AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

9D6505 POWER BLADE AND TIP CIRCLE GROUP--Type 1 Part of 9D6470, 9D6475, 2G6322 & 2G440 Power Blade & Tip Arrangements listed on Pages 287, 287A & 287B 9D6427 Circle parts are shown on Page 188. AN ATTACHMENT 130G


IMPLEMENTS
CIRCLE GP
HYDRAULIC SYSTEM
VALVE GP
IMPLEMENTS
CIRCLE GP
HYDRAULIC SYSTEM
LINES GP-HYDRAULIC

MOTOR GRADER 130G MOTOR GRADER 74V
 130G MOTOR GRADER 74V00588-01656 (MACHINE) POWERED BY 3304 ENGINE SEBP1047 130G 74V   (1975)

IMPLEMENTS

CIRCLE GP
CIRCLE GP
9D-8865 CIRCLE GP
CIRCLE GP
9D-8865 CIRCLE GP
CIRCLE GP
9D-6505 CIRCLE GP
CIRCLE GP
9D-6505 CIRCLE GP
CIRCLE GP
9D-6505 CIRCLE GP
CIRCLE GP
9D-6505 CIRCLE GP
 

#SEBP10470590
 

9D-6505: CIRCLE GP

9D6505 POWER BLADE AND TIP CIRCLE GROUP--Type 1
Part of 9D6470, 9D6475, 2G6322 & 2G440 Power Blade & Tip Arrangements listed on Pages 287, 287A & 287B
9D6427 Circle parts are shown on Page 188. AN ATTACHMENT
c207470 SEBP1047
9D6505 CIRCLE GP Parts scheme
  For full view, you need register

Parts for your 130G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0S-1619 [2] BOLT  
  3B-4506 [2] LOCKWASHER  
2. 9D-6427 Y [1] CIRCLE ASSEM.  
    (Separate Illustration)
3. 9S-1366 [2] BOLT  
  1H-7855 [2] SPACER 1.38 in.(3.51 cm) long  
  8F-4028 [2] SPACER .25 in.(.64 cm) long  
4. 3B-4508 [44] LOCKWASHER  
5. 4B-5273 [6] WASHER  
6. 8D-5862 [1] GUARD ASSEM.  
7. 6H-1717 [42] BOLT 1.125 in.(2.86 cm) long  
8. 5D-0134 [4] STRIP (end)  
  9D-6638 [1] STRIP (center)  
9. 8D-5946 [1] BRACKET ASSEM.  
    (Includes)
10. 8S-9092 [2] BOLT 2.25 in.(5.72 cm) long  
  1A-8537 [2] BOLT 2.75 in.(6.99 cm) long  
  3B-4510 [4] LOCKWASHER  
11. 5D-6644 [10] SHIM  
12. 8D-5863 [1] GUARD ASSEM.  
15. 2G-3221 C [5] SHIM .060 in.(.15 cm) thick  
17. 7F-3708 [2] PIN  
  1D-0503 [2] WASHER  
  2B-2673 [2] NUT  
  3B-4617 [2] COTTER PIN  
19. 8D-5842 C [1] BRACKET (L.H.)  
  8D-5841 [1] BRACKET (R.H.)  
20. 6D-6423 [2] BOLT  
  9F-4364 [2] NUT  
  0S-1822 [2] WASHER .25 in.(.64 cm) thick  
  7D-1446 [2] WASHER .188 in.(.48 cm) thick  
  2H-3768 [2] COTTER PIN  
22. 7F-0482 [4] NUT  
23. 8D-5949 [1] BAR  
24. 6D-5415 [10] PLATE  
25. 4B-4285 [2] WASHER .125 in.(.32 cm) thick  
  C   INDICATES CHANGE
  Y   SEPARATE ILLUSTRATION
 

#SEBP10470591
 

9D-6505: CIRCLE GP

9D6505 POWER BLADE AND TIP CIRCLE GROUP--Type 2
Part of 9D6470, 9D6475, 2G6322 & 2G440 Blade & Tip Arrangements listed on Pages 287, 287A & 287B
2G3978 Circle & Beam parts are shown on Page 188A. AN ATTACHMENT
c159238 SEBP1047
9D6505 CIRCLE GP Parts scheme
  For full view, you need register

Parts for your 130G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0S-1619 [2] BOLT  
  3B-4506 [2] LOCKWASHER  
2. 2G-3978 YC [1] CIRCLE ASSEM.  
    (Separate Illustration)
3. 9S-1366 [2] BOLT  
  1H-7855 [2] SPACER 1.38 in.(3.51 cm) long  
  8F-4028 [2] SPACER .25 in.(.64 cm) long  
4. 3B-4508 [44] LOCKWASHER  
5. 4B-5273 [6] WASHER  
6. 8D-5862 [1] GUARD ASSEM.  
7. 6H-1717 [42] BOLT 1.125 in.(2.86 cm) long  
8. 5D-0134 [4] STRIP (end)  
  9D-6638 [1] STRIP (center)  
9. 8D-5946 [1] BRACKET ASSEM.  
    (Includes)
10. 8S-9092 [2] BOLT 2.25 in.(5.72 cm) long  
  1A-8537 [2] BOLT 2.75 in.(6.99 cm) long  
  3B-4510 [4] LOCKWASHER  
11. 5D-6644 [10] SHIM  
12. 8D-5863 [1] GUARD ASSEM.  
15. 2G-3221 [5] SHIM .060 in.(.15 cm) thick  
17. 7F-3708 [2] PIN  
  1D-0503 [2] WASHER  
  2B-2673 [2] NUT  
  3B-4617 [2] COTTER PIN  
19. 8D-5842 [1] BRACKET (L.H.)  
  8D-5841 [1] BRACKET (R.H.)  
20. 6D-6423 [2] BOLT  
  9F-4364 [2] NUT  
  0S-1822 [2] WASHER .25 in. (.64 cm) thick  
  7D-1446 [2] WASHER .188 in. (.48 cm) thick  
  2H-3768 [2] COTTER PIN  
22. 7F-0482 [4] NUT  
23. 8D-5949 [1] BAR  
24. 6D-5415 [10] PLATE  
25. 4B-4285 [2] WASHER .125 in.(.32 cm) thick  
  C   INDICATES CHANGE
  Y   SEPARATE ILLUSTRATION
 

#SEBP10470592
 

9D-6505: CIRCLE GP

9D6505 POWER BLADE AND TIP CIRCLE GROUP--Type 3
Part of 9D6470, 9D6475, 2G6322 & 2G440 Blade & Tip Arrangements listed on Pages 287, 287A & 287B
2G3978 Circle & Beam parts are shown on Page 188A. AN ATTACHMENT
c224326 SEBP1047
9D6505 CIRCLE GP Parts scheme
  For full view, you need register

Parts for your 130G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0S-1619 [2] BOLT  
  3B-4506 [2] LOCKWASHER  
2. 2G-3978 Y [1] CIRCLE ASSEM.  
    (Separate Illustration)
3. 9S-1366 [2] BOLT  
  1H-7855 [2] SPACER 3.51 cm(1.38 in.) long  
  8F-4028 [2] SPACER .64 cm(.25 in.) long  
4. 3B-4508 [44] LOCKWASHER  
5. 4B-5273 [6] WASHER  
6. 8D-5862 [1] GUARD ASSEM.  
7. 6H-1717 [42] BOLT 2.86 cm(1.125 in.) long  
8. 5D-0134 [4] STRIP (end)  
  9D-6638 [1] STRIP (center)  
9. 2G-8786 C [1] BRACKET ASSEM.  
    (Includes)
10. 8S-9092 [2] BOLT 5.72 cm(2.25 in.) long  
  1A-8537 [2] BOLT 6.99 cm(2.75 in.) long  
  3B-4510 [4] LOCKWASHER  
11. 5D-6644 [10] SHIM  
12. 8D-5863 [1] GUARD ASSEM.  
13. 6D-5415 [10] PLATE  
14. 8D-5949 [1] BAR  
15. 2G-3221 [5] SHIM .15 cm(.06 in.) thick  
16. 7F-0482 [4] NUT  
17. 3B-4647 C [2] COTTER PIN  
18. 2B-2673 [2] NUT  
  1D-0503 [2] WASHER  
19. 2G-8731 C [1] BRACKET (L.H.)  
  2G-8729 C [1] BRACKET (R.H.)  
20. 1D-4641 C [2] BOLT  
  6K-3632 C [2] NUT  
  0S-1822 [2] WASHER .64 cm(.25 in.) thick  
  7D-1446 [2] WASHER .48 cm(.188 in.) thick  
  C   INDICATES CHANGE
  Y   SEPARATE ILLUSTRATION
 

#SEBP10470593
 

9D-6505: CIRCLE GP

9D6505 POWER BLADE AND TIP CIRCLE GROUP--Type 4
Part of 9D6470, 9D6475, 2G6322 & 2G440 Blade & Tip Arrangements listed on Pages 287, 287A & 287B
6G2900 Circle parts are shown on Page 187B. AN ATTACHMENT
c175929 SEBP1047
9D6505 CIRCLE GP Parts scheme
  For full view, you need register

Parts for your 130G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0S-1619 [2] BOLT  
  3B-4506 [2] LOCKWASHER  
2. 6G-2900 CY [1] CIRCLE ASSEM.  
    (Separate Illustration)
3. 9S-1366 [2] BOLT  
  1H-7855 [2] SPACER 3.51 cm(1.38 in.) long  
  8F-4028 [2] SPACER .64 cm(.25 in.) long  
4. 3B-4508 [44] LOCKWASHER  
5. 4B-5273 [6] WASHER  
6. 8D-5862 [1] GUARD ASSEM.  
7. 6H-1717 [42] BOLT 2.86 cm(1.125 in.) long  
8. 5D-0134 [4] STRIP (end)  
  9D-6638 [1] STRIP (center)  
9. 2G-8786 [1] BRACKET ASSEM.  
    (Includes)
10. 8S-9092 [2] BOLT 5.72 cm(2.25 in.) long  
  1A-8537 [2] BOLT 6.99 cm(2.75 in.) long  
  3B-4510 [4] LOCKWASHER  
11. 5D-6644 [10] SHIM  
12. 8D-5863 [1] GUARD ASSEM.  
13. 6D-5415 [10] PLATE  
14. 8D-5949 [1] BAR  
15. 2G-3221 [5] SHIM .15 cm(06 in.) thick  
16. 7F-0482 [4] NUT  
17. 3B-4647 [2] COTTER PIN  
18. 2B-2673 [2] NUT  
  1D-0503 [2] WASHER  
19. 2G-8731 [1] BRACKET (L.R.)  
  2G-8729 [1] BRACKET (R.H.)  
20. 1D-4641 [2] BOLT  
  6K-3632 [2] NUT  
  0S-1822 [2] WASHER .64 cm(.25 in.) thick  
  7D-1446 [2] WASHER .48 cm(.188 in.) thick  
21. 6G-2947 C [1] SHAFT  
  C   INDICATES CHANGE
  Y   SEPARATE ILLUSTRATION
 

#SEBP10470594
 

6G-2900: CIRCLE AS

6G2900 CIRCLE ASSEMBLY
Part of 9D6505 Power Blade & Tip Circle Group shown on Page 187A
AN ATTACHMENT
c175930 SEBP1047
6G2900 CIRCLE AS Parts scheme
  For full view, you need register

Parts for your 130G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2G-3971 [1] BRACKET ASSEM.  
2. 6G-2946 [2] STOP  
3. 6G-2940 [1] CIRCLE ASSEM.  
    (Includes)
4. 7B-5037 [2] LOCK  
5. 6G-2949 [1] BRACE  
6. 4D-4375 [2] LUG  
7. 8D-3093 [2] SPACER  
  9D-2185 [2] SHIM 2.54 mm(.100 in.) thick  
  9D-2186 [2] SHIM 1.27 mm(.050 in.) thick  
 

#SEBP10470595
 

9D-6427: POWER BLADE AND TIP CIRCLE ASSEMBLY

9D6427 POWER BLADE AND TIP CIRCLE ASSEMBLY--Replaced by 2G3978
Part of 9D6505 Power Blade & Tip Circle Group shown on Page 186A
AN ATTACHMENT
c172503 SEBP1047
9D6427 POWER BLADE AND TIP CIRCLE ASSEMBLY Parts scheme
  For full view, you need register

Parts for your 130G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7B-5037 [2] LOCK  
2. 8D-0461 [1] BRACE ASSEM.  
3. 9D-3221 [1] BRACKET  
4. 4D-4375 [2] LUG  
5. 6D-6547 [2] BEARING  
6. 6D-1886 [2] STOP  
7. 8D-3093 [2] SPACER  
  9D-2185 [2] SHIM 2.54 mm(.1 in.) thick  
  9D-2186 [2] SHIM 1.27 mm(.05 in.) thick  
  6G-3044 CH [1] SEGMENT (circle gear)  
    (7 teeth not shown service, repair for worn or damaged teeth)
  C   INDICATES CHANGE
  H   NOT PART OF 9D6427 POWER BLADE
 

#SEBP10470596
 

8J-5913: VALVE GP

8J5913 PILOT OPERATED CHECK VALVE GROUP
Part of 8D8630 Circle Drive Motor Lines, 9D6420 Blade Shift Lines, 8D8640
Hydraulic Power Blade Lines, 2G1610 Hydraulic Blade Tip Lines & 8D8600
Hydraulic Leaning Wheel Lines shown on Pages 189, 206, 209, 210 & 221
c207401 SEBP1047
8J5913 VALVE GP Parts scheme
  For full view, you need register

Parts for your 130G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9J-0404 [2] PLUG  
  7J-9933 C [2] SEAL  
3. 9J-4871 C [2] BALL  
4. 9J-0403 [2] SPRING  
5. 9J-8285 C [1] BODY ASSEM.  
    (Includes)
6. 9J-5768 [1] PISTON  
7. 9J-0405 [2] SEAT  
  C   INDICATES CHANGE
 

#SEBP10470597
 

2G-3978: CIRCLE AND BEAM ASSEMBLY

2G3978 CIRCLE AND BEAM ASSEMBLY--Type 1
Part of 9D6505 Circle Group shown on Page 187
c172504 SEBP1047
2G3978 CIRCLE AND BEAM ASSEMBLY Parts scheme
  For full view, you need register

Parts for your 130G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7B-5037 [2] LOCK  
2. 6D-4689 [1] BRACE  
3. 2G-3971 [1] BRACKET ASSEM.  
4. 4D-4375 [2] LUG  
5. 6D-6547 [2] BEARING  
6. 6D-1886 [2] STOP  
7. 8D-3093 [2] SPACER  
  9D-2185 [2] SHIM 2.54 mm(.100 in.)thick  
  9D-2186 [2] SHIM 1.27 mm(.050 in.)thick  
8. 7B-5036 [2] SHAFT  
  6G-3044 CH [1] SEGMENT (circle gear)  
    (7 teeth-not shown-service repair for worn or damaged teeth)
  C   INDICATES CHANGE
  H   NOT PART OF 2G3978 CIRCLE AND BEAM ASSEMBLY
 

#SEBP10470598
 

2G-3978: CIRCLE AND BEAM ASSEMBLY

2G3978 CIRCLE AND BEAM ASSEMBLY--Type 2
Part of 9D6505 Circle Group shown on Page 187
c172505 SEBP1047
2G3978 CIRCLE AND BEAM ASSEMBLY Parts scheme
  For full view, you need register

Parts for your 130G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2G-3971 [1] BRACKET ASSEM.  
2. 6D-6547 [2] BEARING  
3. 6D-1886 [2] STOP  
4. 9D-6426 C [1] CIRCLE ASSEM.  
5. 7B-5037 [2] LOCK  
6. 6D-4689 [1] BRACE  
7. 4D-4375 [2] LUG  
8. [2] SPACER  
  9D-2185 [2] SHIM 2.54mm(.1 in.) thick  
  9D-2186 [2] SHIM 1.27mm(.05 in.) thick  
9. 7B-5036 [2] SHAFT  
  6G-3044 CH [1] SEGMENT (circle gear)  
    (7 teeth-not shown-service repair for worn or damaged teeth)
  C   INDICATES CHANGE
  H   NOT PART OF 2G3978 CIRCLE AND
 

#SEBP10470599
 

8D-8630: CIRCLE DRIVE MOTOR LINES GROUP

8D8630 CIRCLE DRIVE MOTOR LINES GROUP
Serial No. 74V588 to 74V835 inclusive
8J5913 Valve parts are shown on Page 188
c152450 SEBP1047
8D8630 CIRCLE DRIVE MOTOR LINES GROUP Parts scheme
  For full view, you need register

Parts for your 130G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 005-4362 C [4] ELBOW  
2. 3K-0360 [15] SEAL  
3. 9D-5968 [1] HOSE ASSEM. (not serv)  
    For service furnish:
  5P-0178 H HOSE 535 cm(210.63 in.)  
  4S-5414 [2] SLEEVE  
  8S-6417 [2] COUPLING ASSEM.  
4. 030-8188 [4] CONNECTOR  
5. 9D-5964 [2] HOSE ASSEM. (not serv)  
    For service of each furnish:
  5P-0178 H HOSE 386 cm(151.97 in.)  
  4S-5414 [2] SLEEVE  
  8S-6393 [1] COUPLING ASSEM. (90 degrees)  
  8S-6417 [1] COUPLING ASSEM. (straight)  
6. 0L-1143 [3] BOLT  
7. 3B-4506 [7] LOCKWASHER  
8. 8J-5913 Y [1] CHECK VALVE GROUP  
    (Separate Illustration)
9. 7D-9984 [5] ELBOW  
10. 9D-5864 [2] HOSE ASSEM. (not serv)  
    For service of each furnish:
  5P-0178 H HOSE 85 cm(33.46 in.)  
  4S-5414 [2] SLEEVE  
  8S-6417 [2] COUPLING ASSEM.  
11. 8D-5258 [1] BLOCK  
  9S-4191 [1] PLUG  
12. 0T-0573 [2] BOLT  
13. 8D-9501 [1] BLOCK  
14. 1A-5822 [2] BOLT  
  3B-4508 [2] LOCKWASHER  
15. 9D-5965 [1] HOSE ASSEM. (not serv)  
    For service furnish:
  5P-0178 H HOSE 156 cm(61.42 in.)  
  4S-5414 [2] SLEEVE  
  2P-0987 [1] COUPLING ASSEM. (str.)  
  2P-1461 [1] COUPLING ASSEM. (90 degrees)  
16. 9D-1221 [2] CLAMP  
17. 0L-1351 [2] BOLT  
18. 030-7962 [2] ELBOW  
19. 030-8189 [2] CONNECTOR  
  3D-2824 [2] SEAL  
20. 3J-1907 [2] SEAL  
21. 9D-5929 [1] HOSE ASSEM. (not serv)  
    For service furnish:
  5P-0178 H HOSE 81 cm(31.89 in.)  
  4S-5414 [2] SLEEVE  
  8S-6417 [2] COUPLING ASSEM.  
22. 030-7948 C [1] ELBOW  
23. 9D-5967 [1] HOSE ASSEM. (not serv)  
    For service furnish:
  5P-0178 H HOSE 168 cm(66.14 in.)  
  4S-5414 [2] SLEEVE  
  8S-6417 [1] COUPLING ASSEM. (str.)  
  8S-6393 [1] COUPLING ASSEM. (90 degrees)  
24. 9D-5966 [1] HOSE ASSEM. (not serv)  
    For service furnish:
  5P-0178 H HOSE 167 cm(65.75 in.)  
  4S-5414 [2] SLEEVE  
  2P-0987 [1] COUPLING ASSEM. (str.)  
  2P-1461 [1] COUPLING ASSEM. (90 degrees)  
25. 2R-6806 C [1] CONNECTOR  
  C   INDICATES CHANGE
  Y   SEPARATE ILLUSTRATION
  H   ORDER BY THE CENTIMETRE
 

Information:

Reuse And Salvage Guidelines
Procedure to Repair Worn Blade Circles for Series G Motor Graders{5207, 6154}
Procedure to Repair Worn Blade Circles for Series G Motor Graders{5207, 6154}

Caterpillar Parts SIS Catalog 130G :

CIRCLE GP
9D-8865 CIRCLE GP
CIRCLE GP
9D-8865 CIRCLE GP
CIRCLE GP
9D-8865 CIRCLE GP
CIRCLE GP
9D-6375 CIRCLE GP
CIRCLE GP
9D-6375 CIRCLE GP
CIRCLE GP
9D-6375 CIRCLE GP
CIRCLE GP
9D-3560 CIRCLE GP
CASE & FRAME GP
2G-9760 CASE & FRAME GP
CIRCLE GP
9D-6505 CIRCLE GP
CIRCLE GP
9D-6505 CIRCLE GP
CIRCLE GP
9D-6505 CIRCLE GP
CIRCLE AS
6G-2900 CIRCLE AS
POWER BLADE AND TIP CIRCLE ASSEMBLY
9D-6427 POWER BLADE AND TIP CIRCLE ASSEMBLY
VALVE GP
8J-5913 VALVE GP
CIRCLE AND BEAM ASSEMBLY
2G-3978 CIRCLE AND BEAM ASSEMBLY
CIRCLE AND BEAM ASSEMBLY
2G-3978 CIRCLE AND BEAM ASSEMBLY

Truck sale:

Caterpillar 130G
 
Caterpillar 130G
- motor graders
PETERSON CAT
 
28.500 
Caterpillar 130G, bergbau-motorgrader, Bau-Und Bergbauausrüstung


Caterpillar 130G, Construction
34,000 
Caterpillar 130G, Construction
- motor graders
PETERSON CAT
 
55,000 
Caterpillar HM 329130G, Construction
- hammer
WHEELER MACHINERY CO.
Caterpillar 130G, Construction
37,883 
Caterpillar 130G, Construction
- motor graders
EMPIRE MACHINERY
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.