AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

9G9288 PROTECTION COVER GROUP--Hydraulic Tank Cap AN ATTACHMENT 120G MOTOR GRADER


HYDRAULIC SYSTEM
TANK GP
DRIVE GP
LINES GP-PUMP

MOTOR GRADER 120G MOTOR GRADER 82V
 120G MOTOR GRADER 82V00668-UP (MACHINE) POWERED BY 3304 ENGINE SEBP1045 120G 82V   (1974)

HYDRAULIC SYSTEM

TANK GP
HYDRAULIC TANK GROUP
8D-6670 HYDRAULIC TANK GROUP
HYDRAULIC TANK GROUP
8D-6670 HYDRAULIC TANK GROUP
TANK & MOUNTING GP-HYDRAULIC
2G-8220 TANK & MOUNTING GP-HYDRAULIC
TANK & MOUNTING GP-HYDRAULIC
2G-8220 TANK & MOUNTING GP-HYDRAULIC
TANK & MOUNTING GP-HYDRAULIC
2G-8220 TANK & MOUNTING GP-HYDRAULIC
TANK & MOUNTING GP-HYDRAULIC
2G-8220 TANK & MOUNTING GP-HYDRAULIC
COVER GP-PROTECTION
5D-1910 COVER GP-PROTECTION
COVER GP-PROTECTION
9G-9288 COVER GP-PROTECTION
 

#SEBP10450730
 

9G-9288: COVER GP-PROTECTION

9G9288 PROTECTION COVER GROUP--Hydraulic Tank Cap
AN ATTACHMENT
c228813 SEBP1045
9G9288 COVER GP-PROTECTION Parts scheme
  For full view, you need register

Parts for your 120G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1L-5072 [1] DOWEL  
2. 9M-7394 [1] LEVER  
3. 5D-1911 [1] COVER-HYDRAULIC CAP  
4. 2J-7761 [1] RING-RETAINING  
5. 5P-8502 [1] PADLOCK GP  
  5P-8500 A [2] KEY  
  A   NOT PART OF THIS GROUP
 

#SEBP10450731
 

7D-9600: DRIVE GP-PUMP

7D9600 PUMP DRIVE GROUP
7D9268 Joint parts are shown on Page 224
c207384 SEBP1045
7D9600 DRIVE GP-PUMP Parts scheme
  For full view, you need register

Parts for your 120G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1C-2251 [4] BOLT  
2. 7D-9268 Y [1] JOINT GROUP  
    (Separate Illustration)
3. 0S-1748 [4] BOLT  
4. 7D-9267 [1] YOKE  
5. 2L-6267 [4] LOCKNUT  
6. 1D-5120 [1] NUT  
  3B-4512 [1] LOCKWASHER  
  Y   SEPARATE ILLUSTRATION
 

#SEBP10450732
 

9D-1130: LINES GP-PUMP

9D1130 PUMP LINES GROUP--Part 1 of 3
Serial No. 87V1138 to 1915 and 87V1917 to 87V1919 inclusive and 82V668 to 82V714 inclusive
8J2011 and 9J792 Valve parts are shown on Page 229
c207289 SEBP1045
9D1130 LINES GP-PUMP Parts scheme
  For full view, you need register

Parts for your 120G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6K-3607 [2] CONNECTOR  
  2M-9780 [2] SEAL  
2. 4S-1962 [7] CLIP  
3. 0S-0509 [3] BOLT  
  3B-4506 [3] LOCKWASHER  
4. 9D-6275 [2] HOSE ASSEM. (not serv)  
    For service of each furnish:
  5P-0179 H HOSE 354 cm(139.37 in.)  
  3S-8606 [2] SLEEVE  
  8S-4055 [1] COUPLING ASSEM. (straight)  
  8S-6391 [1] COUPLING ASSEM. (90 degrees)  
5. 8M-0505 [2] CONNECTOR  
6. 3K-0360 [5] SEAL  
7. 8J-2011 Y [1] VALVE GROUP  
    (Separate Illustration)
8. 030-7942 [1] ELBOW  
  3J-1907 [1] SEAL  
9. 0T-0319 [3] BOLT  
  2H-3920 [3] LOCKWASHER  
  8D-7185 [3] WASHER  
  8D-0983 [3] MOUNTING  
10. 9D-6361 [1] PLATE ASSEM.  
11. 9D-9284 [1] PIN (large)  
  4J-5325 [1] PIN (small)  
  3B-4607 [1] COTTER PIN  
12. 9J-0792 Y [1] VALVE GROUP  
    (Separate Illustration)
13. 030-8188 [2] CONNECTOR  
14. 9D-5988 C [1] HOSE ASSEM. (not serv)  
    For service furnish:
  5P-0178 H HOSE 29 cm(11.42 in.)  
  4S-5414 [2] SLEEVE  
  8S-6417 [2] COUPLING ASSEM.  
15. 005-4362 [1] ELBOW  
16. 9D-5992 [1] HOSE ASSEM. (not serv)  
    For service furnish:
  5P-0178 H HOSE 55 cm(21.65 in.)  
  4S-5414 [2] SLEEVE  
  8S-6417 [1] COUPLING ASSEM. (straight)  
  1P-9919 [1] COUPLING ASSEM. (45 degrees)  
  C   INDICATES CHANGE
  Y   SEPARATE ILLUSTRATION
  H   ORDER BY THE CENTIMETRE
 

#SEBP10450733
 

9D-1130: LINES GP-PUMP

9D1130 PUMP LINES GROUP--Part 2 of 3
Serial No. 87V1138 to 1915 and 87V1917 to 87V1919 inclusive and 82V668 to 82V714 inclusive
c207290 SEBP1045
9D1130 LINES GP-PUMP Parts scheme
  For full view, you need register

Parts for your 120G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9D-8557 [1] HOSE ASSEM. (not serv)  
    For service furnish:
  5P-0180 H HOSE 55 cm(21.65 in.)  
  3S-7166 [2] SLEEVE  
  9S-9726 [1] COUPLING ASSEM. (45 degrees)  
  8S-3759 [1] COUPLING ASSEM. (straight)  
2. 9D-0884 [2] CONNECTOR  
3. 3D-2824 [8] SEAL  
4. [1] PLUG  
  3J-1907 [1] SEAL  
5. 030-7944 [4] ELBOW  
6. 9D-5902 [1] HOSE ASSEM. (not serv)  
    For service furnish:
  5P-0180 C HOSE 56 cm(22.04 in.)  
  3S-7166 [2] SLEEVE  
  8S-3759 [2] COUPLING ASSEM. (straight)  
7. 4S-6797 [1] CONNECTOR  
  2S-4078 [1] SEAL  
8. 9D-5993 [1] HOSE ASSEM. (not serv)  
    For service furnish:
  5P-0181 H HOSE 37 cm(14.57 in.)  
  3S-7252 [2] SLEEVE  
  8S-3918 [1] COUPLING ASSEM. (straight)  
  1P-9589 [1] COUPLING ASSEM. (90 degrees)  
9. 9D-6277 [1] HOSE ASSEM.  
    (Includes)
  5P-0181 H HOSE 62 cm(24.41 in.)  
  7S-0574 [1] STEM ASSEM. (60 degrees)  
10. 3S-7252 [2] SLEEVE  
11. 8K-5114 [1] COUPLING ASSEM. (90 degrees)  
12. 030-7945 [1] ELBOW  
13. 2R-6276 [1] CONNECTOR  
14. 9D-5899 [2] HOSE ASSEM. (not serv)  
    For service of each furnish:
  5P-0180 H HOSE 82 cm(32.28 in.)  
  3S-7166 [2] SLEEVE  
  8S-3759 [2] COUPLING ASSEM.  
15. 030-7950 [1] ELBOW  
16. 1P-4578 [2] FLANGE  
  4J-0522 [1] SEAL  
17. 0T-0772 [4] BOLT  
  4D-6433 [4] WASHER  
18. 030-7935 [1] CONNECTOR  
19. 7M-8485 [2] SEAL  
  C   INDICATES CHANGE
  H   ORDER BY THE CENTIMETRE
 

#SEBP10450734
 

9D-1130: LINES GP-PUMP

9D1130 PUMP LINES GROUP--Part 3 of 3
Serial No. 87V1138 to 1915 and 87V1917 to 87V1919 inclusive and 82V668 to 82V714 inclusive
c161566 SEBP1045
9D1130 LINES GP-PUMP Parts scheme
  For full view, you need register

Parts for your 120G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9D-6060 C [1] HOSE ASSEM. (not serv)  
    For service Furnish:
  5P-0179 H HOSE 57 cm(22.44 in.)  
  3S-8606 [2] SLEEVE  
  8S-6391 [1] COUPLING ASSEM. (90 degrees)  
  8S-4055 [1] COUPLING ASSEM. (straight)  
2. 8M-0505 [3] CONNECTOR  
3. 3K-0360 [7] SEAL  
4. 5P-2230 [4] CLAMP  
5. 7K-4975 [2] HOSE  
6. 8D-6774 [1] TUBE ASSEM.  
7. 0S-1594 [3] BOLT  
  4B-4278 [3] WASHER  
8. 3B-4506 [11] LOCKWASHER  
9. 3B-1915 [6] BOLT  
  0L-1319 [9] WASHER  
  1P-7115 [6] GROMMET ASSEM.  
10. 8D-6811 [1] PLATE  
11. 9S-8008 [1] PLUG  
12. 3D-2824 [3] SEAL  
13. 9S-4185 [2] PLUG  
14. 9D-6669 [1] BLOCK  
15. 9D-6274 [1] HOSE ASSEM. (not serv)  
    For service furnish:
  5P-0179 H HOSE 34 cm(13.39 in.)  
  3S-8606 [2] SLEEVE  
  8S-6391 [1] COUPLING ASSEM. (90 degrees)  
  8S-4055 [1] COUPLING ASSEM. (straight)  
  6K-3607 [1] CONNECTOR  
  2M-9780 [1] SEAL  
16. 9D-6272 [1] HOSE ASSEM. (not serv)  
    For service furnish:
  5P-0178 CH HOSE 93 cm(36.61 in.)  
  4S-5414 C [2] SLEEVE  
  8S-6417 C [1] COUPLING ASSEM. (straight)  
  8S-6393 C [1] COUPLING ASSEM. (90 degrees)  
17. 005-4362 C [1] ELBOW  
18. 9D-6271 [1] HOSE ASSEM. (not serv)  
    For service furnish:
  5P-0178 H HOSE 81 cm(31.89 in.)  
  4S-5414 [2] SLEEVE  
  8S-6417 [1] COUPLING ASSEM. (straight)  
  8S-6393 [1] COUPLING ASSEM. (90 degrees)  
19. 6K-9194 [2] ELBOW  
  2R-6806 [2] CONNECTOR  
20. 3J-1907 [3] SEAL  
21. 9S-8004 [1] PLUG  
22. 8D-0407 [1] TUBE ASSEM.  
23. 2R-6276 [2] CONNECTOR  
24. 9D-7275 [1] TUBE ASSEM.  
25. 8D-9918 [1] PLATE ASSEM.  
    (Includes)
  9F-2978 [2] NUT  
26. 0T-0573 [2] BOLT  
27. 8S-4108 [1] FLANGE  
  8F-6711 [1] SEAL  
28. 0S-1587 [8] BOLT  
  3B-4508 [8] LOCKWASHER  
29. 8D-0087 [1] STEM ASSEM.  
30. 5P-1293 H HOSE 17.78 cm(7 in.)  
31. 5P-0597 [2] CLAMP  
32. 8D-8866 [1] TUBE ASSEM.  
33. 8S-4107 [1] FLANGE  
  5H-8848 [1] SEAL  
34. 8D-6775 [1] TUBE ASSEM.  
35. 030-7935 [2] CONNECTOR  
  7M-8485 [2] SEAL  
  C   INDICATES CHANGE
  H   ORDER BY THE CENTIMETRE
 

#SEBP10450735
 

9D-1130: LINES GP-PUMP

9D1130 PUMP LINES GROUP--Part 1 of 3
Serial No. 87V1916 and 87V1920 to 87V3202 inclusive and 82V715 to 82V803 inclusive
8J2011 and 9J792 Valve parts are shown on Page 229
c160810 SEBP1045
9D1130 LINES GP-PUMP Parts scheme
  For full view, you need register

Parts for your 120G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6K-3607 [2] CONNECTOR  
  2M-9780 [2] SEAL  
2. 4S-1962 [7] CLIP  
3. 0S-0509 [3] BOLT  
  3B-4506 [3] LOCKWASHER  
4. 9D-6275 [2] HOSE ASSEM. (not serv)  
    For service of each furnish:
  5P-0179 H HOSE 354 cm(139.37 in.)  
  3S-8606 [2] SLEEVE  
  8S-4055 [1] COUPLING ASSEM. (straight)  
  8S-6391 [1] COUPLING ASSEM. (90 degrees)  
5. 8M-0505 [2] CONNECTOR  
6. 3K-0360 [5] SEAL  
7. 8J-2011 Y [1] VALVE GROUP  
    (Separate Illustration)
8. 030-7942 [1] ELBOW  
  3J-1907 [1] SEAL  
9. 0T-0319 [3] BOLT  
  2H-3920 [3] LOCKWASHER  
  8D-7185 [3] WASHER  
  8D-0983 [3] MOUNTING  
10. 9D-6361 [1] PLATE ASSEM.  
11. 9D-9284 [1] PIN (large)  
  4J-5325 [1] PIN (small)  
  3B-4607 [1] COTTER PIN  
12. 9J-0792 Y [1] VALVE GROUP  
    (Separate Illustration)
13. 030-8188 [2] CONNECTOR  
14. 9D-5988 [1] HOSE ASSEM. (not serv)  
    For service furnish:
  5P-0178 H HOSE 29 cm(11.42 in.)  
  4S-5414 [2] SLEEVE  
  8S-6417 [2] COUPLING ASSEM.  
15. 005-4362 [1] ELBOW  
16. 9D-5992 [1] HOSE ASSEM. (not serv)  
    For service furnish:
  5P-0178 H HOSE 55 cm(21.65 in.)  
  4S-5414 [2] SLEEVE  
  8S-6417 [1] COUPLING ASSEM. (straight)  
  1P-9919 [1] COUPLING ASSEM. (45 degrees)  
  H   ORDER BY THE CENTIMETRE
  Y   SEPARATE ILLUSTRATION
 

#SEBP10450736
 

9D-1130: LINES GP-PUMP

9D1130 PUMP LINES GROUP--Part 2 of 3
Serial No. 87V1916 and 87V1920 to 87V3202 inclusive and 82V715 to 82V803 inclusive
c160811 SEBP1045
9D1130 LINES GP-PUMP Parts scheme
  For full view, you need register

Parts for your 120G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9D-8557 [1] HOSE ASSEM. (not serv)  
    For service furnish:
  5P-0180 H HOSE 55 cm(21.65 in.)  
  3S-7166 [2] SLEEVE  
  9S-9726 [1] COUPLING ASSEM. (45 degrees)  
  8S-3759 [1] COUPLING ASSEM. (straight)  
2. 9D-0884 [2] CONNECTOR  
3. 3D-2824 [8] SEAL  
4. [1] PLUG  
  3J-1907 [1] SEAL  
5. 030-7944 [4] ELBOW  
6. 9D-5902 [1] HOSE ASSEM. (not serv)  
    For service furnish:
  5P-0180 HOSE 56 cm(22.04 in.)  
  3S-7166 [2] SLEEVE  
  8S-3759 [2] COUPLING ASSEM. (straight)  
7. 4S-6797 [1] CONNECTOR  
  2S-4078 [1] SEAL  
8. 9D-5993 [1] HOSE ASSEM. (not serv)  
    For service furnish:
  5P-0181 H HOSE 37 cm(14.57 in.)  
  3S-7252 [2] SLEEVE  
  8S-3918 [1] COUPLING ASSEM. (straight)  
  1P-9589 [1] COUPLING ASSEM. (90 degrees)  
9. 9D-6277 [1] HOSE ASSEM.  
    (Includes)
  5P-0181 H HOSE 62 cm(24.41 in.)  
  7S-0574 [1] STEM ASSEM. (60 degrees)  
10. 3S-7252 [2] SLEEVE  
11. 8K-5114 [1] COUPLING ASSEM. (90 degrees)  
12. 030-7945 [1] ELBOW  
13. 2R-6276 [1] CONNECTOR  
14. 9D-5899 [2] HOSE ASSEM. (not serv)  
    For service of each furnish:
  5P-0180 H HOSE 82 cm(32.28 in.)  
  3S-7166 [2] SLEEVE  
  8S-3759 [2] COUPLING ASSEM.  
15. 030-7950 [1] ELBOW  
16. 1P-4578 [2] FLANGE  
  4J-0522 [1] SEAL  
17. 0T-0772 [4] BOLT  
  4D-6433 [4] WASHER  
18. 030-7935 [1] CONNECTOR  
19. 7M-8485 [2] SEAL  
  H   ORDER BY THE CENTIMETRE
 

#SEBP10450737
 

9D-1130: LINES GP-PUMP

9D1130 PUMP LINES GROUP--Part 3 of 3
Serial No. 87V1916 and 87V1920 and 87V3202 inclusive and 82V715 and 87V803 inclusive
c160812 SEBP1045
9D1130 LINES GP-PUMP Parts scheme
  For full view, you need register

Parts for your 120G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9D-6060 [1] HOSE ASSEM. (not serv)  
    For service Furnish:
  5P-0179 H HOSE 57 cm(22.44 in.)  
  3S-8606 [2] SLEEVE  
  8S-6391 [1] COUPLING ASSEM. (90 degrees)  
  8S-4055 [1] COUPLING ASSEM. (straight)  
2. 8M-0505 [3] CONNECTOR  
3. 3K-0360 [7] SEAL  
4. 5P-2230 [4] CLAMP  
5. 7K-4975 [2] HOSE  
6. 8D-6774 [1] TUBE ASSEM.  
7. 0S-1594 [3] BOLT  
  4B-4278 [3] WASHER  
8. 3B-4506 [11] LOCKWASHER  
9. 3B-1915 [6] BOLT  
  0L-1319 [9] WASHER  
  1P-7115 [6] GROMMET ASSEM.  
10. 8D-6811 [1] PLATE  
11. 9S-8008 [1] PLUG  
12. 3D-2824 [3] SEAL  
13. 9S-4185 [2] PLUG  
14. 9D-6669 [1] BLOCK  
15. 9D-6274 [1] HOSE ASSEM. (not serv)  
    For service furnish:
  5P-0179 H HOSE 34 cm(13.39 in.)  
  3S-8606 [2] SLEEVE  
  8S-6391 [1] COUPLING ASSEM. (90 degrees)  
  8S-4055 [1] COUPLING ASSEM. (straight)  
  6K-3607 [1] CONNECTOR  
  2M-9780 [1] SEAL  
16. 9D-6272 CH [2] HOSE ASSEM. (not serv)  
    For service of each furnish:
  5P-0178 H HOSE 93 cm(36.61 in.)  
  4S-5414 [2] SLEEVE  
  8S-6417 [1] COUPLING ASSEM. (straight)  
  8S-6393 [1] COUPLING ASSEM. (90 degrees)  
17. 005-4362 C [2] ELBOW  
19. 6K-9194 [2] ELBOW  
  2R-6806 [2] CONNECTOR  
20. 3J-1907 [3] SEAL  
21. 9S-8004 [1] PLUG  
22. 8D-0407 [1] TUBE ASSEM.  
23. 2R-6276 [2] CONNECTOR  
24. 9D-7275 [1] TUBE ASSEM.  
25. 8D-9918 [1] PLATE ASSEM.  
    (Includes)
  9F-2978 [2] NUT  
26. 0T-0573 [2] BOLT  
27. 5P-5059 C [1] FLANGE  
  8F-6711 [1] SEAL  
28. 0S-1587 [8] BOLT  
29. 8D-0087 [1] STEM ASSEM.  
30. 5P-1293 H HOSE 17.78 cm(7 in.)  
31. 5P-0597 [2] CLAMP  
32. 8D-8866 [1] TUBE ASSEM.  
33. 5P-5061 C [1] FLANGE  
  5H-8848 [1] SEAL  
34. 8D-6775 [1] TUBE ASSEM.  
35. 030-7935 [2] CONNECTOR  
  7M-8485 [2] SEAL  
  C   INDICATES CHANGE
  H   ORDER BY THE CENTIMETRE
 

#SEBP10450738
 

9D-1130: LINES GP-PUMP

9D1130 PUMP LINES GROUP--Part 1 of 3
Serial No. 87V3203 to 87V3973 inclusive and 82V804 to 82V861 inclusive
8J2011 and 3G5187 Valve parts are shown on Pages 229 and 230
c168386 SEBP1045
9D1130 LINES GP-PUMP Parts scheme
  For full view, you need register

Parts for your 120G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6K-3607 [2] CONNECTOR  
  2M-9780 [2] SEAL  
2. 4S-1962 [7] CLIP  
3. 0S-0509 [3] BOLT  
  3B-4506 [3] LOCKWASHER  
4. 9D-6275 [2] HOSE ASSEM. (not serv)  
    For service of each furnish:
  5P-0179 H HOSE 354 cm(139.37 in.)  
  3S-8606 [2] SLEEVE  
  8S-4055 [1] COUPLING ASSEM. (straight)  
  8S-6391 [1] COUPLING ASSEM. (90 degrees)  
5. 8M-0505 [2] CONNECTOR  
6. 3K-0360 [5] SEAL  
7. 8J-2011 Y [1] VALVE GROUP  
    (Separate Illustration)
8. 030-7942 [1] ELBOW  
  3J-1907 [1] SEAL  
9. 0T-0319 [3] BOLT  
  2H-3920 [3] LOCKWASHER  
  8D-7185 [3] WASHER  
  8D-0983 [3] MOUNTING  
10. 9D-6361 [1] PLATE ASSEM.  
11. 9D-9284 [1] PIN (large)  
  4J-5325 [1] PIN (small)  
  3B-4607 [1] COTTER PIN  
12. 3G-5187 YC [1] VALVE GROUP  
    (Separate Illustration)
13. 030-8188 [2] CONNECTOR  
14. 9D-5988 [1] HOSE ASSEM. (not serv)  
    For service furnish:
  5P-0178 H HOSE 29 cm(11.42 in.)  
  4S-5414 [2] SLEEVE  
  8S-6417 [2] COUPLING ASSEM.  
15. 005-4362 [1] ELBOW  
16. 9D-5992 [1] HOSE ASSEM. (not serv)  
    For service furnish:
  5P-0178 H HOSE 55 cm(21.65 in.)  
  4S-5414 [2] SLEEVE  
  8S-6417 [1] COUPLING ASSEM. (straight)  
  1P-9919 [1] COUPLING ASSEM. (45 degrees)  
  C   INDICATES CHANGE
  Y   SEPARATE ILLUSTRATION
  H   ORDER BY THE CENTIMETRE
 

#SEBP10450739
 

9D-1130: LINES GP-PUMP

9D1130 PUMP LINES GROUP--Part 2 of 3
Serial No. 87V3203 to 87V3973 inclusive and 82V804 to 82V861 inclusive
c168613 SEBP1045
9D1130 LINES GP-PUMP Parts scheme
  For full view, you need register

Parts for your 120G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9D-8557 [1] HOSE ASSEM. (not serv)  
    For service furnish:
  5P-0180 H HOSE 55 cm(21.65 in.)  
  3S-7166 [2] SLEEVE  
  9S-9726 [1] COUPLING ASSEM. (45 degrees)  
  8S-3759 [1] COUPLING ASSEM. (straight)  
2. 9D-0884 [2] CONNECTOR  
3. 3D-2824 [8] SEAL  
4. [1] PLUG  
  3J-1907 [1] SEAL  
5. 030-7944 [4] ELBOW  
6. 9D-5902 [1] HOSE ASSEM. (not serv)  
    For service furnish:
  5P-0180 H HOSE 56 cm(22.04 in.)  
  3S-7166 [2] SLEEVE  
  8S-3759 [2] COUPLING ASSEM. (straight)  
7. 4S-6797 [1] CONNECTOR  
  2S-4078 [1] SEAL  
8. 9D-5993 [1] HOSE ASSEM. (not serv)  
    For service furnish:
  5P-0181 H HOSE 37 cm(14.57 in.)  
  3S-7252 [2] SLEEVE  
  8S-3918 [1] COUPLING ASSEM. (straight)  
  1P-9589 [1] COUPLING ASSEM. (90 degrees)  
9. 9D-6277 [1] HOSE ASSEM.  
    (Includes)
  5P-0181 H HOSE 62 cm(24.41 in.)  
  7S-0574 [1] STEM ASSEM. (60 degrees)  
10. 3S-7252 [2] SLEEVE  
11. 8K-5114 [1] COUPLING ASSEM. (90 degrees)  
12. 030-7945 [1] ELBOW  
13. 2R-6276 [1] CONNECTOR  
14. 9D-5899 [2] HOSE ASSEM. (not serv)  
    For service of each furnish:
  5P-0180 H HOSE 82 cm(32.28 in.)  
  3S-7166 [2] SLEEVE  
  8S-3759 [2] COUPLING ASSEM.  
15. 030-7950 [1] ELBOW  
16. 1P-4578 [2] FLANGE  
  4J-0522 [1] SEAL  
17. 0T-0772 [4] BOLT  
  4D-6433 [4] WASHER  
18. 030-7935 [1] CONNECTOR  
19. 7M-8485 [2] SEAL  
  H   ORDER BY THE CENTIMETRE
 

Information:

Caterpillar Parts SIS Catalog 120G :

UNIVERSAL JOINT GROUP
7D-9268 UNIVERSAL JOINT GROUP
COVER GP-PROTECTION
5D-1910 COVER GP-PROTECTION
TANK & MOUNTING GP-HYDRAULIC
2G-8220 TANK & MOUNTING GP-HYDRAULIC
TANK & MOUNTING GP-HYDRAULIC
2G-8220 TANK & MOUNTING GP-HYDRAULIC
TANK & MOUNTING GP-HYDRAULIC
2G-8220 TANK & MOUNTING GP-HYDRAULIC
TANK & MOUNTING GP-HYDRAULIC
2G-8220 TANK & MOUNTING GP-HYDRAULIC
HYDRAULIC TANK GROUP
8D-6670 HYDRAULIC TANK GROUP
HYDRAULIC TANK GROUP
8D-6670 HYDRAULIC TANK GROUP
DRIVE GP-PUMP
7D-9600 DRIVE GP-PUMP
LINES GP-PUMP
9D-1130 LINES GP-PUMP
LINES GP-PUMP
9D-1130 LINES GP-PUMP
LINES GP-PUMP
9D-1130 LINES GP-PUMP
LINES GP-PUMP
9D-1130 LINES GP-PUMP
LINES GP-PUMP
9D-1130 LINES GP-PUMP
LINES GP-PUMP
9D-1130 LINES GP-PUMP
LINES GP-PUMP
9D-1130 LINES GP-PUMP

Truck sale:

Caterpillar 120G
 
Caterpillar 120G
- motor graders
HOLT CAT
 
40,000 
Caterpillar 120G, motor graders, Construction
- motor graders
ALTORFER INC.
Caterpillar H120GCS.CW40S, hammer, Construction
18,210 
Caterpillar H120GCS.CW40S, hammer, Construction
- hammer
BERGERAT MONNOYEUR S.A.S.
Caterpillar 120G, motor graders, Construction
32,000 
Caterpillar 120G, motor graders, Construction
- motor graders
FOLEY EQUIPMENT COMPANY
 
33,500 
Caterpillar HH120GCS, hammer, Construction


Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.