AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

9L6925 FUEL SYSTEM FASTENER GROUP 225 EXCAVATOR


FUEL SYSTEM
PUMP GP-FUEL INJECTION
SERVICE EQUIPMENT AND SUPPLIES
GASKET & SEAL KITS

EXCAVATOR 225 EXCAVATOR 51U
 3208 VEHICULAR ENGINE 51U01043-01043 (MACHINE) SEBP1023 225 51U   (1972)

FUEL SYSTEM

PUMP GP-FUEL INJECTION
8N-8591 GOV & FUEL INJ PUMP GP
8N-8591 GOV & FUEL INJ PUMP GP
FASTENER GP-FUEL PUMP HOUSING
9L-6925 FASTENER GP-FUEL PUMP HOUSING
 

#SEBP10230130
 

9L-6925: FASTENER GP-FUEL PUMP HOUSING

9L6925 FUEL SYSTEM FASTENER GROUP
c163437 SEBP1023
9L6925 FASTENER GP-FUEL PUMP HOUSING Parts scheme
  For full view, you need register

Parts for your 225 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9M-9729 [1] SEAL  
2. 4B-3388 [2] BOLT  
  9M-1974 [2] WASHER  
3. 8M-8157 C [1] SEAL  
  C   INDICATES CHANGE
 

#SEBP10230131
 

GASKET KITS

GASKET KITS
SEBP10230131 SEBP1023
  For full view, you need register

Parts for your 225 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  5P-8539 VALVE GRINDING COMPLETE  
  5P-8538 VALVE GRINDING SINGLE HEAD  
  5P-8545 CENTRAL & LOWER STRUCTURE  
  5P-8543 FRONT STRUCTURE  
  5P-9215 REAR STRUCTURE  
  6N-3723 SLEEVE METERING FUEL SYSTEM  
 

Information:

Truck Engine News
Policy on Testing of Fuel Injectors and Fuel Nozzles {1251}
2008/11/01
Do Not Use the 6V-4022 Fuel Injector Tester to Measure Unit Injector Fuel Flow Rate {0782, 1251, 1254, 1290, 1713}
2008/11/01
Engine News
Policy on Testing of Fuel Injectors and Fuel Nozzles {1251}
2008/11/17
The Pop (Injector) Tester Is not Available for Fuel Injectors {0782, 1251, 1254, 1290, 1713}
2008/11/17
Special Instruction
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Installation of Fuel Injection Pump and Governor Service Group{1286}
Installation of Fuel Injection Pump and Governor Service Group{1286}
Installation Of 5P4810 Bearing In Sleeve Metering Fuel Injection Pump Housing{1253}
Installation Of 5P4810 Bearing In Sleeve Metering Fuel Injection Pump Housing{1253}
Installation Of Short Block Group For 3208 Or Cylinder Block Service Group For 1100, 3100 And 3208 Engines{1201, 1203, 1286}
Installation Of Short Block Group For 3208 Or Cylinder Block Service Group For 1100, 3100 And 3208 Engines{1201, 1203, 1286}
Installation Of 8N628 Service Replacement Bearing For Rear Of Injection Pump Camshaft In Sleeve Metering Fuel Injection Pump Housing{1253}
Installation Of 8N628 Service Replacement Bearing For Rear Of Injection Pump Camshaft In Sleeve Metering Fuel Injection Pump Housing{1253}
Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}
Installation Of 8N628 Bearing{7551, 1253}
Installation Of 8N628 Bearing{7551, 1253}
Use Of FT1525 Alignment Pin, FT1526 Salvage Fixture And FT1698 Bearing Installation Tool For Reconditioning Of 3208 Governor Housings{1265, 1264}
Use Of FT1525 Alignment Pin, FT1526 Salvage Fixture And FT1698 Bearing Installation Tool For Reconditioning Of 3208 Governor Housings{1265, 1264}
Use Of 6V4068 Tool Group For Installation Of 9N5822 Thrust Washer{1253}
Use Of 6V4068 Tool Group For Installation Of 9N5822 Thrust Washer{1253}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Using the 6V7870 Fixture Group and 6V7872 Pliers{1250, 1251}
Using the 6V7870 Fixture Group and 6V7872 Pliers{1250, 1251}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
7000 Series Nozzles{0782}
7000 Series Nozzles{0782}
Test Sequence For Caterpillar 7000 Series Fuel Nozzles {1254}
Test Sequence For Caterpillar 7000 Series Fuel Nozzles {1254}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Service Letter-NACD
The Fuel Injection Pumps Used On Certain Remanufactured 1160 And 3208 Engines Need To Be Inspected For Gummy Deposits
The Fuel Injection Pumps Used On Certain Remanufactured 1160 And 3208 Engines Need To Be Inspected For Gummy Deposits
The Fuel Injection Pumps Used On Certain Remanufactured 1160 And 3208 Engines Need To Be Inspected For Gummy Deposits
The Fuel Injection Pumps Used On Certain Remanufactured 1160 And 3208 Engines Need To Be Inspected For Gummy Deposits
Certain 9L9216 Plunger And Barrel Assemblies Need To Be Removed From Parts Stock
Certain 9L9216 Plunger And Barrel Assemblies Need To Be Removed From Parts Stock
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Product Support Program For Replacing Fuel Nozzles On Certain 3208 Engines
Product Support Program For Replacing Fuel Nozzles On Certain 3208 Engines
The Fuel Injection Pumps Used On Certain Remanufactured 1160 And 3208 Engines Need To Be Inspected For Gummy Deposits
The Fuel Injection Pumps Used On Certain Remanufactured 1160 And 3208 Engines Need To Be Inspected For Gummy Deposits
Service Letter-Australia
The Fuel Injection Pumps Used On Certain Remanufactured 1160 And 3208 Engines Need To Be Inspected For Gummy Deposits
The Fuel Injection Pumps Used On Certain Remanufactured 1160 And 3208 Engines Need To Be Inspected For Gummy Deposits
The Fuel Injection Pumps Used On Certain Remanufactured 1160 And 3208 Engines Need To Be Inspected For Gummy Deposits
The Fuel Injection Pumps Used On Certain Remanufactured 1160 And 3208 Engines Need To Be Inspected For Gummy Deposits
Certain 9L9216 Plunger And Barrel Assemblies Need To Be Removed From Parts Stock
Certain 9L9216 Plunger And Barrel Assemblies Need To Be Removed From Parts Stock
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Product Support Program For Replacing Fuel Nozzles On Certain 3208 Engines
Product Support Program For Replacing Fuel Nozzles On Certain 3208 Engines
The Fuel Injection Pumps Used On Certain Remanufactured 1160 And 3208 Engines Need To Be Inspected For Gummy Deposits
The Fuel Injection Pumps Used On Certain Remanufactured 1160 And 3208 Engines Need To Be Inspected For Gummy Deposits
Service Letter-CFEL
The Fuel Injection Pumps Used On Certain Remanufactured 1160 And 3208 Engines Need To Be Inspected For Gummy Deposits
The Fuel Injection Pumps Used On Certain Remanufactured 1160 And 3208 Engines Need To Be Inspected For Gummy Deposits
The Fuel Injection Pumps Used On Certain Remanufactured 1160 And 3208 Engines Need To Be Inspected For Gummy Deposits
The Fuel Injection Pumps Used On Certain Remanufactured 1160 And 3208 Engines Need To Be Inspected For Gummy Deposits
Certain 9L9216 Plunger And Barrel Assemblies Need To Be Removed From Parts Stock
Certain 9L9216 Plunger And Barrel Assemblies Need To Be Removed From Parts Stock
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Product Support Program For Replacing Fuel Nozzles On Certain 3208 Engines
Product Support Program For Replacing Fuel Nozzles On Certain 3208 Engines
The Fuel Injection Pumps Used On Certain Remanufactured 1160 And 3208 Engines Need To Be Inspected For Gummy Deposits
The Fuel Injection Pumps Used On Certain Remanufactured 1160 And 3208 Engines Need To Be Inspected For Gummy Deposits
Service Letter-CSARL
The Fuel Injection Pumps Used On Certain Remanufactured 1160 And 3208 Engines Need To Be Inspected For Gummy Deposits
The Fuel Injection Pumps Used On Certain Remanufactured 1160 And 3208 Engines Need To Be Inspected For Gummy Deposits
The Fuel Injection Pumps Used On Certain Remanufactured 1160 And 3208 Engines Need To Be Inspected For Gummy Deposits
The Fuel Injection Pumps Used On Certain Remanufactured 1160 And 3208 Engines Need To Be Inspected For Gummy Deposits
Certain 9L9216 Plunger And Barrel Assemblies Need To Be Removed From Parts Stock
Certain 9L9216 Plunger And Barrel Assemblies Need To Be Removed From Parts Stock
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Product Support Program For Replacing Fuel Nozzles On Certain 3208 Engines
Product Support Program For Replacing Fuel Nozzles On Certain 3208 Engines
The Fuel Injection Pumps Used On Certain Remanufactured 1160 And 3208 Engines Need To Be Inspected For Gummy Deposits
The Fuel Injection Pumps Used On Certain Remanufactured 1160 And 3208 Engines Need To Be Inspected For Gummy Deposits
Service Letter-Americas
The Fuel Injection Pumps Used On Certain Remanufactured 1160 And 3208 Engines Need To Be Inspected For Gummy Deposits
The Fuel Injection Pumps Used On Certain Remanufactured 1160 And 3208 Engines Need To Be Inspected For Gummy Deposits
The Fuel Injection Pumps Used On Certain Remanufactured 1160 And 3208 Engines Need To Be Inspected For Gummy Deposits
The Fuel Injection Pumps Used On Certain Remanufactured 1160 And 3208 Engines Need To Be Inspected For Gummy Deposits
Certain 9L9216 Plunger And Barrel Assemblies Need To Be Removed From Parts Stock
Certain 9L9216 Plunger And Barrel Assemblies Need To Be Removed From Parts Stock
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Product Support Program For Replacing Fuel Nozzles On Certain 3208 Engines
Product Support Program For Replacing Fuel Nozzles On Certain 3208 Engines
The Fuel Injection Pumps Used On Certain Remanufactured 1160 And 3208 Engines Need To Be Inspected For Gummy Deposits
The Fuel Injection Pumps Used On Certain Remanufactured 1160 And 3208 Engines Need To Be Inspected For Gummy Deposits
Service Letter-Brazil
The Fuel Injection Pumps Used On Certain Remanufactured 1160 And 3208 Engines Need To Be Inspected For Gummy Deposits
The Fuel Injection Pumps Used On Certain Remanufactured 1160 And 3208 Engines Need To Be Inspected For Gummy Deposits
The Fuel Injection Pumps Used On Certain Remanufactured 1160 And 3208 Engines Need To Be Inspected For Gummy Deposits
The Fuel Injection Pumps Used On Certain Remanufactured 1160 And 3208 Engines Need To Be Inspected For Gummy Deposits
Certain 9L9216 Plunger And Barrel Assemblies Need To Be Removed From Parts Stock
Certain 9L9216 Plunger And Barrel Assemblies Need To Be Removed From Parts Stock
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Product Support Program For Replacing Fuel Nozzles On Certain 3208 Engines
Product Support Program For Replacing Fuel Nozzles On Certain 3208 Engines
The Fuel Injection Pumps Used On Certain Remanufactured 1160 And 3208 Engines Need To Be Inspected For Gummy Deposits
The Fuel Injection Pumps Used On Certain Remanufactured 1160 And 3208 Engines Need To Be Inspected For Gummy Deposits
Service Letter-Truck/Ag/Marine
The Fuel Injection Pumps Used On Certain Remanufactured 1160 And 3208 Engines Need To Be Inspected For Gummy Deposits
The Fuel Injection Pumps Used On Certain Remanufactured 1160 And 3208 Engines Need To Be Inspected For Gummy Deposits
The Fuel Injection Pumps Used On Certain Remanufactured 1160 And 3208 Engines Need To Be Inspected For Gummy Deposits
The Fuel Injection Pumps Used On Certain Remanufactured 1160 And 3208 Engines Need To Be Inspected For Gummy Deposits
Certain 9L9216 Plunger And Barrel Assemblies Need To Be Removed From Parts Stock
Certain 9L9216 Plunger And Barrel Assemblies Need To Be Removed From Parts Stock
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Product Support Program For Replacing Fuel Nozzles On Certain 3208 Engines
Product Support Program For Replacing Fuel Nozzles On Certain 3208 Engines
The Fuel Injection Pumps Used On Certain Remanufactured 1160 And 3208 Engines Need To Be Inspected For Gummy Deposits
The Fuel Injection Pumps Used On Certain Remanufactured 1160 And 3208 Engines Need To Be Inspected For Gummy Deposits
Technical Information Bulletin
Fuel Leaks on the Fuel Injection Pumps on 3208 Applications
Fuel Leaks on the Fuel Injection Pumps on 3208 Applications
Specifications
Fuel Injection Pump
3208 VEHICULAR ENGINE
Governor
3208 VEHICULAR ENGINE
Fuel Transfer Pump
3208 VEHICULAR ENGINE
Automatic Timing Advance Unit
3208 VEHICULAR ENGINE
Drive Gear For The Injection Pump
3208 VEHICULAR ENGINE
Tool Operating Manual
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the TMI System to Retrieve Off Engine Injection Pump Test Specifications for the Fuel Injection Equipment Test Stand{0706, 0782, 1251, 1286}
Using the TMI System to Retrieve Off Engine Injection Pump Test Specifications for the Fuel Injection Equipment Test Stand{0706, 0782, 1251, 1286}
Testing and Adjusting Fuel Injection Pump and Governor on 3064 and 3066 Engines{0374, 0599, 0706}
Testing and Adjusting Fuel Injection Pump and Governor on 3064 and 3066 Engines{0374, 0599, 0706}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}
169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}
Service Letter-China
The Fuel Injection Pumps Used On Certain Remanufactured 1160 And 3208 Engines Need To Be Inspected For Gummy Deposits
The Fuel Injection Pumps Used On Certain Remanufactured 1160 And 3208 Engines Need To Be Inspected For Gummy Deposits
The Fuel Injection Pumps Used On Certain Remanufactured 1160 And 3208 Engines Need To Be Inspected For Gummy Deposits
The Fuel Injection Pumps Used On Certain Remanufactured 1160 And 3208 Engines Need To Be Inspected For Gummy Deposits
Certain 9L9216 Plunger And Barrel Assemblies Need To Be Removed From Parts Stock
Certain 9L9216 Plunger And Barrel Assemblies Need To Be Removed From Parts Stock
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Product Support Program For Replacing Fuel Nozzles On Certain 3208 Engines
Product Support Program For Replacing Fuel Nozzles On Certain 3208 Engines
The Fuel Injection Pumps Used On Certain Remanufactured 1160 And 3208 Engines Need To Be Inspected For Gummy Deposits
The Fuel Injection Pumps Used On Certain Remanufactured 1160 And 3208 Engines Need To Be Inspected For Gummy Deposits
Service Letter-Asia
The Fuel Injection Pumps Used On Certain Remanufactured 1160 And 3208 Engines Need To Be Inspected For Gummy Deposits
The Fuel Injection Pumps Used On Certain Remanufactured 1160 And 3208 Engines Need To Be Inspected For Gummy Deposits
The Fuel Injection Pumps Used On Certain Remanufactured 1160 And 3208 Engines Need To Be Inspected For Gummy Deposits
The Fuel Injection Pumps Used On Certain Remanufactured 1160 And 3208 Engines Need To Be Inspected For Gummy Deposits
Certain 9L9216 Plunger And Barrel Assemblies Need To Be Removed From Parts Stock
Certain 9L9216 Plunger And Barrel Assemblies Need To Be Removed From Parts Stock
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Product Support Program For Replacing Fuel Nozzles On Certain 3208 Engines
Product Support Program For Replacing Fuel Nozzles On Certain 3208 Engines
The Fuel Injection Pumps Used On Certain Remanufactured 1160 And 3208 Engines Need To Be Inspected For Gummy Deposits
The Fuel Injection Pumps Used On Certain Remanufactured 1160 And 3208 Engines Need To Be Inspected For Gummy Deposits
Reuse And Salvage Guidelines
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
Information Release Memo
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Service Letter-APD
The Fuel Injection Pumps Used On Certain Remanufactured 1160 And 3208 Engines Need To Be Inspected For Gummy Deposits
The Fuel Injection Pumps Used On Certain Remanufactured 1160 And 3208 Engines Need To Be Inspected For Gummy Deposits
The Fuel Injection Pumps Used On Certain Remanufactured 1160 And 3208 Engines Need To Be Inspected For Gummy Deposits
The Fuel Injection Pumps Used On Certain Remanufactured 1160 And 3208 Engines Need To Be Inspected For Gummy Deposits
Certain 9L9216 Plunger And Barrel Assemblies Need To Be Removed From Parts Stock
Certain 9L9216 Plunger And Barrel Assemblies Need To Be Removed From Parts Stock
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Product Support Program For Replacing Fuel Nozzles On Certain 3208 Engines
Product Support Program For Replacing Fuel Nozzles On Certain 3208 Engines
The Fuel Injection Pumps Used On Certain Remanufactured 1160 And 3208 Engines Need To Be Inspected For Gummy Deposits
The Fuel Injection Pumps Used On Certain Remanufactured 1160 And 3208 Engines Need To Be Inspected For Gummy Deposits
Disassembly and Assembly
Fuel Transfer Pump
225 EXCAVATOR ENGINE
Camshaft Gears (Engines With Taper Drive for Fuel Injection Pump)
225 EXCAVATOR ENGINE
Camshaft Gears (Engines With Bolt on Drive for Fuel Injection Pump)
225 EXCAVATOR ENGINE
Camshaft And Gears (Engines With Taper Drive for Fuel Injection Pump)
225 EXCAVATOR ENGINE
Camshaft And Gears (Engines With Bolt on Drive for Fuel Injection Pump)
225 EXCAVATOR ENGINE
Fuel Injection Pump Housing And Governor (Engines With Taper Drive for Fuel Injection Pump)
225 EXCAVATOR ENGINE
Fuel Injection Pump Housing And Governor (Engines With Bolt on Drive for Fuel Injection Pump)
225 EXCAVATOR ENGINE
Governor
225 EXCAVATOR ENGINE
Fuel Injection Pump Housing
225 EXCAVATOR ENGINE
Check Valve And Bypass Valve
SLEEVE METERING FUEL SYSTEM FOT 4.5" BORE V8 DIRECT INJECTIO
Fuel Injection Pumps
SLEEVE METERING FUEL SYSTEM FOT 4.5" BORE V8 DIRECT INJECTIO
Fuel Transfer Pump
SLEEVE METERING FUEL SYSTEM FOT 4.5" BORE V8 DIRECT INJECTIO
Fuel Injection Pump Housing And Governor
SLEEVE METERING FUEL SYSTEM FOT 4.5" BORE V8 DIRECT INJECTIO
Governor
SLEEVE METERING FUEL SYSTEM FOT 4.5" BORE V8 DIRECT INJECTIO
Fuel Injection Pump Housing
SLEEVE METERING FUEL SYSTEM FOT 4.5" BORE V8 DIRECT INJECTIO
Fuel Injection Pump Housing And Governor
SLEEVE METERING FUEL SYSTEM FOT 4.5" BORE V8 DIRECT INJECTIO
Service Magazine
New Check Valve Used In Fuel Injection Pump Assembly{1251}
1980/05/26
1980 Caterpillar Remanufactured Products Catalog Is Now Available{0374}
1980/06/23
6V3129 Nozzle Puller Group And FT1533 Nozzle Assembly Adapter Can Be Used To Remove Fuel Nozzles{0621,1254}
1981/02/02
6V4163 Bit And 6V4164 Driver Now Available For Removal Of Bolts For Flyweight Carrier{0612,1264}
1981/02/23
High Concentration Of Aluminum In Oil Analysis Can Be The Result Of Rocker Arm Support Wear{1318,1102}
1981/03/02
Check All Settings When Fuel Injection Pump Group Is Installed{1286,1264,1251,1253}
1981/03/30
Remove Direct Injection Fuel Nozzles With 6V4061 And 6V4054 Nozzle Pullers{0621}
1981/05/18
Improvements To Optional Modification Of 5P4150 Nozzle Tester{0651,1254}
1981/08/17
FT1632 Bolt Used During Removal Of Sleeve From Sleeve Metering Fuel System{0621,1251,1253}
1981/08/31
Thrust Washer Used In Pump Housing For Sleeve Metering Fuel System{1253,1286}
1981/08/31
Bent Lever For Fuel Shut-Off Solenoid Can Cause Low Engine Performance{1286,1259}
1982/02/01
New Gasket Used In Governor And Fuel Injection Pump Group{1259,1286}
1982/03/01
New 6V4950 Injection Line Speed Pickup Group Used With 6V2100 Multitach{0651}
1982/05/03
Use Correct Torque To Prevent Broken Rocker Arm Shafts{1102}
1982/07/05
Modification Of 2P8315 Bracket Assembly{0652,1286}
1982/08/16
New Thrust Washer Can Prevent Wrong Oil Sample Readings{1102}
1982/08/23
New Rocker Arm Assemblies Used {1102}
1982/09/13
Do Not Use A Wire Brush On Fuel Nozzles{1254}
1982/09/27
New Fuel Nozzle Test Sheet Available{0651,1254}
1982/10/04
Bulged Capsule-Type Fuel Nozzles{1254}
1982/10/11
FT1698 Driver Can Be Used For Reconditioning Of Governor Housing{0626,0665,1264,1286}
1982/10/18
New Seal Used On Governor Control Shaft{1264,1265}
1982/11/22
Service Parts Available For The 5P4150 Nozzle Testing Group{0651,0652}
1982/11/22
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint{1264}
1983/11/07
Sleeve Can Be Used For Reconditioning The Mounting Bore For The Fuel Pump Housing In The Cylinder Block{1201}
1983/11/21
6V4163 Bit And 6V4164 Driver Now Available For Removal Of Bolts For Flyweight Carrier{0612,1264}
1983/12/05
New Fuel Injection Pumps, Fuel Injection Lines, Fuel Injection Nozzles, and Piston And Rod Groups Used On Some Engines{1000,1225,1251,1252,1254}
1984/08/13
Tune-Up Kit And Remanufactured Nozzles Available{1254,1074,1107}
1984/09/03
Information For Testing 8N7004, 4W7011 And 4W7015 Fuel Injection Nozzles{1254}
1984/10/22
Identification Of Camshaft Groups And Valve Mechanism Groups{1210,1102}
1984/11/26
Valve Lash Adjustment Not A Warranty Item {1102,1105}
1985/01/14
New Compression Washers (Gas Seals) Used On 7000 Series Fuel Injection Nozzles{1254,1250}
1985/04/01
Check Fuel Injection Nozzles In Overheated Engines{1254}
1985/09/02
Comparison Of Fuel Timing Tolerances For Field Settings{1250,1251,1281}
1985/10/28
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing{1253}
1986/03/10
Bleed Screw Washer (Seal) Must Be Replaced If Bleed Screw Removed From Fuel Nozzle{1254}
1986/04/07
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers{1257,1264}
1986/06/09
Update Information For Caterpillar Fuel Injection Equipment Test Stand{0782}
1986/06/16
Changes Have Been Made To OT Microfiche (Fuel Setting And Related Information){1250,1251,1281}
1986/06/16
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22
Use Correct Compression Seal Washer (Gas Seal) On 7000 Series Fuel Injection Nozzles{1254,1250}
1986/09/29
Nylon Seals Used On Lockwire To Seal Critical Areas; All Subsidiary Dealers Can Now Order Parts Service Seals {1257,1264}
1986/11/03
New Tie Bars Improve Stability Of The Fuel Injection Test Bench{0652}
1977/01/17
Test Used Fuel Nozzles Before You Install New Nozzles; Tips On Test Procedures{1254,0651,0336}
1977/02/14
Drains In New Fuel Injection Pump Housing And Governor Housing Prevent Possible Corrosion And Freezing Damage{1286}
1977/03/07
Changes To The Injection Pump And The Fuel Setting{1251,1257}
1977/09/19
With New 5P7448 Adapter, Earlier Fuel Injection Valves And Nozzles Can Be Tested And Adjusted On The 5P4150 Nozzle Testing Group{0651,1254}
1977/10/31
Orifice Reverse Flow Check Valve Used In Fuel Injection Pumps{1251,1254}
1987/11/23
Probable Causes Of Low Fuel Delivery During Testing On Fuel Injection Test Benches{0650,1250}
1978/02/06
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
Stronger Fuel Inlet Flanges Prevent Parts Damage And Keeps Air Out Of The Fuel System{1253}
1978/05/15
Improved Guide Pin For Fuel Injection Pump Lifters{1251}
1978/08/21
New Camshaft Rear Bearing For The Sleeve Metering Fuel System{1253}
1978/09/04
New Drive Adapters For Fuel Injection Test Bench{0650}
1978/09/11
Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25
Adjustment Procedures And Lubrication Recommendations For Drive Pulleys On Caterpillar Fuel Injection Test Bench{0652}
1978/09/25
Caterpillar Fuel Injection Test Bench Book{0374}
1978/10/16
A Washer With Closer Tolerances Is Now Used In The Governor And Fuel Pump Drive Group{1288,7462}
1978/11/20
New FT2253 Cable Assembly Drawing Available For Kent-Moore Fuel Injection Test Bench{0782}
1988/01/04
Some Components Of The Variable Pulley And Adjustable Pulley On The Kent-Moore Fuel Injection Test Bench Are Available From Caterpillar{0782}
1988/04/18
Check Valve Added To Keep Air From Entering Fuel System {1264}
1988/10/03
New Fuel Injection Nozzles Are Used In 3208 Engines{1254}
1979/03/05
Improvements Made To Fuel Injection Pump And Governor Group{1253,1281,1286}
1979/03/05
Ether Starting Aid System Improves Cold Weather Starts{1456}
1979/03/19
Careful, Correct Installation And Maintenance Of Fuel Injection Lines Is Very Important To Prevent Possible Engine Damage, Fire And Other Problems{1252}
1979/04/23
Part Numbers Of Bearings To Use For Service Replacement In Fuel Injection Pump Housings For Sleeve Metering Fuel Systems; Correction To Special Instruction For Installation.{1253}
1979/05/07
Do Not Use Later 9N3979 Nozzle Assemblies In Plate Of Earlier Nozzle Assemblies{1254}
1979/05/21
New Washers For Injection Valve Nozzles Must Be Added To Valve Grinding Gasket Kit When Used With Later Engines{7555,1254}
1979/05/21
9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28
Test Specifications Now Available For 9N3979 And 9N2366 Pencil Type Fuel Nozzle Assemblies{0652,1254}
1979/06/11
Fuel Injection Line For Injection Test Bench Is Available From Caterpillar{0652,1250}
1979/07/02
Changes Made To 8S2243 And 8S4613 Wrenches Used On Fuel Injection Pumps{0612,1251}
1979/08/06
New Governor Housing Assembly Used In Governor And Fuel Injection Pump Group{1253,1264}
1979/08/27
General Information -- Diesel Fuels In Cold Temperature Operation{1280}
1979/12/17
New Bleed Screw Used On 7000 Series Fuel Injection Nozzles{1254}
1989/03/06
Governor Springs For Sleeve Metering Fuel Systems {1264}
1990/05/21
Compression Ratio Increased On Remanufactured OR1094 & OR1095 Engines To Reduce Amount Of White Smoke On Cold Weather Start-Ups{1000,1254,1290}
1991/09/30
New Spring Used In Governor Control Groups{1265}
1992/04/20
Identification Of Remanufactured Direct Injection Fuel Nozzles (DIFN){1254}
1992/04/20
Date Code On 7000 Series Fuel Injection Nozzles; New Seals Used In 7000 Series Fuel Injection Nozzles{1254}
1994/05/23
Tamper Resistant Plugs And Tamper Resistant Bolts Used To Prevent Changes To Fuel Ratio Control (FRC) Setting{1278,1287}
1996/01/22
New Hold-Down Bolts For The Sleeve Metering Fuel System (SMFS) Governor Housing {1251}
1996/09/16
Improved Sleeve Metering Fuel System (SMFS) 8.5 mm (.34 in) Fuel Pump Plunger Eliminates Plunger And Sleeve Scuffing{1251}
1996/09/30
Improved Fuel Pump Plunger Helps Prevent Plunger And Sleeve Scuffing In Service 8.5 mm Fuel Injection Pump Assembly For Sleeve Metering Fuel System (SMFS) Governor And Fuel Injection Pump Groups{1251,1286}
1996/11/11
Do Not Reuse the Hold Down Bolts for the Fuel Injectors On All Products that Contain C9 Through C32 Engines {1290}
2014/08/01
Policy on Testing of Fuel Injectors and Fuel Nozzles {1251}
2008/11/17
Do Not Use the 6V-4022 Fuel Injector Tester to Measure Unit Injector Fuel Flow Rate {1251, 1254, 1290, 1713}
2008/11/17
The Pop (Injector) Tester Is not Available for Fuel Injectors {0782, 1251, 1254, 1290, 1713}
2008/11/17
Do not Use the 6V-4022 Fuel Injector Tester to Test Unit Injectors {0782, 1251, 1254, 1290, 1713}
2008/12/01
Improved Manufacturing Processes Are Used for Remanufactured Fuel Injector Nozzles That Are Used in Certain Machine Engines {1251, 1290}
2012/07/09
Reannouncing the Appearance Change to Cat Reman Direct Injection Fuel Nozzles for Certain Machines {1250, 1251, 1290, 1713}
2013/10/17

Caterpillar Parts SIS Catalog 225 :

GOVERNOR CONTROL GROUP
4N-3868 GOVERNOR CONTROL GROUP
CONTROL GP-GOVERNOR
4N-9399 CONTROL GP-GOVERNOR
CONVERSION GP-GOVERNOR
4N-7959 CONVERSION GP-GOVERNOR
CONVERSION GP-GOVERNOR
4N-7959 CONVERSION GP-GOVERNOR
CONVERSION GP-GOVERNOR
4N-7959 CONVERSION GP-GOVERNOR
LINES GP-FUEL INJECTION
9N-0119 LINES GP-FUEL INJECTION
LINES GP-FUEL INJECTION
9N-0119 LINES GP-FUEL INJECTION
SOLENOID GP-SHUT-OFF
7N-8886 SOLENOID GP-SHUT-OFF
GASKET KITS

Truck sale:

CATERPILLAR 225 1985
 
CATERPILLAR 225 1985
- TRACK EXCAVATORS
ZEPPELIN BAUMASCHINEN
Gebrauchtmaschinen Pool Karl-Bröger-Strasse 8 - Alsfeld
 
 
CATERPILLAR 225 1979
- TRACK EXCAVATORS
PETERSON TRACTOR CO
CATERPILLAR 225 1984
 
CATERPILLAR 225 1984
- TRACK EXCAVATORS
MILTON CAT
100 Quarry Drive - MILFORD - Massachus
1986 CAT 225
Call 
1986 CAT 225

Sound Heavy Machinery
North Carolina
1977 CAT 225
USD $26,900 
1977 CAT 225

Construction Station
Wayne, Michigan
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.