AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

9D6505 POWER BLADE AND TIP CIRCLE GROUP--Type 3 Part of 2C8253 Blade and Tip Arrangement listed on Page 210 2G3978 Circle and Beam parts are shown on Pages 213 & 214 AN ATTACHMENT 130G


IMPLEMENTS
CIRCLE GP
OPERATOR STATION
CAB GP
ROPS/FOPS GP

MOTOR GRADER 130G MOTOR GRADER 12W
 130G MOTOR GRADER 12W00001-00695 (MACHINE) POWERED BY 3304 ENGINE SEBP1063 130G 12W   (1975)

IMPLEMENTS

CIRCLE GP
CIRCLE GP
9D-6375 CIRCLE GP
CIRCLE GP
9D-6505 CIRCLE GP
CIRCLE GP
9D-6505 CIRCLE GP
CIRCLE GP
9D-6505 CIRCLE GP
CIRCLE GP
9D-6505 CIRCLE GP
CIRCLE ASSEMBLY
9D-6427 CIRCLE ASSEMBLY
CIRCLE AND BEAM ASSEMBLY
2G-3978 CIRCLE AND BEAM ASSEMBLY
CIRCLE AND BEAM ASSEMBLY
2G-3978 CIRCLE AND BEAM ASSEMBLY
 

#SEBP10630590
 

9D-6505: CIRCLE GP

9D6505 POWER BLADE AND TIP CIRCLE GROUP--Type 3
Part of 2C8253 Blade and Tip Arrangement listed on Page 210
2G3978 Circle and Beam parts are shown on Pages 213 & 214
AN ATTACHMENT
c224326 SEBP1063
9D6505 CIRCLE GP Parts scheme
  For full view, you need register

Parts for your 130G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0S-1619 [2] BOLT  
  3B-4506 [2] LOCKWASHER  
2. 2G-3978 Y [1] CIRCLE ASSEM.  
    (Separate Illustration)
3. 9S-1366 [2] BOLT  
  1H-7855 [2] SPACER 3.51 cm(1.38 in.) long  
  8F-4028 [2] SPACER .64 cm(.25 in.) long  
4. 3B-4508 [44] LOCKWASHER  
5. 4B-5273 [6] WASHER  
6. 8D-5862 [1] GUARD ASSEM.  
7. 6H-1717 [42] BOLT 2.86 cm(1.125 in.) long  
8. 5D-0134 [4] STRIP (end)  
  9D-6638 [1] STRIP (center)  
9. 2G-8786 C [1] BRACKET ASSEM.  
    (Includes)
10. 8S-9092 [2] BOLT 5.72 cm(2.25 in.) long  
  1A-8537 [2] BOLT 6.99 cm(2.75 in.) long  
  3B-4510 [4] LOCKWASHER  
11. 5D-6644 [10] SHIM  
12. 8D-5863 [1] GUARD ASSEM.  
13. 6D-5415 [10] PLATE  
14. 8D-5949 [1] BAR  
15. 2G-3221 [5] SHIM .15 cm(.06 in.) thick  
16. 7F-0482 [4] NUT  
17. 3B-4647 C [2] COTTER PIN  
18. 2B-2673 [2] NUT  
  1D-0503 [2] WASHER  
19. 2G-8731 C [1] BRACKET (L.H.)  
  2G-8729 C [1] BRACKET (R.H.)  
20. 1D-4641 C [2] BOLT  
  6K-3632 C [2] NUT  
  0S-1822 [2] WASHER .64 cm(.25 in.) thick  
  7D-1446 [2] WASHER .48 cm(.188 in.) thick  
  C   INDICATES CHANGE
  Y   SEPARATE ILLUSTRATION
 

#SEBP10630591
 

9D-6427: CIRCLE ASSEMBLY

9D6427 CIRCLE ASSEMBLY--Replaced by 2G3978
Part of 9D6505 Power Blade and Tip Circle Group shown on Page 212
AN ATTACHMENT
c172503 SEBP1063
9D6427 CIRCLE ASSEMBLY Parts scheme
  For full view, you need register

Parts for your 130G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7B-5037 [2] LOCK  
2. 8D-0461 [1] BRACE ASSEM.  
3. 9D-3221 [1] BRACKET  
4. 4D-4375 [2] LUG  
5. 6D-6547 [2] BEARING  
6. 6D-1886 [2] STOP  
7. 8D-3093 [2] SPACER  
  9D-2185 [2] SHIM 2.54 mm(.1 in.) thick  
  9D-2186 [2] SHIM 1.27 mm(.05 in.) thick  
  6G-3044 CH [1] SEGMENT (circle gear)  
    (7 teeth not shown service, repair for worn or damaged teeth)
  C   INDICATES CHANGE
  H   NOT PART OF 9D6427 POWER BLADE
 

#SEBP10630592
 

2G-3978: CIRCLE AND BEAM ASSEMBLY

2G3978 CIRCLE AND BEAM ASSEMBLY--Type 1
Part of 9D6505 Power Blade and Tip Circle Group shown on Pages 212A & 212B
AN ATTACHMENT
c159239 SEBP1063
2G3978 CIRCLE AND BEAM ASSEMBLY Parts scheme
  For full view, you need register

Parts for your 130G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7B-5037 [2] LOCK  
2. 6D-4689 [1] BRACE  
3. 2G-3971 [1] BRACKET ASSEM.  
4. 4D-4375 [2] LUG  
5. 6D-6547 [2] BEARING  
6. 6D-1886 [2] STOP  
7. 8D-3093 [2] SPACER  
  9D-2185 [2] SHIM 2.54 mm(.100 in.) thick  
  9D-2186 [2] SHIM 1.27 mm(.050 in.) thick  
8. 7B-5036 [2] SHAFT  
 

#SEBP10630593
 

2G-3978: CIRCLE AND BEAM ASSEMBLY

2G3978 CIRCLE AND BEAM ASSEMBLY--Type 2
Part of 9D6505 Circle Group shown on Page 212A
c172505 SEBP1063
2G3978 CIRCLE AND BEAM ASSEMBLY Parts scheme
  For full view, you need register

Parts for your 130G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2G-3971 [1] BRACKET ASSEM.  
2. 6D-6547 [2] BEARING  
3. 6D-1886 [2] STOP  
4. 9D-6426 C [1] CIRCLE ASSEM.  
5. 7B-5037 [2] LOCK  
6. 6D-4689 [1] BRACE  
7. 4D-4375 [2] LUG  
8. [2] SPACER  
  9D-2185 [2] SHIM 2.54mm(.1 in.) thick  
  9D-2186 [2] SHIM 1.27mm(.05 in.) thick  
9. 7B-5036 [2] SHAFT  
  6G-3044 CH [1] SEGMENT (circle gear)  
    (7 teeth-not shown-service repair for worn or damaged teeth)
  C   INDICATES CHANGE
  H   NOT PART OF 2G3978 CIRCLE AND
 

#SEBP10630594
 

2C-8095: MOUNTING AND CAB GROUP

2C8095 MOUNTING AND CAB GROUP
S/N 12W1-12W481 INCL.
2C8096 Cab parts are shown on Pages 216 & 217
c207774 SEBP1063
2C8095 MOUNTING AND CAB GROUP Parts scheme
  For full view, you need register

Parts for your 130G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8D-7867 [1] BRACKET ASSEM.  
    (Includes)
2. 4K-9097 [4] NUT  
3. 6D-2928 [15] BOLT  
  3D-5074 [15] NUT  
  4B-4276 [15] WASHER  
4. 4M-0061 [18] BOLT  
  5S-7384 [18] LOCKWASHER  
  4B-4277 [18] WASHER  
5. 8D-7875 [1] SEAL  
6. 9D-9198 [2] PLATE  
7. 8D-7862 [2] ANGLE ASSEM.  
    (Each Includes)
8. 4K-9097 [2] NUT  
9. 8D-7874 [2] SEAL  
10. 8D-7873 [2] SEAL  
11. 8D-7868 [1] BRACKET ASSEM. (R.H.)  
    (Includes)
12. 4K-9097 [2] NUT  
13. 8D-7869 [1] BRACKET ASSEM. (L.H.)  
    (Includes)
14. 4K-9097 [2] NUT  
15. 8D-7899 [2] PAD  
16. 9D-1589 [2] MOUNTING  
17. 7D-0734 [2] WASHER  
18. 1B-4367 [2] BOLT  
19. 2C-8096 Y [1] CAB GROUP  
    (Separate Illustration)
20. 8D-7898 [2] PAD  
21. 1D-4643 [4] BOLT  
22. 8D-8263 [4] WASHER  
23. 8D-8264 [4] MOUNTING  
24. 8D-7892 [1] PAD  
  Y   SEPARATE ILLUSTRATION
 

#SEBP10630595
 

2C-8095: MOUNTING AND CAB GROUP

2C8095 MOUNTING AND CAB GROUP
Serial No. 12W482 - 12W544 incl.
2C8096 Cab parts are shown on Pages 216 and 217
c175762 SEBP1063
2C8095 MOUNTING AND CAB GROUP Parts scheme
  For full view, you need register

Parts for your 130G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8D-7867 [1] BRACKET ASSEM.  
    (Includes)
2. 4K-9097 [4] NUT  
3. 6D-2928 [15] BOLT  
  3D-5074 [15] NUT  
  4B-4276 [15] WASHER  
4. 4M-0061 [18] BOLT  
  5S-7384 [18] LOCKWASHER  
  4B-4277 [18] WASHER  
5. 8D-7875 [1] SEAL  
6. 2G-5449 C [2] PLATE  
7. 2G-5442 C [2] ANGLE ASSEM.  
    (Each Includes)
8. 4K-9097 [2] NUT  
9. 2G-5437 C [2] SEAL  
10. 8D-7873 [2] SEAL  
11. 8D-7868 [1] BRACKET ASSEM. (R.H.)  
    (Includes)
12. 4K-9097 [2] NUT  
13. 8D-7869 [1] BRACKET ASSEM. (L.H.)  
    (Includes)
14. 4K-9097 [2] NUT  
15. 2G-8641 C [2] PAD  
16. 9D-1589 [2] MOUNTING  
17. 7D-0734 [2] WASHER  
18. 1B-4367 [2] BOLT  
19. 2C-8096 Y [1] CAB GROUP  
    (Separate Illustration)
20. 2G-8643 C [2] PAD  
21. 1D-4634 C [4] BOLT  
22. 7D-3019 C [4] WASHER  
23. 8D-8264 [4] MOUNTING  
24. 2G-8642 C [1] PAD  
  C   INDICATES CHANGE
  Y   SEPARATE ILLUSTRATION
 

#SEBP10630596
 

2C-8300: MOUNTING AND CAB GROUP

2C8300 MOUNTING AND CAB GROUP
Serial No. 12W545 to 12W623 incl.
2C8096 Cab parts are shown on Pages 216 and 217
c223360 SEBP1063
2C8300 MOUNTING AND CAB GROUP Parts scheme
  For full view, you need register

Parts for your 130G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2C-8096 Y [1] CAB GROUP  
    (Separate Illustration)
2. 2G-8643 [2] PAD  
3. 2G-8642 [1] PAD  
4. 8D-8264 [4] MOUNTING  
5. 7D-3019 [4] WASHER  
6. 1D-4634 [4] BOLT  
7. 1B-4367 [2] BOLT  
8. 7D-0734 [2] WASHER  
9. 9D-1589 [2] MOUNTING  
10. 2G-8641 [2] PAD  
11. 2G-7097 [1] PAD  
12. 2G-7098 [2] PAD  
  Y   SEPARATE ILLUSTRATION
 

#SEBP10630597
 

2C-8296: ROLL-OVER PROTECTIVE STRUCTURE ARRANGEMENT

2C8296 ROLL-OVER PROTECTIVE STRUCTURE ARRANGEMENT--
Enclosed. Serial No. 12W502-Up
AN ATTACHMENT
SEBP10630597 SEBP1063
  For full view, you need register

Parts for your 130G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  2C-8294 Y [1] MIRROR GROUP  
  9D-5195 Y [1] ROPS ARRANGEMENT  
  2G-8010 Y [1] REAR WIPER GROUP  
  Y   SEPARATE ILLUSTRATION
 

#SEBP10630598
 

9D-5195: ROPS AR

9D5195 ROLL-OVER PROTECTIVE STRUCTURE ARRANGEMENT--
Enclosed. Serial No. 12W502-Up
Part of 2C8296 ROPS Arrangement listed on Page 215C
AN ATTACHMENT
SEBP10630598 SEBP1063
  For full view, you need register

Parts for your 130G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  8D-7550 Y [1] WINDSHIELD GROUP  
  8D-7690 Y [1] WIPER GROUP  
  8D-8290 Y [1] LIGHTING GROUP  
  9D-0570 Y [1] PANEL GROUP  
  9D-1240 Y [1] ROPS GROUP  
    - or -
  2G-9890 Y [1] ROPS GROUP  
  9D-1365 Y [1] DOOR GROUP  
  9D-1385 Y [1] PANEL GROUP  
  9D-3330 Y [1] FAN GROUP  
  9D-3580 Y [1] WIRING GROUP  
  2G-5350 Y [1] WASHER GROUP  
  2G-6050 Y [1] LINER GROUP  
  2G-8245 Y [1] MIRROR GROUP  
  6G-0270 Y [1] INSULATION GROUP  
  Y   SEPARATE ILLUSTRATION
 

#SEBP10630599
 

9D-1240: ROLLOVER GP-ENCLOSED

9D1240 ROLL-OVER PROTECTIVE SYSTEM GROUP--Enclosed
Serial No. 12W502-Up
Part of 9D5195 ROPS Arrangement listed on Page 215C-1
AN ATTACHMENT
c169332 SEBP1063
9D1240 ROLLOVER GP-ENCLOSED Parts scheme
  For full view, you need register

Parts for your 130G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9D-2821 [1] PLATE  
2. 4M-5283 [2] BOLT  
  4L-6458 [2] NUT  
3. 1L-4789 [2] LOCKWASHER  
4. 5H-4871 [4] PLUG  
5. 6D-2928 [15] BOLT  
  3D-5074 [15] NUT  
  4B-4276 [15] WASHER  
6. 2G-5437 C [2] SEAL  
7. 8D-7875 [1] SEAL  
8. 8D-7873 [2] SEAL  
9. 1B-4367 [2] BOLT  
  7D-0734 [2] WASHER  
  9D-1589 [2] MOUNTING  
10. 4M-0061 C [18] BOLT  
  4B-4277 C [18] WASHER  
11. 8D-7867 [1] BRACKET ASSEM.  
12. 8D-7868 [1] BRACKET ASSEM. (R.H.)  
  8D-7869 [1] BRACKET ASSEM. (L.H.)  
13. 2G-5442 C [2] ANGLE ASSEM.  
    (Each Includes)
  4K-9097 [2] NUT  
14. 2G-5449 C [2] PLATE  
15. 5S-7384 [18] LOCKWASHER  
16. 2G-8641 C [2] PAD  
17. 2G-8643 C [2] PAD  
18. 1D-4643 [6] BOLT  
  8D-8263 [6] WASHER  
19. 8D-8264 [6] MOUNTING  
20. 2G-8642 C [1] PAD  
  C   INDICATES CHANGE
 

Information:

Operation and Maintenance Manual
Foreword
CIRCLE AND DRAWBAR
When Required
CIRCLE AND DRAWBAR
Special Instruction
Reinforcement Of Motor Grader Circle Shoe Mounting Plates{6150, 6153}
Reinforcement Of Motor Grader Circle Shoe Mounting Plates{6150, 6153}
Modification And Installation Of Drawbar And Yoke Assemblies And Installation Of 6G4524 Wear Strips, 6G4525 Wear Strips (Aluminium Bronze) And 6G4526 Circle Shoes{6153, 6155}
Modification And Installation Of Drawbar And Yoke Assemblies And Installation Of 6G4524 Wear Strips, 6G4525 Wear Strips (Aluminium Bronze) And 6G4526 Circle Shoes{6153, 6155}
Installation of Circle Repair Segments For Certain Motor Graders {6152, 6152}
Installation of Circle Repair Segments For Certain Motor Graders {6152, 6152}
Specifications
Drive For The Circle
12G, 130G, 140G MOTOR GRADERS HYDRAULIC SYSTEM AND STEERING
Circle Drive Group
12G, 120G, 130G & 140G MOTOR GRADERS HYDRAULIC SYSTEM & STEE
Circle Drive With Slip Clutch Group (Attachment)<BR> (5T0570 - 12G, 120G, 130G, 140G)
12G, 120G, 130G & 140G MOTOR GRADERS HYDRAULIC SYSTEM & STEE
Circle Group
12G, 120G, 130G & 140G MOTOR GRADERS HYDRAULIC SYSTEM & STEE
Reuse And Salvage Guidelines
Procedure to Repair Worn Blade Circles for Series G Motor Graders{5207, 6154}
Procedure to Repair Worn Blade Circles for Series G Motor Graders{5207, 6154}
Disassembly and Assembly
Swivel Joint
12G, 120G, 130G & 140G MOTOR GRADER VEHICLE SYSTEMS
Circle Drawbar
12G, 120G, 130G & 140G MOTOR GRADER VEHICLE SYSTEMS
Circle Drive Motor
12G, 120G, 130G & 140G MOTOR GRADER VEHICLE SYSTEMS
Circle Drive
12G, 120G, 130G & 140G MOTOR GRADER VEHICLE SYSTEMS
Circle Drive And Blade Sideshift Lock Check Valves
12G,130G & 140G MOTOR GRADERS VEHICLE SYSTEMS
Circle
12G,130G & 140G MOTOR GRADERS VEHICLE SYSTEMS
Circle Drawbar
12G,130G & 140G MOTOR GRADERS VEHICLE SYSTEMS
Circle Drawbar Bolt
12G,130G & 140G MOTOR GRADERS VEHICLE SYSTEMS
Circle Drawbar Bolt
12G,130G & 140G MOTOR GRADERS VEHICLE SYSTEMS
Circle Drive Motor (Earlier)
12G,130G & 140G MOTOR GRADERS VEHICLE SYSTEMS
Circle Drive Motor (Later)
12G,130G & 140G MOTOR GRADERS VEHICLE SYSTEMS
Circle Drive
12G,130G & 140G MOTOR GRADERS VEHICLE SYSTEMS
Circle Drive (Earlier)
12G,130G & 140G MOTOR GRADERS VEHICLE SYSTEMS
Circle Drive (Later)
12G,130G & 140G MOTOR GRADERS VEHICLE SYSTEMS
Service Magazine
One-Piece Shaft And Lower Brace Made From A Tube Are Now Used In The Circle And Beam Assembly{6154}
1980/04/14
Reinforcement Plate Can Be Installed On Circle Drawbar{6153}
1980/05/26
Front 120&deg; Of Circle Assembly Is Now Heat Treated; Lower Brace Has A Tube And A One-Piece Shaft{6154}
1980/06/02
New Drawbar And Yoke Assembly Has Improved Ball Joint; New Wear Strips Used Between Circle And Drawbar{6153,6154,6155,6170,6171}
1980/08/25
Different Caps And Adapters For Ball Studs On Circle Drawbars Can Be Used Without Plastic Inserts{6170,6171}
1980/11/10
Slip Clutches Now Available On Circle Drive Group{5058,5237,5207,6154}
1981/02/09
New Circle Guide Shoes Can Be Adjusted For Better Control Of Clearance Between Circle Teeth And Drive Pinion{6155,6153}
1981/07/13
6V6037, 6V6038, And 6V6039 Template Available For Installation Of Circle Tooth Segments{0626,6152}
1982/05/10
Improved Circle Tooth Segment{6152}
1982/08/16
New Shims Available To Make Drawbar Wear Strips Level{6153}
1982/09/06
New, Narrower Blade Tip Brackets Used{5254,6154}
1982/10/11
New Drawbar Group Has Several Improvements{6153,6155}
1982/10/11
Lubrication Of Bronze Alloy Wear Strips Is Not Necessary{6155}
1984/01/30
Less Oil Used In Circle Drive Group To Prevent Leakage Through Vent Assembly{5207}
1984/01/30
Replacement Circle Guide Shoes And Bronze Alloy Wear Strips Available For Parts Service{6150,6154,6155}
1984/09/17
Lubrication Of Circle Drive Pinion And Wear Strips; Wear Strip Clearance Adjustment{5207,6155}
1984/11/05
Order The Correct Replacement Parts For Piston Motor Groups In The Circle Drive{5058}
1984/11/19
Hydraulic Motor And Lines Changed For Circle Drive{5050,5200}
1977/04/11
Correct Adjustment And Lubrication Will Improve Circle Component Life {5207,6154}
1987/08/03
Procedure To Test And Adjust Circle Drive Slip Clutch{5207}
1987/08/10
New Circle Drive Pinions Have Longer Service Life {5207}
1988/09/26
Circle Segments Are Now Available To Make Repairs To Circles That Have Cracked Or Broken Teeth{6154}
1979/02/05
New Seal Ring Used In Gerotor Motor Group For Circle Drive{5050,5200}
1979/04/02
More Information About Use Of Shims With New One-Piece Wear Strips In Circle Groups For Hydraulic Sideshift Moldboards{6154,6151}
1979/07/02
Items To Check If Excessive Effort Is Required To Operate Circle Drive Motor{5050,5235}
1989/01/30
Stronger Bracket Assembly Used In Circle Groups{6150,6154}
1989/09/18
Circle Repair Segments Available{6152,6154}
1990/04/16
Replaceable Sleeve Bearings Can Be Installed In The Circle Assembly And Moldboard Rail Brackets {6154,6157}
1994/02/21
6G-2943 Circle Assembly Can Be Reinforced To Improve Service Life In Severe Applications {6154,6157}
1994/02/28
Circle Drive Unit Cover Can Be Modified To Prevent Oil Loss Through The Vent{5201,5209}
1994/03/07
New Splined Circle Drive Group Provides Improved Performance {5207}
1995/04/10
Supplement For Special Instruction, &quot;Installation Of Circle Repair Segments&quot;{6154,6152}
1998/07/06
Correction to the Service Magazine , "Replaceable Sleeve Bearings Can Be Installed In The Circle Assembly And Moldboard Rail Brackets" {6154, 6157}
2001/08/13
Special Instruction, SEHS7268, "Installation of Circle Repair Segments" Is Now Available {6152, 6154}
2004/05/03
Circle Tooth Profile and the Correct Use of Templates for the Installation of Circle Segments For Certain Motor Graders {6152, 6152}
2012/03/20
Installation of Circle Repair Segments {6152}
2008/03/31

Caterpillar Parts SIS Catalog 130G :

CIRCLE GP
9D-6505 CIRCLE GP
CIRCLE GP
9D-6505 CIRCLE GP
BLADE GROUP
9D-1605 BLADE GROUP
BLADE GROUP
9D-1605 BLADE GROUP
7D-6671 BIT GP-END
2C-8253 BLADE AND TIP ARRANGEMENT
PLATE GP-PUSH
9D-3600 PLATE GP-PUSH
SCARIFIER GP
2G-6575 SCARIFIER GP
CIRCLE ASSEMBLY
9D-6427 CIRCLE ASSEMBLY
CIRCLE AND BEAM ASSEMBLY
2G-3978 CIRCLE AND BEAM ASSEMBLY
CIRCLE AND BEAM ASSEMBLY
2G-3978 CIRCLE AND BEAM ASSEMBLY
MOUNTING AND CAB GROUP
2C-8095 MOUNTING AND CAB GROUP
MOUNTING AND CAB GROUP
2C-8095 MOUNTING AND CAB GROUP
MOUNTING AND CAB GROUP
2C-8300 MOUNTING AND CAB GROUP
2C-8296 ROLL-OVER PROTECTIVE STRUCTURE ARRANGEMENT
9D-5195 ROPS AR

Truck sale:

Caterpillar 130G
 
Caterpillar 130G
- motor graders
PETERSON CAT
 
28.500 
Caterpillar 130G, bergbau-motorgrader, Bau-Und Bergbauausrüstung


Caterpillar 130G, Construction
34,000 
Caterpillar 130G, Construction
- motor graders
PETERSON CAT
 
55,000 
Caterpillar HM 329130G, Construction
- hammer
WHEELER MACHINERY CO.
Caterpillar 130G, Construction
37,883 
Caterpillar 130G, Construction
- motor graders
EMPIRE MACHINERY
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.