AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

6N284 GOVERNOR AND FUEL INJECTION PUMP GROUP--Type 1 Replaced by 4N6116 listed on Page 58D. 6N247 Pump and 6N581 Torque Control parts are shown on Pages 58 & 59 950


FUEL SYSTEM
GOVERNOR GP

WHEEL LOADER 950 WHEEL LOADER 31K
 950 WHEEL LOADER 31K01486-UP (MACHINE) POWERED BY 3304 ENGINE SEBP1048 950 31K   (1968)

FUEL SYSTEM

GOVERNOR GP
GOV & FUEL INJ PUMP GP
6N-0284 GOV & FUEL INJ PUMP GP
GOV & FUEL INJ PUMP GP
6N-0284 GOV & FUEL INJ PUMP GP
COVER GP-GOVERNOR
4N-4510 COVER GP-GOVERNOR
COVER GP-GOVERNOR
4N-4510 COVER GP-GOVERNOR
 

#SEBP10480140
 

6N-0284: GOV & FUEL INJ PUMP GP

6N284 GOVERNOR AND FUEL INJECTION PUMP GROUP--Type 1
Replaced by 4N6116 listed on Page 58D. 6N247 Pump and 6N581 Torque
Control parts are shown on Pages 58 & 59
c154547 SEBP1048
6N0284 GOV & FUEL INJ PUMP GP Parts scheme
  For full view, you need register

Parts for your 950 WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6N-0581 [1] TORQUE CONTROL  
2. Y [1] GOVERNOR & FUEL INJECTION PUMP  
    (Separate Illustration)
3. 4N-0443 [1] PIN  
4. 4N-4228 C [1] SPRING  
  C   INDICATES CHANGE
  Y   SEPARATE ILLUSTRATION
 

#SEBP10480141
 

6N-0284: GOV & FUEL INJ PUMP GP

6N284 GOVERNOR AND FUEL INJECTION PUMP GROUP--Type 2
Replaced by 4N6116 listed on Page 58D. 6N247 Pump and 6N454 Torque Control
parts are shown on Pages 58 and 58F
c223162 SEBP1048
6N0284 GOV & FUEL INJ PUMP GP Parts scheme
  For full view, you need register

Parts for your 950 WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6N-0454 C [1] TORQUE CONTROL GROUP  
2. 6N-0247 YC [1] GOVERNOR & FUEL INJECTION PUMP GROUP  
    (Separate Illustration)
3. 4N-0443 [1] PIN  
4. 4N-4228 [1] SPRING  
  C   INDICATES CHANGE
  Y   SEPARATE ILLUSTRATION
 

#SEBP10480142
 

4N-4510: COVER GP-GOVERNOR

4N4510 GOVERNOR COVER GROUP
Engine Serial No. 78P18799 to 78P55588 inclusive
c144197 SEBP1048
4N4510 COVER GP-GOVERNOR Parts scheme
  For full view, you need register

Parts for your 950 WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2S-7905 [1] PLUG  
2. 4N-4508 [1] COVER  
  4N-4509 [1] GASKET  
3. 0S-1615 [2] BOLT  
 

#SEBP10480143
 

4N-4510: COVER GP-GOVERNOR

4N4510 GOVERNOR COVER GROUP
Engine Serial No. 78P55589-Up
c229520 SEBP1048
4N4510 COVER GP-GOVERNOR Parts scheme
  For full view, you need register

Parts for your 950 WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8N-8082 C [1] COVER  
2. 0S-1615 [2] BOLT  
  5P-0537 C [2] WASHER  
3. 4M-8303 C [1] SEAL-O-RING  
4. 2S-7905 [1] PLUG-PIPE  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP10480144
 

6N-0247: GOV & FUEL INJ PUMP GP

6N247 GOVERNOR AND FUEL INJECTION PUMP GROUP
Part of 6N284 Governor and Fuel Injection Pump Group shown on Page 57
9N867 Control and 4N1834 Pump parts are shown on Pages 59 through 63
c214319 SEBP1048
6N0247 GOV & FUEL INJ PUMP GP Parts scheme
  For full view, you need register

Parts for your 950 WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6L-5773 [1] GASKET  
2. 2M-5471 [2] BOLT  
3. 9N-0867 YC [1] FUEL RATIO CONTROL  
    (Separate Illustration)
4. 4N-0440 [1] LEVER ASSEM.  
    (Includes)
  5S-6458 [1] DOWEL  
5. 4N-4366 [1] SPRING  
6. 2N-2658 [1] BOLT  
7. 7N-0450 C [1] VALVE ASSEM.  
8. 4N-1834 YC [1] FUEL INJECTION PUMP  
    (Separate Illustration)
9. 0S-1615 [11] BOLT  
10. 9S-4180 [1] PLUG  
  4J-7533 [1] SEAL  
11. 4N-4350 [1] COVER  
12. 4N-9056 [1] GASKET  
13. 4N-0444 [2] SPACER  
14. 4N-4320 [1] SHAFT ASSEM.  
15. 4N-0159 [1] GASKET  
16. 6B-4198 [1] BOLT  
17. 4N-5658 [1] PLUG  
18. 4N-5515 [1] ADAPTER  
19. 4B-9365 [1] BOLT 7.62 cm(3 in.) long  
  1B-2718 [1] BOLT 15.24 cm(6 in.) long  
20. 4N-4431 [1] GASKET  
21. 6N-2810 C [1] CHANNEL  
22. 4N-8179 [1] PIN  
23. 9S-4191 [1] PLUG  
  3J-1907 [1] SEAL  
24. 8S-4710 C [1] BOLT  
25. 4N-5490 [1] BASE ASSEM.  
    (Includes)
26. 9S-4167 [1] STUD  
27. 6N-2843 C [1] GASKET  
28. 4N-9336 [1] DISC  
29. 4N-7572 [1] ELBOW  
  4N-9337 [1] GASKET  
30. 9F-6580 [2] BOLT  
31. 8S-4710 [1] BOLT 10.16 cm(4.00 in.) long  
    -OR-
  9F-7022 [1] BOLT 3.81 cm(1.50 in.) long  
  C   INDICATES CHANGE
  Y   SEPARATE ILLUSTRATION
 

#SEBP10480145
 

6N-2477: GOVERNOR AND FUEL INJECTION PUMP GROUP

6N2477 GOVERNOR AND FUEL INJECTION PUMP GROUP
Part of 6N2476 Governor and Fuel Injection Pump Group listed on Pages 58B and 58C
6N509 Control and 4N1834 Pump parts are shown on Pages 58F and 60 thru 63D
c206892 SEBP1048
6N2477 GOVERNOR AND FUEL INJECTION PUMP GROUP Parts scheme
  For full view, you need register

Parts for your 950 WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4N-0053 [1] COVER  
2. 0S-1616 [1] BOLT 1 in. (2.54 cm) long  
  8S-4710 [2] BOLT 4 in. (10.16 cm) long  
3. 4N-0159 [1] GASKET  
4. 4N-4320 [1] SHAFT ASSEM.  
6. 4N-1834 YC [1] GOVERNOR AND FUEL PUMP  
    (Separate Illustration)
7. 6N-2957 C [2] WASHER  
8. 4N-9338 [1] COVER  
  4N-9056 [1] GASKET  
9. 9S-4180 [1] PLUG  
  4J-7533 [1] SEAL  
10. 0S-1615 [8] BOLT  
11. 6D-0238 [1] VALVE ASSEM.  
12. 4N-4366 [1] SPRING  
13. 6N-0509 YC [1] CONTROL GROUP  
    (Separate Illustration)
14. 4N-0443 C [1] PIN  
15. 4N-8179 [1] PIN  
16. 4N-0444 [2] SPACER  
17. 4N-4225 [1] SPRING  
18. 6N-2956 C [1] WASHER (Spring)  
  C   INDICATES CHANGE
  Y   SEPARATE ILLUSTRATION
 

#SEBP10480146
 

6N-2476: GOVERNOR AND FUEL INJECTION PUMP GROUP

6N2476 GOVERNOR AND FUEL INJECTION PUMP GROUP--Type 1
Replaced by 4N6116 shown on Page 58D. Provides Field Replacement for 6N284
Governor and Fuel Injection Pump Group shown on Page 57
SEBP10480146 SEBP1048
  For full view, you need register

Parts for your 950 WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  6N-2477 Y [1] GOVERNOR AND FUEL INJECTION PUMP GROUP  
  2H-3934 [1] SEAL  
  6L-5773 [1] GASKET  
  8L-8601 [6] SPACER .002 (0.05 MM)  
  9L-3625 [1] TORQUE SPRING .022" (0.55 MM)  
  9L-3626 [1] SPACER .016" (0.41 MM)  
  9L-5176 [1] TORQUE SPRING .024" (0.61 MM)  
  9L-6483 [1] TORQUE SPRING .020" (0.52 MM)  
  9L-7235 [3] SHIM .039" (0.99 MM)  
  9L-9347 [2] SHIM .020" (0.52 MM)  
  5M-6214 [1] PLUG  
  4N-0049 [1] GASKET  
  4N-0159 [1] GASKET  
  4N-0402 [1] GASKET  
  4N-0508 [1] GASKET  
  4N-0594 [1] GASKET  
  4N-4227 [1] GOVERNOR SPRING 1.94" (49.18 MM)  
  4N-4228 [1] GOVERNOR SPRING 1.93" (48.96 MM)  
  4N-7777 [3] SPACER .010" (0.25 MM)  
  4N-9056 [1] GASKET  
  4N-9098 [1] SPACER .200" (5.08 MM)  
  4N-9337 [1] GASKET  
  6N-0269 [1] PIN ASSEMBLY  
  6N-2504 [1] SPACER .005" (0.12 MM)  
  6N-2843 [1] GASKET  
  1P-0436 [1] GASKET  
  1P-6453 [1] STOP BAR .250" (6.35 MM)  
  2P-0726 [1] SPRING  
  [1] FILM  
  9S-8597 [1] SPRING  
  Y   SEPARATE ILLUSTRATION
 

#SEBP10480147
 

6N-2476: GOVERNOR AND FUEL INJECTION PUMP GROUP

6N2476 GOVERNOR AND FUEL INJECTION PUMP GROUP--Type 2
Replaced by 4N6116 shown on Page 58D. Provides Field Replacement for 6N284
Governor and Fuel Injection Pump Group shown on Page 57
SEBP10480147 SEBP1048
  For full view, you need register

Parts for your 950 WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  6N-2477 Y [1] GOVERNOR AND FUEL INJECTION PUMP GROUP  
  2H-3934 [1] SEAL  
  6L-5773 [1] GASKET  
  8L-8601 [6] SPACER .002" (0.05 MM)  
  9L-3625 [1] TORQUE SPRING .022" (0.55 MM)  
  9L-3626 [1] SPACER .016" (0.41 MM)  
  9L-5176 [1] TORQUE SPRING .024" (0.61 MM)  
  9L-6483 [1] TORQUE SPRING .020" (0.52 MM)  
  9L-7235 [3] SHIM .039" (0.99 MM)  
  9L-9347 [2] SHIM .020" (0.52 MM)  
  5M-6214 [1] PLUG  
  4N-0049 [1] GASKET  
  4N-0159 [1] GASKET  
  4N-0402 [1] GASKET  
  4N-0508 [1] GASKET  
  4N-0594 [1] GASKET  
  4N-4227 [1] GOVERNOR SPRING 1.94" (49.18 MM)  
  4N-4228 [1] GOVERNOR SPRING 1.93" (48.96 MM)  
  4N-7777 [3] SPACER .010" (0.25 MM)  
  4N-9056 [1] GASKET  
  4N-9098 [1] SPACER .200" (5.08 MM)  
  4N-9337 [1] GASKET  
  6N-2504 [1] SPACER .005" (0.12 MM)  
  6N-2843 [1] GASKET  
  1P-0436 [1] GASKET  
  1P-6453 [1] STOP BAR .250" (6.35 MM)  
  2P-0726 [1] SPRING  
  [1] FILM  
  9S-8597 [1] SPRING  
  Y   SEPARATE ILLUSTRATION
 

#SEBP10480148
 

4N-6116: GOV & FUEL INJ PUMP GP

4N6116 GOVERNOR AND FUEL INJECTION PUMP GROUP--Field Installation
SEBP10480148 SEBP1048
  For full view, you need register

Parts for your 950 WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  4N-6115 Y [1] GOVERNOR AND FUEL INJECTION PUMP GROUP  
  Y   SEPARATE ILLUSTRATION
 

#SEBP10480149
 

4N-6115: GOV & FUEL INJ PUMP GP

4N6115 GOVERNOR AND FUEL INJECTION PUMP GROUP
Part of 4N6116 Governor and Fuel Injection Pump Group listed on Page 58D
6N509 Control and 6N5356 Pump parts are shown on Pages 58F, 63E, 63F, 63G and 63H
c213935 SEBP1048
4N6115 GOV & FUEL INJ PUMP GP Parts scheme
  For full view, you need register

Parts for your 950 WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4N-0053 [1] COVER  
2. 0S-1616 [1] BOLT -2.54 cm(1 in.) long  
3. 8S-4710 [2] BOLT -10.16 cm(4 in.) long  
4. 4N-0159 [1] GASKET  
5. 4N-4320 [1] SHAFT ASSEM.  
6. 6N-5356 Y [1] GOVERNOR AND FUEL PUMP  
    (Separate Illustration)
7. 4N-0444 [2] SPACER  
8. 4N-9338 [1] COVER  
  4N-9056 [1] GASKET  
9. 9S-4180 [1] PLUG  
  4J-7533 [1] SEAL  
10. 0S-1615 [8] BOLT  
11. 7N-0450 C [1] VALVE ASSEM.  
12. 4N-4366 [1] SPRING  
13. 4N-8179 [1] PIN  
14. 6N-0509 Y [1] TORQUE CONTROL GROUP  
    (Separate Illustration)
15. 4N-0443 [1] PIN  
16. 4N-4225 [1] SPRING  
  C   INDICATES CHANGE
  Y   SEPARATE ILLUSTRATION
 

Information:

Special Instruction
Use Of 6V4095 Or 6V4096 Pump And Governor Tool Groups{650, 1250}
Use Of 6V4095 Or 6V4096 Pump And Governor Tool Groups{650, 1250}
Using The 6V4060 Engine Set Point Indicator Group{0781}
Using The 6V4060 Engine Set Point Indicator Group{0781}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Wiring Polarity on Woodward 2301 Governors{1289}
Wiring Polarity on Woodward 2301 Governors{1289}
Installation Of 5P4810 Bearing In Sleeve Metering Fuel Injection Pump Housing{1253}
Installation Of 5P4810 Bearing In Sleeve Metering Fuel Injection Pump Housing{1253}
Installation Of 8N628 Service Replacement Bearing For Rear Of Injection Pump Camshaft In Sleeve Metering Fuel Injection Pump Housing{1253}
Installation Of 8N628 Service Replacement Bearing For Rear Of Injection Pump Camshaft In Sleeve Metering Fuel Injection Pump Housing{1253}
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}
Technical Information Bulletin
3300 Engine Timing Measurement For Reduced Emissions And Improved Engine Performance/Life
3300 Engine Timing Measurement For Reduced Emissions And Improved Engine Performance/Life
Specifications
Governor Control<BR> (Sleeve Metering Fuel System - PC)
3304 VEHICULAR ENGINE
Injection Nozzle (7N449)<BR> (Sleeve Metering Fuel System - DI)
3304 VEHICULAR ENGINE
Governor Control<BR> (Sleeve Metering Fuel System - DI)
3304 VEHICULAR ENGINE
Governor<BR> (Scroll Fuel System - PC)
3304 VEHICULAR ENGINE
Governor Housing<BR> (Scroll Fuel System - DI)
3304 VEHICULAR ENGINE
Injection Nozzle (7N449)<BR> (Scroll Fuel System - DI)
3304 VEHICULAR ENGINE
Governor<BR> (Scroll Fuel System - DI)
3304 VEHICULAR ENGINE
Disassembly and Assembly
Fuel Injection Pump Housing And Governor (Earlier)
3304 VEHICULAR ENGINE FOR 950 WHEEL LOADER
Governor (Earlier)
3304 VEHICULAR ENGINE FOR 950 WHEEL LOADER
Fuel Injection Pump Housing (Earlier)
3304 VEHICULAR ENGINE FOR 950 WHEEL LOADER
Fuel Injection Pump Housing And Governor (Later)
3304 VEHICULAR ENGINE FOR 950 WHEEL LOADER
Fuel Transfer Pump (Earlier)
3304 VEHICULAR ENGINE FOR 950 WHEEL LOADER
Fuel Transfer Pump (Later)
3304 VEHICULAR ENGINE FOR 950 WHEEL LOADER
Fuel Injection Pump Housing And Governor (Later)
3304 VEHICULAR ENGINE FOR 950 WHEEL LOADER
Fuel Injection Pump Housing (Later)
3304 VEHICULAR ENGINE FOR 950 WHEEL LOADER
Governor (Later)
3304 VEHICULAR ENGINE FOR 950 WHEEL LOADER
Fuel Check Valve And Bypass Valve
3304 VEHICULAR ENGINE FOR 950 WHEEL LOADER
Fuel Injection Pumps
3304 VEHICULAR ENGINE FOR 950 WHEEL LOADER
Governor Control Pedal
950 & 966C WHEEL LOADERS OPERATOR'S STATION
Service Magazine
New Fuel Injection Nozzle Assembly Used{1254}
1980/01/21
6V4163 Bit And 6V4164 Driver Now Available For Removal Of Bolts For Flyweight Carrier{0612,1264}
1981/02/23
6V2029 Fixture Group Available For Adjustment Of Air/Fuel Ratio Control {0626,1278,0652}
1981/03/23
FT1585 Plate Can Be Fabricated For Governor Spring Guide Replacement{0626}
1981/04/13
FT1632 Bolt Used During Removal Of Sleeve From Sleeve Metering Fuel System{0621,1251,1253}
1981/08/31
Timing Pin Removed From Governor And Fuel Injection Pump Group; Change To Service Manuals {1286}
1981/09/14
New Torque Specification For Bushing{0374,1253,1251}
1982/01/18
New 6V4180 Off-Engine Lifter Setting Tool Group{0654}
1982/03/01
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator{0651}
1982/08/16
Modification Of 2P8315 Bracket Assembly{0652,1286}
1982/08/16
Instrument Panel Guards Prevent Vandalism (Damage) To Machines{7315}
1982/09/20
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint{1264}
1983/11/07
6V4163 Bit And 6V4164 Driver Now Available For Removal Of Bolts For Flyweight Carrier{0612,1264}
1983/12/05
Check Fuel Injection Nozzles In Overheated Engines{1254}
1985/09/02
Comparison Of Fuel Timing Tolerances For Field Settings{1250,1251,1281}
1985/10/28
Bolt Removed From Governor And Fuel Injection Pump Group{1286,1253,1287}
1985/11/18
New Fuel Ratio Control Group Used On Engines Equipped With New Scroll Fuel System{1278}
1985/11/25
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing{1253}
1986/03/10
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers{1257,1264}
1986/06/09
Changes Have Been Made To OT Microfiche (Fuel Setting And Related Information){1250,1251,1281}
1986/06/16
New Material Used For Disc In Valve Assemblies Of Fuel Transfer Pump Groups{1256}
1986/09/01
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22
Nylon Seals Used On Lockwire To Seal Critical Areas; All Subsidiary Dealers Can Now Order Parts Service Seals {1257,1264}
1986/11/03
Use Correct Contact Point With Dial Indicator To Be Sure Of The Accuracy Of The Measurements Of Fuel Setting And Fuel Ratio Control Setting On Sleeve Metering Fuel Systems{0653,1250}
1977/09/26
Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups{0781}
1987/03/16
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
Improved Guide Pin For Fuel Injection Pump Lifters{1251}
1978/08/21
Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25
Modification To Rack Adjusting Tool Needed For Higher Rack Settings{0654,1257}
1978/10/16
Part Numbers Of Bearings To Use For Service Replacement In Fuel Injection Pump Housings For Sleeve Metering Fuel Systems; Correction To Special Instruction For Installation.{1253}
1979/05/07
9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28
Changes Made To 8S2243 And 8S4613 Wrenches Used On Fuel Injection Pumps{0612,1251}
1979/08/06
New Seal Used Under Retaining Bushing For Fuel Injection Pump Bonnet{1251,1253,1286}
1979/08/13
Tee Handle Hexagonal Wrench In Rack Adjusting Tool Is Now Available For Parts Replacement
1979/09/10
Improvements Made To Fuel Injection Pump And Governor Group{1253,1281}
1979/12/10
New Gaskets Help Prevent Leaks From Fuel System Governors{1264}
1991/12/02
New Components Help Prevent Air Leaks In Improved Fuel Ratio Control Groups{1278}
1992/05/25
New Diaphragm Used In Fuel Ratio Control Groups{1278}
1992/06/15
Different Fuel Filter Available To Prevent Premature Wear On Fuel Injection Pump Plungers And Barrels{1261,1251}
1994/07/11
Tamper Resistant Plugs And Tamper Resistant Bolts Used To Prevent Changes To Fuel Ratio Control (FRC) Setting{1278,1287}
1996/01/22
Governor Spring Guide Press Depth{1287,1284}
1996/01/22
Governor Control Cover Assembly Includes New Seal And Improved Cover {1264}
1997/07/07

Caterpillar Parts SIS Catalog 950 :

GOVERNOR CONTROL GROUP
6K-3790 GOVERNOR CONTROL GROUP
GOVERNOR CONTROL GROUP
6K-3790 GOVERNOR CONTROL GROUP
FASTENER GP-EXHAUST MANIFOLD
4N-9584 FASTENER GP-EXHAUST MANIFOLD
MANIFOLD GP-EXHAUST
2P-6571 MANIFOLD GP-EXHAUST
MUFFLER GP
2P-6247 MUFFLER GP
LINES GP-TURBOCHARGER OIL
4N-3923 LINES GP-TURBOCHARGER OIL
MUFFLER GP
1P-9139 MUFFLER GP
TURBOCHARGER OIL LINES GROUP
6N-5248 TURBOCHARGER OIL LINES GROUP
GOV & FUEL INJ PUMP GP
6N-0284 GOV & FUEL INJ PUMP GP
COVER GP-GOVERNOR
4N-4510 COVER GP-GOVERNOR
COVER GP-GOVERNOR
4N-4510 COVER GP-GOVERNOR
GOV & FUEL INJ PUMP GP
6N-0247 GOV & FUEL INJ PUMP GP
GOVERNOR AND FUEL INJECTION PUMP GROUP
6N-2477 GOVERNOR AND FUEL INJECTION PUMP GROUP
6N-2476 GOVERNOR AND FUEL INJECTION PUMP GROUP
6N-2476 GOVERNOR AND FUEL INJECTION PUMP GROUP
4N-6116 GOV & FUEL INJ PUMP GP

Truck sale:

 
 
Caterpillar 950M, Wheel Loaders, Construction
- Wheel Loaders
WESTERN STATES EQUIPMENT
Caterpillar 950M, Wheel Loaders, Construction
385,000 
Caterpillar 950M, Wheel Loaders, Construction
- Wheel Loaders
WYOMING MACHINERY
Caterpillar 950M, Wheel Loaders, Construction
454,718 
Caterpillar 950M, Wheel Loaders, Construction
- Wheel Loaders
WYOMING MACHINERY
 
167,802 
Caterpillar 950M, Wheel Loaders, Construction
- Wheel Loaders
FINANZAUTO S.A.
 
166,716 
Caterpillar 950M, Wheel Loaders, Construction
- Wheel Loaders
FINANZAUTO S.A.
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.