1000, 7000, 753T, 7565}
2013/01/10

A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}

Military Electronic Technician (Military ET) Is Now Available For Military Personnel {0374, 0376, 0599, 1000, 7000, 7610, 7620}
Military Electronic Technician (Military ET) Is Now Available For Military Personnel {0374, 0376, 0599, 1000, 7000, 7610, 7620}

Process to Print Collage Schematics {0374, 1000, 7000}
Process to Print Collage Schematics {0374, 1000, 7000}

New Service Information Content Is Now Available in Channel 1 {0374, 7000}
New Service Information Content Is Now Available in Channel 1 {0374, 7000}

New Seventeen Character Product Identification Number (PIN) {7557}
2001/03/19

Remove The Paint From The Seal Counterbore On Track Links For Sealed And Lubricated Track{4169}
1977/09/05

Use Only Paint To Mark Connecting Rod Caps For Torque-Turn Method {1218,1219}
1987/06/01

New Engine Wall Charts Give Maintenance Management Recommendations{0374,0375,7500,7557,7580}
1989/03/06

Updated List Of Charts And Decals Available For Lubrication And Maintenance Intervals{0374,0375,7500,7557,7581}
1990/08/06

Shop Chemicals are now Listed in Cat Shop Supplies and Hand Tools {0599, 0644, 0645}
2005/12/12

Truck Engine News

The Color of Certain O-Ring Seals Is Changing {7555}
2002/12/01

Engine News

The Color of Certain O-Ring Seals Is Changing {7555}
2003/01/01

Technical Information Bulletin

Caterpillar Parts Pricing{1000, 7000, 756P}
Caterpillar Parts Pricing{1000, 7000, 756P}

Service Magazine

Improved Seal Kits for Cylinder Liner Kits {1216}
2005/11/14

Special Instruction

Procedure for Ordering Vintage Parts {0374, 1000, 7000}
Procedure for Ordering Vintage Parts {0374, 1000, 7000}

Service Letter-NACD

PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REMOVING 0R3023 REMAN CAMSHAFT KITS FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REMOVING 0R3023 REMAN CAMSHAFT KITS FROM DEALER PARTS STOCK

Certain New And Remanufactured Brake Bands Need To Be Removed From Parts Stock
Certain New And Remanufactured Brake Bands Need To Be Removed From Parts Stock

Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock

The 8P4547 And 8P4548 Gears Need To Be Removed From Parts Stock And Changed Out Of 2P9239 Pump Assemblies
The 8P4547 And 8P4548 Gears Need To Be Removed From Parts Stock And Changed Out Of 2P9239 Pump Assemblies

The Plastic Impeller Needs To Be Removed From Certain Water Pumps In Parts Stock And Replaced With A Cast Iron Impeller.
The Plastic Impeller Needs To Be Removed From Certain Water Pumps In Parts Stock And Replaced With A Cast Iron Impeller.

Certain Track Seal Sets For Use In D4H Through D11R Tractors Need To Be Removed From Parts Stock
Certain Track Seal Sets For Use In D4H Through D11R Tractors Need To Be Removed From Parts Stock

Service Letter-Australia

PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REMOVING 0R3023 REMAN CAMSHAFT KITS FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REMOVING 0R3023 REMAN CAMSHAFT KITS FROM DEALER PARTS STOCK

Certain New And Remanufactured Brake Bands Need To Be Removed From Parts Stock
Certain New And Remanufactured Brake Bands Need To Be Removed From Parts Stock

Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock

The 8P4547 And 8P4548 Gears Need To Be Removed From Parts Stock And Changed Out Of 2P9239 Pump Assemblies
The 8P4547 And 8P4548 Gears Need To Be Removed From Parts Stock And Changed Out Of 2P9239 Pump Assemblies

The Plastic Impeller Needs To Be Removed From Certain Water Pumps In Parts Stock And Replaced With A Cast Iron Impeller.
The Plastic Impeller Needs To Be Removed From Certain Water Pumps In Parts Stock And Replaced With A Cast Iron Impeller.

Certain Track Seal Sets For Use In D4H Through D11R Tractors Need To Be Removed From Parts Stock
Certain Track Seal Sets For Use In D4H Through D11R Tractors Need To Be Removed From Parts Stock

Service Letter-CFEL

PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REMOVING 0R3023 REMAN CAMSHAFT KITS FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REMOVING 0R3023 REMAN CAMSHAFT KITS FROM DEALER PARTS STOCK

Certain New And Remanufactured Brake Bands Need To Be Removed From Parts Stock
Certain New And Remanufactured Brake Bands Need To Be Removed From Parts Stock

Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock

The 8P4547 And 8P4548 Gears Need To Be Removed From Parts Stock And Changed Out Of 2P9239 Pump Assemblies
The 8P4547 And 8P4548 Gears Need To Be Removed From Parts Stock And Changed Out Of 2P9239 Pump Assemblies

The Plastic Impeller Needs To Be Removed From Certain Water Pumps In Parts Stock And Replaced With A Cast Iron Impeller.
The Plastic Impeller Needs To Be Removed From Certain Water Pumps In Parts Stock And Replaced With A Cast Iron Impeller.

Certain Track Seal Sets For Use In D4H Through D11R Tractors Need To Be Removed From Parts Stock
Certain Track Seal Sets For Use In D4H Through D11R Tractors Need To Be Removed From Parts Stock

Service Letter-CSARL

PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REMOVING 0R3023 REMAN CAMSHAFT KITS FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REMOVING 0R3023 REMAN CAMSHAFT KITS FROM DEALER PARTS STOCK

Certain New And Remanufactured Brake Bands Need To Be Removed From Parts Stock
Certain New And Remanufactured Brake Bands Need To Be Removed From Parts Stock

Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock

The 8P4547 And 8P4548 Gears Need To Be Removed From Parts Stock And Changed Out Of 2P9239 Pump Assemblies
The 8P4547 And 8P4548 Gears Need To Be Removed From Parts Stock And Changed Out Of 2P9239 Pump Assemblies

The Plastic Impeller Needs To Be Removed From Certain Water Pumps In Parts Stock And Replaced With A Cast Iron Impeller.
The Plastic Impeller Needs To Be Removed From Certain Water Pumps In Parts Stock And Replaced With A Cast Iron Impeller.

Certain Track Seal Sets For Use In D4H Through D11R Tractors Need To Be Removed From Parts Stock
Certain Track Seal Sets For Use In D4H Through D11R Tractors Need To Be Removed From Parts Stock

Service Letter-Americas

PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REMOVING 0R3023 REMAN CAMSHAFT KITS FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REMOVING 0R3023 REMAN CAMSHAFT KITS FROM DEALER PARTS STOCK

Certain New And Remanufactured Brake Bands Need To Be Removed From Parts Stock
Certain New And Remanufactured Brake Bands Need To Be Removed From Parts Stock

Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock

The 8P4547 And 8P4548 Gears Need To Be Removed From Parts Stock And Changed Out Of 2P9239 Pump Assemblies
The 8P4547 And 8P4548 Gears Need To Be Removed From Parts Stock And Changed Out Of 2P9239 Pump Assemblies

The Plastic Impeller Needs To Be Removed From Certain Water Pumps In Parts Stock And Replaced With A Cast Iron Impeller.
The Plastic Impeller Needs To Be Removed From Certain Water Pumps In Parts Stock And Replaced With A Cast Iron Impeller.

Certain Track Seal Sets For Use In D4H Through D11R Tractors Need To Be Removed From Parts Stock
Certain Track Seal Sets For Use In D4H Through D11R Tractors Need To Be Removed From Parts Stock

Service Letter-Brazil

Certain New And Remanufactured Brake Bands Need To Be Removed From Parts Stock
Certain New And Remanufactured Brake Bands Need To Be Removed From Parts Stock

Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock

The 8P4547 And 8P4548 Gears Need To Be Removed From Parts Stock And Changed Out Of 2P9239 Pump Assemblies
The 8P4547 And 8P4548 Gears Need To Be Removed From Parts Stock And Changed Out Of 2P9239 Pump Assemblies

The Plastic Impeller Needs To Be Removed From Certain Water Pumps In Parts Stock And Replaced With A Cast Iron Impeller.
The Plastic Impeller Needs To Be Removed From Certain Water Pumps In Parts Stock And Replaced With A Cast Iron Impeller.

Certain Track Seal Sets For Use In D4H Through D11R Tractors Need To Be Removed From Parts Stock
Certain Track Seal Sets For Use In D4H Through D11R Tractors Need To Be Removed From Parts Stock

Service Letter-Truck/Ag/Marine

PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REMOVING 0R3023 REMAN CAMSHAFT KITS FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REMOVING 0R3023 REMAN CAMSHAFT KITS FROM DEALER PARTS STOCK

Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock

The Plastic Impeller Needs To Be Removed From Certain Water Pumps In Parts Stock And Replaced With A Cast Iron Impeller.
The Plastic Impeller Needs To Be Removed From Certain Water Pumps In Parts Stock And Replaced With A Cast Iron Impeller.

Technical Information Bulletin

Caterpillar Parts Pricing{1000, 7000, 756P}
Caterpillar Parts Pricing{1000, 7000, 756P}

A Recommendation for Initial Parts Stock Quantities Will Now Be Included in Service Letters{1000, 7000, 7751, 7752}
A Recommendation for Initial Parts Stock Quantities Will Now Be Included in Service Letters{1000, 7000, 7751, 7752}

Service Letter-China

PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REMOVING 0R3023 REMAN CAMSHAFT KITS FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REMOVING 0R3023 REMAN CAMSHAFT KITS FROM DEALER PARTS STOCK

Certain New And Remanufactured Brake Bands Need To Be Removed From Parts Stock
Certain New And Remanufactured Brake Bands Need To Be Removed From Parts Stock

Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock

The 8P4547 And 8P4548 Gears Need To Be Removed From Parts Stock And Changed Out Of 2P9239 Pump Assemblies
The 8P4547 And 8P4548 Gears Need To Be Removed From Parts Stock And Changed Out Of 2P9239 Pump Assemblies

The Plastic Impeller Needs To Be Removed From Certain Water Pumps In Parts Stock And Replaced With A Cast Iron Impeller.
The Plastic Impeller Needs To Be Removed From Certain Water Pumps In Parts Stock And Replaced With A Cast Iron Impeller.

Certain Track Seal Sets For Use In D4H Through D11R Tractors Need To Be Removed From Parts Stock
Certain Track Seal Sets For Use In D4H Through D11R Tractors Need To Be Removed From Parts Stock

Service Letter-Asia

PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REMOVING 0R3023 REMAN CAMSHAFT KITS FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REMOVING 0R3023 REMAN CAMSHAFT KITS FROM DEALER PARTS STOCK

Certain New And Remanufactured Brake Bands Need To Be Removed From Parts Stock
Certain New And Remanufactured Brake Bands Need To Be Removed From Parts Stock

Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock

The 8P4547 And 8P4548 Gears Need To Be Removed From Parts Stock And Changed Out Of 2P9239 Pump Assemblies
The 8P4547 And 8P4548 Gears Need To Be Removed From Parts Stock And Changed Out Of 2P9239 Pump Assemblies

The Plastic Impeller Needs To Be Removed From Certain Water Pumps In Parts Stock And Replaced With A Cast Iron Impeller.
The Plastic Impeller Needs To Be Removed From Certain Water Pumps In Parts Stock And Replaced With A Cast Iron Impeller.

Certain Track Seal Sets For Use In D4H Through D11R Tractors Need To Be Removed From Parts Stock
Certain Track Seal Sets For Use In D4H Through D11R Tractors Need To Be Removed From Parts Stock

Service Letter-APD

PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REMOVING 0R3023 REMAN CAMSHAFT KITS FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REMOVING 0R3023 REMAN CAMSHAFT KITS FROM DEALER PARTS STOCK

Certain New And Remanufactured Brake Bands Need To Be Removed From Parts Stock
Certain New And Remanufactured Brake Bands Need To Be Removed From Parts Stock

Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock

The 8P4547 And 8P4548 Gears Need To Be Removed From Parts Stock And Changed Out Of 2P9239 Pump Assemblies
The 8P4547 And 8P4548 Gears Need To Be Removed From Parts Stock And Changed Out Of 2P9239 Pump Assemblies

The Plastic Impeller Needs To Be Removed From Certain Water Pumps In Parts Stock And Replaced With A Cast Iron Impeller.
The Plastic Impeller Needs To Be Removed From Certain Water Pumps In Parts Stock And Replaced With A Cast Iron Impeller.

Certain Track Seal Sets For Use In D4H Through D11R Tractors Need To Be Removed From Parts Stock
Certain Track Seal Sets For Use In D4H Through D11R Tractors Need To Be Removed From Parts Stock

Service Magazine

Piston And Connecting Rod Assembly Storage Cabinet{0600}
1982/01/18

Engine Storage; Engine Start-Up After Storage{1000}
1982/02/22

New Bearing Standard: Quantity Of One Part Number Now Has Both Halves Of The Bearing{7551}
1982/08/09

Reference Chart For Service Magazine Articles On Improvements To All 3300 Series Engines{0374}
1983/06/06

Part Numbers Of Bearings To Use For Service Replacement In Fuel Injection Pump Housings For Sleeve Metering Fuel Systems; Correction To Special Instruction For Installation.{1253}
1979/05/07

Special Instruction

Use Of Preventive Maintenance Kits{7501}
Use Of Preventive Maintenance Kits{7501}

Service Magazine

Preventive Maintenance For Batteries{1401}
1989/03/27

Engine News

Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {1000, 1052, 1087}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {1000, 1052, 1087}

Special Instruction

Installation Of 7N4295 Rebuild Kit For Refrigerant Compressor - Clutch And Drive{1802}
Installation Of 7N4295 Rebuild Kit For Refrigerant Compressor - Clutch And Drive{1802}

2W725 Turbocharger Cartridge Repair Kit{1053}
2W725 Turbocharger Cartridge Repair Kit{1053}

Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}

7W4872 Turbocharger Cartridge Repair Kit{1053}
7W4872 Turbocharger Cartridge Repair Kit{1053}

Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}

Hose Inspection Form {0374, 0599, 5057, 5057}
Hose Inspection Form {0374, 0599, 5057, 5057}

Tool Operating Manual

1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}

439-3938, 439-3939, 439-3940, 439-3941, 439-3942, 439-3943 Link Bracket Assemblies {0374, 0599, 0632, 0700, 7000}
439-3938, 439-3939, 439-3940, 439-3941, 439-3942, 439-3943 Link Bracket Assemblies {0374, 0599, 0632, 0700, 7000}

1U-9600 Welding Group (U.S. and Canada) 1U-9601 Welding Group (All other countries){0599, 0679}
1U-9600 Welding Group (U.S. and Canada) 1U-9601 Welding Group (All other countries){0599, 0679}

CRB Valve Spring Testers 8S-2263 and 4C-9496{0374, 0599, 0700, 0701, 1108}
CRB Valve Spring Testers 8S-2263 and 4C-9496{0374, 0599, 0700, 0701, 1108}

Crimping Permanent Couplings Using the 136-3642 Crimp Tool Group in Combination and XT Hose Machines{0374, 0599, 0684, 5057}
Crimping Permanent Couplings Using the 136-3642 Crimp Tool Group in Combination and XT Hose Machines{0374, 0599, 0684, 5057}

Crimping 1028 Thermoplastic Hose, 2760 Reduced Diameter Thermoplastic Hose, and 1543 Air Conditioning Hose{0374, 0599, 0684, 1808, 1812, 7554}
Crimping 1028 Thermoplastic Hose, 2760 Reduced Diameter Thermoplastic Hose, and 1543 Air Conditioning Hose{0374, 0599, 0684, 1808, 1812, 7554}

150T Track Repair Group Field Follow Tools, Operation, and Parts {0374, 0700, 0729, 4169, 4170, 4171}
150T Track Repair Group Field Follow Tools, Operation, and Parts {0374, 0700, 0729, 4169, 4170, 4171}

464-0265 Lifting Bracket Assembly{0374, 0599, 0629, 0632, 0700, 0708, 1353}
464-0265 Lifting Bracket Assembly{0374, 0599, 0629, 0632, 0700, 0708, 1353}

442-1750 Lifting Plate{0374, 0599, 0629, 0632, 0700, 1122}
442-1750 Lifting Plate{0374, 0599, 0629, 0632, 0700, 1122}

NEHS1249 100T Track Repair Group {0374, 0599, 0700, 0729, 4169, 4170}
NEHS1249 100T Track Repair Group {0374, 0599, 0700, 0729, 4169, 4170}

NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}

{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}

M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}

Portable Aqueous Based Parts Cleaners, Models 482-9830, 482-9831, and 482-9832 {0374, 0599, 0680, 0699}
Portable Aqueous Based Parts Cleaners, Models 482-9830, 482-9831, and 482-9832 {0374, 0599, 0680, 0699}

Undercarriage Reconditioning Bulletin

Reconditioning Procedure for Seal Ramps on Inverted Style Idler and Roller Shafts {0729, 4150, 4154, 4159, 6433, 7561}
Reconditioning Procedure for Seal Ramps on Inverted Style Idler and Roller Shafts {0729, 4150, 4154, 4159, 6433, 7561}

Reuse And Salvage Guidelines

Fundamentals of Arc Spray for Reconditioning Components {0679}
Fundamentals of Arc Spray for Reconditioning Components {0679}

Fundamentals of Flame Spray for Reconditioning Components {0100, 0599, 0679}
Fundamentals of Flame Spray for Reconditioning Components {0100, 0599, 0679}

Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}

Thermal Spray Procedures for Clutch Housing Piston Bore {0679, 3160, 3169}
Thermal Spray Procedures for Clutch Housing Piston Bore {0679, 3160, 3169}

Thermal Spray Procedures for Clutch Piston Inside Diameter {0679, 3160, 3170}
Thermal Spray Procedures for Clutch Piston Inside Diameter {0679, 3160, 3170}

Thermal Spray Procedures for Torque Converter Output Flange {0679, 3101}
Thermal Spray Procedures for Torque Converter Output Flange {0679, 3101}

Thermal Spray Procedures for Torque Converter Carrier - Bearing Diameter {0679, 3101, 3135}
Thermal Spray Procedures for Torque Converter Carrier - Bearing Diameter {0679, 3101, 3135}

Thermal Spray Procedures for Pump Gear Drive Inside Diameter{0374, 0599, 0679, 3101}
Thermal Spray Procedures for Pump Gear Drive Inside Diameter{0374, 0599, 0679, 3101}

Thermal Spray Procedures for Torque Converter Turbine Wheel {0679, 3101, 3131}
Thermal Spray Procedures for Torque Converter Turbine Wheel {0679, 3101, 3131}

Thermal Spray Procedures for Torque Converter Impeller {0679, 3101, 3134}
Thermal Spray Procedures for Torque Converter Impeller {0679, 3101, 3134}

Thermal Spray Procedures for Transmission, Torque Converter and Torque Divider Shafts {0679, 0719, 3030, 3101, 3125, 3130}
Thermal Spray Procedures for Transmission, Torque Converter and Torque Divider Shafts {0679, 0719, 3030, 3101, 3125, 3130}

Thermal Spray Procedures for Torque Converter Carrier - Seal Ring Bore {0374, 0599, 0679, 3101, 3135}
Thermal Spray Procedures for Torque Converter Carrier - Seal Ring Bore {0374, 0599, 0679, 3101, 3135}

Thermal Spray Procedures for Torque Converter Input Housing {0679, 3101, 3127}
Thermal Spray Procedures for Torque Converter Input Housing {0679, 3101, 3127}

Thermal Spray Procedures for Tyrone Drive Shaft (Pump Gear){0679, 3066, 5073}
Thermal Spray Procedures for Tyrone Drive Shaft (Pump Gear){0679, 3066, 5073}

Thermal Spray Procedures for TTT Sprocket Hub Bearing Bores {0374, 0599, 0679, 4050}
Thermal Spray Procedures for TTT Sprocket Hub Bearing Bores {0374, 0599, 0679, 4050}

Thermal Spray Procedures for Transmission and Torque Converter Yokes {0599, 0679, 3001, 3030, 3101, 3160}
Thermal Spray Procedures for Transmission and Torque Converter Yokes {0599, 0679, 3001, 3030, 3101, 3160}

Thermal Spray Procedures for Bevel Gear Shafts{0679, 3256}
Thermal Spray Procedures for Bevel Gear Shafts{0679, 3256}

Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}

Thermal Spray Procedures for Torque Converter Flange - Bearing Diameter {0679, 3101}
Thermal Spray Procedures for Torque Converter Flange - Bearing Diameter {0679, 3101}

Thermal Spray Procedures for TTT Bearing Sleeves{0599, 0679, 4151, 4153, 4157, 4158, 4159, 4169, 4171, 7206}
Thermal Spray Procedures for TTT Bearing Sleeves{0599, 0679, 4151, 4153, 4157, 4158, 4159, 4169, 4171, 7206}

Thermal Spray Procedures for TTT Dozer Yokes {0599, 0679, 7562}
Thermal Spray Procedures for TTT Dozer Yokes {0599, 0679, 7562}

Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}

Thermal Spray Procedure for D7H - D11R TTT Pivot Shafts {0374, 0599, 0679, 4151}
Thermal Spray Procedure for D7H - D11R TTT Pivot Shafts {0374, 0599, 0679, 4151}

Reuse and Salvage for Gear Train and Gear Shafts on Engines {0679, 1151, 1162, 1206}
Reuse and Salvage for Gear Train and Gear Shafts on Engines {0679, 1151, 1162, 1206}

Application of Abrasion Resistant Material{0374, 0679, 0751, 0759, 6800}
Application of Abrasion Resistant Material{0374, 0679, 0751, 0759, 6800}

Scrap Barrel Analysis {0374, 0599, 0700, 0701, 0738, 1000, 7000}
Scrap Barrel Analysis {0374, 0599, 0700, 0701, 0738, 1000, 7000}

Fundamentals of Plasma Transferred Wire Arc (PTWA) Spray for Reconditioning Components {0374, 0599, 0679, 1000}
Fundamentals of Plasma Transferred Wire Arc (PTWA) Spray for Reconditioning Components {0374, 0599, 0679, 1000}

Service Magazine

Use Of A Flex-Hone For Cylinder Liner Reconditioning{0664,0674,1216}
1981/12/21

Use 6V6147 Polishing Wheel To Clean Piston Pins{0675,1214}
1982/11/08

Reuse Of Engine Bearings{1230}
1983/05/16

Reference Chart For Service Magazine Articles On Improvements To All 3300 Series Engines{0374}
1983/06/06

Reuse Of Engine Bearings{1230,1219,1203}
1983/11/21

Special Instructions Packaged With Turbocharger Cartridge Repair Kits May Be Incorrect{1053}
1986/02/03

Increase Piston Reuse With Keystone Piston Ring Gauge Group{1214,1215}
1986/06/16

Correct Rebuild Kits Must Be Used For Repair Of Earlier And Later Water Pumps{1361}
1977/06/27

Salvage Of Cylinder Heads By Using Oversized Valve Guides And Valve Inserts {1104,1103}
1987/03/30

New Information On Reusable Cylinder Liners{1216}
1978/06/19

Salvage Of Turbocharger Compressor Housing During Reconditioning{1052}
1978/10/09

A New Method To Clean And Polish Engine Valve Stems{0674,1105}
1979/05/28

Check Crankshaft Seals During Installation Of Engine Overhaul Gasket Kits; Add A Wear Sleeve When Needed{7555,7558,1161}
1979/06/04

Turbocharger Bearings Are Now Available In More Different Sizes For Better Turbocharger Reconditioning{1053}
1979/08/20

Use Only Stainless Steel Cylinder Liner Shims To Salvage Damaged 4.75" Bore Cylinder Blocks{1201,1216,1217}
1990/11/19

Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}

Truck Engine News

A Guide to Reman Product Markings is Now Available {7754}
2015/09/18

Engine News

A Guide to Reman Product Markings is Now Available {7754}
2015/09/17

Special Instruction

Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}

Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}

Installation Of 0R2554 Remanufactured Short Block Group{1200}
Installation Of 0R2554 Remanufactured Short Block Group{1200}

A Guide to Cat® Reman Product Markings {7754}
A Guide to Cat^® Reman Product Markings {7754}

Service Letter-NACD

Certain New And Remanufactured Brake Bands Need To Be Removed From Parts Stock
Certain New And Remanufactured Brake Bands Need To Be Removed From Parts Stock

The 3J2452 Ball Joint Cap On Certain 0R1308 Remanufactured Cylinder Rods Needs To Be Reworked
The 3J2452 Ball Joint Cap On Certain 0R1308 Remanufactured Cylinder Rods Needs To Be Reworked

Service Letter-Australia

Certain New And Remanufactured Brake Bands Need To Be Removed From Parts Stock
Certain New And Remanufactured Brake Bands Need To Be Removed From Parts Stock

The 3J2452 Ball Joint Cap On Certain 0R1308 Remanufactured Cylinder Rods Needs To Be Reworked
The 3J2452 Ball Joint Cap On Certain 0R1308 Remanufactured Cylinder Rods Needs To Be Reworked

Service Letter-CFEL

Certain New And Remanufactured Brake Bands Need To Be Removed From Parts Stock
Certain New And Remanufactured Brake Bands Need To Be Removed From Parts Stock

The 3J2452 Ball Joint Cap On Certain 0R1308 Remanufactured Cylinder Rods Needs To Be Reworked
The 3J2452 Ball Joint Cap On Certain 0R1308 Remanufactured Cylinder Rods Needs To Be Reworked

Service Letter-CSARL

Certain New And Remanufactured Brake Bands Need To Be Removed From Parts Stock
Certain New And Remanufactured Brake Bands Need To Be Removed From Parts Stock

The 3J2452 Ball Joint Cap On Certain 0R1308 Remanufactured Cylinder Rods Needs To Be Reworked
The 3J2452 Ball Joint Cap On Certain 0R1308 Remanufactured Cylinder Rods Needs To Be Reworked

Service Letter-Americas

Certain New And Remanufactured Brake Bands Need To Be Removed From Parts Stock
Certain New And Remanufactured Brake Bands Need To Be Removed From Parts Stock

The 3J2452 Ball Joint Cap On Certain 0R1308 Remanufactured Cylinder Rods Needs To Be Reworked
The 3J2452 Ball Joint Cap On Certain 0R1308 Remanufactured Cylinder Rods Needs To Be Reworked

Service Letter-Brazil

Certain New And Remanufactured Brake Bands Need To Be Removed From Parts Stock
Certain New And Remanufactured Brake Bands Need To Be Removed From Parts Stock

The 3J2452 Ball Joint Cap On Certain 0R1308 Remanufactured Cylinder Rods Needs To Be Reworked
The 3J2452 Ball Joint Cap On Certain 0R1308 Remanufactured Cylinder Rods Needs To Be Reworked

Tool Operating Manual

1U-9600 Welding Group (U.S. and Canada) 1U-9601 Welding Group (All other countries){0599, 0679}
1U-9600 Welding Group (U.S. and Canada) 1U-9601 Welding Group (All other countries){0599, 0679}

NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}

M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}

Service Letter-China

Certain New And Remanufactured Brake Bands Need To Be Removed From Parts Stock
Certain New And Remanufactured Brake Bands Need To Be Removed From Parts Stock

The 3J2452 Ball Joint Cap On Certain 0R1308 Remanufactured Cylinder Rods Needs To Be Reworked
The 3J2452 Ball Joint Cap On Certain 0R1308 Remanufactured Cylinder Rods Needs To Be Reworked

Service Letter-Asia

Certain New And Remanufactured Brake Bands Need To Be Removed From Parts Stock
Certain New And Remanufactured Brake Bands Need To Be Removed From Parts Stock

The 3J2452 Ball Joint Cap On Certain 0R1308 Remanufactured Cylinder Rods Needs To Be Reworked
The 3J2452 Ball Joint Cap On Certain 0R1308 Remanufactured Cylinder Rods Needs To Be Reworked

Reuse And Salvage Guidelines

Fundamentals of Arc Spray for Reconditioning Components {0679}
Fundamentals of Arc Spray for Reconditioning Components {0679}

Thermal Spray Procedures for Clutch Housing Piston Bore {0679, 3160, 3169}
Thermal Spray Procedures for Clutch Housing Piston Bore {0679, 3160, 3169}

Thermal Spray Procedures for Clutch Piston Inside Diameter {0679, 3160, 3170}
Thermal Spray Procedures for Clutch Piston Inside Diameter {0679, 3160, 3170}

Thermal Spray Procedures for Torque Converter Output Flange {0679, 3101}
Thermal Spray Procedures for Torque Converter Output Flange {0679, 3101}

Thermal Spray Procedures for Torque Converter Carrier - Bearing Diameter {0679, 3101, 3135}
Thermal Spray Procedures for Torque Converter Carrier - Bearing Diameter {0679, 3101, 3135}

Thermal Spray Procedures for Pump Gear Drive Inside Diameter{0374, 0599, 0679, 3101}
Thermal Spray Procedures for Pump Gear Drive Inside Diameter{0374, 0599, 0679, 3101}

Thermal Spray Procedures for Torque Converter Turbine Wheel {0679, 3101, 3131}
Thermal Spray Procedures for Torque Converter Turbine Wheel {0679, 3101, 3131}

Thermal Spray Procedures for Torque Converter Impeller {0679, 3101, 3134}
Thermal Spray Procedures for Torque Converter Impeller {0679, 3101, 3134}

Thermal Spray Procedures for Transmission, Torque Converter and Torque Divider Shafts {0679, 0719, 3030, 3101, 3125, 3130}
Thermal Spray Procedures for Transmission, Torque Converter and Torque Divider Shafts {0679, 0719, 3030, 3101, 3125, 3130}

Thermal Spray Procedures for Torque Converter Carrier - Seal Ring Bore {0374, 0599, 0679, 3101, 3135}
Thermal Spray Procedures for Torque Converter Carrier - Seal Ring Bore {0374, 0599, 0679, 3101, 3135}

Thermal Spray Procedures for Torque Converter Input Housing {0679, 3101, 3127}
Thermal Spray Procedures for Torque Converter Input Housing {0679, 3101, 3127}

Thermal Spray Procedures for Tyrone Drive Shaft (Pump Gear){0679, 3066, 5073}
Thermal Spray Procedures for Tyrone Drive Shaft (Pump Gear){0679, 3066, 5073}

Thermal Spray Procedures for TTT Sprocket Hub Bearing Bores {0374, 0599, 0679, 4050}
Thermal Spray Procedures for TTT Sprocket Hub Bearing Bores {0374, 0599, 0679, 4050}

Thermal Spray Procedures for Transmission and Torque Converter Yokes {0599, 0679, 3001, 3030, 3101, 3160}
Thermal Spray Procedures for Transmission and Torque Converter Yokes {0599, 0679, 3001, 3030, 3101, 3160}

Thermal Spray Procedures for Bevel Gear Shafts{0679, 3256}
Thermal Spray Procedures for Bevel Gear Shafts{0679, 3256}

Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}

Thermal Spray Procedures for Torque Converter Flange - Bearing Diameter {0679, 3101}
Thermal Spray Procedures for Torque Converter Flange - Bearing Diameter {0679, 3101}

Thermal Spray Procedures for TTT Bearing Sleeves{0599, 0679, 4151, 4153, 4157, 4158, 4159, 4169, 4171, 7206}
Thermal Spray Procedures for TTT Bearing Sleeves{0599, 0679, 4151, 4153, 4157, 4158, 4159, 4169, 4171, 7206}

Thermal Spray Procedures for TTT Dozer Yokes {0599, 0679, 7562}
Thermal Spray Procedures for TTT Dozer Yokes {0599, 0679, 7562}

Thermal Spray Procedure for D7H - D11R TTT Pivot Shafts {0374, 0599, 0679, 4151}
Thermal Spray Procedure for D7H - D11R TTT Pivot Shafts {0374, 0599, 0679, 4151}

Reuse and Salvage for Gear Train and Gear Shafts on Engines {0679, 1151, 1162, 1206}
Reuse and Salvage for Gear Train and Gear Shafts on Engines {0679, 1151, 1162, 1206}

Fundamentals of Plasma Transferred Wire Arc (PTWA) Spray for Reconditioning Components {0374, 0599, 0679, 1000}
Fundamentals of Plasma Transferred Wire Arc (PTWA) Spray for Reconditioning Components {0374, 0599, 0679, 1000}

Service Letter-APD

Certain New And Remanufactured Brake Bands Need To Be Removed From Parts Stock
Certain New And Remanufactured Brake Bands Need To Be Removed From Parts Stock

The 3J2452 Ball Joint Cap On Certain 0R1308 Remanufactured Cylinder Rods Needs To Be Reworked
The 3J2452 Ball Joint Cap On Certain 0R1308 Remanufactured Cylinder Rods Needs To Be Reworked

Service Magazine

Remanufactured Undersize Crankshafts Are Available{1202}
1983/11/21

Remanufactured Connecting Rod Assemblies{1218}
1984/01/23

Remanufactured Cylinder Head Groups{1100,1101,7554}
1984/11/19

Remanufactured Crankshafts Are Available In Standard And Two Undersize Dimensions (U.S. and Canada){1202,7754}
1985/11/18

Oversize Bearings For Turbocharger Center Housings Available {1053,1052}
1987/03/30

Remanufactured Heavy-Duty Starters And High-Amp Alternators{1405,1453}
1987/05/25

Asbestos-Free Remanufactured Brake Bands And Shoes{4110,4253}
1990/04/09

New Exhaust Valves Are Used In Caterpillar Remanufactured Cylinder Heads{1105,1101}
1990/10/08

Remanufactured Camshafts And Cam Kits Available For Parts Service{1210,1211,1212}
1990/12/17

Checking Crankshaft Journal Surface Hardness On Remanufactured Crankshafts{1202}
1991/01/07

Identification Of Remanufactured Direct Injection Fuel Nozzles (DIFN){1254}
1992/04/20

Be Sure To Use Correct Cup Plugs On 0R2077, 0R2554, And 0R3258 Remanufactured Short Blocks{1200,1201}
1992/11/23

A Guide to Reman Product Markings is Now Available {7754}
2015/09/15

Requirements For Shipping Wet Batteries In The U.S.{1401,7500}
1986/04/07

Improved 5P3000 Engine And Transmission Shipping Stand Assembly; Modification Available For Stands Already In Use{0640}
1977/04/25

New Engine Wall Charts Give Maintenance Management Recommendations{0374,0375,7500,7557,7580}
1989/03/06

Updated List Of Charts And Decals Available For Lubrication And Maintenance Intervals{0374,0375,7500,7557,7581}
1990/08/06

Lubricity Limit Added To Preferred Distillate Fuel Recommendation {1280,7568}
1997/08/18

Direct Shipping Process and New Packaging for Replacement Glass {7301, 7308, 7310, 7325}
2007/03/26

Engine News

The 237-5130 Digital Multimeter Gp Features a Built-in Infrared Thermometer {0785}
2004/04/19

Special Instruction

Troubleshooting And Repair Of The 5P2160 Engine Horsepower Meter Arrangement*{0781, 0782}
Troubleshooting And Repair Of The 5P2160 Engine Horsepower Meter Arrangement^*{0781, 0782}

Using The 5P2160 Engine Horsepower Meter Arrangement*{0781, 0782}
Using The 5P2160 Engine Horsepower Meter Arrangement^*{0781, 0782}

Troubleshooting And Repair Of The 1P3500 And 2P8280 Injection Timing Groups{0782}
Troubleshooting And Repair Of The 1P3500 And 2P8280 Injection Timing Groups{0782}

Using The 5P-4150 Nozzle Testing Group{0782}
Using The 5P-4150 Nozzle Testing Group{0782}

Use of Piston Pin Bearing Removal and Installation Tools{1218}
Use of Piston Pin Bearing Removal and Installation Tools{1218}

Using The 4S6553 Engine Evaluation Test Group{0781}
Using The 4S6553 Engine Evaluation Test Group{0781}

Installation Of 6V124 Drive Coupling Modification Kit{0650, 0706, 1250}
Installation Of 6V124 Drive Coupling Modification Kit{0650, 0706, 1250}

Service Information And Use of 6V3100 Engine Timing Indicator Group{0782}
Service Information And Use of 6V3100 Engine Timing Indicator Group{0782}

6V2150 Starting And Charging Analyzer Operating InstructionsFor More Information See Special Instruction SEHS7768{1406, 7569}
6V2150 Starting And Charging Analyzer Operating InstructionsFor More Information See Special Instruction SEHS7768{1406, 7569}

Use Of 6V4095 Or 6V4096 Pump And Governor Tool Groups{650, 1250}
Use Of 6V4095 Or 6V4096 Pump And Governor Tool Groups{650, 1250}

Using The 6V4060 Engine Set Point Indicator Group{0781}
Using The 6V4060 Engine Set Point Indicator Group{0781}

Using The 6V4950 Injection Line Speed Pickup Group{0782}
Using The 6V4950 Injection Line Speed Pickup Group{0782}

Use of 6V7020 Nozzle Puller Group{0621}
Use of 6V7020 Nozzle Puller Group{0621}

Electronic Repair Of 6V3100 Diesel Engine Timing Indicator{0651, 1250}
Electronic Repair Of 6V3100 Diesel Engine Timing Indicator{0651, 1250}

Use And Repair Of The 6V7925 Fuel Rate Indicator{0782}
Use And Repair Of The 6V7925 Fuel Rate Indicator{0782}

Using 8S2305, 9S228, And 6V9128 Rack Position Tool Groups{0782, 1250}
Using 8S2305, 9S228, And 6V9128 Rack Position Tool Groups{0782, 1250}

Use And Maintenance Of 8T0910 Fuel Sulfur Analyzer Group{0786, 1280}
Use And Maintenance Of 8T0910 Fuel Sulfur Analyzer Group{0786, 1280}

Using Caterpillar Cylinder Pack Pulling Tools{1239}
Using Caterpillar Cylinder Pack Pulling Tools{1239}

Use of 8T5200 Signal Generator/Counter Group{0778, 0783, 0785}
Use of 8T5200 Signal Generator/Counter Group{0778, 0783, 0785}

Using The 8T1000 Position Indicator Group{0760, 0762}
Using The 8T1000 Position Indicator Group{0760, 0762}

Use of the 4C6534 Speed Switch Calibration Harness{0781, 0785}
Use of the 4C6534 Speed Switch Calibration Harness{0781, 0785}

Using the 1U6602 Photo-Tach Group{0775}
Using the 1U6602 Photo-Tach Group{0775}

Using the 1U5470 Engine Pressure Group{0781}
Using the 1U5470 Engine Pressure Group{0781}

Use of the 4C3502 Engine Repair Indicator Kit{0781, 1000}
Use of the 4C3502 Engine Repair Indicator Kit{0781, 1000}

Using the 4C6821 Injection Line Speed Pickup Group{0781}
Using the 4C6821 Injection Line Speed Pickup Group{0781}

Use Of 6V3180 Sprocket Tool Arrangement{4058, 4164}
Use Of 6V3180 Sprocket Tool Arrangement{4058, 4164}

Installing Crankshaft Seals And Wear Sleeves Using The Former 9S8868, 9S8873, 9S8881 And 9S8888 Tools Groups{1160, 1161, 0704}
Installing Crankshaft Seals And Wear Sleeves Using The Former 9S8868, 9S8873, 9S8881 And 9S8888 Tools Groups{1160, 1161, 0704}

Use Of 3P2200 Calibration Tool Group{0650, 1250}
Use Of 3P2200 Calibration Tool Group{0650, 1250}

Using The 5P6524 Engine Timing Indicator Group And 1P540 Flow Checking Tool Group{0782, 1000}
Using The 5P6524 Engine Timing Indicator Group And 1P540 Flow Checking Tool Group{0782, 1000}

Operation And Maintenance Of 1P3060 Pyrometer Group{0776}
Operation And Maintenance Of 1P3060 Pyrometer Group{0776}

Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}

Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}

Using The 5P2050 Connecting Rod Checking Fixture{0767, 1218}
Using The 5P2050 Connecting Rod Checking Fixture{0767, 1218}

Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}

Use Of 8T0455 Cylinder Liner Projection Indicator Group{0760, 1216}
Use Of 8T0455 Cylinder Liner Projection Indicator Group{0760, 1216}

Use Of 6V4141 Sleeve Metering Calibration Tool Group{0778, 0782}
Use Of 6V4141 Sleeve Metering Calibration Tool Group{0778, 0782}

Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}

Using The 6V7899 Size Setting Fixture Group{651}
Using The 6V7899 Size Setting Fixture Group{651}

Using the 6V7870 Fixture Group and 6V7872 Pliers{1250, 1251}
Using the 6V7870 Fixture Group and 6V7872 Pliers{1250, 1251}

Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}

7000 Series Nozzles{0782}
7000 Series Nozzles{0782}

Using 5P4175 Boring Tool Group And 5P1618 Tool Arrangement{0672, 1200}
Using 5P4175 Boring Tool Group And 5P1618 Tool Arrangement{0672, 1200}

Tool and Specification Chart for Inverted Duo-Cone Seals {0599, 7561}
Tool and Specification Chart for Inverted Duo-Cone Seals {0599, 7561}

Tool and Specification Chart for Conventional Duo-Cone Seal Groups {0599, 7561}
Tool and Specification Chart for Conventional Duo-Cone Seal Groups {0599, 7561}

Service Letter-NACD

PRODUCT SUPPORT PROGRAM FOR INSTALLING PRODUCT LINK PL542 OR PL240B CELLULAR RADIO SYSTEMS OR UPDATING SOFTWARE ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR INSTALLING PRODUCT LINK PL542 OR PL240B CELLULAR RADIO SYSTEMS OR UPDATING SOFTWARE ON CERTAIN CATERPILLAR PRODUCTS

Service Letter-Australia

Service Letter-CFEL

Service Letter-CSARL

Service Letter-Americas

Tool Operating Manual

Using The Inspection Borescopes 1U5268 and 8T9290 Borescopes
Using The Inspection Borescopes 1U5268 and 8T9290 Borescopes

Instructions for 1U9801 Ultrasonic Wear Indicator Program Module Replacement{0767}
Instructions for 1U9801 Ultrasonic Wear Indicator Program Module Replacement{0767}

9U7990 Counter Bore Tool Group for 3176, 3300 and 3400 Series Engines{1201}
9U7990 Counter Bore Tool Group for 3176, 3300 and 3400 Series Engines{1201}

Using the Caterpillar Fuel Flow Monitor System{0782, 1000, 1250}
Using the Caterpillar Fuel Flow Monitor System{0782, 1000, 1250}

Service Letter-China

PRODUCT SUPPORT PROGRAM FOR INSTALLING PRODUCT LINK PL542 OR PL240B CELLULAR RADIO SYSTEMS OR UPDATING SOFTWARE ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR INSTALLING PRODUCT LINK PL542 OR PL240B CELLULAR RADIO SYSTEMS OR UPDATING SOFTWARE ON CERTAIN CATERPILLAR PRODUCTS

Service Letter-Asia

Reuse And Salvage Guidelines

Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}

Service Letter-APD

PRODUCT SUPPORT PROGRAM FOR INSTALLING PRODUCT LINK PL542 OR PL240B CELLULAR RADIO SYSTEMS OR UPDATING SOFTWARE ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR INSTALLING PRODUCT LINK PL542 OR PL240B CELLULAR RADIO SYSTEMS OR UPDATING SOFTWARE ON CERTAIN CATERPILLAR PRODUCTS

Testing and Adjusting

Manifold Gauge Set (Refrigerant) - Install
Air Conditioning and Heating R-12 All Caterpillar Machines

Manifold Gauge Set (Refrigerant) - Remove
Air Conditioning and Heating R-12 All Caterpillar Machines

Required Tools
Air Conditioning and Heating R-12 All Caterpillar Machines

Bench Test Procedures

Required Tooling for Bench Testing Hydraulic Components {0784, 4000, 4005, 4129, 4250, 4300, 5050}
Required Tooling for Bench Testing Hydraulic Components {0784, 4000, 4005, 4129, 4250, 4300, 5050}

Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}

Service Magazine

6V2050 Tapered Rod Tool Group Available For Removal And Installation Of Bearings{1219,1218,1214}
1980/06/09

Use The 6V2056 Rod And 6V2057 Point To Find True Top Center{0653}
1980/07/14

6V3071 Seal Guide Keeps Seal In Position During Installation Of Transfer Pump {0620,1256}
1980/09/22

Modification Of Puller Bolt Prevents Thread Damage During Removal Of Sleeve From Sleeve Metering Fuel System{0621,1251,1253}
1980/11/03

6V3129 Nozzle Puller Group And FT1533 Nozzle Assembly Adapter Can Be Used To Remove Fuel Nozzles{0621,1254}
1981/02/02

6V4163 Bit And 6V4164 Driver Now Available For Removal Of Bolts For Flyweight Carrier{0612,1264}
1981/02/23

Use Two Wrenches On Fuel Line Nuts{1254,1252}
1981/04/13

FT1585 Plate Can Be Fabricated For Governor Spring Guide Replacement{0626}
1981/04/13

Use 6V4089 Reamer Assembly To Clean Nozzle Bores{0622}
1981/04/27

Remove Direct Injection Fuel Nozzles With 6V4061 And 6V4054 Nozzle Pullers{0621}
1981/05/18

Improvements To Optional Modification Of 5P4150 Nozzle Tester{0651,1254}
1981/08/17

FT1632 Bolt Used During Removal Of Sleeve From Sleeve Metering Fuel System{0621,1251,1253}
1981/08/31

Piston And Connecting Rod Assembly Storage Cabinet{0600}
1982/01/18

New 6V4095 And 6V4096 Tool Groups Available For Scroll Fuel Systems{0611,0654}
1982/01/25

New Engine Testing And Adjusting Tools Give More Accuracy And Longer Service Life{0651}
1982/02/01

New 6V4818 Driver Available To Install Rack Bearings In Fuel Injection Pump Housings{0622}
1982/02/08

Use 6V6035 Hardness Tester On Crankshafts{0651,1202}
1982/02/22

Use New Special Instruction To Install 5P6595 Insert In Cylinder Liner Seats{1216,0621}
1982/05/03

Separate Valve Stem Gauges Available{0653,1000}
1982/06/07

New Address For Repair Of Diagnostic Tools{0650}
1982/06/14

6V6124 Calibration Coil Available To Calibrate And Check 6V4910 AC/DC Clamp-On Ammeter{0651}
1982/06/28

Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator{0651}
1982/08/16

Vacuum Tester Checks For Leaks Between Valve Face and Seat{0651,1103,1105}
1982/09/06

Dial Bore Gauge And Size Setting Fixture Available{0653}
1982/09/20

Service Information For Easier Use Of The 6V3100 Timing Indicator Group{0651,1250,1156,1157}
1982/10/11

6V6142 And 6V6143 Installers Can Be Used To Install Crankshaft Seals And Wear Sleeves{0622,0626,1160,1161}
1982/11/01

Use 6V6147 Polishing Wheel To Clean Piston Pins{0675,1214}
1982/11/08

6V6175 And 6V6176 Torque Adapters Make Installation Of Fuel Pump Drive Gear Easier{1206,1272,0614}
1982/11/08

Make Change To 6V2100 Multitach And 5P9698 Calibrator{0651}
1982/11/15

Service Parts Available For The 5P4150 Nozzle Testing Group{0651,0652}
1982/11/22

New 6V7059 Micrometer Measures Liner Top Flange And Valve Lip {0653,1216,1105}
1982/11/29

Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks{0622,0675,1201,1202}
1983/05/16

6V4163 Bit And 6V4164 Driver Now Available For Removal Of Bolts For Flyweight Carrier{0612,1264}
1983/12/05

Correct Use Of The 6V4141 Sleeve Metering Calibration Tool Group{0600,0766,0778}
1984/10/01

Use Caterpillar 6V50 Engine Timing Indicator For Accurate Readings{0782,0785,0775}
1985/05/27

Check 5P7435 Tee Adapter Groups In The 6V3100 Engine Timing Indicator Groups{0782}
1985/06/03

Two, New Top Dead Center Magnetic Transducers Available{0651,0653,1214,1250}
1985/10/07

Fuel Sulfur Analyzer Available{0651,1280,1318}
1986/01/13

Update Information For Caterpillar Fuel Injection Equipment Test Stand{0782}
1986/06/16

New Engine Timing Indicator Group Available {0781,0782}
1986/07/07

New Indicator Instrument Group Available To Measure Crankcase Blowby And Radiator Air Velocity{0781,1200,1350}
1986/10/27

Use Gas Detector Tubes That Have Expired Dates To "Break In" The Combustion Chambers For The Fuel Sulphur Analyzer Group{0651}
1986/11/10

Check For Dirt Before Replacing Pyrometer Switch{1050,7466}
1986/12/15

New Special Instruction For Troubleshooting 5P2150 Engine Horsepower Meter{0651,1250}
1977/01/17

New Tie Bars Improve Stability Of The Fuel Injection Test Bench{0652}
1977/01/17

New 5P7307 Engine Turning Tool Group Fits All Engines{0611}
1977/02/14

Tools To Remove Wear Sleeves From Crankshafts{0621,7558}
1977/04/18

Tools To Install Crankshaft Seal And Wear Sleeve{1160,1161,0622}
1977/07/11

Tools Now Available To Ream And/Or Hone 0.500" (12.70 mm) Diameter Valve Guides{0663}
1977/08/22

Seal Driver Assemblies For Installation Of Equalizer Bar Seals Now Available Through Parts Department{0620,7206}
1977/08/29

Use Correct Contact Point With Dial Indicator To Be Sure Of The Accuracy Of The Measurements Of Fuel Setting And Fuel Ratio Control Setting On Sleeve Metering Fuel Systems{0653,1250}
1977/09/26

Troubleshooting The Tachometer System Of The 4S6553 Engine Instrument Group{0651}
1977/10/10

Fabricated Extension Prevents Fuel "Splash" During Injection Valve Testing{0650,1254}
1977/10/17

Assembly Procedure For The 5P4721 Tube (Part Of The 5P4149 Conversion Group And 5P4150 Nozzle Testing Group){0650}
1977/10/24

With New 5P7448 Adapter, Earlier Fuel Injection Valves And Nozzles Can Be Tested And Adjusted On The 5P4150 Nozzle Testing Group{0651,1254}
1977/10/31

New 8T5261 Bushing Installer And Remover Adapter Tool Available{0600}
1987/03/02

Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups{0781}
1987/03/16

5P957 And 5P3514 Coolant And Battery Tester{0786,1395,1401}
1987/03/23

Black Light Leak Detection Kit Available For Oil, Fuel and Cooling Systems {0774,1250,1300,1350}
1987/05/11

The Caterpillar Fuel Flow Monitor System Available {0782,1000,1250}
1987/05/11

Two New Self-Powered Digital Tachometers And Signal Generator Available {7462}
1987/05/11

Additional Guidelines For Using The 8T2700 Blowby/Air Flow Indicator Group {0781,1200,1350}
1987/07/20

5P8665 Cylinder Liner Puller Makes Liner Removal Easier And Faster{0621,1216}
1978/01/09

Probable Causes Of Low Fuel Delivery During Testing On Fuel Injection Test Benches{0650,1250}
1978/02/06

Replacement Seal Group For Water Pump Impeller Now Has All The Seal Parts Plus An Installation Tool{1361,0622}
1978/02/13

5P4149 Conversion Group To Become A Discontinued Item On October 1, 1978{0650,1254}
1978/03/27

Locating Bushings For The 5P3550 Rod Boring Machine Will Now Hold Tapered Piston Pin Bushings {0626}
1978/04/17

Use 6V100 Tool Arrangement To Remove And Install Piston Pin Bearings For Both Tapered And Standard Connecting Rods{0620,1218}
1978/04/24

Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24

New 5P8744 Adapter Assembly And Special Instruction Procedures For 5P4150 Nozzle Tester Group{0650}
1978/08/28

New Drive Adapters For Fuel Injection Test Bench{0650}
1978/09/11

Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25

Adjustment Procedures And Lubrication Recommendations For Drive Pulleys On Caterpillar Fuel Injection Test Bench{0652}
1978/09/25

4J7533 O-Ring Seals Now Available For Parts Service Of The 5P4150 Nozzle Tester Group{0651}
1978/10/09

Caterpillar Fuel Injection Test Bench Book{0374}
1978/10/16

Modification To Rack Adjusting Tool Needed For Higher Rack Settings{0654,1257}
1978/10/16

New FT2253 Cable Assembly Drawing Available For Kent-Moore Fuel Injection Test Bench{0782}
1988/01/04

Extraction Tools For "Live Oil Sampling"{7770,0770,0781,0783,0784}
1988/04/18

Some Components Of The Variable Pulley And Adjustable Pulley On The Kent-Moore Fuel Injection Test Bench Are Available From Caterpillar{0782}
1988/04/18

New 1U9139 Universal Fuel Line Pickup Available{0775}
1988/05/23

Installation Of Valves For Live Oil Sampling{7770,0770,0781,0783,0784}
1988/06/06

Revised Instructions For Installation of New Maintenance Free Batteries{1401,1400}
1988/12/12

New 6V87 Gauge Measures Valve Stem Wear{0653,1105}
1979/01/08

Current Chart For Dynamometer Adapters{0651,1000}
1979/01/22

2P8316 Dowel Now Available For Parts Service{0652}
1979/04/30

9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28

6V183 Gasket Now Available For Parts Service To Use On 5P4150 Or 8S2242 Nozzle Tester{0651}
1979/06/25

Fuel Injection Line For Injection Test Bench Is Available From Caterpillar{0652,1250}
1979/07/02

Caution Label Added To 5P4150 Nozzle Testing Group{0651}
1979/07/09

Changes Made To 8S2243 And 8S4613 Wrenches Used On Fuel Injection Pumps{0612,1251}
1979/08/06

Splash Shields Added To Caterpillar Fuel Injection Test Bench{0652}
1979/08/13

Quick Disconnect Coupling On Optional Modification Of 5P4150 Nozzle Tester Permits Faster Exchange Of Adapters{0651,1254}
1979/09/03

Tee Handle Hexagonal Wrench In Rack Adjusting Tool Is Now Available For Parts Replacement
1979/09/10

Fast Fuel Delivery Couplings And Fast Oil Change Couplings Are Available For All Caterpillar Equipment{0671,1273,1279,1325}
1979/10/08

Use The 6V2034 Micrometer Adapter To Measure Lip Thickness Of Engine Valves {0653,1105}
1979/10/29

Cylinder Pack Puller Groups Improved {0705,1239}
1993/01/18

New Hydraulic Wrenches and Pumps {0602, 0615}
2000/06/01

Diagnostic Cables and Harnesses Are Available {0785}
2000/12/25

Caterpillar Electronic Technician (Cat ET) 2001B-Service Pack 1 Software Upgrade is Now Available {0785}
2002/02/11

New Hydraulic Hose Assembly Machine Integrates Crimputer II with Radial Crimping Technology {0738}
2004/05/03

USB Cable Connects PC with USB Ports to Communication Adapter or to DataView Tool Group {0785, 0788}
2004/03/15

Single Element and Multiple Element Filter Heads are Available for Customized Systems {0738}
2004/03/29

Caterpillar Idler Welder Handles Track Idlers, Track Rollers and Railroad Rims {0679}
2004/05/24

Cat Service Tools Releases New Hose Cutting Machine {0678, 0684}
2004/03/29

Hose Kit Helps the Technician Properly Prepare Hydraulic Hose for Assembly {0684}
2004/05/31

New Pry Bars Have Striking Caps on Handles {0607}
2004/04/01

Twist Impact Sockets Grip Fasteners as Torque is Applied {0601}
2004/04/01

D7G TRACTOR / POWERSHIFT / 92V00001-02126 (MACHINE) SERVICE EQUIPMENT AND SUPPLIES Caterpillar SIS

Parts group D7G:

Information:

Truck sale: