AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

4N8330 BASIC ENGINE ARRANGEMENT--Part 1 of 2 D348 Engine Serial No. 98S1-Up. NOTE: WHEN ORDERING PARTS GIVE ENGINE ARRANGEMENT NUMBER AND SERIAL NUMBER 776


ENGINE ARRANGEMENT
ENGINE AR
BASIC ENGINE
CYLINDER BLOCK GP
PISTON & ROD GP

TRACTOR 776 TRACTOR 14H
 776 TRACTOR 14H00001-00205 (MACHINE) POWERED BY D348 ENGINE SEBP1057 776 14H   (1975)

ENGINE ARRANGEMENT

ENGINE AR
4N-8330 ENGINE AR
4N-8330 ENGINE AR
 

#SEBP10570001
 

4N-8330: ENGINE AR

4N8330 BASIC ENGINE ARRANGEMENT--Part 1 of 2
D348 Engine Serial No. 98S1-Up. NOTE: WHEN ORDERING PARTS GIVE ENGINE
ARRANGEMENT NUMBER AND SERIAL NUMBER
SEBP10570001 SEBP1057
  For full view, you need register

Parts for your 776 TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  4N-6818 Y [1] CRANKSHAFT GROUP  
  4N-7077 Y [1] CRANKSHAFT SEAL GROUP  
  4N-8101 Y [1] CYLINDER BLOCK GROUP  
  4N-8952 Y [6] CONNECTING ROD AND PISTON GROUP  
  4N-7459 Y [1] CAMSHAFT GROUP  
  4N-7460 Y [1] VALVE MECHANISM GROUP  
  4N-7461 Y [1] CAMSHAFT HOUSING GROUP  
  4N-8066 Y [1] VALVE MECHANISM COVER GROUP  
  2S-0711 RY [1] CYLINDER HEAD GROUP  
    - OR -
  7N-9551 RY [1] CYLINDER HEAD GROUP  
  4N-4416 Y [1] PULLEY AND DAMPER GROUP  
  4N-4902 Y [1] FRONT GEAR GROUP  
  4N-5034 Y [1] BELT TIGHTENER GROUP  
  4N-7081 Y [1] ENGINE TRUNNION GROUP  
  4N-7436 Y [1] FRONT HOUSING GROUP  
  6N-1904 Y [1] FAN DRIVE GROUP  
  4N-4903 Y [1] REAR GEAR GROUP  
  4N-7052 Y [1] FLYWHEEL GROUP  
  4N-7080 Y [1] FLYWHEEL HOUSING GROUP  
  9S-4633 Y [1] HYDRAULIC PUMP AND AIR COMPRESSOR DRIVE GROUP  
  4N-6135 Y [1] OIL PAN GROUP  
  4N-6137 Y [1] OIL LEVEL GAUGE GROUP  
  4N-6136 Y [1] ENGINE OIL LINES GROUP  
  4N-6138 Y [1] OIL FILLER GROUP  
  4N-8117 Y [1] ENGINE OIL PUMP GROUP  
    SERIAL NO. 98S1 TO 98S1081 INCLUSIVE
    - OR -
  8N-1926 Y [1] ENGINE OIL PUMP GROUP  
    SERIAL NO. 98S1082-UP
  7S-7052 Y [1] OIL FILTER GROUP  
    - OR -
  2W-0577 Y [1] OIL FILTER GROUP  
  8S-6180 Y [1] BREATHER GROUP  
  R   REMFG PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP10570002
 

4N-8330: ENGINE AR

4N8330 BASIC ENGINE ARRANGEMENT--Part 2 of 2
D348 Engine Serial No. 98S1-Up. NOTE: WHEN ORDERING
PARTS GIVE ENGINE ARRANGEMENT NUMBER AND SERIAL NUMBER
SEBP10570002 SEBP1057
  For full view, you need register

Parts for your 776 TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  1N-8576 Y [1] AFTERCOOLER WATER PUMP GROUP  
  4N-4598 Y [1] JACKET WATER LINES GROUP  
  4N-4661 Y [1] AFTERCOOLER WATER LINES GROUP  
  4N-4726 Y [1] ENGINE OIL COOLER GROUP  
  4N-4836 Y [1] BRAKE AND TORQUE CONVERTER COOLER GROUP  
  4N-7718 Y [1] AFTERCOOLER GROUP  
  6N-6366 RY [1] WATER PUMP GROUP  
  2N-6984 Y [1] EXHAUST MANIFOLD GROUP  
  4N-4433 Y [1] AIR COMPRESSOR GROUP  
  4N-4612 Y [1] TURBOCHARGER OIL LINES GROUP  
  4N-7070 Y [1] TURBOCHARGER GROUP  
  4N-8273 Y [1] AIR LINES GROUP  
  4N-4358 Y [1] GOVERNOR TORQUE SPRING GROUP  
  4N-7704 Y [1] FUEL INJECTION LINES GROUP  
  4N-7776 Y [1] SERVICE METER GROUP  
    SERIAL NO. 98S1 TO 98S735 INCLUSIVE
  4N-8027 Y [1] TACHOMETER DRIVE GROUP  
  4N-8294 Y [1] FUEL RATIO CONTROL GROUP  
  4N-8295 Y [1] GOVERNOR AND FUEL INJECTION PUMP GROUP  
  8S-2001 Y [1] FUEL PRIMING PUMP GROUP  
  8S-2792 Y [1] FUEL TRANSFER PUMP GROUP  
  8S-2812 Y [1] FUEL FILTER GROUP  
  7N-9847 Y [1] SOLENOID SHUT-OFF GROUP  
  4N-8116 Y [1] ELECTRIC STARTING MOTOR GROUP  
  4N-9600 Y [1] COOLANT FLOW SWITCH GROUP  
    SERIAL NO. 98S124-UP
  2S-3262 Y [1] GLOW PLUG AND WIRING GROUP  
  9S-3186 Y [1] ALTERNATOR GROUP  
  R   REMFG PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP10570003
 

4N-8101: CYLINDER BLOCK GP

4N8101 CYLINDER BLOCK GROUP
Engine Serial No. 98S1 to 98S102 inclusive
6N7329 Block parts are shown on Page 8
c161813 SEBP1057
4N8101 CYLINDER BLOCK GP Parts scheme
  For full view, you need register

Parts for your 776 TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5P-4716 [4] BOLT  
2. 8S-6019 [2] PLATE  
  8S-6020 [2] GASKET  
3. 1S-7104 [2] SEAL  
4. 1P-6812 [2] ROD  
5. 8S-7669 [4] STUD  
6. 2S-3206 [1] ADAPTER  
  8M-4990 [2] SEAL  
7. 1N-8068 [1] PLATE ASSEM. (R.H.)  
    (Includes)
  8M-5362 [2] BOSS  
8. 7F-6252 [1] FITTING  
9. 7M-5007 [1] FITTING  
10. 3J-3532 [1] LUG  
11. 3N-7705 [1] PLATE ASSEM. (L.H.)  
    (Includes)
11. 8M-5362 [1] BOSS  
  7F-6252 [1] FITTING  
  3J-3532 [1] LUG  
12. 3S-7681 [2] GASKET  
13. 0S-1594 [72] BOLT  
14. 5M-2894 [74] WASHER  
15. 5S-9501 [1] COVER  
  7S-1073 [1] GASKET  
16. 4N-8986 [12] TUBE ASSEM.  
    (Each Includes)
  6N-1436 [1] PIN  
17. 1S-5976 [12] SCREW  
  7M-7205 [12] LOCK  
18. 6N-7329 Y [1] BLOCK ASSEM.  
    (Separate Illustration)
19. 3B-0551 [2] PLUG  
20. 8M-9307 [2] PLUG  
  6F-7062 [2] WASHER  
21. 3N-2854 [1] COVER  
  7S-0531 [1] GASKET  
22. 5M-6214 [2] PLUG  
23. 1B-4203 [2] NUT  
24. 6N-8700 C [12] LINER  
  9L-5854 [12] BAND  
  3S-3978 [36] SEAL  
25. 2S-4129 [1] SHAFT  
26. 0L-1021 [1] PLUG 1.75 in. (4.44 cm) diameter  
  2S-4241 [1] PLUG 2.14 in. (5.43 cm) diameter  
27. 1S-0521 [2] FERRULE 3.51 cm(1.38 in.) long  
  8M-4986 C [2] SEAL  
28. 3S-4507 [1] FERRULE 3.18 cm(1.25 in.) long  
  8M-5251 C [1] SEAL  
  C   INDICATES CHANGE
  Y   SEPARATE ILLUSTRATION
 

#SEBP10570004
 

4N-8101: CYLINDER BLOCK GP

4N8101 CYLINDER BLOCK GROUP
Engine Serial No. 98S103 to 98S608 inclusive
6N7329 Block parts are shown on Page 8
c161814 SEBP1057
4N8101 CYLINDER BLOCK GP Parts scheme
  For full view, you need register

Parts for your 776 TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5P-4716 [4] BOLT  
2. 8S-6019 [2] PLATE  
  8S-6020 [2] GASKET  
3. 1S-7104 [2] SEAL  
4. 1P-6812 [2] ROD  
5. 8S-7669 [4] STUD  
6. 2S-3206 [1] ADAPTER  
  8M-4990 [2] SEAL  
7. 1N-8068 [1] PLATE ASSEM. (R.H.)  
    (Includes)
  8M-5362 [2] BOSS  
8. 7F-6252 [1] FITTING  
9. 7M-5007 [1] FITTING  
10. 3J-3532 [1] LUG  
11. 3N-7705 [1] PLATE ASSEM. (L.H.)  
    (Includes)
  8M-5362 [1] BOSS  
  7F-6252 [1] FITTING  
  3J-3532 [1] LUG  
12. 3S-7681 [2] GASKET  
13. 0S-1594 [72] BOLT  
14. 5M-2894 [74] WASHER  
15. 5S-9501 [1] COVER  
  7S-1073 [1] GASKET  
16. 4N-8986 [12] TUBE ASSEM.  
    (Each Includes)
  6N-1436 [1] PIN  
17. 1S-5976 [12] SCREW  
  7M-7205 [12] LOCK  
18. 6N-7329 Y [1] BLOCK ASSEM.  
    (Separate Illustration)
19. 3B-0551 [2] PLUG  
20. 8M-9307 [2] PLUG  
  6F-7062 [2] WASHER  
21. 6N-8932 [1] COVER ASSEM.  
    (Includes)
  2K-9111 [1] PIN  
  7S-0531 [1] GASKET  
22. 5M-6214 [2] PLUG  
23. 1B-4203 [2] NUT  
34. 6N-8700 [12] LINER  
  9L-5854 [12] BAND  
  3S-3978 [36] SEAL  
25. 2S-4129 [1] SHAFT  
26. 0L-1021 [1] PLUG 4.44 cm(1.75 in.) diameter  
  2S-4241 [1] PLUG 5.43 cm(2.14 in.) diameter  
27. 1S-0521 [2] FERRULE 3.51 cm(1.28 in.) long  
  8M-4986 C [2] SEAL  
28. 5M-6213 [1] PLUG  
29. 3S-4507 [1] FERRULE 3.18 cm(1.25 in.) long  
  8M-5251 C [1] SEAL  
  C   INDICATES CHANGE
  Y   SEPARATE ILLUSTRATION
 

#SEBP10570005
 

4N-8101: CYLINDER BLOCK GP

4N8101 CYLINDER BLOCK GROUP
Engine Serial No. 98S609 to 98S778 inclusive
6N7329 Block parts are shown on Page 8
c167958 SEBP1057
4N8101 CYLINDER BLOCK GP Parts scheme
  For full view, you need register

Parts for your 776 TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5P-4716 [4] BOLT  
2. 8S-6019 [2] PLATE  
  8S-6020 [2] GASKET  
3. 1S-7104 [2] SEAL  
4. 1P-6812 [2] ROD  
5. 8S-7669 [4] STUD  
6. 2S-3206 [1] ADAPTER  
  8M-4990 [2] SEAL  
7. 1N-8068 [1] PLATE ASSEM. (R.H.)  
    (Includes)
  8M-5362 [2] BOSS  
8. 7F-6252 [1] FITTING  
9. 7M-5007 [1] FITTING  
10. 3J-3532 [1] LUG  
11. 3N-7705 [1] PLATE ASSEM. (L.H.)  
    (Includes)
  8M-5362 [1] BOSS  
  7F-6252 [1] FITTING  
  3J-3532 [1] LUG  
12. 7N-5515 C [2] GASKET  
13. 0S-1594 C [68] BOLT  
14. 5M-2894 C [72] WASHER  
15. 5S-9501 [1] COVER  
  7S-1073 [1] GASKET  
16. 4N-8986 [12] TUBE ASSEM.  
    (Each Includes)
  6N-1436 [1] PIN  
17. 1S-5976 [12] SCREW  
  7M-7205 [12] LOCK  
18. 6N-7329 Y [1] BLOCK ASSEM.  
    (Separate Illustration)
19. 3B-0551 [2] PLUG  
20. 8M-9307 [2] PLUG  
  6F-7062 [2] WASHER  
21. 7N-5813 C [1] COVER ASSEM.  
    (Includes)
  2K-9111 [1] PIN  
  7S-0531 [1] GASKET  
22. 5M-6214 [2] PLUG  
23. 1B-4203 [2] NUT  
24. 6N-8700 [12] LINER  
  9L-5854 [12] BAND  
  3S-3978 [36] SEAL  
25. 2S-4129 [1] SHAFT  
26. 0L-1021 [1] PLUG 4.44 cm(1.75 in.) diameter  
  2S-4241 [1] PLUG 5.43 cm(2.14 in.) diameter  
27. 1S-0521 [2] FERRULE 3.51 cm(1.28 in.) long  
  8M-4986 [2] SEAL  
28. 9S-4191 C [1] PLUG  
29. 3S-4507 [1] FERRULE 3.18 cm(1.25 in.) long  
  8M-5251 [1] SEAL  
30. 0S-1588 C [4] BOLT  
31. 033-6042 C [1] SEAL  
  C   INDICATES CHANGE
  Y   SEPARATE ILLUSTRATION
 

#SEBP10570006
 

4N-8101: CYLINDER BLOCK GP

4N8101 CYLINDER BLOCK GROUP
Engine Serial No. 98S779 to 98S2393 inclusive. 6N7329 Block parts are shown on Page 8
c170840 SEBP1057
4N8101 CYLINDER BLOCK GP Parts scheme
  For full view, you need register

Parts for your 776 TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5P-4716 [4] BOLT  
2. 8S-6019 [2] PLATE  
  7N-9525 C [2] GASKET  
3. 1S-7104 [2] SEAL  
4. 1P-6812 [2] ROD  
5. 033-6042 [1] SEAL  
6. 2S-3206 [1] ADAPTER  
  8M-4990 [2] SEAL  
7. 1N-8068 [1] PLATE ASSEM. (R.H.)  
    (Includes)
  8M-5362 [2] BOSS  
8. 7F-6252 [1] FITTING  
9. 7M-5007 [1] FITTING  
10. 3J-3532 [1] LUG  
11. 3N-7705 [1] PLATE ASSEM. (L.H.)  
    (Includes)
  8M-5362 [1] BOSS  
  7F-6252 [1] FITTING  
  3J-3532 [1] LUG  
12. 7N-5515 [2] GASKET  
13. 0S-1594 [68] BOLT  
14. 5M-2894 [72] WASHER  
15. 5S-9501 [1] COVER  
  7S-1073 [1] GASKET  
16. 8N-2975 C [12] TUBE ASSEM.  
    (Each Includes)
  6N-1436 [1] PIN  
17. 1S-5976 [12] SCREW  
  7M-7205 [12] LOCK  
18. 6N-7329 Y [1] BLOCK ASSEM.  
    (Separate Illustration)
19. 3B-0551 [2] PLUG  
20. 8M-9307 [2] PLUG  
  6F-7062 [2] WASHER  
21. 7N-5813 [1] COVER ASSEM.  
    (Includes)
  2K-9111 [1] PIN  
  7S-0531 [1] GASKET  
22. 5M-6214 [2] PLUG  
23. 1B-4203 [2] NUT  
24. 6N-8700 [12] LINER  
  9L-5854 [12] BAND  
  3S-3978 [36] SEAL  
25. 2S-4129 [1] SHAFT  
26. 0L-1021 [1] PLUG 4.44 cm(1.75 in.) diameter  
  2S-4241 [1] PLUG 5.43 cm(2.14 in.) diameter  
27. 1S-0521 [2] FERRULE 3.51 cm(1.28 in.) long  
  8M-4986 [2] SEAL  
28. 9S-4191 [1] PLUG  
29. 3S-4507 [1] FERRULE 3.18 cm(1.25 in.) long  
  8M-5251 [1] SEAL  
30. 0S-1588 [4] BOLT  
  C   INDICATES CHANGE
  Y   SEPARATE ILLUSTRATION
 

#SEBP10570007
 

4N-8101: CYLINDER BLOCK GP

4N8101 CYLINDER BLOCK GROUP
Engine Serial No. 98S2394-Up
6N7329 Block parts are shown on Page 8
c305465 SEBP1057
4N8101 CYLINDER BLOCK GP Parts scheme
  For full view, you need register

Parts for your 776 TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5P-4716 [4] BOLT  
2. 8S-6019 [2] PLATE  
  7N-9525 [2] GASKET  
3. 1S-7104 [2] SEAL  
4. 1P-6812 [2] ROD  
5. 033-6042 [1] SEAL  
6. 2S-3206 [1] ADAPTER  
  8M-4990 [2] SEAL  
7. 1N-8068 [1] PLATE ASSEM. (R.H.)  
    (Includes)
  8M-5362 [2] BOSS  
8. 7F-6252 [1] FITTING  
9. 7M-5007 [1] FITTING  
10. 3J-3532 [1] LUG  
11. 3N-7705 [1] PLATE ASSEM. (L.H.)  
    (Includes)
  8M-5362 [1] BOSS  
  7F-6252 [1] FITTING  
  3J-3532 [1] LUG  
12. 7N-5515 [2] GASKET  
13. 0S-1594 C [67] BOLT  
14. 5M-2894 C [71] WASHER  
15. 5S-9501 [1] COVER  
  7S-1073 [1] GASKET  
16. 8N-2975 [12] TUBE ASSEM.  
    (Each Includes)
  6N-1436 [1] PIN  
17. 1S-5976 [12] SCREW  
  7M-7205 [12] LOCK  
18. 6N-7329 Y [1] BLOCK ASSEM.  
    (Separate Illustration)
19. 3B-0551 [2] PLUG  
20. 8M-9307 [2] PLUG  
  6F-7062 [2] WASHER  
21. 2W-0541 C [1] COVER ASSEM.  
    (Includes)
  2K-9111 [1] PIN  
  7S-0531 [1] GASKET  
22. 5M-6214 C [2] PLUG  
23. 1B-4203 [2] NUT  
24. 6N-8700 [12] LINER  
  9L-5854 [12] BAND  
  3S-3978 [36] SEAL  
25. 2S-4129 [1] SHAFT  
26. 0L-1021 [1] PLUG 4.44 cm(1.75 in.) diameter  
  2S-4241 [1] PLUG 5.43 cm(2.14 in.) diameter  
27. 1S-0521 [2] FERRULE 3.51 cm(1.28 in.) long  
  8M-4986 [2] SEAL  
28. 9S-4191 [1] PLUG  
29. 3S-4507 [1] FERRULE 3.18 cm(1.25 in.) long  
  8M-5251 [1] SEAL  
30. 0S-1591 C [4] BOLT  
  C   INDICATES CHANGE
  Y   SEPARATE ILLUSTRATION
 

#SEBP10570008
 

6N-7329: CYLINDER BLOCK AS

6N7329 CYLINDER BLOCK ASSEMBLY
Part of 4N8101 Cylinder Block Group shown on Pages 6 and 7
c207297 SEBP1057
6N7329 CYLINDER BLOCK AS Parts scheme
  For full view, you need register

Parts for your 776 TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5H-4279 [ 2] PLUG  
2. 5B-5812 [ 2] DOWEL  
3. 0L-0659 [ 2] STUD  
4. 9S-4086 [ 4] DOWEL  
5. 9S-4087 [ 2] DOWEL  
6. 3J-5390 [ 2] PLUG  
7. 5M-6213 [ 1] PLUG  
8. 4B-5387 [ 1] PLUG  
9. 2H-1190 [ 12] DOWEL  
10. 2A-3576 [ 4] DOWEL  
11. 1B-5170 [ 2] PLUG  
12. 5S-5188 [ 5] CAP ASSEM. (front & intermediate)  
    (Includes)
13. 4F-2609 [ 1] DOWEL  
14. 9S-1218 [ 2] CAP (rear & center)  
15. 4N-3315 [ 1] SHAFT (idler)  
16. 2S-5663 [ 1] TUBE  
17. 9S-9752 [ 28] STUD  
  1A-5666 [ 28] NUT  
  4D-6419 [ 28] WASHER  
 

#SEBP10570009
 

4N-8952: PISTON & ROD GP

4N8952 CONNECTING ROD AND PISTON GROUP--8 Required
Engine Serial No. 98S1 to 98S1251 inclusive
c212447 SEBP1057
4N8952 PISTON & ROD GP Parts scheme
  For full view, you need register

Parts for your 776 TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6N-9682 C [ 2] PISTON ASSEM.  
    (Each Includes)
2. 9S-2263 [ 1] RING (top)  
3. 9S-2264 [ 1] RING (intermediate)  
4. 1P-0708 [ 1] RING (oil)  
5. 3F-8513 [ 4] RETAINER  
6. 2S-1602 [ 2] PIN  
7. 4N-9001 [ 1] ROD ASSEM. (odd cylinder)  
    (Includes)
  6N-3506 C [ 2] DOWEL  
8. 9S-9748 [ 2] BOLT  
9. 1S-2353 [ 1] BEARING  
10. 4N-9002 [ 1] ROD ASSEM. (even cylinder)  
    (Includes)
  6N-3506 C [ 2] DOWEL  
11. 1S-2353 [ 1] BEARING  
12. 9S-9748 [ 2] BOLT  
13. 6N-6991 C [ 2] BEARING (standard)  
  6N-9968 C H [ 2] BEARING  
    Standard I.D. .254 mm(.010 in.) Oversize O.D.
  6N-7042 C [ 2] BEARING  
    .635 mm(.025 in.) Undersize I.D.
  6N-9967 C H [ 2] BEARING  
    .635 mm(.025 in.) Undersize I.D.
    .254 mm(.010 in.) Oversize O.D.
  6N-7047 C [ 2] BEARING  
    1.27 mm(.050 in.) Undersize I.D.
  6N-9966 C H [ 2] BEARING  
    1.27 mm(.050 in.) Undersize I.D.
    .254 mm(.010 in.) Oversize O.D.
  1P-0734 [ 1] PISTON RING REPLACEMENT GRP.  
    (Includes a complete set of rings for one piston)
    INDICATES CHANGE
    WARNING-TO BE USED ONLY WITH
 

Information:

Truck Engine News
Service Magazines, Engine News, and Truck Engine News Articles Moved from Dealer.cat.com to SISweb {0374, 1000, 7000}
2015/09/23
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
Changes to the Way Serial Numbers are Displayed in Truck Engine News {0374, 1000, 7000}
Changes to the Way Serial Numbers are Displayed in Truck Engine News {0374, 1000, 7000}
Engine News
Improved Registration Process for Retrofit Products {1000, 7000}
2011/04/15
Service Magazines, Engine News, and Truck Engine News Articles Moved from Dealer.cat.com to SISweb {0374, 1000, 7000}
2015/09/25
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
Changes to the Way Serial Numbers are Displayed in Engine News {0374, 1000, 7000}
Changes to the Way Serial Numbers are Displayed in Engine News {0374, 1000, 7000}
Procedure for Cleaning an Engine Lubrication System when Contaminated with Engine Coolant Containing Antifreeze {1000, 1348, 1395}
Procedure for Cleaning an Engine Lubrication System when Contaminated with Engine Coolant Containing Antifreeze {1000, 1348, 1395}
Special Instruction
Troubleshooting Engine Vibration In Vehicular Equipment{1000}
Troubleshooting Engine Vibration In Vehicular Equipment{1000}
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
Use of the 4C3502 Engine Repair Indicator Kit{0781, 1000}
Use of the 4C3502 Engine Repair Indicator Kit{0781, 1000}
Using The 5P6524 Engine Timing Indicator Group And 1P540 Flow Checking Tool Group{0782, 1000}
Using The 5P6524 Engine Timing Indicator Group And 1P540 Flow Checking Tool Group{0782, 1000}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Caterpillar DPF Installation and Operation Guide for Diesel Engines - California Only {1000, 1091}
Caterpillar DPF Installation and Operation Guide for Diesel Engines - California Only {1000, 1091}
Generation 3 DPFdm Diagnostic Module Installation Manual - California Only {1000, 1091, 7490}
Generation 3 DPFdm Diagnostic Module Installation Manual - California Only {1000, 1091, 7490}
Storage Procedure for Caterpillar Products {0355, 1000, 7000}
Storage Procedure for Caterpillar Products {0355, 1000, 7000}
Instructions to Register the Retrofit and Submit Service Reporting {1000, 3000, 7000, 7570}
Instructions to Register the Retrofit and Submit Service Reporting {1000, 3000, 7000, 7570}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Differences in Appearance of Cat <SUP>&reg;</SUP> Reman Parts when Compared to New Parts {1000, 1250}
Differences in Appearance of Cat ® Reman Parts when Compared to New Parts {1000, 1250}
Introduction to Visualization Service Procedure (VSP) {0374, 1000, 7000}
Introduction to Visualization Service Procedure (VSP) {0374, 1000, 7000}
Technical Information Bulletin
A Recommendation for Initial Parts Stock Quantities Will Now Be Included in Service Letters{1000, 7000, 7751, 7752}
A Recommendation for Initial Parts Stock Quantities Will Now Be Included in Service Letters{1000, 7000, 7751, 7752}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
Specifications
Engine Design
5.4" BORE, 60 V12 VEHICULAR ENGINE
Tool Operating Manual
Using the Caterpillar Fuel Flow Monitor System{0782, 1000, 1250}
Using the Caterpillar Fuel Flow Monitor System{0782, 1000, 1250}
Using the 1U-8860 Large Engine Blowby Pickup Group and the 8T-2700 Blowby/Airflow Indicator{0781, 0785, 1000}
Using the 1U-8860 Large Engine Blowby Pickup Group and the 8T-2700 Blowby/Airflow Indicator{0781, 0785, 1000}
NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}
NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}
142-6893 Adjustable Lifting Bracket Group{0599, 0629, 0632, 0701, 0717, 1000, 4000, 7000}
142-6893 Adjustable Lifting Bracket Group{0599, 0629, 0632, 0701, 0717, 1000, 4000, 7000}
Reuse And Salvage Guidelines
Reuse and Salvage for Mechanical Governor Groups in 3114, 3116, and 3126 Engines Equipped with Mechanical Unit Injectors (MUI) {0374, 1000, 1050, 1250, 1300}
Reuse and Salvage for Mechanical Governor Groups in 3114, 3116, and 3126 Engines Equipped with Mechanical Unit Injectors (MUI) {0374, 1000, 1050, 1250, 1300}
Reuse and Testing of Fuel Injection Pump Housing {0374, 1000, 1250, 1300}
Reuse and Testing of Fuel Injection Pump Housing {0374, 1000, 1250, 1300}
Contamination Control of Rebuilt Engines by Using a Particle Counting Process Patent Pending{1000, 1300}
Contamination Control of Rebuilt Engines by Using a Particle Counting Process Patent Pending{1000, 1300}
Filtration Procedure for Rebuilt Engines {0680, 0768, 1000, 1300}
Filtration Procedure for Rebuilt Engines {0680, 0768, 1000, 1300}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
Cleaning Components with Carbon Dioxide (CO<SUB>2</SUB>) {0680, 1000, 7000}
Cleaning Components with Carbon Dioxide (CO2) {0680, 1000, 7000}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Reuse and Salvage Guidelines Subscriptions {0374, 0599, 1000, 7000}
Reuse and Salvage Guidelines Subscriptions {0374, 0599, 1000, 7000}
Scrap Barrel Analysis {0374, 0599, 0700, 0701, 0738, 1000, 7000}
Scrap Barrel Analysis {0374, 0599, 0700, 0701, 0738, 1000, 7000}
Fundamentals of Plasma Transferred Wire Arc (PTWA) Spray for Reconditioning Components {0374, 0599, 0679, 1000}
Fundamentals of Plasma Transferred Wire Arc (PTWA) Spray for Reconditioning Components {0374, 0599, 0679, 1000}
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Contamination Control of Rebuilt Engines by Using a Particle Counting Process Patent Pending{1000, 1300}
Contamination Control of Rebuilt Engines by Using a Particle Counting Process Patent Pending{1000, 1300}
Filtration Procedure for Rebuilt Engines {0680, 0768, 1000, 1300}
Filtration Procedure for Rebuilt Engines {0680, 0768, 1000, 1300}
Applied Failure Analysis
Failure Analysis Report - AFA Good Report {0374, 1000}
Failure Analysis Report - AFA Good Report {0374, 1000}
Reference Guide for a Proper Failure Analysis by CAT Dealer {0374, 1000}
Reference Guide for a Proper Failure Analysis by CAT Dealer {0374, 1000}
Product Evaluation Report - AFA Bad Report {0374, 1000}
Product Evaluation Report - AFA Bad Report {0374, 1000}
Information Release Memo
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Technical Analysis
Technical Analysis 1 (TA1) Visual Inspection for Off-Highway Trucks {0372, 0374, 1000, 7000, 753S, 7565}
Technical Analysis 1 (TA1) Visual Inspection for Off-Highway Trucks {0372, 0374, 1000, 7000, 753S, 7565}
Disassembly and Assembly
Engine And Torque Converter
D348 VEHICULAR ENGINE FOR 776 TRACTOR & 777 TRUCK
Service Magazine
Engine Storage; Engine Start-Up After Storage{1000}
1982/02/22
Separate Valve Stem Gauges Available{0653,1000}
1982/06/07
Analyzing A Major Engine Failure{1000}
1982/07/19
New Bearing Used In Air Starting Motor {1451}
1982/09/13
Reference Chart for Engine Improvements{0374,1000}
1982/10/25
Correct Time Intervals For Operation Of 9G9287 Electronic (Engine Shutdown) Control Group{1000,1259}
1985/03/04
New Index Lists Engine Special Instructions By SMCS Code{1000,0374}
1986/04/07
Improved 5P3000 Engine And Transmission Shipping Stand Assembly; Modification Available For Stands Already In Use{0640}
1977/04/25
Erratic Transmission Shift Can Be Caused By Cylinder Assembly In Engine Governor Control{1265,3150,1269}
1977/10/17
Alternator/Generator Output Test On The Engine{1401,1404,1405,1406}
1987/05/04
The Caterpillar Fuel Flow Monitor System Available {0782,1000,1250}
1987/05/11
Microfiche For Replacement Engine Bills Of Material {0374,1000}
1987/10/26
Explanation Of Nomenclature Used In Engine Performance{1000,0374}
1978/05/15
Cranking Speeds Necessary To Start Diesel Engines{0374,1000,1450}
1979/09/24
Use 143-5455 Lifting Bracket for Torque Converter Removal and Installation {1003,3101,4092}
1998/08/10
A New Screen In The TMI System Provides The Status Of Emission Certification Of Engines {1000}
2000/12/25
Caterpillar's Position On The Use Of Biodiesel Fuel In Caterpillar Engines {1000}
2012/09/17
A List Of Contacts For Caterpillar Product Support Is Available {1000, 4450, 7000}
2002/03/25
Proper Long Term Storage of Caterpillar Products {0355, 1000, 7000}
2009/04/27
Changes To Caterpillar Incident Reporting Field Use Form And DSN Incident Report Entry Screens {1000, 7000}
2013/04/17
Redesigned Fluid Sampling Valves Are Now Available for All Cat Products {7542}
2011/02/11
Improved Registration Process for Retrofit Products {1000, 3000, 7000, 7570}
2011/02/17
TA2 (Technical Analysis) Inspections are Now Available on SIS {0372, 1000, 7000, 753T, 7565}
2013/01/10
Service Magazines, Engine News, and Truck Engine News Articles Moved from Dealer.cat.com to SISweb {0374, 1000, 7000}
2015/09/23
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
Military Electronic Technician (Military ET) Is Now Available For Military Personnel {0374, 0376, 0599, 1000, 7000, 7610, 7620}
Military Electronic Technician (Military ET) Is Now Available For Military Personnel {0374, 0376, 0599, 1000, 7000, 7610, 7620}
Process to Print Collage Schematics {0374, 1000, 7000}
Process to Print Collage Schematics {0374, 1000, 7000}
Changes to the Way Serial Numbers are Displayed on Service Magazines {0374, 1000, 7000}
Changes to the Way Serial Numbers are Displayed on Service Magazines {0374, 1000, 7000}
A New Process Is Available to Request Service Animations for Certain Service Information Procedures {1000, 7000}
A New Process Is Available to Request Service Animations for Certain Service Information Procedures {1000, 7000}

Caterpillar Parts SIS Catalog 776 :

4N-8330 ENGINE AR
CYLINDER BLOCK GP
4N-8101 CYLINDER BLOCK GP
CYLINDER BLOCK GP
4N-8101 CYLINDER BLOCK GP
CYLINDER BLOCK GP
4N-8101 CYLINDER BLOCK GP
CYLINDER BLOCK GP
4N-8101 CYLINDER BLOCK GP
CYLINDER BLOCK GP
4N-8101 CYLINDER BLOCK GP
CYLINDER BLOCK AS
6N-7329 CYLINDER BLOCK AS
PISTON & ROD GP
4N-8952 PISTON & ROD GP

Truck sale:

 
 
CAT 776

RD Williams Parts
 
 
CAT 776

RD Williams Parts
 
 
CAT 776

RD Williams Parts
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.