AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

8J5697 CYLINDER GROUP (9K3164 N/S) (Change 0)--4" Bore x 18.60" Stroke Part of 5K1614 Top Clamp Arrangement listed on Page 228 AN ATTACHMENT 950


HYDRAULIC SYSTEM
CYLINDER GP
VALVE GP-CONTROL
OPERATOR STATION
CONTROL GP-HYDRAULIC

WHEEL LOADER 950 WHEEL LOADER 31K
 950 WHEEL LOADER 31K01486-UP (MACHINE) POWERED BY 3304 ENGINE SEBP1048 950 31K   (1968)

HYDRAULIC SYSTEM

CYLINDER GP
TILT CYLINDER GROUP
7J-9696 TILT CYLINDER GROUP
BUCKET CYLINDER GROUP
8J-5690 BUCKET CYLINDER GROUP
CYLINDER GROUP
8J-5697 CYLINDER GROUP
CYLINDER GROUP
8J-5720 CYLINDER GROUP
CYLINDER GROUP
8J-5721 CYLINDER GROUP
CYLINDER GROUP
8J-5683 CYLINDER GROUP
 

#SEBP10480700
 

8J-5697: CYLINDER GROUP

8J5697 CYLINDER GROUP (9K3164 N/S) (Change 0)--4" Bore x 18.60" Stroke
Part of 5K1614 Top Clamp Arrangement listed on Page 228
AN ATTACHMENT
c148151 SEBP1048
8J5697 CYLINDER GROUP Parts scheme
  For full view, you need register

Parts for your 950 WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  8J-2023 [1] PISTON  
  2J-3950 [1] NUT  
  5P-0093 H [2] SEAL  
  7J-9351 [1] BEARING  
  2K-0044 [1] ELBOW  
    (Parts of 8J5698 Assem.)
  1M-1571 [1] RING  
  5J-5402 [1] SEAL ASSEM.  
  8J-5698 [1] CYLINDER ASSEM.  
  8J-5701 [1] ROD ASSEM.  
  1H-8128 [1] RING  
  2K-6830 [1] WASHER  
  2K-6840 [1] HEAD  
  1K-7033 [2] SHIM (.032" THICK)  
  5J-0391 [3] SHIM (.010" THICK)  
  1K-5579 [1] GLAND  
  0S-1585 [2] BOLT  
  5P-0093 H [2] SEAL  
  7J-9351 [1] BEARING  
    (Part of 8J7501 Assem.)
  1K-6981 [1] SEAL  
  1K-7112 [1] PACKING  
  2A-1538 [4] BOLT  
  H   NOT PART OF 8J5697 CYLINDER GR
 

#SEBP10480701
 

8J-5720: CYLINDER GROUP

8J5720 CYLINDER GROUP (9K3168 N/S) (Change 0)--R.H.--4.50" Bore x 17.20" Stroke
Part of 8K6278 Top Clamp Arrangement listed on Page 228
AN ATTACHMENT
c201981 SEBP1048
8J5720 CYLINDER GROUP Parts scheme
  For full view, you need register

Parts for your 950 WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8489 [1] FITTING  
2. 2J-3950 [1] NUT  
3. 3B-4506 [4] LOCKWASHER  
4. 5J-4986 [1] SEAL ASSEM.  
5. 2H-3928 [1] SEAL  
6. 1K-7095 [1] RING  
7. 2J-3864 [1] SHIM (.0478 in. thick)  
8. 2J-3861 [6] SHIM (.010 in. thick)  
9. 1K-6981 [1] SEAL  
10. 8J-5724 [1] ROD ASSEM.  
11. 8J-5667 [1] BEARING  
12. 3B-1915 [4] BOLT  
13. 2J-3860 [1] RETAINER  
14. 1D-4608 [4] BOLT  
15. 3B-4512 [4] LOCKWASHER  
16. 3F-9609 [1] PACKING  
17. 5J-9989 [1] HEAD  
18. 5J-9986 [1] PISTON  
19. 4J-2620 [1] RING  
20. 8J-5722 [1] CYLINDER ASSEM.  
21. 8J-5717 [1] BEARING  
22. 5P-0094 H [4] SEAL  
  H   NOT PART OF 8J5720 CYLINDER GR
 

#SEBP10480702
 

8J-5721: CYLINDER GROUP

8J5721 CYLINDER GROUP (9K3169 N/S) (Change 0)--L.H.--4.50" Bore x 17.50" Stroke
Part of 8K6278 Top Clamp Arrangement listed on Page 228
c145554 SEBP1048
8J5721 CYLINDER GROUP Parts scheme
  For full view, you need register

Parts for your 950 WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8J-5722 [1] CYLINDER ASSEM.  
2. 8J-5717 [1] BEARING  
3. 3B-4506 [4] LOCKWASHER  
4. 5J-4986 [1] SEAL ASSEM.  
5. 2H-3928 [1] SEAL  
6. 1K-7095 [1] RING  
7. 2J-3864 [1] SHIM (.0478 in. thick)  
8. 2J-3861 [6] SHIM (.010 in. thick)  
9. 1K-6981 [1] SEAL  
10. 8J-5724 [1] ROD ASSEM.  
11. 8J-5667 [1] BEARING  
12. 3B-1915 [4] BOLT  
13. 2J-3860 [1] RETAINER  
14. 1D-4608 [4] BOLT  
15. 3B-4512 [4] LOCKWASHER  
16. 3F-9609 [1] PACKING  
17. 5J-9989 [1] HEAD  
18. 5J-9986 [1] PISTON  
19. 4J-2620 [1] RING  
20. 2J-3950 [1] NUT  
21. 3B-8489 [1] FITTING  
22. 5P-0094 H [4] SEAL  
  H   NOT PART OF 8J5721 CYLINDER GR
 

#SEBP10480703
 

8J-5683: CYLINDER GROUP

8J5683 CYLINDER GROUP (9K3161 N/S)--(Change 0)--4.5" Bore x 14" Stroke--R.H.
Part of 7K1422 and 1V9785 Multi-Purpose Bucket Arrangements listed on Page 216A
AN ATTACHMENT
c145366 SEBP1048
8J5683 CYLINDER GROUP Parts scheme
  For full view, you need register

Parts for your 950 WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  8J-5685 [1] CYLINDER ASSEM.  
  4J-3747 [1] PISTON  
  4J-3745 [1] RING  
  5P-0092 H [2] SEAL  
  2K-0044 [1] ELBOW  
    (PART OF 8J5685 ASSEM.)
  7J-9688 [1] BEARING  
    (PART OF 8J5685 ASSEM.)
  2J-3950 [1] NUT  
  5J-4986 [1] SEAL ASSEM  
  8J-5688 [1] ROD ASSEM.  
  2H-3928 [1] SEAL  
  1K-7095 [1] WASHER  
  1K-7112 [1] PACKING  
  4J-3746 [6] SHIM  
  1K-5579 [1] GLAND  
  5P-0092 H [2] SEAL  
  1K-6981 [1] SEAL  
  7J-9688 [1] BEARING  
    (PART OF 8J5688 ASSEM)
  1A-8063 [4] BOLT  
  3B-4512 [4] LOCKWASHER  
  3K-8629 [1] HEAD  
  0S-1585 [2] BOLT  
  3B-4508 [2] LOCKWASHER  
  H   NOT PART OF 8J5683 GROUP
 

#SEBP10480704
 

8J-5684: CYLINDER GROUP

8J5684 CYLINDER GROUP (9K3162 N/S)--(Change 0)--4.5" Bore X 14" Stroke--L.H.
Part of 7K1422 and 1V9785 Multi-Purpose Bucket Arrangements listed on Page 216A
AN ATTACHMENT
c148150 SEBP1048
8J5684 CYLINDER GROUP Parts scheme
  For full view, you need register

Parts for your 950 WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  8J-5691 [1] CYLINDER ASSEM.  
  2J-3950 [1] NUT  
  2K-0044 [1] ELBOW  
    (Part of 8J5691 Assem.)
  5P-0094 H [2] SEAL  
  7J-9699 [1] BEARING  
    (Part of 8J5691 Assem.)
  4J-4630 [1] RING  
  5J-1922 [1] PISTON  
  5J-5020 [1] SEAL ASSEM.  
  8J-5694 [1] ROD ASSEM.  
  2K-3739 [1] HEAD  
  5F-3144 [1] SEAL  
  2K-4096 [1] WASHER  
  1K-7112 [1] PACKING  
  1K-6981 [1] SEAL  
  5P-0065 H [2] SEAL  
  8J-5696 [1] BEARING  
    (Part of 8J5694 Assem.)
  0S-1585 [2] BOLT  
  3B-4508 [2] LOCKWASHER  
  1K-5579 [1] GLAND  
  1K-7033 [2] SHIM (.032" THICK)  
  5J-0391 [3] SHIM (.010" THICK)  
  1A-8063 [4] BOLT  
  3B-4512 [4] LOCKWASHER  
  H   NOT PART OF 8J5690 CYLINDER GR
 

#SEBP10480705
 

5K-2681: HYDRAULIC VALVE CONTROL GROUP

5K2681 HYDRAULIC VALVE CONTROL GROUP
Part of 8K5553 Hydraulic Arrangement listed on Page 170
AN ATTACHMENT
c132768 SEBP1048
5K2681 HYDRAULIC VALVE CONTROL GROUP Parts scheme
  For full view, you need register

Parts for your 950 WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  0L-1170 [1] HANDLE  
  4K-8454 [1] LEVER  
  9S-5610 [1] PLATE  
    (Used with Multipurpose Bucket or Top Clamp Arrangement)
  9S-5616 [1] PLATE  
    (Used with Side Dump Bucket)
  9S-5722 [1] PLATE  
    (Used with Rear Mounted Ripper Arrangement)
  4B-4158 [4] SCREW  
  5K-2679 [1] COVER  
  4K-9033 [1] SHAFT  
  4H-3119 [1] PIN  
  1B-4205 [2] NUT  
  3B-4508 [2] LOCKWASHER  
  5K-2968 [2] JOINT  
  3B-4631 [2] COTTER PIN  
  2K-5697 [2] COLLAR  
  1B-4430 [2] NUT  
  4F-2348 [1] ROD  
  6K-0647 [2] BEARING  
  5K-3028 [1] BELLCRANK ASSEM.  
  5H-6822 [1] BUSHING  
    (Part of Bellcrank Assem. 5K3028)
  4H-1394 [2] WASHER  
  5K-3030 [1] BRACKET ASSEM.  
  3B-1915 [2] BOLT  
  3B-4506 [2] LOCKWASHER  
  1B-4430 [2] NUT  
  5K-3029 [1] ROD  
  6K-4442 [2] BALLJOINT ASSEM.  
  1B-4205 [2] NUT  
  3B-4508 [2] LOCKWASHER  
 

#SEBP10480706
 

5K-2990: CONTROL GP-HYDRAULIC

5K2990 HYDRAULIC CONTROL GROUP--Third Valve--Single Tilt--Type 1
Part of 8K5554 Hydraulic Arrangement listed on Page 170
AN ATTACHMENT
c207707 SEBP1048
5K2990 CONTROL GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 950 WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  0L-0829 [1] HANDLE  
  5K-0822 [1] LEVER ASSEM. (LIFT)  
  4F-2926 [2] BEARING  
    (PART OF LEVER ASSEM.5K822)
  4J-5525 [1] SHAFT ASSEM.  
  8F-5340 [2] SEAL  
  0S-0107 [1] WASHER  
  1L-8497 [1] RING  
  3B-8485 [1] FITTING  
  0L-1351 [3] BOLT  
  3B-4506 [3] LOCKWASHER  
  4B-4278 [3] WASHER  
  9K-7783 [1] COVER ASSEM.  
  1A-2029 [3] BOLT  
  1D-4717 [3] NUT  
  3B-4506 [3] LOCKWASHER  
  5K-2971 [1] BRACKET ASSEM.  
  0L-1351 [4] BOLT  
  3B-4506 [4] LOCKWASHER  
  9K-9825 C [1] PLATE ASSEM.  
  9K-3625 [1] PLATE ASSEM.  
    (Part of 9K9825 Assem.)
  9F-2978 [6] NUT  
    (Part of 9K3625 Assem.)
  0L-1351 [7] BOLT  
  3B-4506 [7] LOCKWASHER  
  4B-4278 [7] WASHER  
  5K-2973 [1] ROD  
  1B-4430 [2] NUT  
  6K-4442 [2] BALLJOINT ASSEM.  
  1B-4430 [2] NUT  
  6K-4442 [2] BALLJOINT ASSEM.  
  1B-4205 [2] NUT  
  3B-4508 [2] LOCKWASHER  
  1B-4205 C [1] NUT  
  3B-4508 [2] LOCKWASHER  
  4K-1357 [2] SOCKET  
  0S-1617 [1] BOLT  
  3B-4505 [1] LOCKWASHER  
  4K-1375 [1] STUD ASSEM.  
  3B-8486 [1] FITTING  
  4K-2075 [1] RING  
  2A-1736 [1] HANDLE  
  5K-2976 [1] LEVER ASSEM.  
    (TILT AND THIRD VALVE)
  5K-2979 [1] COVER  
  5K-2053 [1] BRACKET ASSEM.  
  9F-2978 [2] NUT (WELD)  
    (PART OF BRACKET ASSEM. 5K2053)
  8S-6819 [1] PLATE (NOT SHOWN)  
    (FOR USE WITH TOP CLAMP ARR.)
  8S-6818 [1] PLATE (NOT SHOWN)  
    (FOR USE WITH SIDE DUMP BUCKET)
  4B-4158 [4] SCREW (NOT SHOWN)  
    (MOUNTED ON PLATFORM SUPPORT)
  1B-4206 [1] NUT  
  3B-4510 [1] LOCKWASHER  
  4B-5275 [1] WASHER  
  5K-2991 [1] ROD (LIFT)  
  5K-2974 [1] ROD  
  1B-4430 [2] NUT  
  6K-4442 [2] BALLJOINT ASSEM.  
  1B-4205 C [1] NUT  
  3B-4508 [2] LOCKWASHER  
  C   INDICATES CHANGE
 

#SEBP10480707
 

5K-2990: CONTROL GP-HYDRAULIC

5K2990 HYDRAULIC CONTROL GROUP--Third Valve--Single Tilt--Type 2
Part of 8K5554 Hydraulic Arrangement listed on Page 170
AN ATTACHMENT
c164156 SEBP1048
5K2990 CONTROL GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 950 WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  0L-0829 [1] HANDLE  
  5K-0673 C [1] LEVER ASSEM. (LIFT)  
  8F-0513 [2] BUSHING  
    (Part of Lever Assem. 5K673)
  7K-7535 C [1] SHAFT ASSEM.  
  6K-8088 C [2] BEARING  
  0S-0107 [1] WASHER  
  1L-8497 [1] RING  
  0L-1351 [3] BOLT  
  3B-4506 [3] LOCKWASHER  
  4B-4278 [3] WASHER  
  9K-7783 [1] COVER ASSEM.  
  1A-2029 [3] BOLT  
  1D-4717 [3] NUT  
  3B-4506 [3] LOCKWASHER  
  5K-2971 [1] BRACKET ASSEM.  
  0L-1351 [4] BOLT  
  3B-4506 [4] LOCKWASHER  
  9K-9825 [1] PLATE ASSEM.  
  9K-3625 [1] PLATE ASSEM.  
    (Part of 9K9825 Assem.)
  9F-2978 [6] NUT  
    (Part of 9K3625 Assem.)
  0L-1351 [7] BOLT  
  3B-4506 [7] LOCKWASHER  
  4B-4278 [7] WASHER  
  5K-2973 [1] ROD  
  1B-4430 [2] NUT  
  6K-4442 [2] BALLJOINT ASSEM.  
  1B-4430 [2] NUT  
  6K-4442 [2] BALLJOINT ASSEM.  
  1B-4205 [2] NUT  
  3B-4508 [2] LOCKWASHER  
  1B-4205 [1] NUT  
  3B-4508 [2] LOCKWASHER  
  9S-2149 C [2] SOCKET  
  0S-1617 [1] BOLT  
  3B-4505 [1] LOCKWASHER  
  4K-1375 [1] STUD ASSEM.  
  9F-2247 C [1] PLUG  
  4K-2075 [1] RING  
  5K-2046 C [1] STRIP  
  2A-1736 [1] HANDLE  
  5K-2976 [1] LEVER ASSEM.  
    (TILT AND THIRD VALVE)
  5K-2979 [1] COVER  
  5K-2053 [1] BRACKET ASSEM.  
  9F-2978 [2] NUT (WELD)  
    (PART OF BRACKET ASSEM. 5K2053)
  8S-6819 C [1] FILM (NOT SHOWN)  
    (FOR USE WITH TOP CLAMP ARR.)
  8S-6818 C [1] FILM (NOT SHOWN)  
    (FOR USE WITH SIDE DUMP BUCKET)
  1B-4206 [1] NUT  
  3B-4510 [1] LOCKWASHER  
  4B-5275 [1] WASHER  
  5K-2991 [1] ROD (LIFT)  
  5K-2974 [1] ROD  
  1B-4430 [2] NUT  
  6K-4442 [2] BALLJOINT ASSEM.  
  1B-4205 [1] NUT  
  3B-4508 [2] LOCKWASHER  
  C   INDICATES CHANGE
 

#SEBP10480708
 

5K-2062: HAND CONTROL GROUP

5K2062 HAND CONTROL GROUP
Serial No. 81J7846 to 81J8692, 81J8695, 81J8697 to 81J8714 and 81J8716 to 81J8733 inclusive
and 31K1486 to 31K1649 inclusive
c156398 SEBP1048
5K2062 HAND CONTROL GROUP Parts scheme
  For full view, you need register

Parts for your 950 WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  1K-0485 [3] WASHER  
    (use as required)
  6D-5974 [2] BEARING  
  6D-5974 [2] BEARING  
  4K-8416 [1] SHAFT  
  0L-1351 [4] BOLT  
  3B-4506 [4] LOCKWASHER  
  4B-4278 [4] WASHER  
  5K-1654 [1] COVER  
  4H-3119 [1] PIN  
  9K-9825 C [1] PLATE ASSEM.  
  9F-2978 [6] NUT (weld)  
    (Part of 9K9825 Assem.)
  1D-4717 C [1] NUT  
  3B-4506 [1] LOCKWASHER  
  4B-4278 [1] WASHER  
  5K-2047 [1] ROD (lower and raise)  
  1B-4430 [2] NUT  
  6K-4442 [2] BALLJOINT ASSEM.  
  1B-4430 [2] NUT  
  3B-4508 [2] LOCKWASHER  
  0L-1170 [1] HANDLE  
  0L-1170 [1] HANDLE  
  4K-8477 [1] LEVER  
    (DUMP AND TILT BACK)
  4K-8454 [1] LEVER  
    (LOWER AND RAISE)
  5K-2046 [1] STRIP  
  9K-7783 [1] COVER ASSEM.  
  5K-2053 [1] BRACKET ASSEM.  
  9F-2978 [2] NUT (WELD)  
    (PART OF BRACKET ASSEM. 5K2053)
  4K-8397 [1] BRACKET  
  1A-2029 [4] BOLT  
  3B-4506 [4] LOCKWASHER  
  0L-1351 [2] BOLT  
  3B-4506 [2] LOCKWASHER  
  4B-4278 [2] WASHER  
  0L-1351 C [4] BOLT  
  3B-4506 C [4] LOCKWASHER  
  4B-4278 C [4] WASHER  
  5K-2048 [1] ROD (DUMP AND TILT BACK)  
  1B-4430 [2] NUT  
  6K-4442 [2] BALLJOINT ASSEM  
  1B-4430 [2] NUT  
  3B-4508 [2] LOCKWASHER  
  C   INDICATES CHANGE
 

#SEBP10480709
 

5K-2062: HAND CONTROL GROUP

5K2062 HAND CONTROL GROUP
Serial No. 81J8693, 81J8694, 81J8696, 81J8715 and 81J8734-Up and 31K1650-Up
c159251 SEBP1048
5K2062 HAND CONTROL GROUP Parts scheme
  For full view, you need register

Parts for your 950 WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  1K-0485 [3] WASHER  
    (use as required)
  6D-5974 [2] BEARING  
  6D-5974 [2] BEARING  
  4K-8416 [1] SHAFT  
  0L-1351 [4] BOLT  
  5P-1075 C [4] WASHER  
  5K-1654 [1] COVER  
  4H-3119 [1] PIN  
  9K-9825 [1] PLATE ASSEM.  
  9F-2978 [6] NUT (weld)  
    (Part of 9K9825 Assem.)
  0S-1594 C [1] BOLT  
  5P-1075 C [1] WASHER  
  5K-2047 [1] ROD (lower and raise)  
  1B-4430 [2] NUT  
  6K-4442 [2] BALLJOINT ASSEM.  
  1B-4430 [2] NUT  
  3B-4508 [2] LOCKWASHER  
  0L-1170 [1] HANDLE  
  0L-1170 [1] HANDLE  
  4K-8477 [1] LEVER  
    (DUMP AND TILT BACK)
  4K-8454 [1] LEVER  
    (LOWER AND RAISE)
  5K-2046 [1] STRIP  
  9K-7783 [1] COVER ASSEM.  
  5K-2053 [1] BRACKET ASSEM.  
  9F-2978 [2] NUT (WELD)  
    (PART OF BRACKET ASSEM. 5K2053)
  4K-8397 [1] BRACKET  
  1A-2029 [4] BOLT  
  5P-1075 C [4] WASHER  
  0L-1351 [2] BOLT  
  5P-1075 C [2] WASHER  
  0L-1351 [4] BOLT  
  5P-1075 C [4] WASHER  
  5K-2048 [1] ROD (DUMP AND TILT BACK)  
  1B-4430 [2] NUT  
  6K-4442 [2] BALLJOINT ASSEM.  
  1B-4430 [2] NUT  
  3B-4508 [2] LOCKWASHER  
  C   INDICATES CHANGE
 

Information:

Special Instruction
Installation Of Tilt Cylinder Link Assembly Oversize Bearings{6119}
Installation Of Tilt Cylinder Link Assembly Oversize Bearings{6119}
Installation Of Tilt Cylinder Link Assembly Oversize Bearings{6119}
Installation Of Tilt Cylinder Link Assembly Oversize Bearings{6119}
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Technical Information Bulletin
The Failure of the Buffer Seal that can be Caused by a Defect in the Seal Groove on All Track-Type Tractors, Wheel Loaders, Hydraulic Excavators and Backhoe Loaders that Use Cylinders that were Manufactured After 1January 2000{7562}
The Failure of the Buffer Seal that can be Caused by a Defect in the Seal Groove on All Track-Type Tractors, Wheel Loaders, Hydraulic Excavators and Backhoe Loaders that Use Cylinders that were Manufactured After 1January 2000{7562}
Surface Finishes of Cylinder Bores{7562}
Surface Finishes of Cylinder Bores{7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Specifications
Cylinders
950 WHEEL LOADER
Tool Operating Manual
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Reuse And Salvage Guidelines
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
Contamination Control Guidelines
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Applied Failure Analysis
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Bench Test Procedures
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Disassembly and Assembly
Bucket Positioner Master Cylinder
950 WHEEL LOADER VEHICLE SYSTEMS
Lift Cylinders
950 WHEEL LOADER VEHICLE SYSTEMS
Tilt Cylinders
950 WHEEL LOADER VEHICLE SYSTEMS
Lift And Tilt Cylinder Bearings
950 WHEEL LOADER VEHICLE SYSTEMS
Service Magazine
Use Earlier Rod Bearings For Lift Cylinders To Prevent Failures{5102}
1978/12/04
New Backup Rings Are Available for Sealing Hydraulic Cylinders with Pitted Grooves {4303, 5102, 5104, 5106, 5456, 7562}
2002/07/01
New Seals and Backup Rings for Hydraulic Cylinders are Available {4303, 5102, 5104, 7562}
2001/08/06
New Assembly Instructions for Rod Seals on Hydraulic Cylinders are Available {7562}
2001/07/30
Correctly Assembling the Buffer Seal Will Prevent Failure of the U-Cup Seals {7562}
2001/07/30
Double Lip Wiper Seals Must Be Installed Properly {7562}
2002/12/09
Procedure Now Available to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
2013/02/28
Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
2011/10/17
A Rework Procedure Improves the Seal Assembly Performance in Hydraulic Cylinders on Cat Products {7562}
2010/04/30

Caterpillar Parts SIS Catalog 950 :

BUCKET CYLINDER GROUP
8J-5690 BUCKET CYLINDER GROUP
TILT CYLINDER GROUP
7J-9696 TILT CYLINDER GROUP
TILT CYLINDER GROUP
7J-9695 TILT CYLINDER GROUP
CYLINDER GP-LIFT
7J-9690 CYLINDER GP-LIFT
CYLINDER GP-LIFT
7J-9690 CYLINDER GP-LIFT
LINES GP-CYLINDER
7K-8837 LINES GP-CYLINDER
LINES GP-CYLINDER
7K-8837 LINES GP-CYLINDER
LINES GP-CYLINDER
7K-8837 LINES GP-CYLINDER
CYLINDER GROUP
8J-5720 CYLINDER GROUP
CYLINDER GROUP
8J-5721 CYLINDER GROUP
CYLINDER GROUP
8J-5683 CYLINDER GROUP
CYLINDER GROUP
8J-5684 CYLINDER GROUP
HYDRAULIC VALVE CONTROL GROUP
5K-2681 HYDRAULIC VALVE CONTROL GROUP
CONTROL GP-HYDRAULIC
5K-2990 CONTROL GP-HYDRAULIC
CONTROL GP-HYDRAULIC
5K-2990 CONTROL GP-HYDRAULIC
HAND CONTROL GROUP
5K-2062 HAND CONTROL GROUP

Truck sale:

 
 
Caterpillar 950M, Wheel Loaders, Construction
- Wheel Loaders
WESTERN STATES EQUIPMENT
Caterpillar 950M, Wheel Loaders, Construction
385,000 
Caterpillar 950M, Wheel Loaders, Construction
- Wheel Loaders
WYOMING MACHINERY
Caterpillar 950M, Wheel Loaders, Construction
454,718 
Caterpillar 950M, Wheel Loaders, Construction
- Wheel Loaders
WYOMING MACHINERY
 
167,802 
Caterpillar 950M, Wheel Loaders, Construction
- Wheel Loaders
FINANZAUTO S.A.
 
166,716 
Caterpillar 950M, Wheel Loaders, Construction
- Wheel Loaders
FINANZAUTO S.A.
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.