5T563 ROPS CONVERSION ARRANGEMENT-Open-Low Profile - Field Installation 130G MOTOR GRADER

Part No	Qty	Parts name
6G-2210 Y	[1]	ROPS GROUP- ENCLOSED
6G-2595 Y	[1]	CAB DOOR GROUP
6G-2615 Y	[1]	CAB LINER
6G-2575 Y	[1]	WINDSHIELD WIPER GROUP
6G-2570 Y	[1]	WINDSHIELD WASHER GROUP
6G-2565 Y	[1]	CAB PANEL GROUP-TINTED
2G-8245 Y	[1]	MIRROR GROUP- REAR VIEW
6G-5810 Y	[1]	CAB WIRING GROUP
5T-0819 Y	[1]	WIRING HARNESS-CAB RETROFIT
6G-6751	[1]	FLOORMAT
5T-1248	[1]	GLASS
5P-0821	[41DM]	SEAL
Y		SEPARATE ILLUSTRATION

#SEBP10630612

5T-0819: HARNESS AS-WIRING

HARNESS AS-WIRING

5T819 HARNESS ASSEMBLY - Cab Retrofit
Part of 5T566 & 5T567 ROPS Conversion Arrangements
listed on Page 215P-1 & on Page 215N

c180316 SEBP1063

For full view, you need register

Parts for your 130G MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7N-7779	[5]	SOCKET
	7N-7780	[5]	PIN
2.	9G-3673	[1]	HOUSING
3.	3D-4467	[4]	TERMINAL
4.	2L-8066	[1]	TERMINAL
5.	6B-2759	[1]	TERMINAL
6.	2L-8075	[3]	TERMINAL
7.	4S-1988	[2]	TERMINAL
			THE FOLLOWING WIRES ARE AVAILABLE:
	5P-5624 H		WIRE (14 gauge)
	5P-5623 H		WIRE (16 gauge)
	5P-5677 H		WIRE (18 gauge)
	H		ORDER BY THE METER

#SEBP10630613

2C-8096: CAB GROUP

CAB GROUP

2C8096 CAB GROUP--R.O.P.S.--Part 1 of 2
Part of 2C8095 Mounting and Cab Group shown on Page 215
8D7550 Cab Windshield parts are shown on Page 226. Note: 2G2045 Floormat is used

c207779 SEBP1063

For full view, you need register

Parts for your 130G MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	4K-9097 H	[7]	NUT
2.	8D-7550 Y	[1]	WINDSHIELD GROUP
			(Separate Illustration)
3.	9D-4967	[1]	LINK ASSEM. (L.H.)
	9D-4968	[1]	LINK ASSEM. (R.H.)
4.	4L-6499	[2]	WASHER (plain)
	5D-2751	[2]	WASHER (spring)
5.	3B-4609	[2]	COTTER PIN
6.	8D-2078	[2]	SEAL
7.	0S-1615	[4]	BOLT
	3B-4504	[4]	LOCKWASHER
	5B-2903	[6]	SHIM
8.	9D-1548	[2]	PLATE
9.	4B-1243	[8]	SCREW
	3B-4503	[8]	LOCKWASHER
10.	9D-8849	[1]	LATCH (L.H.)
	9D-8848	[1]	LATCH (R.H.)
11.	9D-4966	[1]	HANDLE ASSEM. (L.H.)
			(Includes)
	2G-1674	[2]	KEY
12.	4B-1273	[4]	SCREW
13.	9S-4672 H	[4]	NUT
14.	9F-6445 H	[3]	NUT
15.	9D-4964	[1]	HANDLE (R.H. non-locking)
16.	2C-7908	[2]	SEAL (use as required)
	2C-7909		LOCKING STRIP (use as required)
17.	2C-8131	[2]	GLASS
18.	9D-5177	[2]	PLATE ASSEM.
	0L-1351	[4]	BOLT
	3B-4506	[4]	LOCKWASHER
19.	2C-8076	[2]	GLASS
20.	6B-9625 H	[1]	LUG
	2C-8097		CAB ASSEM.
			INCLUDES PARTS MARKED H IN BOTH PARTS ONE AND TWO
	Y		SEPARATE ILLUSTRATION

#SEBP10630614

2C-8096: CAB GROUP

CAB GROUP

2C8096 CAB GROUP--R.O.P.S.--Part 2 of 2
Part of 2C8095 Mounting and Cab Group shown on Page 215

c207780 SEBP1063

For full view, you need register

Parts for your 130G MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	2C-7908		SEAL (use as required)
	2C-7909		LOCKING STRIP (use as required)
2.	9D-1587	[2]	GLASS
3.	9D-1646	[1]	DOOR ASSEM. (R.H.)
			(Includes)
4.	1F-4910	[1]	GRAB IRON
5.	7K-3001	[1]	BAR
6.	9D-1647	[1]	DOOR ASSEM. (L.H.)
			(Includes)
7.	1F-4910	[1]	GRAB IRON
8.	7K-3001	[1]	BAR
9.	3B-1915	[2]	BOLT
	4B-4278	[4]	WASHER
	1B-8633	[8]	SHIM
10.	4J-8265	[4]	LOCKNUT
11.	2C-8118	[2]	PLATE
12.	2C-8119	[2]	SPRING
13.	3K-0925	[2]	WASHER
14.	9D-1542	[2]	HINGE
	9D-4606	[2]	SEAL
15.	6D-6581	[32]	RIVET
16.	1H-8299	[32]	SCREW
	1B-4330	[32]	NUT
	3B-4504	[32]	LOCKWASHER
	4B-4276	[32]	WASHER
17.	9D-1588	[2]	GLASS
18.	8D-2079	[4]	SEAL
19.	1B-4333 H	[4]	NUT
20.	2C-7902	[4]	GLASS
21.	9D-3523 H	[2]	WASHER
22.	8D-5382 H	[2]	BOSS
23.	8F-9836 H	[3]	LUG
24.	9D-0469	[1]	GLASS
	2C-8097		CAB ASSEM.
			INCLUDES PARTS MARKED H IN BOTH PARTS TWO AND ONE

#SEBP10630615

2C-8298: CAB GROUP

CAB GROUP

2C8298 CAB GROUP--Part 1 of 2
Serial No. 12W624-Up
Part of 2C8300 Mounting and Cab Group shown on Page 215F
8D7550 Cab Windshield parts are shown on Page 226

c229766 SEBP1063

For full view, you need register

Parts for your 130G MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	9F-2978 H	[1]	NUT
2.	8D-7550 Y	[1]	WINDSHIELD GROUP
			(Separate Illustration)
3.	6G-5367	[1]	LINK ASSEM. (L.H.)
	6G-5368	[1]	LINK ASSEM. (R.H.)
4.	4L-6499	[2]	WASHER (plain)
	5D-2751	[2]	WASHER (spring)
5.	3B-4609	[2]	COTTER PIN
6.	8D-2078	[2]	SEAL
7.	0S-1615	[4]	BOLT
	3B-4504	[4]	LOCKWASHER
	5B-2903	[6]	SHIM
8.	9D-1548	[2]	PLATE
9.	4B-1243	[8]	SCREW
	3B-4503	[8]	LOCKWASHER
10.	6G-5369	[1]	LATCH (L.H.)
	9D-8848	[1]	LATCH (R.H.)
11.	9D-4966	[1]	HANDLE ASSEM. (L.H.)
			(Includes)
	2G-1674	[2]	KEY
12.	4B-1273	[4]	SCREW
13.	7D-9595 H	[2]	NUT
14.	9F-6445 H	[2]	NUT
15.	9D-4964	[1]	HANDLE (R. H. -non-locking)
16.	5P-5906 J		SEAL (use as required)
17.	2C-8131	[2]	GLASS
18.	9D-5177	[2]	PLATE ASSEM.
	0L-1351	[4]	BOLT
	3B-4506	[4]	LOCKWASHER
19.	2C-8076	[2]	GLASS
	2C-8295		CAB ASSEM.
			INCLUDES PARTS MARKED H IN BOTH PARTS ONE AND TWO.
	J		ORDER BY THE METER
	Y		SEPARATE ILLUSTRATION

#SEBP10630616

2C-8298: CAB GROUP

CAB GROUP

2C8298 CAB GROUP--Part 2 of 2
Serial No. 12W624-Up
Part of 2C8300 Mounting and Cab Group shown on Page 215F

c229767 SEBP1063

For full view, you need register

Parts for your 130G MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	5P-5906 J		SEAL (use as required)
2.	9D-1587	[2]	GLASS
3.	9D-1646	[1]	DOOR ASSEM. (R.H.)
4.	1F-4910	[1]	GRAB IRON
5.	7K-3001	[1]	BAR
6.	9D-1647	[1]	DOOR ASSEM. (L.H.)
7.	1F-4910	[1]	GRAB IRON
8.	7K-3001	[1]	BAR
9.	9D-5178	[2]	BRACKET
10.	9D-5193	[1]	LATCH (R.H.)
	9D-5194	[1]	LATCH (L.H.)
11.	4B-1244	[8]	SCREW
12.	0S-1617	[8]	BOLT
	5P-4116	[8]	WASHER
13.	4B-2051	[8]	NUT
	3B-4503	[8]	LOCKWASHER
14.	9D-1542	[2]	HINGE
	9D-4606	[2]	SEAL
15.	6D-6581	[32]	RIVET
16.	1H-8299	[32]	SCREW
	1B-4330	[32]	NUT
	3B-4504	[32]	LOCKWASHER
	4B-4276	[32]	WASHER
17.	9D-1588	[2]	GLASS
18.	8D-2079	[4]	SEAL
19.	1B-4332 H	[4]	NUT
20.	2C-7902	[4]	GLASS
21.	8F-9836 H	[3]	LUG
22.	9D-0469	[1]	GLASS
23.	2G-7801	[2]	HANDLE
	9D-5182	[2]	STRIP
	2G-7842	[2]	RETAINER
	2G-7843	[2]	BALL
24.	6P-6256	[2]	RETAINER
	4B-5271	[2]	WASHER
	2C-8295		CAB ASSEM.
			INCLUDES PARTS MARKED H IN BOTH PARTS TWO AND ONE.
	J		ORDER BY THE METER

#SEBP10630617

2C-8298: CAB GROUP

CAB GROUP

2C8298 CAB GROUP - Part 1 of 2
Serial No. 12W670-Up
Part of 2C8300 Mounting and Cab Group shown on Page 215F
8D7550 Cab Windshield parts are shown on Page 226

c234190 SEBP1063

For full view, you need register

Parts for your 130G MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	9F-2978 H	[1]	NUT
2.	8D-7550 Y	[1]	WINDSHIELD GROUP
			(Separate Illustration)
3.	6G-5367	[1]	LINK ASSEM. (L.H.)
	6G-5368	[1]	LINK ASSEM. (R.H.)
4.	4L-6499	[2]	WASHER (plain)
	5D-2751	[2]	WASHER (spring)
5.	3B-4609	[2]	COTTER PIN
6.	8D-2078	[2]	SEAL
7.	0S-1615	[4]	BOLT
	3B-4504	[4]	LOCKWASHER
	5B-2903	[6]	SHIM
8.	9D-1548	[2]	PLATE
9.	4B-1243	[8]	SCREW
	3B-4503	[8]	LOCKWASHER
10.	6G-5369	[1]	LATCH (L.H.)
	9D-8848	[1]	LATCH (R.H.)
11.	9D-4966 C	[2]	HANDLE ASSEM.
			(Includes)
	2G-1674	[2]	KEY
12.	4B-1273	[4]	SCREW
13.	7D-9595 H	[2]	NUT
14.	9F-6445 H	[2]	NUT
15.	2C-8076	[2]	GLASS
16.	5P-5906 J		SEAL (use as required)
17.	2C-8131	[2]	GLASS
18.	9D-5177	[2]	PLATE ASSEM.
	0L-1351	[4]	BOLT
	3B-4506	[4]	LOCKWASHER
	2C-8295 H		CAB ASSEM.
			INCLUDES PARTS MARKED H IN BOTH PARTS ONE AND TWO.
	C		INDICATES CHANGE
	Y		SEPARATE ILLUSTRATION
	J		ORDER BY THE METER

#SEBP10630618

2C-8298: CAB GROUP

CAB GROUP

2C8298 CAB GROUP - Part 2 of 2
Serial No. 12W670-Up
Part of 2C8300 Mounting and Cab Group shown on Page 215F

c234191 SEBP1063

For full view, you need register

Parts for your 130G MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	5P-5906 J		SEAL
			(use as required)
2.	9D-1587	[2]	GLASS
3.	9D-1646	[1]	DOOR ASSEM. (R.H.)
4.	1F-4910	[1]	GRAB IRON
5.	7K-3001	[1]	BAR
6.	9D-1647	[1]	DOOR ASSEM. (L.H.)
7.	1F-4910	[1]	GRAB IRON
8.	7K-3001	[1]	BAR
9.	9D-5178	[2]	BRACKET
10.	9D-5193	[1]	LATCH (R.H.)
	9D-5194	[1]	LATCH (L.H.)
11.	4B-1244	[8]	SCREW
12.	0S-1617	[8]	BOLT
	5P-4116	[8]	WASHER
13.	4B-2051	[8]	NUT
	3B-4503	[8]	LOCKWASHER
14.	9D-1542	[2]	HINGE
	9D-4606	[2]	SEAL
15.	6D-6581	[32]	RIVET
16.	1H-8299	[32]	SCREW
	1B-4330	[32]	NUT
	3B-4504	[32]	LOCKWASHER
	4B-4276	[32]	WASHER
17.	9D-1588	[2]	GLASS
18.	8D-2079	[4]	SEAL
19.	1B-4332 H	[4]	NUT
20.	2C-7902	[4]	GLASS
21.	8F-9836 H	[3]	LUG
22.	9D-0469	[1]	GLASS
23.	2G-7801	[2]	HANDLE
	9D-5182	[2]	STRIP
	2G-7842	[2]	RETAINER
	2G-7843	[2]	BALL
24.	6P-6256	[2]	RETAINER
	4B-5271	[2]	WASHER
	2C-8295		CAB ASSEM.
			INCLUDES PARTS MARKED H IN BOTH PARTS TWO AND ONE.
	J		ORDER BY THE METER

#SEBP10630619

6G-0760: WEATHER INSULATION GROUP

WEATHER INSULATION GROUP

6G760 WEATHER INSULATION GROUP - Field Installation
Serial No. 12W1 to 12W544 inclusive

SEBP10630619 SEBP1063

For full view, you need register

Parts for your 130G MOTOR GRADER:

CATERPILLAR SIS

Part No	Qty	Parts name
6G-0255	[1]	BRACKET --PLATFORM AT GOVERNOR CONTROL HOUSING MOUNTING BRACKET
2G-8097	[1]	MOUNTING-- HYDRAULIC DUMP VALVE PLUNGER
5P-5774	[1]	PLUG (1.31" O.D.)
5P-9212	[3]	PLUG (1.73" O.D.)
6P-5560 A	[1]	GROMMET
6G-0266 A	[2]	SEAL
6G-0267 A	[4]	RETAINER
		-or-
7G-4326 A	[4]	PLATE
5P-2669 A	[8]	SCREW
		-or-
008-9792 A	[8]	SCREW
6G-0233 B	[1]	BOOT
6G-0255 B	[1]	TREADLE ASSEMBLY
B	[1]	BOOT
1B-2578 B	[2]	NUT
6G-0292 D	[1]	BOOT
6G-0293 D	[1]	RETAINER
5P-2669 D	[4]	SCREW
		-or-
008-9792 D	[4]	SCREW
6G-0292 E	[1]	BOOT
6G-1956 E	[1]	PAD
6G-0223 F	[2]	BRACKET
6G-0222 F	[2]	SEAL
7F-0192 F	[4]	BOLT
4D-1326 F	[4]	LOCKWASHER
1D-4717 F	[4]	NUT
2G-8307 F	[1]	PAD
5P-9261 F	[1]	GROMMET
6G-0208 G	[1]	BOOT
6G-0236 G	[1]	SEAL (USE AS REQUIRED)
6G-0237 G	[1]	SEAL (USE AS REQUIRED)
7K-1181 G	[1]	PLASTIC STRAP
A		CLUTCH AND BRAKE PEDAL
B		ACCELERATOR AND DECELERATOR PE
D		DIFFERENTIAL LOCK PEDAL
E		DECELERATOR PEDAL
F		HAND THROTTLE CONTROL ROD & TR
G		STEERING CONSOLE