AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

1J223 BLADE GROUP--Angling Part of 9J3348 Bulldozer Arrangement listed on Page 4 9A BULLDOZER


WORK TOOLS
BLADE GP
IMPLEMENTS
PUSH ARM GP
HYDRAULIC SYSTEM
CYLINDER GP
IMPLEMENTS
BULLDOZER GP

BULLDOZER 9A BULLDOZER 11E
 9A, 9C, 9S & 9U BULLDOZERS 11E01599-UP SEBP1015 9A 11E   (1978)

WORK TOOLS

BLADE GP
BLADE GROUP
1J-0223 BLADE GROUP
BLADE GROUP
6J-0778 BLADE GROUP
BLADE GP
6J-5946 BLADE GP
BLADE GROUP
8J-2115 BLADE GROUP
BLADE GROUP
7J-0909 BLADE GROUP
 

#SEBP10150020
 

1J-0223: BLADE GROUP

1J223 BLADE GROUP--Angling
Part of 9J3348 Bulldozer Arrangement listed on Page 4
c158903 SEBP1015
1J0223 BLADE GROUP Parts scheme
  For full view, you need register

Parts for your 9A BULLDOZER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  4J-3318 [4] BRACKET  
    (PART OF BLADE ASSEM. 3H5529)
  1J-2350 [1] PLATE ASSEM. (L.H.)  
    (Part of Blade Assem. 3H5529)
  7J-6712 [1] END BIT  
    (L.H. - Hot Cupped)
  5J-6804 [2] CUTTING EDGE  
  5J-6805 [1] CUTTING EDGE  
  H [1] KIT (CUTTING EDGE AND END BIT)  
    (CONSISTS OF END BITS, CUTTING EDGES AND HARDWARE)
  3H-5529 [1] BLADE ASSEM.  
  3H-7161 [1] PIN  
  3H-5540 [1] BRACKET  
    (PART OF 3H5529 ASSEM.)
  9F-4684 [1] PIN  
  3B-4617 [1] COTTER PIN  
  1J-0803 [1] PLATE (RH)  
  1J-0804 [1] PLATE (LH)  
    (PARTS OF BLADE ASSEM. 3H5529)
  8J-2928 C [33] BOLT (375" LONG)  
  1J-4947 [6] BOLT (5.25" LONG)  
  2J-3507 [14] NUT  
    (USED WITH END BIT)
  7J-6711 [1] END BIT  
    (R.H. - Hot Cupped)
  3K-5234 C [39] WASHER  
  2J-3507 [25] NUT  
  C   INDICATES CHANGE
  H   NOT PART OF 1J223 BLADE GROUP
 

#SEBP10150021
 

6J-0778: BLADE GROUP

6J778 BLADE GROUP--Straight
Part of 9J3350 Bulldozer Arrangement listed on Page 4
Note: 6J9248 Push Plate is available
c158904 SEBP1015
6J0778 BLADE GROUP Parts scheme
  For full view, you need register

Parts for your 9A BULLDOZER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  6J-9249 H [ 4] PLATE  
    (To Provide Patch Plates)
  1J-7615 H [ 1] PLATE (Serial No.)  
  4B-4159 H [ 2] DRIVE SCREW  
1. 8J-8193 C [ 1] BRACKET  
2. 6J-5169 C [ 1] RETAINER  
3. 8J-8981 C [ 2] DEFLECTOR ASSEM.  
4. 8J-8242 C [ 1] MOLDBOARD ASSEM.  
  6J-2079 [ 1] MOLDBOARD (Center)  
  6J-2081 [ 1] MOLDBOARD (R.H.)  
  6J-2082 [ 1] MOLDBOARD (L.H.)  
5. 8J-8953 [ 1] PLATE ASSEM. (R.H.)  
6. 8J-8956 [ 1] END BIT  
7. 8J-8951 [ 1] SHOE ASSEM.  
8. 8J-8954 [ 1] PLATE ASSEM. (L.H.)  
9. 8J-8956 [ 1] END BIT  
10. 8J-8952 [ 1] SHOE ASSEM.  
11. 8J-8957 [ 2] REINFORCEMENT  
12. 4J-1375 [ 2] GUSSET  
13. 8J-1119 [ 14] GUSSET  
14. 6J-7563 [ 2] PIN  
15. 2H-3757 [ 6] BOLT  
  3B-4514 [ 6] LOCKWASHER  
16. 6J-7500 [ 2] RETAINER  
17. 5J-0121 [ 2] CONNECTOR  
18. 7J-6713 [ 1] END BIT (R.H.-Hot Cupped)  
  7J-6714 [ 1] END BIT (L.H.-Hot Cupped)  
19. 6J-0773 [ 2] BRACKET  
20. 6J-6603 [ 2] RETAINER  
21. 6J-6604 [ 2] PIN  
22. 2J-3507 [ 35] NUT  
  3K-5234 [ 35] WASHER  
23. 6J-2084 [ 3] CUTTING EDGE  
24. 4J-9208 [ 35] BOLT  
25. 8J-3409 [ 1] BRACKET ASSEM. (L.H.)  
26. 8J-3072 [ 1] CAP  
27. 8J-3408 [ 1] BRACKET ASSEM. (R.H.)  
28. 8J-3072 [ 1] CAP  
29. 8J-2979 [ 20] SHIM  
30. 8J-8191 [ 2] BRACKET ASSEM. (R.H.)  
31. 8J-8190 [ 2] BRACKET ASSEM. (L.H.)  
32. 3B-8489 [ 2] FITTING  
    NOT PART OF 6J778 BLADE GROU
    INDICATES CHANGE
 

#SEBP10150022
 

6J-5946: BLADE GP

6J5946 BLADE GROUP--Universal
Part of 9J3352 Bulldozer Arrangement listed on Page 5
c158905 SEBP1015
6J5946 BLADE GP Parts scheme
  For full view, you need register

Parts for your 9A BULLDOZER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8J-3409 [1] BRACKET ASSEM. (L.H.)  
  8J-3072 [1] CAP  
2. 8J-3408 [1] BRACKET ASSEM. (R.H.)  
  8J-3072 [1] CAP  
3. 8J-9083 [1] MOLDBOARD ASSEM.  
  6J-6139 [2] GUSSET  
4. 8J-1119 [17] GUSSET  
5. 4J-1375 [4] GUSSET  
6. 8J-8975 [2] REINFORCEMENT (end)  
7. 8J-9047 [1] PLATE ASSEM. (L.H.)  
8. 8J-8969 [1] SHOE ASSEM. (L.H.)  
9. 8J-9048 [1] BIT  
10. 8J-9046 [1] PLATE ASSEM. (R.H.)  
  8J-8968 [1] SHOE ASSEM. (R.H.)  
  8J-9048 [1] BIT  
11. 2J-3507 [40] NUT  
  3K-5234 [40] WASHER  
12. 6J-6144 [2] EDGE .59 cm(23.25 in.) long  
13. 8J-8190 [2] BRACKET ASSEM. (L.H.)  
14. 4J-9208 [14] BOLT  
15. 6J-5945 [3] EDGE .9 m(35.5 in.) long  
16. 6J-0773 [2] BRACKET  
17. 7J-6712 [1] END BIT (L.H. - Hot Cupped)  
  7J-6711 [1] END BIT (R.H. - Hot Cupped)  
18. 5J-0121 [2] CONNECTOR  
19. 6J-7500 [2] RETAINER  
20. 2H-3757 [6] BOLT  
  3B-4514 [6] LOCKWASHER  
21. 6J-7563 [2] PIN  
22. 3B-8489 [2] FITTING  
23. 4J-9058 [26] BOLT  
24. 6J-6604 [2] PIN  
25. 6J-6603 [2] RETAINER  
26. 8J-8981 [2] DEFLECTOR ASSEM.  
27. 8J-2979 [20] SHIM  
28. 6J-5169 [1] RETAINER  
29. 8J-8193 [1] BRACKET  
30. 8J-8191 [2] BRACKET ASSEM. (R.H.)  
31. 1J-7699 H [1] PLATE (Serial No.)  
  4B-4159 H [2] SCREW  
  6J-9269 H [4] PLATE  
    (To provide Patch Plates)
  H   NOT PART OF 6J5946 BLADE GROUP
 

#SEBP10150023
 

8J-2115: BLADE GROUP

8J2115 BLADE GROUP--Universal
Part of 8J3388 Bulldozer Arrangement listed on Page 5
c158902 SEBP1015
8J2115 BLADE GROUP Parts scheme
  For full view, you need register

Parts for your 9A BULLDOZER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7J-4655 [1] PIN  
  5J-8979 [1] WASHER  
  7J-4869 [1] RETAINER  
2. 0S-1566 [4] BOLT  
  3B-4510 [4] LOCKWASHER  
3. 8J-8975 C [2] REINFORCEMENT  
4. 7J-6711 [1] END BIT (R.H. Hot Cupped)  
  7J-6712 [1] END BIT (L.H. Hot Cupped)  
5. 6J-6139 C [2] GUSSET  
6. 4J-9208 [14] BOLT  
7. 2J-3507 [58] NUT  
  3K-5234 [58] WASHER  
8. 6J-5945 [4] CUTTING EDGE  
9. 3B-8489 [2] FITTING  
10. 6J-6144 [2] CUTTING EDGE  
11. 8J-3447 [1] SOCKET ASSEM.  
12. 5F-8576 [2] LINER  
13. 8J-2126 [3] CUTTING EDGE  
14. 4J-9058 [44] BOLT  
15. 4J-1375 C [4] GUSSET  
16. 8J-1119 C [35] GUSSET  
17. 8J-9046 C [1] PLATE ASSEM. (R.H.)  
    (Includes)
18. 8J-9048 [1] ROUTER BIT  
19. 8J-8968 [1] SHOE ASSEM.  
20. 8J-9047 C [1] PLATE ASSEM. (L.H.)  
    (Includes)
21. 8J-9048 [1] ROUTER BIT  
22. 8J-8969 [1] SHOE ASSEM.  
  C   INDICATES CHANGE
 

#SEBP10150024
 

7J-0909: BLADE GROUP

7J909 BLADE GROUP--Cushion
Part of 9J2233 Bulldozer Arrangement listed on Page 6
c158901 SEBP1015
7J0909 BLADE GROUP Parts scheme
  For full view, you need register

Parts for your 9A BULLDOZER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  3J-1225 [2] BRACKET  
  6J-1792 [2] PIVOT ASSEM.  
  3J-6525 [2] BEARING  
    (1 IN EACH PIVOT ASSEM. 6J1792)
  5J-6836 [1] CUTTING EDGE  
  4J-3868 [1] PLATE  
  5J-6503 [1] PLATE  
  4J-9208 [29] BOLT  
  2J-3507 [29] NUT  
  4J-8723 [1] END BIT (R.H. Forged)  
  4J-8724 [1] END BIT (L.H. Forged)  
  2J-9415 [2] PLATE  
 

#SEBP10150025
 

3J-5352: ARM AND BRACE GROUP

3J5352 ARM AND BRACE GROUP
Part of 9J3348 Bulldozer Arrangement listed on Page 4
c133269 SEBP1015
3J5352 ARM AND BRACE GROUP Parts scheme
  For full view, you need register

Parts for your 9A BULLDOZER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  2J-7147 [2] BRACE ASSEM.  
  1J-7613 [2] NUT  
    (1 IN EACH BRACE ASSEM. 2J7147)
  3B-8489 [4] FITTING  
  1J-7611 [2] SCREW  
  1J-6746 [2] PIN (7.26"LONG)  
  5F-7994 [2] PIN (3.375"LONG)  
  3B-4627 [2] COTTER PIN  
  6J-1464 [2] BEARING ASSEM.  
    (1 IN EACH ARM ASSEM. 6J1465 AND 6J1466)
  6J-1462 [1] CONNECTOR  
  6J-1463 [1] CAP  
  3J-5266 [2] BALL STUD  
  3J-6588 [2] PIN  
  3J-1770 [4] PIN (LOCK)  
  6J-1463 [2] CAP  
  2B-1015 [8] BOLT  
  3B-4512 [8] LOCKWASHER  
  6J-1465 [1] ARM ASSEM. (R.H.)  
  6J-1466 [1] ARM ASSEM. (L.H.)  
  0S-1600 [4] BOLT  
  1B-4206 [4] NUT  
  3B-4510 [4] LOCKWASHER  
  1B-4158 [2] NUT  
  3B-5329 [2] COTTER PIN  
  3H-5528 [2] PIN ASSEM.  
  3J-0970 [2] BEARING ASSEM.  
    (1 IN EACH BRACE ASSEM. 2J7147)
  3J-5345 [4] PIN ASSEM.  
  4F-9668 [4] PIN  
    (2 IN EACH TUBE ASSEM. 5J2458)
  3B-4617 [4] COTTER PIN  
  1F-7960 [4] WASHER  
  5J-2458 [2] TUBE ASSEM.  
  3J-5342 [8] PLATE  
    (4 IN EACH TUBE ASSEM. 5J2458)
  3J-6497 [2] SCREW  
  3J-5349 [2] NUT  
    (1 IN EACH ARM ASSEM. 6J1465 AND 6J1466)
 

#SEBP10150026
 

6J-8792: PUSH ARM & BRACE GP

6J8792 PUSH ARM AND BRACE GROUP
Part of 9J3350 and 9J3352 Bulldozer Arrangements listed on Pages 4 and 5
6J1570 Cylinder parts are shown on Page 16
c150833 SEBP1015
6J8792 PUSH ARM & BRACE GP Parts scheme
  For full view, you need register

Parts for your 9A BULLDOZER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6J-7370 [ 1] PUSH ARM GROUP (L.H.)  
  6J-7368 [ 1] PUSH ARM ASSEM.  
2. 6J-7371 [ 1] BRACKET  
3. 5J-4798 [ 1] BEARING ASSEM.  
4. 2J-3507 [ 4] NUT  
5. 1D-4647 [ 4] BOLT  
6. 5J-4493 [ 1] CAP  
7. 2H-3757 [ 12] BOLT  
  3B-4514 [ 12] LOCKWASHER  
8. 6J-7563 [ 2] PIN  
9. 6J-7501 [ 2] RETAINER  
10. 6J-2678 [ 1] STRUT ASSEM. (L.H.)  
    (Includes)
  9J-3791 C [ 1] BEARING ASSEM.  
11. 3B-4627 [ 2] COTTER PIN  
12. 5F-7993 [ 6] PIN  
13. 3B-5326 [ 8] COTTER PIN  
14. 5J-8554 [ 2] BRACE ASSEM.  
15. 6J-2474 [ 2] LINK  
16. 3F-6185 [ 2] PIN 5.44 in.(13.82 cm)long  
  4F-0255 [ 2] PIN 2.88 in.(7.32 cm) long  
17. 9H-1031 [ 12] WASHER  
18. 6J-1570 Y [ 1] CYLINDER GROUP (L.H. or R.H.)  
19. 6J-2326 [ 2] PIN  
20. 5J-8207 [ 1] RETAINER  
21. 8J-7978 [ 1] BEARING  
22. 1J-6749 [ 2] SCREW  
23. 6J-2846 [ 1] SCREW  
24. 8J-2913 [ 1] STRUT ASSEM. (R.H.)  
    (Includes)
  9J-3791 C [ 1] BEARING ASSEM.  
25. 6J-1536 [ 12] BOLT  
26. 6J-2440 [ 1] BRACE ASSEM. (R.H. or L.H.)  
27. 6J-0775 [ 1] BALLSTUD  
28. 7J-5621 [ 1] CAP  
29. 1J-7474 [ 1] HANDLE ASSEM.  
  1J-6798 [ 1] KNOB  
  8J-4867 [ 1] LUG  
30. 3B-8489 [ 1] FITTING  
31. 6J-8791 [ 1] PUSH ARM GROUP (R.H.)  
  6J-8789 [ 1] PUSH ARM ASSEM.  
32. 6J-7371 [ 1] BRACKET  
33. 6J-8805 [ 1] BEARING ASSEM.  
34. 8S-4954 [ 1] PLATE  
35. 0T-0690 [ 6] BOLT  
  3B-4514 [ 6] LOCKWASHER  
36. 8S-4956 [ 1] PLATE  
37. 5J-4493 [ 1] CAP  
38. 1D-4647 [ 4] BOLT  
39. 2J-3507 [ 4] NUT  
    Separate Illustration
    INDICATES CHANGE
 

#SEBP10150027
 

6J-1570: CYLINDER GP

6J1570 TILT CYLINDER GROUP (Change 5)--209.6 mm (8.25 in.) Bore x 177.8 mm (7 in.) Stroke--Type 1
Part of 6J8792 Push Arm and Brace Group shown on Page 15
c143305 SEBP1015
6J1570 CYLINDER GP Parts scheme
  For full view, you need register

Parts for your 9A BULLDOZER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6J-1555 [ 1] CYLINDER ASSEM.  
2. 6J-2225 [ 1] BEARING  
    (Part of 6J1555 Cylinder Assem.)
3. 4J-6888 [ 1] NUT  
4. 4J-7376 [ 1] RING  
5. 5J-5559 [ 1] SEAL ASSEM.  
6. 6J-1553 [ 1] PISTON  
7. 1J-2176 [ 1] SEAL  
8. 2J-0744 [ 1] RING  
9. 5M-0544 [ 6] BOLT  
  3B-4518 [ 6] LOCKWASHER  
10. 5J-8350 [ 1] SEAL  
11. 4J-8981 [ 1] SEAL  
12. 7J-5621 [ 1] CAP  
13. 6J-1558 [ 1] ROD  
14. 6J-6736 [ 1] SEAL  
15. 6J-7890 [ 1] HEAD  
 

#SEBP10150028
 

6J-1570: CYLINDER GP

6J1570 TILT CYLINDER GROUP (Change 7)--209.6 mm (8.25 in.) Bore x 177.8 mm (7 in.) Stroke--Type 2
Part of 6J8792 Push Arm and Brace Group shown on Page 15
c182136 SEBP1015
6J1570 CYLINDER GP Parts scheme
  For full view, you need register

Parts for your 9A BULLDOZER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6J-1555 R [1] CYLINDER ASSEM.  
    (Includes)
2. 6J-2225 [1] BEARING  
3. 4J-6888 [1] NUT  
4. 4J-7376 [1] RING  
5. 5J-5559 [1] SEAL ASSEM.  
6. 6J-1553 [1] PISTON  
7. 8J-4386 C [1] SEAL  
8. 3G-3747 C [1] RING  
9. 5M-0544 [6] BOLT  
  3S-1349 C [6] WASHER  
10. 5J-8350 [1] SEAL  
11. 4J-8981 [1] SEAL  
12. 7J-5621 [1] CAP  
13. 6J-1558 R [1] ROD  
14. 6J-6736 [1] SEAL  
15. 1U-3248 C [1] HEAD  
  C   INDICATES CHANGE
  R   REMFG PART MAY BE AVAILABLE
 

#SEBP10150029
 

7J-4438: TILT BRACE GROUP

7J4438 TILT BRACE GROUP
Part of 8J3388 Bulldozer Arrangement listed on Page 5
c135385 SEBP1015
7J4438 TILT BRACE GROUP Parts scheme
  For full view, you need register

Parts for your 9A BULLDOZER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. [2] BEARING  
2. [8] BOLT  
  [8] NUT  
3. [2] BRACE ASSEM.  
4. [1] BEARING  
5. [1] SINGLE TREE ASSEM.  
6. [2] TRUNNION  
7. [2] BEARING  
8. [2] SCREW ASSEM.  
9. [1] BEARING  
 

Information:

Special Instruction
Spherical Bearings for Bulldozers and Rippers{7551, 6050, 6313}
Spherical Bearings for Bulldozers and Rippers{7551, 6050, 6313}
Service Magazine
Special Instruction SEHS9429-01 Available for Spherical Bearings for Bulldozers and Rippers{7551,6050,6313}
1995/01/16

Caterpillar Parts SIS Catalog 9A :

END BITS
END BITS
REPLACEMENT CUTTING EDGES AND END BITS
REPLACEMENT CUTTING EDGES AND END BITS
RADIATOR GUARD ASSEMBLY
7G-4626 RADIATOR GUARD ASSEMBLY
3G-6352 BULLDOZER ARRANGEMENT
REPLACEMENT CUTTING EDGES AND END BITS
9J-2233 BULLDOZER AR
BLADE GROUP
6J-0778 BLADE GROUP
BLADE GP
6J-5946 BLADE GP
BLADE GROUP
8J-2115 BLADE GROUP
BLADE GROUP
7J-0909 BLADE GROUP
ARM AND BRACE GROUP
3J-5352 ARM AND BRACE GROUP
PUSH ARM & BRACE GP
6J-8792 PUSH ARM & BRACE GP
CYLINDER GP
6J-1570 CYLINDER GP
CYLINDER GP
6J-1570 CYLINDER GP

Truck sale:

Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.