AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

8J6380 BLADE LIFT CYLINDER GROUP--(Change 2,3)--82.6 mm (3.25 in.) Bore x 1016 mm (40 in.) Stroke Serial No. 12W1 to 12W568 inclusive Part of 8D7950 Blade Lift Cylinder and Mounting Group shown on Page 150 130G


HYDRAULIC SYSTEM
CYLINDER GP
LINES GP-SIDESHIFT
LINES GP-HYDRAULIC
WORK TOOLS
BLADE GP

MOTOR GRADER 130G MOTOR GRADER 12W
 130G MOTOR GRADER 12W00001-00695 (MACHINE) POWERED BY 3304 ENGINE SEBP1063 130G 12W   (1975)

HYDRAULIC SYSTEM

CYLINDER GP
CYLINDER & MOUNTING GP
8D-7950 CYLINDER & MOUNTING GP
CYLINDER & MOUNTING GP
8D-7950 CYLINDER & MOUNTING GP
BLADE LIFT CYLINDER GROUP
8J-6380 BLADE LIFT CYLINDER GROUP
CYLINDER GP-BLADE LIFT
3G-5223 CYLINDER GP-BLADE LIFT
CYLINDER GP-BLADE SIDE SHIFT
8J-0028 CYLINDER GP-BLADE SIDE SHIFT
TIP MOUNTING AND CYLINDER GROUP
9D-6670 TIP MOUNTING AND CYLINDER GROUP
 

#SEBP10630440
 

8J-6380: BLADE LIFT CYLINDER GROUP

8J6380 BLADE LIFT CYLINDER GROUP--(Change 2,3)--82.6 mm (3.25 in.) Bore x 1016 mm (40 in.) Stroke
Serial No. 12W1 to 12W568 inclusive
Part of 8D7950 Blade Lift Cylinder and Mounting Group shown on Page 150
c200421 SEBP1063
8J6380 BLADE LIFT CYLINDER GROUP Parts scheme
  For full view, you need register

Parts for your 130G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7J-5639 [1] BOLT  
2. 8J-7415 [1] WASHER  
3. 8J-6371 [1] RING  
4. 6J-0793 [1] SEAL ASSEM.  
5. 8J-6370 [1] PISTON  
6. 8J-6381 R [1] CYLINDER ASSEM.  
7. 8J-6384 [2] BEARING  
8. 1H-7339 [1] SEAL  
9. 8J-2574 [1] RING  
10. 8J-6375 [1] HEAD  
11. 6J-6917 [1] SEAL  
12. 5J-8200 [1] SEAL  
13. 8J-5912 [1] SCREW  
14. 1K-6981 [1] SEAL  
15. 8J-6666 [1] ROD ASSEM.  
16. 8J-6377 [1] CROWN  
  R   REMFG PART MAY BE AVAILABLE
 

#SEBP10630441
 

3G-5223: CYLINDER GP-BLADE LIFT

3G5223 BLADE LIFT CYLINDER GROUP--(Change 0)--82.6 mm (3.25 in.) Bore x 1016 mm (40 in.) Stroke
Serial No. 12W569-Up
Part of 8D7950 Blade Lift Cylinder and Mounting Group shown on Page 150A
c224322 SEBP1063
3G5223 CYLINDER GP-BLADE LIFT Parts scheme
  For full view, you need register

Parts for your 130G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7J-5639 [1] BOLT  
2. 8J-7415 [1] WASHER  
3. 8J-6371 [1] RING  
4. 6J-0793 [1] SEAL ASSEM.  
5. 8J-6370 [1] PISTON  
6. 8J-6381 R [1] CYLINDER ASSEM.  
7. 8J-6384 [2] BEARING  
8. 1H-7339 [1] SEAL  
9. 8J-2574 [1] RING  
10. 8J-6375 [1] HEAD  
11. 6J-6917 [1] SEAL  
12. 5J-8200 [1] SEAL  
13. 8J-5912 [1] SCREW  
14. 1K-6981 [1] SEAL  
15. 3G-5485 R [1] ROD ASSEM.  
16. 8J-6377 [1] CROWN  
  R   REMFG PART MAY BE AVAILABLE
 

#SEBP10630442
 

8J-0028: CYLINDER GP-BLADE SIDE SHIFT

8J28 BLADE SIDE SHIFT CYLINDER GROUP--(Change 2)--76.2 mm (3 in.) Bore x 1193.8 mm (47 in.) Stroke
Part of 7D9945 and 9D9830 Blade Side Shift Cylinder and Mounting Groups shown on Pages 148B & 149
c200097 SEBP1063
8J0028 CYLINDER GP-BLADE SIDE SHIFT Parts scheme
  For full view, you need register

Parts for your 130G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7J-5639 [1] BOLT  
2. 6J-5733 [1] RING  
3. 6J-1972 [1] SEAL ASSEM.  
4. 6J-9178 [1] SEAL  
5. 8J-5912 [1] SCREW  
6. 8J-5911 [1] CROWN  
7. 8J-6681 R [1] ROD ASSEM.  
8. 4J-8980 [1] SEAL  
9. 5J-8175 [1] SEAL  
10. 7J-3351 [1] HEAD  
11. 6J-5731 [1] RING  
12. 5H-8848 [1] SEAL  
13. 8J-0027 R [1] CYLINDER ASSEM.  
    (Includes)
14. 6J-0499 [2] LUG  
15. 7J-5682 [1] PISTON  
16. 3K-5234 [1] WASHER  
  R   REMFG PART MAY BE AVAILABLE
 

#SEBP10630443
 

9D-6420: BLADE SHIFT LINES GROUP

9D6420 BLADE SHIFT LINES GROUP
Serial No. 12W1 to 12W374 inclusive
8J5913 Valve and 8J4568 Swivel parts are shown on Pages 142 and 156
c165469 SEBP1063
9D6420 BLADE SHIFT LINES GROUP Parts scheme
  For full view, you need register

Parts for your 130G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9D-5982 [2] HOSE ASSEM. (not serv)  
    For service of each furnish:
  5P-0178 H HOSE 369 cm(145.3 in.)  
  8S-6417 [1] COUPLING ASSEM.  
  4S-5414 [2] SLEEVE  
  1P-9919 [1] COUPLING ASSEM.  
2. 0S-1594 [2] BOLT  
3. 3B-4506 [5] LOCKWASHER  
4. 1D-4717 [2] NUT  
5. 9D-5983 [1] HOSE ASSEM. (not serv)  
    For service furnish:
  5P-0178 H HOSE 136 cm(53.5 in.)  
  4S-5414 [2] SLEEVE  
  8S-6417 [2] COUPLING ASSEM.  
6. 030-8188 [8] CONNECTOR  
7. 3K-0360 [16] SEAL  
8. 7D-9984 [6] ELBOW  
9. 7K-1181 [1] STRAP  
10. 9D-5980 [1] HOSE ASSEM. (not serv)  
    For service furnish:
  5P-0178 H HOSE 148 cm(57.2 in.)  
  8S-6417 C [2] COUPLING ASSEM.  
  4S-5414 C [2] SLEEVE  
11. 9D-5864 [2] HOSE ASSEM. (not serv)  
    For service of each furnish:
  5P-0178 H HOSE 85 cm(33.4 in.)  
  3S-8606 [2] SLEEVE  
  8S-4055 [2] COUPLING ASSEM.  
12. 0L-1143 [3] BOLT  
13. 8J-5913 Y [1] VALVE GROUP  
    (Separate Illustration)
14. 005-4362 [2] ELBOW  
15. 4B-4283 [2] WASHER  
16. 8J-4568 Y [1] SWIVEL GROUP  
    (Separate Illustration)
17. 8D-9092 [1] PIN  
18. 3B-4629 [2] COTTER PIN  
19. 1A-1135 [4] BOLT  
  3B-4510 [4] LOCKWASHER  
20. 8D-8974 [1] GUIDE ASSEM.  
21. 5H-1625 [1] CLAMP  
22. 1S-0994 [2] CLIP  
23. 0S-1585 [1] BOLT  
  1D-4719 [1] NUT  
  3B-4508 [1] LOCKWASHER  
  031-5183 [1] SPACER  
24. 9D-5866 [1] HOSE ASSEM. (not serv)  
    For service furnish:
  5P-0178 H HOSE 184 cm(72.44 in.)  
  8S-6417 [2] COUPLING ASSEM.  
  4S-5414 [2] SLEEVE  
25. 9D-5871 [1] HOSE ASSEM. (not serv)  
    For service furnish:
  5P-0178 H HOSE 141 cm(55.46 in  
  8S-6417 [2] COUPLING ASSEM.  
  4S-5414 [2] SLEEVE  
  C   INDICATES CHANGE
  Y   SEPARATE ILLUSTRATION
  H   ORDER BY THE CENTIMETRE
 

#SEBP10630444
 

2G-3420: LINES GP-HYDRAULIC

2G3420 BLADE SHIFT LINES GROUP
Serial No. 12W375-12W544 incl
8J5913 Valve and 8J4568 Swivel parts are shown on Pages 142 and 156
c159029 SEBP1063
2G3420 LINES GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 130G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9D-5982 [2] HOSE ASSEM. (not serv)  
    For service of each furnish:
  5P-0178 H HOSE 369 cm(145.3 in.)  
  8S-6417 [1] COUPLING ASSEM.  
  4S-5414 [2] SLEEVE  
  1P-9919 [1] COUPLING ASSEM.  
2. 0S-1594 [2] BOLT  
3. 5P-1075 [5] LOCKWASHER  
4. 1D-4717 [2] NUT  
5. 9D-6068 [1] HOSE ASSEM. (not serv)  
    For service furnish:
  5P-0178 H HOSE 127 cm(50 in.)  
  4S-5414 [2] SLEEVE  
  8S-6417 [2] COUPLING ASSEM.  
6. 030-8188 [8] CONNECTOR  
7. 3K-0360 [12] SEAL  
8. 7D-9984 [2] ELBOW  
9. 7K-1181 [1] STRAP  
10. 2G-2558 [1] HOSE ASSEM. (not serv)  
    For service furnish:
  5P-0178 H HOSE 249 cm(98 in.)  
  8S-4055 [2] COUPLING ASSEM.  
  3S-8606 [2] SLEEVE  
11. 9D-5980 [1] HOSE ASSEM. (not serv)  
    For service furnish:
  5P-0178 H HOSE 148 cm(58.20 in.)  
  4S-5414 [2] SLEEVE  
  8S-6417 [2] COUPLING ASSEM.  
12. 0L-1143 [3] BOLT  
13. 8J-5913 Y [1] VALVE GROUP  
    (Separate Illustration)
14. 005-4362 [2] ELBOW  
15. 4B-4283 [2] WASHER  
16. 8J-4568 Y [1] SWIVEL GROUP  
    (Separate Illustration)
17. 8D-9092 [1] PIN  
18. 3B-4628 [2] COTTER PIN  
19. 1A-1135 [4] BOLT  
  3B-4510 [4] LOCKWASHER  
20. 8D-8974 [1] GUIDE ASSEM.  
21. 5H-1625 [1] CLAMP  
22. 1S-0994 [2] CLIP  
23. 0S-1585 [1] BOLT  
  1D-4719 [1] NUT  
  3B-4508 [1] LOCKWASHER  
  031-5183 [1] SPACER  
24. 2G-2561 [1] HOSE ASSEM. (not serv)  
    For service furnish:
  5P-0178 H HOSE 279 cm(109.9 in.)  
  8S-6417 [2] COUPLING ASSEM.  
  4S-5414 [2] SLEEVE  
  H   ORDER BY THE CENTIMETRE
  Y   SEPARATE ILLUSTRATION
 

#SEBP10630445
 

2G-3420: LINES GP-HYDRAULIC

2G3420 BLADE SHIFT LINES GROUP
Serial No. 12W545 - Up
3G5832 Valve & 8J4568 Swivel parts are shown on page 142-1 & on page 156
c174729 SEBP1063
2G3420 LINES GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 130G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9D-5982 [2] HOSE ASSEM. (not serv)  
    For service of each furnish:
  2P-5943 CH HOSE 145.3 in.(369 cm)  
  8S-6417 [1] COUPLING ASSEM.  
  4S-5414 [2] SLEEVE  
  1P-9919 [1] COUPLING ASSEM.  
2. 0S-1594 [2] BOLT  
3. 5P-1075 C [5] WASHER (conical)  
4. 1D-4717 [2] NUT  
5. 9D-6068 [1] HOSE ASSEM. (not serv)  
    For service furnish:
  2P-5943 CH HOSE 50 in.(127 cm)  
  4S-5414 [2] SLEEVE  
  8S-6417 [2] COUPLING ASSEM.  
6. 030-8188 [8] CONNECTOR  
7. 3K-0360 [12] SEAL  
8. 7D-9984 [2] ELBOW  
9. 7K-1181 [1] STRAP  
10. 2G-2558 [1] HOSE ASSEM. (not serv)  
    For service furnish:
  2P-5943 CH HOSE 98 in.(249 cm)  
  8S-4055 [2] COUPLING ASSEM.  
  3S-8606 [2] SLEEVE  
11. 9D-5980 [1] HOSE ASSEM. (not serv)  
    For service furnish:
  2P-5943 CH HOSE 58.2 in.(148 cm)  
  4S-5414 [2] SLEEVE  
  8S-6417 [2] COUPLING ASSEM.  
12. 0L-1143 C [1] BOLT 6.35 cm(2.5 in.)long  
13. 3G-5832 CY [1] VALVE GROUP  
    (Separate Illustration)
14. 005-4362 [2] ELBOW  
15. 4B-4283 [2] WASHER  
16. 8J-4568 Y [1] SWIVEL GROUP  
    (Separate Illustration)
17. 8D-9092 [1] PIN  
18. 3B-4628 [2] COTTER PIN  
19. 1A-1135 [4] BOLT  
  3B-4510 [4] LOCKWASHER  
20. 8D-8974 [1] GUIDE ASSEM.  
21. 5H-1625 [1] CLAMP  
22. 1S-0994 [2] CLIP  
23. 0S-1585 [1] BOLT  
  1D-4719 [1] NUT  
  3B-4508 [1] LOCKWASHER  
  031-5183 [1] SPACER  
24. 2G-2561 [1] HOSE ASSEM. (not serv)  
    For service furnish:
  2P-5943 CH HOSE 109.9 in.(279 cm)  
  8S-6417 [2] COUPLING ASSEM.  
  4S-5414 [2] SLEEVE  
25. 0T-0573 C [2] BOLT 6.99 cm(2.75 in.)long  
  7K-4743 C [2] WASHER  
  C   INDICATES CHANGE
  H   ORDER BY THE INCH
  Y   SEPARATE ILLUSTRATION
 

#SEBP10630446
 

8D-5285: LIFT GP-BLADE

8D5285 BLADE LIFT GROUP--Part 1 of 2
S/N 12W1 - 12W470 INCL.
c209638 SEBP1063
8D5285 LIFT GP-BLADE Parts scheme
  For full view, you need register

Parts for your 130G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9D-2753 [2] LOCK  
2. 7F-5227 [6] BOLT  
  3B-4512 [6] LOCKWASHER  
3. 8D-8169 [1] ARM ASSEM.  
    (Includes)
4. 8D-8168 [1] BEARING  
5. 7D-8889 [1] BEARING  
6. 9D-6583 [8] SEAL  
7. 8D-1784 [2] PIN  
8. 9D-6584 [1] SEAL  
9. 8D-9849 [1] BAR ASSEM.  
    (Includes)
10. 8D-6629 [4] BEARING  
11. 6D-4671 [1] BALLSTUD  
12. 9D-3311 [2] BEARING  
  9D-3526 [1] SPACER  
13. 9D-3648 [1] RING  
14. 8D-4698 [2] LOCK  
15. 1A-8651 [4] BOLT  
  3B-4510 [4] LOCKWASHER  
16. 8D-8173 [1] ARM ASSEM.  
    (Includes)
17. 8D-8168 [1] BEARING  
18. 7D-8889 [1] BEARING  
 

#SEBP10630447
 

8D-5285: LIFT GP-BLADE

8D5285 BLADE LIFT GROUP--Part 2 of 2
S/N 12W1 - 12W470 INCL.
c209639 SEBP1063
8D5285 LIFT GP-BLADE Parts scheme
  For full view, you need register

Parts for your 130G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7D-8891 [2] RETAINER  
2. 7D-8884 [2] SEAL (plastic)  
  7H-2444 [2] SEAL (rubber)  
3. 7D-8876 [2] WASHER 2.388 mm(.094 in.) thick  
  7D-8875 [4] WASHER 1.905 mm(.075 in.) thick  
4. 7D-8879 [8] SHIM .127 mm(.005 in.) thick  
  7D-8881 [6] SHIM .254 mm(.010 in.) thick  
  7D-8882 [2] SHIM .508 mm(.020 in.) thick  
5. 7D-8877 [2] WASHER 2.388 mm(.094 in.) thick  
  7D-8878 [4] WASHER 1.905 mm(.075 in.) thick  
6. 7D-8883 [2] SEAL (plastic)  
  5F-0149 [2] SEAL (rubber)  
7. 8D-8186 [2] YOKE ASSEM.  
    (Includes)
8. 7D-8892 [1] RING  
9. 7D-8874 [8] WASHER 1.905 mm(.075 in.) thick  
  7D-8873 [4] WASHER 2.388 mm(.094 in.) thick  
10. 8D-5214 [4] WASHER 2.388 mm(.094 in.) thick  
  8D-5217 [10] WASHER 1.219 mm(.048 in.) thick  
  8D-5216 [10] WASHER .762 mm(.030 in.) thick  
11. 8D-4689 [2] PIN  
12. 2G-3984 C [2] PLATE  
13. 9S-1366 [2] BOLT  
  2M-0849 [2] WASHER  
14. 0S-1587 [4] BOLT  
  3B-4508 [4] LOCKWASHER  
  C   INDICATES CHANGE
 

#SEBP10630448
 

8D-5285: LIFT GP-BLADE

8D5285 BLADE LIFT GROUP-Part 1 of 2
Serial No. 12W471-Up
c227771 SEBP1063
8D5285 LIFT GP-BLADE Parts scheme
  For full view, you need register

Parts for your 130G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2G-7917 C [2] LOCK ASSEM.  
2. 7F-5227 C [4] BOLT  
  3B-4512 C [4] LOCKWASHER  
3. 8D-8169 [1] ARM ASSEM.  
    (Includes)
4. 8D-8168 [1] BEARING  
5. 7D-8889 [1] BEARING  
6. 9D-6583 [8] SEAL  
7. 8D-1784 [2] PIN  
8. 9D-6584 [1] SEAL  
9. 8D-9849 [1] BAR ASSEM.  
    (Includes)
10. 8D-6629 [4] BEARING  
11. 6D-4671 [1] BALLSTUD  
12. 9D-3311 [2] BEARING  
  9D-3526 [1] SPACER  
13. 9D-3648 [1] RING  
14. 2G-7918 C [2] LOCK ASSEM.  
15. 1A-8651 [4] BOLT  
  3B-4510 [4] LOCKWASHER  
16. 8D-8173 [1] ARM ASSEM.  
    (Includes)
17. 8D-8168 [1] BEARING  
18. 7D-8889 [1] BEARING  
  C   INDICATES CHANGE
 

#SEBP10630449
 

8D-5285: LIFT GP-BLADE

8D5285 BLADE LIFT GROUP-Part 2 of 2
Serial No. 12W471-Up
c227772 SEBP1063
8D5285 LIFT GP-BLADE Parts scheme
  For full view, you need register

Parts for your 130G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7D-8891 [2] RETAINER  
2. 7D-8884 [2] SEAL (plastic)  
  7H-2444 [2] SEAL (rubber)  
3. 7D-8876 [2] WASHER 2.388 mm(.094 in.) thick  
  7D-8875 [4] WASHER 1.905 mm(.075 in.) thick  
4. 7D-8879 [8] SHIM .127 mm(.005 in.) thick  
  7D-8881 [6] SHIM .254 mm(.010 in.) thick  
  7D-8882 [2] SHIM .508 mm(.020 in.) thick  
5. 7D-8877 [2] WASHER 2.388 mm(.094 in.) thick  
  7D-8878 [4] WASHER 1.905 mm(.075 in.) thick  
6. 7D-8883 [2] SEAL (plastic)  
  5F-0149 [2] SEAL (rubber)  
7. 2G-8238 C [2] YOKE ASSEM.  
    (Each Includes)
8. 2G-8233 [1] RING  
9. 7D-8874 [8] WASHER 1.905 mm(.075 in.) thick  
  7D-8873 [4] WASHER 2.388 mm(.094 in.) thick  
10. 8D-5214 [4] WASHER 2.388 mm(.094 in.) thick  
  8D-5217 [10] WASHER 1.219 mm(.048 in.) thick  
  8D-5216 [10] WASHER .762 mm(.030 in.) thick  
11. 8D-4689 [2] PIN  
12. 2G-3984 [2] PLATE  
13. 9S-1366 [2] BOLT  
  2M-0849 [2] WASHER  
14. 0S-1587 [4] BOLT  
14. 3B-4508 [4] LOCKWASHER  
  C   INDICATES CHANGE
 

Information:

Special Instruction
Dimensions Of Articulated Joints And Steering Cylinder Bores For Motor Graders{7051, 7065, 7066}
Dimensions Of Articulated Joints And Steering Cylinder Bores For Motor Graders{7051, 7065, 7066}
Installation Of Improved Steering Cylinders, Sockets And Crossover Relief Valves On Motor Graders{4303}
Installation Of Improved Steering Cylinders, Sockets And Crossover Relief Valves On Motor Graders{4303}
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Technical Information Bulletin
Surface Finishes of Cylinder Bores{7562}
Surface Finishes of Cylinder Bores{7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Specifications
Cylinders
12G, 130G, 140G MOTOR GRADERS HYDRAULIC SYSTEM AND STEERING
Mounting For Articulation Cylinder
12G, 130G, 140G MOTOR GRADERS HYDRAULIC SYSTEM AND STEERING
Cylinder Groups
12G, 120G, 130G & 140G MOTOR GRADERS HYDRAULIC SYSTEM & STEE
Cylinder Mounting
12G, 120G, 130G & 140G MOTOR GRADERS HYDRAULIC SYSTEM & STEE
Tool Operating Manual
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Reuse And Salvage Guidelines
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
Contamination Control Guidelines
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Applied Failure Analysis
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Bench Test Procedures
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Disassembly and Assembly
Steering Cylinders
12G, 120G, 130G & 140G MOTOR GRADER VEHICLE SYSTEMS
Wheel Lean Cylinder
12G, 120G, 130G & 140G MOTOR GRADER VEHICLE SYSTEMS
Blade Lift Cylinders
12G, 120G, 130G & 140G MOTOR GRADER VEHICLE SYSTEMS
Ball And Socket Joint Inserts
12G, 120G, 130G & 140G MOTOR GRADER VEHICLE SYSTEMS
Blade Sideshift Cylinder
12G, 120G, 130G & 140G MOTOR GRADER VEHICLE SYSTEMS
Blade Centershift Cylinder
12G, 120G, 130G & 140G MOTOR GRADER VEHICLE SYSTEMS
Blade Tip Cylinder
12G, 120G, 130G & 140G MOTOR GRADER VEHICLE SYSTEMS
Articulation Cylinders
12G, 120G, 130G & 140G MOTOR GRADER VEHICLE SYSTEMS
Hydraulic Cylinders
12G, 120G, 130G & 140G MOTOR GRADER VEHICLE SYSTEMS
Steering Cylinders
12G,130G & 140G MOTOR GRADERS VEHICLE SYSTEMS
Wheel Lean Cylinder
12G,130G & 140G MOTOR GRADERS VEHICLE SYSTEMS
Blade Lift Cylinders
12G,130G & 140G MOTOR GRADERS VEHICLE SYSTEMS
Ball And Socket Joint Inserts
12G,130G & 140G MOTOR GRADERS VEHICLE SYSTEMS
Blade Sideshift Cylinder
12G,130G & 140G MOTOR GRADERS VEHICLE SYSTEMS
Blade Tip Cylinder
12G,130G & 140G MOTOR GRADERS VEHICLE SYSTEMS
Articulation Cylinders
12G,130G & 140G MOTOR GRADERS VEHICLE SYSTEMS
Hydraulic Cylinders
12G,130G & 140G MOTOR GRADERS VEHICLE SYSTEMS
Service Magazine
Valve Assembly Used In Centershift Lock Control Group To Prevent Accidental Rotation And Lowering Of Blade{5220,5221,5223,6151}
1980/10/20
Valve Assembly And Nipple Moved From Centershift Lock Control Group To Brake Control Group To Prevent Unauthorized Operation{4282,4267,5220,5221,5223,6151}
1980/11/10
Correct Position Of Shims In Blade Lift And Centershift Cylinder Groups{5102,5223}
1982/04/12
New Pin For Moldboard Shift Cylinder Prevents Loss During Operation{5229}
1984/06/04
Centershift Extension Groups: A Better Method To Cut A Bank Slope At A 2:1 Ratio{5229,6151}
1977/04/11
Washers Added To Articulation Cylinders Minimize Damage To Cylinder Crowns{7058,4303}
1987/05/25
New Back-up Rings For Hydraulic Cylinders{5200,5100}
1988/03/28
New Hydraulic Cylinder Washers Keep Piston Retaining Bolts Tighter{5200,5213,5223,5229,6150}
1988/05/16
New Articulation And Scarifier Cylinders Have Larger Piston Retaining Bolts{5213,7058}
1988/10/24
New Blade Lift And Centershift Cylinders Have Caps With Shims For Adjustment{5102,5223}
1979/03/12
Adjustment Procedure For Blade Lift Cylinders And Centershift Cylinders{5223,5102}
1979/03/26
Steering System Improvements Prevent Possible Damage To Steering Cylinder Sockets{4303,4304,4305,4322}
1979/08/27
Adjustable Wear Strip Kit Available For Blade Cylinder Tip Bracket {5254,5230}
1989/05/08
Improved Performance For The Thirteenth Valve{5106,5140,5212}
1992/05/25
Lock Valve Group With A Relief For Right Blade Lift Cylinder Is Available On Motor Graders{5102,5100}
1994/02/07
Correction to Specifications, SENR3488 {5265}
2000/02/21
New Assembly Instructions for Rod Seals on Hydraulic Cylinders are Available {7562}
2001/07/30
Correctly Assembling the Buffer Seal Will Prevent Failure of the U-Cup Seals {7562}
2001/07/30
Double Lip Wiper Seals Must Be Installed Properly {7562}
2002/12/09
Procedure Now Available to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
2013/02/28
Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
A Rework Procedure Improves the Seal Assembly Performance in Hydraulic Cylinders on Cat Products {7562}
2010/04/30
New U-Cup Seal are Available with a Narrow Width to Service Cylinders in the Field {4303, 5101, 5102, 5104, 5456, 5457, 5458, 7562}
2010/12/24
Cat<SUP>&reg;</SUP> Reman Announces Remanufactured Cylinders For Motor Grader Applications {4303, 5102, 5106, 5211, 5213, 5223, 5229, 5265}
2015/07/21

Caterpillar Parts SIS Catalog 130G :

CYLINDER & MOUNTING GP
8D-7950 CYLINDER & MOUNTING GP
CYLINDER & MOUNTING GP
8D-7950 CYLINDER & MOUNTING GP
VALVE GP-RELIEF & CHECK
8J-5798 VALVE GP-RELIEF & CHECK
CHECK & RELIEF VALVE GP
8J-9975 CHECK & RELIEF VALVE GP
CYLINDER & MOUNTING GP
9D-9830 CYLINDER & MOUNTING GP
BLADE SIDE SHIFT CYLINDER AND MOUNTING GROUP
7D-9945 BLADE SIDE SHIFT CYLINDER AND MOUNTING GROUP
LINES GP-LIFT CYLINDER
8D-2820 LINES GP-LIFT CYLINDER
LINES GP-LIFT CYLINDER
8D-2820 LINES GP-LIFT CYLINDER
CYLINDER GP-BLADE LIFT
3G-5223 CYLINDER GP-BLADE LIFT
CYLINDER GP-BLADE SIDE SHIFT
8J-0028 CYLINDER GP-BLADE SIDE SHIFT
BLADE SHIFT LINES GROUP
9D-6420 BLADE SHIFT LINES GROUP
LINES GP-HYDRAULIC
2G-3420 LINES GP-HYDRAULIC
LINES GP-HYDRAULIC
2G-3420 LINES GP-HYDRAULIC
LIFT GP-BLADE
8D-5285 LIFT GP-BLADE
LIFT GP-BLADE
8D-5285 LIFT GP-BLADE
LIFT GP-BLADE
8D-5285 LIFT GP-BLADE

Truck sale:

Caterpillar 130G
 
Caterpillar 130G
- motor graders
PETERSON CAT
 
28.500 
Caterpillar 130G, bergbau-motorgrader, Bau-Und Bergbauausrüstung


Caterpillar 130G, Construction
34,000 
Caterpillar 130G, Construction
- motor graders
PETERSON CAT
 
55,000 
Caterpillar HM 329130G, Construction
- hammer
WHEELER MACHINERY CO.
Caterpillar 130G, Construction
37,883 
Caterpillar 130G, Construction
- motor graders
EMPIRE MACHINERY
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.