AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

2G3430 HYDRAULIC BLADE TIP LINES GROUP - 1 Circuit Serial No. 12W545 - Up 3G5832 Check and Relief Valve parts are shown on Page 142-1 130G


HYDRAULIC SYSTEM
LINES GP-HYDRAULIC
SWIVEL GP
CYLINDER GP
OPERATOR STATION
CONTROL GP-STEERING

MOTOR GRADER 130G MOTOR GRADER 12W
 130G MOTOR GRADER 12W00001-00695 (MACHINE) POWERED BY 3304 ENGINE SEBP1063 130G 12W   (1975)

HYDRAULIC SYSTEM

LINES GP-HYDRAULIC
HYDRAULIC BLADE TIP LINES GROUP
2G-1610 HYDRAULIC BLADE TIP LINES GROUP
LINES GP-HYDRAULIC
2G-3430 LINES GP-HYDRAULIC
LINES GP-HYDRAULIC
2G-3430 LINES GP-HYDRAULIC
LINES GP-HYDRAULIC
8D-8590 LINES GP-HYDRAULIC
LINES GP-HYDRAULIC
8D-8600 LINES GP-HYDRAULIC
LINES GP-HYDRAULIC 1
2G-4060 LINES GP-HYDRAULIC 1
 

#SEBP10630460
 

2G-3430: LINES GP-HYDRAULIC

2G3430 HYDRAULIC BLADE TIP LINES GROUP - 1 Circuit
Serial No. 12W545 - Up
3G5832 Check and Relief Valve parts are shown on Page 142-1
c227773 SEBP1063
2G3430 LINES GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 130G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 005-4362 [6] ELBOW  
2. 3K-0360 [12] SEAL  
3. 9D-5977 [2] HOSE ASSEM. (not serv)  
    For service of each furnish:
  2P-5943 H HOSE 210.63 in. (535 cm)  
  8S-6417 [1] COUPLING ASSEM. (straight)  
  8S-6392 [1] COUPLING ASSEM. (90 degrees)  
  4S-5414 [2] SLEEVE  
4. 0L-1143 [1] BOLT  
5. 3G-5832 Y [1] VALVE GROUP  
    (Separate Illustration)
6. 030-8188 [3] CONNECTOR  
7. 2G-2558 [1] HOSE ASSEM. (not serv)  
    For service furnish:
  2P-5943 H HOSE 98.04 in. (249 cm)  
  8S-6417 [2] STEM ASSEM.  
  4S-5414 [2] SLEEVE  
8. 2G-3791 [1] HOSE ASSEM. (not serv)  
    For service furnish:
  2P-5943 H HOSE 95.7 in. (243 cm)  
  8S-6417 [2] STEM ASSEM.  
  4S-5414 [2] SLEEVE  
9. 7D-9984 [3] ELBOW  
10. 9D-5970 [1] HOSE ASSEM. (not serv)  
    For service furnish:
  2P-5943 H HOSE 30.32 in. (77 cm)  
  4S-5414 [2] SLEEVE  
  8S-6417 [1] STEM ASSEM. (straight)  
  8S-6392 [1] STEM ASSEM. (90 degrees)  
11. 9D-6048 [1] HOSE ASSEM. (not serv)  
    For service furnish:
  2P-5943 H HOSE 38.20 in. (97 cm)  
  4S-5414 [2] SLEEVE  
  8S-6417 [2] COUPLING ASSEM.  
12. 5P-1075 [3] WASHER .157 in.(4 mm)thick  
13. 0T-0573 [2] BOLT (2.75 in. long)  
  7K-4743 [2] WASHER .250 in.(6.35 mm)thick  
  H   ORDER BY THE INCH
  Y   SEPARATE ILLUSTRATION
 

#SEBP10630461
 

8J-0384: SWIVEL GP

8J384 SWIVEL GROUP
Part of 8D8640 Hydraulic Power Blade Lines Group shown on Page 158
AN ATTACHMENT
c119661 SEBP1063
8J0384 SWIVEL GP Parts scheme
  For full view, you need register

Parts for your 130G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5J-1246 [6] SHIM  
2. 4K-1493 [2] SCREW  
3. 8J-0380 [1] RETAINER  
4. 8J-0385 [1] BODY  
5. 8J-2331 [7] SEAL  
6. 2H-3928 [7] SEAL  
7. 8J-0386 [1] ROTOR  
8. 0S-1585 [4] BOLT  
  3B-4508 [4] LOCKWASHER  
9. 3H-0107 [4] SEAL  
10. 8J-0377 [1] COVER  
11. 4J-9964 [2] SEAL  
12. 8J-2330 [2] SEAL  
 

#SEBP10630462
 

8D-3310: CYLINDER & MOUNTING GP

8D3310 STEERING CYLINDER AND MOUNTING GROUP
S/N 12W1 - 12W591 INCL.
8J5538 and 8J8820 Cylinder parts are shown on Pages 161 and 162
c202455 SEBP1063
8D3310 CYLINDER & MOUNTING GP Parts scheme
  For full view, you need register

Parts for your 130G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0L-1351 C [2] BOLT  
  3B-4506 [2] LOCKWASHER  
2. 8J-5538 [1] CYLINDER GROUP (R.H.)  
  8J-8820 Y [1] CYLINDER GROUP (L.H.)  
    (Separate Illustration)
3. 3B-4618 C [2] PIN  
4. 8D-2811 [2] WASHER  
5. 7D-8913 [2] SOCKET  
    (Each Includes)
6. 2F-8057 [1] NUT  
7. 2H-3786 [2] NUT  
8. 8D-2429 [2] PIN ASSEM.  
9. 8D-2638 [4] SPACER  
  C   INDICATES CHANGE
  Y   SEPARATE ILLUSTRATION
 

#SEBP10630463
 

8D-3310: CYLINDER & MOUNTING GP

8D3310 MOUNTING AND STEERING CYLINDER GROUP
Serial No. 12W592 - Up
3G8069 & 3G8070 Cylinder parts are shown Pages 160B and 160C
c223866 SEBP1063
8D3310 CYLINDER & MOUNTING GP Parts scheme
  For full view, you need register

Parts for your 130G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0L-1351 [2] BOLT  
  3B-4506 [2] LOCKWASHER  
2. 3G-8069 C [1] CYLINDER GROUP (R. H.)  
  3G-8070 CY [1] CYLINDER GROUP (L. H.)  
    (Separate Illustration)
3. 3B-4618 [2] PIN  
4. 8D-2811 [2] WASHER  
5. 6G-1780 C [2] SOCKET GROUP  
    (Each Includes)
6. 2F-8057 [1] NUT  
7. 2H-3786 [2] NUT  
8. 8D-2429 [2] PIN ASSEM.  
9. 8D-2638 [4] SPACER  
  C   INDICATES CHANGE
  Y   SEPARATE ILLUSTRATION
 

#SEBP10630464
 

3G-8069: CYLINDER GP-STEER

3G8069 STEERING CYLINDER GROUP-(Chg.0-3) R.H. 64mm(2.5") Bore x 267mm(10.5") Stroke
Serial No. 12W592 - Up
Part of 8D3310 Steering Cylinder & Mounting Group shown on Page 160
c223867 SEBP1063
3G8069 CYLINDER GP-STEER Parts scheme
  For full view, you need register

Parts for your 130G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7J-5639 [1] BOLT  
2. 8J-7415 [1] WASHER  
3. 8J-6212 [1] RING  
4. 8J-6213 [1] SEAL ASSEM.  
5. 3G-8076 [1] PISTON  
6. 3G-8427 R [1] ROD ASSEM.  
7. 8J-6221 [1] HEAD  
8. 8F-6711 [1] SEAL  
  030-3239 [1] RING  
9. 6J-9733 [1] SEAL  
10. 5J-8150 [1] SEAL  
11. 4J-8979 [1] SEAL  
12. 8J-6220 [1] SCREW  
13. 8J-6222 [1] CROWN  
14. 3G-8071 R [1] CYLINDER ASSEM.  
    (Includes)
15. 8J-6215 [2] RING  
16. 005-8639 [1] BEARING  
  R   REMFG PART MAY BE AVAILABLE
 

#SEBP10630465
 

3G-8070: CYLINDER GP-STEER

3G8070 STEERING CYLINDER GROUP-(Chg.0-2) L.H. 64mm (2.5")Bore x 267mm(10.5") Stroke
Serial No. 12W592 - Up
Part of 8D3310 Steering Cylinder & Mounting Group shown on Page 160
c223868 SEBP1063
3G8070 CYLINDER GP-STEER Parts scheme
  For full view, you need register

Parts for your 130G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7J-5639 [1] BOLT  
2. 8J-7415 [1] WASHER  
3. 8J-6212 [1] RING  
4. 8J-6213 [1] SEAL ASSEM.  
5. 3G-8076 [1] PISTON  
6. 3G-8427 R [1] ROD ASSEM.  
7. 8J-6221 [1] HEAD  
8. 8F-6711 [1] SEAL  
  030-3239 [1] SEAL  
9. 6J-9733 [1] SEAL  
10. 5J-8150 [1] SEAL  
11. 4J-8979 [1] SEAL  
12. 8J-6220 [1] SETSCREW  
13. 8J-6222 [1] CROWN  
14. 3G-8072 R [1] CYLINDER ASSEM.  
    (Includes)
15. 8J-6215 [2] RING  
16. 005-8639 [1] BEARING  
  R   REMFG PART MAY BE AVAILABLE
 

#SEBP10630466
 

8J-5538: STEERING CYLINDER GROUP

8J5538 STEERING CYLINDER GROUP (Changes 2-4)--R.H.--2.50" Bore x 9.90" Stroke
Part of 8D3310 Steering Cylinder and Mounting Group
c207405 SEBP1063
8J5538 STEERING CYLINDER GROUP Parts scheme
  For full view, you need register

Parts for your 130G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7J-5639 [1] BOLT  
2. 8J-7415 [1] WASHER  
3. 8J-6212 [1] RING  
4. 8J-6213 [1] SEAL ASSEM.  
5. 8J-6211 [1] PISTON  
6. 8J-6216 [1] ROD ASSEM.  
7. 8J-6221 [1] HEAD  
8. 8F-6711 [1] SEAL  
  030-3239 [1] RING  
9. 6J-9733 [1] SEAL  
10. 5J-8150 [1] SEAL  
11. 4J-8979 [1] SEAL  
12. 8J-6220 [1] SCREW  
13. 8J-6222 [1] CROWN  
14. 8J-6218 [1] CYLINDER ASSEM.  
15. 8J-6215 [2] RING  
16. 005-8639 C [1] BEARING  
  C   INDICATES CHANGE
 

#SEBP10630467
 

8J-8820: STEERING CYLINDER GROUP

8J8820 STEERING CYLINDER GROUP (Changes 1-3)--L.H.--2.50" Bore x 9.90" Stroke
Part of 8D3310 Steering Cylinder and Mounting Group shown on Page 160
c207407 SEBP1063
8J8820 STEERING CYLINDER GROUP Parts scheme
  For full view, you need register

Parts for your 130G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7J-5639 [1] BOLT  
2. 8J-7415 [1] WASHER  
3. 8J-6212 [1] RING  
4. 8J-6213 [1] SEAL ASSEM.  
5. 8J-6211 [1] PISTON  
6. 8J-6216 [1] ROD ASSEM.  
7. 8J-6221 [1] HEAD  
8. 8F-6711 [1] SEAL  
  030-3239 [1] RING  
9. 6J-9733 [1] SEAL  
10. 5J-8150 [1] SEAL  
11. 4J-8979 [1] SEAL  
12. 8J-6220 [1] SETSCREW  
13. 8J-6222 [1] CROWN  
14. 8J-8821 [1] CYLINDER ASSEM.  
15. 8J-6215 [2] RING  
16. 005-8639 C [1] BEARING  
  C   INDICATES CHANGE
 

#SEBP10630468
 

8D-7530: STEERING CONTROL GROUP

8D7530 STEERING CONTROL GROUP
Serial No. 12W1 to 12W374 inclusive
9J7025 Pump parts are shown on Page 166
c154380 SEBP1063
8D7530 STEERING CONTROL GROUP Parts scheme
  For full view, you need register

Parts for your 130G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9M-7362 [1] COVER  
2. 8D-8648 [1] WHEEL  
3. 2R-0620 [3] SCREW  
4. 7D-9719 [1] GASKET  
5. 6S-3065 [1] NUT  
6. 3B-1915 [4] BOLT  
  3K-8909 [4] LOCKWASHER  
7. 9J-7025 Y [1] PUMP GROUP  
    (Separate Illustration)
  Y   SEPARATE ILLUSTRATION
 

#SEBP10630469
 

8D-7530: STEERING CONTROL GROUP

8D7530 STEERING CONTROL GROUP
Serial No. 12W375 to 12W501 inclusive
9J7025 Pump parts are shown on Page 166
c159932 SEBP1063
8D7530 STEERING CONTROL GROUP Parts scheme
  For full view, you need register

Parts for your 130G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9M-7362 [1] COVER  
2. 8D-8648 [1] WHEEL  
3. 2R-0620 [3] SCREW  
4. 7D-9719 [1] GASKET  
5. 6S-3065 [1] NUT  
6. 5P-0076 C [4] BOLT  
7. 9J-7025 Y [1] PUMP GROUP  
    (Separate Illustration)
8. 2G-3163 C [1] PLATE  
  C   INDICATES CHANGE
  Y   SEPARATE ILLUSTRATION
 

Information:

Special Instruction
Hose and Coupling Assembly and Repair Process Guide{0684, 3016, 3103, 3154, 4133, 4257, 4304, 5057, 7554}
Hose and Coupling Assembly and Repair Process Guide{0684, 3016, 3103, 3154, 4133, 4257, 4304, 5057, 7554}
New Hose Couplings Are Now Used{0684, 5057, 5057, 7554}
New Hose Couplings Are Now Used{0684, 5057, 5057, 7554}
O-Rings - Radial, Fitting Assembly O-Rings and Other O-Ring Applications {0599, 0738, 4000, 4250, 4300, 5050, 5057, 7555}
O-Rings - Radial, Fitting Assembly O-Rings and Other O-Ring Applications {0599, 0738, 4000, 4250, 4300, 5050, 5057, 7555}
Technical Information Bulletin
Some Hydraulic Couplings are Identified with an Incorrect Part Number{5057}
Some Hydraulic Couplings are Identified with an Incorrect Part Number{5057}
The Flange Head on <NOBR>442-5593</NOBR> Coupling As May Have Been Manufactured Incorrectly {5057}
The Flange Head on 442-5593 Coupling As May Have Been Manufactured Incorrectly {5057}
Tool Operating Manual
358-4528 (380/480 V, 50/60 Hz, 3 Phase), 457-6040 (230V, 60 Hz, Single Phase) , 457-6039 (230V, 50 Hz, Single Phase) Hose Machine Group Set-Up and Operation{0599, 0684}
358-4528 (380/480 V, 50/60 Hz, 3 Phase), 457-6040 (230V, 60 Hz, Single Phase) , 457-6039 (230V, 50 Hz, Single Phase) Hose Machine Group Set-Up and Operation{0599, 0684}
Crimputer III Setup and Operation{0684, 5057}
Crimputer III Setup and Operation{0684, 5057}
242-3567 Variable Crimp Die Bowl{0684}
242-3567 Variable Crimp Die Bowl{0684}
Crimping Caterpillar 1E294, 1E716, 1E844 Hose and Couplings {0374, 0599, 0684, 0738, 5057}
Crimping Caterpillar 1E294, 1E716, 1E844 Hose and Couplings {0374, 0599, 0684, 0738, 5057}
Using the 209-3153 Portable Hose Machine {0374, 0599, 0684, 0738, 5057}
Using the 209-3153 Portable Hose Machine {0374, 0599, 0684, 0738, 5057}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
Converting 137-7238 Hose Assembly Machines and 134-5640 Hose Assembly Machines (100 Ton) from Sony Control to Crimputer Control{0374, 0599, 0684, 5057}
Converting 137-7238 Hose Assembly Machines and 134-5640 Hose Assembly Machines (100 Ton) from Sony Control to Crimputer Control{0374, 0599, 0684, 5057}
Set up and Basic Operation of the 145-5161 Floor Model Hose Machine {0374, 0599, 0684, 0738, 5057}
Set up and Basic Operation of the 145-5161 Floor Model Hose Machine {0374, 0599, 0684, 0738, 5057}
Using the 9U-5792, 4C-5052, 4C-5054, 4C-3670, and 4C-3680 Hydraulic Hose Machines{0374, 0599, 0684, 0738, 5057}
Using the 9U-5792, 4C-5052, 4C-5054, 4C-3670, and 4C-3680 Hydraulic Hose Machines{0374, 0599, 0684, 0738, 5057}
Reuse And Salvage Guidelines
Crimputer III Setup and Operation{0684, 5057}
Crimputer III Setup and Operation{0684, 5057}
Contamination Control Guidelines
Hose Products Reference Guide {0374, 0599, 0684, 0738, 5057}
Hose Products Reference Guide {0374, 0599, 0684, 0738, 5057}
Service Magazine
Color Coded Dust Caps for S&middot;O&middot;S Ports Will Be Available {7770}
2003/12/01
Information Release Memo, HOS04-02, "XT-6 Hose and Couplings to XT-6 ES Components" Is Available {5057}
2004/06/21
Information Release Memo, PELJ0340 , "Reusable Couplings for Caterpillar -12 and -16 XT-6 ES Hose" {5057}
2004/06/28
Five New Wrenches Remove Snap To Connect Couplings from Hydraulic Hose Assemblies {0602, 0738, 5057}
2006/02/13
Caterpillar Hose and Coupling Practices {0618, 1000, 5057, 7000}
2008/05/26
Hydraulic Hose Suppression Sleeves for Certain Machines are Now Available {5057}
Hydraulic Hose Suppression Sleeves for Certain Machines are Now Available {5057}

Caterpillar Parts SIS Catalog 130G :

LINES GP-HYDRAULIC
2G-3430 LINES GP-HYDRAULIC
HYDRAULIC BLADE TIP LINES GROUP
2G-1610 HYDRAULIC BLADE TIP LINES GROUP
LINES GP-HYDRAULIC
2G-3450 LINES GP-HYDRAULIC
LINES GP-HYDRAULIC
2G-3450 LINES GP-HYDRAULIC
LINES GP-HYDRAULIC
2G-3450 LINES GP-HYDRAULIC
HYDRAULIC POWER BLADE LINES GROUP
8D-8640 HYDRAULIC POWER BLADE LINES GROUP
CYLINDER GP-BLADE TIP
9J-3466 CYLINDER GP-BLADE TIP
CYLINDER & MOUNTING GP
7D-9955 CYLINDER & MOUNTING GP
SWIVEL GP
8J-0384 SWIVEL GP
CYLINDER & MOUNTING GP
8D-3310 CYLINDER & MOUNTING GP
CYLINDER & MOUNTING GP
8D-3310 CYLINDER & MOUNTING GP
CYLINDER GP-STEER
3G-8069 CYLINDER GP-STEER
CYLINDER GP-STEER
3G-8070 CYLINDER GP-STEER
STEERING CYLINDER GROUP
8J-5538 STEERING CYLINDER GROUP
STEERING CYLINDER GROUP
8J-8820 STEERING CYLINDER GROUP
STEERING CONTROL GROUP
8D-7530 STEERING CONTROL GROUP

Truck sale:

Caterpillar 130G
 
Caterpillar 130G
- motor graders
PETERSON CAT
 
28.500 
Caterpillar 130G, bergbau-motorgrader, Bau-Und Bergbauausrüstung


Caterpillar 130G, Construction
34,000 
Caterpillar 130G, Construction
- motor graders
PETERSON CAT
 
55,000 
Caterpillar HM 329130G, Construction
- hammer
WHEELER MACHINERY CO.
Caterpillar 130G, Construction
37,883 
Caterpillar 130G, Construction
- motor graders
EMPIRE MACHINERY
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.