AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

4N6712 FUEL PUMP HOUSING GROUP--Part 2 of 2--Type 1 Serial No. 38J256-Up D348 MARINE ENGINE


FUEL SYSTEM
PUMP GP-FUEL INJECTION
CONTROL GP-FUEL RATIO

MARINE ENGINE D348 MARINE ENGINE 38J
 D348 MARINE ENGINE 38J00193-UP SEBP1041 D348 38J   (1968)

FUEL SYSTEM

PUMP GP-FUEL INJECTION
FUEL PUMP HOUSING GROUP
9S-8987 FUEL PUMP HOUSING GROUP
PUMP GP-FUEL INJECTION
4N-6712 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
4N-6712 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
4N-6712 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
4N-6712 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
4N-6712 PUMP GP-FUEL INJECTION
 

#SEBP10410350
 

4N-6712: PUMP GP-FUEL INJECTION

4N6712 FUEL PUMP HOUSING GROUP--Part 2 of 2--Type 1
Serial No. 38J256-Up
c148299 SEBP1041
4N6712 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your D348 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9S-2359 [12] LIFTER ASSEM. (1.367" DIM. X)  
  9S-2360 [12] LIFTER ASSEM. (1.371" DIM. X)  
  9S-2361 [12] LIFTER ASSEM. (1.375" DIM. X)  
  9S-2362 [12] LIFTER ASSEM. (1.379" DIM. X)  
  9S-2363 [12] LIFTER ASSEM. (1.383" DIM. X)  
2. 2S-1873 [12] SPRING  
3. 3B-1915 [24] BOLT  
  3B-4506 [24] LOCKWASHER  
4. 3S-1467 [12] PUMP ASSEM.  
5. 2S-4663 [12] SEAL  
    (1 in each 3S1467 Assem.)
6. 2M-4453 [24] SEAL  
    (2 in each 3S1467 Assem.)
7. 2S-1874 [12] WASHER  
8. 8S-2723 [1] RACK  
 

#SEBP10410351
 

4N-6712: PUMP GP-FUEL INJECTION

4N6712 FUEL PUMP HOUSING GROUP--Part 1 of 2--Type 2
Serial No. 38J256-Up
4N6680 Drive parts are shown on Page 194
c178197 SEBP1041
4N6712 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your D348 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8S-2726 [ 1] HOUSING ASSEM.  
    (Includes)
2. 9H-4926 [ 1] FERRULE  
3. 1P-7325 [ 2] BEARING  
4. 4F-6448 [ 1] DOWEL  
5. 2S-8012 [ 1] PIN  
6. 1A-4672 [ 1] PLUG  
7. 8M-8489 [ 12] DOWEL  
8. 0L-2061 [ 2] DOWEL  
9. 5M-6214 [ 1] PLUG  
10. 2S-3145 [ 6] GUIDE  
11. 2S-2055 [ 4] BEARING  
12. 2S-3961 [ 1] SLEEVE  
13. 2S-2039 [ 1] BEARING  
14. 6F-0984 [ 1] DOWEL  
15. 2S-2407 [ 1] GASKET  
16. 0S-1594 [ 2] BOLT  
17. 2A-5222 C [ 2] GASKET  
18. 2S-7502 [ 1] GASKET  
19. 4N-6680 Y [ 1] DRIVE ASSEM.  
20. 2S-2389 [ 1] COVER  
21. 0S-1617 [ 2] BOLT  
  2A-5328 [ 2] LOCK  
22. 4N-6717 [ 1] CAMSHAFT  
23. 2S-2065 [ 1] PLATE  
  7N-1985 [ 2] SHIM  
24. 5S-0595 [ 1] PIN ASSEM.  
25. 2B-2695 [ 10] BOLT  
  9M-1974 [ 10] WASHER  
    SEPARATE ILLUSTRATION
    INDICATES CHANGE
 

#SEBP10410352
 

4N-6712: PUMP GP-FUEL INJECTION

4N6712 FUEL PUMP HOUSING GROUP--Part 2 of 2--Type 2
Serial No. 38J256-Up
c217698 SEBP1041
4N6712 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your D348 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9S-2359 [ 12] LIFTER ASSEM. 3.47 cm(1.367 in.) DIM X  
  9S-2360 [ 12] LIFTER ASSEM. 3.48 cm(1.371 in.) DIM. X  
  9S-2361 [ 12] LIFTER ASSEM. 3.49 cm(1.375 in.) DIM. X  
  9S-2362 [ 12] LIFTER ASSEM. 3.50 cm(1.379 in.) DIM. X  
  9S-2363 [ 12] LIFTER ASSEM. 3.51 cm(1.383 in.) DIM. X  
2. 2M-4453 [ 24] SEAL  
3. 3B-1915 [ 24] BOLT  
4. 3S-1467 [ 12] PUMP GROUP  
    (Each Includes)
5. 2S-1873 [ 1] SPRING  
6. 2S-1874 [ 1] WASHER  
7. 2S-4663 [ 1] SEAL  
8. 8S-2723 [ 1] RACK  
9. 5M-2894 [ 24] WASHER  
 

#SEBP10410353
 

4N-6712: PUMP GP-FUEL INJECTION

4N6712 FUEL INJECTION PUMP GROUP--Part 1 of 2--Type 3
Serial No. 38J256-Up
4N6680 Drive parts are shown on Page 194
c178194 SEBP1041
4N6712 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your D348 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8S-2726 [ 1] HOUSING ASSEM.  
    (Includes)
2. 9H-4926 [ 1] FERRULE  
3. 1P-7325 [ 2] BEARING  
4. 4F-6448 [ 1] DOWEL  
5. 2S-8012 [ 1] PIN  
6. 1A-4672 [ 1] PLUG  
7. 8M-8489 [ 12] DOWEL  
8. 0L-2061 [ 2] DOWEL  
9. 5M-6214 [ 1] PLUG  
10. 2S-3145 [ 6] GUIDE  
11. 2S-2055 [ 4] BEARING  
12. 2S-3961 [ 1] SLEEVE  
13. 2S-2039 [ 1] BEARING  
14. 6F-0984 [ 1] DOWEL  
15. 2S-2407 [ 1] GASKET  
16. 0S-1594 [ 2] BOLT  
17. 2A-5222 C [ 2] GASKET  
18. 2S-7502 [ 1] GASKET  
19. 4N-6680 Y [ 1] DRIVE ASSEM.  
20. 2S-2389 [ 1] COVER  
21. 0S-1617 [ 2] BOLT  
  2A-5328 [ 2] LOCK  
22. 4N-6717 [ 1] CAMSHAFT  
23. 2S-2065 [ 1] PLATE  
  7N-1985 [ 2] SHIM  
24. 5S-0595 [ 1] PIN ASSEM.  
25. 2B-2695 [ 10] BOLT  
  9M-1974 [ 10] WASHER  
26. 3N-0736 C [ 1] LEVER ASSEM.  
    (Includes)
  7L-7814 [ 1] LEVER  
27. 8L-5971 [ 1] HUB  
28. 7L-0537 [ 1] PIN  
29. 7F-0560 C [ 1] BOLT  
  8M-9307 C [ 1] WASHER  
30. 2A-5220 C [ 1] PLUG  
  2A-5222 C [ 1] GASKET  
    SEPARATE ILLUSTRATION
    INDICATES CHANGE
 

#SEBP10410354
 

4N-6712: PUMP GP-FUEL INJECTION

4N6712 FUEL INJECTION PUMP GROUP--Part 2 of 2--Type 3
Serial No. 38J256-Up
c178195 SEBP1041
4N6712 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your D348 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9S-2359 [ 12] LIFTER ASSEM. 3.47 cm(1.367 in.) DIM. X  
  9S-2360 [ 12] LIFTER ASSEM. 3.48 cm(1.371 in.) DIM. X  
  9S-2361 [ 12] LIFTER ASSEM. 3.49 cm(1.375 in.) DIM. X  
  9S-2362 [ 12] LIFTER ASSEM. 3.50 cm(1.379 in.) DIM X  
  9S-2363 [ 12] LIFTER ASSEM. 3.51 cm(1.383 in.) DIM. X  
2. 2M-4453 [ 24] SEAL  
3. 3B-1915 [ 24] BOLT  
4. 3S-1467 [ 12] PUMP GROUP  
    (Each Includes)
5. 2S-1873 [ 1] SPRING  
6. 2S-1874 [ 1] WASHER  
7. 2S-4663 [ 1] SEAL  
8. 8S-2723 [ 1] RACK  
9. 5M-2894 [ 24] WASHER  
10. 3N-0737 C [ 1] COVER ASSEM.  
    (Includes)
  8H-9208 [ 1] DOWEL  
11. 2B-2695 C [ 4] BOLT  
12. 2S-7270 C [ 1] GASKET  
    INDICATES CHANGE
 

#SEBP10410355
 

4S-9498: VARIABLE TIMING DRIVE ASSEMBLY

4S9498 VARIABLE TIMING DRIVE ASSEMBLY--Type 1
Serial No. 38J193 to 38J255 inclusive
Part of 9S8987 Fuel Pump Housing Group shown on Page 188
c206765 SEBP1041
4S9498 VARIABLE TIMING DRIVE ASSEMBLY Parts scheme
  For full view, you need register

Parts for your D348 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4S-9497 [1] SHAFT ASSEM.  
2. 7S-8790 [1] SPRING  
3. 4S-9485 [1] COUPLING  
4. 2S-0978 [1] VALVE  
5. 2S-0987 [2] DOWEL  
6. 4N-5397 C [1] PISTON ASSEM.  
7. 6N-3579 C [1] SPRING  
8. 4S-6904 [2] WEIGHT  
9. 4S-9714 [1] NUT  
10. 5H-4792 [2] PIN  
11. 4S-9487 [1] DOWEL  
12. 4S-9486 [1] RETAINER  
13. 3B-0551 [1] PLUG  
  C   INDICATES CHANGE
 

#SEBP10410356
 

4N-6680: DRIVE AS-VARIABLE TIMING

4N6680 VARIABLE TIMING DRIVE ASSEMBLY
Serial No. 38J256 to 38J469 inclusive
Part of 4N6712 Fuel Pump Housing Group shown on Pages 190 & 192
c206524 SEBP1041
4N6680 DRIVE AS-VARIABLE TIMING Parts scheme
  For full view, you need register

Parts for your D348 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4S-9497 [ 1] SHAFT ASSEM.  
2. 7S-8790 [ 1] SPRING  
3. 4N-6679 [ 1] COUPLING  
4. 2S-0978 C [ 1] VALVE  
5. 2S-0987 [ 2] DOWEL  
6. 4N-5397 [ 1] PISTON ASSEM.  
7. 6N-3578 C [ 1] SPRING  
8. 4S-6904 [ 2] WEIGHT  
9. 4S-9714 [ 1] NUT  
10. 5H-4792 [ 2] PIN  
11. 4S-9487 [ 1] DOWEL  
12. 4S-9486 [ 1] RETAINER  
13. 3B-0551 [ 1] PLUG  
    INDICATES CHANGE
 

#SEBP10410357
 

4S-9398: VARIABLE TIMING DRIVE ASSEMBLY

4S9398 VARIABLE TIMING DRIVE ASSEMBLY--Type 2
Serial No. 38J193 to 38J255 inclusive
Part of 9S8987 Fuel Pump Housing Group shown on Page 188
c176141 SEBP1041
4S9398 VARIABLE TIMING DRIVE ASSEMBLY Parts scheme
  For full view, you need register

Parts for your D348 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8N-3796 C [1] SHAFT ASSEM.  
2. 7S-8790 [1] SPRING  
3. 4S-9485 [1] COUPLING  
4. 2S-0978 [1] VALVE  
5. 2S-0987 [2] DOWEL  
6. 4N-5397 [1] PISTON ASSEM.  
7. 6N-3579 [1] SPRING  
8. 4S-6904 [2] WEIGHT  
9. 4S-9714 [1] NUT  
10. 5H-4792 [2] PIN  
11. 4S-9487 [1] DOWEL  
12. 4S-9486 [1] RETAINER  
13. 9S-9334 C [1] PLUG  
14. 7M-8485 C [1] SEAL  
  C   INDICATES CHANGE
 

#SEBP10410358
 

4N-6680: DRIVE AS-VARIABLE TIMING

4N6680 VARIABLE TIMING DRIVE ASSEMBLY
Serial No. 38J470-Up
Part of 4N6712 Fuel Pump Housing Group shown on Pages 190 and 192
c300882 SEBP1041
4N6680 DRIVE AS-VARIABLE TIMING Parts scheme
  For full view, you need register

Parts for your D348 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8N-3796 C [1] SHAFT ASSEM.  
2. 7S-8790 [1] SPRING  
3. 4N-6679 [1] COUPLING  
4. 2S-0978 [1] VALVE  
5. 2S-0987 [2] DOWEL  
6. 4N-5397 [1] PISTON ASSEM.  
7. 6N-3578 [1] SPRING  
8. 4S-6904 [2] WEIGHT  
9. 4S-9714 [1] NUT  
10. 5H-4792 [2] PIN  
11. 4S-9487 [1] DOWEL  
12. 4S-9486 [1] RETAINER  
13. 9S-9334 C [1] PLUG  
  7M-8485 C [1] SEAL  
  C   INDICATES CHANGE
 

#SEBP10410359
 

8S-6419: CONTROL GP-FUEL RATIO

8S6419 FUEL RATIO CONTROL GROUP--With Override
Serial No. 38J193 to 38J255 inclusive
c111246 SEBP1041
8S6419 CONTROL GP-FUEL RATIO Parts scheme
  For full view, you need register

Parts for your D348 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1B-2714 [3] BOLT  
2. 3S-4780 [1] COVER  
3. 3S-4818 [1] SPRING  
4. 3S-4819 [1] GASKET  
5. 6L-5766 [1] GASKET  
6. 6L-5768 [1] SPRING  
7. 6L-5769 [1] WASHER  
8. 6L-5767 [1] COVER  
9. 5S-6120 [1] RETAINER ASSEM.  
10. 6L-5773 [1] GASKET  
11. 6L-5772 [1] SPRING  
12. 8L-4183 [1] BOLT  
13. 3D-4603 [2] PLUG  
14. 5S-6458 [1] DOWEL  
15. 2M-5471 [1] BOLT  
16. 3S-4082 [1] PIN  
17. 1P-7963 [1] ARM  
18. 4F-7957 [2] BOLT  
19. 3S-4864 [2] SPACER  
20. 1B-2713 [1] BOLT  
21. 2M-2489 [1] SEAL  
22. 3S-4742 [1] SPRING  
23. 1B-4202 [1] NUT  
24. 3S-4741 [1] SCREW  
25. 8S-5447 [1] HOUSING ASSEM.  
  8S-5448 [1] BEARING  
    (Part of 8S5447 Housing Assem.)
26. 4S-7458 [1] DIAPHRAGM  
27. 6L-6035 [1] DOWEL  
  3S-4556 [1] LEVER ASSEM.  
28. 3S-4546 [1] LEVER  
29. 3S-4555 [1] SHAFT  
  3H-6660 [1] PIN  
30. 3S-4820 [1] PLUNGER  
31. 3S-4499 [1] HOUSING  
 

Information:

Engine News
Improved Woodward Governor Groups
1979/01/10
Service Kit Is Available For Woodward UG8 Governor
1979/09/19
8N1831 Fuel Nozzle Assembly Now Approved For Use In 1693 Truck Engine; Chart For Applications Of 8N1831 And 7N5005 Fuel Nozzle Assemblies
1980/01/23
New Plug With Straight-Threads Used In Engine Variable Timing Drive
1980/06/04
Woodward Governor Available For Parallel Generator Applications
1981/04/22
Explanation Of Differences In Timing Advance Information
1981/08/26
New Fuel Nozzle Test Sheet Available
1982/10/20
Bulged Capsule-Type Fuel Nozzles
1982/10/20
Do Not Use A Wire Brush On Fuel Nozzles
1982/10/20
Service Parts Available For The 5P4150 Nozzle Testing Group
1982/12/15
New Governor Drive Gears And Weight Assemblies
1983/09/14
Service Information For Woodward Governors
1983/10/26
Hydramechanical Governor Fuel Setting Information
1985/06/01
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing
1986/03/01
Bleed Screw Washer (Seal) Must Be Replaced If Bleed Screw Removed From Fuel Nozzle
1986/04/01
Update Information For Caterpillar Fuel Injection Equipment Test Stand
1986/07/01
Initial Start Of Engine Using An EGB29P Governor/Actuator After Filling With Oil
1987/05/01
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures
1977/07/13
New Fuel Injection Valve Assembly Has Improved Internal Components
1977/11/30
Improved Gasket Prevents Oil Leakage From The Governor
1978/01/18
Modification Of Drive Adapter For Fuel Injection Test Bench
1978/05/24
Do not Use the 6V-4022 Fuel Injector Tester to Test Unit Injectors {0782, 1251, 1254, 1290, 1713}
2008/12/01
Special Instruction
Fuel System and Fuel Ratio Control Test Procedure{1264, 1278}
Fuel System and Fuel Ratio Control Test Procedure{1264, 1278}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Use Of 6V-4180 Timing Fixture Group To Check Off-Engine Timing Dimension Setting{1251, 0653}
Use Of 6V-4180 Timing Fixture Group To Check Off-Engine Timing Dimension Setting{1251, 0653}
Governor Linkage Adjustments{1264, 1289}
Governor Linkage Adjustments{1264, 1289}
Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}
Installation Of 8N4904 Printed Circuit Board Conversion Kit For Woodward UG8 Governors{1264, 1289}
Installation Of 8N4904 Printed Circuit Board Conversion Kit For Woodward UG8 Governors{1264, 1289}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Procedure to Properly Tighten the Nuts on the Solenoid Studs on Electronic Unit Injectors (EUI){1290, 1408, 1900}
Procedure to Properly Tighten the Nuts on the Solenoid Studs on Electronic Unit Injectors (EUI){1290, 1408, 1900}
Service Letter-NACD
Certain 2S7264 And 3S1467 Fuel Injection Pump Assemblies Need To Be Removed From Parts Stock
Certain 2S7264 And 3S1467 Fuel Injection Pump Assemblies Need To Be Removed From Parts Stock
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Service Letter-Truck/Ag/Marine
Specifications
Fuel Injection Equipment
D348 INDUSTRIAL & MARINE ENGINES
Governor
D348 INDUSTRIAL & MARINE ENGINES
Governor Linkage Adjustment
D348 INDUSTRIAL & MARINE ENGINES
Fuel Transfer Pump<BR> (7L7566) (2N799) (2N144) (3N2078)
D348 INDUSTRIAL & MARINE ENGINES
Variable Timing Drive For The Fuel Injection Pump Camshaft<BR> (4S9498) (4N6680)
D348 INDUSTRIAL & MARINE ENGINES
Governor Actuator<BR> (Woodward EG-3P)
D348 INDUSTRIAL & MARINE ENGINES
Governor<BR> (Woodward UG-8)
D348 INDUSTRIAL & MARINE ENGINES
Governor Air Actuator Linkage
D348 INDUSTRIAL & MARINE ENGINES
Governor Air Actuators<BR> (2N6006, 1N9318)
D348 INDUSTRIAL & MARINE ENGINES
Service Letter-China
Certain 2S7264 And 3S1467 Fuel Injection Pump Assemblies Need To Be Removed From Parts Stock
Certain 2S7264 And 3S1467 Fuel Injection Pump Assemblies Need To Be Removed From Parts Stock
Service Letter-Asia
Information Release Memo
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Service Letter-APD
Certain 2S7264 And 3S1467 Fuel Injection Pump Assemblies Need To Be Removed From Parts Stock
Certain 2S7264 And 3S1467 Fuel Injection Pump Assemblies Need To Be Removed From Parts Stock
Disassembly and Assembly
Fuel Transfer Pump (Earlier Engine)
D348 INDUSTRIAL & MARINE ENGINES
Fuel Transfer Pump (Later Engine)
D348 INDUSTRIAL & MARINE ENGINES
Fuel Injection Valves
D348 INDUSTRIAL & MARINE ENGINES
Fuel Injection Valve, Precombustion Chambers, Glow Plugs
D348 INDUSTRIAL & MARINE ENGINES
Variable Timing Unit
D348 INDUSTRIAL & MARINE ENGINES
Fuel Injection Pump Housing And Governor
D348 INDUSTRIAL & MARINE ENGINES
Governor
D348 INDUSTRIAL & MARINE ENGINES
Governor (Earlier Engine)
D348 INDUSTRIAL & MARINE ENGINES
Governor (Later)
D348 INDUSTRIAL & MARINE ENGINES
Fuel Injection Pump Housing
D348 INDUSTRIAL & MARINE ENGINES
Service Magazine
New Part Available To Check The 3S1467 Plunger And Barrel Assemblies{1251,1252,0652}
1980/05/12
New Plug With Straight-Threads Used In Engine Variable Timing Drive{1272}
1980/05/19
Woodward Governor Available For Parallel Generator Applications{1289,1264}
1981/04/06
Improvements To Optional Modification Of 5P4150 Nozzle Tester{0651,1254}
1981/08/17
New 6V4950 Injection Line Speed Pickup Group Used With 6V2100 Multitach{0651}
1982/05/03
Do Not Use A Wire Brush On Fuel Nozzles{1254}
1982/09/27
New Fuel Nozzle Test Sheet Available{0651,1254}
1982/10/04
Bulged Capsule-Type Fuel Nozzles{1254}
1982/10/11
Service Parts Available For The 5P4150 Nozzle Testing Group{0651,0652}
1982/11/22
New Governor Drive Gears And Weight Assemblies{1264}
1983/08/22
Service Information For Woodward Governors{0374,1264}
1983/09/26
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint{1264}
1983/11/07
Valve Lash Adjustment Not A Warranty Item {1102,1105}
1985/01/14
Only The External Needle Valve Can Be Adjusted On Woodward EG3PC Or EG10PC Actuators{1265,1289}
1985/02/04
Comparison Of Fuel Timing Tolerances For Field Settings{1250,1251,1281}
1985/10/28
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing{1253}
1986/03/10
Bleed Screw Washer (Seal) Must Be Replaced If Bleed Screw Removed From Fuel Nozzle{1254}
1986/04/07
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers{1257,1264}
1986/06/09
Update Information For Caterpillar Fuel Injection Equipment Test Stand{0782}
1986/06/16
Changes Have Been Made To OT Microfiche (Fuel Setting And Related Information){1250,1251,1281}
1986/06/16
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22
Nylon Seals Used On Lockwire To Seal Critical Areas; All Subsidiary Dealers Can Now Order Parts Service Seals {1257,1264}
1986/11/03
New Tie Bars Improve Stability Of The Fuel Injection Test Bench{0652}
1977/01/17
Test Used Fuel Nozzles Before You Install New Nozzles; Tips On Test Procedures{1254,0651,0336}
1977/02/14
With New 5P7448 Adapter, Earlier Fuel Injection Valves And Nozzles Can Be Tested And Adjusted On The 5P4150 Nozzle Testing Group{0651,1254}
1977/10/31
Improved Gasket Prevents Oil Leakage From The Governor{1264}
1978/01/16
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
Modification Of Drive Adapter For Fuel Injection Test Bench{0650,1272}
1978/05/22
New Drive Adapters For Fuel Injection Test Bench{0650}
1978/09/11
Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25
Adjustment Procedures And Lubrication Recommendations For Drive Pulleys On Caterpillar Fuel Injection Test Bench{0652}
1978/09/25
Caterpillar Fuel Injection Test Bench Book{0374}
1978/10/16
New FT2253 Cable Assembly Drawing Available For Kent-Moore Fuel Injection Test Bench{0782}
1988/01/04
Some Components Of The Variable Pulley And Adjustable Pulley On The Kent-Moore Fuel Injection Test Bench Are Available From Caterpillar{0782}
1988/04/18
Improved Woodward Governor Groups{1264,1289}
1979/01/08
Careful, Correct Installation And Maintenance Of Fuel Injection Lines Is Very Important To Prevent Possible Engine Damage, Fire And Other Problems{1252}
1979/04/23
9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28
Changes Made To 8S2243 And 8S4613 Wrenches Used On Fuel Injection Pumps{0612,1251}
1979/08/06
Service Kit Is Available For Woodward UG8 Governor{1289}
1979/08/27
General Information -- Diesel Fuels In Cold Temperature Operation{1280}
1979/12/17
Do Not Reuse the Hold Down Bolts for the Fuel Injectors On All Products that Contain C9 Through C32 Engines {1290}
2014/08/14

Caterpillar Parts SIS Catalog D348 :

PUMP GP-FUEL INJECTION
4N-6712 PUMP GP-FUEL INJECTION
FUEL PUMP HOUSING GROUP
9S-8987 FUEL PUMP HOUSING GROUP
FUEL PUMP HOUSING GROUP
9S-8987 FUEL PUMP HOUSING GROUP
PUMP GP-FUEL TRANSFER
3N-2078 PUMP GP-FUEL TRANSFER
PUMP GP-FUEL TRANSFER
3N-2078 PUMP GP-FUEL TRANSFER
PUMP GP-FUEL TRANSFER
3N-2078 PUMP GP-FUEL TRANSFER
FUEL TRANSFER PUMP GROUP
2N-0799 FUEL TRANSFER PUMP GROUP
FUEL LINES GROUP
3N-2745 FUEL LINES GROUP
PUMP GP-FUEL INJECTION
4N-6712 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
4N-6712 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
4N-6712 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
4N-6712 PUMP GP-FUEL INJECTION
VARIABLE TIMING DRIVE ASSEMBLY
4S-9498 VARIABLE TIMING DRIVE ASSEMBLY
DRIVE AS-VARIABLE TIMING
4N-6680 DRIVE AS-VARIABLE TIMING
VARIABLE TIMING DRIVE ASSEMBLY
4S-9398 VARIABLE TIMING DRIVE ASSEMBLY
DRIVE AS-VARIABLE TIMING
4N-6680 DRIVE AS-VARIABLE TIMING

Truck sale:

1972 CAT D348
USD $13,500 
1972 CAT D348

Hawthorne Cat
San Marcos, California
 
 
CAT D348

EURO AUCTIONS
United Kingdom
 
 
CAT D348

Yoder & Frey Auctioneers
Ashland, Ohio
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.