AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

2V7533 LIFT CYLINDER GUARD GROUP--Type 2 AN ATTACHMENT 950 WHEEL LOADER


HYDRAULIC SYSTEM
CYLINDER GP
OPERATOR STATION
PROTECTION GP-VANDALISM
FRAME AND BODY
COUNTERWEIGHT GP
DRAWBAR GP
HITCH GP
FENDER GP
HYDRAULIC SYSTEM
HYDRAULIC GP

WHEEL LOADER 950 WHEEL LOADER 31K
 950 WHEEL LOADER 31K01486-UP (MACHINE) POWERED BY 3304 ENGINE SEBP1048 950 31K   (1968)

HYDRAULIC SYSTEM

CYLINDER GP
GUARD GP-CYLINDER
2V-7533 GUARD GP-CYLINDER
GUARD GP-CYLINDER
2V-7533 GUARD GP-CYLINDER
CYLINDER GP-LIFT
7J-9690 CYLINDER GP-LIFT
CYLINDER GP-LIFT
7J-9690 CYLINDER GP-LIFT
TILT CYLINDER GROUP
7J-9695 TILT CYLINDER GROUP
 

#SEBP10480570
 

2V-7533: GUARD GP-CYLINDER

2V7533 LIFT CYLINDER GUARD GROUP--Type 2
AN ATTACHMENT
c181554 SEBP1048
2V7533 GUARD GP-CYLINDER Parts scheme
  For full view, you need register

Parts for your 950 WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5J-2094 [2] STOP  
2. 4D-2328 [2] BLOCK  
3. 0S-1585 C [17] BOLT  
4. 3B-4508 [5] LOCKWASHER  
5. 9H-4257 C [2] WASHER  
6. 1V-7350 [1] COVER  
7. 1F-7960 [8] WASHER  
8. 1V-7354 [4] BAR  
9. 2V-7485 [1] GUARD ASSEM.  
    (Includes)
  1F-0748 C [1] NUT  
10. 5P-8245 C [4] WASHER  
  C   INDICATES CHANGE
 

#SEBP10480571
 

9K-3438: GUARD GP-VANDALISM

9K3438 VANDALISM GUARD GROUP
AN ATTACHMENT
c114018 SEBP1048
9K3438 GUARD GP-VANDALISM Parts scheme
  For full view, you need register

Parts for your 950 WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. [1] COVER ASSEM.  
2. [2] PLATE  
  [6] RIVET  
3. [2] BOLT  
  [2] NUT  
  [4] WASHER  
4. [1] PADLOCK GROUP  
  [2] KEY  
 

#SEBP10480572
 

5K-1617: COUNTERWEIGHT GROUP

5K1617 COUNTERWEIGHT GROUP--1640 Pounds
FOR USE WITH LUMBER FORK AND LOG FORK. AN ATTACHMENT
SEBP10480572 SEBP1048
  For full view, you need register

Parts for your 950 WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  5K-1616 Y [1] SIDE COUNTERWEIGHT GROUP  
  5K-2463 Y [1] REAR COUNTERWEIGHT GROUP  
  Y   SEPARATE ILLUSTRATION
 

#SEBP10480573
 

5K-1616: COUNTERWEIGHT GROUP

5k1616 COUNTERWEIGHT GROUP--740 Pounds
FOR USE WITH SIDE DUMP BUCKET OR MULTI-PURPOSE BUCKET
Also part of 5K1617 Counterweight Group. AN ATTACHMENT
c203045 SEBP1048
5K1616 COUNTERWEIGHT GROUP Parts scheme
  For full view, you need register

Parts for your 950 WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  5K-2464 [2] COUNTERWEIGHT  
  5K-2461 [2] PLATE ASSEM.  
  1D-5976 [4] BOLT  
  4B-4284 [4] WASHER  
 

#SEBP10480574
 

5K-2463: REAR COUNTERWEIGHT GROUP

5K2463 REAR COUNTERWEIGHT GROUP--900 Pounds
Part of 5K1617 Counterweight Group. AN ATTACHMENT
c207711 SEBP1048
5K2463 REAR COUNTERWEIGHT GROUP Parts scheme
  For full view, you need register

Parts for your 950 WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  5K-0901 [1] COUNTERWEIGHT  
  1D-4614 [4] BOLT  
  1B-4331 [4] NUT  
  3B-4512 [4] LOCKWASHER  
  1B-4331 [4] NUT  
  3B-4512 [4] LOCKWASHER  
  7M-2360 C [4] WASHER  
  9S-1323 [4] STUD  
  5K-0101 [2] BLOCK  
  5K-2460 [2] PLATE  
  C   INDICATES CHANGE
 

#SEBP10480575
 

5K-2063: DRAWBAR GROUP

5K2063 DRAWBAR GROUP
c143342 SEBP1048
5K2063 DRAWBAR GROUP Parts scheme
  For full view, you need register

Parts for your 950 WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  7K-8551 C [1] PIN ASSEM.  
  5K-1841 C [1] BAR  
  1A-8063 C [6] BOLT  
  3B-4512 [6] LOCKWASHER  
  3K-0619 [1] PIN  
    (Part of 7K8551 Assem.)
  4K-8593 [1] WASHER  
    (Part of 7K8551 Assem.)
  4K-7823 [1] DRAWBAR ASSEM.  
  C   INDICATES CHANGE
 

#SEBP10480576
 

9K-2473: ARTICULATED HITCH GROUP

9K2473 ARTICULATED HITCH GROUP
c222101 SEBP1048
9K2473 ARTICULATED HITCH GROUP Parts scheme
  For full view, you need register

Parts for your 950 WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1A-1460 [4] BOLT  
2. 5P-8245 C [19] WASHER  
3. 0S-1587 [2] BOLT  
4. 2B-7557 [2] CORK  
5. 5K-0609 [1] COVER  
6. 2V-4331 C [1] COLLAR  
7. 5K-0984 [1] BEARING  
8. 5K-0990 [1] PIN  
9. 5K-0983 [2] SEAL  
10. 5K-0871 [1] PIN  
11. 5K-0987 [1] SPACER  
12. 5K-0989 [1] CAP  
13. 3B-8489 [1] FITTING  
14. 5K-0988 [1] SHIM  
15. 5K-0985 [1] BEARING ASSEM.  
16. 5K-0991 [1] CAP  
17. 1D-4569 [7] BOLT  
18. 7B-3235 [6] BOLT  
19. 4V-0015 C [1] PLATE  
20. 0S-1589 [4] BOLT  
  5P-8247 C [4] WASHER  
21. 4K-6781 [1] SPACER  
22. 4K-7464 [1] SHIM  
  C   INDICATES CHANGE
 

#SEBP10480577
 

9K-5445: FENDER GROUP

9K5445 FENDER GROUP
Serial No. 81J7846 to 81J8692, 81J8695, 81J8697 to 81J8714, 81J8716 to 81J8733 inclusive
and 31K1486 to 31K1649 inclusive
c157239 SEBP1048
9K5445 FENDER GROUP Parts scheme
  For full view, you need register

Parts for your 950 WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  1A-2029 [5] BOLT  
  1D-4717 [5] NUT  
  5P-1075 C [5] WASHER  
  1V-3503 C [1] STEP ASSEM. (L.H.)  
  9K-5441 [1] FENDER ASSEM. (L.H.-Rear)  
  9F-2978 [1] NUT  
    (Part of 9K5441 Assem.)
  0L-1351 [7] BOLT  
  1D-4717 C [3] NUT  
  5P-1075 C [7] WASHER  
  6H-1717 [4] BOLT  
  3B-4508 [4] LOCKWASHER  
  4B-4280 [4] WASHER  
  4K-8552 [1] SHIM  
  CH 3.56 dm(14 in.) TREAD  
  CH 3.56 DM(14 IN.) TREAD  
  4K-8552 [1] SHIM  
  6H-1717 [4] BOLT  
  3B-4508 [4] LOCKWASHER  
  4B-4280 [4] WASHER  
  1V-3504 C [1] STEP ASSEM. (R.H.)  
  0L-1351 [7] BOLT  
  1D-4717 C [3] NUT  
  5P-1075 C [7] WASHER  
  9K-5442 [1] FENDER ASSEM. (R.H.-Rear)  
  9F-2978 [1] NUT  
    (Part of 9K5442 Assem.)
  1A-2029 [5] BOLT  
  1D-4717 [5] NUT  
  5P-1075 [5] WASHER  
  1A-2029 [2] BOLT  
  5P-1075 C [2] WASHER  
  9F-2978 [2] NUT  
    (Part of 1V3503 Assem.)
  2B-7559 [1] CORK  
  2B-7559 [1] CORK  
  1A-2029 [2] BOLT  
  5P-1075 C [2] WASHER  
  9F-2978 [2] NUT  
    (Part of 1V3504 Assem.)
  6K-1944 [1] FENDER ASSEM. (Left Hand Front)  
  1D-4717 [16] NUT  
  3B-4508 [16] LOCKWASHER  
  4B-4280 [16] WASHER  
    (Mounted on Load Frame Assem.)
  6K-1943 [1] FENDER ASSEM. (Right Hand)  
  C   INDICATES CHANGE
  H   ORDER BY THE DECIMETRE
 

#SEBP10480578
 

9K-5445: FENDER GROUP

9K5445 FENDER GROUP
Serial No. 81J8693, 81J8694, 81J8696, 81J8715 and 81J8734-Up and 31K1650-Up
c159259 SEBP1048
9K5445 FENDER GROUP Parts scheme
  For full view, you need register

Parts for your 950 WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  1A-2029 C [3] BOLT  
  1D-4717 C [3] NUT  
  5P-1075 C [6] WASHER  
  9K-5441 [1] FENDER ASSEM. (L.H.-Rear)  
  9F-2978 [1] NUT  
    (Part of 9K5441 Assem.)
  6H-1717 [4] BOLT  
  5P-1076 C [4] WASHER  
  4K-8552 [1] SHIM  
  4K-8552 [1] SHIM  
  6H-1717 [4] BOLT  
  5P-1076 C [4] WASHER  
  9K-5442 [1] FENDER ASSEM. (R.H.-Rear)  
  9F-2978 [1] NUT  
    (Part of 9K5442 Assem.)
  1A-2029 C [3] BOLT  
  1D-4717 C [3] NUT  
  5P-1075 C [6] WASHER  
  6K-1944 [1] FENDER ASSEM. (Left Hand Front)  
  1D-4717 [16] NUT  
  5P-1076 C [16] WASHER  
    (Mounted on Loader Frame)
  6K-1943 [1] FENDER ASSEM. (Right Hand)  
  C   INDICATES CHANGE
 

#SEBP10480579
 

8K-5553: HYDRAULIC ARRANGEMENT

8K5553 HYDRAULIC ARRANGEMENT 3 VALVE--FOR USE WITH FRONT ATTACHMENT
SEBP10480579 SEBP1048
  For full view, you need register

Parts for your 950 WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  8J-0163 Y [1] HYDRAULIC TANK & VALVE GROUP  
  5K-2681 Y [1] HYDRAULIC VALVE CONTROL GROUP  
  7K-9376 Y [1] FRONT HYDRAULIC LINES GROUP  
    - OR -
  4V-4765 Y [1] FRONT HYDRAULIC LINES GROUP  
  Y   SEPARATE ILLUSTRATION
 

Information:

Special Instruction
Installation Of Tilt Cylinder Link Assembly Oversize Bearings{6119}
Installation Of Tilt Cylinder Link Assembly Oversize Bearings{6119}
Installation Of Tilt Cylinder Link Assembly Oversize Bearings{6119}
Installation Of Tilt Cylinder Link Assembly Oversize Bearings{6119}
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Technical Information Bulletin
The Failure of the Buffer Seal that can be Caused by a Defect in the Seal Groove on All Track-Type Tractors, Wheel Loaders, Hydraulic Excavators and Backhoe Loaders that Use Cylinders that were Manufactured After 1January 2000{7562}
The Failure of the Buffer Seal that can be Caused by a Defect in the Seal Groove on All Track-Type Tractors, Wheel Loaders, Hydraulic Excavators and Backhoe Loaders that Use Cylinders that were Manufactured After 1January 2000{7562}
Surface Finishes of Cylinder Bores{7562}
Surface Finishes of Cylinder Bores{7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Specifications
Cylinders
950 WHEEL LOADER
Tool Operating Manual
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Reuse And Salvage Guidelines
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
Contamination Control Guidelines
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Applied Failure Analysis
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Bench Test Procedures
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Disassembly and Assembly
Bucket Positioner Master Cylinder
950 WHEEL LOADER VEHICLE SYSTEMS
Lift Cylinders
950 WHEEL LOADER VEHICLE SYSTEMS
Tilt Cylinders
950 WHEEL LOADER VEHICLE SYSTEMS
Lift And Tilt Cylinder Bearings
950 WHEEL LOADER VEHICLE SYSTEMS
Service Magazine
Use Earlier Rod Bearings For Lift Cylinders To Prevent Failures{5102}
1978/12/04
New Backup Rings Are Available for Sealing Hydraulic Cylinders with Pitted Grooves {4303, 5102, 5104, 5106, 5456, 7562}
2002/07/01
New Seals and Backup Rings for Hydraulic Cylinders are Available {4303, 5102, 5104, 7562}
2001/08/06
New Assembly Instructions for Rod Seals on Hydraulic Cylinders are Available {7562}
2001/07/30
Correctly Assembling the Buffer Seal Will Prevent Failure of the U-Cup Seals {7562}
2001/07/30
Double Lip Wiper Seals Must Be Installed Properly {7562}
2002/12/09
Procedure Now Available to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
2013/02/28
Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
2011/10/17
A Rework Procedure Improves the Seal Assembly Performance in Hydraulic Cylinders on Cat Products {7562}
2010/04/30

Caterpillar Parts SIS Catalog 950 :

GUARD GP-TANK
7K-0129 GUARD GP-TANK
GUARD GP-CYLINDER
2V-7533 GUARD GP-CYLINDER
GUARD GP-DRIVE SHAFT
3V-5890 GUARD GP-DRIVE SHAFT
HOOD AND GUARD GROUP
4V-4347 HOOD AND GUARD GROUP
HOOD AND GUARD GROUP
5K-2002 HOOD AND GUARD GROUP
HOOD AND GUARD GROUP
5K-2002 HOOD AND GUARD GROUP
TRACTOR GUARD GROUP
6K-9738 TRACTOR GUARD GROUP
FRONT GUARD GROUP
5K-2030 FRONT GUARD GROUP
GUARD GP-VANDALISM
9K-3438 GUARD GP-VANDALISM
5K-1617 COUNTERWEIGHT GROUP
COUNTERWEIGHT GROUP
5K-1616 COUNTERWEIGHT GROUP
REAR COUNTERWEIGHT GROUP
5K-2463 REAR COUNTERWEIGHT GROUP
DRAWBAR GROUP
5K-2063 DRAWBAR GROUP
ARTICULATED HITCH GROUP
9K-2473 ARTICULATED HITCH GROUP
FENDER GROUP
9K-5445 FENDER GROUP
FENDER GROUP
9K-5445 FENDER GROUP

Truck sale:

 
 
Caterpillar 950M, Wheel Loaders, Construction
- Wheel Loaders
WESTERN STATES EQUIPMENT
Caterpillar 950M, Wheel Loaders, Construction
385,000 
Caterpillar 950M, Wheel Loaders, Construction
- Wheel Loaders
WYOMING MACHINERY
Caterpillar 950M, Wheel Loaders, Construction
454,718 
Caterpillar 950M, Wheel Loaders, Construction
- Wheel Loaders
WYOMING MACHINERY
 
167,802 
Caterpillar 950M, Wheel Loaders, Construction
- Wheel Loaders
FINANZAUTO S.A.
 
166,716 
Caterpillar 950M, Wheel Loaders, Construction
- Wheel Loaders
FINANZAUTO S.A.
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.