AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

2N908 FUEL INJECTION VALVES AND LINES GROUP--Part 3 of 3 Serial No. 36J2667 to 36J2822 inclusive D348


FUEL SYSTEM
LINES GP-FUEL
CONTROL GP-FUEL RATIO

INDUSTRIAL ENGINE D348 INDUSTRIAL ENGINE 36J
 D348 ENGINE 36J00561-UP SEBP1040 D348 36J   (1968)

FUEL SYSTEM

LINES GP-FUEL
INJECTION GP-FUEL
2N-0908 INJECTION GP-FUEL
INJECTION GP-FUEL
2N-0908 INJECTION GP-FUEL
INJECTION GP-FUEL
2N-0908 INJECTION GP-FUEL
INJECTION GP-FUEL
2N-0908 INJECTION GP-FUEL
INJECTION GP-FUEL
2N-0908 INJECTION GP-FUEL
INJECTION GP-FUEL
2N-0908 INJECTION GP-FUEL
 

#SEBP10400410
 

2N-0908: INJECTION GP-FUEL

2N908 FUEL INJECTION VALVES AND LINES GROUP--Part 3 of 3
Serial No. 36J2667 to 36J2822 inclusive
c172240 SEBP1040
2N0908 INJECTION GP-FUEL Parts scheme
  For full view, you need register

Parts for your D348 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4S-7797 [1] BOLT  
2. 3B-4508 [7] LOCKWASHER  
3. 8S-0205 [2] BRACKET  
4. 1B-3573 [2] BOLT  
5. 7N-9353 C [2] GASKET  
6. 0S-1594 [2] BOLT  
7. 5M-2894 [12] WASHER  
8. 5M-6213 C [3] PLUG  
9. 0S-1571 [2] BOLT 4.44 cm(1.75 in.) long  
10. 5M-6214 [1] PLUG  
11. 7L-5929 [1] ELBOW  
  7B-7129 [1] GASKET  
12. 7L-6324 [1] TUBE  
13. 2B-2695 [8] BOLT  
14. 3B-4505 [4] LOCKWASHER  
15. 2N-0797 [1] COVER  
16. 7L-7735 [1] GASKET  
17. 2N-6337 [1] ADAPTER  
18. 9H-4557 [2] SEAL  
19. 1A-0168 [3] BOLT  
20. 0S-1588 [2] BOLT  
21. 2N-4973 [1] GEAR (8 teeth)  
  8M-2944 [1] DOWEL  
22. 0S-1617 [2] BOLT  
  4S-5659 [1] LOCK  
23. 0L-1352 [2] BOLT  
24. 0S-1591 [4] BOLT 3.81 cm(1.50 in.) long  
25. 2H-4546 [1] GASKET  
26. 8M-9307 [1] PLUG  
  6F-7062 [1] GASKET  
27. 2A-5220 [1] PLUG  
  2A-5222 [2] GASKET  
28. 4B-4277 [4] WASHER  
29. 2S-7270 [1] GASKET  
30. 3N-0736 [1] LEVER ASSEM.  
  7L-7814 [1] LEVER  
31. 7L-0537 [1] PIN  
32. 8L-5971 [1] HUB  
33. 3N-0737 [1] COVER ASSEM.  
1. 8H-9208 [1] DOWEL  
34. 3D-9348 [1] BOLT  
  9F-7283 H [1] SEAL (large)  
  1S-7104 H [1] SEAL (small)  
  C   INDICATES CHANGE
  H   NOT SHOWN-MOUNTED ON GOVERNOR
 

#SEBP10400411
 

2N-0908: INJECTION GP-FUEL

2N908 FUEL INJECTION VALVES AND LINES GROUP--Part 1 of 3--Type 1
Serial No. 36J2823-Up
c224186 SEBP1040
2N0908 INJECTION GP-FUEL Parts scheme
  For full view, you need register

Parts for your D348 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2P-9574 [1] LINE ASSEM. (No. 12)  
2. 2S-4510 [1] LINE ASSEM. (No. 10)  
3. 2B-2695 [12] BOLT  
4. 2A-5328 [12] LOCK  
5. 0S-1615 [2] BOLT  
  3B-4504 [2] LOCKWASHER  
6. 8S-8814 [2] CLAMP (tapped)  
  8S-8815 [2] CLAMP  
7. 8S-8817 [14] DAMPER  
8. 2S-4508 [1] LINE ASSEM. (No. 8)  
9. 6N-6146 [12] LINE ASSEM.  
10. 8S-8819 [2] CLIP  
11. 2S-4506 [1] LINE ASSEM. (No. 6)  
12. 8S-8820 [4] CLIP  
13. 7N-1984 [1] LINE ASSEM. (No. 4)  
14. 6N-9599 [12] ADAPTER ASSEM.  
15. 2M-4453 [24] SEAL  
16. 5B-2638 [2] BOLT  
17. 5M-2894 [12] WASHER  
18. 4B-4278 [10] WASHER  
19. 9S-1999 [2] BRACKET  
20. 0S-0509 [2] BOLT  
21. 7N-1982 [1] LINE ASSEM. (No. 2)  
22. 6N-6151 [12] NUT  
23. 6N-6150 [12] BODY  
24. 7N-5005 [12] NOZZLE ASSEM.  
25. 3B-1915 [8] BOLT  
26. 5K-9243 [1] ELBOW  
27. 1A-4784 [1] WASHER  
28. 4N-4003 [1] TUBE ASSEM  
29. 6L-3616 [1] CONNECTOR  
30. 9S-1350 [1] CLIP  
31. 1H-1023 [24] SEAL  
32. 1H-8171 [12] SEAL  
33. 5P-6011 H TUBE 3.1 m(120 in.)  
    (Use as Required)
34. 7B-1597 [1] CLIP  
35. 7H-7055 [2] CLIP  
36. 5P-6869 [6] TEE  
  H   ORDER BY THE METER
 

#SEBP10400412
 

2N-0908: INJECTION GP-FUEL

2N908 FUEL INJECTION VALVES AND LINES GROUP--Part 2 of 3--Type 1
Serial No. 36J2823-Up
c224187 SEBP1040
2N0908 INJECTION GP-FUEL Parts scheme
  For full view, you need register

Parts for your D348 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5P-1198 H TUBE (fuel tank) 57 cm(22.43 in.)  
2. 2B-2404 [1] CLIP  
3. 3B-8995 [1] FITTING  
4. 1F-1344 [1] NUT  
5. 001-7043 C [1] ELBOW  
6. 3R-5387 C [1] CONNECTOR  
7. 0S-1595 [6] BOLT  
8. 2N-3194 [1] BRACKET  
9. [1] HOSE ASSEM. 33.02 cm(13 in.)  
10. 0S-1594 [6] BOLT  
11. 5M-2894 [8] WASHER  
12. 4F-5639 [1] GASKET  
13. 7N-9372 CH [1] TUBE ASSEM.  
14. 5S-1445 [1] BRACKET  
15. 2D-6005 [4] WASHER  
16. 1D-4717 [4] NUT  
17. 8M-2770 [2] CLIP  
18. 2N-1018 [1] TUBE ASSEM.  
19. 5P-8245 [4] WASHER  
20. 1N-8020 [1] BRACKET  
21. 0S-1588 [2] BOLT  
22. 7N-1981 [1] LINE ASSEM. (no.1)  
23. 7N-1983 [1] LINE ASSEM. (no.3)  
24. 2S-4505 [1] LINE ASSEM. (no.5)  
25. 2S-4507 [1] LINE ASSEM. (no.7)  
26. 2S-4509 [1] LINE ASSEM. (no. 9)  
27. 5B-1585 [1] FITTING  
28. 5S-0552 [1] BRACKET  
29. 2S-4511 [1] LINE ASSEM. (no. 11)  
30. 6H-1995 [1] SEAL  
31. 0S-1571 [2] BOLT  
32. 5H-3124 [2] SPACER  
33. 4L-8546 [1] VALVE  
  044-4101 [1] COUPLING  
  3B-7272 [1] NIPPLE  
  C   INDICATES CHANGE
  H   ORDER BY THE CENTIMETER
 

#SEBP10400413
 

2N-0908: INJECTION GP-FUEL

2N908 FUEL INJECTION VALVES AND LINES GROUP--Part 3 of 3--Type 1
Serial No. 36J2823-Up
c224188 SEBP1040
2N0908 INJECTION GP-FUEL Parts scheme
  For full view, you need register

Parts for your D348 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4S-7797 [1] BOLT  
2. 3B-4508 [7] LOCKWASHER  
3. 8S-0205 [2] BRACKET  
4. 1B-3573 [2] BOLT  
5. 7N-9353 [2] GASKET  
6. 0S-1594 [2] BOLT  
7. 5M-2894 [12] WASHER  
8. 5M-6213 [3] PLUG  
9. 0S-1571 [2] BOLT 4.44 cm(1.75 in.) long  
10. 5M-6214 [1] PLUG  
11. 7L-5929 [1] ELBOW  
  7B-7129 [1] GASKET  
12. 7L-6324 [1] TUBE  
13. 2B-2695 [8] BOLT  
14. 3B-4505 [4] LOCKWASHER  
15. 2N-0797 [1] COVER  
16. 7L-7735 [1] GASKET  
17. 2N-6337 [1] ADAPTER  
18. 9H-4557 [2] SEAL  
19. 1A-0168 [3] BOLT  
20. 0S-1588 [2] BOLT  
21. 2N-4973 [1] GEAR (8 teeth)  
  8M-2944 [1] DOWEL  
22. 0S-1617 [2] BOLT  
  4S-5659 [1] LOCK  
23. 0L-1352 [2] BOLT  
24. 0S-1591 [4] BOLT 3.81 cm(1.50 in.) long  
25. 2H-4546 [1] GASKET  
26. 8M-9307 [1] PLUG  
  6F-7062 [1] GASKET  
27. 2A-5220 [1] PLUG  
  2A-5222 [2] GASKET  
28. 4B-4277 [4] WASHER  
29. 2S-7270 [1] GASKET  
30. 3N-0736 [1] LEVER ASSEM.  
  7L-7814 [1] LEVER  
31. 7L-0537 [1] PIN  
32. 8L-5971 [1] HUB  
33. 3N-0737 [1] COVER ASSEM.  
  8H-9208 [1] DOWEL  
34. 3D-9348 [1] BOLT  
  9F-7283 H [1] SEAL (large)  
  1S-7104 H [1] SEAL (small)  
  H   NOT SHOWN-MOUNTED ON GOVERNOR
 

#SEBP10400414
 

2N-0908: INJECTION GP-FUEL

2N908 FUEL INJECTION VALVES AND LINES GROUP--Part 1 of 3--Type 2
Serial No. 36J2823-Up
c224186 SEBP1040
2N0908 INJECTION GP-FUEL Parts scheme
  For full view, you need register

Parts for your D348 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2P-9574 [1] LINE ASSEM. (No. 12)  
2. 2S-4510 [1] LINE ASSEM. (No. 10)  
3. 2B-2695 [12] BOLT  
4. 2A-5328 [12] LOCK  
5. 0S-1615 [2] BOLT  
  3B-4504 [2] LOCKWASHER  
6. 8S-8814 [2] CLAMP (tapped)  
  8S-8815 [2] CLAMP  
7. 8S-8817 [14] DAMPER  
8. 2S-4508 [1] LINE ASSEM. (No. 8)  
9. 6N-6146 [12] LINE ASSEM.  
10. 8S-8819 [2] CLIP  
11. 2S-4506 [1] LINE ASSEM. (No. 6)  
12. 8S-8820 [4] CLIP  
13. 7N-1984 [1] LINE ASSEM. (No. 4)  
14. 6N-9599 [12] ADAPTER ASSEM.  
15. 2M-4453 [24] SEAL  
16. 5B-2638 [2] BOLT  
17. 5M-2894 [12] WASHER  
18. 4B-4278 [10] WASHER  
19. 9S-1999 [2] BRACKET  
20. 0S-0509 [2] BOLT  
21. 7N-1982 [1] LINE ASSEM. (No. 2)  
22. 6N-6151 [12] NUT  
23. 6N-6150 [12] BODY  
24. 7N-5005 [12] NOZZLE ASSEM.  
25. 3B-1915 [8] BOLT  
26. 5K-9243 [1] ELBOW  
27. 1A-4784 [1] WASHER  
28. 4N-4003 [1] TUBE ASSEM  
29. 6L-3616 [1] CONNECTOR  
30. 9S-1350 [1] CLIP  
31. 1H-1023 [24] SEAL  
32. 1H-8171 [12] SEAL  
33. 5P-6011 H TUBE 3.1 m(120 in.)  
    (Use as Required)
34. 7B-1597 [1] CLIP  
35. 7H-7055 [2] CLIP  
36. 5P-6869 [6] TEE  
  H   ORDER BY THE METER
 

#SEBP10400415
 

2N-0908: INJECTION GP-FUEL

2N908 FUEL INJECTION VALVES AND LINES GROUP--Part 2 of 3--Type 2
Serial No. 36J2823-Up
c178192 SEBP1040
2N0908 INJECTION GP-FUEL Parts scheme
  For full view, you need register

Parts for your D348 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5P-1198 H TUBE (fuel tank) 57 cm(22.43 in.)  
2. 2B-2404 [1] CLIP  
3. 3B-8995 [1] FITTING  
4. 1F-1344 [1] NUT  
5. 001-7043 [1] ELBOW  
6. 3R-5387 [1] CONNECTOR  
7. 0S-1595 [6] BOLT  
8. 2N-3194 [1] BRACKET  
9. 6N-8227 [1] HOSE ASSEM. 33.02 cm (13 in.)  
10. 0S-1594 [6] BOLT  
11. 5M-2894 [8] WASHER  
12. 4F-5639 [1] GASKET  
13. 7N-9372 H [1] TUBE ASSEM.  
14. 5S-1445 [1] BRACKET  
15. 2D-6005 [4] WASHER  
16. 1D-4717 [4] NUT  
17. 8M-2770 [2] CLIP  
18. 2N-1018 [1] TUBE ASSEM.  
19. 5P-8245 [4] WASHER  
20. 1N-8020 [1] BRACKET  
21. 0S-1588 [2] BOLT  
22. 7N-1981 [1] LINE ASSEM. (no. 1)  
23. 7N-1983 [1] LINE ASSEM. (no. 3)  
24. 2S-4505 [1] LINE ASSEM. (no. 5)  
25. 2S-4507 [1] LINE ASSEM. (no. 7)  
26. 2S-4509 [1] LINE ASSEM. (no. 9)  
27. 5B-1585 [1] FITTING  
28. 5S-0552 [1] BRACKET  
29. 2S-4511 [1] LINE ASSEM. (no. 11)  
30. 6H-1995 [1] SEAL  
31. 0S-1571 [2] BOLT  
32. 5H-3124 [2] SPACER  
33. 4L-8546 [1] VALVE  
  044-4101 [1] COUPLING  
  3B-7272 [1] NIPPLE  
  H   ORDER BY THE CENTIMETER
 

#SEBP10400416
 

2N-0908: INJECTION GP-FUEL

2N908 FUEL INJECTION VALVES AND LINES GROUP--Part 3 of 3--Type 2
Serial No. 36J2823-Up
c178193 SEBP1040
2N0908 INJECTION GP-FUEL Parts scheme
  For full view, you need register

Parts for your D348 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4S-7797 [1] BOLT  
2. 3B-4508 [7] LOCKWASHER  
3. 8S-0205 [2] BRACKET  
4. 1B-3573 [2] BOLT  
5. 7N-9353 [2] GASKET  
6. 0S-1594 [2] BOLT  
7. 5M-2894 [12] WASHER  
8. 5M-6213 [3] PLUG  
9. 0S-1571 [2] BOLT 4.44 cm(1.75 in.) long  
10. 5M-6214 [1] PLUG  
11. 7L-5929 [1] ELBOW  
  7B-7129 [1] GASKET  
12. 7L-6324 [1] TUBE  
13. 2B-2695 C [4] BOLT  
14. 3B-4505 [4] LOCKWASHER  
15. 2N-0797 [1] COVER  
16. 7L-7735 [1] GASKET  
17. 2N-6337 [1] ADAPTER  
18. 9H-4557 [2] SEAL  
19. 1A-0168 [3] BOLT  
20. 0S-1588 [2] BOLT  
21. 2N-4973 [1] GEAR (8 teeth)  
  8M-2944 [1] DOWEL  
22. 0S-1617 [2] BOLT  
  4S-5659 [1] LOCK  
23. 0L-1352 [2] BOLT  
24. 0S-1591 [4] BOLT 3.81 cm(1.50 in.) long  
25. 2H-4546 [1] GASKET  
26. 8M-9307 [1] PLUG  
  6F-7062 [1] GASKET  
27. 3D-9348 [1] BOLT  
  9F-7283 H [1] SEAL (large)  
  1S-7104 H [1] SEAL (small)  
  C   INDICATES CHANGE
  H   NOT SHOWN-MOUNTED ON GOVERNOR
 

#SEBP10400417
 

8S-6419: CONTROL GP-FUEL RATIO

8S6419 FUEL RATIO CONTROL GROUP
Serial No. 36J561 to 36J1035 inclusive
c111246 SEBP1040
8S6419 CONTROL GP-FUEL RATIO Parts scheme
  For full view, you need register

Parts for your D348 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1B-2714 [3] BOLT  
2. 3S-4780 [1] COVER  
3. 3S-4818 [1] SPRING  
4. 3S-4819 [1] GASKET  
5. 6L-5766 [1] GASKET  
6. 6L-5768 [1] SPRING  
7. 6L-5769 [1] WASHER  
8. 6L-5767 [1] COVER  
9. 5S-6120 [1] RETAINER ASSEM.  
10. 6L-5773 [1] GASKET  
11. 6L-5772 [1] SPRING  
12. 8L-4183 [1] BOLT  
13. 3D-4603 [2] PLUG  
14. 5S-6458 [1] DOWEL  
15. 2M-5471 [1] BOLT  
16. 3S-4082 [1] PIN  
17. 1P-7963 [1] ARM  
18. 4F-7957 [2] BOLT  
19. 3S-4864 [2] SPACER  
20. 1B-2713 [1] BOLT  
21. 2M-2489 [1] SEAL  
22. 3S-4742 [1] SPRING  
23. 1B-4202 [1] NUT  
24. 3S-4741 [1] SCREW  
25. 8S-5447 [1] HOUSING ASSEM.  
  8S-5448 [1] BEARING  
    (Part of 8S5447 Housing Assem.)
26. 4S-7458 [1] DIAPHRAGM  
27. 6L-6035 [1] DOWEL  
  3S-4556 [1] LEVER ASSEM.  
28. 3S-4546 [1] LEVER  
29. 3S-4555 [1] SHAFT  
  3H-6660 [1] PIN  
30. 3S-4820 [1] PLUNGER  
31. 3S-4499 [1] HOUSING  
 

#SEBP10400418
 

2P-9625: CONTROL GP-FUEL RATIO

2P9625 FUEL RATIO CONTROL GROUP
Serial No. 36J1036 to 36J1231 inclusive
c150009 SEBP1040
2P9625 CONTROL GP-FUEL RATIO Parts scheme
  For full view, you need register

Parts for your D348 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6L-5766 [1] GASKET  
2. 2P-8875 [1] RETAINER ASSEM.  
3. 6N-0513 C [1] SPRING  
4. 6N-0515 C [1] SPRING  
5. 6N-0514 C [1] SPRING  
6. 2P-8643 [1] GASKET  
7. 2P-8234 [1] SEAL  
8. 5K-0227 C [1] SEAL  
9. 2P-8225 [1] HOUSING  
10. 2P-8802 [1] VALVE ASSEM.  
11. 2P-8801 [1] RETAINER  
12. 2P-8804 [1] DIAPHRAGM  
13. 2P-8803 [1] WASHER  
14. 6L-2376 [2] BOLT 2.86 cm(1.125 in.) long  
  4N-8112 C [2] BOLT 8.26 cm(3.250 in.) long  
  9M-1974 C [4] WASHER  
15. 2P-8226 [1] COVER  
16. 2P-8882 [1] COVER  
17. 2P-8939 [1] VALVE  
18. 4N-3808 [1] PIN  
19. 4J-2506 [1] SEAL  
20. 2N-5919 C [3] BOLT  
  5P-0537 [3] WASHER  
  C   INDICATES CHANGE
 

#SEBP10400419
 

2P-9625: CONTROL GP-FUEL RATIO

2P9625 FUEL RATIO CONTROL GROUP
Serial No. 36J1232 to 36J1434 inclusive
c154257 SEBP1040
2P9625 CONTROL GP-FUEL RATIO Parts scheme
  For full view, you need register

Parts for your D348 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6L-5766 [1] GASKET  
2. 2P-8875 [1] RETAINER ASSEM.  
3. 6N-0513 [1] SPRING  
4. 6N-0515 [1] SPRING  
5. 6N-0514 [1] SPRING  
6. 2P-8643 [1] GASKET  
7. 2P-8234 [1] SEAL  
8. 5K-0227 [1] SEAL  
9. 2P-8225 [1] HOUSING  
10. 2P-8802 [1] VALVE ASSEM.  
11. 2P-8801 [1] RETAINER  
12. 2P-8804 [1] DIAPHRAGM  
13. 2P-8803 [1] WASHER  
14. 6L-2376 [2] BOLT 2.86 cm(1.125 in.) long  
  4N-8112 [2] BOLT 8.26 cm(3.250 in.) long  
  9M-1974 [4] WASHER  
15. 2P-8226 [1] COVER  
16. 2P-8882 [1] COVER  
17. 2P-8939 [1] VALVE  
18. 9F-7882 C [1] PIN  
19. 4J-2506 [1] SEAL  
20. 2N-5919 C [3] BOLT  
  5P-0537 [3] WASHER  
21. 5P-0423 CH WIRE 4 dm(1.01 in.)  
  8S-8158 [1] SEAL  
  C   INDICATES CHANGE
  H   ORDER BY THE DECIMETRE
 

Information:

Engine News
8N1831 Fuel Nozzle Assembly Now Approved For Use In 1693 Truck Engine; Chart For Applications Of 8N1831 And 7N5005 Fuel Nozzle Assemblies
1980/01/23
Inspect All Engine Oil And Fuel Filter Elements Before Installation
1980/11/12
New Fuel Nozzle Test Sheet Available
1982/10/20
Bulged Capsule-Type Fuel Nozzles
1982/10/20
Do Not Use A Wire Brush On Fuel Nozzles
1982/10/20
Service Parts Available For The 5P4150 Nozzle Testing Group
1982/12/15
Bleed Screw Washer (Seal) Must Be Replaced If Bleed Screw Removed From Fuel Nozzle
1986/04/01
New Adjustment Pin And Valve Seal Used In Fuel Ratio Control
1977/08/24
Modification Of Drive Adapter For Fuel Injection Test Bench
1978/05/24
Special Instruction
Fuel System and Fuel Ratio Control Test Procedure{1264, 1278}
Fuel System and Fuel Ratio Control Test Procedure{1264, 1278}
Creating Fuel Pump, and Fuel Nozzle Reference Parts for Checking Fuel Pump Test Stands and Nozzle Pop Testers{1254}
Creating Fuel Pump, and Fuel Nozzle Reference Parts for Checking Fuel Pump Test Stands and Nozzle Pop Testers{1254}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
Disassembly and Assembly
Fuel Transfer Pump (Later Engine)
D348 INDUSTRIAL & MARINE ENGINES
Fuel Injection Lines
D348 INDUSTRIAL & MARINE ENGINES
Fuel Injection Valves
D348 INDUSTRIAL & MARINE ENGINES
Fuel Injection Valve, Precombustion Chambers, Glow Plugs
D348 INDUSTRIAL & MARINE ENGINES
Fuel Ratio Control
D348 INDUSTRIAL & MARINE ENGINES
Fuel Ratio Control With Override
D348 INDUSTRIAL & MARINE ENGINES
Service Magazine
Improvements To Optional Modification Of 5P4150 Nozzle Tester{0651,1254}
1981/08/17
New Diaphragm Used In Fuel Ratio Control{1278}
1982/03/15
New 6V4950 Injection Line Speed Pickup Group Used With 6V2100 Multitach{0651}
1982/05/03
Do Not Use A Wire Brush On Fuel Nozzles{1254}
1982/09/27
New Fuel Nozzle Test Sheet Available{0651,1254}
1982/10/04
Bulged Capsule-Type Fuel Nozzles{1254}
1982/10/11
Service Parts Available For The 5P4150 Nozzle Testing Group{0651,0652}
1982/11/22
Improvements Made To Fuel Ratio Control {1278}
1982/11/29
Information For Repair Of Hydraulic Fuel Ratio Controls{1278}
1983/08/15
Remanufactured Air Fuel Ratio Controls {1278,7754}
1985/01/14
Bleed Screw Washer (Seal) Must Be Replaced If Bleed Screw Removed From Fuel Nozzle{1254}
1986/04/07
Correct Position Of The Bleed Hole In The Fuel Line Adapter{1252}
1986/04/21
Test Used Fuel Nozzles Before You Install New Nozzles; Tips On Test Procedures{1254,0651,0336}
1977/02/14
New Spring Used In Fuel Ratio Control{1278}
1977/03/21
New Adjustment Pin And Valve Seal Used In Fuel Ratio Control{1278}
1977/07/11
With New 5P7448 Adapter, Earlier Fuel Injection Valves And Nozzles Can Be Tested And Adjusted On The 5P4150 Nozzle Testing Group{0651,1254}
1977/10/31
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
Modification Of Drive Adapter For Fuel Injection Test Bench{0650,1272}
1978/05/22
New Drive Adapters For Fuel Injection Test Bench{0650}
1978/09/11
New 1U9139 Universal Fuel Line Pickup Available{0775}
1988/05/23
New Larger Capacity Water Separator Is Available{1250}
1979/03/12
Careful, Correct Installation And Maintenance Of Fuel Injection Lines Is Very Important To Prevent Possible Engine Damage, Fire And Other Problems{1252}
1979/04/23
General Information -- Diesel Fuels In Cold Temperature Operation{1280}
1979/12/17

Caterpillar Parts SIS Catalog D348 :

INJECTION GP-FUEL
2N-0908 INJECTION GP-FUEL
INJECTION GP-FUEL
2N-0908 INJECTION GP-FUEL
INJECTION GP-FUEL
2N-0908 INJECTION GP-FUEL
INJECTION GP-FUEL
2N-0908 INJECTION GP-FUEL
INJECTION GP-FUEL
2N-0908 INJECTION GP-FUEL
INJECTION GP-FUEL
2N-0908 INJECTION GP-FUEL
INJECTION GP-FUEL
2N-0908 INJECTION GP-FUEL
INJECTION GP-FUEL
2N-0908 INJECTION GP-FUEL
INJECTION GP-FUEL
2N-0908 INJECTION GP-FUEL
INJECTION GP-FUEL
2N-0908 INJECTION GP-FUEL
INJECTION GP-FUEL
2N-0908 INJECTION GP-FUEL
INJECTION GP-FUEL
2N-0908 INJECTION GP-FUEL
INJECTION GP-FUEL
2N-0908 INJECTION GP-FUEL
INJECTION GP-FUEL
2N-0908 INJECTION GP-FUEL
CONTROL GP-FUEL RATIO
8S-6419 CONTROL GP-FUEL RATIO
CONTROL GP-FUEL RATIO
2P-9625 CONTROL GP-FUEL RATIO

Truck sale:

1972 CAT D348
USD $13,500 
1972 CAT D348

Hawthorne Cat
San Marcos, California
 
 
CAT D348

EURO AUCTIONS
United Kingdom
 
 
CAT D348

Yoder & Frey Auctioneers
Ashland, Ohio
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.