AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

1U630 TOOTH GROUP--Short Tip FOR USE WITH 5V7272 BUCKET ARRANGEMENT, 5V7268, 5V7266 AND 5V7264 BUCKET GROUPS SHOWN ON PAGES 216, 216C-2, 219A AND 219B. 9J3175 Tip parts are shown on Page 225A. AN ATTACHMENT 950


WORK TOOLS
GROUND ENGAGING TOOLS (G.E.T.)

WHEEL LOADER 950 WHEEL LOADER 31K
 950 WHEEL LOADER 31K01486-UP (MACHINE) POWERED BY 3304 ENGINE SEBP1048 950 31K   (1968)

WORK TOOLS

GROUND ENGAGING TOOLS (G.E.T.)
TIP GP-SHORT
9J-3175 TIP GP-SHORT
TOOTH GP-LONG
1U-0629 TOOTH GP-LONG
TOOTH GP-SHORT
1U-0630 TOOTH GP-SHORT
CUTTING EDGE GROUP
8J-9084 CUTTING EDGE GROUP
CUTTING EDGE GROUP
8J-9085 CUTTING EDGE GROUP
CUTTING EDGE
8J-8141 CUTTING EDGE
 

#SEBP10480760
 

1U-0630: TOOTH GP-SHORT

1U630 TOOTH GROUP--Short Tip
FOR USE WITH 5V7272 BUCKET ARRANGEMENT, 5V7268, 5V7266 AND 5V7264
BUCKET GROUPS SHOWN ON PAGES 216, 216C-2, 219A AND 219B. 9J3175 Tip
parts are shown on Page 225A. AN ATTACHMENT
c179156 SEBP1048
1U0630 TOOTH GP-SHORT Parts scheme
  For full view, you need register

Parts for your 950 WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5P-8823 [2] BOLT  
2. 5P-8362 [2] NUT  
3. 3G-4309 [1] ADAPTER (R.H.)  
  3G-4308 [1] ADAPTER (L.H.)  
4. 9J-3175 YC [8] TIP GROUP  
    (Separate Illustration)
5. 1U-0307 [6] ADAPTER  
6. 8J-2928 [12] BOLT  
7. 8J-2933 [12] NUT  
  C   INDICATES CHANGE
  Y   SEPARATE ILLUSTRATION
 

#SEBP10480761
 

8J-9084: CUTTING EDGE GROUP

8J9084 CUTTING EDGE GROUP--Replaced by 1U1463 shown on Page 226C
PROVIDES BOLT-ON CUTTING EDGE, FOR USE WITH 9K8306 BUCKET ASSEMBLY,
8J4254 WELD-ON ADAPTERS AND 8K8161 CUTTING EDGE
AN ATTACHMENT
c147051 SEBP1048
8J9084 CUTTING EDGE GROUP Parts scheme
  For full view, you need register

Parts for your 950 WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1J-5607 [9] BOLT  
2. 2J-3507 [9] NUT  
3. 8J-9078 [1] CUTTING EDGE (center)  
4. 8J-9077 [2] CUTTING EDGE (end)  
 

#SEBP10480762
 

8J-9085: CUTTING EDGE GROUP

8J9085 CUTTING EDGE GROUP--Replaced by 1U1468 shown on Page 226C
PROVIDES BOLT-ON CUTTING EDGE. FOR USE WITH 9K8297 BUCKET ASSEMBLY
AND 8K8162 CUTTING EDGE. AN ATTACHMENT
c147049 SEBP1048
8J9085 CUTTING EDGE GROUP Parts scheme
  For full view, you need register

Parts for your 950 WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1J-5607 [10] BOLT  
2. 2J-3507 [10] NUT  
3. 8J-9076 [1] CUTTING EDGE (center)  
4. 8J-9075 [2] CUTTING EDGE (end)  
 

#SEBP10480763
 

8J-8141: CUTTING EDGE

8J8141 CUTTING EDGE--Half Arrow--Field Installation
Provides bulk length Half Arrow Cutting Edge stock for Bucket rebuilding refer to Buckets
for quantity used
SEBP10480763 SEBP1048
8J8141 CUTTING EDGE Parts scheme
  For full view, you need register

Parts for your 950 WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
 

#SEBP10480764
 

1U-1932: BIT AND CUTTING EDGE GROUP

1U1932 BIT AND CUTTING EDGE GROUP
FOR USE WITH 5V7264 BUCKET GROUP SHOWN ON PAGE 219B. AN ATTACHMENT
c178474 SEBP1048
1U1932 BIT AND CUTTING EDGE GROUP Parts scheme
  For full view, you need register

Parts for your 950 WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4F-4042 [12] BOLT  
  2J-3507 [12] NUT  
2. 1U-2414 [2] EDGE  
3. 3G-9512 [2] BIT  
 

#SEBP10480765
 

1U-1930: BIT AND CUTTING EDGE GROUP

1U1930 BIT AND CUTTING EDGE GROUP
FOR USE WITH 5V7268 AND 5V7266 BUCKET GROUPS SHOWN ON PAGES
216C-2 AND 219A. AN ATTACHMENT
c178472 SEBP1048
1U1930 BIT AND CUTTING EDGE GROUP Parts scheme
  For full view, you need register

Parts for your 950 WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4F-4042 [12] BOLT  
  2J-3507 [12] NUT  
2. 1U-2412 [2] EDGE  
3. 3G-9512 [2] BIT  
 

#SEBP10480766
 

1U-1931: BIT AND CUTTING EDGE GROUP

1U1931 BIT AND CUTTING EDGE GROUP
FOR USE WITH 5V7272 BUCKET ARRANGEMENT ON PAGE 216. AN ATTACHMENT
c178473 SEBP1048
1U1931 BIT AND CUTTING EDGE GROUP Parts scheme
  For full view, you need register

Parts for your 950 WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4F-4042 [12] BOLT  
  2J-3507 [12] NUT  
2. 1U-2413 [2] EDGE  
3. 3G-9512 [2] BIT  
 

#SEBP10480767
 

1U-1463: CUTTING EDGE GROUP

1U1463 CUTTING EDGE GROUP
PROVIDES BOLT-ON CUTTING EDGE. FOR USE WITH GENERAL PURPOSE BUCKET
ASSEMBLIES AND 8K8161 CUTTING EDGE. AN ATTACHMENT
c177793 SEBP1048
1U1463 CUTTING EDGE GROUP Parts scheme
  For full view, you need register

Parts for your 950 WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1J-5607 [9] BOLT  
2. 2J-3507 [9] NUT  
3. 1U-1465 [1] CUTTING EDGE (center)  
4. 1U-1464 [2] CUTTING EDGE (end)  
 

#SEBP10480768
 

1U-1468: CUTTING EDGE GROUP

1U1468 CUTTING EDGE GROUP
PROVIDES BOLT-ON CUTTING EDGE. FOR USE WITH 9K8288 GENERAL PURPOSE
BUCKET, 9K8297 AND 9K8306 BUCKET ASSEMBLY. AN ATTACHMENT
c232381 SEBP1048
1U1468 CUTTING EDGE GROUP Parts scheme
  For full view, you need register

Parts for your 950 WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1J-5607 [10] BOLT  
2. 2J-3507 [10] NUT  
3. 1U-1470 [1] CUTTING EDGE (center)  
4. 1U-1469 [2] CUTTING EDGE (end)  
 

#SEBP10480769
 

8J-7748: CUTTING EDGE GROUP

8J7748 CUTTING EDGE GROUP--Field Installation--Replaced by 1U1463 shown on
Page 226C
PROVIDES BOLT-ON CUTTING EDGE. FOR USE WITH 9K8306 BUCKET ASSEMBLY
SHOWN ON PAGE 219
SEBP10480769 SEBP1048
  For full view, you need register

Parts for your 950 WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  4F-4042 [9] BOLT 3.00" LONG  
  3K-5234 [9] WASHER  
    - OR -
  1J-5607 [9] BOLT 2.75" LONG  
  2J-3507 [9] NUT  
  8J-7746 [1] EDGE (CENTER SECTION)  
  8J-7747 [2] EDGE (END SECTION)  
 

Information:

Special Instruction
Installation Of Flush Mounted (*FM), Bottom Strap (**BS) And Flush Mounted Corner Tooth Adapters{6803}
Installation Of Flush Mounted (*FM), Bottom Strap (**BS) And Flush Mounted Corner Tooth Adapters{6803}
Installation Of Improved Cutting Edge Replacement Parts{6100, 6800}
Installation Of Improved Cutting Edge Replacement Parts{6100, 6800}
Procedure To Install Wear Protection On Base Edges And Adapters{6800}
Procedure To Install Wear Protection On Base Edges And Adapters{6800}
Recommendations for Welding J-Series 2-Strap Bucket Adapters to Base Edges{6800, 6801, 6803}
Recommendations for Welding J-Series 2-Strap Bucket Adapters to Base Edges{6800, 6801, 6803}
Installation and Removal Of The Mechanically Attached Wear Plate System
Installation and Removal Of The Mechanically Attached Wear Plate System
Instructions for Welding the "K Series" Adapters{6803}
Instructions for Welding the "K Series" Adapters{6803}
Instructions for Weld Finish of the "K" Series Adapters Installed on Large Wheel Loader Buckets{0679, 6101, 6102, 6104, 6805}
Instructions for Weld Finish of the "K" Series Adapters Installed on Large Wheel Loader Buckets{0679, 6101, 6102, 6104, 6805}
398-6784 Recommended J Series Two Strap Adapter Welding Sequence {0679, 6800, 6801, 6802, 6803, 6805}
398-6784 Recommended J Series Two Strap Adapter Welding Sequence {0679, 6800, 6801, 6802, 6803, 6805}
398-6786 Recommended J Series Flush Mount/Abrasion Adapter Welding Sequence {0679, 6800, 6801, 6802, 6803, 6805}
398-6786 Recommended J Series Flush Mount/Abrasion Adapter Welding Sequence {0679, 6800, 6801, 6802, 6803, 6805}
256-2928 Recommended K Series Two Strap Adapter Welding Sequence {0679, 6800, 6801, 6802, 6803, 6805}
256-2928 Recommended K Series Two Strap Adapter Welding Sequence {0679, 6800, 6801, 6802, 6803, 6805}
256-2930 Recommended K Series Flush Mount/Abrasion Adapter Welding Sequence{0679, 6800, 6801, 6802, 6803, 6805}
256-2930 Recommended K Series Flush Mount/Abrasion Adapter Welding Sequence{0679, 6800, 6801, 6802, 6803, 6805}
Loader and Excavator Bucket Base Edge Assembly Welding Requirements {0679, 6001, 6101, 6102, 6103, 6104, 6110, 6112, 6120, 6122, 6138, 6503, 6523, 6530, 6800, 6801, 6823}
Loader and Excavator Bucket Base Edge Assembly Welding Requirements {0679, 6001, 6101, 6102, 6103, 6104, 6110, 6112, 6120, 6122, 6138, 6503, 6523, 6530, 6800, 6801, 6823}
Installation of Mechanically Attached Sidebar Protectors on Loader Bucket{6101, 6102, 6817}
Installation of Mechanically Attached Sidebar Protectors on Loader Bucket{6101, 6102, 6817}
Repairing Small Cracks In Base Edge Assemblies{0679, 6001, 6120, 6801}
Repairing Small Cracks In Base Edge Assemblies{0679, 6001, 6120, 6801}
Procedure for Installation and Removal of Cat<SUP>&reg;</SUP> Advansys Tips {0751, 6001, 6800, 6805}
Procedure for Installation and Removal of Cat® Advansys Tips {0751, 6001, 6800, 6805}
Instructions for Welding the Cat<SUP>&reg;</SUP> Advansys&trade; Adapters on Excavator and Wheel Loader Buckets {0679, 6001, 6800}
Instructions for Welding the Cat® Advansys™ Adapters on Excavator and Wheel Loader Buckets {0679, 6001, 6800}
Tool Operating Manual
Using the 149-0173 Choker-Style Fabric Basket to Install and Remove Bucket Teeth{0374, 0599, 0751, 6700, 6800}
Using the 149-0173 Choker-Style Fabric Basket to Install and Remove Bucket Teeth{0374, 0599, 0751, 6700, 6800}
Using 149-0174 Non-Choker Style Fabric Baskets to Install or Remove Bucket or Blade Cutting Edges{0374, 0599, 0632, 0700, 0751, 6800}
Using 149-0174 Non-Choker Style Fabric Baskets to Install or Remove Bucket or Blade Cutting Edges{0374, 0599, 0632, 0700, 0751, 6800}
Reuse And Salvage Guidelines
Application of Abrasion Resistant Material{0374, 0679, 0751, 0759, 6800}
Application of Abrasion Resistant Material{0374, 0679, 0751, 0759, 6800}
Service Magazine
6V4163 Bit And 6V4164 Driver Now Available For Removal Of Bolts For Flyweight Carrier{0612,1264}
1981/02/23
New Bucket Cutting Edges Give Longer Service Life And Improved Penetration (Cutting Ability){6801}
1981/11/16
Bucket End Bits Are Thicker Than Bucket Center Edges{6804}
1983/05/30
Procedure To Install Weld-On Half Arrow Cutting Edges{6800,6801,6805}
1984/10/08
Changing Over to New Two-Bolt Corner Guard System{6800,6802,6803}
1993/11/09
The Special Instruction, REHS0597, "Recommendation for Welding 2-Strap Bucket Adapters to Base Edges" is Available {6800, 6801, 6803}
2001/04/23
Pin Remover Helps the Technician Change K Series Bucket Teeth {0751}
2004/02/16
Correct Installation and Removal of Retainers for K Series Bucket Tips {6800, 6803, 6805}
2005/08/01
Preferred Positions for Mechanically Attached Wear Plates (MAWPS) {6100, 6120, 6820}
2009/04/27
New K Series GET Tips are Now Available for Certain Excavators and Wheel Loaders Buckets {6800, 6805}
New K Series GET Tips are Now Available for Certain Excavators and Wheel Loaders Buckets {6800, 6805}

Caterpillar Parts SIS Catalog 950 :

TOOTH GP-LONG
1U-0629 TOOTH GP-LONG
TIP GP-SHORT
9J-3175 TIP GP-SHORT
ABRASION TIP
TOOTH GROUP
8J-6589 TOOTH GROUP
TOOTH GROUP
5K-1613 TOOTH GROUP
TOOTH GROUP
8J-6588 TOOTH GROUP
TIP GP-LONG
9J-3167 TIP GP-LONG
CONTROL GP-BUCKET
8K-5241 CONTROL GP-BUCKET
CUTTING EDGE GROUP
8J-9084 CUTTING EDGE GROUP
CUTTING EDGE GROUP
8J-9085 CUTTING EDGE GROUP
CUTTING EDGE
8J-8141 CUTTING EDGE
BIT AND CUTTING EDGE GROUP
1U-1932 BIT AND CUTTING EDGE GROUP
BIT AND CUTTING EDGE GROUP
1U-1930 BIT AND CUTTING EDGE GROUP
BIT AND CUTTING EDGE GROUP
1U-1931 BIT AND CUTTING EDGE GROUP
CUTTING EDGE GROUP
1U-1463 CUTTING EDGE GROUP
CUTTING EDGE GROUP
1U-1468 CUTTING EDGE GROUP

Truck sale:

 
 
Caterpillar 950M, Wheel Loaders, Construction
- Wheel Loaders
WESTERN STATES EQUIPMENT
Caterpillar 950M, Wheel Loaders, Construction
385,000 
Caterpillar 950M, Wheel Loaders, Construction
- Wheel Loaders
WYOMING MACHINERY
Caterpillar 950M, Wheel Loaders, Construction
454,718 
Caterpillar 950M, Wheel Loaders, Construction
- Wheel Loaders
WYOMING MACHINERY
 
167,802 
Caterpillar 950M, Wheel Loaders, Construction
- Wheel Loaders
FINANZAUTO S.A.
 
166,716 
Caterpillar 950M, Wheel Loaders, Construction
- Wheel Loaders
FINANZAUTO S.A.
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.