POWER TRAIN
DRIVE GP-FINALSPROCKET GP
STEERING AND BRAKING SYSTEM
CLUTCH & BRAKE GP-STEERINGCLUTCH GP-STEERING
WORK TOOLS
WINCH GPSTEERING AND BRAKING SYSTEM
BRAKE GPPOWER TRAIN
DRIVE GP-FINAL#SEBP10210090
3S-3467: FINAL DRIVE GP
3S3467 FINAL DRIVE GROUP--Upper Half-Part 1 of 2
Serial No. 40U405-Up
8P398 Segmented Sprocket parts are shown on Page 64
Serial No. 40U405-Up
8P398 Segmented Sprocket parts are shown on Page 64
Parts for your 572G PIPELAYER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 1B-4206 | [2] | NUT | |
| 2. | 3B-4510 | [2] | LOCKWASHER | |
| 3. | 5S-4863 | [2] | HOLDER ASSEM. | |
| 4. | 9M-4007 | [2] | DOWEL | |
| 5. | 1F-1006 | [1] | DOWEL | |
| 6. | 5M-5036 | [2] | SEAL | |
| 7. | 2A-2814 | [2] | BOLT | |
| 8. | 5M-5033 | [2] | CAGE | |
| 9. | 8S-2506 | [2] | LOCK | |
| 10. | 6P-7639 C | [2] | GASKET | |
| 11. | 8P-0187 | [2] | NUT | |
| 12. | 7B-0357 | [2] | CUP | |
| 13. | 5F-1248 | [2] | CONE | |
| 14. | 2S-7063 | [2] | NUT | |
| 15. | 8P-1252 RC | [4] | SEAL GROUP | |
| 16. | 1M-9011 | [2] | RING | |
| 17. | 9S-2172 | [4] | GUARD | |
| 18. | 2S-7066 | [2] | LOCK | |
| 19. | 3B-4506 | [60] | LOCKWASHER | |
| 20. | 0L-1351 | [40] | BOLT | |
| 21. | 8P-0398 Y | [2] | SPROCKET GROUP | |
| (Separate Illustration) | ||||
| 22. | 7H-3171 | [2] | PLUG | |
| 25. | 5H-3262 | [2] | DOWEL | |
| 26. | 0L-1026 | [4] | PLUG | |
| 27. | 1M-5156 | [2] | DOWEL | |
| 28. | 2B-7557 | [6] | CORK | |
| 29. | 2B-2994 | [6] | DOWEL | |
| 30. | 3P-2872 | [1] | CASE (L.H.) | |
| 3P-2871 | [1] | CASE (R.H.) | ||
| 7M-7260 | LIQUID GASKET | |||
| 31. | 1A-1135 | [62] | BOLT | |
| 32. | 4D-3704 | [62] | WASHER | |
| 33. | 2K-0744 | [2] | PLUG | |
| 34. | 1S-5347 | [2] | SEAL | |
| 35. | 1P-7590 | [2] | SUPPORT ASSEM. | |
| 36. | 2P-0895 | [1] | KIT (bearing service) | |
| (Includes Bearing & 2P896 Sealant Kit) | ||||
| 37. | 2S-7069 | [8] | SHIM | |
| 38. | 2S-7596 | [2] | RETAINER | |
| 39. | 2S-7594 | [2] | LOCK | |
| 40. | 5M-5017 | [2] | NUT | |
| 41. | 8M-9441 | [2] | GASKET | |
| 42. | 2S-7064 | [2] | CAP | |
| 43. | 9F-2247 | [2] | PLUG | |
| 44. | 3B-4508 | [12] | LOCKWASHER | |
| 45. | 0S-1585 | [12] | BOLT | |
| 46. | 3B-8489 | [2] | FITTING | |
| 47. | 0S-1588 | [20] | BOLT | |
| 48. | 3S-3473 | [2] | EXTENSION | |
| R | REMFG PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
| C | INDICATES CHANGE | |||
#SEBP10210091
3S-3467: FINAL DRIVE GP
3S3467 FINAL DRIVE GROUP--Lower Half-Part 2 of 2
Serial No. 40U405-Up
Serial No. 40U405-Up
Parts for your 572G PIPELAYER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3S-9669 | [4] | RACE AND ROLLER ASSEM. | |
| 2. | 9S-4829 | [4] | RACE | |
| 3. | 1M-8776 | [4] | RACE AND ROLLER ASSEM. | |
| 4. | 2P-2811 | [4] | RACE | |
| 5. | 9S-6874 | [2] | GEAR AND PINION (47 & 12 Teeth) | |
| 6. | 9S-6875 | [2] | PINION (12 Teeth) | |
| 7. | 7B-3235 | [16] | BOLT | |
| 8. | 5M-6646 | [4] | LOCK (3.625" Center to Center) | |
| 5M-6647 | [4] | LOCK (3.375" Center to Center) | ||
| 9. | 4S-5017 | [2] | CAGE | |
| 3F-1953 | [2] | DOWEL | ||
| 10. | 7M-7260 | LIQUID GASKET | ||
| 11. | 2P-3395 | [2] | SEAL GROUP | |
| 2P-3394 | [2] | RING | ||
| 12. | 2M-4537 | [2] | DOWEL | |
| 13. | 7S-1516 | [2] | CAGE | |
| 14. | 2M-0849 | [14] | WASHER | |
| 15. | 0S-1585 | [14] | BOLT | |
| 16. | 0S-1589 | [24] | BOLT | |
| 17. | 3B-4510 | [24] | LOCKWASHER | |
| 18. | 2S-7527 | [2] | FLANGE | |
| 19. | 5M-1998 | [2] | DRUM | |
| 20. | 1K-6705 | [2] | BOLT | |
| 21. | 0T-0030 | [2] | NUT | |
| 22. | 5M-1993 | [2] | LOCK | |
| 23. | 5M-1996 | [2] | GASKET | |
| 24. | 2B-7906 | [2] | PIN | |
| 25. | 9H-5402 | [2] | NUT | |
| 26. | 2B-7862 | [2] | RING | |
| 27. | 3S-3471 | [2] | SHAFT | |
| 28. | 2S-6401 | [2] | CUP | |
| 29. | 2S-6400 | [2] | CONE | |
| 30. | 1B-8744 | [2] | KEY | |
| 31. | 6B-6682 | [32] | NUT | |
| 32. | 3B-1472 | [16] | LOCK | |
| 33. | 2S-3946 | [2] | GEAR (52 Teeth) | |
| 34. | 6B-4598 | [32] | BOLT | |
| 35. | 3S-3472 | [2] | HUB |
#SEBP10210092
8P-0398: SEGMENTED SPROCKET GROUP
8P398 SEGMENTED SPROCKET GROUP
Part of 3S3467 Final Drive Group shown on Pages 62 and 63A
Part of 3S3467 Final Drive Group shown on Pages 62 and 63A
Parts for your 572G PIPELAYER:
CATERPILLAR SIS#SEBP10210093
6P-4351: CONTROL GP-STEERING CLUTCH
STEERING CLUTCH HYDRAULIC CONTROL (6P4351 N/S)
3P3564 Control Valve parts are shown on Page 68
3P3564 Control Valve parts are shown on Page 68
Parts for your 572G PIPELAYER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 5B-9079 | [2] | NUT | ||
| 1F-5403 | [2] | END | ||
| 1J-4384 | [2] | PIN | ||
| 3B-4615 | [2] | COTTER PIN | ||
| 2S-8384 | [2] | LEVER | ||
| 1B-8706 | [2] | KEY | ||
| 0T-0924 | [2] | BOLT | ||
| 1B-4203 | [2] | NUT | ||
| 0L-1143 | [2] | BOLT | ||
| 3B-4506 | [2] | LOCKWASHER | ||
| 8M-4988 | [2] | SEAL | ||
| 0L-2070 | [4] | BOLT | ||
| 3B-4506 | [4] | LOCKWASHER | ||
| 3P-3564 Y | [1] | VALVE GROUP | ||
| (Separate Illustration) | ||||
| 1S-0004 | [1] | SEAL | ||
| 5M-6214 | [2] | PLUG | ||
| 3S-2471 | [1] | ELBOW | ||
| (RIGHT HAND) | ||||
| 3S-2472 | [1] | ELBOW | ||
| (LEFT HAND) | ||||
| 0S-1571 | [4] | BOLT | ||
| 3B-4506 | [4] | LOCKWASHER | ||
| 8M-4987 | [2] | SEAL | ||
| USE 7M7280 GASKET SOLUTION | ||||
| 1S-0004 | [1] | SEAL | ||
| 2S-4300 | [1] | TUBE ASSEM. | ||
| (LEFT HAND) | ||||
| 2S-4299 | [1] | TUBE ASSEM. | ||
| (RIGHT HAND) | ||||
| 8M-4446 | [2] | SEAL | ||
| 6P-5379 | [1] | LEVER ASSEM. | ||
| (R.H.) | ||||
| 6P-5380 | [1] | LEVER ASSEM. | ||
| (L.H.) | ||||
| 6K-8088 | [4] | BEARING | ||
| 1M-6179 | [1] | SHAFT | ||
| 4H-6996 | [1] | PIN | ||
| 9F-9206 | [1] | WASHER | ||
| 4B-4285 | [2] | WASHER | ||
| 3B-6175 | [2] | BUMPER | ||
| 3S-7486 | [1] | ROD | ||
| (RIGHT HAND) | ||||
| 3S-7484 | [1] | ROD | ||
| (LEFT HAND) | ||||
| 5B-9079 | [2] | NUT | ||
| 1A-9252 | [2] | END | ||
| 8M-4990 | [1] | SEAL | ||
| 1J-4384 | [2] | PIN | ||
| 3B-4615 | [2] | COTTER PIN | ||
| 1S-0004 | [1] | SEAL | ||
| 5H-0232 | [4] | BOLT | ||
| 1D-5117 | [4] | NUT | ||
| 0L-0829 | [2] | HANDLE | ||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP10210094
5M-2074: CLUTCH GP-STEERING
OIL STEERING CLUTCH (5M2074 N/S)--Part 1 of 2
Parts for your 572G PIPELAYER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 1D-4595 | [16] | BOLT .15 m(6 in.) long | |
| 2. | 9M-6775 | [8] | LOCK | |
| 3. | 5S-0073 | [2] | PLATE | |
| 4. | 1A-3987 | [22] | DISC | |
| 5. | 5S-0071 | [24] | DISC ASSEM. | |
| 6. | 5S-6796 | [2] | DRUM | |
| 7. | 5M-2058 | [16] | SPRING | |
| 8. | 5M-2059 | [16] | SPRING | |
| 9. | 5S-6720 | [16] | SLEEVE .12 m(4.55 in.) long | |
| 10. | 1M-9444 | [2] | RETAINER | |
| 11. | 5M-1988 | [2] | PISTON | |
| 12. | 8M-7438 | [2] | RING | |
| 13. | 0T-0030 | [2] | NUT | |
| 14. | 5M-1994 | [2] | LOCK | |
| 15. | 5M-1991 | [2] | WASHER | |
| 16. | 8M-7437 | [2] | RING | |
| 17. | 2P-3538 C | [2] | SEAL | |
| 18. | 5M-1990 | [2] | PILOT | |
| 19. | 0L-2119 | [16] | WASHER | |
| C | INDICATES CHANGE | |||
#SEBP10210095
5M-2074: CLUTCH GP-STEERING
OIL STEERING CLUTCH (5M2074 N/S)--Part 2 of 2
Parts for your 572G PIPELAYER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 4H-1440 | [2] | PIN | |
| 2. | 5M-2026 | [2] | HUB | |
| 3. | 3B-4510 | [24] | LOCKWASHER | |
| 4. | 0S-1589 | [24] | BOLT | |
| 5. | 4M-3948 | [4] | RING | |
| 6. | 9S-3955 | [2] | CAGE | |
| 7. | 5M-2000 | [2] | SHIM | |
| 8. | 6H-3568 | [2] | CUP | |
| 9. | 6H-3566 | [2] | CONE | |
| 10. | 6B-6683 | [10] | NUT | |
| 11. | 5M-1992 | [5] | LOCK | |
| 12. | 1P-0956 | [1] | SHAFT | |
| 13. | 2P-3992 | [1] | GEAR (52 teeth) | |
| 14. | 4B-0966 | [10] | BOLT | |
| 15. | 0S-1585 | [16] | BOLT | |
| 16. | 3B-4508 | [16] | LOCKWASHER |
#SEBP10210096
3P-3564: CONTROL VALVE GROUP
3P3564 CONTROL VALVE GROUP
Part of 6P4351 Steering Clutch Hydraulic Control Group shown on Page 65
Part of 6P4351 Steering Clutch Hydraulic Control Group shown on Page 65
Parts for your 572G PIPELAYER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 2S-8395 | [1] | SHAFT | |
| 2. | 9H-0223 | [2] | SEAL | |
| 3. | 7F-7983 | [2] | BEARING | |
| 4. | 3B-9363 | [2] | WASHER | |
| 5. | 3S-7005 | [2] | RING | |
| 6. | 8S-1042 | [1] | HOUSING | |
| 7. | 0T-0065 | [1] | BOLT | |
| 8. | 3B-4506 | [6] | LOCKWASHER | |
| 9. | 2S-8396 | [2] | LEVER | |
| 1B-8706 | [2] | KEY | ||
| 10. | 2S-8413 | [1] | STANDPIPE | |
| 11. | 1B-0676 | [2] | PIN | |
| 12. | 2S-8411 | [2] | ROLLER | |
| 13. | 3B-4615 | [2] | COTTER PIN | |
| 14. | 1A-5183 | [1] | BOLT | |
| 15. | 3J-7584 | [2] | BEARING | |
| 16. | 5S-6876 | [2] | SPACER | |
| 17. | 8S-1015 | [1] | PLUNGER | |
| 18. | 1H-4148 | [2] | RETAINER | |
| 19. | 3K-9042 | [2] | RETAINER | |
| 0L-1365 | [2] | WASHER | ||
| 20. | 8S-1043 | [2] | BUSHING | |
| 21. | 5J-4698 | [2] | SPRING (inner) | |
| 22. | 8S-5753 | [2] | SPRING (outer) | |
| 23. | 2H-1730 | [2] | WASHER | |
| 24. | 3P-3716 | [2] | SLUG | |
| 25. | 3P-3717 | [2] | PISTON | |
| 26. | 2S-8398 | [2] | SPRING | |
| 27. | 8M-4445 | [2] | SEAL | |
| 28. | 2S-8399 | [2] | PLUG | |
| 29. | 8H-1037 | [2] | RING | |
| 30. | 2S-8412 | [1] | STANDPIPE | |
| 31. | 8M-4987 | [2] | SEAL | |
| 32. | 8M-8282 | [2] | SEAL | |
| 33. | 8S-1039 | [1] | HOUSING | |
| 34. | 3P-3774 C | [2] | VALVE | |
| 35. | 0S-0509 | [1] | BOLT | |
| 3K-0925 | [1] | WASHER | ||
| 36. | 8S-5716 | [1] | STANDPIPE | |
| 37. | 8S-1016 | [1] | PLUNGER | |
| 38. | 0S-1588 | [2] | BOLT | |
| 39. | 0S-1594 | [3] | BOLT | |
| 40. | 2S-8414 | [1] | GASKET | |
| 41. | 2S-8380 | [1] | SHAFT | |
| C | INDICATES CHANGE | |||
#SEBP10210097
6P-4743: BRAKE GP-STEERING
STEERING BRAKE (6P4743 N/S)--Part 1 of 3
1P4803 Brake Band and Lining parts are shown on Page 74
Note: Quantities shown are those required for both R.H. and L.H. Steering Brakes
1P4803 Brake Band and Lining parts are shown on Page 74
Note: Quantities shown are those required for both R.H. and L.H. Steering Brakes
Parts for your 572G PIPELAYER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 0S-1588 | [4] | BOLT | |
| 2. | 3B-4506 | [12] | LOCKWASHER | |
| 3. | 6P-8874 | [2] | PLATE | |
| 4. | 3P-6104 | [2] | COVER | |
| 7S-2780 | [2] | GASKET | ||
| 5. | 0S-1594 | [6] | BOLT | |
| 6. | 0S-0509 | [2] | BOLT | |
| 7. | 6P-4412 | [1] | SHAFT ASSEM. | |
| 8. | 1A-2457 | [2] | PIN | |
| 0L-0261 | [2] | WASHER | ||
| 3B-4607 | [2] | COTTER PIN | ||
| 9. | 6P-4414 | [2] | LEVER | |
| 6H-3956 | [2] | PIN | ||
| 10. | 1D-4717 | [2] | NUT | |
| 11. | 6P-4413 | [1] | BRACKET | |
| 12. | 8D-8456 C | [1] | SPRING | |
| 13. | 3P-6289 | [1] | ROD ASSEM. (R.H.) | |
| 3P-6288 | [1] | ROD ASSEM. (L.H.) | ||
| (Each Includes) | ||||
| 14. | 9S-1354 | [1] | NUT | |
| 15. | 4M-7930 | [1] | ROD END | |
| 16. | 9S-1354 | [2] | NUT | |
| 17. | 9S-1314 | [2] | ROD END | |
| 18. | 4B-4043 | [8] | BOLT | |
| 3B-4510 | [8] | LOCKWASHER | ||
| 19. | 3B-1915 | [4] | BOLT | |
| 6H-4208 | [2] | LOCK | ||
| 20. | 1P-4803 RY | [1] | BAND AND LINING ASSEM. | |
| (Separate Illustration) | ||||
| 21. | 1M-0424 | [2] | PIN | |
| 3H-6660 | [4] | PIN (spring) | ||
| 22. | 1H-2320 | [4] | SPRING | |
| 23. | 7S-2663 | [2] | SUPPORT ASSEM. | |
| 24. | 9S-1315 | [4] | PIN | |
| 25. | 3B-4617 | [6] | COTTER PIN | |
| 26. | 2B-0974 | [2] | PIN | |
| 27. | 1P-1650 | [2] | ROLLER | |
| 28. | 1P-3592 | [4] | LINK | |
| 29. | 3P-6105 | [2] | RATCHET | |
| 30. | 6P-2772 | [4] | PLATE | |
| R | REMFG PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
| C | INDICATES CHANGE | |||
#SEBP10210098
6P-4743: BRAKE GP-STEERING
STEERING BRAKE (6P4743 N/S)--Part 2 of 3
Note: Quantities shown are those required for both R.H. and L.H. Steering Brakes
Note: Quantities shown are those required for both R.H. and L.H. Steering Brakes
Parts for your 572G PIPELAYER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 6P-4406 | [4] | PIN | |
| 0L-0261 | [4] | WASHER | ||
| 3B-4607 | [4] | COTTER PIN | ||
| 2. | 9D-1058 | [2] | SPRING | |
| 3. | 9H-8918 | [2] | PIN 3 in. (7.62 cm) long | |
| 4. | 1H-1200 | [4] | PIN 1.25 in. (3.18 cm) long | |
| 5. | 8H-0376 | [4] | PIN | |
| 8H-0350 | [8] | RING | ||
| 6. | 0S-0509 | [8] | BOLT | |
| 5B-2200 | [4] | LOCK | ||
| 7. | 8H-0352 | [4] | SHAFT ASSEM. | |
| 8. | 8H-8871 | [4] | SHIM (use as required) | |
| 9. | 8H-0372 | [2] | PLATE | |
| 10. | 1M-3788 | [4] | PIN | |
| 1K-9740 | [8] | RING | ||
| 11. | 7S-6149 | [2] | LEVER ASSEM. | |
| (Each Includes) | ||||
| 12. | 7S-6143 | [2] | BEARING | |
| 13. | 7S-6140 | [2] | BEARING | |
| 14. | 7S-6145 | [1] | BEARING | |
| 15. | 7S-6139 | [8] | LINK | |
| 16. | 1P-4799 | [4] | STRUT | |
| 17. | 4S-9104 | [2] | LEVER ASSEM. | |
| (Each Includes) | ||||
| 18. | 7S-6140 | [2] | BEARING | |
| 19. | 7S-6144 | [1] | BEARING | |
| 20. | 7S-6148 | [2] | LEVER ASSEM. | |
| (Each Includes) | ||||
| 21. | 7S-6140 | [1] | BEARING | |
| 22. | 7S-6145 | [1] | BEARING | |
| 23. | 5H-6624 | [2] | SUPPORT | |
| 24. | 1M-4025 | [2] | WEDGE | |
| 25. | 0L-1351 | [2] | BOLT | |
| 3B-4506 | [2] | LOCKWASHER | ||
| 26. | 2M-7188 | [2] | SCREW | |
| 27. | 8H-8898 | [2] | PIN | |
| 3B-4632 | [2] | COTTER PIN | ||
| 28. | 9S-8220 | [2] | SPRING | |
| 29. | 1P-4524 | [2] | SOCKET | |
| 30. | 1B-9575 | [4] | BOLT | |
| 1D-4716 | [4] | NUT | ||
| 2F-6156 | [4] | LOCK | ||
| 31. | 7S-2666 | [2] | LINK | |
| 32. | 9H-0750 | [2] | PIN | |
| 3B-4629 | [2] | COTTER PIN | ||
| 33. | 7S-2668 | [2] | SHAFT | |
| 4H-6996 | [2] | PIN | ||
| 34. | 1P-3310 | [2] | BELLCRANK ASSEM. | |
| (Each Includes) | ||||
| 35. | 7S-2670 | [1] | BEARING | |
| 36. | 3P-6102 | [1] | LEVER ASSEM. (R.H.) | |
| 6P-2771 | [1] | LEVER ASSEM. (L.H.) | ||
| 37. | 3P-5206 | [2] | PAWL | |
| 031-8590 | [2] | SPACER | ||
#SEBP10210099
6P-4743: BRAKE GP-STEERING
STEERING BRAKE (6P4743 N/S)--Part 3 of 3
Note: Quantities shown are those required for both R.H. and L.H. Steering Brakes
Note: Quantities shown are those required for both R.H. and L.H. Steering Brakes
Parts for your 572G PIPELAYER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 2M-0104 | [1] | PEDAL (L.H.) | |
| 2. | 2M-0103 | [1] | PEDAL (R.H.) | |
| 3. | 9S-4800 | [4] | BRACKET | |
| 9S-6266 | [4] | BEARING | ||
| 1D-6945 | [4] | WASHER | ||
| 4. | 1M-3949 | [1] | SHAFT | |
| 5. | 1B-8722 | [4] | KEY | |
| 6. | 5S-5743 | [2] | LEVER | |
| 7. | 0S-1600 | [4] | BOLT | |
| 1B-4206 | [4] | NUT | ||
| 8. | 0S-1585 | [8] | BOLT | |
| 3B-4508 | [8] | LOCKWASHER | ||
| 9. | 1M-3950 | [1] | SHAFT | |
| 10. | 3P-5208 | [1] | LEVER | |
| 11. | 1B-0676 | [2] | PIN | |
| 12. | 3B-4615 | [3] | COTTER PIN | |
| 13. | 6P-4416 | [1] | ROD | |
| 14. | 6P-4411 | [1] | SHAFT ASSEM. | |
| 4B-4280 | [1] | WASHER | ||
| 15. | 5B-9079 | [2] | NUT | |
| 16. | 1M-1341 | [2] | ROD END | |
| 17. | 3B-4617 | [1] | COTTER PIN | |
| 18. | 0T-0883 | [1] | WASHER |
Information:
POWER TRAIN
DRIVE GP-FINAL
Special Instruction
Assembly and Installation of Conventional Duo-Cone Seals{7561, 7561}
Assembly and Installation of Conventional Duo-Cone Seals{7561, 7561}
Assembly and Installation of Conventional Duo-Cone Seals{7561, 7561}
Specifications
Tool Operating Manual
226-2380 Multi-Purpose Lifting Bracket Group{3258, 4050, 4084, 4208, 7561}
226-2380 Multi-Purpose Lifting Bracket Group{3258, 4050, 4084, 4208, 7561}
226-2380 Multi-Purpose Lifting Bracket Group{3258, 4050, 4084, 4208, 7561}
149-7173 Bearing Handling Bracket Assembly {0374, 0599, 0629, 0632, 4006, 4008, 7551}
149-7173 Bearing Handling Bracket Assembly {0374, 0599, 0629, 0632, 4006, 4008, 7551}
149-7173 Bearing Handling Bracket Assembly {0374, 0599, 0629, 0632, 4006, 4008, 7551}
127-8458 Final Drive Disassembly and Assembly Bench {0374, 0599, 0722, 0727}
127-8458 Final Drive Disassembly and Assembly Bench {0374, 0599, 0722, 0727}
127-8458 Final Drive Disassembly and Assembly Bench {0374, 0599, 0722, 0727}
226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561}
226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561}
226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561}
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
Reuse And Salvage Guidelines
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Salvage of Final Drive Sprocket Hubs For Pipelayers, Track Loaders, and Track-Type Tractors {4050, 4184}
Salvage of Final Drive Sprocket Hubs For Pipelayers, Track Loaders, and Track-Type Tractors {4050, 4184}
Salvage of Final Drive Sprocket Hubs For Pipelayers, Track Loaders, and Track-Type Tractors {4050, 4184}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Final Drive Steering System, Wheel Braking System, and Wheels & Tires Salvage and Reuse Manual Contents {4000, 4050, 4100, 4250, 4300}
Final Drive Steering System, Wheel Braking System, and Wheels & Tires Salvage and Reuse Manual Contents {4000, 4050, 4100, 4250, 4300}
Final Drive Steering System, Wheel Braking System, and Wheels & Tires Salvage and Reuse Manual Contents {4000, 4050, 4100, 4250, 4300}
Brake Drums for Track-Type Tractors and Loaders{4050, 4252}
Brake Drums for Track-Type Tractors and Loaders{4050, 4252}
Brake Drums for Track-Type Tractors and Loaders{4050, 4252}
Procedures to Salvage Thrust Faces on Planetary Carriers {3160, 4050, 4051, 4093}
Procedures to Salvage Thrust Faces on Planetary Carriers {3160, 4050, 4051, 4093}
Procedures to Salvage Thrust Faces on Planetary Carriers {3160, 4050, 4051, 4093}
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Disassembly and Assembly
Service Magazine



