AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

8J7751 CUTTING EDGE GROUP--Replaced by 1U1468 shown on Page 226C PROVIDES BOLT-ON EDGE. FOR USE WITH 9K8288, 9K8297 AND 9K8306 BUCKET ASSEMBLIES SHOWN ON PAGES 217, 218 AND 219. AN ATTACHMENT 950


WORK TOOLS
GROUND ENGAGING TOOLS (G.E.T.)
IMPLEMENTS
LOGGING AR
OPERATOR STATION
PANEL GP

WHEEL LOADER 950 WHEEL LOADER 31K
 950 WHEEL LOADER 31K01486-UP (MACHINE) POWERED BY 3304 ENGINE SEBP1048 950 31K   (1968)

WORK TOOLS

GROUND ENGAGING TOOLS (G.E.T.)
CUTTING EDGE GROUP
1U-1468 CUTTING EDGE GROUP
8J-7748 CUTTING EDGE GROUP
8J-7751 CUTTING EDGE GROUP
 

#SEBP10480770
 

8J-7751: CUTTING EDGE GROUP

8J7751 CUTTING EDGE GROUP--Replaced by 1U1468 shown on Page 226C
PROVIDES BOLT-ON EDGE. FOR USE WITH 9K8288, 9K8297 AND 9K8306
BUCKET ASSEMBLIES SHOWN ON PAGES 217, 218 AND 219. AN ATTACHMENT
SEBP10480770 SEBP1048
  For full view, you need register

Parts for your 950 WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  4F-4042 [10] BOLT 3.00" LONG  
  3K-5234 [10] WASHER  
    - OR -
  1J-5607 [10] BOLT 2.75" LONG  
  2J-3507 [10] NUT  
  8J-7749 [1] EDGE (CENTER SECTION)  
  8J-7750 [2] EDGE (END SECTION)  
 

#SEBP10480771
 

5K-1614: TOP CLAMP ARRANGEMENT

5K1614 TOP CLAMP ARRANGEMENT
FOR USE WITH LUMBER FORK. AN ATTACHMENT
SEBP10480771 SEBP1048
  For full view, you need register

Parts for your 950 WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  8J-5697 Y [1] CYLINDER GROUP  
  5K-2001 Y [1] FRAME AND CLAMP GROUP  
  5K-2130 Y [1] FRONT HYDRAULIC LINES GROUP  
  Y   SEPARATE ILLUSTRATION
 

#SEBP10480772
 

8K-6278: TOP CLAMP ARRANGEMENT

8K6278 TOP CLAMP ARRANGEMENT
FOR USE WITH 8K5553 HYDRAULIC ARRANGEMENT AND 8K5876 LOG FORK
GROUP SHOWN ON PAGES 170 AND 201. AN ATTACHMENT
SEBP10480772 SEBP1048
  For full view, you need register

Parts for your 950 WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  6K-5102 Y [1] TOP CLAMP GROUP  
  8J-5720 Y [1] CYLINDER GROUP  
  8J-5721 Y [1] CYLINDER GROUP  
  8K-5875 Y [1] HYDRAULIC LINES GROUP  
  Y   SEPARATE ILLUSTRATION
 

#SEBP10480773
 

6K-5102: TOP CLAMP GROUP

6K5102 TOP CLAMP GROUP--Type 1
Part of 8K6278 Top Clamp Arrangement
c141173 SEBP1048
6K5102 TOP CLAMP GROUP Parts scheme
  For full view, you need register

Parts for your 950 WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2K-0080 [2] PIN  
2. 3B-8489 [6] FITTING  
3. 0S-1621 [8] BOLT  
  3B-4508 [8] LOCKWASHER  
4. 2K-0703 [2] WASHER BAR  
5. 9K-1927 [2] CLAMP SERVICE GROUP  
6. 2K-3656 [1] BAR  
7. 6K-5411 [1] POINT ASSEM.  
8. 7K-9204 [2] SEAL  
9. 6K-5633 [2] PIN  
10. 1D-4590 [2] BOLT  
  3K-2889 [2] NUT  
 

#SEBP10480774
 

6K-5102: TOP CLAMP GROUP

6K5102 TOP CLAMP GROUP--Type 2
Part of 8K6278 Top Clamp Arrangement
c206937 SEBP1048
6K5102 TOP CLAMP GROUP Parts scheme
  For full view, you need register

Parts for your 950 WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2K-0080 [2] PIN  
2. 3B-8489 [6] FITTING  
3. 0S-1621 [8] BOLT  
  3B-4508 [8] LOCKWASHER  
4. 2K-0703 [2] WASHER BAR  
5. 1V-6322 C [2] TOP CLAMP ASSEM.  
    (Each Includes)
6. 2K-3656 [1] BAR  
7. 6K-5411 [1] POINT ASSEM.  
8. 7K-9204 [2] SEAL  
9. 7K-9640 C [2] BEARING  
10. 6K-5633 [2] PIN  
  1D-4590 [2] BOLT  
11. 3K-2889 [2] NUT  
 

#SEBP10480775
 

5K-2001: FRAME AND CLAMP GROUP

5K2001 FRAME AND CLAMP GROUP
Part of 5K1614 Top Clamp Arrangement listed on Page 228
AN ATTACHMENT
c117009 SEBP1048
5K2001 FRAME AND CLAMP GROUP Parts scheme
  For full view, you need register

Parts for your 950 WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  2K-4197 [1] PIN  
  3B-8489 [1] FITTING  
  0S-1621 [2] BOLT  
  3B-4508 [2] LOCKWASHER  
  2K-0703 [1] WASHER BAR  
    (Instruction for Installing Lumber Fork and Clamp)
  3F-4105 [2] PLATE  
    (Part of 9K1932 Group)
  9K-1932 [1] CLAMP SERVICE GROUP  
  3K-6522 [1] PIN  
  4K-0286 [2] SPACER  
  3B-8489 [1] FITTING  
  0S-1621 [2] BOLT  
  3B-4508 [2] LOCKWASHER  
  2K-0703 [1] WASHER BAR  
  9K-1407 [2] BEARING  
  7K-9204 [4] SEAL  
    (Parts of 9K1932 Group)
  3B-8489 [2] FITTING  
  2K-5143 [2] PIN ASSEM.  
  9F-8689 C [2] BOLT  
  2K-4821 [2] NUT  
  5K-1996 [1] FRAME ASSEM.  
  7K-0363 [4] SHIM  
  7K-0362 [2] BAR  
  3B-2968 [4] BOLT (3.50" long)  
  1D-4614 [4] BOLT (5" long)  
  1B-4331 [8] NUT  
  3B-4512 [8] LOCKWASHER  
  4K-0100 [2] BAR  
  4K-0056 [4] BLOCK  
  C   INDICATES CHANGE
 

#SEBP10480776
 

8K-5876: LOG FORK GROUP

8K5876 LOG FORK GROUP
5K1617 Counterweight, shown on Page 166, is recommended where rough ground conditions exist
c154563 SEBP1048
8K5876 LOG FORK GROUP Parts scheme
  For full view, you need register

Parts for your 950 WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6K-5302 [2] CHANNEL ASSEM.  
2. 6K-5488 [2] PIN  
  2B-7557 [2] CORK  
3. 8K-5874 [1] CARRIAGE ASSEM.  
  6K-5362 [1] CHANNEL ASSEM.  
4. 4K-4497 [7] BAR  
5. 8K-5872 [1] HINGE ASSEM. (L.H. Outer)  
  2K-4119 [1] BOSS (large)  
  2K-3592 [1] BOSS (small)  
6. 8K-5870 [1] HINGE ASSEM. (L.H. Inner)  
  2K-4119 [2] BOSS (large)  
  2K-3592 [2] BOSS (small)  
7. 8K-5869 [1] HINGE ASSEM. (R.H. Inner)  
  2K-4119 [2] BOSS (large)  
  2K-3592 [2] BOSS (small)  
8. 8K-5871 [1] HINGE ASSEM. (R.H. outer)  
  2K-4119 [1] BOSS (large)  
  2K-3592 [1] BOSS (small)  
9. 2K-3656 [1] BAR  
10. 7K-3509 C [2] TINE  
11. 7K-8708 C [2] TIP  
12. 0S-1621 [4] BOLT  
  3B-4508 [4] LOCKWASHER  
13. 5K-2266 [2] BAR  
  C   INDICATES CHANGE
 

#SEBP10480777
 

7K-2642: GAUGES AND DASH GROUP

7K2642 GAUGES AND DASH GROUP--Top View--Part 1 of 2
Serial No. 81J7846 to 81J8970 inclusive and 31K1486 to 31K1649 inclusive
c207688 SEBP1048
7K2642 GAUGES AND DASH GROUP Parts scheme
  For full view, you need register

Parts for your 950 WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5P-0580 H TUBE 26.67 dm(105 in.)  
    (Fuel Pressure)
2. 5P-0580 CH TUBE 20.32 dm(80 in.)  
    (Engine Oil Pressure)
3. 3S-2093 [8] TIE  
4. 0S-0509 [2] BOLT  
5. 3B-4506 [4] LOCKWASHER  
6. 4K-8519 [1] BRACKET  
7. 3K-6677 [2] FITTING  
  4K-9821 [2] SLEEVE  
  4K-9822 [2] NUT  
  4K-9823 [1] NUT  
8. 5P-0580 H TUBE 33.02 dm(130 in.)  
    (Fuel Pressure & Engine Oil Pressure)
9. 0S-1621 [7] BOLT  
  3B-4508 [7] LOCKWASHER  
  4B-4280 [7] WASHER  
10. 4N-2234 C [1] GAUGE (Fuel Pressure)  
11. 5P-2949 C [3] CONNECTOR  
    (Each Includes)
  4K-9822 [1] NUT  
  4K-9821 [1] SLEEVE  
12. 5M-1065 [1] GAUGE (Engine Oil Pressure)  
13. 7M-7865 [1] INDICATOR (Water Temp.)  
14. 4K-8516 [1] INDICATOR (Converter Oil Temp.)  
15. 3K-0443 [1] GAUGE (Air Pressure)  
16. 5K-3612 C [1] DASH ASSEM.  
  4H-3001 [1] BUTTON  
17. 1D-4717 [2] NUT  
18. 1H-5165 [3] CLIP  
19. 1H-5166 [2] CLIP  
20. 5P-0580 CH TUBE 38.10 dm(150 in.)  
21. 004-4914 C [1] TEE  
22. 4D-4785 C [1] SWITCH ASSEM. (pressure)  
23. 4H-5451 C [1] ELBOW  
  C   INDICATES CHANGE
  H   ORDER BY THE DECIMETRE
 

#SEBP10480778
 

7K-2642: GAUGES AND DASH GROUP

7K2642 GAUGES AND DASH GROUP--As Viewed from R.H. Side of Machine--Part 2 of 2
Serial No. 81J7846 to 81J8970 inclusive and 31K1486 to 31K1649 inclusive
c207689 SEBP1048
7K2642 GAUGES AND DASH GROUP Parts scheme
  For full view, you need register

Parts for your 950 WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  3K-6675 [1] FITTING  
  4K-9822 [1] NUT  
  4K-9821 [1] SLEEVE  
    (Parts of Fitting 3K6675)
  3B-6768 [1] BUSHING  
  5P-2948 C [1] FITTING  
  4K-9822 [1] NUT  
  4K-9821 [1] SLEEVE  
    (Parts of Fitting 3K6675)
  6H-6699 [1] ADAPTER  
    (Water Temperature)
  3K-6675 [1] FITTING  
  4K-9822 [1] NUT  
  4K-9821 [1] SLEEVE  
    (Parts of 3K6675 Assem.)
  3B-6768 [1] BUSHING  
  1S-0666 [1] ADAPTER  
    (Converter Oil Temperature)
  4H-3001 [1] BUTTON  
  2H-3755 [4] BOLT  
  3B-4505 [4] LOCKWASHER  
  4B-5277 [4] WASHER  
  4K-8203 [1] GUIDE  
  5K-3617 [1] BRACKET ASSEM.  
    (Right Hand)
  5K-3618 [1] BRACKET ASSEM.  
    (Left Hand)
  0S-0509 [4] BOLT  
  9F-2978 [4] NUT (Weld)  
    (2 in each Bracket Assem. 5K3617 and 5K3618)
  3B-4506 [4] LOCKWASHER  
  4B-5271 [4] WASHER  
  1H-5166 [2] CLIP  
  3S-2093 [11] TIE  
  C   INDICATES CHANGE
 

#SEBP10480779
 

2V-9401: DASH & GAUGE GP

2V9401 GAUGES AND DASH GROUP--Top View--Part 1 of 2
Serial No. 81J8971 to 81J9134 inclusive and 31K1650 to 31K1671 inclusive
c163242 SEBP1048
2V9401 DASH & GAUGE GP Parts scheme
  For full view, you need register

Parts for your 950 WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8L-6557 [1] FITTING  
2. 9L-5125 [1] ELBOW  
3. 2V-5957 [1] HOSE ASSEM.  
4. 3J-7355 [3] UNION  
5. 2V-5950 [1] TUBE ASSEM.  
6. 067-6495 [1] ELBOW  
7. 2V-5949 [1] TUBE ASSEM.  
8. 2V-5951 [1] TUBE ASSEM.  
9. 2V-5948 [1] TUBE ASSEM.  
10. 0S-0509 [6] BOLT  
11. 3B-4506 [8] LOCKWASHER  
12. 2V-5958 [1] ANGLE  
13. 5K-3618 [1] BRACKET ASSEM. (L.H.)  
    (Includes)
  9F-2978 [1] NUT (weld)  
14. 2P-1276 [2] UNION  
  2P-1277 [2] NUT  
15. 5S-9068 [1] INDICATOR (fuel pressure)  
  3S-1099 [1] ELBOW  
16. 5M-1065 [1] GAUGE (engine oil pressure)  
17. 7M-7865 [1] INDICATOR (water temperature)  
18. 4K-8516 [1] HEAT INDICATOR  
19. 4H-3218 [1] CLIP  
20. 1D-4717 [2] NUT  
21. 0S-1621 [7] BOLT  
  3B-4508 [7] LOCKWASHER  
  4B-4280 [7] WASHER  
22. 4B-5271 [4] WASHER  
23. 5K-3617 [1] BRACKET ASSEM. (R.H.)  
    (Includes)
  9F-2978 [2] NUT (weld)  
24. 7M-8322 [1] CLIP  
25. 3K-0443 [1] GAUGE (air pressure)  
26. 1S-0666 [1] ADAPTER  
27. 6K-1972 [1] ELBOW  
28. 2V-5956 [1] HOSE ASSEM. .53 m(21.02 in.)  
29. 6H-6699 [1] ADAPTER  
 

Information:

Special Instruction
Installation Of Flush Mounted (*FM), Bottom Strap (**BS) And Flush Mounted Corner Tooth Adapters{6803}
Installation Of Flush Mounted (*FM), Bottom Strap (**BS) And Flush Mounted Corner Tooth Adapters{6803}
Installation Of Improved Cutting Edge Replacement Parts{6100, 6800}
Installation Of Improved Cutting Edge Replacement Parts{6100, 6800}
Procedure To Install Wear Protection On Base Edges And Adapters{6800}
Procedure To Install Wear Protection On Base Edges And Adapters{6800}
Recommendations for Welding J-Series 2-Strap Bucket Adapters to Base Edges{6800, 6801, 6803}
Recommendations for Welding J-Series 2-Strap Bucket Adapters to Base Edges{6800, 6801, 6803}
Installation and Removal Of The Mechanically Attached Wear Plate System
Installation and Removal Of The Mechanically Attached Wear Plate System
Instructions for Welding the "K Series" Adapters{6803}
Instructions for Welding the "K Series" Adapters{6803}
Instructions for Weld Finish of the "K" Series Adapters Installed on Large Wheel Loader Buckets{0679, 6101, 6102, 6104, 6805}
Instructions for Weld Finish of the "K" Series Adapters Installed on Large Wheel Loader Buckets{0679, 6101, 6102, 6104, 6805}
398-6784 Recommended J Series Two Strap Adapter Welding Sequence {0679, 6800, 6801, 6802, 6803, 6805}
398-6784 Recommended J Series Two Strap Adapter Welding Sequence {0679, 6800, 6801, 6802, 6803, 6805}
398-6786 Recommended J Series Flush Mount/Abrasion Adapter Welding Sequence {0679, 6800, 6801, 6802, 6803, 6805}
398-6786 Recommended J Series Flush Mount/Abrasion Adapter Welding Sequence {0679, 6800, 6801, 6802, 6803, 6805}
256-2928 Recommended K Series Two Strap Adapter Welding Sequence {0679, 6800, 6801, 6802, 6803, 6805}
256-2928 Recommended K Series Two Strap Adapter Welding Sequence {0679, 6800, 6801, 6802, 6803, 6805}
256-2930 Recommended K Series Flush Mount/Abrasion Adapter Welding Sequence{0679, 6800, 6801, 6802, 6803, 6805}
256-2930 Recommended K Series Flush Mount/Abrasion Adapter Welding Sequence{0679, 6800, 6801, 6802, 6803, 6805}
Loader and Excavator Bucket Base Edge Assembly Welding Requirements {0679, 6001, 6101, 6102, 6103, 6104, 6110, 6112, 6120, 6122, 6138, 6503, 6523, 6530, 6800, 6801, 6823}
Loader and Excavator Bucket Base Edge Assembly Welding Requirements {0679, 6001, 6101, 6102, 6103, 6104, 6110, 6112, 6120, 6122, 6138, 6503, 6523, 6530, 6800, 6801, 6823}
Installation of Mechanically Attached Sidebar Protectors on Loader Bucket{6101, 6102, 6817}
Installation of Mechanically Attached Sidebar Protectors on Loader Bucket{6101, 6102, 6817}
Repairing Small Cracks In Base Edge Assemblies{0679, 6001, 6120, 6801}
Repairing Small Cracks In Base Edge Assemblies{0679, 6001, 6120, 6801}
Procedure for Installation and Removal of Cat<SUP>&reg;</SUP> Advansys Tips {0751, 6001, 6800, 6805}
Procedure for Installation and Removal of Cat® Advansys Tips {0751, 6001, 6800, 6805}
Instructions for Welding the Cat<SUP>&reg;</SUP> Advansys&trade; Adapters on Excavator and Wheel Loader Buckets {0679, 6001, 6800}
Instructions for Welding the Cat® Advansys™ Adapters on Excavator and Wheel Loader Buckets {0679, 6001, 6800}
Tool Operating Manual
Using the 149-0173 Choker-Style Fabric Basket to Install and Remove Bucket Teeth{0374, 0599, 0751, 6700, 6800}
Using the 149-0173 Choker-Style Fabric Basket to Install and Remove Bucket Teeth{0374, 0599, 0751, 6700, 6800}
Using 149-0174 Non-Choker Style Fabric Baskets to Install or Remove Bucket or Blade Cutting Edges{0374, 0599, 0632, 0700, 0751, 6800}
Using 149-0174 Non-Choker Style Fabric Baskets to Install or Remove Bucket or Blade Cutting Edges{0374, 0599, 0632, 0700, 0751, 6800}
Reuse And Salvage Guidelines
Application of Abrasion Resistant Material{0374, 0679, 0751, 0759, 6800}
Application of Abrasion Resistant Material{0374, 0679, 0751, 0759, 6800}
Service Magazine
6V4163 Bit And 6V4164 Driver Now Available For Removal Of Bolts For Flyweight Carrier{0612,1264}
1981/02/23
New Bucket Cutting Edges Give Longer Service Life And Improved Penetration (Cutting Ability){6801}
1981/11/16
Bucket End Bits Are Thicker Than Bucket Center Edges{6804}
1983/05/30
Procedure To Install Weld-On Half Arrow Cutting Edges{6800,6801,6805}
1984/10/08
Changing Over to New Two-Bolt Corner Guard System{6800,6802,6803}
1993/11/09
The Special Instruction, REHS0597, "Recommendation for Welding 2-Strap Bucket Adapters to Base Edges" is Available {6800, 6801, 6803}
2001/04/23
Pin Remover Helps the Technician Change K Series Bucket Teeth {0751}
2004/02/16
Correct Installation and Removal of Retainers for K Series Bucket Tips {6800, 6803, 6805}
2005/08/01
Preferred Positions for Mechanically Attached Wear Plates (MAWPS) {6100, 6120, 6820}
2009/04/27
New K Series GET Tips are Now Available for Certain Excavators and Wheel Loaders Buckets {6800, 6805}
New K Series GET Tips are Now Available for Certain Excavators and Wheel Loaders Buckets {6800, 6805}

Caterpillar Parts SIS Catalog 950 :

8J-7748 CUTTING EDGE GROUP
CUTTING EDGE GROUP
1U-1468 CUTTING EDGE GROUP
CUTTING EDGE GROUP
1U-1463 CUTTING EDGE GROUP
BIT AND CUTTING EDGE GROUP
1U-1931 BIT AND CUTTING EDGE GROUP
BIT AND CUTTING EDGE GROUP
1U-1930 BIT AND CUTTING EDGE GROUP
BIT AND CUTTING EDGE GROUP
1U-1932 BIT AND CUTTING EDGE GROUP
CUTTING EDGE
8J-8141 CUTTING EDGE
CUTTING EDGE GROUP
8J-9085 CUTTING EDGE GROUP
5K-1614 TOP CLAMP ARRANGEMENT
8K-6278 TOP CLAMP ARRANGEMENT
TOP CLAMP GROUP
6K-5102 TOP CLAMP GROUP
TOP CLAMP GROUP
6K-5102 TOP CLAMP GROUP
FRAME AND CLAMP GROUP
5K-2001 FRAME AND CLAMP GROUP
LOG FORK GROUP
8K-5876 LOG FORK GROUP
GAUGES AND DASH GROUP
7K-2642 GAUGES AND DASH GROUP
GAUGES AND DASH GROUP
7K-2642 GAUGES AND DASH GROUP

Truck sale:

 
 
Caterpillar 950M, Wheel Loaders, Construction
- Wheel Loaders
WESTERN STATES EQUIPMENT
Caterpillar 950M, Wheel Loaders, Construction
385,000 
Caterpillar 950M, Wheel Loaders, Construction
- Wheel Loaders
WYOMING MACHINERY
Caterpillar 950M, Wheel Loaders, Construction
454,718 
Caterpillar 950M, Wheel Loaders, Construction
- Wheel Loaders
WYOMING MACHINERY
 
167,802 
Caterpillar 950M, Wheel Loaders, Construction
- Wheel Loaders
FINANZAUTO S.A.
 
166,716 
Caterpillar 950M, Wheel Loaders, Construction
- Wheel Loaders
FINANZAUTO S.A.
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.