AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

4N6115 GOVERNOR AND FUEL INJECTION PUMP GROUP--Type 2 Part of 4N6116 Governor and Fuel Injection Pump Group listed on Page 58D. 6N581 Control and 6N5356 Pump parts are shown on Pages 59 & 63E through 63M 950


FUEL SYSTEM
GOVERNOR GP
TORQUE CONTROL GP
CONTROL GP-FUEL RATIO
GOVERNOR GP

WHEEL LOADER 950 WHEEL LOADER 31K
 950 WHEEL LOADER 31K01486-UP (MACHINE) POWERED BY 3304 ENGINE SEBP1048 950 31K   (1968)

FUEL SYSTEM

GOVERNOR GP
4N-6116 GOV & FUEL INJ PUMP GP
GOV & FUEL INJ PUMP GP
4N-6115 GOV & FUEL INJ PUMP GP
GOV & FUEL INJ PUMP GP
4N-6115 GOV & FUEL INJ PUMP GP
GOV & FUEL INJ PUMP GP
4N-1834 GOV & FUEL INJ PUMP GP
GOV & FUEL INJ PUMP GP
4N-1834 GOV & FUEL INJ PUMP GP
GOV & FUEL INJ PUMP GP
4N-1834 GOV & FUEL INJ PUMP GP
 

#SEBP10480150
 

4N-6115: GOV & FUEL INJ PUMP GP

4N6115 GOVERNOR AND FUEL INJECTION PUMP GROUP--Type 2
Part of 4N6116 Governor and Fuel Injection Pump Group listed on Page 58D. 6N581 Control and 6N5356 Pump parts are shown
on Pages 59 & 63E through 63M
c232383 SEBP1048
4N6115 GOV & FUEL INJ PUMP GP Parts scheme
  For full view, you need register

Parts for your 950 WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4N-0053 [1] COVER  
2. 0S-1616 [1] BOLT- 2.54 cm(1 in.) long  
3. 8S-4710 [2] BOLT -10.16 cm(4 in.) long  
4. 4N-0159 [1] GASKET  
5. 4N-4320 [1] SHAFT ASSEM.  
6. 6N-5356 Y [1] GOVERNOR AND FUEL PUMP  
    (Separate Illustration)
7. 4N-0444 [2] SPACER  
8. 7N-2057 C [1] COVER  
  4N-9056 [1] GASKET  
9. 9S-4180 [1] PLUG  
  4J-7533 [1] SEAL  
10. 0S-1615 [8] BOLT  
11. 7N-0450 [1] VALVE ASSEM.  
12. 4N-4366 [1] SPRING  
13. 4N-8179 [1] PIN  
14. 6N-0581 CY [1] TORQUE CONTROL GROUP  
    (Separate Illustration)
15. 4N-0443 [1] PIN  
16. 4N-4225 [1] SPRING  
  C   INDICATES CHANGE
  Y   SEPARATE ILLUSTRATION
 

#SEBP10480151
 

6N-0509: TORQUE CONTROL GP

6N509 TORQUE CONTROL GROUP
Part of 6N2477 and 4N6115 Governor & Fuel Injection Pump Groups
shown on Pages 58A & 58E
c201366 SEBP1048
6N0509 TORQUE CONTROL GP Parts scheme
  For full view, you need register

Parts for your 950 WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1P-6452 [2] INSULATOR  
2. 8M-9064 [1] SHIM-SPRING  
3. 4L-7124 [1] BOLT  
4. 4N-3882 [1] CONTACT-STOP  
5. 4N-3881 [1] SCREW  
6. 9M-1311 [1] NUT-JAM  
7. 4N-3884 [1] WASHER-SPRING  
8. 4N-3883 [1] BAR-LOAD STOP  
9. 4L-6458 [1] NUT-FULL  
 

#SEBP10480152
 

6N-0454: TORQUE CONTROL GP

6N454 TORQUE CONTROL GROUP
Part of 6N284 Governor & Fuel Injection Pump Group shown on Page 57
c201644 SEBP1048
6N0454 TORQUE CONTROL GP Parts scheme
  For full view, you need register

Parts for your 950 WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4L-6458 [1] NUT-FULL  
2. 4L-7124 [1] BOLT  
3. 8M-9064 [1] SHIM-SPRING 1.63MM(.064 IN)THK  
4. 1P-6452 [2] INSULATOR  
5. 4N-3882 [1] CONTACT-STOP  
6. 9L-7235 [3] SHIM-TORQUE SPRING 1.01MM(.039 IN)THK  
7. 4N-7777 [2] SPACER .26MM(.010 IN)THK  
8. 4N-9098 [1] SPACER 12.7MM(.500 IN)THK  
9. 1P-6453 [1] BAR-LOAD STOP  
10. 9L-6483 [1] SPRING-TORQUE .51MM(.020 IN)THK  
11. 8L-8601 [6] SPACER .06MM(.002 IN)THK  
12. 9L-9347 [2] SHIM-TORQUE SPRING .51MM(.020 IN)THK  
 

#SEBP10480153
 

6N-0581: TORQUE CONTROL GP

6N581 TORQUE CONTROL GROUP
Part of 6N284 & 4N6115 Governor and Fuel Injection Pump Group shown on
Pages 56B & 58E-2
c201372 SEBP1048
6N0581 TORQUE CONTROL GP Parts scheme
  For full view, you need register

Parts for your 950 WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4L-6458 [1] NUT-FULL  
2. 4L-7124 [1] BOLT  
3. 8M-9064 [1] SHIM-SPRING (.064IN THK)  
4. 1P-6452 [2] INSULATOR  
5. 4N-3882 [1] CONTACT-STOP  
6. 9L-7235 [3] SHIM-TORQUE SPRING (.039IN THK)  
7. 4N-7777 [3] SPACER (.010IN THK)  
8. 4N-9098 [1] SPACER (.200IN THK)  
9. 1P-6453 [1] BAR-LOAD STOP  
10. 9L-5176 [1] SPRING-TORQUE  
11. 8L-8601 [6] SPACER  
12. 9L-9347 [1] SHIM-TORQUE SPRING  
 

#SEBP10480154
 

9N-0867: CONTROL GP-FUEL RATIO

9N867 FUEL RATIO CONTROL GROUP
Part of 6N247 Governor and Fuel Injection Pump Group shown on Page 58
c149991 SEBP1048
9N0867 CONTROL GP-FUEL RATIO Parts scheme
  For full view, you need register

Parts for your 950 WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6L-5764 [1] COVER  
2. 6L-5766 [1] GASKET  
3. 6N-1606 [1] SPRING  
4. 6L-5769 [1] WASHER  
5. 6N-1603 [1] HOUSING ASSEM.  
    (Includes)
6. 6N-1602 [1] BEARING  
7. 9N-0866 [1] BOLT  
8. 4S-7458 [1] DIAPHRAGM  
9. 2N-5919 [3] BOLT  
10. 4F-7957 [2] BOLT  
11. 5S-6120 [1] RETAINER ASSEM.  
12. 6L-5767 [1] COVER  
13. 2S-4652 [5] WASHER  
14. 5S-6458 [1] PIN  
15. 6N-0968 [1] SPRING  
 

#SEBP10480155
 

4N-1834: GOV & FUEL INJ PUMP GP

4N1834 GOVERNOR AND FUEL INJECTION PUMP GROUP--Part 1 of 4--Type 1
Part of 6N247 and 6N2477 Governor and Fuel Injection Pump Groups shown on Pages 58 and 58A
c207189 SEBP1048
4N1834 GOV & FUEL INJ PUMP GP Parts scheme
  For full view, you need register

Parts for your 950 WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4N-1178 [ 1] HOUSING ASSEM.  
    (Includes)
2. 4N-2333 [ 1] DOWEL  
3. 8S-6814 [ 1] DOWEL  
4. 4N-5050 [ 1] PLUG  
5. 4N-0260 [ 2] SEAL  
6. 6N-2578 C [ 1] BEARING  
7. 4N-2786 [ 1] SEAL  
8. 4N-1723 [ 1] SHIELD  
9. 4N-0425 [ 3] WEIGHT  
10. 4N-2927 [ 2] RACE  
11. 4N-0511 [ 3] DOWEL  
12. 4N-0446 [ 1] CARRIER  
13. 4N-4312 [ 1] CAMSHAFT  
14. 4N-2955 [ 3] BOLT  
15. 4N-2953 [ 1] RING  
16. 4N-2401 [ 1] BEARING  
17. 4N-0434 [ 1] RISER  
18. 4N-9018 C [ 1] SHAFT  
19. 4N-9019 C [ 1] DOWEL  
20. 4N-0507 [ 1] SHAFT ASSEM.  
21. 5M-6509 [ 1] SEAL  
22. 4N-0406 [ 1] GEAR (10 teeth)  
23. 4N-1131 [ 1] BODY ASSEM.  
    (Includes)
24. 8H-9804 [ 1] SHAFT  
25. 4N-0636 [ 1] SEAL  
26. 4N-1584 [ 1] SEAL  
27. 8S-6814 [ 1] DOWEL  
28. 4N-2954 [ 1] SLEEVE  
29. 4N-3779 [ 1] KEY  
30. 4N-0429 [ 1] GEAR (15 teeth)  
31. 4N-0527 [ 1] SPRING  
32. 4N-0435 [ 1] SEAT  
33. 4N-0436 [ 1] SEAT  
34. 4N-0927 [ 1] SHAFT ASSEM.  
    INDICATES CHANGE
 

#SEBP10480156
 

4N-1834: GOV & FUEL INJ PUMP GP

4N1834 GOVERNOR AND FUEL INJECTION PUMP GROUP--Part 2 of 4--Type 1
Part of 6N247 and 6N2477 Governor and Fuel Injection Pump groups shown on Pages 58 and 58A
c223900 SEBP1048
4N1834 GOV & FUEL INJ PUMP GP Parts scheme
  For full view, you need register

Parts for your 950 WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4N-6430 [1] PIN  
2. 3B-8695 [1] BOLT 88.9 mm(3.50 in.) long  
3. 2A-4781 [1] BOLT 69.8 mm(2.75 in.) long  
4. 6N-1346 C [1] HOUSING ASSEM.  
    (Includes)
5. 4N-2333 [1] PIN  
6. 4N-1826 [1] DOWEL  
  2D-6392 [1] SEAL  
7. 6N-5325 C [4] PIN  
8. 1P-2298 [1] VALVE ASSEM.  
9. 6N-0343 C [1] STUD  
10. 6N-1078 C [1] BEARING  
11. 8N-0628 C [1] BEARING  
12. 4N-2954 [1] SLEEVE  
13. 1P-4001 [1] FITTING  
14. 4N-0054 [1] SCREW  
  5B-3180 [1] NUT  
15. 1P-2497 [2] BOLT  
16. 4N-0009 [1] COVER  
  4N-0049 [1] GASKET  
17. 1P-9925 [1] BOLT  
  2S-4652 [1] WASHER  
18. 4N-0594 [1] GASKET  
19. 0S-1616 [2] BOLT 25.4 mm(1 in.) long  
  1P-9925 C [1] BOLT 63.5 mm(2.5 in.) long  
20. 9S-8632 [1] SPRING  
21. 4N-0116 [1] GUIDE  
22. 5J-5314 [4] BOLT  
  C   INDICATES CHANGE
 

#SEBP10480157
 

4N-1834: GOV & FUEL INJ PUMP GP

4N1834 GOVERNOR AND FUEL INJECTION PUMP GROUP--Part 3 of 4--Type 1
Part of 6N247 and 6N2477 Governor and Fuel Injection Pump Groups
shown on Pages 58 and 58A
c207191 SEBP1048
4N1834 GOV & FUEL INJ PUMP GP Parts scheme
  For full view, you need register

Parts for your 950 WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4N-0209 [ 4] BONNET  
2. 4N-0218 [ 4] BUSHING  
3. 9B-1320 C [ 4] VALVE  
  9L-9424 [ 4] SPRING  
4. 4N-0224 [ 4] RING  
5. 4N-1765 [ 4] PLUNGER & BARREL ASSEM.  
6. 4N-4318 [ 4] SPRING  
7. 4N-2728 [ 4] WASHER  
8. 4N-1750 [ 4] LIFTER  
  4N-2685 [ 4] ROLLER  
9. 2N-2658 [ 4] SCREW  
10. 4N-1763 [ 4] LEVER  
11. 4N-0528 [ 1] SHAFT  
12. 4N-2677 [ 1] LEVER ASSEM.  
13. 2M-7819 [ 1] RING  
14. 3H-0442 [ 1] SEAL  
15. 4N-0508 [ 1] GASKET  
16. 2M-5471 C [ 1] BOLT  
17. 4N-1591 [ 1] COVER ASSEM.  
  4N-0506 [ 1] COVER  
18. 4N-1594 [ 1] MACHINE SCREW  
  4B-2042 [ 1] NUT  
  3B-4501 [ 1] LOCKWASHER  
  1P-7326 [ 1] WASHER 1.52 mm(.06 in.) thick  
  8F-1326 [ 1] WASHER 82 mm(.032 in.) thick  
19. 2M-5471 [ 1] BOLT  
20. 2P-3200 [ 1] BOLT  
  1J-9671 [ 1] SEAL  
21. 4N-0523 [ 1] DOWEL  
  2D-6392 [ 1] SEAL  
22. 4N-0445 [ 1] LEVER  
    INDICATES CHANGE
 

#SEBP10480158
 

4N-1834: GOV & FUEL INJ PUMP GP

4N1834 GOVERNOR AND FUEL INJECTION PUMP GROUP--Part 4 of 4--Type 1
Part of 6N247 and 6N2477 Governor and Fuel Injection Pump Groups shown on Pages 58 and 58A
c161567 SEBP1048
4N1834 GOV & FUEL INJ PUMP GP Parts scheme
  For full view, you need register

Parts for your 950 WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4N-1881 [1] LEVER  
2. 4N-0448 [1] LEVER ASSEM.  
    (Includes)
  9L-8571 [1] DOWEL  
3. 8F-5368 [1] WASHER  
4. 9S-8601 [1] PIN  
5. 4N-1767 [1] VALVE  
6. 4N-0605 [1] SPRING  
7. 4N-0613 [2] PLATE  
9. 4N-0687 [1] COVER ASSEM.  
    (Includes)
10. 4N-2786 C [1] SEAL  
12. 0S-1616 [4] BOLT  
13. 4N-0402 [1] GASKET  
  C   INDICATES CHANGE
 

#SEBP10480159
 

4N-1834: GOV & FUEL INJ PUMP GP

4N1834 GOVERNOR AND FUEL INJECTION PUMP GROUP--Part 1 of 4--Type 2
Part of 6N247 and 6N2477 Governor and Fuel Injection Pump Groups shown on Pages 58 and 58A
c214674 SEBP1048
4N1834 GOV & FUEL INJ PUMP GP Parts scheme
  For full view, you need register

Parts for your 950 WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4N-2954 [1] SLEEVE  
2. 4N-3779 [1] KEY  
3. 4N-0429 [1] GEAR (15 teeth)  
4. 4N-0527 [1] SPRING  
5. 4N-0435 [1] SEAT  
6. 6N-7451 C [1] SEAT  
7. 4N-0927 [1] SHAFT ASSEM.  
8. 6N-2957 C [2] WASHER  
9. 6N-2956 C [1] WASHER  
10. 4N-2927 [2] RACE  
11. 4N-0511 [3] DOWEL  
12. 4N-0446 [1] CARRIER  
13. 6N-6567 [1] CAMSHAFT  
14. 4N-2955 [3] BOLT  
15. 4N-2953 [1] RING  
16. 4N-2401 [1] BEARING  
17. 4N-0434 [1] RISER  
18. 4N-9018 [1] SHAFT  
19. 4N-9019 [1] DOWEL  
20. 4N-0507 [1] SHAFT ASSEM.  
21. 5M-6509 [1] SEAL  
22. 4N-0406 [1] GEAR (10 teeth)  
23. 4N-1131 [1] BODY ASSEM.  
    (Includes)
24. 8H-9804 [1] SHAFT  
25. 4N-0636 [1] SEAL  
26. 4N-1584 [1] SEAL  
27. 8S-6814 [1] DOWEL  
28. 4N-1723 [1] SHIELD  
29. 4N-0425 [3] WEIGHT  
30. 4N-1178 [1] HOUSING ASSEM.  
    (Includes)
31. 4N-2333 [1] DOWEL  
32. 8S-6814 [1] DOWEL  
33. 4N-5050 [1] PLUG  
34. 4N-0260 [2] SEAL  
35. 6N-2578 [1] BEARING  
36. 4N-2786 [1] SEAL  
37. 9S-4180 C [1] PLUG  
  4J-7533 C [1] SEAL  
  C   INDICATES CHANGE
 

Information:

Special Instruction
Use Of 6V4095 Or 6V4096 Pump And Governor Tool Groups{650, 1250}
Use Of 6V4095 Or 6V4096 Pump And Governor Tool Groups{650, 1250}
Using The 6V4060 Engine Set Point Indicator Group{0781}
Using The 6V4060 Engine Set Point Indicator Group{0781}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Wiring Polarity on Woodward 2301 Governors{1289}
Wiring Polarity on Woodward 2301 Governors{1289}
Installation Of 5P4810 Bearing In Sleeve Metering Fuel Injection Pump Housing{1253}
Installation Of 5P4810 Bearing In Sleeve Metering Fuel Injection Pump Housing{1253}
Installation Of 8N628 Service Replacement Bearing For Rear Of Injection Pump Camshaft In Sleeve Metering Fuel Injection Pump Housing{1253}
Installation Of 8N628 Service Replacement Bearing For Rear Of Injection Pump Camshaft In Sleeve Metering Fuel Injection Pump Housing{1253}
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}
Technical Information Bulletin
3300 Engine Timing Measurement For Reduced Emissions And Improved Engine Performance/Life
3300 Engine Timing Measurement For Reduced Emissions And Improved Engine Performance/Life
Specifications
Governor Control<BR> (Sleeve Metering Fuel System - PC)
3304 VEHICULAR ENGINE
Injection Nozzle (7N449)<BR> (Sleeve Metering Fuel System - DI)
3304 VEHICULAR ENGINE
Governor Control<BR> (Sleeve Metering Fuel System - DI)
3304 VEHICULAR ENGINE
Governor<BR> (Scroll Fuel System - PC)
3304 VEHICULAR ENGINE
Governor Housing<BR> (Scroll Fuel System - DI)
3304 VEHICULAR ENGINE
Injection Nozzle (7N449)<BR> (Scroll Fuel System - DI)
3304 VEHICULAR ENGINE
Governor<BR> (Scroll Fuel System - DI)
3304 VEHICULAR ENGINE
Disassembly and Assembly
Fuel Injection Pump Housing And Governor (Earlier)
3304 VEHICULAR ENGINE FOR 950 WHEEL LOADER
Governor (Earlier)
3304 VEHICULAR ENGINE FOR 950 WHEEL LOADER
Fuel Injection Pump Housing (Earlier)
3304 VEHICULAR ENGINE FOR 950 WHEEL LOADER
Fuel Injection Pump Housing And Governor (Later)
3304 VEHICULAR ENGINE FOR 950 WHEEL LOADER
Fuel Transfer Pump (Earlier)
3304 VEHICULAR ENGINE FOR 950 WHEEL LOADER
Fuel Transfer Pump (Later)
3304 VEHICULAR ENGINE FOR 950 WHEEL LOADER
Fuel Injection Pump Housing And Governor (Later)
3304 VEHICULAR ENGINE FOR 950 WHEEL LOADER
Fuel Injection Pump Housing (Later)
3304 VEHICULAR ENGINE FOR 950 WHEEL LOADER
Governor (Later)
3304 VEHICULAR ENGINE FOR 950 WHEEL LOADER
Fuel Check Valve And Bypass Valve
3304 VEHICULAR ENGINE FOR 950 WHEEL LOADER
Fuel Injection Pumps
3304 VEHICULAR ENGINE FOR 950 WHEEL LOADER
Governor Control Pedal
950 & 966C WHEEL LOADERS OPERATOR'S STATION
Service Magazine
New Fuel Injection Nozzle Assembly Used{1254}
1980/01/21
6V4163 Bit And 6V4164 Driver Now Available For Removal Of Bolts For Flyweight Carrier{0612,1264}
1981/02/23
6V2029 Fixture Group Available For Adjustment Of Air/Fuel Ratio Control {0626,1278,0652}
1981/03/23
FT1585 Plate Can Be Fabricated For Governor Spring Guide Replacement{0626}
1981/04/13
FT1632 Bolt Used During Removal Of Sleeve From Sleeve Metering Fuel System{0621,1251,1253}
1981/08/31
Timing Pin Removed From Governor And Fuel Injection Pump Group; Change To Service Manuals {1286}
1981/09/14
New Torque Specification For Bushing{0374,1253,1251}
1982/01/18
New 6V4180 Off-Engine Lifter Setting Tool Group{0654}
1982/03/01
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator{0651}
1982/08/16
Modification Of 2P8315 Bracket Assembly{0652,1286}
1982/08/16
Instrument Panel Guards Prevent Vandalism (Damage) To Machines{7315}
1982/09/20
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint{1264}
1983/11/07
6V4163 Bit And 6V4164 Driver Now Available For Removal Of Bolts For Flyweight Carrier{0612,1264}
1983/12/05
Check Fuel Injection Nozzles In Overheated Engines{1254}
1985/09/02
Comparison Of Fuel Timing Tolerances For Field Settings{1250,1251,1281}
1985/10/28
Bolt Removed From Governor And Fuel Injection Pump Group{1286,1253,1287}
1985/11/18
New Fuel Ratio Control Group Used On Engines Equipped With New Scroll Fuel System{1278}
1985/11/25
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing{1253}
1986/03/10
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers{1257,1264}
1986/06/09
Changes Have Been Made To OT Microfiche (Fuel Setting And Related Information){1250,1251,1281}
1986/06/16
New Material Used For Disc In Valve Assemblies Of Fuel Transfer Pump Groups{1256}
1986/09/01
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22
Nylon Seals Used On Lockwire To Seal Critical Areas; All Subsidiary Dealers Can Now Order Parts Service Seals {1257,1264}
1986/11/03
Use Correct Contact Point With Dial Indicator To Be Sure Of The Accuracy Of The Measurements Of Fuel Setting And Fuel Ratio Control Setting On Sleeve Metering Fuel Systems{0653,1250}
1977/09/26
Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups{0781}
1987/03/16
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
Improved Guide Pin For Fuel Injection Pump Lifters{1251}
1978/08/21
Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25
Modification To Rack Adjusting Tool Needed For Higher Rack Settings{0654,1257}
1978/10/16
Part Numbers Of Bearings To Use For Service Replacement In Fuel Injection Pump Housings For Sleeve Metering Fuel Systems; Correction To Special Instruction For Installation.{1253}
1979/05/07
9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28
Changes Made To 8S2243 And 8S4613 Wrenches Used On Fuel Injection Pumps{0612,1251}
1979/08/06
New Seal Used Under Retaining Bushing For Fuel Injection Pump Bonnet{1251,1253,1286}
1979/08/13
Tee Handle Hexagonal Wrench In Rack Adjusting Tool Is Now Available For Parts Replacement
1979/09/10
Improvements Made To Fuel Injection Pump And Governor Group{1253,1281}
1979/12/10
New Gaskets Help Prevent Leaks From Fuel System Governors{1264}
1991/12/02
New Components Help Prevent Air Leaks In Improved Fuel Ratio Control Groups{1278}
1992/05/25
New Diaphragm Used In Fuel Ratio Control Groups{1278}
1992/06/15
Different Fuel Filter Available To Prevent Premature Wear On Fuel Injection Pump Plungers And Barrels{1261,1251}
1994/07/11
Tamper Resistant Plugs And Tamper Resistant Bolts Used To Prevent Changes To Fuel Ratio Control (FRC) Setting{1278,1287}
1996/01/22
Governor Spring Guide Press Depth{1287,1284}
1996/01/22
Governor Control Cover Assembly Includes New Seal And Improved Cover {1264}
1997/07/07

Caterpillar Parts SIS Catalog 950 :

GOV & FUEL INJ PUMP GP
4N-6115 GOV & FUEL INJ PUMP GP
4N-6116 GOV & FUEL INJ PUMP GP
6N-2476 GOVERNOR AND FUEL INJECTION PUMP GROUP
6N-2476 GOVERNOR AND FUEL INJECTION PUMP GROUP
GOVERNOR AND FUEL INJECTION PUMP GROUP
6N-2477 GOVERNOR AND FUEL INJECTION PUMP GROUP
GOV & FUEL INJ PUMP GP
6N-0247 GOV & FUEL INJ PUMP GP
COVER GP-GOVERNOR
4N-4510 COVER GP-GOVERNOR
COVER GP-GOVERNOR
4N-4510 COVER GP-GOVERNOR
TORQUE CONTROL GP
6N-0509 TORQUE CONTROL GP
TORQUE CONTROL GP
6N-0454 TORQUE CONTROL GP
TORQUE CONTROL GP
6N-0581 TORQUE CONTROL GP
CONTROL GP-FUEL RATIO
9N-0867 CONTROL GP-FUEL RATIO
GOV & FUEL INJ PUMP GP
4N-1834 GOV & FUEL INJ PUMP GP
GOV & FUEL INJ PUMP GP
4N-1834 GOV & FUEL INJ PUMP GP
GOV & FUEL INJ PUMP GP
4N-1834 GOV & FUEL INJ PUMP GP
GOV & FUEL INJ PUMP GP
4N-1834 GOV & FUEL INJ PUMP GP

Truck sale:

 
 
Caterpillar 950M, Wheel Loaders, Construction
- Wheel Loaders
WESTERN STATES EQUIPMENT
Caterpillar 950M, Wheel Loaders, Construction
385,000 
Caterpillar 950M, Wheel Loaders, Construction
- Wheel Loaders
WYOMING MACHINERY
Caterpillar 950M, Wheel Loaders, Construction
454,718 
Caterpillar 950M, Wheel Loaders, Construction
- Wheel Loaders
WYOMING MACHINERY
 
167,802 
Caterpillar 950M, Wheel Loaders, Construction
- Wheel Loaders
FINANZAUTO S.A.
 
166,716 
Caterpillar 950M, Wheel Loaders, Construction
- Wheel Loaders
FINANZAUTO S.A.
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.