AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

5S4034 FINAL DRIVE, WHEEL AND BRAKE--29.50 x 29 Tubeless Tires--4 Required Serial No. 36H1183 to 36H1721 inclusive Wheel Brake parts are shown on Page 193 824B


POWER TRAIN
AXLE GP
BRAKING SYSTEM
BRAKE GP
BASIC ENGINE
HOUSING GP-FRONT
POWER TRAIN
AXLE GP

WHEEL DOZER 824B WHEEL DOZER 36H
 824B TRACTOR 36H01139-UP (MACHINE) POWERED BY D343 ENGINE SEBP1037 824B 36H   (1965)

POWER TRAIN

AXLE GP
FINAL DRIVE, WHEEL AND BRAKE
5S-4034 FINAL DRIVE, WHEEL AND BRAKE
FINAL DRIVE, WHEEL AND BRAKE
5S-4034 FINAL DRIVE, WHEEL AND BRAKE
FINAL DRIVE, WHEEL AND BRAKE
5S-4034 FINAL DRIVE, WHEEL AND BRAKE
REAR AXLE HOUSING AND TRUNNION
1S-1938 REAR AXLE HOUSING AND TRUNNION
REAR AXLE HOUSING AND TRUNNION
1S-1938 REAR AXLE HOUSING AND TRUNNION
REAR AXLE HOUSING AND TRUNNION GROUP
1S-1938 REAR AXLE HOUSING AND TRUNNION GROUP
REAR AXLE HOUSING AND TRUNNION GROUP
1S-1938 REAR AXLE HOUSING AND TRUNNION GROUP
REAR AXLE HOUSING AND TRUNNION GROUP
1S-1938 REAR AXLE HOUSING AND TRUNNION GROUP
REAR AXLE HOUSING AND TRUNNION GROUP
1S-1938 REAR AXLE HOUSING AND TRUNNION GROUP
AXLE SHAFT GROUP
8K-0073 AXLE SHAFT GROUP
 

#SEBP10370280
 

5S-4034: FINAL DRIVE, WHEEL AND BRAKE

5S4034 FINAL DRIVE, WHEEL AND BRAKE--29.50 x 29 Tubeless Tires--4 Required
Serial No. 36H1183 to 36H1721 inclusive
Wheel Brake parts are shown on Page 193
c203622 SEBP1037
5S4034 FINAL DRIVE, WHEEL AND BRAKE Parts scheme
  For full view, you need register

Parts for your 824B WHEEL DOZER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3F-9194 [2] FLANGE  
2. 1H-8278 [1] SEAL  
3. 1P-9594 C [1] CUP  
  1P-9593 C [1] CONE  
4. 2P-1823 C [1] CUP  
  2P-1824 C [1] CONE  
5. 4D-1570 [1] GEAR (110 Teeth)  
6. 4D-3151 [6] BEARING  
7. 4D-1569 [3] GEAR (44 Teeth)  
8. 3D-8418 [3] SPACER  
9. 2D-2444 [1] SEAL  
10. 8K-6518 C [1] BAND  
11. 3D-5852 [1] RING  
12. 3D-8835 [1] DRIVER  
13. 3D-8422 [1] SEAL  
14. 4D-3188 [6] SPACER  
15. 3D-9060 [6] SPACER  
16. 3D-8416 [3] PIN  
17. 2F-6067 [3] RING  
18. 7K-3734 [10] BOLT  
  5P-0562 CH LOCKWIRE 12.19 dm(48 in.)  
19. 8D-3883 C [2] BOLT  
20. 8D-3844 C [1] PLATE  
21. 7D-5295 [1] COVER  
22. 7K-3736 [1] RING  
  7K-3735 [1] SHIM PACK  
23. 2A-3852 [1] PLUG  
  1S-3889 [1] WASHER  
  5F-1678 [1] SEAL  
24. 4D-1577 [1] SEAL  
25. 4D-5780 [1] CARRIER ASSEM.  
26. 2D-8153 [6] STUD  
  1D-4719 [6] NUT  
  3B-4508 [6] LOCKWASHER  
27. 1B-4331 [22] NUT  
  3B-4512 [22] LOCKWASHER  
28. 5F-0304 [1] PLUG  
  1S-3888 [1] WASHER  
  3H-3385 [1] SEAL  
29. 6F-4855 [1] SEAL  
30. 6H-1717 [8] BOLT  
  4F-7356 [4] LOCK  
31. 4D-3173 [4] RETAINER  
32. 8D-2091 C [1] HUB (110 Teeth)  
33. 3D-2239 [1] VALVE ASSEM.  
  2D-2510 [1] VALVE  
  6F-3930 [1] CORE  
34. 6F-3931 [1] CAP  
35. 9K-4254 C [1] WHEEL ASSEM.  
36. 3D-0490 [27] STUD  
37. 4D-6579 [22] STUD  
38. 6D-2347 [1] RETAINER ASSEM.  
  0S-0130 [3] PIN  
39. 5M-1177 R [1] SEAL GROUP  
  4M-0660 [2] RING  
40. 9D-8717 C [1] SPACER  
41. 8K-6929 RC [1] HOUSING  
42. 9M-3948 [18] STUD  
  1B-4333 [18] NUT  
  3B-4516 [18] LOCKWASHER  
43. 7M-5130 C [1] PIN  
44. 9S-4188 C [1] PLUG  
  4K-1388 [1] SEAL  
45. Y [1] BRAKE  
    (Separate Illustration)
46. 1M-9015 [1] SEAL  
47. 2B-7409 [1] PLUG .25 in. (6.35 mm) O.D.  
    -OR-
  1B-5174 C [1] PLUG .75 in.(19.05 mm)O.D.  
  R   REMFG PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
  C   INDICATES CHANGE
  H   ORDER BY THE DECIMETRE
 

#SEBP10370281
 

5S-4034: FINAL DRIVE, WHEEL AND BRAKE

5S4034 FINAL DRIVE, WHEEL AND BRAKE--29.50 x 29 Tubeless Tires--4 Required
Serial No. 36H1722-Up
1V9229 Brake parts are shown on Page 193
c170554 SEBP1037
5S4034 FINAL DRIVE, WHEEL AND BRAKE Parts scheme
  For full view, you need register

Parts for your 824B WHEEL DOZER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3F-9194 [2] FLANGE  
2. 1H-8278 [1] SEAL  
3. 1P-9594 [1] CUP  
  1P-9593 [1] CONE  
4. 2P-1823 [1] CUP  
  2P-1824 [1] CONE  
5. 4D-1570 [1] GEAR (110 teeth)  
6. 4D-3151 [6] BEARING  
7. 4D-1569 [3] GEAR (44 teeth)  
8. 3D-8418 [3] SPACER  
9. 2D-2444 [1] SEAL  
10. 8K-6518 [1] BAND  
11. 3D-5852 [1] RING  
12. 3D-8835 [1] DRIVER  
13. 3D-8422 [1] SEAL  
14. 4D-3188 [6] SPACER  
15. 3D-9060 [6] SPACER  
16. 2G-6571 C [3] SHAFT  
17. 2F-6067 [3] RING  
18. 7K-3734 [10] BOLT  
  5P-6029 H LOCKWIRE 1.219 m(.48 in.)  
19. 8D-3883 C [4] BOLT  
20. 2G-4553 C [1] PLATE  
21. 2G-5884 C [1] COVER  
22. 7K-3736 [1] RING  
  7K-3735 [1] SHIM PACK  
23. 2A-3852 [1] PLUG  
  1S-3889 [1] WASHER  
  5F-1678 [1] SEAL  
24. 4D-1577 [1] SEAL  
25. 4D-5780 [1] CARRIER ASSEM.  
26. 2D-8153 [6] STUD  
  1D-4719 [6] NUT  
  3B-4508 [6] LOCKWASHER  
27. 1B-4331 [22] NUT  
  3B-4512 [22] LOCKWASHER  
28. 5F-0304 [1] PLUG  
  1S-3888 [1] WASHER  
  3H-3385 [1] SEAL  
29. 6F-4855 [1] SEAL  
30. 0S-1621 C [8] BOLT  
  4F-7356 [4] LOCK  
31. 4D-3173 [4] RETAINER  
32. 8D-2091 [1] HUB (110 teeth)  
33. 3D-2239 [1] VALVE ASSEM.  
  2D-2510 [1] VALVE  
  6F-3930 [1] CORE  
34. 6F-3931 [1] CAP  
35. 9K-4254 [1] WHEEL ASSEM.  
36. 3D-0490 [27] STUD  
37. 4D-6579 [22] STUD  
38. 6D-2347 [1] RETAINER ASSEM.  
  0S-0130 [3] PIN  
39. 5M-1177 R [1] SEAL GROUP  
  4M-0660 [2] RING  
40. 9D-8717 [1] SPACER  
41. 8K-6929 R [1] HOUSING  
42. 9M-3948 [18] STUD  
  1B-4333 [18] NUT  
  3B-4516 [18] LOCKWASHER  
43. 7M-5130 [1] PIN  
44. 9S-4188 [1] PLUG  
  4K-1388 [1] SEAL  
45. 1V-9229 YC [1] BRAKE GROUP  
    (Separate Illustration)
46. 1M-9015 [1] SEAL  
47. 1B-5174 [1] PLUG  
  R   REMFG PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
  H   ORDER BY THE METER
  C   INDICATES CHANGE
 

#SEBP10370282
 

3K-0061: WHEEL BRAKE

WHEEL BRAKE (3K61 N/S)
Serial No. 36H1139 to 36H1325 inclusive. Part of Final Drive, Wheel and Brake shown
on Pages 191 & 192. Note: 1V9295 Brake Expander Service Group, consisting of 1-Tube
and Shield Assembly (1V6586 N/S) and 1-Form GMG00065, is available for replacement
of each 8S3094 Tube Assembly
c106724 SEBP1037
3K0061 WHEEL BRAKE Parts scheme
  For full view, you need register

Parts for your 824B WHEEL DOZER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  5D-5376 [1] DRUM ASSEM.  
  8S-4501 [12] LINING AND SHOE ASSEM.  
  [12] SPRING  
    (Parts of 8S3089 Brake Assem.)
  8S-3089 [1] BRAKE ASSEM.  
  8S-4496 [2] FRAME AND TORQUE BAR ASSEM.  
  4D-2297 [4] SEAL  
    (Parts of 8S3089 Brake Assem.)
  4D-5536 [1] GUARD  
  8S-3094 [1] TUBE ASSEM.  
    (Part of 8S3089 Brake Assem.)
  0S-1625 [36] BOLT  
  4D-3704 [36] WASHER  
  1F-7958 [27] NUT  
  3B-4508 [27] LOCKWASHER  
    THE FOLLOWING REPAIR KITS ARE AVAILABLE:
  8S-4502 [1] KIT (Retracting Spring)  
    (Includes 12 Springs)
  8S-4500 [1] KIT (Brake Lining)  
    (Includes Springs and Lining and Shoe Assemblies)
 

#SEBP10370283
 

1V-9229: WHEEL BRAKE

WHEEL BRAKE (1V9229 N/S)
Serial No. 36H1326-Up
Part of Final Drive, Wheel and Brake shown on Page 192
c152040 SEBP1037
1V9229 WHEEL BRAKE Parts scheme
  For full view, you need register

Parts for your 824B WHEEL DOZER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  5D-5376 [1] DRUM ASSEM.  
  8S-4501 [12] LINING AND SHOE ASSEM.  
  [12] SPRING  
    (Parts of 1V9232 Assem.)
  1V-9232 [1] BRAKE ASSEM.  
  8S-4496 [2] FRAME AND TORQUE BAR ASSEM.  
  4D-2297 [4] SEAL  
    (Parts of 1V9232 Assem.)
  4D-5536 [1] GUARD  
  1V-6586 [1] TUBE ASSEM.  
    (Part of 1V9232 Assem.)
  0S-1625 [36] BOLT  
  4D-3704 [36] WASHER  
  1F-7958 [27] NUT  
  3B-4508 [27] LOCKWASHER  
    THE FOLLOWING REPAIR KITS ARE AVAILABLE:
  8S-4502 [1] KIT (Retracting Spring)  
    (Includes 12 Springs)
  8S-4500 [1] KIT (Brake Lining)  
    (Includes Springs and Lining and Shoe Assemblies)
 

#SEBP10370284
 

3K-9596: FRONT AXLE HOUSING

FRONT AXLE HOUSING (3K9596 N/S)
Serial No. 36H1139 to 36H1216 inclusive
c106725 SEBP1037
3K9596 FRONT AXLE HOUSING Parts scheme
  For full view, you need register

Parts for your 824B WHEEL DOZER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  4H-6112 [1] BREATHER  
  2H-4010 [6] BOLT  
  2J-3507 [6] NUT  
  9M-2828 [6] WASHER  
  6M-1622 [1] DOWEL  
    (PART OF HOUSING ASSEM. 8S2151)
  3F-1547 [1] SEAL  
  8S-0003 [1] TUBE ASSEM  
  8F-4469 [1] SEAL  
  0L-1178 [6] BOLT  
  3B-4512 [6] LOCKWASHER  
  3K-2434 [1] PLUG  
  5B-3265 [1] GASKET  
  3B-2225 [1] DOWEL  
    (PART OF HOUSING ASSEM. 8S2151)
  8S-2151 [1] HOUSING ASSEM.  
  2H-4010 [6] BOLT  
  2J-3507 [6] NUT  
  9M-2828 [6] WASHER  
  6M-1622 [1] DOWEL  
    (PART OF HOUSING ASSEM. 8S2151)
  3F-1547 [1] SEAL  
  8S-0003 [1] TUBE ASSEM.  
  8F-4469 [1] SEAL  
  2D-6533 [1] SEAL  
  4K-1186 [1] COVER  
  8M-3837 [1] PLUG  
  5B-3265 [1] GASKET  
 

#SEBP10370285
 

9K-5656: FRONT AXLE HOUSING GROUP

9K5656 FRONT AXLE HOUSING GROUP
Serial No. 36H1217 to 36H1770 inclusive
c203602 SEBP1037
9K5656 FRONT AXLE HOUSING GROUP Parts scheme
  For full view, you need register

Parts for your 824B WHEEL DOZER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9K-5655 [1] HOUSING ASSEM.  
    (Includes)
2. 3B-2225 [1] DOWEL  
3. 6M-1622 [2] DOWEL  
4. 4H-6112 [1] BREATHER  
5. 2H-4010 [12] BOLT  
  2J-3507 [12] NUT  
  9M-2828 [12] WASHER  
6. 8M-3837 [1] PLUG (magnetic)  
7. 5B-3265 [2] GASKET  
8. 3K-2434 [1] PLUG  
9. 8F-4469 [2] SEAL  
10. 8S-0003 [2] TUBE ASSEM.  
11. 3F-1547 [2] SEAL  
12. 2R-1576 C [1] ADAPTER  
  C   INDICATES CHANGE
 

#SEBP10370286
 

9K-5656: FRONT AXLE HOUSING GROUP

9K5656 FRONT AXLE HOUSING GROUP
Serial No. 36H1771-Up
c218258 SEBP1037
9K5656 FRONT AXLE HOUSING GROUP Parts scheme
  For full view, you need register

Parts for your 824B WHEEL DOZER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4V-0367 C [1] HOUSING ASSEM.  
    (Includes)
2. 2K-9062 [1] PIN  
3. 6M-1622 [2] DOWEL  
4. 2V-6140 [1] TUBE ASSEM.  
5. 6J-4081 C [12] BOLT  
  2J-3507 [12] NUT  
  9M-2828 [12] WASHER  
6. 8M-3837 [1] PLUG (magnetic)  
7. 5B-3265 [2] GASKET  
8. 3K-2434 [1] PLUG  
9. 2R-1576 C [1] ADAPTER  
10. 8S-5820 C [1] BREATHER  
  C   INDICATES CHANGE
 

#SEBP10370287
 

1S-1938: REAR AXLE HOUSING AND TRUNNION

REAR AXLE HOUSING AND TRUNNION (1S1938 N/S)--Part 1 of 2
Serial No. 36H1139 to 36H1355 inclusive
c110709 SEBP1037
1S1938 REAR AXLE HOUSING AND TRUNNION Parts scheme
  For full view, you need register

Parts for your 824B WHEEL DOZER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  4H-6112 [1] BREATHER  
  1J-1759 [1] PLUG  
  5B-3265 [1] GASKET  
  1L-8181 [1] CLIP  
  8B-8679 [1] SPACER  
  0S-1588 [1] BOLT  
  3B-4506 [1] LOCKWASHER  
  4B-4278 [1] WASHER  
  6M-1608 [1] TUBE ASSEM.  
  1S-1940 [1] TUBE  
  9S-1350 [2] CLIP  
  3D-2023 [2] GROMMET  
  0T-0102 [1] BOLT  
  3B-4506 [1] LOCKWASHER  
  3B-8998 [1] FITTING  
  1F-1344 [1] NUT  
    (PART OF FITTING 3B8998)
  0T-0102 [1] BOLT  
  3B-4506 [1] LOCKWASHER  
  1D-4647 [8] BOLT  
  2J-3507 [8] NUT  
  9M-2828 [8] WASHER  
  7H-7055 [1] CLIP  
  3D-2023 [1] GROMMET  
  6M-1622 [2] DOWEL  
  8S-0003 [2] TUBE ASSEM.  
  3F-1547 [2] SEAL  
    (7.484" INSIDE DIAMETER)
  8F-4469 [2] SEAL  
    (5.382" INSIDE DIAMETER)
  4B-5006 [2] FITTING  
  3B-8995 [2] FITTING  
  1F-1344 [2] NUT  
    (1 IN EACH FITTING 3B8995)
  1S-1939 [1] TUBE  
  0T-0102 [1] BOLT  
  3B-4506 [1] LOCKWASHER  
  7H-7055 [1] CLIP  
  3D-2023 [1] GROMMET  
  3B-8998 [1] FITTING  
  1F-1344 [1] NUT  
    (PART OF FITTING 3B8998)
  0T-0102 [1] BOLT  
  3B-4506 [1] LOCKWASHER  
  9S-1350 [1] CLIP  
  3D-2023 [1] GROMMET  
  1K-6853 [1] FITTING  
  0S-1571 [2] BOLT (1.75" LONG)  
  3B-4506 [2] LOCKWASHER  
  1D-4647 [4] BOLT  
  2J-3507 [4] NUT  
  9M-2828 [4] WASHER  
  0S-1571 [10] BOLT  
  3B-4506 [10] LOCKWASHER  
  6M-1601 [1] RETAINER  
  9M-6098 [1] GASKET  
 

#SEBP10370288
 

1S-1938: REAR AXLE HOUSING AND TRUNNION

REAR AXLE HOUSING AND TRUNNION (1S1938 N/S)--Part 2 of 2
Serial No. 36H1139 to 36H1355 inclusive
c110710 SEBP1037
1S1938 REAR AXLE HOUSING AND TRUNNION Parts scheme
  For full view, you need register

Parts for your 824B WHEEL DOZER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  2D-6533 [1] SEAL  
  2A-1538 [12] BOLT  
  4D-3703 [12] WASHER  
  6M-1560 [1] SUPPORT  
  6M-1592 [1] BEARING  
  5S-0086 [1] PLATE  
  5S-0085 [2] BEARING  
  1K-6853 [1] FITTING  
  1D-4585 [12] BOLT  
  9H-1024 [12] WASHER  
  6M-1588 [1] TUBE  
  5M-7423 [1] SEAL  
  0S-1585 [2] BOLT  
  3B-4508 [2] LOCKWASHER  
  2J-1800 [1] GASKET  
  6M-1590 [1] COVER  
  5M-7423 [1] SEAL  
  1A-1135 [12] BOLT  
  3B-4510 [12] LOCKWASHER  
  9M-4216 [1] GASKET  
  9M-6097 [1] SEAL  
  7K-8933 [1] COVER  
  3K-2434 [1] PLUG  
  5B-3265 [1] GASKET  
  8M-3837 [1] PLUG  
  5B-3265 [1] GASKET  
  8S-2150 [1] HOUSING ASSEM.  
  3B-2225 [1] DOWEL  
    (PART OF HOUSING ASSEM. 8S2150)
  6M-1592 [1] BEARING  
  9M-6097 [1] SEAL  
  7K-4343 [1] SUPPORT  
  9M-6097 [1] SEAL  
 

#SEBP10370289
 

1S-1938: REAR AXLE HOUSING AND TRUNNION GROUP

1S1938 REAR AXLE HOUSING AND TRUNNION GROUP--Part 1 of 2
Serial No. 36H1356 to 36H1793 inclusive
c205187 SEBP1037
1S1938 REAR AXLE HOUSING AND TRUNNION GROUP Parts scheme
  For full view, you need register

Parts for your 824B WHEEL DOZER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  4H-6112 [1] BREATHER  
  1J-1759 [1] PLUG  
  5B-3265 [1] GASKET  
  2H-3855 C [1] BOLT  
  3B-4508 C [1] LOCKWASHER  
  4B-4280 C [1] WASHER  
  1L-8181 [1] CLIP  
  6M-1608 [1] TUBE ASSEM.  
  1V-9996 C [1] TUBE  
  9S-1350 [2] CLIP  
  3D-2023 [2] GROMMET  
  0T-0102 [1] BOLT  
  3B-4506 [1] LOCKWASHER  
  3B-8998 [1] FITTING  
  1F-1344 [1] NUT  
    (PART OF FITTING 3B8998)
  0T-0102 [1] BOLT  
  3B-4506 [1] LOCKWASHER  
  1D-4647 [8] BOLT  
  2J-3507 [8] NUT  
  9M-2828 [8] WASHER  
  7H-7055 [1] CLIP  
  3D-2023 [1] GROMMET  
  6M-1622 [2] DOWEL  
  8S-0003 [2] TUBE ASSEM  
  3F-1547 [2] SEAL  
    (7484 INSIDE DIAMETER)
  8F-4469 [2] SEAL  
    (5382 INSIDE DIAMETER)
  1V-9816 C [1] STRIP  
  0S-0509 C [1] BOLT  
  3B-4506 [1] LOCKWASHER  
  3B-8489 C [2] FITTING  
  1V-9995 C [1] TUBE  
  0T-0102 [1] BOLT  
  3B-4506 [1] LOCKWASHER  
  7H-7055 [1] CLIP  
  3D-2023 [1] GROMMET  
  3B-8998 [1] FITTING  
  1F-1344 [1] NUT  
    (PART OF FITTING 3B8998)
  0T-0102 [1] BOLT  
  3B-4506 [1] LOCKWASHER  
  9S-1350 [1] CLIP  
  3D-2023 [1] GROMMET  
  1K-6853 [1] FITTING  
  0S-1571 [2] BOLT (175" LONG)  
  3B-4506 [2] LOCKWASHER  
  1D-4647 [4] BOLT  
  2J-3507 [4] NUT  
  9M-2828 [4] WASHER  
  0S-1571 [10] BOLT  
  3B-4506 [10] LOCKWASHER  
  6M-1601 [1] RETAINER  
  9M-6098 [1] GASKET  
  C   INDICATES CHANGE
 

Information:

Special Instruction
Assembly and Installation of Conventional Duo-Cone Seals{7561, 7561}
Assembly and Installation of Conventional Duo-Cone Seals{7561, 7561}
Tool and Specification Chart for Conventional Duo-Cone Seal Groups {0599, 7561}
Tool and Specification Chart for Conventional Duo-Cone Seal Groups {0599, 7561}
Installation of Conventional Duo-Cone Seals{7561}
Installation of Conventional Duo-Cone Seals{7561}
Installation of Inverted Duo-Cone Seals{7561}
Installation of Inverted Duo-Cone Seals{7561}
Specifications
Final Drive, Wheels, Brakes And Axles<BR> (824, 825, 834, 835)
824 & 834 TRACTORS, 825, 826 & 835 COMPACTORS POWER TRAIN
Final Drive, Wheels, Brakes And Axles<BR> (826)
824 & 834 TRACTORS, 825, 826 & 835 COMPACTORS POWER TRAIN
Trunnion And Axle
824 & 834 TRACTORS, 825, 826 & 835 COMPACTORS POWER TRAIN
Reuse And Salvage Guidelines
Planetary Final Drives for Wheel Loaders, Wheel Tractors, Compactors, Underground Articulated Trucks {4011, 4050, 4051}
Planetary Final Drives for Wheel Loaders, Wheel Tractors, Compactors, Underground Articulated Trucks {4011, 4050, 4051}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Thermal Spray Procedures for Wheel Loader Trunnion Support {0679, 3260, 3268}
Thermal Spray Procedures for Wheel Loader Trunnion Support {0679, 3260, 3268}
Thermal Spray Procedures for Wheel Dozer and Integrated Toolcarrier Axle Housing {0679, 3260}
Thermal Spray Procedures for Wheel Dozer and Integrated Toolcarrier Axle Housing {0679, 3260}
Thermal Spray Procedures for IT And Wheel Dozer Spindle {0679, 4205}
Thermal Spray Procedures for IT And Wheel Dozer Spindle {0679, 4205}
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Disassembly and Assembly
Axles
824 & 834 WHEEL TRACTORS 825, 826 & 835 COMPACTORS POWER TRA
Planetary Carrier Assemblies
824 & 834 WHEEL TRACTORS 825, 826 & 835 COMPACTORS POWER TRA
Final Drive Ring Gears and Hubs
824 & 834 WHEEL TRACTORS 825, 826 & 835 COMPACTORS POWER TRA
824-825 Final Drive Ring Gears and Hubs
824 & 834 WHEEL TRACTORS 825, 826 & 835 COMPACTORS POWER TRA
834-835 Final Drive Ring Gears And Hub
824 & 834 WHEEL TRACTORS 825, 826 & 835 COMPACTORS POWER TRA
Wheel Bearings And Duo-Cone Seals
824 & 834 WHEEL TRACTORS 825, 826 & 835 COMPACTORS POWER TRA
Brake Drums
824 & 834 WHEEL TRACTORS 825, 826 & 835 COMPACTORS POWER TRA
Spindle Housings
824 & 834 WHEEL TRACTORS 825, 826 & 835 COMPACTORS POWER TRA
Service Magazine
New Recommendations for Selecting the Oil Viscosity for the Differentials and Final Drives {3258, 4011, 4051, 7581}
2001/04/02
Product Information Guide, SEBF1015, "Improving Component Durability" , "Final Drives and Differentials" is now available {3258, 3282, 4050}
2008/12/29

Caterpillar Parts SIS Catalog 824B :

FINAL DRIVE, WHEEL AND BRAKE
5S-4034 FINAL DRIVE, WHEEL AND BRAKE
DIFFERENTIAL AND GEAR GROUP
8K-0054 DIFFERENTIAL AND GEAR GROUP
DIFFERENTIAL AND GEAR GROUP
8K-0054 DIFFERENTIAL AND GEAR GROUP
DIFFERENTIAL AND BEVEL GEAR GROUP
9K-0136 DIFFERENTIAL AND BEVEL GEAR GROUP
DIFFERENTIAL AND GEAR GROUP
8K-0034 DIFFERENTIAL AND GEAR GROUP
REAR DIFFERENTIAL AND BEVEL GEAR
8K-0056 REAR DIFFERENTIAL AND BEVEL GEAR
FRONT DIFFERENTIAL AND BEVEL GEAR
8K-0055 FRONT DIFFERENTIAL AND BEVEL GEAR
SLIP JOINT GROUP
1V-4490 SLIP JOINT GROUP
FINAL DRIVE, WHEEL AND BRAKE
5S-4034 FINAL DRIVE, WHEEL AND BRAKE
WHEEL BRAKE
3K-0061 WHEEL BRAKE
WHEEL BRAKE
1V-9229 WHEEL BRAKE
FRONT AXLE HOUSING
3K-9596 FRONT AXLE HOUSING
FRONT AXLE HOUSING GROUP
9K-5656 FRONT AXLE HOUSING GROUP
FRONT AXLE HOUSING GROUP
9K-5656 FRONT AXLE HOUSING GROUP
REAR AXLE HOUSING AND TRUNNION
1S-1938 REAR AXLE HOUSING AND TRUNNION
REAR AXLE HOUSING AND TRUNNION
1S-1938 REAR AXLE HOUSING AND TRUNNION

Truck sale:

 
 
CAT 824B

BLOUNT PARTS & EQUIPMENT
 
 
CAT 824B

BLOUNT PARTS & EQUIPMENT
1969 CAT 824B
USD $19,000 
1969 CAT 824B

Compass Equipment
Atlanta, Georgia
CAT 824B
 
CAT 824B

TRB Equipment Company
Hacienda Heights, California
 
 
CAT 824B

WESTERN CONSTRUCTION AUCTIONS
Perris, California
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.