ELECTRICAL AND STARTING SYSTEM
STARTING MOTOR GPSOLENOID GP
ELECTRICAL AND STARTING SYSTEM
STARTING MOTOR GP#SEBP10630190
7S-4090: STARTING MOTOR GP-ELECTRIC
7S4090 ELECTRIC STARTING MOTOR GROUP -- 24 Volt -- Type 3
7N1285 and 9G4337 Motor parts are shown on Pages
71A, 71B and Pages 73A and 73B
7N1285 and 9G4337 Motor parts are shown on Pages
71A, 71B and Pages 73A and 73B
Parts for your 130G MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7N-1285 Y | [1] | MOTOR GROUP | |
| - OR - | ||||
| 9G-4337 CY | [1] | MOTOR GROUP | ||
| (Separate Illustration) | ||||
| 2. | 7J-8902 | [3] | BOLT | |
| 8D-5054 | [3] | WASHER | ||
| 3. | 4H-7869 | [1] | GASKET | |
| 4. | 9F-4337 | [1] | WIRE ASSEM. | |
| (Includes) | ||||
| 5P-6641 CD | WIRE .228m(9 in.) | |||
| 5. | 2L-8052 C | [1] | TERMINAL | |
| 6. | 2L-8054 C | [1] | TERMINAL | |
| C | INDICATES CHANGE | |||
| Y | SEPARATE ILLUSTRATION | |||
| D | ORDER BY THE METER | |||
#SEBP10630191
2P-2502: STARTING MOTOR GP-ELECTRIC
2P2502 ELECTRIC STARTING MOTOR GROUP--24 Volt--Delco-Remy--Part 1
Part of 7S4090 Electric Starting Motor Group shown on Page 69
6N5123 Switch parts are shown on Page 69
Part of 7S4090 Electric Starting Motor Group shown on Page 69
6N5123 Switch parts are shown on Page 69
Parts for your 130G MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7F-4556 | [9] | BOLT | |
| 1L-4789 | [9] | LOCKWASHER | ||
| 2. | 4M-0189 | [2] | SEAL | |
| 3. | 2L-8166 | [1] | WASHER | |
| 4. | 3P-0173 | [1] | FRAME ASSEM. | |
| 5. | 9F-2247 | [1] | PLUG | |
| 9F-2547 | [1] | WICK | ||
| 6. | 3P-0170 | [1] | BUSHING | |
| 7. | 6N-5123 YC | [1] | SWITCH ASSEM. | |
| (Separate Illustration) | ||||
| 8. | 6H-3622 | [4] | SCREW ASSEM. | |
| 9. | 4M-1850 | [1] | HOUSING ASSEM. | |
| 2B-4602 | [1] | PLUG | ||
| 9F-2547 | [1] | WICK | ||
| 10. | 1M-9968 | [1] | BUSHING | |
| 11. | 2F-6678 | [1] | SEAL | |
| 12. | 5L-9056 | [4] | BRUSH | |
| 13. | 8M-5814 | [4] | SCREW ASSEM. | |
| 14. | 066-5545 | [2] | HOLDER | |
| 15. | 5L-8884 | [2] | SPRING | |
| 16. | 5L-8887 | [2] | SUPPORT ASSEM. | |
| (Includes) | ||||
| 17. | 9F-3483 | [1] | LEAD | |
| 18. | 4B-4441 | [2] | RIVET | |
| 19. | 5L-8888 | [1] | PIN | |
| 20. | 3L-3867 | [2] | SCREW | |
| 4B-2047 | [2] | NUT | ||
| 7H-2079 | [2] | LOCKWASHER | ||
| 21. | 4M-8472 | [2] | HOLDER | |
| 22. | 1S-0297 | [1] | HOUSING ASSEM. | |
| (Includes) | ||||
| 23. | 4M-1896 | [1] | BUSHING | |
| 24. | 2P-4708 | [1] | DRIVE ASSEM. (800068) | |
| (Includes) | ||||
| 25. | 9S-9771 | [1] | PINION | |
| 9S-9770 | [1] | SPRING | ||
| -OR- | ||||
| 26. | 6N-3827 CH | [1] | DRIVE ASSEM. (480118) | |
| 27. | 4M-1851 | [1] | GASKET | |
| 28. | 1M-9971 | [1] | SPACER | |
| 29. | 8H-1141 | [4] | SHOE | |
| 30. | 3R-8797 | [8] | SCREW ASSEM. | |
| 31. | 3P-0174 | [1] | COIL ASSEM. | |
| 32. | 1H-2629 | [1] | STRIP | |
| 33. | 4M-1833 | [5] | SCREW 1.5 in. (3.81 cm) long | |
| 7M-0336 | [1] | SCREW .86 in. (2.18 cm) long | ||
| THE FOLLOWING REPAIR KITS ARE AVAILABLE FOR 2P4708 DRIVE ASSEM.: | ||||
| 9S-9825 | [1] | KIT (cup) | ||
| 4S-9459 | [1] | KIT (washer) | ||
| C | INDICATES CHANGE | |||
| Y | SEPARATE ILLUSTRATION | |||
| H | NOT PART OF 2P2502 STARTING MO | |||
#SEBP10630192
2P-2502: STARTING MOTOR GP-ELECTRIC
2P2502 ELECTRIC STARTING MOTOR GROUP--24 Volt--Delco-Remy--Part 2
Part of 7S4090 Electric Starting Motor Group shown on Page 69
Part of 7S4090 Electric Starting Motor Group shown on Page 69
Parts for your 130G MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3L-3380 C | [1] | BUSHING | |
| 2. | 3J-4818 | [2] | LOCKWASHER | |
| 3. | 3H-3680 | [2] | NUT | |
| 4. | 0S-1587 C | [1] | BOLT | |
| 5. | 3H-3681 | [2] | NUT | |
| 6. | 9H-3757 | [2] | WASHER (large) | |
| 7F-3494 C | [2] | WASHER (small) | ||
| 7. | 9F-4976 | [1] | LOCKWASHER | |
| 8. | 4M-1841 | [1] | CONNECTOR | |
| 9. | 5L-8877 | [1] | ARMATURE ASSEM. | |
| 10. | 9M-7606 | [1] | PLUNGER ASSEM. | |
| 11. | 4M-0188 | [1] | WASHER | |
| 12. | 4M-1828 | [1] | RETAINER | |
| 13. | 9M-7609 | [1] | SPRING | |
| 14. | 4M-1829 | [1] | BOOT | |
| 15. | 4M-1827 | [1] | RETAINER | |
| 16. | 9M-7611 | [2] | RING | |
| 17. | 3F-2617 | [1] | NUT | |
| 18. | 4M-1831 | [1] | PLUG | |
| 7L-2894 | [1] | GASKET | ||
| 19. | 4M-1853 | [1] | LEVER ASSEM. | |
| (Includes) | ||||
| 4M-1830 | [1] | GUIDE | ||
| 20. | 4M-1854 | [1] | SHAFT | |
| 1H-1023 | [1] | SEAL 9.37 mm(.369 in.) diameter | ||
| 2D-6392 | [1] | SEAL 6.07 mm(.239 in.) diameter | ||
| 21. | 4L-2729 | [1] | WASHER | |
| THE FOLLOWING REPAIR KIT IS AVAILABLE: | ||||
| 3N-3763 C | [1] | TERMINAL KIT (insulator) | ||
| C | INDICATES CHANGE | |||
#SEBP10630193
7N-1285: STARTING MOTOR GP-ELECTRIC
7N1285 ELECTRIC STARTING MOTOR GROUP--Delco-Remy--24 Volt--Part 1
Part of 7S4090 Electric Starting Motor Group shown on Page 69B
4M1812 Switch parts are shown on Page 69B
Part of 7S4090 Electric Starting Motor Group shown on Page 69B
4M1812 Switch parts are shown on Page 69B
Parts for your 130G MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7F-4556 | [9] | BOLT | |
| 1L-4789 | [9] | LOCKWASHER | ||
| 2. | 4M-0189 | [2] | SEAL | |
| 3. | 2L-8166 | [1] | WASHER | |
| 4. | 7N-1284 | [1] | FRAME ASSEM. | |
| 5. | 7N-1282 | [1] | BRUSH PLATE | |
| 6F-5829 | [1] | SCREW ASSEM. | ||
| 6. | 4M-1845 | [4] | BRUSH | |
| 7N-1281 | [4] | SPRING | ||
| 2F-2860 | [4] | SCREW | ||
| 7. | 4M-1812 Y | [1] | SWITCH ASSEM. | |
| (Separate Illustration) | ||||
| 8. | 6H-3622 | [4] | SCREW ASSEM. | |
| 9. | 4M-1850 | [1] | HOUSING ASSEM. | |
| (Includes) | ||||
| 2B-4602 | [1] | PLUG | ||
| 9F-2547 | [1] | WICK | ||
| 10. | 1M-9968 | [1] | BUSHING | |
| 11. | 2F-6678 | [1] | SEAL | |
| 12. | 8L-5265 | [1] | HOUSING ASSEM. | |
| 13. | 7N-1280 | [1] | INSULATOR | |
| 14. | 2P-4708 C | [1] | DRIVE ASSEM. (1894213) | |
| (Includes) | ||||
| 15. | 9S-9771 | [1] | PINION | |
| -OR- | ||||
| 16. | 6N-3827 J | [1] | DRIVE ASSEM. (480118) | |
| 17. | 4M-1851 | [1] | GASKET | |
| 18. | 1M-9971 | [1] | SPACER | |
| 19. | 8H-1141 | [4] | SHOE | |
| 20. | 3R-8797 | [8] | SCREW ASSEM. | |
| 21. | 7N-1283 | [1] | COIL ASSEM. | |
| 22. | 1H-2629 | [1] | STRIP | |
| 23. | 4M-1833 | [5] | SCREW 3.81 cm(1.5 in.) long | |
| 7M-0336 | [1] | SCREW 2.18 cm(.86 in.) long | ||
| THE FOLLOWING REPAIR KITS ARE AVAILABLE FOR 2P4708 DRIVE ASSEM: | ||||
| 7N-6098 | [1] | KIT (cup) | ||
| 4S-9459 | [1] | KIT (washer) | ||
| J | NOT PART OF 7N1285 STARTING MO | |||
| Y | SEPARATE ILLUSTRATION | |||
| C | INDICATES CHANGE | |||
#SEBP10630194
7N-1285: STARTING MOTOR GP-ELECTRIC
7N1285 ELECTRIC STARTING MOTOR GROUP--Delco-Remy--24 Volt--Part 2
Part of 7S4090 Electric Starting Motor Group shown on Page 69B
Part of 7S4090 Electric Starting Motor Group shown on Page 69B
Parts for your 130G MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3L-3380 | [1] | BUSHING | |
| 2. | 069-0811 | [1] | STUD | |
| 3. | 3H-3680 | [1] | NUT | |
| 4. | 7N-1279 | [1] | STUD ADAPTER | |
| 5. | 3H-3681 | [1] | NUT | |
| 6. | 9H-3757 | [2] | WASHER (large) | |
| 7F-3494 | [1] | WASHER (small) | ||
| 7. | 9F-4976 | [2] | LOCKWASHER | |
| 8. | 4M-1841 | [1] | CONNECTOR | |
| 9. | 5L-8877 | [1] | ARMATURE ASSEM. | |
| 10. | 9M-7606 | [1] | PLUNGER ASSEM. | |
| 11. | 036-9821 | [1] | WASHER | |
| 12. | 4M-1828 | [1] | RETAINER | |
| 13. | 9M-7609 | [1] | SPRING | |
| 14. | 4M-1829 | [1] | BOOT | |
| 15. | 4M-1827 | [1] | RETAINER | |
| 16. | 9M-7611 | [2] | RING | |
| 17. | 3F-2617 | [1] | NUT | |
| 18. | 4M-1831 | [3] | PLUG | |
| 7L-2894 | [3] | GASKET | ||
| 19. | 069-0797 | [1] | LEVER ASSEM. | |
| 20. | 4M-1854 | [1] | SHAFT | |
| 1H-1023 | [1] | SEAL 9.37mm(.369 in.) diameter | ||
| 2D-6392 | [1] | SEAL 6.07mm(.239 in.) diameter | ||
| 21. | 4L-2729 | [1] | WASHER | |
| 22. | 1P-3879 | [1] | LEAD ASSEM. | |
| THE FOLLOWING REPAIR KIT IS AVAILABLE: | ||||
| 3N-3763 | [1] | TERMINAL KIT---(insulator)---- | ||
#SEBP10630195
3P-0006: STARTING MOTOR GP-ELECTRIC
3P6 ELECTRIC STARTING MOTOR GROUP--24 Volt--Prestolite--Part 1
Part of 7S4090 Electric Starting Motor Group shown on Page 69
9S7976 Switch parts are shown on Page 74
Part of 7S4090 Electric Starting Motor Group shown on Page 69
9S7976 Switch parts are shown on Page 74
Parts for your 130G MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 1D-5117 | [3] | NUT | |
| 2. | 3B-4508 | [6] | LOCKWASHER | |
| 3. | 085-2771 | [1] | CONNECTOR | |
| 4. | 4N-9404 C | [1] | LEAD ASSEM. | |
| 5. | 4N-4694 | [1] | KIT (Field Terminal Stud) | |
| (Includes Stud, Bushing and Washers) | ||||
| 6. | 1D-4719 | [3] | NUT | |
| 7. | 9S-7976 Y | [1] | SOLENOID ASSEM. | |
| (Separate Illustration) | ||||
| 8. | 6H-3622 | [4] | SCREW | |
| 3B-4504 | [4] | LOCKWASHER | ||
| 3K-6116 | [4] | WASHER | ||
| 9. | 4M-3217 | [2] | SCREW | |
| 10. | 4B-1220 | [3] | SCREW | |
| 11. | 8S-6035 | [1] | GASKET | |
| 12. | 3B-4502 | [4] | LOCKWASHER | |
| 13. | 8S-2769 | [1] | FIELD ASSEM. (Commutator End) | |
| 14. | 2B-4602 | [1] | PLUG | |
| 15. | 8S-4682 | [1] | KIT (Bearing and Wick) | |
| 16. | 4N-4693 | KIT (Commutator End Terminal Stud) | ||
| (Includes Stud, Bushing and Washers) | ||||
| 17. | 1D-4717 | [1] | NUT (plain) | |
| 1B-2578 | [1] | NUT (jam) | ||
| 3B-4506 | [2] | LOCKWASHER | ||
| C | INDICATES CHANGE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP10630196
3P-0006: STARTING MOTOR GP-ELECTRIC
3P6 ELECTRIC STARTING MOTOR GROUP--24 Volt--Prestolite--Part 2
Part of 7S4090 Electric Starting Motor Group shown on Page 69
Part of 7S4090 Electric Starting Motor Group shown on Page 69
Parts for your 130G MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 4N-4691 | [1] | PLATE ASSEM. | |
| 2. | 4N-8618 C | [1] | KIT | |
| (Includes 3 Brushes and 1 Clip) | ||||
| 4N-4692 | [1] | KIT | ||
| (Includes 8 Springs) | ||||
| 3. | 2P-8825 C | [1] | SHIFT YOKE ASSEM. | |
| 4. | 2P-8817 | [1] | KIT (Yoke Adjusting) | |
| (Includes Plugs, Pin, Gasket and Nut) | ||||
| 5. | 8S-1535 | [1] | KIT | |
| (Includes 6 Plugs) | ||||
| 6. | 9S-6100 | [1] | ARMATURE ASSEM. | |
| 8S-8071 | [1] | KIT (Armature Thrust Washers) | ||
| 7. | 8S-4684 | [1] | KIT (Bearing and Wick) | |
| 8. | 8S-1543 | [1] | HOUSING ASSEM. (Pinion) | |
| 9. | 2B-4602 | [1] | PLUG | |
| 10. | 8S-2780 | [1] | KIT | |
| (Includes 10 Insulations) | ||||
| 11. | 4N-4517 | [1] | POSITORK DRIVE ASSEM. | |
| 12. | 2H-3931 | [1] | SEAL | |
| 13. | 2P-8824 | [1] | HOUSING ASSEM. | |
| 2B-4602 | [1] | PLUG | ||
| 14. | 8S-2226 | [1] | BUSHING | |
| 15. | 8S-2225 | [1] | SEAL | |
| 16. | 2P-8816 | [1] | KIT (Includes Housing Screws) | |
| 17. | 3B-4504 | [7] | LOCKWASHER | |
| 18. | 4M-0189 | [1] | SEAL | |
| 19. | 4N-4690 | [1] | KIT (Field Coil) | |
| (Includes Coils, Gaskets and Screws) | ||||
| C | INDICATES CHANGE | |||
#SEBP10630197
9G-4337: STARTING MOTOR GP-ELECTRIC
9G4337 ELECTRIC STARTING MOTOR GROUP - Prestolite - 24 Volt - Part 1
Part of 7S4090 Electric Starting Motor Group shown on Page 69C
9S7976 Switch parts are shown on Page 74
Part of 7S4090 Electric Starting Motor Group shown on Page 69C
9S7976 Switch parts are shown on Page 74
Parts for your 130G MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 1D-5117 | [3] | NUT | |
| 2. | 3B-4508 | [6] | LOCKWASHER | |
| 3. | 8S-2771 | [1] | CONNECTOR | |
| 4. | 4N-9404 C | [1] | LEAD ASSEM. | |
| 5. | 4N-4694 | [1] | KIT (Field Terminal Stud) | |
| (Includes Stud, Bushing and Washers) | ||||
| 6. | 1D-4719 | [3] | NUT | |
| 7. | 9S-7976 Y | [1] | SOLENOID ASSEM. | |
| (Separate Illustration) | ||||
| 8. | 6H-3622 | [4] | SCREW | |
| 3B-4504 | [4] | LOCKWASHER | ||
| 3K-6116 | [4] | WASHER | ||
| 9. | 4M-3217 | [2] | SCREW | |
| 10. | 4B-1220 | [3] | SCREW | |
| 11. | 8S-6035 | [1] | GASKET | |
| 12. | 3B-4502 | [4] | LOCKWASHER | |
| 13. | 8S-2769 | [1] | HEAD ASSEM. (Commutator End) | |
| 14. | 2B-4602 | [1] | PLUG | |
| 15. | 8S-4682 | [1] | KIT (Bearing and Wick) | |
| 16. | 4N-4693 | [1] | KIT (Commutator End Terminal Stud) | |
| (Includes Stud, Bushing and Washers) | ||||
| 17. | 1D-4717 | [1] | NUT (plain) | |
| 1B-2578 | [1] | NUT (jam) | ||
| 3B-4506 | [2] | LOCKWASHER | ||
| C | INDICATES CHANGE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP10630198
9G-4337: STARTING MOTOR GP-ELECTRIC
9G4337 ELECTRIC STARTING MOTOR GROUP - Prestolite - 24 Volt - Part 2
Part of 7S4090 Electric Starting Motor Group shown on Page 69C
Part of 7S4090 Electric Starting Motor Group shown on Page 69C
Parts for your 130G MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 4N-4691 | [1] | PLATE ASSEM. | |
| 2. | 4N-8618 | [1] | KIT (Includes 3 Brushes and 1 Clip) | |
| 4N-4692 | [1] | KIT (Includes 8 Springs) | ||
| 3. | 2P-8825 | [1] | SHIFT YOKE ASSEM. | |
| 4. | 2P-8817 | [1] | KIT (Yoke Adjusting) | |
| (Includes Plugs, Pin, Gasket and Nut) | ||||
| 5. | 8S-1535 | [1] | KIT (Includes 6 Plugs) | |
| 6. | 9S-6100 | [1] | ARMATURE ASSEM. | |
| 8S-8071 | [1] | KIT (Armature Thrust Washers) | ||
| 7. | 8S-4684 | [1] | KIT (Bearing and Wick) | |
| 8. | 9G-5854 | [1] | HOUSING ASSEM. (Pinion) | |
| 9. | 9F-2247 | [1] | PLUG | |
| 10. | 8S-2780 | [1] | KIT (Includes 10 Insulations) | |
| 11. | 9G-5587 | [1] | MOTOR DRIVE ASSEM. | |
| 12. | 2H-3931 | [1] | SEAL | |
| 13. | 2P-8824 | [1] | HOUSING ASSEM. | |
| 2B-4602 | [1] | PLUG | ||
| 14. | 8S-2226 | [1] | BUSHING | |
| 15. | 8S-2225 | [1] | SEAL | |
| 16. | 2P-8816 | [1] | KIT (Includes Housing Screws) | |
| 17. | 3B-4504 | [7] | LOCKWASHER | |
| 18. | 4M-0189 | [1] | SEAL | |
| 19. | 4N-4690 | [1] | KIT (Field Coil) | |
| (Includes Coils, Gaskets and Screws) | ||||
| THE FOLLOWING REPAIR KIT IS AVAILABLE. | ||||
| 8S-4684 | [1] | KIT--(pinion housing repair)----- | ||
#SEBP10630199
9S-7976: SOLENOID AS
9S7976 SOLENOID ASSEMBLY--24 Volt
Part of 3P6 Electric Starting Motor Group shown on Page 72
Part of 3P6 Electric Starting Motor Group shown on Page 72
Parts for your 130G MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 9M-7657 C | [4] | NUT-SEALING | |
| 2. | 8S-8023 | [1] | COVER AS | |
| 3. | 8S-8024 | [1] | GASKET-COVER | |
| 4. | 9B-7235 | [1] | SCREW-MACHINE | |
| 9B-7233 | [1] | LOCKWASHER | ||
| 5. | 8S-1528 | [1] | BOOT | |
| 6. | 8S-8021 | [1] | CORE AS | |
| THE FOLLOWING REPAIR | ||||
| KITS ARE AVAILABLE: | ||||
| 8S-1524 | [1] | KIT-TERMINAL STUD (BATTERY) | ||
| 8S-1525 | [1] | KIT-TERMINAL STUD (MOTOR) | ||
| 9S-8688 | [1] | KIT-CONTACT END CORE | ||
| 8S-1527 | [1] | KIT-YOKE END CORE | ||
| C | CHANGE FROM PREVIOUS TYPE | |||
Information:
ELECTRICAL AND STARTING SYSTEM
STARTING MOTOR GP
General Service Information
Engine News
Special Instruction
Installation of New Shift Lever Assembly for All Starter Motors {1453}
Installation of New Shift Lever Assembly for All Starter Motors {1453}
Installation of New Shift Lever Assembly for All Starter Motors {1453}
Procedure to Install the Insulator on to Series Starters on All Engines {1453}
Procedure to Install the Insulator on to Series Starters on All Engines {1453}
Procedure to Install the Insulator on to Series Starters on All Engines {1453}
Installation of Repair Kit-Solenoid Plunger Assembly on All Engines {1453}
Installation of Repair Kit-Solenoid Plunger Assembly on All Engines {1453}
Installation of Repair Kit-Solenoid Plunger Assembly on All Engines {1453}
Procedure to Install Terminal Kit on All Engines {1453}
Procedure to Install Terminal Kit on All Engines {1453}
Procedure to Install Terminal Kit on All Engines {1453}
Procedure to Install Brush Holder Assembly in All Engines {1453}
Procedure to Install Brush Holder Assembly in All Engines {1453}
Procedure to Install Brush Holder Assembly in All Engines {1453}
Procedure to Replace Armature of Starter Motor On All Cat<SUP>®</SUP> Products {1408, 1450, 1453}
Procedure to Replace Armature of Starter Motor On All Cat® Products {1408, 1450, 1453}
Procedure to Replace Armature of Starter Motor On All Cat® Products {1408, 1450, 1453}
Procedure to Replace Commutator End (CE) Housing of Starter Motor On All Cat<SUP>®</SUP> Products {1408, 1450, 1453}
Procedure to Replace Commutator End (CE) Housing of Starter Motor On All Cat® Products {1408, 1450, 1453}
Procedure to Replace Commutator End (CE) Housing of Starter Motor On All Cat® Products {1408, 1450, 1453}
Procedure to Replace Drive Assembly of Starter Motor On All Cat<SUP>®</SUP> Products {1453}
Procedure to Replace Drive Assembly of Starter Motor On All Cat® Products {1453}
Procedure to Replace Drive Assembly of Starter Motor On All Cat® Products {1453}
Specifications
Systems Operation
Testing and Adjusting
Troubleshooting
Engine Does Not Crank with Starting Motor On and Pinion Engaging Ring Gear
37-MT, 41-MT, and 42-MT Series Starting Motors
37-MT, 41-MT, and 42-MT Series Starting Motors
Disassembly and Assembly
Service Magazine
Modification To Prevent Starter From Remaining Engaged With Flywheel After Engine Starts{1400,1450}
1987/03/16
1987/03/16


